Process Control Presys

R
Instrumentos e Sistemas
EMENT SYS
AG
Calibrao
NBR ISO/IEC
17025
QUA ITY
L
CAL 0193
M
TE
PRESYS
Rua Luiz da Costa Ramos, 260

So Paulo - SP - 04157-020
Tel: (11) 3056.1900
Fax: (11) 5073.3366
http://www.presyscorp.com
E-mail: vendas@presys.com.br
MA
N
Instrumentation and
Process Control
OCP 0004
EF-0241-01
presys
TABLE OF CONTENTS
page
INDICATORS
Digital Multi-point Indicator - DMY-2015 / DMY-2015-PB (Profibus)
02
Universal Digital Indicator - Single - DMY-2030-Light
04
Frequency Digital Indicator - Single - DMY-2030-F-Light
06
Universal Process Indicator - Dual - DMY-2030 / DMY-2030-F / DMY-2011 / DMY-2011-F / DMY-2035 /

DMY-2035-F / DMY-2036 / DMY-2036-F
08
Process Indicator and Totalizer - Single - DMY-2030-TOT-Light / DMY-2030-TOT-F-Light
10
Process Indicator and Totalizer - Dual - DMY-2030-TOT / DMY-2030-TOT-F
11
Process Counter - Dual - DMY-2030-TOT-FCS / DMY-2031-FCS
12
Universal Process Indicator (Large Digits) - DMY-2032 / DMY-2032-F
14
Digital Indicator for Load Cell - DMY-2030-CC
15
Flow Calculator - DMY-2030-CV
16
Pressure Indicator - Single or Dual - DMY-2017-Light / DMY-2017
18
CONTROLLERS
Universal Process Controllers - Single Loop - DCY-2050-Light / DCY-2050-F-Light / DCY-2051-Light /
DCY-2051-F-Light / DCY-2060-Light / DCY-2060-F-Light
20
Universal Process Controllers - Dual Loop - DCY-2050 / DCY-2050-F / DCY-2051 / DCY-2051-F /

DCY-2060 / DCY-2060-F / DCY-2055
22
3 Elements Digital Controller for Boiler Level - DCY-2050-LC / DCY-2051-LC / DCY-2060-LC
24
Auto/Manual Station - DCY-2058 / DCY-2059
25
Pressure Controller - DCY-2057
26
TRANSMITTERS / CONVERTERS
Universal Smart Transmitter - TY-2090 / TY-2090-F
28
Pressure to Current Converter (P/I) - TY-1110-DIN
30
Eletropneumatic Converter (I/P) Weather-proof - TY-1125-TEM
31
VIRTUAL RECORDER / DATA LOGGER

Virtual Recorder VR-2000 - 3.3
32
Multi-Loop Data-Logger Module - DMY-2015-DLY / TY-2095-DLY
34
Data Acquisition
Data Acquisition Module - TY-2095 / TY-2095-PB (Profibus)
36
ACCESSORIES / DIMENSIONALS
Internal Optional Modules / Configurators
38
Explosion-proof Panel
40
Dimensional Drawings
42
HART CONFIGURATOR
HART Field Communicator - FCY-15
46
presys
Digital Multi-point
Indicator
DMY-2015 and
DMY-2015-PB
Models available for:

- 12 THERMOCOUPLE INPUTS.
- 8 RTD INPUTS.
- 12 CURRENT INPUTS 4-20 mA.
- 12 VOLTAGE INPUTS 1-5 Vdc.

- COMBINATION OF 2 INPUT TYPES.
Totalization function.
Many optional Modules are available:
- Up to 2 SPDT relays alarm modules.
- One retransmitter output 1-5 Vdc, 4-20 mA
or 0-10 Vdc, which can retransmit any input signal or the
mean of selected channels configuration. (item upon request).
- Galvanic isolation between inputs, outputs and power supply.
- Isolation between inputs is also available upon request.
- RS-232, RS-422/485 Communication (MODBUS RTU Protocol) or PROFIBUS (DP-V0)*.
- Aspersion-proof front-panel.
Configurable display for up to 4-digit of high visibility for the process variable indication. Another
display shows which channel is being displayed. Still has twelve LEDs that may indicate alarm
states for each channel.
*Only available for DMY-2015-PB model.

2
presys
Order Code
Model
DMY-2015
DMY-2015-PB
Inputs
0 - 12 TC inputs
1 - 8 RTD inputs
2 - 6 TC and 4 RTD inputs
3 - 12 current inputs
4 - 12 voltage inputs
5 - 6 TC and 6 current inputs
6 - 6 TC and 6 voltage inputs
7 - 6 current and 6 voltage inputs
8 - 6 current and 4 RTD inputs
9 - 6 voltage and 4 RTD inputs
Output 1
0 - None
1 - SPDT Relay
2 - Open Collector Voltage
3 - Solid State Relay
Output 2
Same code as output 1
Power Supply
1 - 75 to 264 Vac 50/60 Hz or 100 to 360 Vdc (any polarity)
2 - 24 Vac or 24 Vdc (10 %)
3 - 12 Vdc (10 %)
4 - Others, upon request
Communication
0 - None
1 - MODBUS (RS-232)*
4 - PROFIBUS DP-V0 (RS-485)**
Case Protection Grade

0 - General usage, protected place
1 - Front aspersion-proof
2 - Weather-proof - IP 66
3 - Explosion-proof (EX d IIB T6 Gb IP 66), horizontal display***
Specifications
Inputs
Thermocouple (J, K, T, E, R, S under ITS-90).
RTD Pt-100 under DIN 43760.
4-20 mA with input impedance of 250 .
1 to 5 Vdc with input impedance >10 M.
Outputs
Up to 2 SPDT relays rated for 3A/220 Vac.
Logic signal, open collector transistor, 24 Vdc/40 mA
maximum with isolation. Solid state relay,
2A/250 Vac with isolation.
Serial Communication
DMY-2015: RS-232 or RS-422/485 with 50 Vdc isolation.
MODBUS-RTU Communication Protocol.
DMY-2015-PB: PROFIBUS DP-V0: RS-485 Communication.
Indication
4-digit red leds display (14 mm) for process variable indication.
2-digit display for channel indication. 12 red leds for alarm
indication.
Totalization
Totalization of eight voltage or current inputs ranging from
0 to 9999, configured with the decimal point.
Configuration
By front-panel push-buttons
Sampling Rate
480 ms standard, for all inputs. One second display update rate.
Accuracy
0.1 % of full scale for TC, RTD, mA, Vdc.
Linearization
0.1 C for RTD and 0.2 C for TC.
Square Root Extraction
0.5 % of reading, for input above 10 % of span.
Programmable Cut-off from 0 to 5 %.
Cold Junction Compensation
2.0 C in ambient temperature range from 0 to 60 C.
Span Temperature Coefficient
0.005 % of span / C using 25 C as the reference temperature.
Power Supply
75 to 264 Vac 50/60 Hz or 100 to 360 Vdc
(10 W nominal); 24 Vac/dc (10 %); 12 Vdc (10 %).
Operating Range
0 to 60 C temperature and 90 % maximum relative humidity.
Dimensions
1/4 DIN (96 x 96 x 187 mm) HxWxD, (92 x 92 mm) HxW panel
cutout.
Weight
0.7 kg nominal.
Warranty
One year.
* Available only for DMY-2015 model

