Torqlink
Torqlink
Hydraulics
Catalog 1510-20
! WARNING
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR
RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system
options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review
the information concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications for
these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and
systems and assuring that all performance, safety and warning requirements of the application are met.
The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change
by Parker Hannifin Corporation and its subsidiaries at any time without notice.
Offer of Sale
The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated on the separate page of this document entitled "Offer of Sale".
1997, Parker Hannifin Corporation
PSLGC.PM6, dg, ki
110
Hydraulics
Catalog 1510-20
Index
Torqlink Series Small and Large Frame
Introduction
Small Frame
Quick Reference Data Chart
TA Series
4 15
TB Series
16 27
TD Series
28 40
Large Frame
Quick Reference Data Chart
41
TF Series
42 61
TG Series
62 82
TH Series
83 97
Accessories
98 99
100
100
Speed Sensor
101
Installation/Operation Information
102
Engineering Data
103 106
Offer of Sale
108
Warning
This Catalog is not a Controlled Document. All Dimensions listed herein are for reference only. Consult a
Sales engineer for detailed information.
PSLGC.PM6, dg, ki
Hydraulics
Catalog 1510-20
Introduction
Excellence of Design
The producers of Parker Hannifins TorqlinkTM
Series motors have a history of manufacturing
reliable, precision parts that stretches back over
ninety years. Milestones include the first patent on
roller vane rotor sets for low speed, high torque
hydraulic motors. That was thirty years ago. Today
the technological advances continue.
In the Development Laboratory, engineers continuously measure and analyze motor data to move
existing products to even higher levels of performance and to develop new products to serve the
ever changing needs of our customers. Design
integrity is assured by exhaustive testing on endurance stands. To be sure that this translates into
superior performance, advanced manufacturing
techniques are employed as well.
Excellence of Manufacturing
Central to manufacturing excellence is the understanding that quality parts make quality motors. The
instrumentation in our Quality Assurance laboratory
includes devices such as coordinate measuring
machines, to accurately measure the parts that we
manufacture as well as those that we purchase.
Quality cannot be inspected in, however. It must be
manufactured. Each machine operator is responsible for the quality of the part that comes off that
machine. Efficiency is enhanced by our cellular
manufacturing techniques. Accuracy is assured by
statistical process control methods. Micrometers
and specialized gages are at the disposal of the
operator. As a final check, every motor is tested
before shipment to our customer. Parker understands that our customers cannot produce quality
products unless we do.
PSLGC.PM6, dg, ki
Hydraulics
Catalog 1510-20
TA
TB
TD
45 - 392
(2.7 - 24.0)
45 - 392
(2.7 - 24.0)
45 - 392
(2.7 - 24.0)
86.2
(1250)
124.1
(1800)
137.9
(2000)
120.7
(1750)
165.5
(2400)
172.4
(2500)
215.2
(1905)
428.4
(3792)
444.6
(3935)
306.1
(2709)
524.5
(4642)
538.7
(4768)
Displacement
cc/rev
(cu in/rev)
45
(12)
45
(12)
57
(15)
57
(15)
57
(15)
76
(20)
Max Speed
RPM
810
785
835
625
(1405)
704
(1582)
1100
(2473)
PSLGC.PM6, dg, ki
Hydraulics
S
M
A
L
L
F
R
A
M
E
T
O
R
Q
L
I
N
K
Catalog 1510-20
Technical Information
T
A
S
E
R
I
E
S
Options
Features
Roller Vane Power Element For High Volumetric Efficiency and Long Life
TA Specifications
Code
Displacement
43
(2.7)
49
(3.0)
66
(4.0)
82
(5.0)
98
(6.0)
810
688
517
413
460
131
164
197
(8.0) (10.0) (12.0)
154
138
121
115
bar
(psid)
86.2
86.2
86.2
86.2
86.2
86.2
86.2
86.2
75.9
65.5
(1250) (1250) (1250) (1250) (1250) (1250) (1250) (1250) (1100) (950)
58.6
(850)
51.7
(750)
44.8
(650)
44.8
(650)
bar
(psid)
65.5
(950)
65.5
(950)
85.1
(753)
278
231
198
393
(24.0)
174
346
229
262
295
328
370
(14.0) (16.0) (18.0) (20.0) (22.6)
0390
39.8
(352)
47.8
(423)
65.8
(582)
100.3 137.6 172.7 205.1 215.2 211.3 208.2 205.5 198.5 207.0
(888) (1218) (1529) (1815) (1905) (1870) (1843) (1819) (1757) (1832)
56.0
(496)
66.5
(589)
91.5 118.6 140.1 191.7 238.4 286.1 297.9 306.1 300.2 296.1 290.4 296.2
(810) (1050) (1240) (1697) (2110) (2532) (2637) (2709) (2657) (2621) (2570) (2622)
PSLGC.PM6, dg, ki
Hydraulics
Catalog 1510-20
Technical Information
Maximum Side Load Capacity
Performance Data
S
E
R
I
E
S
Continuous
680
(1500)
Intermittent*
454
(1000)
-25.4
(-1)
T
A
0
(0)
25.4
(1)
50.8
(2)
76.2
(3)
101.6
(4)
0 2 4 6 8 10 12
Life In Millions Of Revolutions
PSLGC.PM6, dg, ki
Hydraulics
Catalog 1510-20
Performance Data
T
A
Code 0045
Code 0050
45 cc / rev
50 cc / rev
PRESSURE (BAR)
17.2 34.5 51.7 69.0 86.2 103.4 120.7
S
E
R
I
E
S
PRESSURE (BAR)
17.2 34.5 51.7 69.0 86.2 103.4 120.7
1.9
1.9
3.8
3.8
7.6
7.6
11.4
11.4
15.1
15.1
18.9
18.9
26.5
26.5
34.1
34.1
Flow (LPM)
Flow (LPM)
TORQUE
SPEED
(nm)
(RPM)
45.1
737
3.0 cu in / rev
2.7 cu in / rev
250
500
PRESSURE (PSI)
750 1000 1250 1500 1750
.5
63
29
138
15
209
5
452
8
68
68
146
54
221
43
294
32
363
18
414
113
478
94
70
145
157
131
239
120
318
108
394
93
464
74
530
50
348
218
416
202
482
182
67
222
155
209
241
197
322
186
401
170
475
151
548
125
279
321
352
307
424
292
492
272
61
300
154
286
247
275
335
263
418
247
496
228
568
202
199
421
277
411
351
397
425
381
496
360
56
378
151
364
245
352
336
340
423
324
506
305
582
278
108
612
185
602
264
591
341
577
416
559
489
537
41
533
137
518
233
507
328
494
420
478
507
458
589
432
92
794
169
783
249
771
325
756
399
737
471
714
24
688
122
673
218
661
313
648
405
632
492
612
577
585
250
500
PRESSURE (PSI)
750 1000 1250 1500 1750
.5
56
36
126
23
193
14
258
7
59
81
131
68
201
58
268
52
332
38
393
26
58
171
132
158
205
149
276
142
346
128
56
263
130
249
205
239
277
231
52
354
127
340
203
330
47
445
123
431
32
628
14
810
Flow (GPM)
Flow (GPM)
TORQUE
SPEED
(LB IN)
(RPM)
399
737
Hydraulics
Catalog 1510-20
Performance Data
Code 0065
T
A
Code 0080
65 cc / rev
80 cc / rev
PRESSURE (BAR)
PRESSURE (BAR)
17.2 34.5 51.7 69.0 86.2 103.4 120.7
1.9
1.9
3.8
3.8
7.6
7.6
11.4
11.4
15.1
15.1
18.9
18.9
26.5
26.5
34.1
34.1
Flow (LPM)
Flow (LPM)
TORQUE
SPEED
(nm)
(RPM)
4.0 cu in / rev
76.4
466
5.0 cu in / rev
PRESSURE (PSI)
PRESSURE (PSI)
250
500
250
500
.5
100
22
210
15
322
10
432
3
.5
132
19
274
15
417
11
558
8
697
3
104
51
217
44
331
38
444
31
555
21
666
12
138
43
286
38
433
34
579
30
721
25
859
18
108
109
226
102
344
95
460
88
574
78
687
67
795
53
140
89
294
84
448
80
600
75
749
70
895 1035
62
54
102
167
222
159
343
153
461
145
576
136
689
124
800
110
134
135
290
130
445
126
599
121
749
115
896 1038
108
99
93
226
218
217
342
210
464
202
582
193
697
181
808
166
123
182
284
176
443
172
600
167
753
161
904 1050
153 144
86
284
212
274
337
268
461
260
581
250
697
238
810
223
113
228
275
223
436
218
593
213
748
207
901 1049
199 189
67
400
194
390
320
383
446
374
569
365
688
352
803
336
88
321
250
315
411
310
569
304
726
298
879 1030
290 279
48
517
179
505
307
497
434
489
556
479
676
466
792
449
66
413
229
407
390
402
549
396
704
389
858 1007
381 369
Flow (GPM)
Flow (GPM)
TORQUE
SPEED
(LB IN)
(RPM)
676
466
Performance data is typical. Actual
data may vary slightly from one
production motor to another.
PSLGC.PM6, dg, ki
Hydraulics
994
12
S
E
R
I
E
S
Catalog 1510-20
Performance Data
T
A
Code 0100
Code 0130
100 cc / rev
130 cc / rev
PRESSURE (BAR)
17.2 34.5 51.7 69.0 86.2 103.4 120.7
S
E
R
I
E
S
PRESSURE (BAR)
17.2 34.5 51.7 69.0 86.2 103.4 120.7
1.9
1.9
3.8
3.8
7.6
7.6
11.4
11.4
15.1
15.1
18.9
18.9
26.5
26.5
34.1
34.1
45.4
45.4
56.8
Flow (LPM)
Flow (LPM)
TORQUE
SPEED
(nm)
(RPM)
6.0 cu in / rev
106.7
430
8.0 cu in / rev
PRESSURE (PSI)
250
500
.5
152
14
319
8
485
3
160
34
333
27
505
22
675
17
168
72
349
65
531
60
160
111
343
104
146
150
PRESSURE (PSI)
250
500
.5
214
12
454
9
694
7
935 1172
5
2
843 1005
12
7
223
27
468
24
712
22
708
56
231
56
479
53
729
51
525
99
705
94
223
85
472
82
722
80
335
143
523
138
707
133
206
114
460
111
712
109
136
189
326
182
514
176
701
172
189
143
444
140
697
138
111
266
300
259
487
254
675
249
157
201
409
198
658
195
72
344
259
337
447
331
637
327
101
259
353
255
603
253
12
14
460
202
453
388
448
578
443
763
438
12
23
346
262
342
504
340
753
337
185
429
430
426
675
423
944 1123
430 417
Flow (GPM)
15
Flow (GPM)
TORQUE
SPEED
(LB IN)
(RPM)
944
430
PSLGC.PM6, dg, ki
Hydraulics
Catalog 1510-20
Performance Data
Code 0165
T
A
Code 0195
165 cc / rev
195 cc / rev
PRESSURE (BAR)
PRESSURE (BAR)
17.2 34.5 51.7 69.0 86.2 103.4 120.7
1.9
1.9
3.8
3.8
7.6
7.6
11.4
11.4
15.1
15.1
18.9
18.9
26.5
26.5
34.1
34.1
45.4
45.4
56.8
56.8
Flow (LPM)
Flow (LPM)
TORQUE
SPEED
(nm)
(RPM)
159.9
338
10.0 cu in / rev
250
500
PRESSURE (PSI)
750 1000 1250 1500 1750
.5
269
10
562
8
286
21
588
19
297
45
12.0 cu in / rev
PRESSURE (PSI)
750 1000 1250 1500 1750
250
500
.5
323
8
334
18
609
43
340
37
287
68
599
66
330
57
262
91
583
89
305
76
241
115
561
113
282
95
196
161
507
159
233
134
602
132
129
208
437
206
154
173
521
171
12
16
278
314
276
616
274
12
35
231
384
229
216
346
520
343
15
272
287
621
286
15
Flow (GPM)
Flow (GPM)
TORQUE
SPEED
(LB IN)
(RPM)
1415
338
PSLGC.PM6, dg, ki
Hydraulics
S
E
R
I
E
S
Catalog 1510-20
Performance Data
T
A
Code 0230
Code 0260
230 cc / rev
260 cc / rev
PRESSURE (BAR)
17.2 34.5 51.7 75.9 89.7 106.9
S
E
R
I
E
S
PRESSURE (BAR)
17.2 34.5 51.7 65.5 82.8 96.6
1.9
1.9
3.8
3.8
7.6
7.6
11.4
11.4
15.1
15.1
18.9
18.9
26.5
26.5
34.1
34.1
45.4
45.4
56.8
56.8
Flow (LPM)
Flow (LPM)
TORQUE
SPEED
(nm)
(RPM)
37.6
246
250
500
.5
463
6
480
13
420
31
484
28
408
48
471
42
379
64
438
57
351
81
403
72
289
114
331
101
205
148
216
130
12
55
198
456
196
12
59
174
511
173
333
246
15
354
217
250
500
.5
402
6
835 1269
4
3
416
14
15
750
Flow (GPM)
Flow (GPM)
TORQUE
SPEED
(LB IN)
(RPM)
333
246
PSLGC.PM6, dg, ki
10
Hydraulics
Catalog 1510-20
Performance Data
Code 0295
Code 0330
295 cc / rev
330 cc / rev
PRESSURE (BAR)
17.2 34.5 58.6 69.0 86.2
1.9
3.8
7.6
11.4
15.1
18.9
26.5
34.1
45.4
56.8
PRESSURE (BAR)
17.2 34.5 51.7 75.9
Flow (LPM)
TORQUE
SPEED
(nm)
(RPM)
.5
3.8
7.6
11.4
15.1
18.9
26.5
34.1
45.4
56.8
20.0 cu in / rev
PRESSURE (PSI)
500 850 1000 1250
250
.5
436
63
354
89
237
115
12
68
154
15
1.9
Flow (LPM)
43.7
193
18.0 cu in / rev
250
387
193
PRESSURE (PSI)
500 750 1100
275
103
12
78
138
15
Flow (GPM)
TORQUE
SPEED
T
A
421
172
958 1696
172 172
Flow (GPM)
Performance data is typical. Actual
data may vary slightly from one
production motor to another.
PSLGC.PM6, dg, ki
11
Hydraulics
S
E
R
I
E
S
Catalog 1510-20
Performance Data
T
A
S
E
R
I
E
S
Code 0365
Code 0390
370 cc / rev
390 cc / rev
PRESSURE (BAR)
17.2 34.5 44.8 65.5
PRESSURE (BAR)
17.2 34.5 44.8 65.5
1.9
1.9
75.1 155.6
3
2
3.8
3.8
7.6
7.6
11.4
11.4
15.1
15.1
18.9
18.9
26.5
26.5
34.1
34.1
45.4
45.4
56.8
152
56.8
Flow (LPM)
Flow (LPM)
TORQUE
SPEED
(nm)
(RPM)
119.6
1059
22.6 cu in / rev
250
24.0 cu in / rev
PRESSURE (PSI)
PRESSURE (PSI)
500 650 950
250
500
650
950
.5
.5
314
91
12
80
122
12
15
152
15
Flow (GPM)
TORQUE
SPEED
(LB IN)
(RPM)
1059
152
665 1377
3
2
103
115
912 1633
143 144
Flow (GPM)
Performance data is typical. Actual
data may vary slightly from one
production motor to another.
PSLGC.PM6, dg, ki
12
Hydraulics
Catalog 1510-20
Dimensional Data
T
A
Dimensions
Inch equivalents for metric dimensions are shown in (**)
"L"
95.5
(3.76)
Max
Standard Rotation:
(As viewed from shaft end)
Front Ports - Pressurize "A"
to turn Clockwise, "B" to
turn Counterclockwise.
