Summary of BR - Quantity (Original Estimate)

Summary of Estimate for construction of Bridge No.
141/1,141/2 & 142/1 on NH 37

Ref : Based on Tender Rate
Item
No.
1
1/12.10
Particulars/Description of item
2
Total
Total
Quantity Quantity
Unit
Br.NoBr.No141/1
141/2
3
4
Total
Quantity
Br.No142/1
Total
Quantity
Rate in
Rs.
In
Figures
5
Excavation for Structures (Earth

work in excavation of foundation of
structures as per drawing and
technical specification, including
setting out, construction of shorting
and bracing, removal of stumps and
other deleterious metter, dressing of
sides and bottom and backfilling
with approved material. as per
MOSRT Clause No. 304
(I) Ordenary Soil
A. Manual means
i) Upto 3m depth (with dewatering ) Cum
ii) 3m to 6m depth (with
Cum 2278.204 2727.917
dewatering
) depth (with dewatering
iii)
Above 6m
2/12.8 )Plain/Reinforced cement concrete in
open foundation complete as per
220.14
drawing and tachnical specification Cum 165.83
(A) PCC Grade M15
2/12.39 Levelling course for pile capas per
drawing and tachnical specification
Cum
MORTH no. 1100,& 1700
3/12.38 Cement concrete for Reinforced
concrete in pile cap complete as per
drawing and technical specifications
of MORTH Clouse No. 1100,1600
& 1700 as per specification and
direction of engineer in charge.
Cum
Pile Cap
I) RCC M-35 grade
Case I : Using Concrete mixer
568.620
5574.741
70.00
385.971
3785.00
26.24
26.244
4206.00
291.92
291.924
4880.00
506.00
506.000
10924.00
971.472
4826.00
4/12.25 Bored cast-in-situ M35 Grade RCC

pile
excluding
reinforcement
complete as per drawing and
technical specification cl. No. 1100 &
1700 and removal of excavated
earth with all lifts and lead upto
1000m.as per specification and
direction of engineer in charge.
(Pile Dia= 1200mm)
3/12.8
Metre
Open Foundation
Plain/Reinforced cement concrete in
open foundation complete as per
H. RCC Grade M 35
Cum
Case I-Using Concrete Mixer
418.90
552.57
4/12.40 Supplying, fitting and placing uncoated TMT CRS (Fe-500) bar
reinforcment in foundationcomplete
as per drawing and technical
specification
49.30
80.35
65.61
195.263
46725.00
666.678
6276.00
138.762
46779.00
879.378
3193.00
283.10
650.650
283.100
6724.00
6993.00
5/13.5
Plain/Reinforced cement concrete in
Sub-Structure complete as per
nO. 1500, 1700,& 2200 including
providing plasticiser(Masterplast PL1)/ equvalent, air entraining and
water
reducing
plasticiser
(Masterplast
PAE)/equvalent
conforming to IS-9103-1999 and as
per specification and direction of
Engineer in charge and steel
shuttering formwork.
q) RCC Grade M35
I) High 5m to 10m
Case I : Using Concrete mixer
6/13.6(A)
Cum 227.9422 279.6806 159.0556
Supplying, fitting and placing uncoated TMT CRS (Fe-500) bar

reinforcment
in
sub-structure MT
technical specification
45.67
55.40
377.748
501.63
278.85
371.80
37.70
7/12.4
PCC 1:3:6 in foundation (Plain
cement concrete 1:3:6 nominal mix
in foundation with crushed stone
aggregate 40mm nominal size Cum
mechanically mixed, placced in
foundation and compected by
vibration including curing for 14
days)
8/14.1 (B)
Furnishing
and
placing
Reinforced/Prestressed
cement
concrete in super structure as per
drawing and technical specification'
including
providing
plasticiser
(Masterplast PL-1), air entraining
and water reducing plasticiser
(Masterplast PAE) conforming to IS9103-1999 and as per specification
and direction of Engineer in charge.
B. RCC Grade M-25
Case I : Using concrete mixer
For solid slab Super Structure
1) Hight upto 5m
Cum
2) Hight 5m to 10m
Cum
3) Hight above 10m
E. RCC Grade M-40 (for Crash
Barrier)
Case I: Using concrete Mixer
For T-beam & slab,
Cum
2) Hight 5m to 10m
9/14.2 (a) (a) Supplying, fitting and placing

TMT CRS (Fe-500) bar reinforcment
in Super-structure including splicing
technical specification
(a) TATA/SAIL
17.89
22.62
14.74
55.251
7384.00
25.94
34.28
48.09
108.305
48991.00
10/Ana
Bituminous
wearing
coat:Providing
Bituminous
wearing
course comprising of tack coat with
bitumen emulsion as per APWD
SOR item No. 5.2 & MOSRT&H
specification no. 503;6mm thick
mastic Asphalt as per APWD SOR
ITEM NO. 14.5 & MOSRT&H Sqm
specification no. 515&2702 and 2
layers of 25mm thick Asphaltic
concrete consisting of close graded
premix surfacing (CGPS) materials
with type-a aggregates as per
APWD SOR (item no. 5.11 &
MOSRT&H specification no. 512,
including all lead & lift complete as
directed.
390.39
493.50
51.60
421.74
1305.630
409.00
64.50
116.100
949.00
51.60
64.50
116.100
266.00
51.60
64.50
116.100
241.00
(IV) providing and filling joint sealing

compound as per drawing and Rm
technical specifications with coarse
sand and 6% bitumen by weight.
51.60
64.50
116.100
10.00
Back Filling behind abutment, wing