** Available only for DMY-2015-PB model
*** Explosion-proof box:
Dimensions
310 x 310 x 200 mm (HxWxD)
Weight
11 kg approx.
presys
Universal Digital
Indicator Single
DMY-2030-Light
DMY-2030-Light: Universal input for RTD, thermocouples, 0-55 mV, 4-20 mA,
1-5 Vdc and 0-10 Vdc.
4 digit display of high visibility.
Linearization for RTD and TC, square root extraction function.
Power supply of 75-264 Vac, 50/60 Hz or 100 to 360 Vdc; 24 Vac/dc and 12 Vdc,
as ordered.
Fully configurable by front-panel push-buttons. Configuration stored in non-volatile memory.
Many optional modules are available:
- Analog output modules of 4-20 mA, 1-5 Vdc and 0-10 Vdc.
- Up to 2 SPDT relay alarm modules.
- Communication RS-232 or RS-422/485 with computer.
High accuracy.
presys
Order Code
DMY
Model
2030-Light
Output 1
0
1
2
3
None
4-20 mA
1-5 Vdc
0-10 Vdc
Output 2
0
1
2
3
None
SPDT Relay
Open Collector Voltage
Solid State Relay
Output 3
Same code as Output 2
Power Supply
1 - 75 to 264 Vac 50/60 Hz or 100 to 360 Vdc (any
polarity)
2 - 24 Vac or 24 Vdc (10 %)
3 - 12 Vdc (10 %)
Communication
0
1
2
3
None
RS-232
RS-485
RS-422

1 - Front Aspersion-proof
3 - Explosion-proof (Ex d IIB T6 Gb IP 66), horizontal display*
* Explosion-proof box:
Dimensions
310 x 310 x 200 mm (HxWxD)
Weight
11 kg approx.
Specifications
Inputs
Configurable for TC (J, K, T, E, R, S under ITS-90), 0-55 mV,
RTD under DIN 43760, 4-20 mA, 1-5 Vdc and 0-10 Vdc.
Input impedance of 250 for mA, >10 M up to 5 Vdc and
2 M above 5 Vdc.
Outputs
4-20 mA (750 maximum load), 1-5 Vdc or 0-10 Vdc analog
retransmitter. Galvanically isolated module to 300 Vac from power
supply and inputs. Up to 2 SPDT relay modules, rated for 3A/220 Vac.
Logic signal, open collector transistor, 24 Vdc/40 mA maximum with
isolation. Solid state relay, 2A/250 Vac with isolation.
RS-232 or RS-422/485 with 50 Vdc isolation. MODBUS-RTU
Communication Protocol.
Indication
4 digit red leds display (14 mm).
Configuration
By front-panel push-buttons and internal jumpers.
Sampling Rate
64 ms standard.
Accuracy
0.1 % of full scale for TC, RTD, mA, mV and Vdc inputs.
0.5 % of full scale for analog retransmitter output.
Linearization
Square Root Extration
0.5 % of reading, for inputs above 10 % of span.
Programmable cut-off from 0 to 5 %.
2-Wire Transmitter Power Supply
24 Vdc/50 mA maximum, isolated from output, with short-circuit
protection.
0.005 % of span / C using 25 C as the reference temperature
Power supply
75 to 264 Vac 50/60 Hz or 100 to 360 Vdc
Operating Ambient
Dimensions
1/8 DIN (48 x 96 x 187 mm) HxWxD, (45 x 92 mm) HxW
panel cutout.
Weight
0.5 kg nominal.
Warranty
One year.
presys
Frequency
Digital Indicator
Single
DMY-2030-F-Light
Input frequency up to 30 kHz, from 300 mVpp to 30 Vpp.

4 1/2 digit display of high visibility.
Power supply of 75-264 Vac, 50/60 Hz or 100 to 360 Vdc; 24 Vac/dc and 12 Vdc,
as ordered.
Fully configurable by front-panel push-buttons. Configuration stored in non-volatile memory.
- Analog output modules of 4-20 mA, 1-5 Vdc and 0-10 Vdc.
- Up to 2 digital output modules with SPST relay + 2 with SPDT relay modules.
- Communication RS-232 or RS-422/485 with computer
High accuracy.
presys
Order Code
DMY
Model
2030-F-Light: Frequency
Input.
Output 1
0
1
2
3
4
5
6
None
4-20 mA
1-5 Vdc
0-10 Vdc
SPST Relay
Solid State Relay
Output 2
0
1
2
3
None
SPST Relay
Solid State Relay
Output 3
0
1
2
3
None
SPDT Relay
Solid State Relay
Output 4
Power Supply
polarity)
2 - 24 Vac or 24 Vdc (10 %)
3 - 12 Vdc (10 %)
Communication
0
1
2
3
None
RS-232
RS-485
RS-422
Specifications
Input
One frequency input to connect signals in the wave shapes sine,
square, triangle, pulse with amplitude between 300 mVpp and
30 Vpp and dry contact input. 70 Vdc maximum voltage.
Input impedance greater than 60 k
(sine wave, 1 kHz).
Outputs
supply and inputs. Up to 2 SPDT + 2 SPST relay modules, rated
for 3A/220 Vac. Logic signal, open collector transistor, 24 Vdc/40 mA
maximum with isolation. Solid state relay, 2A/250 Vac with isolation.
RS-232 or RS-422/485 with 50 Vdc isolation.
Indication
Configuration
By front-panel push-buttons and internal jumpers
Sampling Rate
71 ms standard.
Half second display update rate.
Accuracy
1 Display resolution for input.
Power Supply for frequency sensors
24 Vdc / 50 mA maximum, isolated from output with
short-circuit protection.
Power Supply
75 to 264 Vac 50/60 Hz or 100 to 360 Vdc
Operating Range
0 to 60 C temperature and 90 % maximum relative
humidity.
Dimensions
1/8 DIN (48 x 96 x 187 mm) HxWxD, (45 x 92 mm)
HxW panel cutout.
Weight
0.5 kg nominal.
Warranty
One year.

Dimensions
310 x 310 x 200 mm (HxWxD)
Weight
11 kg approx.
presys
Universal
Process
Indicator
Dual
DMY-2030 / DMY-2030-F
DMY-2030 / 2011 / 2035 / 2036:
Two universal inputs for RTD, TC, mV, 4-20 mA,

1-5 Vdc and 0-10 Vdc.
DMY-2030F / 2011F / 2035F / 2036F:
Two frequency inputs up to 30 kHz, from 300 mVpp

to 30 Vpp.
High visibility displays.