0045 0050 0065 0080 0100 0130 0160 0195 0230 0260 0295 0330 0365 0390
mm
(inches)
kg
Weight
(lb)
4 Bolt
mm
Length "L"
(inches)
kg
Weight
(lb)
Porting
SAE O-Ring & NPTF
Manifold
2x
31.75
(1.250)
32.26
(1.270)
32.26
(1.270)
2x
22.86
(.900)
63.50
(2.500)
A
45.72
(1.800)
B
22.86
(.900)
45.72
(1.800)
4x
5/16-18 UNC-28
x 12.7 (.50) Min Full thd
28.58
(1.125)
2x
14.28
(.562)
48.26
(1.900)
13
Hydraulics
S
E
R
I
E
S
Catalog 1510-20
Dimensional Data
T
A
S
E
R
I
E
S
Mounting
Shaft
44.70 (1.760)
19.00 (.748)
Key 1/4 x 1 Woodruff
14.2 (.56)
27.97 (1.101)
48.26
(1.900)
2.54 (.100)
25.40 (1.000)
1/4-20 UNC thd
x 15.75 (.62) Min Deep
82.52
(3.249)
1" Key
SAE A 2 Bolt
48.26 (1.900)
1" 6B Spline
45
2.54 (.100)
44.42 (1.749)
44.70 (1.760)
4 Bolt
30.7 (1.21)
25.40 (1.000)
9.70 (.382)
Thru
14
Hydraulics
Catalog 1510-20
Ordering Information
TA
XXXX
Series
Displacement
Mounting
Code
A
F
XX
Porting
Code Displacement
2.7
3.0
4.0
5.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
20.0
22.6
24.0
cu
cu
cu
cu
cu
cu
cu
cu
cu
cu
cu
cu
cu
cu
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
Options
Standard
Shaft
09
10
11
P
M
S
Rotation
XXXX
Code Rotation
Code
0045
0050
0065
0080
0100
0130
0165
0195
0230
0260
0295
0330
0365
0390
Shaft
Mounting
Code
Porting
1/2"-14 NPTF
Manifold
7/8"-14 SAE O-Ring
Code
AAAA
AAAB
AAAC
AAAG
AAAH
AABJ*
AABK*
AAFC
AAHD
HAAA**
HAAB**
HAAC**
Options
Black Paint
No Paint
Double Paint
Viton Seals, Black Paint
Viton Seals, No Paint
Free Running Rotorset, Black Paint
Free Running Rotorset, No Paint
White Epoxy Paint
White Epoxy Paint, Viton Seals
External Relief Valve (1894-1), Black Paint
External Relief Valve (1894-1), No Paint
External Relief Valve (1894-1), No Paint, Viton Seals
**
PSLGC.PM6, dg, ki
15
Hydraulics
T
A
S
E
R
I
E
S
Catalog 1510-20
Technical Information
T
B
S
E
R
I
E
S
Options
Features
Roller Vane Power Element For High Volumetric Efficiency and Long Life
TB Specifications
Code
Displacement
0045 0050
cc/rev
(cu in/rev)
bar
(psid)
Maximum Intermittent
bar
(psid)
45
(2.7)
49
(3.0)
65
(4.0)
82
(5.0)
99
(6.0)
130
(8.0)
163
(9.9)
785
678
511
409
454
343
274
124.1
(1800)
165.5
(2400)
195
228
260
(11.9) (13.9) (15.9)
230
197
172
0390
293
328
370
(17.9) (20.0) (22.6)
392
(24.0)
153
137
117
114
64.3
(569)
78.3 106.9 134.8 159.4 220.4 273.2 340.2 316.0 349.8 383.1 413.2 440.3 428.4
(693) (946) (1193) (1411) (1951) (2418) (3011) (2797) (3096) (3391) (3657) (3897) (3792)
88.0
(779)
106.9 145.1 183.5 216.6 297.4 345.9 399.6 427.3 465.1 498.8 509.0 540.4 524.5
(946) (1284) (1624) (1917) (2632) (3062) (3537) (3782) (4117) (4415) (4505) (4783) (4642)
PSLGC.PM6, dg, ki
16
Hydraulics
Catalog 1510-20
Technical Information
Performance Data
Continuous / Intermittent* Operation
Continuous
680
(1500)
Intermittent*
0
-50.8
(-2)
-25.4
(-1)
0
(0)
25.4
(1)
50.8
(2)
76.2
(3)
101.6
(4)
0 2 4 6 8 10 12
Life In Millions Of Revolutions
PSLGC.PM6, dg, ki
17
Hydraulics
T
B
S
E
R
I
E
S
Catalog 1510-20
Performance Data
Code 0045
Code 0050
45 cc / rev
50 cc / rev
PRESSURE (BAR)
34.5 69.0 103.4 124.1 137.9 165.5
T
B
S
E
R
I
E
S
PRESSURE (BAR)
34.5 69.0 103.4 124.1 137.9 165.5
1.9
13.1 29.7
31
17
1.9
16.3 36.0
26
13
3.8
3.8
7.6
7.6
11.4
11.4
15.1
15.1
18.9
18.9
26.5
26.5
34.1
34.1
Flow (LPM)
Flow (LPM)
TORQUE
SPEED
(nm)
(RPM)
62.7
722
.5
116
31
263
17
124
76
276
61
427
43
518
36
579
29
134
167
294
149
453
131
547
121
132
256
293
239
455
220
132
344
296
326
128
433
7
9
.5
144
26
319
13
706
18
154
65
338
50
518
35
625
28
697
21
840
9
609
113
731
97
163
141
360
127
555
110
671
102
746
94
896
80
553
210
617
200
746
183
161
218
358
203
557
186
675
177
753
169
907
153
465
307
567
295
635
285
769
268
160
295
361
279
567
261
691
251
774
243
937
227
294
414
465
393
569
380
639
370
779
352
155
371
358
355
566
337
693
326
777
317
946
301
117
609
284
589
458
566
564
551
635
540
779
520
143
525
346
507
558
487
686
474
772
466
946
448
107
785
275
764
449
739
555
722
627
710
770
689
133
678
336
658
546
638
675
623
761
614
936
595
Flow (GPM)
Flow (GPM)
TORQUE
SPEED
(LB IN)
(RPM)
555
722
Performance data is typical. Actual
data may vary slightly from one
production motor to another.
PSLGC.PM6, dg, ki
18
Hydraulics
Catalog 1510-20
Performance Data
Code 0065
Code 0080
65 cc / rev
80 cc / rev
PRESSURE (BAR)
34.5 69.0 103.4 124.1 137.9 165.5
PRESSURE (BAR)
34.5 69.0 103.4 124.1 137.9 165.5
1.9
1.9
3.8
3.8
7.6
7.6
11.4
11.4
15.1
15.1
18.9
18.9
26.5
26.5
34.1
34.1
Flow (LPM)
Flow (LPM)
TORQUE
SPEED
(nm)
(RPM)
116.9
470
.5
213
22
459
14
709
6
224
51
479
42
734
34
887
29
233
108
500
99
231
166
.5
256
17
562
10
877
4
989 1193
25
17
269
40
585
33
767
90
285
86
616
78
498
156
769
147
285
132
619
124
229
224
501
214
778
203
286
178
628
170
223
281
497
271
777
260
282
225
627
216
206
396
481
385
764
372
267
317
615
307
192
511
467
499
749
485
252
409
600
398
Flow (GPM)
Flow (GPM)
TORQUE
SPEED
(LB IN)
(RPM)
1035
470
Performance data is typical. Actual
data may vary slightly from one
production motor to another.
PSLGC.PM6, dg, ki
19
Hydraulics
T
B
S
E
R
I
E
S
Catalog 1510-20
Performance Data
Code 0100
Code 0130
100 cc / rev
130 cc / rev
PRESSURE (BAR)
34.5 69.0 103.4 124.1 137.9 165.5
T
B
S
E
R
I
E
S
PRESSURE (BAR)
34.5 69.0 103.4 124.1 137.9 165.5
1.9
1.9
3.8
3.8
7.6
7.6
11.4
11.4
15.1
15.1
18.9
18.9
26.5
26.5
34.1
34.1
45.4
45.4
56.8
Flow (LPM)
TORQUE
SPEED
(nm)
(RPM)
171.5
426
Flow (LPM)
.5
310
16
330
35
.5
446
12
465
27
346
73
345
111
347
149
343
187
327
264
301
340
414
257
12
257
454
12
335
343
15
253
430
Flow (GPM)
TORQUE
SPEED
(LB IN)
(RPM)
1518
426
Flow (GPM)
20
Hydraulics
Catalog 1510-20
Performance Data
Code 0165
Code 0195
165 cc / rev
195 cc / rev
PRESSURE (BAR)
34.5 69.0 103.4 124.1 155.2
PRESSURE (BAR)
34.5 69.0 103.4 124.1 144.8
1.9
1.9
3.8
3.8
7.6
7.6
11.4
11.4
15.1
15.1
18.9
18.9
26.5
26.5
34.1
34.1
45.4
45.4
56.8
56.8
Flow (LPM)
Flow (LPM)
TORQUE
SPEED
(nm)
(RPM)
248.2
325
11.9 cu in / rev
PRESSURE (PSI)
500 1000 1500 1800 2100
.5
.5
12
12
15
15
Flow (GPM)
Flow (GPM)
TORQUE
SPEED
(LB IN)
(RPM)
1759
330
PSLGC.PM6, dg, ki
21
Hydraulics
T
B
S
E
R
I
E
S
Catalog 1510-20
Performance Data
Code 0230
Code 0260
Code 0295
230 cc / rev
260 cc / rev
295 cc / rev
PRESSURE (BAR)
T
B
S
E
R
I
E
S
PRESSURE (BAR)
PRESSURE (BAR)
1.9
1.9
3.8
7.6
11.4
15.1
18.9
26.5
34.1
34.1
45.4
45.4
45.4
56.8
56.8
56.8
Flow (LPM)
Flow (LPM)
TORQUE
SPEED
(nm)
(RPM)
1.9
Flow (LPM)
277.6
239
15.9 cu in / rev
13.9 cu in / rev
PRESSURE (PSI)
17.9 cu in / rev
PRESSURE (PSI)
PRESSURE (PSI)
500 1000 1450 1900
.5
.5
.5
12
12
12
15
15
15
Flow (GPM)
TORQUE
SPEED
(LB IN)
(RPM)
2457
239
Flow (GPM)
Flow (GPM)
PSLGC.PM6, dg, ki
22
Hydraulics
Catalog 1510-20
Performance Data
Code 0330
Code 0365
Code 0390
330 cc / rev
370 cc / rev
390 cc / rev
PRESSURE (BAR)
34.5 69.0 93.1 113.8
PRESSURE (BAR)
34.5 69.0 82.8 100.0
PRESSURE (BAR)
34.5 69.0 86.2 105.2
56.8
56.8
11
10
22
21
34
32
45
43
56
55
79
102
77
100
20
31
42
53
75
97
18
29
40
51
73
Flow (LPM)
Flow (LPM)
TORQUE
SPEED
(nm)
(RPM)
56.8
Flow (LPM)
354.3
165
20.0 cuPRESSURE
in / rev
(PSI)
22.6 cu
in / rev
PRESSURE (PSI)
24.0 cuPRESSURE
in / rev
(PSI)
.5
.5
.5
12
12
12
15
15
15
Flow (GPM)
Flow (GPM)
TORQUE
SPEED
(LB IN)
(RPM)
3136
165
Flow (GPM)
PSLGC.PM6, dg, ki
23
Hydraulics
T
B
S
E
R
I
E
S
Catalog 1510-20
Dimensional Data
Dimensions
Inch equivalents for metric dimensions are shown in (**)
"L"
Standard Rotation:
(As viewed from shaft end)
Front Ports - Pressurize "A" to
turn Clockwise, "B" to turn
Counterclockwise.
Rear Ports - Pressurize "A" to
turn Counterclockwise, "B" to
turn Clockwise.
95.5
(3.76)
Max.
0045 0050 0065 0080 0100 0130 0165 0195 0230 0260 0295 0330 0365 0390
T
B
mm
Length "L"
(inches)
kg
Weight
(lb)
136 138
141 144 147 154 160 166 173
179
185 192
200 205
(5.36) (5.42) (5.54) (5.67) (5.79) (6.04) (6.29)(6.54) (6.79) (7.04) (7.29)(7.54) (7.88) (8.04)
6.03 6.12 6.26 6.35 6.49 6.76 7.03 7.35 7.58 7.80 8.07 8.35 8.66 8.80
(13.3) (13.5) (13.8) (14.0) (14.3) (14.9) (15.5)(16.2) (16.7) (17.2) (17.8)(18.4) (19.1) (19.4)
4 Bolt
S
E
R
I
E
S
mm
Length "L"
(inches)
kg
Weight
(lb)
136 138
141 144 147 154 160 166 173
179
185 192
200 205
(5.36) (5.42) (5.54) (5.67) (5.79) (6.04) (6.29)(6.54) (6.79) (7.04) (7.29)(7.54) (7.88) (8.05)
5.62 5.67 5.80 5.94 6.08 6.31 6.62 7.03 7.17 7.39 7.62 7.94 8.26 8.39
(12.4) (12.5) (12.8) (13.1) (13.4) (13.9) (14.6)(15.5) (15.8) (16.3) (16.8)(17.5) (18.2) (18.5)
Magneto Mount
Length "L"
mm
(inches)
kg
Weight
(lb)
136 138
141 144 147 154 160 166 173
179
185 192
(5.36) (5.42) (5.54) (5.67) (5.79) (6.04) (6.29)(6.54) (6.79) (7.04) (7.29) 7.54
200 205
7.88 8.05
6.30 6.40 6.53 6.62 6.76 7.03 7.30 7.62 7.85 8.12 8.35 8.62 8.94 9.07
(13.9) (14.1) (14.4) (14.6) (14.9) (15.5) (16.1)(16.8) (17.3) (17.9) (18.4)(19.0) (19.7) (20.0)
Mounting
SAE A 2 Bolt
Magneto
14.2 (.56)
2.54 (.100)
14.2 (.56)
45
22 30'
2.54 (.100)
82.52 (3.249)
82.52 (3.249)
4 x 13.494 (17/32)
Thru on a 106.38 (4.188) BC
PSLGC.PM6, dg, ki
24
Hydraulics
Catalog 1510-20
Dimensional Data
Mounting
48.26 (1.900)
45
2.54 (.100)
4 Bolt
44.42 (1.749)
14.2 (.56)
Porting
2.54 (.100)
48.26 (1.900)
2 x 13.494 (17/32) Thru
on a 106.38 (4.188) BC
48.26 (1.900)
45.72 (1.800)
2 x 22.86
(.900)
14.2 (.56)
2.54 (.100)
48.26 (1.900)
48.26 (1.900)
63.50 (2.500)
82.52 (3.249)
Manifold
4 x 5/16-18 UNC-2B
x 12.7 (.50) Min Full thd
2x
31.75 (1.250)
28.58 (1.125)
2 x 14.28 (.562)
2x
22.86 (.900)
45.72 (1.800)
L + 20.3 (.80)
16.26 (.640)
A
B
31.06 (1.223)
PSLGC.PM6, dg, ki
25
Hydraulics
T
B
S
E
R
I
E
S
Catalog 1510-20
Dimensional Data
Shaft
Inch equivalents for metric dimensions are shown in (**)
49.02 (1.93)
44.70 (1.760)
19.00 (.748)
M8 x 1.25-6H thd
x .75 Min Deep
27.86 (1.097)
To Top of Key
27.97 (1.101)
25.001 (.9843)
25.000 (.9995)
1/4-20 UNC thd
x 15.75 (.62) Min Deep
Key A8 x 7 x 23mm
1" Key
25mm Keyed
T
B
S
E
R
I
E
S
49.3 (1.94)
4.32 (.170)
1.24 (.049)
19.00 (.748)
23.52 27.97
(.926) (1.101)
61.2 (2.41)
4.06
(.16)
25.40 (1.000)
25.65 (1.010) x 1/4 Key
25.65 (1.010)
x 6.363 (.2505)
3/4-16 UNF thd
Torque Nut To 300-237 Nm
(225-175 ft lbs)
34.5 (1.36)
1" Tapered
23.52 (.926)
1" 6B Spline
44.7 (1.76)
30.7 (1.21)
41.4 (1.63)
18.03 (.710)
26
Hydraulics
Catalog 1510-20
Ordering Information
TB
XXXX
XX
Series
Displacement
Mounting
Porting
Shaft
Code
Mounting
Code
A
F
M
0
1
Code
09
10
11
13
21
25
26
28
Code Displacement
0045
0050
0065
0080
0100
0130
0165
0195
0230
0260
0295
0330
0365
0390
2.7
3.0
4.0
5.0
6.0
8.0
9.9
11.9
13.9
15.9
17.9
20.0
22.6
24.0
cu
cu
cu
cu
cu
cu
cu
cu
cu
cu
cu
cu
cu
cu
Code
M
P*
R
S
T**
*
**
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
Manifold
1/2"-14 NPTF
Rear; 3/4-16 SAE O-Ring
7/8"-14 SAE O-Ring
1/2" BSPF
XXXX
Rotation
Options
Rotation
Standard
Reverse Timed Manifold
Shaft
T
B
Code
Porting
AAAA
AAAB
AAAC
AAAF
AABP
AAAG
AAAH
AAAJ
AAFG
AABJ*
AABK*
AABL*
AABM*
AAFC
AAHD
AAJV
HAAA**
HAAB**
HAAC**
S
E
R
I
E
S
Options
Black Paint
No Paint
Double Paint
Castle Nut, Black Paint
Castle Nut, No Paint
Viton Seals, Black Paint
Viton Seals, No Paint
Vespel Commutator Seal, Black Paint
Vespel Commutator Seal, No Paint
Free Running Rotorset, Black Paint
Free Running Rotorset, No Paint
Free Running Rotorset, No Commutator Seal, Black Paint
Free Running Rotorset, No Commutator Seal, No Paint
White Epoxy Paint
White Epoxy Paint, Viton Seals
Bidirectional Shuttle (3:30), Black Paint
External Relief Valve (1894-1), Black Paint
External Relief Valve (1894-1), No Paint
External Relief Valve (1894-1), No Paint, Viton Seals
**
PSLGC.PM6, dg, ki
27
Hydraulics
Catalog 1510-20
Technical Information
Options
Features
Roller Vane Power Element For High Volumetric Efficiency and Long Life
Wheel Mount
Speed Sensor
T
D
Corrosion Resistance
S
E
R
I
E
S
Code
TD Specifications
Displacement
45
(2.7)
50
(3.0)
66
(4.0)
82
(5.0)
98
(6.0)
805
640
654
546
456
344
274
230
0390
228
261
293
326
370
392
(13.9) (15.9) (17.9) (20.0) (22.6) (24.0)
247
215
192
171
146
143
bar
(psid)
137.9 137.9 137.9 137.9 137.9 137.9 137.9 137.9 120.7 113.8 106.9 100.0 91.4
86.2
(2000) (2000) (2000) (2000) (2000) (2000) (2000) (2000) (1750) (1650) (1550) (1450) (1325) (1250)
bar
(psid)
172.4 172.4 172.4 172.4 172.4 172.4 172.4 172.4 148.3 137.9 127.6 117.2 108.6 103.4
(2500) (2500) (2500) (2500) (2500) (2500) (2500) (2500) (2150) (2000) (1850) (1700) (1575) (1500)
70.5
(624)
88.7 122.0 153.5 183.5 248.7 308.7 379.6 370.2 402.3 427.5 443.6 467.6 444.6
(785) (1080) (1359) (1624) (2201) (2732) (3360) (3277) (3561) (3784) (3926) (4139) (3935)
90.0
(797)
112.8 154.2 194.1 231.9 313.6 389.4 476.9 461.0 492.9 515.6 523.2 558.6 538.7
(998) (1365) (1718) (2053) (2776) (3447) (4221) (4080) (4363) (4564) (4631) (4944) (4768)
PSLGC.PM6, dg, ki
28
Hydraulics
Catalog 1510-20
Technical Information
Maximum Side Load Capacity
Flange Mount
3
Multiply
Allowable
Radial Load 2
By These
Factors
1
1021
(2250)
0
0 2 4 6 8 10 12
Life In Millions Of Revolutions
680
(1500)
Performance Data
Continuous / Intermittent* Operation
340
(750)
Continuous
Intermittent*
0
-50.8
(-2)
-25.4
0
25.4
50.8
76.2
(-1)
(0)
(1)
(2)
(3)
Distance From Mounting Face - mm (in)
101.6
(4)
Wheel Mount
Shaft Side Load - kg (lbs)
1361
(3000)
1021
(2250)
T
D
680
(1500)
S
E
R
I
E
S
340
(750)
0
0
(0)
25.4
(1)
50.8
(2)
76.2
(3)
101.6
(4)
127.0
(5)
29
Hydraulics
Catalog 1510-20
Performance Data
Code 0045
Code 0050
Code 0065
50 cc / rev
PRESSURE (BAR)
34.5 69.0 103.4 137.9 172.4
1.9
1.9
1.9
3.8
3.8
3.8
7.6
7.6
7.6
11.4
11.4
11.4
15.1
15.1
15.1
18.9
18.9
18.9
26.5
26.5
26.5
34.1
34.1
34.1
45.4
45.4
56.8
Flow (LPM)
TORQUE
SPEED
(nm)
(RPM)
68.4
761
2.7 cu in / rev
Flow (LPM)
Flow (LPM)
3.0 cu in / rev
PRESSURE (PSI)
500 1000 1500 2000 2500
T
D
S
E
R
I
E
S
PRESSURE (PSI)
500 1000 1500 2000 2500
.5
121
41
272
35
425
28
579
22
735
14
.5
146
32
327
23
516
13
705
6
126
86
282
79
440
72
599
65
757
56
159
69
345
60
537
50
727
41
128
176
288
168
452
161
619
152
788
141
170
146
364
136
563
124
126
266
287
257
453
249
620
239
789
227
167
225
363
214
123
356
285
346
454
337
624
326
796
313
169
294
119
446
281
435
451
425
624
413
797
398
105
625
270
613
440
601
615
587
793
570
94
805
259
791
430
777
605
761
784
742
Flow (GPM)
TORQUE
SPEED
(LB IN)
(RPM)
605
761
4.0 cu in /PRESSURE
rev
(PSI)
500 1000 1500 2000 2500
.5
220
24
481
17
743 1004
11
3
914
25
232
52
498
45
764
113
961
94
239
109
512
102
565
203
768
191
969
172
238
167
512
159
367
282
574
271
784
260
993
241
237
224
514
215
165
363
365
349
574
339
785
327
998
307
233
279
511
271
156
501
357
485
568
474
782
460
997
440
216
386
497
376
141
640
342
621
555
609
771
594
988
572
195
494
477
483
12
114
835
317
813
531
802
748
786
966
766
12
152
654
435
641
15
102
802
388
789
776
676
Flow (GPM)
969 1265
763 748
Flow (GPM)
Performance data is typical. Actual
data may vary slightly from one
production motor to another.