wall and retirn wall complete as per
drawing and clause no 2607 of Cum
MoSRT&H Specification
(A) Granular Material
476.01
476.01
710.40
1662.420
897.00
26.57
26.57
25.56
78.696
4372.00
34.00
34.00
36.00
104.000
90.00
11/14.18
Filler joint: (I) Providing & fixing
2mm thick corrugated copper plate Rm
in expansion joint complete as per
drawing and technical specifications.
(II) Providing & fixing 20mm thick
compressible
fiber
board
in Rm
expansion joint complete as per
drawing and technical specifications.
(III) Providing & fixing 20mm thick
premoulded joint filler in expantion
joint for fixed ends of simply
supported spans not exceeding 10m Rm
to cater for a horizontal movenent
upto 20mm, covered with sealant
technical specifications.
12/13.9
13/14.10
Pcc M 15 Grade leveling course
below approch slab complete Cum
including all accessories as per
as per MOSRTH section 2700
14/13.8 Providing weep holes in brick
masorny/plain/Reinforced concrete
abutment, wing wall/return wall with
100m dia AC pipe, extending
through the full width of the structure
with slope of 1V:20H towards Nos
drrawing force, complete as per
approved drawing and technical
specification clause 2706 & 2200 of
MORTH Specification.
15/14.9 Providing
Drainage
Spouts
technical specifications clauses
2705 of MORTH specification of Nos
Roads and Bridge Works for
superstructure works.
6.00
8.00
8.00
22.000
6445.00
16/14.11 RCC approch slab including

reinforcement
and
formwork
technical specifications clauses
1500, 1600, 1700 & 2704 of Cum
MORTH specification of Roads and
Bridge Works for superstructure
works.
26.57
26.568
12.78
65.916
8,513.00
241.67
305.50
147.94
695.106
28.00
152.559
203.38
355.937
1029.00
1019.000
300.00
17/14.16 Painting on Concrete surface

(Proving and applying 2 coats of
water based cement paint to
unplastered concrete surface after
cleaning the surface of dirt, dust, oil, Sqm
grease, enfflorescence and applying
paint @ of 1 liter for 2 sq.m.)
23/15.1 Providing and laying boulders
apron on river bed for protection
against scour with stone boulders
weighting not less than 40kg each
complete as per drawing and Sqm
technical specification.
(A) Boulder laid dry without wire
crates.
6/12.37 Pile load test on single vertical pile
in accordience with IS: 219 (part-IV)
as per and technical specification of
MT
MORTH section no 1100.
(a) Initial and Routine load test
9/13.14
Supplying, fitting and fixing in

position true to line and level
elastomeric bearing conforming to
IRC: 83(pt- III) section IX and clause
2005 of MoHRT specifications Cm.
complete including all accessories
as per drawing and technical
specification as per MORTH section
2000,2200.
1019.00
215040.00 215040.000
0.82
13/14.22
Providing and laying of a Strip Seal
Expansion Joint catering to
maximum horizontal movement upto
70mm, complete as per approved metre
clause No 2607to be installed by the
manufacturer/supplier
or
their
authorised representative ensuring
compliance to the manufacturers
inrtructions for installation
29.60
29.600
11103.00
14/14.6 Construction of pre cast RCC

railling of M30 grade, aggregate
size not exceeding 12 mm, true line
and grade, tolerance of vertical RCC
post not to exceed 1 in 500 center to
center spacing between vertical post
not to exceed 2000mm leaving
adequate space between vertical
post for expansion, Complete as per Rm
clauses of section 2703, 1500, 1600
& 1700 of MoSRT&H specification of
Roads and Bridge Works for
superstructure works.
62.48
62.480
1391.00
61.28
229.640
1475.00
26/Anna Hand Rail
Providing and fixing hand rail over the

crash barrier consisting of MS base
plate, embeded fastener and nuts, MS
vertical plates and pipe etc. as shown in
the drawing and as per specifications, All
the railing components as mantioned
above to be hot dip galvanished with a
zinc coating of atleast 175gm/sqm the
thickness the plates to be as shown in
the drawings and pipe to be 65NB heavy
class with a weight not less than Rm
7.29Kg/m and conforming to IS: 11611979. Item to include all incidental works
required to complete the work as
directed by the Engineer-in-charge.
Management shall be made for the
length of the pipe only
74.36
94.000
Total
Executive Engineer, PWD

Guwahati NH Division, Guwahati
on NH 37
Amount
6
390231.85
1460898.82
110382.26
1424589.12
5527544.00
4688323.87
9123664.42
4184072.95
6491135.88
2807853.95
4374970.60
1979718.30
407976.22
5305958.50
534002.67
110178.90
30882.60
27980.10
1161.00
1491190.74
344058.91
9360.00
141790.00
561142.91
19462.97
366258.66
305700.00
176332.80
328648.80
PWD
Guwahati
86909.68
338719.00
53151100.48
3013816
56164916.48

Summary of BR - Quantity (Original Estimate)

Uploaded by

Copyright:

Available Formats

Summary of BR - Quantity (Original Estimate)

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Summary of BR - Quantity (Original Estimate)

Uploaded by

Copyright:

Available Formats

Summary of Estimate for construction of Bridge No.

141/1,141/2 & 142/1 on NH 37

Excavation for Structures (Earth

4/12.25 Bored cast-in-situ M35 Grade RCC

Cum 227.9422 279.6806 159.0556

Supplying, fitting and placing uncoated TMT CRS (Fe-500) bar

9/14.2 (a) (a) Supplying, fitting and placing

(IV) providing and filling joint sealing

Back Filling behind abutment, wing

16/14.11 RCC approch slab including

17/14.16 Painting on Concrete surface

Supplying, fitting and fixing in

14/14.6 Construction of pre cast RCC

26/Anna Hand Rail

Providing and fixing hand rail over the

Executive Engineer, PWD

You might also like