Linearization for RTD and thermocouple. Square
root extraction.
Configuration stored in non-volatile memory.

- Up to 2 analog output modules 4-20 mA,
1-5 Vdc, 0-10 Vdc.
- Up to 2 SPST relay modules + up to 2
SPDT relay modules.
- Communication RS-232 or RS-422/485
with computer
Simultaneous display of channels on models

with two displays.
DMY-2035 /
DMY-2035-F
DMY-2011 /
DMY-2011-F
DMY-2036 / DMY-2036-F
presys
Order Code
DMY
Model
2030 - Universal Inputs

2030-F - Frequency Inputs
Output 1
0
1
2
3
4
5
6
None
4-20 mA
1-5 Vdc
0-10 Vdc
SPST Relay
Solid State Relay
Output 2
Output 3
0
1
2
3
None
SPDT Relay
Solid State Relay
Output 4
Power Supply

polarity)
2 - 24 Vac or 24 Vdc (10 %)
3 - 12 Vdc (10 %)
Communication
0
1
2
3
None
RS-232
RS-485
RS-422

4 - Explosion-proof (Ex d IIB T6 Gb IP 66), vertical display*
Dimensions
310 x 310 x 200 mm (HxWxD)
Weight
11 kg approx.
Specifications
Inputs
DMY-2030/2011/2035/2036: Two configurable inputs for
thermocouple (J, K, T, E, R, S under ITS-90), 0-55 mV,
RTD Pt-100 under DIN 43760, 4-20 mA,1-5 Vdc and
0-10 Vdc. 4-20 mA with input impedance of 250 .
>10 M up to 5 Vdc and 2 M above 5 Vdc.
DMY-2030-F/2011-F/2035-F/2036-F: Two frequency inputs
for signals up to 30 kHz, from 300 mVpp to 30 Vpp.
Outputs
4-20 mA (750 maximum load), 1-5 Vdc or 0-10 Vdc
analog retransmitter. Up to 2 galvanically isolated modules
to 300 Vac from power supply and inputs. Up to 2 SPDT
relay modules and up to 2 SPST relay modules, rated for
3A/220 Vac. Logic signal, open collector transistor,
24 Vdc/40 mA maximum with isolation. Solid state relay,
Note: In the case of using an analog output, one can use
three alarm modules, or when using two analog outputs,
one can use up to two alarm modules.
Indication
DMY-2030/2030-F: 4 digit red leds display (14 mm).
DMY-2011/2011-F: 2 x 4-digit red leds display (14 mm).
DMY-2035/2035-F: 2 x 4-digit red leds display (9 mm).
DMY-2036/2036-F: 2 x 4-digit red leds display (14 mm and
9 mm). Can be configured together with the decimal point.
Configuration
By front-panel push-buttons and internal jumpers
Sampling Rate
120 ms standard. One second display update rate.
Accuracy
0.1 % of full scale for TC, RTD, mA, mV and Vdc.
1 Display resolution for frequency input.
Linearization
2-wire Transmitter Power Supply
24 Vdc/50 mA maximum, isolated from output with
short circuit protection.
0.005 % of span / C using 25 C as the reference
temperature.
Power Supply
75 to 264 Vac 50/60 Hz or 100 to 360 Vdc
Operating Range
humidity.
Dimensions
DMY-2030/2030-F:1/8 DIN (48 x 96 x 187 mm) HxWxD,
(45 x 92 mm) HxW panel cutout .
DMY-2011/2011-F:1/4 DIN (96 x 96 x 187 mm) HxWxD,
DMY-2035/2035-F: 1/8 DIN (96 x 48 x 187 mm) HxWxD,
DMY-2036/2036-F: 1/8 DIN (48 x 96 x 187 mm) HxWxD,
Weight
0.5 kg nominal (DMY-2030/2030-F/2035/2035-F/2036/2036-F)
0.6 kg nominal (DMY-2011/2011-F).
Warranty
One year.
presys
Process Indicator
and Totalizer Single
DMY-2030-TOT-Light
DMY-2030-TOT-F-Light
DMY-2030-TOT-Light: One universal input.
DMY-2030-TOT-F-Light: One frequency input.
Order Code
DMY
Model
2030-TOT-Light: mV, V, mA
input.
2030-TOT-F-Light: Frequency
input.
Output 1
0
1
2
3
4
5
6
None
4-20 mA
1-5 Vdc
0-10 Vdc
SPST Relay
Solid State Relay
Output 2
Output 3
0
1
2
3
None
SPDT Relay
Solid State Relay
Output 4
Power Supply

polarity)
2 - 24 Vac or 24 Vdc (10 %)
3 - 12 Vdc (10 %)
Communication
0
1
2
3
None
RS-232
RS-485
RS-422

0
1
2
3
General Usage, protected place

Front Aspersion-proof
Weather-proof - IP 66
Explosion-proof (Ex d IIB T6 Gb IP 66), horizontal display*
Dimensions: 310 x 310 x 200 mm (HxWxD)
Weight: 11 kg nominal
10
8-digit configurable display.

Digital input for partial totalization reset.
Specifications
Inputs
DMY-2030-TOT-Light: Configurable input for 0-55 mV, 4-20 mA, 1-5 Vdc and
0-10 Vdc. 4-20 mA with input impedance of 250 . >10 M up to 5 Vdc
and 2 M above 5 Vdc.
DMY-2030-TOT-F-Light: frequency input for signals up to 30 kHz, from
300 mVpp to 30 Vpp digital input. 70 V maximum DC voltage. Input impedance
greater than 60 k (sine, 1 kHz).
Outputs
4-20 mA (750 maximum load), 1-5 Vdc or 0-10 Vdc analog retransmitter.
Up to 2 galvanically isolated modules to 300 Vac from power supply and inputs.
Up to 2 SPDT relay modules and up to 2 SPST relay modules, rated for
3A/220 Vac. Logic signal, open collector transistor, 24 Vdc/40 mA maximum
with isolation. Solid state relay, 2A/250 Vac with isolation.
Indication
8-digit red leds display (9 mm) for totalization and 5-digit for indication.
Can be configured together with the decimal point.
Totalization Range
0 to 99999999 configured together with the decimal point.
Configuration
Sampling Rate
Accuracy
Linearization
14 configurable input points.
24 Vdc/50 mA maximum, isolated from output with short circuit protection.
Power Supply
75 to 264 Vac 50/60 Hz or 100 to 360 Vdc (10 W nominal);
24 Vac/dc (10 %); 12 Vdc (10 %).
Operating Range
Dimensions
1/8 DIN (48 x 96 x 187 mm) HxWxD, (45 x 92 mm) HxW panel cutout.
Weight
0.5 kg nominal.
Warranty
One year.
presys
Process Indicator
and Totalizer Dual
DMY-2030-TOT
DMY-2030-TOT-F
DMY-2030-TOT: Two inputs for mV, 4-20 mA, 1-5 Vdc and 0-10 Vdc.
DMY-2030-TOT-F: Two frequency inputs up to 30 kHz, from 300 mVpp to 30 Vpp.
8-digit display.
Specifications
Order Code
DMY
Model
2030-TOT: mA, Vdc and mV inputs