PSLGC.PM6, dg, ki
30
Hydraulics
Catalog 1510-20
Performance Data
Code 0080
Code 0100
80 cc / rev
100 cc / rev
PRESSURE (BAR)
34.5 69.0 103.4 137.9 172.4
PRESSURE (BAR)
34.5 69.0 103.4 137.9 172.4
1.9
29.5 65.0
17
8
1.9
35.6 77.6
14
7
3.8
3.8
7.6
7.6
11.4
11.4
15.1
15.1
18.9
18.9
26.5
26.5
34.1
34.1
45.4
45.4
56.8
56.8
Flow (LPM)
TORQUE
SPEED
Flow (LPM)
(nm)
(RPM)
138.5
638
5.0 cu in / rev
6.0 cu in / rev
PRESSURE (PSI)
500 1000 1500 2000 2500
.5
261
17
575
8
276
39
596
30
290
85
PRESSURE (PSI)
500 1000 1500 2000 2500
.5
315
14
687
7
332
33
631
76
348
71
291
131
633
122
350
109
293
177
642
167
353
147
290
223
641
213
349
186
273
316
628
304
330
263
249
408
603
396
302
340
12
197
546
551
533
12
243
456
15
136
686
494
670
15
176
572
Flow (GPM)
Flow (GPM)
TORQUE
SPEED
(LB IN)
(RPM)
1226
638
PSLGC.PM6, dg, ki
31
Hydraulics
T
D
S
E
R
I
E
S
Catalog 1510-20
Performance Data
Code 0130
Code 0165
1.9
1.9
3.8
3.8
7.6
7.6
11.4
11.4
15.1
15.1
18.9
18.9
26.5
26.5
34.1
34.1
45.4
45.4
56.8
56.8
Flow (LPM)
TORQUE
SPEED
Flow (LPM)
(nm)
(RPM)
225.5
407
8.0 cu in / rev
10.0 cu inPRESSURE
/ rev
(PSI)
PRESSURE (PSI)
500 1000 1500 2000 2500
T
D
S
E
R
I
E
S
.5
445
12
464
27
414
257
12
338
344
12
15
252
431
15
.5
Flow (GPM)
Flow (GPM)
TORQUE
SPEED
(LB IN)
(RPM)
1996
407
PSLGC.PM6, dg, ki
32
Hydraulics
Catalog 1510-20
Performance Data
Code 0195
Code 0230
230 cc / rev
PRESSURE (BAR)
34.5 69.0 103.4 120.7 137.9 148.3
1.9
1.9
3.8
3.8
7.6
7.6
11.4
11.4
15.1
15.1
18.9
18.9
26.5
26.5
34.1
34.1
45.4
45.4
56.8
56.8
75.7
Flow (LPM)
TORQUE
SPEED
(nm)
(RPM)
Flow (LPM)
342.0
272
11.9 cu in PRESSURE
/ rev
(PSI)
.5
12
12
15
15
20
.5
Flow (GPM)
TORQUE
SPEED
(LB IN)
(RPM)
3027
272
Flow (GPM)
PSLGC.PM6, dg, ki
33
Hydraulics
T
D
S
E
R
I
E
S
Catalog 1510-20
Performance Data
Code 0260
Code 0295
1.9
1.9
34.1
45.4
45.4
56.8
56.8
75.7
75.7
Flow (LPM)
Flow (LPM)
TORQUE
SPEED
(nm)
(RPM)
313.3
277
15.9 cu inPRESSURE
/ rev
(PSI)
17.9 cu inPRESSURE
/ rev
(PSI)
T
D
S
E
R
I
E
S
.5
.5
12
12
15
15
20
20
Flow (GPM)
Flow (GPM)
TORQUE
SPEED
(LB IN)
(RPM)
2773
277
PSLGC.PM6, dg, ki
34
Hydraulics
Catalog 1510-20
Performance Data
Code 0330
Code 0365
Code 0390
330 cc /PRESSURE
rev
(BAR)
370 cc PRESSURE
/ rev
(BAR)
390 cc / rev
PRESSURE (BAR)
34.5 69.0 86.2 103.4
1.9
3.8
7.6
11.4
15.1
30.3
26.5
34.1
45.4
45.4
56.8
56.8
56.8
75.7
75.7
75.7
Flow (LPM)
Flow (LPM)
TORQUE
SPEED
(nm)
(RPM)
Flow (LPM)
324.8
222
19.9 cu in / rev
22.6 cu in / rev
24.0 cu in / rev
PRESSURE (PSI)
500 1000 1325 1575
PRESSURE (PSI)
500 1000 1450 1700
PRESSURE (PSI)
500 1000 1250 1500
.5
.5
.5
12
12
12
15
15
15
20
20
20
Flow (GPM)
TORQUE
SPEED
(LB IN)
(RPM)
2875
222
Flow (GPM)
Flow (GPM)
PSLGC.PM6, dg, ki
35
Hydraulics
T
D
S
E
R
I
E
S
Catalog 1510-20
Dimensional Data
Dimensions
Inch equivalents for metric dimensions are shown in (**)
"L"
"L"
95.5
(3.76)
Max.
95.5
(3.76)
Max.
Flange Mount
Wheel Mount
Standard Rotation:
(As viewed from shaft end)
Front Ports - Pressurize "A" to turn Clockwise, "B" to turn Counterclockwise.
Rear Ports - Pressurize "A" to turn Counterclockwise, "B" to turn Clockwise.
0045 0050 0065 0080 0100 0130 0165 0195 0230 0260 0295 0330 0365 0390
mm
(inches)
kg
Weight
T
D
(lb)
6.09 6.17 6.30 6.44 6.51 6.82 7.08 7.37 7.56 7.86 8.02 8.34 8.71 8.84
(13.4) (13.6) (13.9) (14.2) (14.4) (15.0) (15.6) (16.2) (16.7) (17.3) (17.7) (18.4) (19.2) (19.5)
4 Bolt
mm
Length "L"
(inches)
kg
Weight
S
E
R
I
E
S
136 138
141
144 147
154
160 166 173 179 185 195 200 205
(5.36) (5.42) (5.54) (5.67) (5.79) (6.04) (6.29) (6.54) (6.79) (7.04) (7.29) (7.54) (7.88) (8.04)
(lb)
136 138
141
144 147
154
160 166 173 179 185 195 200 205
(5.36) (5.42) (5.54) (5.67) (5.79) (6.04) (6.29) (6.54) (6.79) (7.04) (7.29) (7.54) (7.88) (8.05)
5.66 5.74 5.88 6.01 6.08 6.40 6.65 6.94 7.14 7.43 7.60 7.92 8.30 8.42
(12.5) (12.7) (13.0) (13.3) (13.4) (14.1) (14.7) (15.3) (15.7) (16.4) (16.7) (17.5) (18.3) (18.6)
Magneto Mount
Length "L"
mm
(inches)
kg
Weight
(lb)
136 138
141
144 147
154
160 166 173 179 185 195 200 205
(5.36) (5.42) (5.55) (5.67) (5.80) (6.05) (6.30) (6.55) (6.80) (7.05) (7.30) (7.55) (7.88) (8.05)
6.35 6.44 6.58 6.71 6.80 7.08 7.35 7.62 7.85 8.12 8.30 8.62 8.98 9.12
(14.0) (14.2) (14.5) (14.8) (15.0) (15.6) (16.2) (16.8) (17.3) (17.9) (18.3) (19.0) (19.8) (20.1)
Wheel Mount
Length "L"
mm
(inches)
Weight
kg
(lb)
107 109
112
115 118
124
131 137 143 150 156 162 171 175
(4.21) (4.27) (4.39) (4.52) (4.64) (4.89) (5.14) (5.39) (5.64) (5.89) (6.14) (6.39) (6.73) (6.89)
6.80 6.87 7.01 7.14 7.22 7.53 7.79 8.07 8.27 8.57 8.73 9.05 9.43 9.55
(15.0) (15.2) (15.5) (15.8) (15.9) (16.6) (17.2) (17.8) (18.2) (18.9) (19.2) (20.0) (20.8) (21.1)
PSLGC.PM6, dg, ki
36
Hydraulics
Catalog 1510-20
Dimensional Data
Mounting
Inch equivalents for metric dimensions are shown in (**)
14.2 (.56)
2.54 (.100)
82.52 (3.249)
SAE A 2 Bolt
14.2 (.56)
2.54 (.100)
45
22 30'
82.52 (3.249)
Magneto
4 x 13.494 (17/32)
Thru on a 106.38 (4.188) BC
45
2.54 (.100)
T
D
44.42 (1.749)
4 Bolt
36.83 (1.450)
19.05 (.750)
Wheel Mount
25.4 (1.00)
49.20 (1.937)
45.72 (1.800)
22.86 (.900)
60.30 (2.374)
PSLGC.PM6, dg, ki
37
Hydraulics
45
S
E
R
I
E
S
Catalog 1510-20
Dimensional Data
Porting
Inch equivalents for metric dimensions are shown in (**)
48.26 (1.900)
48.26 (1.900)
45.72 (1.800)
48.26 (1.900)
48.26 (1.900)
63.50 (2.500)
4 x 5/16-18 UNC-2B
x 12.7 (.50) Min
Full thd
Manifold
T
D
S
E
R
I
E
S
2x
31.75 (1.250)
28.58 (1.125)
2 x 14.28 (.562)
2x
22.86 (.900)
45.72 (1.800)
L + 20.3 (.80)
16.26 (.640)
A
B
3/4-16 UNF O-Ring
24.41 (.961)
31.06 (1.223)
PSLGC.PM6, dg, ki
38
Hydraulics
Catalog 1510-20
Dimensional Data
Shaft
Inch equivalents for metric dimensions are shown in (**)
49.02 (1.93)
44.70 (1.760)
19.00 (.748)
M8 x 1.25-6H thd
x .75 Min Deep
27.86 (1.097)
To Top of Key
27.97 (1.101)
25.001 (.9843)
25.000 (.9995)
1/4-20 UNC thd
x 15.75 (.62) Min Deep
Key A8 x 7 x 23mm
1" Key
25mm Keyed
49.3 (1.94)
4.32 (.170)
1.24 (.049)
19.00 (.748)
23.52 27.97
(.926) (1.101)
61.2 (2.41)
4.06
(.16)
25.40 (1.000)
25.65 (1.010) x 1/4 Key
25.65 (1.010)
x 6.363 (.2505)
3/4-16 UNF thd
Torque Nut To 300-237 Nm
(225-175 ft lbs)
34.5 (1.36)
1" Tapered
23.52 (.926)
1" 6B Spline
44.7 (1.76)
30.7 (1.21)
41.4 (1.63)
18.03 (.710)
PSLGC.PM6, dg, ki
39
Hydraulics
T
D
S
E
R
I
E
S
Catalog 1510-20
Ordering Information
TD
XXXX
XX
XXXX
Series
Displacement
Mounting
Porting
Shaft
Rotation
Options
Code Displacement
Code
0045
0050
0065
0080
0100
0130
0165
0195
0230
0260
0295
0330
0365
0390
M***
P*
R
S
T**
2.7
3.0
4.0
5.0
6.0
8.0
10.0
11.9
13.9
15.9
17.9
19.9
22.6
24.0
cu
cu
cu
cu
cu
cu
cu
cu
cu
cu
cu
cu
cu
cu
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
Code
T
D
A
F
M
N
U
Porting
Code
Manifold
1/2"-14 NPTF
Rear; 3/4-16 SAE O-Ring
7/8"-14 SAE O-Ring
1/2" BSPF
0
1
Rotation
Standard
Reverse Timed Manifold
*
Available on A & F mounting only
** Available on A & M mounting only
*** Available on A, F & M mounting only
Code
09
10
11
13
21
25
26
28
Mounting
SAE "A" 2 Bolt
4 Bolt
Magneto
Midmount
Wheel
S
E
R
I
E
S
Code
AAAA
AAAB
AAAC
AAAF
AABP
AAAG
AAAH
AAAJ
AAFG
AABJ*
AABK*
AABL*
AABM*
AAFC
AAHD
AAJV
FFAB
FFAA
HAAA**
HAAB**
HAAC**
Shaft
1" Straight w/0.38" Crosshole
1" Keyed
1" 6B Spline
Long 1" Keyed
1" Keyed; Corrosion Resistant
1" Tapered
25mm Keyed w/ 8mm Key
7/8" 13 Tooth Spline
Options
Black Paint
No Paint
Double Paint
Castle Nut, Black Paint
Castle Nut, No Paint
Viton Seals, Black Paint
Viton Seals, No Paint
Vespel Commutator Seal, Black Paint
Vespel Commutator Seal, No Paint
Free Running Rotorset, Black Paint
Free Running Rotorset, No Paint
Free Running Rotorset, No Commutator Seal, Black Paint
Free Running Rotorset, No Commutator Seal, No Paint
White Epoxy Paint
White Epoxy Paint, Viton Seals
Bidirectional Shuttle (3:30), Black Paint
Internal Speed Sensor, No Paint
Internal Speed Sensor, Black Paint
External Relief Valve (1894-1), Black Paint
External Relief Valve (1894-1), No Paint
External Relief Valve (1894-1), No Paint, Viton Seals
**
PSLGC.PM6, dg, ki
40
Hydraulics
Catalog 1510-20
Series
TF
TG
TH
81-477
(4.9-29.1)
140-958
(8.6-58.5)
140-958
(8.6-58.5)
206.8
(3000)
206.8
(3000)
206.8
(3000)
275.8
(4000)
275.8
(4000)
275.8
(4000)
680.9
(6027)
1142.1
(9239)
1142.1
(9239)
917.5
(8121)
1489.7
(12636)
1489.7
(12636)
Displacement
cc/rev
(cu in/rev)
76
(20)
76
(20)
76
(20)
95
(25)
114
(30)
114
(30)
Max Speed
RPM
749
660
660
3008
(6762)
3008
(6762)
3093
(6953)
PSLGC.PM6, dg, ki
41
Hydraulics
L
A
R
G
E
F
R
A
M
E
T
O
R
Q
L
I
N
K
Catalog 1510-20
Technical Information
T
F
S
E
R
I
E
S
Options
Features
Wheel Mount
Brake Motor
Clutch Motor
Speed Sensor
Corrosion Resistance
TF Specifications
Code
0100
81
(4.9)
100
(6.1)
128
(7.8)
141
(8.6)
169
(10.3)
197
(12.0)
238
(14.5)
280
(17.1)
364
(22.2)
405
(24.7)
477
(29.1)
553
562
436
397
332
285
315
267
204
185
156
bar
(psid)
206.9
(3000)
155.2
(2250)
137.9
(2000)
137.9
(2000)
137.9
(2000)
137.9
(2000)
137.9
(2000)
137.9
(2000)
127.6
(1400)
127.6
(1850)
113.4
(1645)
275.9
(4000)
241.4
(3500)
206.9
(3000)
206.9
(3000)
206.9
(3000)
206.9
(3000)
206.9
(3000)
206.9
(3000)
189.7
(2200)
172.4
(2500)
137.9
(2000)
221.4
(1957)
202.0
(1788)
236.6
(2094)
261.4
(2314)
328.9
(2911)
376.1
(3329)
456.0
(4036)
545.4
(4827)
658.8
(5831)
722.3
(6393)
767.1
(6790)
296.9
(2628)
319.2
(2825)
359.7
(3184)
396.6
(3510)
495.4
(4385)
568.7
(5034)
689.3
(6101)
820.9
(7266)
976.3
(8641)
1072.5
(8638)
933.0
(8258)
cc/rev
(cu in/rev)
0140
0080
Displacement
0130
0170
0195
0240
0280
0360
0405
0475
PSLGC.PM6, dg, ki
42
Hydraulics
Catalog 1510-20
Technical Information
Performance Data
Flange Mount
Side Load - kg (lbs)
3628.8
(8000)
2721.6
(6000)
Intermittent*
1814.4
(4000)
907.2
(2000)
Wheel Mount
Side Load - kg (lbs)
3628.8
(8000)
2721.6
(6000)
1814.4
(4000)
907.2
(2000)
0
0
T
F
3
Multiply
Allowable
Radial Load
2
By These
Factors
1
0
0 2 4 6 8 10 12
Life In Millions Of Revolutions
PSLGC.PM6, dg, ki
43
Hydraulics
S
E
R
I
E
S
Catalog 1510-20
Performance Data
T
F
Code 0080
Code 0100
80 cc / rev
100 cc / rev
PRESSURE (BAR)
34.5 69.0 103.4 137.9 155.2 172.4 206.9 241.4
PRESSURE (BAR)
34.5 69.0 103.4 137.9 172.4 206.9 241.4 275.9
S
E
R
I
E
S
1.9
1.9
3.8
3.8
7.6
7.6
11.4
11.4
15.1
15.1
18.9
18.9
26.5
26.5
34.1
34.1
45.4
45.4
56.8
56.8
75.7
Flow (LPM)
TORQUE
SPEED
4.9 cu in / rev
(nm)
(RPM)
178.4
633
Flow (LPM)
6.1 cu in / rev
PRESSURE (PSI)
500 1000 1500 2000 2250 2500 3000 3500
PRESSURE (PSI)
4000
.5
318
14
679 1041
9
4
2289
13
335
33
2543
6
2352
40
351
71
2602
34
601
128
2428
78
350
109
2671
64
284
182
610
174
2491
120
353
147
2716
98
282
228
612
219
2560
163
352
184
2762
133
274
321
607
311
2612
247
343
260
2810
202
262
414
597
402
2628
331
329
336
2824
272
12
239
553
574
540
2621
456
12
299
449
2825
377
15
215
693
546
677
2605
582
15
259
562
2813
480
20
186
749
2763
653
.5
256
19
546
14
835 1118
8
1
270
42
575
37
281
89
598
83
282
135
Flow (GPM)
TORQUE
SPEED
(LB IN)
(RPM)
1231
646
Flow (GPM)
Performance data is typical. Actual
data may vary slightly from one
production motor to another.
PSLGC.PM6, dg, ki
44
Hydraulics
Catalog 1510-20
Performance Data
Code 0130
Code 0140
130 cc / rev
140 cc / rev
PRESSURE (BAR)
34.5 69.0 103.4 137.9 172.4 206.9
PRESSURE (BAR)
34.5 69.0 103.4 137.9 172.4 206.9
1.9
1.9
3.8
3.8
7.6
7.6
11.4
11.4
15.1
15.1
18.9
18.9
26.5
26.5
34.1
34.1
45.4
45.4
56.8
56.8
75.7
75.7
Flow (LPM)
Flow (LPM)
TORQUE
SPEED
(nm)
(RPM)
345.6
522
8.6 cu in / rev
PRESSURE (PSI)
500 1000 1500 2000 2500 3000
.5
441
10
927 1413
7
3
456
24
478
52
475
82
447
259
12
410
348
12
15
365
436
15
20
263
583
20
298
530
.5
Flow (GPM)
Flow (GPM)
TORQUE
SPEED
(LB IN)
(RPM)
1933
547
PSLGC.PM6, dg, ki
45
Hydraulics
T
F
S
E
R
I
E
S
Catalog 1510-20
Performance Data
T
F
Code 0170
Code 0195
170 cc / rev
195 cc / rev
PRESSURE (BAR)
34.5 69.0 103.4 137.9 172.4 206.9
S
E
R
I
E
S
PRESSURE (BAR)
34.5 69.0 103.4 137.9 172.4 206.9
1.9
1.9
3.8
3.8
7.6
7.6
11.4
11.4
15.1
15.1
18.9
30.3
26.5
26.5
34.1
34.1
45.4
45.4
56.8
56.8
75.7
75.7
Flow (LPM)
Flow (LPM)
TORQUE
SPEED
(nm)
(RPM)
301.3
417
.5
.5
12
12
15
15
20
20
TORQUE
SPEED
(LB IN)
(RPM)
4201
396
Flow (GPM)
Flow (GPM)
PSLGC.PM6, dg, ki
46
Hydraulics
Catalog 1510-20
Performance Data
Code 0240
Code 0280
240 cc / rev
280 cc / rev
34.5
PRESSURE (BAR)
69.0 103.4 137.9 172.4 206.9
34.5
PRESSURE (BAR)
69.0 103.4 137.9 172.4 206.9
1.9
3.8
7.6
11.4
15.1
18.9
26.5
34.1
45.4
56.8
75.7
94.6
TORQUE
SPEED
(nm)
(RPM)
646.0
354
Flow (LPM)
75.7
94.6
Flow (LPM)
.5
.5
12
12
15
15
20
20
25
25
Flow
(GPM)
PSLGC.PM6, dg, ki
TORQUE
SPEED
(LB IN)
(RPM)
47
Hydraulics
5718
354
T
F
Flow (GPM)
Parker Hannifin Corporation
Hydraulic Pump/Motor Division
Greeneville, TN 37744 USA
S
E
R
I
E
S
Catalog 1510-20
Performance Data
T
F
Code 0360
Code 0405
365 cc / rev
405 cc / rev
PRESSURE (BAR)
34.5 69.0 103.4 127.6 137.9 172.4 189.7
S
E
R
I
E
S
PRESSURE (BAR)
34.5 69.0 103.4 127.6 137.9 172.4
75.7
94.6
TORQUE
SPEED
(nm)
(RPM)
879.5
226
94.6
Flow (LPM)
Flow (LPM)
22.2 cu in / rev
24.7 cu in / rev
PRESSURE (PSI)
500 1000 1500 1850 2000 2500 2750
PRESSURE (PSI)
500 1000 1500 1850 2000 2500
.5
.5
12
12
15
15
20
20
25
25
Flow
(GPM)
PSLGC.PM6, dg, ki
TORQUE
SPEED
(LB IN)
(RPM)
48
Hydraulics
7785
226
Flow (GPM)
Parker Hannifin Corporation
Hydraulic Pump/Motor Division
Greeneville, TN 37744 USA
Catalog 1510-20
Performance Data
T
F
Code 0475
475 cc / rev
PRESSURE (BAR)
34.5 69.0 103.4 113.4 127.6 137.9
S
E
R
I
E
S
94.6
TORQUE
SPEED
(nm)
(RPM)
794.0
183
Flow (LPM)
29.1 cu in / rev
PRESSURE (PSI)
500 1000 1500 1645 1850 2000
.5
12
15
20
25
Flow
(GPM)
PSLGC.PM6, dg, ki
TORQUE
SPEED
(LB IN)
(RPM)
49
Hydraulics
7028
183
Catalog 1510-20
Dimensional Data
T
F
"L2"
"L1"
S
E
R
I
E
S
Standard Rotation:
(As viewed from shaft end)
Front Ports - Pressurize "A" to turn Counterclockwise, "B" to turn Clockwise.
Rear Ports - Pressurize "A" to turn Clockwise, "B" to turn Counterclockwise.
0080
0100
191
(7.51)
191
(7.51)
194
196
(7.63) (7.70)
199
202
207
211
221
225
234
(7.82) (7.95) (8.13) (8.32) (8.70) (8.87) (9.20)
13.6
(29.9)
13.6
(30.0)
13.8
13.9
(30.5) (30.7)
14.2
(31.3)
184
(7.25)
184
(7.25)
187
189
(7.37) (7.44)
192
195
200
205
214
218
227
(7.56) (7.69) (7.87) (8.06) (8.44) (8.60) (8.94)
14.2
(31.3)
14.2
(31.4)
14.5
14.6
(31.9) (32.1)
14.8
(32.7)
15.1
(33.3)
15.5
(34.3)
15.8
(34.9)
16.6
(36.6)
17.1
(37.8)
17.8
(39.3)
0080
0100
0170
0195
0240
0280
0360
0405
0475
146
(5.73)
146
(5.73)
149
150
(5.85) (5.92)
153
157
161
166
176
180
188
(6.04) (6.17) (6.35) (6.54) (6.92) (7.08) (7.42)
(lb)
13.9
(30.6)
13.9
(30.7)
14.2
14.3
(31.2) (31.5)
14.5
(32.0)
173
(6.80)
173
(6.80)
176
178
(6.93) (6.99)
180
184
189
194
203
207
216
(7.11) (7.24) (7.43) (7.61) (7.99) (8.15) (8.49)
16.9
(37.2)
16.9
(37.3)
17.2
17.3
(37.8) (38.0)
17.5
(38.6)
Weight
(lb)
0130
0140
0170
0195
14.5
(31.9)
0240
14.9
(32.9)
0280
15.2
(33.5)
0360
16.0
(35.2)
0405
16.5
(36.4)
0475
17.2
(37.9)
SAE "B"
mm
Length "L1"
Weight
(inches)
kg
(lb)
Displacement, Code
0130
0140
mm
(inches)
Weight
Weight
kg
kg
(lb)
14.8
(32.7)
17.8
(39.2)
15.2
(33.6)
18.2
(40.2)
15.5
(34.2)
18.5
(40.8)
16.3
(35.9)
19.3
(42.5)
16.9
(37.2)
19.8
(43.7)
17.5
(38.6)
20.5
(45.2)
PSLGC.PM6, dg, ki
50
Hydraulics
Catalog 1510-20
Dimensional Data
T
F
Mounting
Inch equivalents for metric dimensions are shown in (**)
15.7 (.62)
62.81
(2.473)
2.79 (.110)
S
E
R
I
E
S
82.55
(3.250)
2X 13.5 (17/32) on a
106.38 (4.188) BC
65.3 (2.57)
9.4 (.37)
15.7 (.62)
101.57 (3.999)
62.81 (2.473)
15.7 (.62)
4 Bolt Magneto
22 30'
2.8 (.11)
82.52 (3.249)
133.4 (5.25)
PSLGC.PM6, dg, ki
51
Hydraulics
Catalog 1510-20
Dimensional Data
T
F
S
E
R
I
E
S
Mounting, Wheel
Inch equivalents for metric dimensions are shown in (**)
46.7 (1.84)
63.83 (2.513)
36.8
(1.45)
39.9 (1.57)
45
Wheel
62.99 82.52
(2.480) (3.249)
25.4 (1.00)
25.4 (1.00)
.16 (4.1)
Min
36.8 (1.45)
46.7 (1.84)
45
126.95 ( 4.998)
88.85 (3.498)
19.1 (.75)
44.2 (1.74)
45
107.90 (4.248)
126.95 ( 4.998)
Wheel, Optional
95.3 (3.75)
Ref
PSLGC.PM6, dg, ki
52
Hydraulics
Catalog 1510-20
Dimensional Data
T
F
Porting
SAE O-Ring & BSPF
Manifold
64.3
(2.53)
64.3
(2.53)
31.75 (1.250)
S
E
R
I
E
S
22.86 (.900)
63.50 (2.500)
25.40 (1.000)
45.72 (1.800)
14.27 (.562)
28.58 (1.125)
62.99 (2.480)
Rear Ports
65.53 (2.580)
7/8-14 SAE O-Ring
22.86 (.900)
A
129.5
(5.10)
14.27 (.562)
65.53 (2.580)
28.58 (1.125)
22.86 (.900)
A
63.50 (2.500)
Manifold
45.72 (1.800)
31.75 (1.250)
4 x 5/16-18 UNC thd
x .50 Min Deep
PSLGC.PM6, dg, ki
53
Hydraulics
Catalog 1510-20
Dimensional Data
T
F
S
E
R
I
E
S
Shafts
Inch equivalents for metric dimensions are shown in (**)
48.8 (1.92)
25.65 ( 1.010)
x 6.38 (.251) Wide
57.4 (2.26)*
47.2
(1.86)
38.33 (1.509)
4.3 (.17)
27.99 (1.102)
25.40 (1.000)
31.75 (1.250)
27.31 (1.075)
1.24 (.049)
23.52 (.926)
5/8-18 UNF thd
x 19.1 (.75) Min Deep
19.00 (.748)
Keyway Center Line
37.34 (1.470)
1" Keyed
49.5 (1.95)
48.8 (1.92)
4.3 (.17)
23.50 (.925)
x 7 (.2749)
2.8 (.11)
37.34 (1.47)
9.09 (.358)
1.24 (.049)
28.00 (1.102)
23.52 (.926)
M6 x 1-6H thd
19.1 (.75) Min Deep
25 mm Keyed
1" 6B Spline
61.7 (2.43)
60.2 (2.37)
2.8 (.11)
50.3 (1.98)
36.50 (1.437)
x 7.90 (.311)
35.1 (1.38)
4.22 (.166)
7.90 (.311)
Woodruff Key
34.90 (1.374)
1 1/4" Keyed
25.000 (.9837)
1 1/4" Taper
PSLGC.PM6, dg, ki
54
Hydraulics
Catalog 1510-20
Speed Sensor
T
F
S
E
R
I
E
S
Features
Operating Voltage Range .......... 4.5 to 24 VDC
Operating Temperature ............. -40 C to 93 C
(-40 F to 200 F)
2
N/C
1
+
3
-
4
Output
= Resistor Value
Desired Sink Current (0-20 mA 20%)
(K - Ohms)
+ 4.5 to 24 VDC
Pin # 4
Output
Pin # 3
- Negative
Pin # 2
No Connection
SENSOR
On State Current: 5 mA
Higher wattage resistor will be needed for higher
sink current.
+V Off State
Pin # 1
PSLGC.PM6, dg, ki
55
Hydraulics
Catalog 1510-20
Ordering Information
T
F
TF
XXXX
Series
Displacement
Mounting
Porting
S
E
R
I
E
S
Code Displacement
0080
0100
0130
0140
0170
0195
0240
0280
0360
0405
0475
04.9
06.1
07.8
08.6
10.3
12.0
14.5
17.1
22.2
24.7
29.1
Code
A
B
M
U
L
W*
*
cu
cu
cu
cu
cu
cu
cu
cu
cu
cu
cu
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
Code
A
B
E
J
M*
S
T**
Shaft
1"6B Spline
1" Keyed
1 1/4" Keyed
10B Spline
1 1/4" 14 Tooth Spline
19 Tooth Spline
15 Tooth Spline
1 1/4" Tapered
25mm Keyed
13 Tooth Spline
XXXX
Rotation
Options
Code
01
02
03
04
05
06
07
08
22
28
Porting
**
Shaft
Mounting
Code
XX
Code
AAAA
AAAB
AAAC
AAFC
AAAF***
AABP***
AAAG
AAAH
AAHD
AAAJ
AAFG
AAAT*
AAFX*
AAAU*
AAGF*
AABJ
AABK
AABL
AABM
BBBA*
BBBM*
BBBG*
BBBJ*
BBBB*
BBBN*
BBBK*
BBBC*
BBBF*
BBBD*
BBBW*
FFAA
FFAB
FFAH
FFAJ
*
0
1
Rotation
Standard
Reverse Timed Manifold
Options
Black Paint
No Paint
Double Paint
White Epoxy Paint
Castle Nut, Black Paint
Castle Nut, No Paint
Viton Seals, Black Paint
Viton Seals, No Paint
Viton Seals, White Epoxy Paint
Vespel Commutator Seal, Black Paint
Vespel Commutator Seal, No Paint
Bidirectional Shuttle (11:00**), Black Paint
Bidirectional Shuttle (11:00**), No Paint
Bidirectional Shuttle (11:00**), Castle Nut, Black Paint
Bidirectional Shuttle (11:00**), Castle Nut, No Paint
Free Running Rotorset, Black Paint
Free Running Rotorset, No Paint
Free Running Rotorset, No Commutator Seal, Black Paint
Free Running Rotorset, No Commutator Seal, No Paint
1000 PSI Internal Bidirectional Relief, Black Paint
1000 PSI Internal Bidirectional Relief, No Paint
1500 PSI Internal Bidirectional Relief, Black Paint
1500 PSI Internal Bidirectional Relief, No Paint
2000 PSI Internal Bidirectional Relief, Black Paint
2000 PSI Internal Bidirectional Relief, No Paint
2000 PSI Internal Bidirectional Relief, Castle Nut, Black Paint
3000 PSI Internal Bidirectional Relief, Black Paint
3000 PSI Internal Bidirectional Relief, No Paint
4000 PSI Internal Bidirectional Relief, Black Paint
4000 PSI Internal Bidirectional Relief, No Paint
Internal Speed Sensor, Black Paint
Internal Speed Sensor, No Paint
Internal Speed Sensor, Castle Nut, No Paint
Internal Speed Sensor, Castle Nut, Black Paint
**
***
PSLGC.PM6, dg, ki
56
Hydraulics
Catalog 1510-20
Technical Information
T
F
Brake Motor
This motor/brake combination consists of a TF
Series motor built into a front mounted brake. The
brake is a wet disc, spring set, hydraulically released
unit. When hydraulic pressure is absent at the pilot
port of the brake, internal springs will hold against
6900 lb in of torque. The brake will start to release
when 190 PSI is present in the brake pilot port and
will be fully disengaged when that pressure reaches
260 PSI. The pilot port is capable of withstanding
the maximum operating pressure of the TF Series
motor.