2030-TOT-F: Frequency inputs
Output 1
0
1
2
3
4
5
6
None
4-20 mA
1-5 Vdc
0-10 Vdc
SPST Relay
Solid State Relay
Output 2
Output 3
0
1
2
3
None
SPDT Relay
Solid State Relay
Output 4
Power Supply
1
2
3
4
75 to 264 Vac 50/60 Hz or 100 to 360 Vdc (any polarity)

24 Vac or 24 Vdc (10%)
12 Vdc (10%)
Others, upon request
Communication
0
1
2
3
None
RS-232
RS-485
RS-422

0
1
2
3
General usage, protected place

Front Aspersion-proof
Weather-proof - IP 66
Explosion-proof (Ex d IIB T6 Gb IP 66), horizontal display*
Dimensions
310 x 310 x 200 mm (HxWxD)
Weight
11 kg nominal
Inputs
DMY-2030-TOT: Two configurable inputs 0-55 mV, 4-20 mA,
1-5 Vdc and 0-10 Vdc. 4-20 mA with input impedance of 250 .
DMY-2030-TOT-F: Two frequency inputs for signals up to 30 kHz,
from 300 mVpp to 30 Vpp.
Outputs
retransmitter. Up to 2 galvanically isolated modules to 300 Vac from
power supply and inputs. Up to 2 SPDT relay modules and up to
2 SPST relay modules, rated for 3A/220 Vac. Logic signal, open
collector transistor, 24 Vdc/40 mA maximum with isolation. Solid
state relay, 2A/250 Vac with isolation.
Indication
8-digit red leds display (9 mm) for totalization and 5-digit for
indication. Can be configured together with the decimal point.
Totalization Range
0 to 99999999 configured together with the decimal point.
Configuration
Sampling Rate
Accuracy
0.5 % of reading, for input above 10 % of span. Programmable
Cut-off from 0 to 5 %.
24 Vdc/50 mA maximum, isolated from output with short
circuit protection.
Power Supply
24 Vac/dc (10 %); 12 Vdc (10 %).
Operating Range
Dimensions
cutout .
Weight
0.5 kg nominal.
Warranty
One year.
11
presys
Process Counter DUAL

DMY-2030-TOT-FCS
DMY-2031-FCS
Ideal for counting of sacks, barrels, etc. or pulses of any sector.
Up to four digital output modules with SPDT and SPST relays.
RS-232 or RS-422/485 Communication.
DMY-2030 -TOT-FCS: Up to 8-digit configurable display.
DMY-2031-FCS: Two 4-digit displays (14 mm and 9 mm).
Robust construction in order to withstand the harshest conditions of industrial use.
Universal power supply of 75 to 264 Vac, 50/60 Hz or 100 to 360 Vdc; 24 Vac/dc and 12 Vdc,
as ordered.
Aspersion-proof Front-panel (optional).

12
presys
Order Code
DMY-
Model
2031-FCS: 2 x 4-digit display
2030-TOT-FCS: 1 x 8-digit
display
Output 1
0 - None
1 - SPST Relay
Output 2
Output 3
0 - None
1 - SPDT Relay
Output 4
Power Supply
polarity)
2 - 24 Vac or 24 Vdc (10 %)
3 - 12 Vdc (10 %)
4 -Others upon request
Communication
0 - None
1 - RS-232
2 - RS-485
3 - RS-422

3 - Explosion-proof (Ex d II B6 Gb IP 66), horizontal display*
Specifications
Inputs
Frequency inputs for signals up to 500 Hz, from 300 mVpp to
30 Vpp. DIN 19234 compliance for intrinsically safe NAMUR
sensors.
Outputs
SPST and SPDT relays rated for 3A/220 Vac.
Plug provided for up to 4 modules. Logic Signal, open collector
transistor, 24 Vdc/40 mA, maximum with isolation. Solid State Relay,
Indication
DMY-2031-FCS: Two 4-digit red leds displays (9 and 14 mm).
DMY-2030-TOT-FCS: One 8-digit red leds display (9 mm).
Totalization Range
DMY-2031-FCS: 0 to 9999 counts.
DMY-2030-TOT-FCS: 0 to 99999999 counts.
Configuration
short circuit protection.
Power Supply
24 Vac/dc (10 %); 12 Vdc (10 %).
Operating Range
Dimensions
panel cutout.
Weight
0.5 kg nominal.
Warranty
One year.
*Explosion-proof box:
Dimensions
310 x 310 x 200 mm (HxWxD)
Weight
11 kg nominal
13
presys
Universal Process Indicator

(Large Digits)
DMY-2032 and DMY-2032-F
Display of 4 large digits (57 mm) that allows easy viewing up to 20 meters away.
DMY-2032: two universal inputs
DMY-2032-F: two frequency inputs.
Other specifications are identical to the DMY-2030 and DMY-2030-F and same order code, in
model field fill as DMY-2032 or DMY-2032-F.
Has characteristics that are common to Presys Line 2000: DMY-20XX, DCY-20XX and TY-20XX.
14
presys
Digital Indicator
for
Load Cell
DMY-2030-CC
Specially developed for use with load cell.
Input range from -30 mV to 30 mV.
Indication with peak hold, minimum and
10V / 100mA power supply for load cell.

TARE function configurable.
maximum.
Order Code
DMY-2030-CC -
Output 1
0 - None
1 - 4-20 mA
2 - 1-5 Vdc
3 - 0-10 Vdc
4 - SPST Relay
Output 2
0 - None
1 - SPDT Relay
Output 3
Power Supply

polarity)
2 - 24 Vac or 24 Vdc (10 %)
3 - 12 Vdc (10 %)
Communication
0 - None
1 - RS-232
2 - RS-485
3 - RS-422

Dimensions
310 x 310 x 200 mm (HxWxD)
Weight
11 kg nominal
Specifications
Inputs
One -30 to 30 mV input.
Input impedance >10 M.
Outputs
supply and inputs, one SPST relay module (replacing the analog output)
and up to 2 SPDT relay modules, rated for 3A/220 Vac. Logic signal,
open collector transistor, 24 Vdc/40 mA maximum with isolation.
Solid state relay, 2A/250 Vac with isolation.
Indication
Configuration
Sampling Rate
64 ms standard.
Accuracy
0.1 % of full scale for inputs.
Power Supply for load cell
10 Vdc/100 mA.
Power Supply
75 to 264 Vac 50/60 Hz or 100 to 360 Vdc
Operating Ambient
Dimensions
cutout.
Weight
0.5 kg nominal.
Warranty
One year.
15
presys
Flow Calculator DMY-2030-CV