S
E
R
I
E
S
Dimensions
Inch equivalents for metric dimensions are shown in (**)
218.4 (8.60)
"L"
6.4 (.25)
PSLGC.PM6, dg, ki
57
Hydraulics
Catalog 1510-20
Ordering Information
T
F
TF
XXXX
Series
Displacement
Mounting
Porting
S
E
R
I
E
S
Code Displacement
0080
0100
0130
0140
0170
0195
0240
0280
0360
0405
0475
04.9
06.1
07.8
08.6
10.3
12.0
14.5
17.1
22.2
24.7
29.1
Code
8
cu
cu
cu
cu
cu
cu
cu
cu
cu
cu
cu
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
Code
A
B
S
Mounting
Wheel Brake
Code
03
05
08
31
32
36
Shaft
1
1
1
1
1
1
1/4"
1/4"
1/4"
1/2"
1/2"
1/2"
Keyed
14 Tooth Spline
Tapered
Tapered
Keyed
17 Tooth Spline
XX
Shaft
Porting
XXXX
Rotation
Options
Code
Code
AAAA
AAAB
AAAC
AAFC
AAAF***
AABP***
AAAG
AAAH
AAHD
AAAJ
AAFG
AAAT*
AAFX*
AAAU*
AAGF*
AABJ
AABK
AABL
AABM
BBBA*
BBBM
BBBG*
BBBJ*
BBBB*
BBCC
BBBK*
BBBC*
BBBF*
BBBD*
BBBW*
*
0
1
Rotation
Standard
Reverse Timed Manifold
Options
Black Paint
No Paint
Double Paint
White Epoxy Paint
Castle Nut, Black Paint
Castle Nut, No Paint
Viton Seals, Black Paint
Viton Seals, No Paint
Viton Seals, White Epoxy Paint
Vespel Commutator Seal, Black Paint
Vespel Commutator Seal, No Paint
Bidirectional Shuttle (11:00**), Black Paint
Bidirectional Shuttle (11:00**), No Paint
Bidirectional Shuttle (11:00**), Castle Nut, Black Paint
Bidirectional Shuttle (11:00**), Castle Nut, No Paint
Free Running Rotorset, Black Paint
Free Running Rotorset, No Paint
Free Running Rotorset, No Commutator Seal, Black Paint
Free Running Rotorset, No Commutator Seal, No Paint
1000 PSI Internal Bidirectional Relief, Black Paint
1000 PSI Internal Bidirectional Relief, No Paint
1500 PSI Internal Bidirectional Relief, Black Paint
1500 PSI Internal Bidirectional Relief, No Paint
2000 PSI Internal Bidirectional Relief, Black Paint
2000 PSI Internal Bidirectional Relief, No Paint
2000 PSI Internal Bidirectional Relief, Castle Nut, Black Paint
3000 PSI Internal Bidirectional Relief, Black Paint
3000 PSI Internal Bidirectional Relief, No Paint
4000 PSI Internal Bidirectional Relief, Black Paint
4000 PSI Internal Bidirectional Relief, No Paint
**
***
PSLGC.PM6, dg, ki
58
Hydraulics
Catalog 1510-20
Technical Information
T
F
Dimensions
Inch equivalents for metric dimensions are shown in (**)
S
E
R
I
E
S
4.8 (.19)
2 x 7/8-14 SAE
O-Ring
21.6 (.85)
This dimension
applies to both ports.
Rear View
Standard Rotation:
(As viewed from shaft end)
Front Ports - Pressurize "A" to turn Counterclockwise, "B" to turn Clockwise.
Rear Ports - Pressurize "A" to turn Clockwise, "B" to turn Counterclockwise.
4 x 13.5 (.531) On
171.42 (6.749) BC Spotface
20.3 (.80)
45
196.8 (7.75)
Front View
PSLGC.PM6, dg, ki
59
Hydraulics
Catalog 1510-20
Technical Information
T
F
S
E
R
I
E
S
Clutch Motor
The Clutch Motor consists of a TF Series motor
separated from the output shaft by a face spline
coupling. The coupling is held apart by springs,
disconnecting the motor from the output shaft,
allowing the output shaft to freewheel. When
hydraulic pressure is applied to either motor port,
the springs separating the coupling are overcome
and the motor is coupled to the output shaft.
Notes:
1) Consult factory if clutch is to be engaged
while output shaft is rotating.
2) Clutch may not disengage if there is residual torque on output shaft when pressure
is lost at motor ports.
3) Minimum pressure to engage clutch - 125
PSI.
4) To assure clutch disengagement, pressure
at motor ports must be below 70 PSI.
5) Shaft will freewheel when pressure is lost at
motor ports whether by design or inadvertently. The possibility of unplanned freewheeling should be considered in the
design of the system.
Dimensions
Inch equivalents for metric dimensions are shown in (**)
"L1" +(3.1)
143.0 (5.63)
63.5 (2.50)
2.79 (.11)
44.4 (1.75) Min
Full Spline
A
129.5
(5.10)
Max.
82.52 (3.249)
2 x 7/8-14 SAE
O-Ring Ports
Standard Rotation:
(As viewed from shaft end)
Front Ports - Pressurize "A" to turn Counterclockwise, "B" to turn Clockwise.
Rear Ports - Pressurize "A" to turn Clockwise, "B" to turn Counterclockwise.
PSLGC.PM6, dg, ki
60
Hydraulics
Catalog 1510-20
Technical Information
T
F
Dimensions
Inch equivalents for metric dimensions are shown in (**)
62.81 (2.473)
22 30'
S
E
R
I
E
S
25.4 (1.00)
2 PL
5/8-18 UNF
thd x 1.00 Deep
45
TF
XXXX
XX
XXXX
Series
Displacement
Mounting
Porting
Shaft
Rotation
Options
Code Displacement
0080
0100
0130
0140
0170
0195
0240
0280
0365
Code
G
04.9
06.1
07.8
08.6
10.3
12.0
14.5
17.1
22.2
cu
cu
cu
cu
cu
cu
cu
cu
cu
Code
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
Porting
7/8"-14 SAE O-Ring
Code
AAAA
AAAB
AAAC
AAFC
AAAG
AAAH
AAHD
AAAJ
AAFG
AAAT
AAFX
AABJ
AABK
AABL
AABM
BBBA
BBBM
BBBG
BBBJ
BBBB
BBCC
BBBC
BBBF
BBBD
BBBW
Mounting
Magneto, Clutch
Code
Code
Shaft
03
1 1/4" Keyed
05
**
0
1
Rotation
Standard
Reverse Timed Manifold
Options
Black Paint
No Paint
Double Paint
White Epoxy Paint
Viton Seals, Black Paint
Viton Seals, No Paint
Viton Seals, White Epoxy Paint
Vespel Commutator Seal, Black Paint
Vespel Commutator Seal, No Paint
Bidirectional Shuttle (11:00**), Black Paint
Bidirectional Shuttle (11:00**), No Paint
Free Running Rotorset, Black Paint
Free Running Rotorset, No Paint
Free Running Rotorset, No Commutator Seal, Black Paint
Free Running Rotorset, No Commutator Seal, No Paint
1000 PSI Internal Bidirectional Relief, Black Paint
1000 PSI Internal Bidirectional Relief, No Paint
1500 PSI Internal Bidirectional Relief, Black Paint
1500 PSI Internal Bidirectional Relief, No Paint
2000 PSI Internal Bidirectional Relief, Black Paint
2000 PSI Internal Bidirectional Relief, No Paint
3000 PSI Internal Bidirectional Relief, Black Paint
3000 PSI Internal Bidirectional Relief, No Paint
4000 PSI Internal Bidirectional Relief, Black Paint
4000 PSI Internal Bidirectional Relief, No Paint
PSLGC.PM6, dg, ki
61
Hydraulics
Catalog 1510-20
Technical Information
T
G
Options
S
E
R
I
E
S
Features
TG Specifications
Code
Displacement
0140
0170
0195
0240
0280
0335
140
(8.6)
169
(10.3)
195
(11.9)
237
(14.5)
280
(17.1)
337
(20.6)
405
(24.7)
476
(29.1)
528
442
381
314
266
221
185
bar
(psid)
206.9
(3000)
206.9
(3000)
206.9
(3000)
206.9
(3000)
206.9
(3000)
206.9
(3000)
bar
(psid)
275.9
(4000)
275.9
(4000)
275.9
(4000)
275.9
(4000)
275.9
(4000)
406.8
(3601)
494.9
(4380)
576.0
(5098)
704.9
(6239)
824.9
(7301)
541.6
(4794)
659.6
(5838)
765.6
(6776)
cc/rev
(cu in/rev)
0405
0475
0530
0625
0785
0960
529
(32.3)
624
(38.0)
786
(48.0)
958
(58.5)
157
141
120
95
78
172.4
(2500)
137.9
(2000)
137.9
(2000)
120.7
(1750)
103.4
(1500)
69.0
(1000)
275.9
(4000)
241.4
(3500)
206.9
(3000)
172.4
(2500)
155.2
(2250)
137.9
(2000)
103.4
(1500)
1006.4
(8908)
991.1
(8772)
923.4
(8173)
PSLGC.PM6, dg, ki
62
Hydraulics
Catalog 1510-20
Technical Information
Performance Data
Flange Mount
Side Load - kg (lbs)
3628.8
(8000)
2721.6
(6000)
Continuous
1814.4
(4000)
Intermittent*
907.2
(2000)
S
E
R
I
E
S
Wheel Mount
Side Load - kg (lbs)
3628.8
(8000)
2721.6
(6000)
1814.4
(4000)
907.2
(2000)
0
0
Multiply
3
Allowable
Radial Load
By These
2
Factors
1
0
0 2 4 6 8 10 12
Life In Millions Of Revolutions
PSLGC.PM6, dg, ki
63
Hydraulics
T
G
Catalog 1510-20
Performance Data
Code 0140
Code 0170
140 cc / rev
170 cc / rev
PRESSURE (BAR)
34.5 69.0 103.4 137.9 172.4 206.9 241.4 275.9
T
G
S
E
R
I
E
S
PRESSURE (BAR)
1.9
58.6 119.8
9
4
1.9
3.8
3.8
7.6
7.6
11.4
11.4
15.1
15.1
18.9
18.9
26.5
26.5
34.1
34.1
45.4
45.4
56.8
56.8
75.7
75.7
94.6
94.6
Flow (LPM)
TORQUE
SPEED
8.6 cu in / rev
Flow (LPM)
304.5
598
10.3 cu in / rev
PRESSURE (PSI)
.5
(nm)
(RPM)
519 1060
9
4
4000
TORQUE
SPEED
PRESSURE (PSI)
3899
12
.5
4000
5402
8
4447
12
5587
25
4608
29
5652
44
4644
52
5716
64
4701
76
5761
83
4763
123
5818
123
4794
171
5838
163
12
4794
243
12
5823
223
15
4771
314
15
5801
283
20
299
528
4692
435
20
5714
383
25
173
660
4579
555
25
239
554
5591
483
Flow (GPM)
Performance data
is typical. Actual
data may vary
slightly from one
production motor
to another.
Flow (GPM)
PSLGC.PM6, dg, ki
64
Hydraulics
Catalog 1510-20
Performance Data
Code 0195
Code 0240
195 cc / rev
240 cc / rev
PRESSURE (BAR)
34.5 69.0 103.4 137.9 172.4 206.9 241.4 275.9
PRESSURE (BAR)
34.5 69.0 103.4 137.9 172.4 206.9 241.4 275.9
1.9
82.8 169.8
7
3
1.9
3.8
3.8
7.6
7.6
11.4
11.4
15.1
15.1
18.9
18.9
26.5
26.5
34.1
34.1
45.4
45.4
56.8
56.8
75.7
75.7
94.6
94.6
Flow (LPM)
11.9 cu in / rev
TORQUE
SPEED
733 1503
7
3
534.3
421
Flow (LPM)
14.5 cu in / rev
PRESSURE (PSI)
500 1000 1500 2000 2500 3000 3500 4000
PRESSURE (PSI)
.5
(nm)
(RPM)
4000
TORQUE
SPEED
(LB IN)
(RPM)
4813
11
.5
6375
6
8037
9
6595
19
8184
20
6635
35
8234
33
6710
52
8271
47
6772
86
8298
73
6774
120
8271
100
12
6776
172
12
8224
140
15
6765
233
15
8212
180
20
6663
310
20
8081
248
25
6500
397
25
7913
317
Flow (GPM)
Performance data
is typical. Actual
data may vary
slightly from one
production motor
to another.
Flow (GPM)
PSLGC.PM6, dg, ki
65
Hydraulics
T
G
S
E
R
I
E
S
Catalog 1510-20
Performance Data
Code 0280
Code 0335
280 cc / rev
335 cc / rev
PRESSURE (BAR)
34.5 69.0 103.4 137.9 172.4 206.9 241.4 275.9
T
G
S
E
R
I
E
S
34.5
PRESSURE (BAR)
1.9
1.9
3.8
3.8
7.6
7.6
11.4
11.4
15.1
15.1
18.9
18.9
26.5
26.5
34.1
34.1
45.4
45.4
56.8
56.8
75.7
75.7
94.6
94.6
Flow (LPM)
17.1 cu in / rev
.5
TORQUE
SPEED
(nm)
(RPM)
PRESSURE (PSI)
500 1000 1500 2000 2500 3000 3500 4000
TORQUE
1056 2177 3323 4512
SPEED
5
4
2
1
770.0
286
Flow (LPM)
20.6 cu in / rev
PRESSURE (PSI)
9350
2
.5
9350
2
9400
11
9536
19
9596
30
9641
41
9706
63
9707
85
12
9652
118
12
15
9625
152
15
20
9499
209
20
25
9311
267
25
Flow (GPM)
Performance data
is typical. Actual
data may vary
slightly from one
production motor
to another.
Flow (GPM)
PSLGC.PM6, dg, ki
66
Hydraulics
Catalog 1510-20
Performance Data
Code 0405
405 cc / rev
24.7 cu in / rev
PRESSURE (PSI)
500 1000 1500 2000 2500 3000 3500
PRESSURE (BAR)
34.5 69.0 103.4 137.9 172.4 206.9 241.4
1.9
3.8
7.6
11.4
15.1
18.9
26.5
34.1
45.4
12
56.8
15
75.7
20
94.6
25
.5
T
G
Flow (GPM)
Flow (LPM)
TORQUE
SPEED
(nm)
(RPM)
TORQUE
SPEED
712.1
212
(LB IN)
(RPM)
9848
197
Performance data
is typical. Actual
data may vary
slightly from one
production motor
to another.
PSLGC.PM6, dg, ki
67
Hydraulics
S
E
R
I
E
S
Catalog 1510-20
Performance Data
Code 0475
475 cc / rev
PRESSURE (BAR)
34.5 69.0 103.4 137.9 172.4 206.9
T
G
S
E
R
I
E
S
1.9
3.8
7.6
11.4
15.1
18.9
26.5
34.1
45.4
12
56.8
15
75.7
20
94.6
25
113.6
30
.5
Flow (LPM)
Flow (GPM)
TORQUE
SPEED
(nm)
(RPM)
TORQUE
SPEED
283.0
236
(LB IN)
(RPM)
6766
230
Performance data
is typical. Actual
data may vary
slightly from one
production motor
to another.
PSLGC.PM6, dg, ki
68
Hydraulics
Catalog 1510-20
Performance Data
Code 0530
530 cc / rev
32.2 cu in / rev
PRESSURE (BAR)
34.5 69.0 103.4 137.9 172.4
PRESSURE (PSI)
500 1000 1500 2000 2500
1.9
.5
3.8
7.6
11.4
15.1
18.9
26.5
34.1
45.4
12
56.8
15
75.7
20
94.6
25
113.6
30
Flow (LPM)
T
G
Flow (GPM)
TORQUE
SPEED
(nm)
(RPM)
TORQUE
SPEED
304.8
211
(LB IN)
(RPM)
9814
197
Performance data
is typical. Actual
data may vary
slightly from one
production motor
to another.