Three 4-20mA and 1-5Vdc standard inputs for flow, temperature and pressure signals.
Calculation of flow rate with/without temperature and/or pressure correction, with/without squared root extraction.
Totalization of the corrected flow and preset.
Flow signal linearization up to 21 points.
Includes water steam table.
Flow Measurement Solution with Temperature and Pressure

Compensation Integrated with Totalization
The flow measurement using the principle of differential pressure orifice plate is one of the methods most frequently
used involving transport of fluids and gases. The method is very widespread, this is due to the following factors:
Simplicity and low cost of installation;

Easy maintenance for measuring elements;
Low values of measurement uncertainties.
Flow measurement by differential pressure has many potential uses and application, mainly by the use of flow
measurement compensated in pressure and temperature.
The Flow Calculator DMY-2030-CV has extruded aluminum metal case. Provides three inputs which can be used
for connection with standard analog signals from the differential pressure sensors, gauge pressure and temperature, and
is also the standard 24 Vdc power supply for two-wire transmitter. Presents the signs of the three inputs through
5 digits, performing the aggregation of flow corrected with 8-digit count, and have reset by the front panel or through
external dry contact.
16
presys
Order Code
DMY-2030-CV
Model
Output 1
0 - None
1 - 4-20 mA
2 - 1-5 Vdc
3 - 0-10 Vdc
4 - SPST Relay
Output 2
0 - None
1 - SPST Relay
Output 3
0 - None
1 - SPDT Relay
Output 4
Power Supply
polarity)
2 - 24 Vac or 24 Vdc (10 %)
3 - 12 Vdc (10 %)
Communication
0 - None
1 - RS-232
2 - RS-485
3 - RS-422

Specifications
Inputs
Three configurable inputs for 4-20 mA, 1-5 Vdc.
250 input impedance for mA and >10 M
for 5 Vdc.
Outputs
supply and inputs. Up to 2 SPST relay modules and up to 2 SPDT
relay modules, rated for 3A/220 Vac. Logic signal, open collector
transistor, 24 Vdc/40 mA maximum with isolation. Solid state relay,
Protocol
Indication
8-digit red leds display (9 mm) for totalization and 5 digits for
indication. Can be configured together with the decimal point.
Totalization
0 to 99999999. Can be configured together with the decimal point.
Configuration
Sampling Rate
120 ms standard. One second display update.
Accuracy
0.1 % of full scale for mA and Vdc inputs.
0.5 % of reading, for input above 10 % of span. Programmable
Cut-off from 0 to 5 %.
24 Vdc/50 mA maximum, isolated from output with short circuit
protection
Power Supply
75 to 264 Vac 50/60 Hz or 100 to 360 Vdc
Operating Ambient
Dimensions
cutout.
Weight
0.5 kg nominal.
Warranty
One year.
*Explosion-proof box:
Dimensions
310 x 310 x 200 mm (HxWxD)
Weight
11 kg nominal
17
presys
Pressure Indicator Single

DMY-2017-Light
An input for pressure, use with gases and liquids.

Range from 250 mmH2O to 5000 psi, gauge pressure, absolute or vacuum.
Other characteristics in common to the line 2000 (DMY-20XX; DCY-20XX; TY-20XX).
Pressure Indicator Dual
DMY-2017
Two inputs for pressure, use with gases and liquids.

Range from 250 mmH2O to 5000 psi, gauge pressure, absolute or vacuum.
Other characteristics in common to the line 2000 (DMY-20XX; DCY-20XX; TY-20XX).
18
presys
Order Code
DMY -
Specifications
Model
2017-Light
2017
Input 1
Range
1 - 0 to 250 mmH2O
2 - 0 to 1 psi
3 - 0 to 5 psi
4 - 0 to 15 psi
5 - 0 to 30 psi
6 - 0 to 100 psi
7 - 0 to 250 psi
8 - 0 to 500 psi
9 - 0 to 1000 psi
10 - 0 to 3000 psi *
11 - 0 to 5000 psi *
Only
non-corrosive
gases
Fluids
compatible
with 316
stainless steel
Pressure Type
1 - Gauge
2 - Absolute
3 - Vacuum (0 to 1 atm)
Sensor Type
1 - For air or non-corrosive

gases
2 - For fluids compatible with 316 stainless
steel
Input 2
Only for the model DMY-2017

Same code as Input 1 when used for pressure.
When not being used for pressure, or if the model is
DMY-2017-Light, fill the blanks with 0-0-0 and it
can be used as analog auxiliary input for Vdc, mA,
RTD, TC.
Output 1
0 - None
1 - 4-20 mA
2 - 1-5 Vdc
3 - 0-10 Vdc
4 - SPST Relay
Output 2
Same code as Output 1 (Only for the model DMY-2017)
Output 3
0 - None
1 - SPDT relay
Output 4
Power Supply

2 - 24 Vac or 24 Vdc (10 %)
3 - 12 Vdc (10 %)
Communication
Inputs
DMY-2017-Light: One pressure input.
DMY-2017: One or two pressure inputs.
Input for gauge, absolute pressure or vacuum.
Ranges from 250 mmH2O to 5000 psi (gauge pressure).
Ranges from 15 psi to 1000 psi (Absolute pressure).
Ranges from 1 atm (Vacuum). Use with compressed air
and non-corrosive / conductive gases up to 5 psi.
Air or fluids compatible with 316 stainless steel above 5 psi.
DMY-2017: Auxiliar analog input (for simple version only),
configurable for thermocouple (J, K, T, E, R, S under
ITS-90), 0-55 mV, RTD under DIN 43760, 4-20 mA,
1-5 Vdc and 0-10 Vdc. 250 input impedance for mA,
Outputs
4-20 mA (750 maximum load), 1-5 Vdc or 0-10 Vdc
analog retransmitter. Up to 2 galvanically isolated modules
to 300 Vac from power supply and inputs. SPDT and SPST
relay modules, rated for 3A/220 Vac. Logic signal, open
collector transistor, 24 Vdc/40 mA maximum with isolation.
Note: Slot provided for up to 4 alarm modules
(taking the two slots of the analog outputs).
Indication
4-digit red leds display (14 mm). Can be configured
together with the decimal point.
Engineering Units
psi, atm, inH2O, kgf/cm2, mH2O, mmH2O, inHg, mmHg,
cmHg, bar, mbar and kPa.
Configuration
Sampling Rate
Accuracy
1 % of full scale for 250 mmH2O range.
0.1 % of full scale for the other ranges.
750 maximum load.
short circuit protection
0.01 % of span / C for pressure inputs.
0.005 % of span / C for auxiliar analog inputs.
Reference 25 C.
Power Supply
75 to 264 Vac 50/60 Hz or 100 to 360 Vdc
Operating Range
humidity.
Dimensions
panel cutout.
Pneumatic / hydraulic connection
1/4" Union for plastic tubing for use with air or
1/4" Female NPT for use with other fluids.
Weight
1.0 kg nominal.
Warranty
One year.
0 - None
1 - RS-232
2 - RS-485
3 - RS-422

* Provided only with remote display.
19
presys
DCY-2060-Light /
DCY-2060-F-Light
DCY-2050-Light /
DCY-2050-F-Light
DCY-2051-Light /
DCY-2051-F-Light
Universal Process Controllers - Single Loop

Universal standard input for RTD, thermocouples, 0-55 mV, 4-20 mA,
1-5 Vdc and 0-10 Vdc and remote setpoint input for 4-20 mA, 1-5 Vdc and 0-10 Vdc.
F-Light version for frequency inputs up to 30 kHz, from 300 mVpp to 30 Vpp.
Up to 2 universal output modules for 4-20 mA, 1-5 Vdc and 0-10 Vdc, one for control and
one for retransmission, relay, solid state relay and open collector voltage, isolated from inputs
and power supply.
High control capacity, performing the functions of:

- Auto-Tune.
- ON-OFF, P-PI-PD-PID, ratio control.
- Heating-cooling, time-proportional.
- Remote setpoint, programmable setpoint up to ten segments.
- Auto/manual station.
Several optional:
- Up to 2 SPDT + 2 SPST relay alarm modules;
- RS-232 or RS-422/485 Communication;
Linearization for RTD and TC and also square root extraction.

20
presys
Order Code
DCY -
Model
2050-Light: Universal Input

2050-F-Light: Frequency Input
Output 1 (Only for Control)

0 - None
1 - 4-20 mA
2 - 1-5 Vdc
3 - 0-10 Vdc
4 - SPST Relay
Output 2
(Retransmitter or auxiliar cooling control)

Output 3 (Alarm)
0 - None
1 - SPDT Relay
Output 4 (Alarm)
Power Supply

polarity)
2 - 24 Vac or 24 Vdc (10 %)
3 - 12 Vdc (10 %)
Communication
0 - None
1 - RS-232
2 - RS-485
3 - RS-422

4 - Explosion-proof (EX d IIB T6 Gb IP 66), vertical display*
Dimensions
310 x 310 x 200 mm (HxWxD)
Weight
11 kg nominal
Specifications
Inputs
DCY-2050-Light / 2051-Light / 2060-Light: Configurable input for
thermocouple (J, K, T, E, R, S under ITS-90), 0-55 mV, RTD Pt-100
under DIN43760, 4-20 mA, 1-5 Vdc and 0-10 Vdc. Input for remote
setpoint configurable for 4-20 mA, 1-5 Vdc and 0-10 Vdc. 250 input
impedance for mA, >10 M up to 5 Vdc and 2 M above 5 Vdc.
DCY-2050-F-Light / 2051-F-Light / 2060-F-Light: Frequency input for
signals up to 30 kHz, from 300 mVpp to 30 Vpp. DIN-19234 compliance
for intrinsecally safe NAMUR sensors.
Control Function
ON-OFF, PID, PID with AUTO-TUNE, Heating-cooling, Heating-cooling
proportional, Ratio, Remote Set point and programmable set
point.
Control Outputs
Analog 4-20 mA (750 maximum load), 1-5 Vdc or 0-10 Vdc.
One optional module galvanically isolated to 300 Vac from power supply
and inputs. SPST relay rated for 3A/220 Vac. Open collector transistor
(24 Vdc/40 mA maximum with isolation). Solid state relay (2A/250 Vac
with isolation).
Alarm Outputs
SPDT relay rated for 3A/220 Vac. Open collector transistor
(24 Vdc/40 mA maximum with isolation). Solid state relay (2A/250 Vac
with isolation).
Indication
DCY-2050-Light / 2050-F-Light: Two 4-digit displays (9 mm).
DCY-2051-Light / 2051-F-Light: Two 4-digit displays (14 mm / 9 mm).
DCY-2060-Light / 2060-F-Light: Two 4-digit displays (14 mm).
Configuration
Sampling Rate
130 ms standard. Half second display update rate.
Accuracy
1 display resolution for frequency input.
Linearization
2.0 C at range from 0-60 C ambient temperature.
2-wire transmitter Power Supply
24 Vdc/50 mA maximum, isolated from output, with short circuit
protection.
Power Supply
75 to 264 Vac 50/60 Hz or 100 to 360 Vdc
Operating Range
Dimensions
DCY-2050-Light/2050-F-Light: 1/8 DIN (96 x 48 x 187 mm) HxWxD,
(92 x 45 mm) HxW panel cutout.
Weight
0.5 kg nominal (DCY-2050-Light/2050-F-Light/2051-Light/2051-F-Light).
0.6 kg nominal (DCY-2060 Light/2060-F-Light).
Warranty
One year.
21
presys
DCY-2051 / DCY-2051-F
DCY-2060 / DCY-2060-F
DCY-2050 / DCY-2050-F
Universal Process Controllers - Dual Loop

Two standard universal inputs for RTD, thermocouples, 0-55 mV, 4-20 mA,1-5 Vdc and 0-10 Vdc.
F versions for frequency inputs up to 30 kHz, from 300 mVpp to 30 Vpp.
Up to 2 universal output modules for 4-20 mA, 1-5 Vdc and 0-10 Vdc, one for control and
one for retransmission, relay, solid state relay and open collector voltage isolated from inputs
and power supply.
Reduced dimensions and high control capacity, performing the functions of:
- Auto-Tune.
- ON-OFF, P-PI-PD-PID, ratio, cascade control.
- Heating-cooling, time-proportional.
- Remote setpoint, programmable setpoint up to ten segments.
Several optional:
- Up to 3 SPDT and SPST relay alarm modules;
- RS-232 or RS-422/485 Communication;
Linearization for RTD and TC and also square root extraction.
Also available in the model DCY-2055, without local indication, configurable via serial communication
or through portable programmer.
22
presys
Order Code
Specifications
DCY -
Model
2050: Universal Inputs

2055: Universal Inputs (without
local indication)
2050-F: Frequency Inputs
Output 1 (Only for Control)

0 - None
1 - 4-20 mA
2 - 1-5 Vdc
3 - 0-10 Vdc
4 - SPST Relay
Output 2 (Control or Alarm)

Output 3 (Alarm or aux. cooling control 1)

0 - None
1 - SPDT Relay
Output 4 (Alarm or aux. cooling control 2)

Same code as output 3
Power Supply
2 - 24 Vac or 24 Vdc (10 %)
3 - 12 Vdc (10 %)
Communication
0 - None
1 - RS-232
2 - RS-485
3 - RS-422