PSLGC.PM6, dg, ki
69
Hydraulics
S
E
R
I
E
S
Catalog 1510-20
Performance Data
Code 0625
625 cc / rev
38.0 cu in /PRESSURE
rev
(PSI)
PRESSURE (BAR)
34.5 69.0 103.4 120.7 155.2
T
G
S
E
R
I
E
S
1.9
219.1 518.9
2
1
3.8
7.6
11.4
15.1
18.9
26.5
34.1
45.4
12
56.8
15
75.7
20
94.6
25
113.6
30
.5
Flow (LPM)
Flow (GPM)
TORQUE
SPEED
(nm)
(RPM)
TORQUE
SPEED
367.2
180
(LB IN)
(RPM)
7443
172
Performance data
is typical. Actual
data may vary
slightly from one
production motor
to another.
PSLGC.PM6, dg, ki
70
Hydraulics
Catalog 1510-20
Performance Data
Code 0785
785 cc / rev
48.0 cu in / rev
PRESSURE (BAR)
34.5 69.0 103.4 137.9
PRESSURE (PSI)
500 1000 1500 2000
1.9
.5
3.8
7.6
11.4
15.1
18.9
26.5
34.1
45.4
12
56.8
15
75.7
20
94.6
25
113.6
30
Flow (LPM)
T
G
Flow (GPM)
TORQUE
SPEED
(nm)
(RPM)
TORQUE
SPEED
856.6
137
Performance data
is typical. Actual
data may vary
slightly from one
production motor
to another.
PSLGC.PM6, dg, ki
71
Hydraulics
S
E
R
I
E
S
Catalog 1510-20
Performance Data
Code 0960
58.5PRESSURE
cu in / rev
(PSI)
960 ccPRESSURE
/ rev
(BAR)
34.5
T
G
S
E
R
I
E
S
69.0 103.4
1.9
.5
3.8
7.6
11.4
15.1
18.9
26.5
34.1
45.4
12
56.8
15
75.7
20
94.6
25
30
113.6
68.1
118
555.7 1036.0
117 113
Flow (GPM)
Flow (LPM)
TORQUE
SPEED
(nm)
(RPM)
TORQUE
SPEED
555.7
117
(LB IN)
(RPM)
9170
113
Performance data
is typical. Actual
data may vary
slightly from one
production motor
to another.
PSLGC.PM6, dg, ki
72
Hydraulics
Catalog 1510-20
Dimensional Data
"L2"
"L1"
T
G
Standard Rotation:
(As viewed from shaft end)
Front Ports - Pressurize "A" to turn Counterclockwise, "B" to turn Clockwise.
Rear Ports - Pressurize "A" to turn Clockwise, "B" to turn Counterclockwise.
Weight
(lb)
0140
0170
0195
0240
0280
0335
0405
0415
0530
0625
0785
0960
196
199
202
207
211
218
225
234
240
250
269
288
(7.70) (7.82) (7.95) (8.13) (8.32) (8.57) (8.86) (9.20) (9.45) (9.82) (10.57) (11.32)
14.2
(31.4)
14.5
14.7 15.1 15.5
(32.0) (32.5) (33.3) (34.2)
15.9
(35.1)
16.5
17.2
(36.4) (37.9)
17.9 18.6
20.2
(39.5) (41.1) (44.5)
21.9
(48.3)
SAE "B"
Length "L1"
mm
(inches)
189
192
195
200
205
211
219
227
233
243
262
281
(7.44) (7.56) (7.69) (7.87) (8.06) (8.31) (8.60) (8.94) (9.19) (9.56) (10.31) (11.06)
(lb)
14.9
(32.8)
15.2
15.3 15.7 16.1
(33.4) (33.9) (34.7) (35.6)
16.6
(36.5)
17.1
17.8
(37.8) (39.3)
18.6 19.3
20.8
(40.9) (42.5) (45.9)
22.5
(49.7)
Displacement, Code
0140
0170
0335
0405
0530
0960
(inches)
150
(5.92)
154
157
161
166
173
180
188
195
204
223
242
(6.04) (6.17) (6.35) (6.54) (6.79) (7.08) (7.42) (7.67) (8.04) (8.79) (9.54)
kg
Weight
0195
0240
0280
0415
0625
0785
Weight
kg
14.6
(lb)
14.8
15.1
15.5
15.9
16.3
(35.8)
16.9
17.5
(32.2)
mm
178
181
184
189
193
200
207
216
222
232
251
270
(6.99) (7.11) (7.24) (7.43) (7.61) (7.86) (8.15) (8.49) (8.74) (9.12) (9.87) (10.62)
(37.2) (38.6)
18.3
19.0
20.5
22.2
(49.0)
Optional Wheel
Mount
Length "L2"
(inches)
Weight
kg
(lb)
17.6
(38.7)
17.8
18.1 18.4 18.8
(39.3) (39.8) (40.6) (41.5)
19.3
(42.4)
19.8
20.5
(43.7) (45.2)
21.3 22.0
23.5
(46.8) (48.4) (51.8)
PSLGC.PM6, dg, ki
73
Hydraulics
25.2
(55.6)
S
E
R
I
E
S
Catalog 1510-20
Dimensional Data
Mounting
Inch equivalents for metric dimensions are shown in (**)
15.7 (.62)
62.81
(2.473)
2.79 (.110)
82.55
(3.250)
T
G
S
E
R
I
E
S
2X 13.5 (17/32) on a
106.38 (4.188) BC
65.3 (2.57)
9.4 (.37)
15.7 (.62)
174.5 (6.87)
101.57 (3.999)
62.81 (2.473)
15.7 (.62)
22 30'
2.8 (.11)
82.52 (3.249)
133.4 (5.25)
4 Bolt Magneto
PSLGC.PM6, dg, ki
74
Hydraulics
Catalog 1510-20
Dimensional Data
Mounting, Wheel
Inch equivalents for metric dimensions are shown in (**)
46.7 (1.84)
63.83 (2.513)
36.8
(1.45)
39.9 (1.57)
45
Wheel
62.99 82.52
(2.480) (3.249)
25.4 (1.00)
25.4 (1.00)
.16 (4.1)
Min
36.8 (1.45)
46.7 (1.84)
45
126.95 ( 4.998)
88.85 (3.498)
19.1 (.75)
44.2 (1.74)
45
107.90 (4.248)
126.95 ( 4.998)
Wheel, Optional
95.3 (3.75)
Ref
PSLGC.PM6, dg, ki
75
Hydraulics
T
G
S
E
R
I
E
S
Catalog 1510-20
Dimensional Data
Porting
Inch equivalents for metric dimensions are shown in (**)
Manifold
64.3
(2.53)
64.3
(2.53)
31.75 (1.250)
22.86 (.900)
63.50 (2.500)
25.40 (1.000)
T
G
14.27 (.562)
28.58 (1.125)
Rear Ports
62.99 (2.480)
65.53 (2.580)
7/8-14 SAE O-Ring
22.86 (.900)
A
129.5
(5.10)
S
E
R
I
E
S
45.72 (1.800)
45.72 (1.800)
14.27 (.562)
65.53 (2.580)
28.58 (1.125)
22.86 (.900)
A
63.50 (2.500)
Manifold
45.72 (1.800)
31.75 (1.250)
4 x 5/16-18 UNC thd
x .50 Min Deep
PSLGC.PM6, dg, ki
76
Hydraulics
Catalog 1510-20
Dimensional Data
Shafts
Inch equivalents for metric dimensions are shown in (**)
48.8 (1.92)
60.2 (2.37)
25.65 ( 1.010)
x 6.38 (.251) Wide
2.8 (.11)
36.50 (1.437)
x 7.90 (.311)
50.3 (1.98)
38.33 (1.509)
4.3 (.17)
4.22 (.166)
27.99 (1.102)
25.40 (1.000)
1.24 (.049)
37.34 (1.470)
34.90 (1.374)
23.52 (.926)
19.00 (.748)
Keyway Center Line
59.9 (2.36)
1 1/4" Keyed
2.8 (.11)
T
G
4.29 (.169)
34.91 (1.374)
61.7 (2.43)
35.1 (1.38)
7.90 (.311)
Woodruff Key
70.1
(2.76)
41.4 (1.63)
7.90 (.311)
Woodruff Key
1 3/8" Keyed
38.0 (1.5)
Taper Per Ft.
1 3/8" Taper
1 1/4" Taper
48.8 (1.92)
4.3 (.17)
2.8 (.11)
57.4 (2.26)*
37.34 (1.47)
47.2
(1.86)
1.24 (.049)
23.52 (.926)
31.75 (1.250)
27.31 (1.075)
1" 6B Spline
PSLGC.PM6, dg, ki
77
Hydraulics
S
E
R
I
E
S
Catalog 1510-20
Speed Sensor
T
G
Features
Operating Voltage Range .......... 4.5 to 24 VDC
S
E
R
I
E
S
2
N/C
1
+
3
-
4
Output
= Resistor Value
Desired Sink Current (0-20 mA 20%)
(K - Ohms)
+ 4.5 to 24 VDC
Pin # 4
Output
Pin # 3
- Negative
Pin # 2
No Connection
SENSOR
On State Current: 5 mA
Higher wattage resistor will be needed for higher
sink current.
+V Off State
Pin # 1
PSLGC.PM6, dg, ki
78
Hydraulics
Catalog 1510-20
Ordering Information
TG
XXXX
Series
Displacement
Mounting
Porting
Code Displacement
0140
0170
0195
0240
0280
0335
0405
0475
0530
0625
0785
0960
08.6
10.3
11.9
14.5
17.1
20.6
24.7
29.1
32.3
38.0
48.0
58.5
Code
A
B
M
U
L
W*
*
cu
cu
cu
cu
cu
cu
cu
cu
cu
cu
cu
cu
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
Code
A
B
E
J
M*
S
T**
Code
01
02
03
04
05
06
07
08
19
20
Porting
**
Shaft
1"6B Spline
1" Keyed
1 1/4" Keyed
10B Spline
1 1/4" 14 Tooth Spline
19 Tooth Spline
15 Tooth Spline
1 1/4" Tapered
1 3/8" Tapered
1 3/8" Keyed
Code
AAAA
AAAB
AAAC
AAFC
AAAF***
AABP***
AAAG
AAAH
AAHD
AAAJ
AAFG
AAAT*
AAFX*
AAAU*
AAGF*
AABJ****
AABK****
AABL****
AABM****
BBBA*
BBBM*
BBBG*
BBBJ*
BBBB*
BBBN*
BBBK*
BBBC*
BBBF*
BBBD*
BBBW*
FFAA
FFAB
FFAH
FFAJ
*
**
***
****
PSLGC.PM6, dg, ki
79
Hydraulics
Shaft
Mounting
Code
XX
0
1
XXXX
Rotation
Options
Rotation
Standard
Reverse Timed Manifold
Options
Black Paint
No Paint
Double Paint
White Epoxy Paint
Castle Nut, Black Paint
Castle Nut, No Paint
Viton Seals, Black Paint
Viton Seals, No Paint
Viton Seals, White Epoxy Paint
Vespel Commutator Seal, Black Paint
Vespel Commutator Seal, No Paint
Bidirectional Shuttle (11:00**), Black Paint
Bidirectional Shuttle (11:00**), No Paint
Bidirectional Shuttle (11:00**), Castle Nut, Black Paint
Bidirectional Shuttle (11:00**), Castle Nut, No Paint
Free Running Rotorset, Black Paint
Free Running Rotorset, No Paint
Free Running Rotorset, No Commutator Seal, Black Paint
Free Running Rotorset, No Commutator Seal, No Paint
1000 PSI Internal Bidirectional Relief, Black Paint
1000 PSI Internal Bidirectional Relief, No Paint
1500 PSI Internal Bidirectional Relief, Black Paint
1500 PSI Internal Bidirectional Relief, No Paint
2000 PSI Internal Bidirectional Relief, Black Paint
2000 PSI Internal Bidirectional Relief, No Paint
2000 PSI Internal Bidirectional Relief, Castle Nut, Black Paint
3000 PSI Internal Bidirectional Relief, Black Paint
3000 PSI Internal Bidirectional Relief, No Paint
4000 PSI Internal Bidirectional Relief, Black Paint
4000 PSI Internal Bidirectional Relief, No Paint
Internal Speed Sensor, Black Paint
Internal Speed Sensor, No Paint
Internal Speed Sensor, Castle Nut, No Paint
Internal Speed Sensor, Castle Nut, Black Paint
T
G
S
E
R
I
E
S
Catalog 1510-20
Technical Information
Brake Motor
This motor/brake combination consists of a TG
Series motor built into a front mounted brake. The
brake is a wet disc, spring set, hydraulically released
unit. When hydraulic pressure is absent at the pilot
port of the brake, internal springs will hold against
10,200 lb in of torque. The brake will start to release
when 360 PSI is present in the brake pilot port and
will be fully disengaged when that pressure reaches
460 PSI. The pilot port is capable of withstanding
the maximum operating pressure of the TG Series
motor.
T
G
S
E
R
I
E
S
Dimensions
Inch equivalents for metric dimensions are shown in (**)
218.4 (8.60)
"L"
6.4 (.25)
PSLGC.PM6, dg, ki
80
Hydraulics
Catalog 1510-20
Ordering Information
TG
XXXX
Series
Displacement
Mounting
Porting
Code Displacement
0140
0170
0195
0240
0280
0335
0405
0475
0530
0625
0785
0960
08.6
10.3
11.9
14.5
17.1
20.6
24.7
29.1
32.3
38.0
48.0
58.5
Code
8
cu
cu
cu
cu
cu
cu
cu
cu
cu
cu
cu
cu
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
Code
A
B
S
Mounting
Wheel Brake
Code
03
05
08
31
32
36
Shaft
1
1
1
1
1
1
1/4"
1/4"
1/4"
1/2"
1/2"
1/2"
Keyed
14 Tooth Spline
Tapered
Tapered
Keyed
17 Tooth Spline
XX
Shaft
Porting
Code
Code
AAAA
AAAB
AAAC
AAFC
AAAF***
AABP***
AAAG
AAAH
AAHD
AAAJ
AAFG
AAAT*
AAFX*
AAAU*
AAGF*
AABJ****
AABK****
AABL****
AABM****
BBBA*
BBBM*
BBBG*
BBBJ*
BBBB*
BBCC*
BBBK*
BBBC*
BBBF*
BBBD*
BBBW*
*
**
***
****
0
1
XXXX
Rotation
Options
Rotation
Standard
Reverse Timed Manifold
Options
Black Paint
No Paint
Double Paint
White Epoxy Paint
Castle Nut, Black Paint
Castle Nut, No Paint
Viton Seals, Black Paint
Viton Seals, No Paint
Viton Seals, White Epoxy Paint
Vespel Commutator Seal, Black Paint
Vespel Commutator Seal, No Paint
Bidirectional Shuttle (11:00**), Black Paint
Bidirectional Shuttle (11:00**), No Paint
Bidirectional Shuttle (11:00**), Castle Nut, Black Paint
Bidirectional Shuttle (11:00**), Castle Nut, No Paint
Free Running Rotorset, Black Paint
Free Running Rotorset, No Paint
Free Running Rotorset, No Commutator Seal, Black Paint
Free Running Rotorset, No Commutator Seal, No Paint
1000 PSI Internal Bidirectional Relief, Black Paint
1000 PSI Internal Bidirectional Relief, No Paint
1500 PSI Internal Bidirectional Relief, Black Paint
1500 PSI Internal Bidirectional Relief, No Paint
2000 PSI Internal Bidirectional Relief, Black Paint
2000 PSI Internal Bidirectional Relief, No Paint
2000 PSI Internal Bidirectional Relief, Castle Nut, Black Paint
3000 PSI Internal Bidirectional Relief, Black Paint
3000 PSI Internal Bidirectional Relief, No Paint
4000 PSI Internal Bidirectional Relief, Black Paint
4000 PSI Internal Bidirectional Relief, No Paint
PSLGC.PM6, dg, ki
81
Hydraulics
T
G
S
E
R
I
E
S
Catalog 1510-20
Technical Information
Dimensions
Inch equivalents for metric dimensions are shown in (**)
4.8 (.19)
T
G
2 x 7/8-14 SAE
O-Ring
21.6 (.85)
This dimension
applies to both ports.
Rear View
S
E
R
I
E
S
Standard Rotation:
(As viewed from shaft end)
Front Ports - Pressurize "A" to turn Counterclockwise, "B" to turn Clockwise.
Rear Ports - Pressurize "A" to turn Clockwise, "B" to turn Counterclockwise.