Dimensions
310 x 310 x 200 mm (HxWxD)
Weight
11 kg nominal
Entradas
DCY-2050 / 2051 / 2060 / 2055: Configurable inputs for
thermocouple (J, K, T, E, R, S under ITS-90), 0-55 mV,
RTD Pt-100 under DIN43760, 4-20 mA, 1-5 Vdc and
0-10 Vdc. Input for remote setpoint configurable for
4-20 mA, 1-5 Vdc and 0-10 Vdc. 250 input impedance
for mA, >10 M up to 5 Vdc and 2 M above 5 Vdc.
DCY-2050-F / 2051-F / 2060-F:
Frequency inputs for signals up to 30 kHz, from 300 mVpp
to 30 Vpp. DIN-19234 compliance for intrinsecally safe
NAMUR sensors.
Control Functions
ON-OFF, PID, PID with AUTO-TUNE, Heating-cooling,
Ratio, Cascade, Remote Set point and programmable set point.
Control Outputs
Up to two optional module galvanically isolated to 300 Vac from
power supply and inputs. SPST relay rated for 3A/220 Vac. Open
collector transistor (24 Vdc/40 mA maximum with isolation).
Solid state relay (2A/250 Vac with isolation).
Alarm Outputs
SPDT relay rated for 3A/220 Vac. Open collector transistor
(24 Vdc/40 mA maximum with isolation). Solid state relay
(2A/250 Vac with isolation).
Indication
DCY-2050 / 2050-F: Two 4-digit displays (9 mm).
DCY-2051 / 2051-F: Two 4-digit displays (14 mm / 9 mm).
DCY-2060 / 2060-F: Two 4-digit displays (14 mm).
DCY-2055: Without local indication.
Configuration
DCY-2050 / DCY-2051 / DCY-2060: By front-panel push-buttons
and internal jumpers. DCY-2055: Via serial communication or
MCY-25 configuration module.
Sampling Rate
Accuracy
Linearization
protection.
0.005 % of span / C for auxiliar input .Reference temperature: 25 C.
Power Supply
75 to 264 Vac 50/60 Hz or 100 to 360 Vdc
Operating Range
Dimensions
DCY-2050 / 2050-F: 1/8 DIN (96 x 48 x 187 mm) HxWxD,
DCY-2055: (140 x 53 x 175 mm) HxWxD.
Weight
0.5 kg nominal (DCY-2050/2051)
0.6 kg nominal (DCY-2060/2055)
Warranty
One year.
23
presys
3 Elements
Digital Controller
for Boiler Level
DCY-2050-LC / DCY-2051-LC
DCY-2060-LC
3 Elements control: boiler level, water flow and
steam flow.
Three standard inputs for 4-20 mA and 1-5 Vdc,
configurable.
Order Code
DCY -
-LC -
Model
2050: 1/8 DIN case, vertical display

2051: 1/8 DIN case horizontal display
2060: 1/4 DIN case.
Output 1 (2 elements control)

0 - None
1 - 4-20 mA
2 - 1-5 Vdc
3 - 0-10 Vdc
Output 2 (3 elements control)

Output 3 (Alarm)
0 - None
1 - SPDT Relay
2 - Open Collector
Output 4 (Alarm)
Power Supply

2 - 24 Vac or 24 Vdc (10 %)
3 - 12 Vdc (10 %)
Communication
0 - None
1 - RS-232
2 - RS-485
3 - RS-422

Dimensions
310 x 310 x 200 mm (HxWxD)
Weight
11 kg nominal
24
Two analog outputs for 4-20 mA, 1-5 Vdc

and 0-10 Vdc, one for control 3 elements
control and one for 2 elements control.
Specifications
Inputs
Configurable for 4-20 mA and 1-5 Vdc. 250 input impedance for mA
and >10 M for 5 Vdc.
Functions
P-PI-PD-PID Control. Flow totalization. Auto/Manual Station.
Control Outputs
Analog 4-20 mA (750 maximum load), 1-5 Vdc or 0-10 Vdc, configurable.
Alarm Outputs
Up to 2 SPDT rated for 3A/220 Vac.
Open collector transistor (24 Vdc/40 mA maximum with isolation). Solid state
relay (2A/250 Vac with isolation).
Indication
DCY-2050-LC: Two 4-digit displays (9 mm).
DCY-2051-LC: Two 4-digit displays (14 mm/9 mm).
DCY-2060-LC: Two 4-digit displays (14 mm).
Configuration
Sampling Rate
Accuracy
0.1 % of full scale for mA and Vdc inputs.
0.5 % of full scale for analog output.
0.5 % of reading, for inputs above 10 % of span. Programmable Cut-off from
0 to 5 %.
24 Vdc/50 mA maximum, isolated from output, with short circuit protection.
0.005 % of span / C for auxiliar input. Reference temperature: 25 C.
Power Supply
24 Vac/dc (10 %); 12 Vdc (10 %).
Operating Range
Dimensions
DCY-2050-LC: 1/8 DIN (96 x 48 x 187 mm) HxWxD, (92 x 45 mm) HxW panel cutout.
Weight
0.5 kg nominal (DCY-2050-LC/2051-LC) / 0.6 kg nominal (DCY-2060-LC).
Warranty
One year.
presys
Auto/Manual
Station
DCY-2058 /
DCY-2059
Two standard inputs for 4-20 mA, 1-5 Vdc and
Configurable as Auto-Manual Station, Manual
0-10 Vdc.
Up to 2 analog outputs for 4-20 mA, 1-5 Vdc
and 0-10 Vdc, galvanically isolated from inputs
and power supply.
Station or Automatic Station.

11 linearization points of the output signal.
RS-232 or RS-422/485 Communication.
Universal Power Supply: 75 to 264 Vac,
50/60 Hz, 24 Vac/dc or 12 Vdc, as ordered.
Order Code
DCY-
Model
2058: 1/8 DIN case, vertical display

2059: 1/8 DIN case, horizontal display
Version
1 - Single Loop
2 - Dual Loop
Power Supply
1 - 75 to 264 Vac 50/60 Hz or 100 to 360 Vdc

(any polarity)
2 - 24 Vac or 24 Vdc (10 %)
3 - 12 Vdc (10 %)
Communication
0 - None
1 - RS-232
2 - RS-485
3 - RS-422

4 - Explosion-proof (Ex d IIB T6 Gb IP 66), vertical display*
Dimensions
310 x 310 x 200 mm (HxWxD)
Weight
11 kg nominal
Specifications
Inputs
Two configurable inputs for 4-20 mA, 1-5 Vdc and 0-10 Vdc, selected by the user.
250 input impedance for mA, >10 M for 5 Vdc and 2 M above 5 Vdc.
Outputs
Analog 4-20 mA (750 maximum load), 1-5 Vdc or 0-10 Vdc. Up to 2 optional
modules galvanically isolated to 300 Vac from power supply and inputs
Indication
DCY-2058: Two 4-digit red leds display (9 mm).
DCY-2059: Two 4-digit red leds display (9 mm and 14 mm).
Configuration
Sampling Rate
Simple Station: 64 ms standard. Half second display update rate.
Dual Station: 120 ms standard. 0.6 seconds display update rate.
Accuracy
0.5 % of full scale for input indication and output generation.
24 Vdc/50 mA maximum, isolated from output, with short circuit protection.
Power Supply
75 to 264 Vac 50/60 Hz or 100 to 360 Vdc
Operating Range
Dimensions
DCY-2058: 1/8 DIN (96 x 48 x 187 mm) HxWxD,
DCY-2059: 1/8 DIN (48 x 96 x 187 mm) HxWxD,
Weight
0.5 kg nominal.
Warranty
One year.
25
presys
Pressure Controller DCY-2057