4 x 13.5 (.531) On
171.42 (6.749) BC Spotface
20.3 (.80)
45
196.8 (7.75)
Front View
PSLGC.PM6, dg, ki
82
Hydraulics
Catalog 1510-20
Technical Information
Options
Features
Roller Vane Power Element - For High Volumetric Efficiency and Long Life
Corrosion Resistance
T
H
TH Specifications
Code
Displacement
0140
0170
0195
0240
0280
0335
140
(8.6)
169
(10.3)
195
(11.9)
237
(14.5)
280
(17.1)
337
(20.6)
405
(24.7)
476
(29.1)
528
442
381
314
266
221
185
bar
(psid)
206.9
(3000)
206.9
(3000)
206.9
(3000)
206.9
(3000)
206.9
(3000)
206.9
(3000)
bar
(psid)
275.9
(4000)
275.9
(4000)
275.9
(4000)
275.9
(4000)
275.9
(4000)
406.8
(3601)
494.9
(4380)
576.0
(5098)
704.9
(6239)
824.9
(7301)
541.6
(4794)
659.6
(5838)
765.6
(6776)
cc/rev
(cu in/rev)
0405
0475
0530
0625
0785
0960
529
(32.3)
624
(38.0)
786
(48.0)
958
(58.5)
157
141
120
95
78
172.4
(2500)
137.9
(2000)
137.9
(2000)
120.7
(1750)
103.4
(1500)
69.0
(1000)
275.9
(4000)
241.4
(3500)
206.9
(3000)
172.4
(2500)
155.2
(2250)
137.9
(2000)
103.4
(1500)
1006.4
(8908)
991.1
(8772)
923.4
(8173)
PSLGC.PM6, dg, ki
83
Hydraulics
S
E
R
I
E
S
Catalog 1510-20
Technical Information
Performance Data
Flange Mount
Side Load - kg (lb)
3628.8
(8000)
2721.6
(6000)
Intermittent*
1814.4
(4000)
907.2
(2000)
-25.4 0
(-1) (0)
Wheel Mount
Side Load - kg (lb)
3628.8
(8000)
2721.6
(6000)
1814.4
(4000)
T
H
S
E
R
I
E
S
907.2
(2000)
0
-25.4 0
25.4 50.8 76.2 101.6 127.0 152.4
(-1) (0)
(1)
(2)
(3)
(4)
(5)
(6)
Distance From Mounting Face - mm (in)
Multiply
3
Allowable
Radial Load
By These
2
Factors
1
0
0 2 4 6 8 10 12
Life In Millions Of Revolutions
PSLGC.PM6, dg, ki
84
Hydraulics
Catalog 1510-20
Performance Data
Code 0140
Code 0170
140 cc / rev
170 cc / rev
PRESSURE (BAR)
34.5 69.0 103.4 137.9 172.4 206.9 241.4 275.9
PRESSURE (BAR)
1.9
58.6 119.8
9
4
1.9
3.8
3.8
7.6
7.6
11.4
11.4
15.1
15.1
18.9
18.9
26.5
26.5
34.1
34.1
45.4
45.4
56.8
56.8
75.7
75.7
94.6
94.6
Flow (LPM)
TORQUE
SPEED
8.6 cu in / rev
Flow (LPM)
304.5
598
10.3 cu in / rev
PRESSURE (PSI)
.5
(nm)
(RPM)
519 1060
9
4
4000
TORQUE
SPEED
PRESSURE (PSI)
3899
12
.5
4000
5402
8
4447
12
5587
25
4608
29
5652
44
4644
52
5716
64
4701
76
5761
83
4763
123
5818
123
4794
171
5838
163
12
4794
243
12
5823
223
15
4771
314
15
5801
283
20
299
528
4692
435
20
5714
383
25
173
660
4579
555
25
239
554
5591
483
Flow (GPM)
Performance data
is typical. Actual
data may vary
slightly from one
production motor
to another.
Flow (GPM)
PSLGC.PM6, dg, ki
85
Hydraulics
T
H
S
E
R
I
E
S
Catalog 1510-20
Performance Data
Code 0195
Code 0240
195 cc / rev
240 cc / rev
PRESSURE (BAR)
34.5 69.0 103.4 137.9 172.4 206.9 241.4 275.9
1.9
82.8 169.8
7
3
1.9
3.8
3.8
7.6
7.6
11.4
11.4
15.1
15.1
18.9
18.9
26.5
26.5
34.1
34.1
45.4
45.4
56.8
56.8
75.7
75.7
94.6
94.6
Flow (LPM)
11.9 cu in / rev
TORQUE
SPEED
.5
S
E
R
I
E
S
733 1503
7
3
(nm)
(RPM)
534.3
421
Flow (LPM)
14.5 cu in / rev
PRESSURE (PSI)
500 1000 1500 2000 2500 3000 3500 4000
PRESSURE (PSI)
T
H
PRESSURE (BAR)
34.5 69.0 103.4 137.9 172.4 206.9 241.4 275.9
4000
TORQUE
SPEED
(LB IN)
(RPM)
4813
11
.5
6375
6
8037
9
6595
19
8184
20
6635
35
8234
33
6710
52
8271
47
6772
86
8298
73
6774
120
8271
100
12
6776
172
12
8224
140
15
6765
233
15
8212
180
20
6663
310
20
8081
248
25
6500
397
25
7913
317
Flow (GPM)
Performance data
is typical. Actual
data may vary
slightly from one
production motor
to another.
Flow (GPM)
PSLGC.PM6, dg, ki
86
Hydraulics
Catalog 1510-20
Performance Data
Code 0280
Code 0335
280 cc / rev
335 cc / rev
PRESSURE (BAR)
34.5 69.0 103.4 137.9 172.4 206.9 241.4 275.9
34.5
PRESSURE (BAR)
1.9
1.9
3.8
3.8
7.6
7.6
11.4
11.4
15.1
15.1
18.9
18.9
26.5
26.5
34.1
34.1
45.4
45.4
56.8
56.8
75.7
75.7
94.6
94.6
Flow (LPM)
17.1 cu in / rev
.5
TORQUE
SPEED
(nm)
(RPM)
PRESSURE (PSI)
500 1000 1500 2000 2500 3000 3500 4000
TORQUE
1056 2177 3323 4512
SPEED
5
4
2
1
770.0
286
Flow (LPM)
20.6 cu in / rev
PRESSURE (PSI)
9350
2
.5
9350
2
9400
11
9536
19
9596
30
9641
41
9706
63
9707
85
12
9652
118
12
15
9625
152
15
20
9499
209
20
25
9311
267
25
Flow (GPM)
Performance data
is typical. Actual
data may vary
slightly from one
production motor
to another.
Flow (GPM)
PSLGC.PM6, dg, ki
87
Hydraulics
T
H
S
E
R
I
E
S
Catalog 1510-20
Performance Data
Code 0405
405 cc / rev
24.7 cu in / rev
PRESSURE (PSI)
500 1000 1500 2000 2500 3000 3500
PRESSURE (BAR)
34.5 69.0 103.4 137.9 172.4 206.9 241.4
1.9
3.8
7.6
11.4
15.1
18.9
26.5
34.1
45.4
12
56.8
15
75.7
20
94.6
25
.5
Flow (GPM)
Flow (LPM)
TORQUE
SPEED
(nm)
(RPM)
TORQUE
SPEED
712.1
212
(LB IN)
(RPM)
9848
197
T
H
S
E
R
I
E
S
Performance data
is typical. Actual
data may vary
slightly from one
production motor
to another.
PSLGC.PM6, dg, ki
88
Hydraulics
Catalog 1510-20
Performance Data
Code 0475
475 cc / rev
PRESSURE (BAR)
34.5 69.0 103.4 137.9 172.4 206.9
1.9
3.8
7.6
11.4
15.1
18.9
26.5
34.1
45.4
12
56.8
15
75.7
20
94.6
25
113.6
30
.5
Flow (LPM)
Flow (GPM)
TORQUE
SPEED
(nm)
(RPM)
TORQUE
SPEED
283.0
236
(LB IN)
(RPM)
6766
230
T
H
S
E
R
I
E
S
Performance data
is typical. Actual
data may vary
slightly from one
production motor
to another.
PSLGC.PM6, dg, ki
89
Hydraulics
Catalog 1510-20
Performance Data
Code 0530
530 cc / rev
32.2 cu in / rev
PRESSURE (BAR)
34.5 69.0 103.4 137.9 172.4
PRESSURE (PSI)
500 1000 1500 2000 2500
1.9
.5
3.8
7.6
11.4
15.1
18.9
26.5
34.1
45.4
12
56.8
15
75.7
20
94.6
25
113.6
30
Flow (LPM)
Flow (GPM)
TORQUE
SPEED
(nm)
(RPM)
TORQUE
SPEED
304.8
211
(LB IN)
(RPM)
9814
197
T
H
S
E
R
I
E
S
Performance data
is typical. Actual
data may vary
slightly from one
production motor
to another.
PSLGC.PM6, dg, ki
90
Hydraulics
Catalog 1510-20
Performance Data
Code 0625
625 cc / rev
34.5
38.0 cu in /PRESSURE
rev
(PSI)
PRESSURE (BAR)
69.0 103.4 120.7 155.2
1.9
219.1 518.9
2
1
3.8
7.6
11.4
15.1
18.9
26.5
34.1
45.4
12
56.8
15
75.7
20
94.6
25
113.6
30
.5
Flow (LPM)
Flow (GPM)
TORQUE
SPEED
(nm)
(RPM)
TORQUE
SPEED
367.2
180
(LB IN)
(RPM)
7443
172
T
H
S
E
R
I
E
S
Performance data
is typical. Actual
data may vary
slightly from one
production motor
to another.
PSLGC.PM6, dg, ki
91
Hydraulics
Catalog 1510-20
Performance Data
Code 0785
785 cc / rev
48.0 cu in / rev
PRESSURE (BAR)
34.5 69.0 103.4 137.9
PRESSURE (PSI)
500 1000 1500 2000
1.9
.5
3.8
7.6
11.4
15.1
18.9
26.5
34.1
45.4
12
56.8
15
75.7
20
94.6
25
113.6
30
Flow (LPM)
Flow (GPM)
TORQUE
SPEED
(nm)
(RPM)
TORQUE
SPEED
856.6
137
T
H
S
E
R
I
E
S
Performance data
is typical. Actual
data may vary
slightly from one
production motor
to another.
PSLGC.PM6, dg, ki
92
Hydraulics
Catalog 1510-20
Performance Data
Code 0960
58.5 cu in / rev
960 ccPRESSURE
/ rev
(BAR)
34.5
PRESSURE (PSI)
500 1000 1500
69.0 103.4
1.9
.5
3.8
7.6
11.4
15.1
18.9
26.5
34.1
45.4
12
56.8
15
75.7
20
94.6
25
30
113.6
68.1
118
555.7 1036.0
117 113
Flow (GPM)
Flow (LPM)
TORQUE
SPEED
(nm)
(RPM)
TORQUE
SPEED
555.7
117
(LB IN)
(RPM)
9170
113
T
H
S
E
R
I
E
S
Performance data
is typical. Actual
data may vary
slightly from one
production motor
to another.
PSLGC.PM6, dg, ki
93
Hydraulics
Catalog 1510-20
Dimensional Data
"L2"
"L1"
Wheel Mount
Magneto Mount
Standard Rotation:
(As viewed from shaft end)
Front Ports - Pressurize "A" to turn Counterclockwise, "B" to turn Clockwise.
Rear Ports - Pressurize "A" to turn Clockwise, "B" to turn Counterclockwise.
0140
0170
0195
0240
0280
0335
0405
0475
0530
0625
0785
0960
Magneto Mount
T
H
Length "L1"
mm
(inches)
kg
Weight
(lb)
S
E
R
I
E
S
216
219
222
227
232
238
245
254
260
270
289
308
(8.50) (8.62) (8.75) (8.94) (9.12) (9.37) (9.66) (10.00) (10.25) (10.62) (11.37) (12.12)
14.7
(32.3)
14.9
15.2 15.5 15.9
(32.8) (33.4) (34.2) (35.1)
16.3
(35.9)
16.9
17.6
(37.3) (38.7)
18.3 19.0
20.6
(40.4) (41.9) (45.4)
22.3
(49.1)
Wheel Mount
Length "L1"
mm
(inches)
Weight
kg
(lb)
173
177
180
184
189
196
203
212
218
227
246
265
(6.82) (6.95) (7.07) (7.26) (7.45) (7.70) (7.99) (8.32) (8.57) (8.95) (9.70) (10.45)
16.9
(37.3)
17.2
17.4 17.8 18.2
(37.8) (38.4) (39.2) (40.1)
18.6
(40.9)
19.2
19.8
(42.3) (43.7)
20.6 21.3
22.9
(45.4) (46.9) (50.4)
24.5
(54.1)
PSLGC.PM6, dg, ki
94
Hydraulics
Catalog 1510-20
Dimensional Data
Mounting
Inch equivalents for metric dimensions are shown in (**)
22 30'
62.81 (2.473)
15.7 (.62)
2.8 (.11)
82.52 (3.249)
4 Bolt Magneto
133.4 (5.25)
45.21 (1.780)
63.83 (2.513)
39.88 (1.570)
45
35.05 (1.380)
Wheel
126.95
(4.998)
82.52
71.73
(2.824) (3.249)
25.4 (1.00)
25.4 (1.00)
Shafts
T
H
77.5
(3.05)
9.50 (.374)
2.8 (.11)
47.88 (1.885)
105.4 (4.15)
62.99 (2.480)
9.50 (.374)
50.29 (1.980)
41.83 (1.647)
41.7 (1.64)
Min Full Spline
37.757 (1.4865
38.10 (1.500)
7/8-14 UNF thd
(x 23.6 [.93] Deep)
1 1/2" Keyed
1 1/2" Taper
17T-12/24 Spline
PSLGC.PM6, dg, ki
95
Hydraulics
S
E
R
I
E
S
Catalog 1510-20
Dimensional Data
Porting
Inch equivalents for metric dimensions are shown in (**)
64.3
(2.53)
SAE O-Ring
25.40 (1.000)
7/8-14 SAE O-Ring
or
1/2" BSPF
Rear Ports
65.53 (2.580)
7/8-14 SAE O-Ring
22.86 (.900)
A
129.5
(5.10)
T
H
14.27 (.562)
65.53 (2.580)
28.58 (1.125)
22.86 (.900)
A
63.50 (2.500)
Manifold
S
E
R
I
E
S
45.72 (1.800)
31.75 (1.250)
4 x 5/16-18 UNC thd
x .50 Min Deep
96
Hydraulics
Catalog 1510-20
Ordering Information
TH
XXXX
Series
Displacement
Mounting
Porting
Code Displacement
0140
0170
0195
0240
0280
0335
0405
0475
0530
0625
0785
0960
08.6
10.3
11.9
14.5
17.1
20.6
24.7
29.1
32.3
38.0
48.0
58.5
Code
M
U
cu
cu
cu
cu
cu
cu
cu
cu
cu
cu
cu
cu
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
in/rev
Mounting
Magneto
Wheel; Standard
Code
Shaft
31
32
36
1 1/2" Tapered
1 1/2" Keyed
17 Tooth Spline
Code
A
B
E
J
M*
S
T**
XX
Porting
Code
**
Code
AAAA
AAAB
AAAC
AAFC
AAAF***
AABP***
AAAG
AAAH
AAHD
AAAJ
AAFG
AAAT*
AAFX*
AAAU*
AAGF*
AABJ****
AABK****
AABL****
AABM****
BBBA*
BBBM*
BBBG*
BBBJ*
BBBB*
BBBN*
BBBK*
BBBC*
BBBF*
BBBD*
BBBW*
FFAA
FFAB
FFAH
FFAJ
*
**
***
****
PSLGC.PM6, dg, ki
97
Hydraulics
Shaft
0
1
XXXX
Rotation
Options
Rotation
Standard
Reverse Timed Manifold
Options
Black Paint
No Paint
Double Paint
White Epoxy Paint
Castle Nut, Black Paint
Castle Nut, No Paint
Viton Seals, Black Paint
Viton Seals, No Paint
Viton Seals, White Epoxy Paint
Vespel Commutator Seal, Black Paint
Vespel Commutator Seal, No Paint
Bidirectional Shuttle (11:00**), Black Paint
Bidirectional Shuttle (11:00**), No Paint
Bidirectional Shuttle (11:00**), Castle Nut, Black Paint
Bidirectional Shuttle (11:00**), Castle Nut, No Paint
Free Running Rotorset, Black Paint
Free Running Rotorset, No Paint
Free Running Rotorset, No Commutator Seal, Black Paint
Free Running Rotorset, No Commutator Seal, No Paint
1000 PSI Internal Bidirectional Relief, Black Paint
1000 PSI Internal Bidirectional Relief, No Paint
1500 PSI Internal Bidirectional Relief, Black Paint
1500 PSI Internal Bidirectional Relief, No Paint
2000 PSI Internal Bidirectional Relief, Black Paint
2000 PSI Internal Bidirectional Relief, No Paint
2000 PSI Internal Bidirectional Relief, Castle Nut, Black Paint
3000 PSI Internal Bidirectional Relief, Black Paint
3000 PSI Internal Bidirectional Relief, No Paint
4000 PSI Internal Bidirectional Relief, Black Paint
4000 PSI Internal Bidirectional Relief, No Paint
Internal Speed Sensor, Black Paint
Internal Speed Sensor, No Paint
Internal Speed Sensor, Castle Nut, No Paint
Internal Speed Sensor, Castle Nut, Black Paint
T
H
S
E
R
I
E
S
Catalog 1510-20
Application
The Cross-Over Relief Valve is designed to provide
overload and shock protection for our LSHT motors
built with the manifold port option. Close coupling
the valve to the motor provides ideal protection and
eliminates plumbing.
Specifications
Performance Curve
Flow vs. Pressure
275.9
(4000)
Features
Fast acting differential area reliefs
Low leakage
Operation
The valve relieves oil from one side of the motor to
the other reducing shock and preventing overload.
It also reduces the possibility of cavitation.
241.4
(3500)
206.9
(3000)
172.4
(2500)
137.9
(2000)
103.4
(1500)
69.0
(1000)
T
34.5
(500)
0
(0)
Flow - LPM (GPM)
18.9
(5)
37.9
(10)
56.8
(15)
PSLGC.PM6, dg, ki
98
Hydraulics
75.7
(20)
Catalog 1510-20
Dimensions
Inch equivalents for metric dimensions are shown in (**)
47.5
(1.87)
85.3 (3.36)
Max
69.9
(2.75)
50.8
(2.00)
23.9
(.94)
8.9
(.350)
55.6
(2.19)
7.9
(.31)
28.6 (1.125)
33.3 (1.31)
45.7
(1.800)
63.5
(2.500)
79.2
(3.12)
1/4" Hollow Hex
.343 Dia Thru
.500 Dia Cbore x .37 DP
Mounting Hole
Top View
14.3 (.562)
12.57
(.495)
Dia.
2 x 9/16-18 SAE
Str thd Port
Rear View
Bottom View
34.5 (1.36)
50.8
(2.00)
Ref
15.5 (.61)
Side View
50.8
(2.00)
Rear View
Top View
Ordering Information
To order a cross-over relief valve mounted on a specific motor see the ordering information for that motor.
To order a cross-over relief valve as a field conversion or as a spare part use P/N 1894-1 (manifold mount required on motor).
Mounting bolts are available as P/N 021450 (4 required).
PSLGC.PM6, dg, ki
99
Hydraulics
Catalog 1510-20
25 43
Torque to
2 x 61-75 Nm (45-55 ft lb)
26.97 (1.062)
18.0 (.71)
Shuttle
Port CL
B
25 43'
9/16-18 Straight thd
O-Ring Port
(Shuttle Port)
PSLGC.PM6, dg, ki
100
Hydraulics
Catalog 1510-20
Speed Sensor
Features
2
N/C
1
+
3
-
4
Output
= Resistor Value
(K - Ohms)
+ 4.5 to 24 VDC
Pin # 4
Output
Pin # 3
- Negative
Pin # 2
No Connection
SENSOR
On State Current: 5 mA
Higher wattage resistor will be needed for higher
sink current.
+V Off State
Pin # 1
PSLGC.PM6, dg, ki
101
Hydraulics
Catalog 1510-20
Installation/Operation Information
Fluid
Installation Recommendations
Pressure
Operating the motor in its intermittent pressure
range will shorten the life of the motor and should
generally be restricted to 10% or less per minute.
The reduced life resulting from continuous operation
in the intermittent range may be acceptable in some
applications. Consult the factory for details.
Castle Nut
All motors ordered with Tapered shafts are equipped
with patch locking nuts. If desired, a castle nut may
be specified.
Shaft Loading
Use of one inch and 25mm shafts are not recommended when torque loads exceed 3500 lb. in. For
the Corrosion Resistant Shaft "N" option limit torque
to 1300 lb. in. For 7/8 inch splined shafts limit
torque to 1250 lb. in. Maximum thrust load on the
shaft should not exceed 1000 pounds inward of
outward.
Paint
Unless specified otherwise, motors are shipped
unpainted and coated with a rust inhibitor. Paint
options are:
Single coat of black paint
Double coat of black paint for increased corrosion
resistance
Multi-layered coating of white FDA approved
epoxy for superior corrosion resistance
Performance Data
Performance data shown in this catalog is the result
of testing performed using 10W40 oil at 54 C
(130 F), 200 SUS. Actual performance will vary
with fluid conditions. Lower viscosity will produce
lower performance.
Inlet Conditions
Positive pressure must be available at the motor
inlet while it is rotating. If an overrunning load
causes the motor to rotate faster than the pump can
fill it, cavitation will occur. Consult the factory for
inlet pressure requirements and speed limitations.
PSLGC.PM6, dg, ki
102
Hydraulics
Catalog 1510-20
Engineering Data
Hydraulic Formulas
Side Load
Side loads are imposed upon the shaft of a motor
by:
QP
HP in = 1714
NT
HP out = 63025
T=
D Pem
2
DN
Q = 231 e
v
Where
HP
Q
P
P
T
D
=
=
=
=
=
=
N =
em =
ev =
Horsepower
Flow, GPM
Pressure, PSI
Pressure differential across the motor
Torque, lb in
Motor displacement, cubic inches per
revolution
Shaft Speed, RPM
Mechanical efficiency
Volumetric efficiency
To Convert
Into
Into
To Convert
bars
BTU/min
BTU/min
centigrade
centimeters
cu. cms.
cu. cms.
cu. inches
cu. inches
feet
gallons
gallons
horsepower
inches
kilograms
pounds
pound-inches
pound-inches
radians
square inches
pounds/sq.in.
horsepower
kilowatts
fahrenheit
inches
cu. inches
liters
cu.cms.
liters
meters
cu. inches
liters
kilowatts
millimeters
pounds
newtons
newton-meters
daNM
degrees
sq. cms.
Multiply By
Divide By
14.5
.02356
.01757
(Cx9/5)+32
.3937
.06102
.001
16.39
.01639
.3048
231
3.785
.7457
25.4
2.205
4.448
.113
.0113
57.3
6.452
(SL)2 = W2 + (T/R)2
Side Load(lb) =
W 2 + (T/R)2
Warning
This Catalog is not a Controlled Document. All
Dimensions listed herein are for reference only.
Consult a Sales engineer for detailed information.
PSLGC.PM6, dg, ki
103
Hydraulics
Catalog 1510-20
Engineering Data
Vehicle Propulsion Systems
Hydraulic motors are often used to drive off-highway vehicles, either directly or through gear reducers. The
power required to propel the vehicle, called "Tractive Effort," is supplied by the hydraulic motor(s). It is normally
expressed in pounds and is the sum of the forces below:
TE = (RR+GR+F+DP) x 1.1
Where:
RR
GR
F
=
=
=
Rolling Resistance
Grade Resistance
Acceleration Force
DP
Drawbar Pull
Definitions
where:
Surface
Type
Surface
Condition
R
Value
Concrete
Concrete
Excellent
Good
0.010 lb.
0.015 lb.
Concrete
Asphalt
Poor
Good
0.020 lb.
0.012 lb.
Asphalt
Fair
0.017 lb.
Asphalt
Macadam
Poor
Good
0.022 lb.
0.015 lb.
Macadam
Macadam
Fair
Poor
0.022 lb.
0.037 lb.
Cobbles
Ordinary
0.055 lb.
Cobbles
Snow
Poor
2 In.
0.085 lb.
0.025 lb.
Snow
Dirt
4 In.
Smooth
0.037 lb.
0.025 lb.
Dirt
Sandy
0.037 lb.
Mud
Sand
Level/Soft
Sand
Dune
PSLGC.PM6, dg, ki
104
Hydraulics
Catalog 1510-20
Engineering Data
Grade Resistance (GR)
where:
Drawbar Pull is the force a vehicle can exert on a
load in addition to the force required to propel
itself.
GVW =
Grade (%)
Actual force to tow or push a load can be calculated based upon Rolling Resistance, Accelerating Force and Grade Resistance of towed or
pushed load.
The following table gives the approximate relationship between grade in percent and slope in
degrees.
Grade (Percent)
Motor Torque
The total Tractive effort required to propel a
vehicle is the sum of the forces due to Rolling
Resistance, Grade Resistance, Acceleration and
Drawbar Pull plus 10% for friction and other
variables:
Slope (Degrees)
1%
0 35'
2%
5%
2 51'
9'
6%
3 26'
8%
4 35'
10%
5 43'
12%
6 54'
15%
8 31'
20%
11 19'
T =
GxN
where:
25%
14
32%
18
3'
60%
31
TE = Tractive Effort
F=
TE x r
where
PSLGC.PM6, dg, ki
105
Hydraulics
Catalog 1510-20
Engineering Data
Hydraulic Motor Speed
Slip Torque
Slip torque is the torque at the motor shaft
that will cause the wheels or tracks to break
traction and skid. It is affected by the weight
of the vehicle and the coefficient of friction
between the wheels or tracks and the surface.
ST =
VW x u x r
GxN
168 x V x G
S =
where:
ST =
VW =
where:
The chart below will estimate the wheel RPM -vsvehicle velocity for various rolling radii.
6"R
RPM
600
8"R
500
10"R
Rolling Radius
400
12"R
300
14"R
16"R
18"R
20"R
200
100
10
15
20
25
MPH
PSLGC.PM6, dg, ki
106
Hydraulics
Catalog 1510-20
PSLGC.PM6, dg, ki
107
Hydraulics
Catalog 1510-20
Offer of Sale
The items described in this document and other documents or descriptions provided by Parker Hannifin Corporation, its subsidiaries and its authorized distributors are hereby offered for sale at prices to be established by Parker Hannifin Corporation, its subsidiaries and its authorized distributors. This offer and its
acceptance by any customer (Buyer) shall be governed by all of the following Terms and Conditions. Buyers order for any such item, when communicated to
Parker Hannifin Corporation, its subsidiary or an authorized distributor (Seller) verbally or in writing, shall constitute acceptance of this offer.
1. Terms and Conditions of Sale: All descriptions, quotations,
proposals, offers, acknowledgments, acceptances and sales of Sellers
products are subject to and shall be governed exclusively by the terms
and conditions stated herein. Buyers acceptance of any offer to sell is
limited to these terms and conditions. Any terms or conditions in
addition to, or inconsistent with those stated herein, proposed by Buyer
in any acceptance of an offer by Seller, are hereby objected to. No
such additional, different or inconsistent terms and conditions shall
become part of the contract between Buyer and Seller unless expressly
accepted in writing by Seller. Sellers acceptance of any offer to
purchase by Buyer is expressly conditional upon Buyers assent to all
the terms and conditions stated herein, including any terms in addition
to, or inconsistent with those contained in Buyers offer. Acceptance of
Sellers products shall in all events constitute such assent.
2. Payment: Payment shall be made by Buyer net 30 days from the
date of delivery of the items purchased hereunder. Amounts not timely
paid shall bear interest at the maximum rate permitted by law for each
month or portion thereof that the Buyer is late in making payment. Any
claims by Buyer for omissions or shortages in a shipment shall be
waived unless Seller receives notice thereof within 30 days after
Buyers receipt of the shipment.
3. Delivery: Unless otherwise provided on the face hereof, delivery
shall be made F.O.B. Sellers plant. Regardless of the method of
delivery, however, risk of loss shall pass to Buyer upon Sellers delivery
to a carrier. Any delivery dates shown are approximate only and Seller
shall have no liability for any delays in delivery.
4. Warranty: Seller warrants that the items sold hereunder shall be
free from defects in material or workmanship for a period of 5 years
from date of shipment from Parker Hannifin Corporation. THIS
WARRANTY COMPROMISES THE SOLE AND ENTIRE WARRANTY PERTAINING TO ITEMS PROVIDED HEREUNDER.
SELLER MAKES NO OTHER WARRANTY, GUARANTEE, OR
REPRESENTATION OF ANY KIND WHATSOEVER. ALL OTHER
WARRANTIES, INCLUDING BUT NOT LIMITED TO, MERCHANTABILITY AND FITNESS FOR PURPOSE, WHETHER EXPRESS,
IMPLIED, OR ARISING BY OPERATION OF LAW. TRADE USAGE,
OR COURSE OF DEALING ARE HEREBY DISCLAIMED. NOTWITHSTANDING THE FOREGOING, THERE ARE NO WARRANTIES WHATSOEVER ON ITEMS BUILT OR ACQUIRED WHOLLY
OR PARTIALLY, TO BUYERS DESIGNS OR SPECIFICATIONS.
5. Limitation of Remedy: SELLERS LIABILITY ARISING FROM
OR IN ANY WAY CONNECTED WITH THE ITEMS SOLD OR THIS
CONTRACT SHALL BE LIMITED EXCLUSIVELY TO REPAIR OR
REPLACEMENT OF THE ITEMS SOLD OR REFUND OF THE
PURCHASE PRICE PAID BY BUYER, AT SELLERS SOLE
OPTION. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY
INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES OF ANY
KIND OR NATURE WHATSOEVER. INCLUDING BUT NOT
LIMITED TO LOST PROFITS ARISING FROM OR IN ANY WAY
CONNECTED WITH THIS AGREEMENT OR ITEMS SOLD HEREUNDER, WHETHER ALLEGED TO ARISE FROM BREACH OF
CONTRACT, EXPRESS OR IMPLIED WARRANTY, OR IN TORT,
INCLUDING WITHOUT LIMITATION, NEGLIGENCE, FAILURE TO
WARN OR STRICT LIABILITY.
6. Changes, Reschedules and Cancellations: Buyer may request to
modify the designs or specification for items sold hereunder as well as
the quantities and delivery dates thereof, or may request to cancel all or
part of this order, however, no such requested modification or
cancellation shall become part of the contract between buyer and Seller
unless accepted by Seller in written amendment to this Agreement.
Acceptance of any such requested modification or cancellation shall be
at Sellers discretion, and shall be upon such terms and conditions as
Seller may require.
7. Special Tooling: A tooling charge may be imposed for any special
tooling, including without limitation, dies, fixtures, molds and patterns,
acquired to manufacture items sold pursuant to this contract. Such
special tooling shall be and remain Sellers property notwithstanding
payment of any charges by Buyer, in no event will Buyer acquire any
interest in apparatus belonging to Seller which is utilized in the
manufacture of the items sold hereunder, even if such apparatus has
been specially converted or adapted for such manufacture and
notwithstanding any charges paid by Buyer. Unless otherwise agreed,
Seller shall have the right to alter, discard or otherwise dispose of any
special tooling or other property in its sole discretion at any time.
8. Buyers Property: Any designs, tools, patterns, materials, drawings.
Confidential information or equipment furnished by buyer, or any other
items which become Buyers property, may be considered obsolete and
may be destroyed by Seller after two (2) consecutive years have
elapsed without Buyer placing an order for the items which are
manufactured using such property. Seller shall not be responsible for
any loss or damage to such property while it is in Sellers possession or
control.
9. Taxes: Unless otherwise indicated on the face hereof, all prices and
charges are exclusive of excise, sales, use, property, occupational or
like taxes which may be imposed by any taxing authority upon the
manufacture, sale or delivery of the items sold hereunder. If any such
taxes must be paid by Seller or if Seller is liable for the collection of
such tax, the amount hereof shall be in addition to amounts for the
items sold. Buyer agrees to pay all such taxes or to reimburse Seller
therefore upon receipt of its invoice. If Buyer claims exemption from
any sales, use or other tax imposed by any taxing authority, Buyer shall
save Seller harmless from and against any such tax together with any
interest or penalties thereon which may be assessed if the items are
held to be taxable.
10. Indemnity For Infringement of Intellectual Property Rights:
Seller shall have no liability for infringement of any patents, trademarks,
copyrights, trade dress, trade secrets or similar rights except as
provided in this Part 10. Seller will defend and indemnify Buyer against
allegations of infringement of U.S. Patents, U.S. Trademarks, copyrights, trade dress and trade secrets (hereinafter Intellectual Property
Rights). Seller will defend at its expense and will pay the cost of any
settlement or damages awarded in an action brought against Buyer
based on an allegation that an item sold pursuant to this contract
infringes the Intellectual Property Rights of a third party. Sellers
obligation to defend and indemnify Buyer is contingent on Buyer
notifying Seller within ten (10) days after Buyer becomes aware of such
allegations of infringement, and Seller having sole control over the
defense of any allegations or actions including all negotiations for
settlement or compromise. If an item sold hereunder is subject to a
claim that it infringes the Intellectual Property Rights of a third party,
Seller may, at its sole expense and option, procure for Buyer the right to
continue using said item, replace or modify said item so as to make it
noninfringing, or offer to accept return of said item and return the
purchase price less a reasonable allowance for depreciation. Notwithstanding the foregoing, Seller shall have no liability for claims of
infringement based on information provided by Buyer, or directed to
items delivered hereunder for which the designs are specified in whole
or part by Buyer, or infringements resulting from the modification,
combination or use in a system of any item sold hereunder. The
foregoing provisions of this Part 10 shall constitute Sellers sole and
exclusive liability and buyers sole and exclusive remedy for infringement of Intellectual Property Rights. If a claim is based on information
provided by Buyer or if the design for an item delivered hereunder is
specified in whole or in part by Buyer, buyer shall defend and indemnify
Seller for all costs, expenses of or judgments resulting from any claim
that such item infringes any patent, trademark, copyright, trade dress,
trade secret or any similar right.
11. Force Majeure: Seller does not assume the risk of and shall not be
liable for delay or failure to perform any of Sellers obligations by reason
of circumstances beyond the reasonable control of Seller (hereinafter
Events of Force Majeure). Events of Force Majeure shall include
without limitation, accidents, acts of god, strikes or labor disputes, acts,
laws, rules or regulations of any government or government agency,
fires, floods, delays or failures in delivery of carries or suppliers,
shortages of materials and any other cause beyond Sellers control.
12. Entire Agreement/Governing Law: The terms and conditions set
forth herein, together with any amendments, modifications and any
different terms or conditions expressly accepted by Seller in writing,
shall constitute the entire Agreement concerning the items sold, and
there are no oral or other representation or agreements which pertain
thereto. This Agreement shall be governed in all respects by the law of
the State of Ohio. No actions arising out of the sale of the items sold
hereunder or this Agreement may be brought by either party more than
two (2) years after the cause of action accrues.
PSLGC.PM6, dg, ki
108
Hydraulics
Parkers Charter
To be a leading worldwide manufacturer of components and systems for the builders and users of
durable goods. More specifically, we will design,
market and manufacture products controlling motion, flow and pressure. We will achieve profitable
growth through premier customer service.
Product Information
North American customers seeking product information, the location of a nearby distributor, or
repair services will receive prompt attention by
calling the Parker Product Information Center at
our toll-free number: 1-800-C-PARKER (1-800272-7537). In the UK, a similar service is
available by calling 0500-103-203.
Hydraulics