Direct input for pressure, gases and liquids.
Ranges: 0 to 250 mmH2O, 1 psi, 5 psi, 15 psi, 30 psi, 100 psi, 250 psi, 500 psi and 1000 psi.
Gauge or absolute pressure and vacuum.
Auxiliar universal input for RTD, thermocouple, 0-55 mV, 4-20 mA, 1-5 Vdc and 0-10 Vdc.
Mounting options in weather-proof box.
High control capacity, performing the functions of:
- Auto-tune.
- ON-OFF, P-PI-PD-PID, ratio, cascade control.
- Remote Setpoint, programmable set point up to 10 segments
Several options available:
- Up to 2 analog output modules 4-20 mA, 1-5 Vdc and 0-10 Vdc.
- Up to 3 alarm modules with SPDT and SPST relays.
- Front Aspersion-proof.
- RS-232 or RS-422/485 Communication.
Ideal for
Pressure and
Temperature
Control
in
Reactors
Robust construction in order to support the harshest conditions of industrial use.
75 to 264 Vac, 50/60 Hz or 100 to 360 Vdc; 24 Vac/dc and 12 Vdc power supply,
as ordered.
High level of accuracy, also performs square root extraction.

Fully programmable from the front panel. Configuration stored in non-volatile memory.
26
presys
Order Code
DCY-2057 -
Input
Range
1 - 0 to 250 mmH2O
*
2 - 0 to 1 psi
3 - 0 to 5 psi
4 - 0 to 15 psi
5 - 0 to 30 psi
6 - 0 to 100 psi
**
7 - 0 to 250 psi
8 - 0 to 500 psi
9 - 0 to 1000 psi
Pressure Type
1 - Gauge
2 - Absolute
3 - Vacuum (0 to 1 atm)
Sensor Type
1 - For air or non-corrosive gases

2 - For fluids compatible with
316 Stainless Steel (sealed)
* air or non-corrosive gases
** sealed
Output 1 (Control)
0 - None
1 - 4-20 mA
2 - 1-5 Vdc
3 - 0-10 Vdc
4 - SPST Relay
6 - External Solid State Relay
Output 2 (Alarm)
Output 3 (Alarm)
0 - None
1 - SPDT Relay
Output 4 (Alarm)
Power Supply

polarity)
2 - 24 Vac or 24 Vdc (10 %)
3 - 12 Vdc (10 %)
Specifications
Inputs
Input for vacuum, gauge or absolute pressure.
Ranges from 250 mmH2O to 1000 psi (Gauge Pressure).
Ranges from 15 psi to 1000 psi (Absolute Pressure). Range up to
1 atm (Vacuum). Use with compressed air and non-corrosive /
condutive gases, up to 5 psi. Above 5 psi, use with liquids and
fluids compatible with 316 stainless steel. Auxiliar analog input for TC
(J, K, T, E, R, S under ITS-90), 0-55 mV, RTD Pt-100, under
DIN-43760, 4-20 mA, 1-5 Vdc and 0-10 Vdc. 250 input impedance
for mA, >10 M up to 5 Vdc and 2 M above 5 Vdc.
Control Functions
ON-OFF, PID, PID with AUTO-TUNE, Ratio, Cascade and Remote
Set point.
Control Output
Up to 2 optional module galvanically isolated to 300 Vac from power
supply and inputs. SPST Relay rated for 3A/220 Vca. Open collector
transistor (24 Vdc/40 mA maximum with isolation). Solid state relay
(2A/250 Vac maximum with isolation).
Alarm Outputs
SPDT relay rated for 3A/220 Vac. Open Collector Transistor (24 Vdc/40 mA
maximum with isolation). Solid state relay (2A/250 Vac with isolation).
Indication
Two 4-digit red leds displays (14 mm) which can be configured together
with the decimal point.
Configuration
Sampling Rate
Accuracy
1 % of full scale for the range of 250 mmH2O.
0.1 % of full scale for the other pressure ranges.
0.5 % of full scale for analog retransmitter output, 750 maximum load .
Linearization
protection.
0.005 % of span / C for auxiliar analog input.
0.01 % of span / C for pressure inputs.
Reference temperature: 25 C
Power Supply
75 to 264 Vac 50/60 Hz or 100 to 360 Vdc
Operating Range
Dimensions
1/4 DIN (96 x 96 x 187 mm) HxWxD, (92 x 92 mm) HxW panel cutout.
Weight
1.0 kg nominal.
Warranty
One year.
Communication
0 - None
1 - RS-232
2 - RS-485
3 - RS-422

27
presys
Universal
Smart
Transmitter
TY-2090 /
TY-2090-F
Transmitter and / or Alarm Monitor in one instrument, it may have up to four alarm modules.
TY-2090: Two universal standard inputs for RTD, TC, 0-55 mVdc, 4-20 mA, 1-5 Vdc and 0-10 Vdc.
TY-2090-F: Two frequency inputs, up to 30 kHz, from 300 mVpp to 30 Vpp.
One or two universal output for 4-20 mA, 1-5 Vdc, 0-10 Vdc, isolated from inputs.
Programmable via serial communication or through portable configurator.
Linearization for RTD and TC. Square root extraction.
DIN rail or surface assembly.
RS-232 or RS-422/485 Communication (optional).
28
presys
Order Code
TY -
Model
Output 1
0 - None
1 - 4-20 mA
2 - 1-5 Vdc
3 - 0-10 Vdc
4 - SPST Relay
Output 2
Output 3
0 - None
1 - SPDT Relay
Output 4
Power Supply
polarity)
2 - 24 Vac or 24 Vdc (10 %)
3 - 12 Vdc (10 %)
4 - Other, upon request
Communication
0 - None
1 - RS-232
2 - RS-485
3 - RS-422

0 - General usage, protected place, surface assembly
1 - General usage, protected place, DIN rail assembly
3 - Explosion-proof (Ex d IIB T6 Gb IP 66), without display*
4 - Dust-proof
Specifications
Inputs
TY-2090: Configurable inputs for thermocouple (J, K, T, E,
R, S under ITS-90), 0-55 mV, RTD Pt-100 under DIN 43760,
4-20 mA, 1-5 Vdc and 0-10 Vdc. 250 input impedance for mA,
TY-2090-F: Frequency inputs for signals up to 30 kHz, from
300 mVpp to 30 Vpp. DIN-19234 compliance for intrinsically safe
NAMUR sensors.
Outputs
retransmitter. Up to 2 galvanically isolated module to 300 Vac
from power supply and inputs. Up to 2 SPST relay modules and
up to 2 SPDT relay modules, rated for 3A/220 Vac. Logic signal,
open collector transistor, 24 Vdc/40 mA maximum with isolation.
Configuration
Via serial communication or MCY-20 configuration module.
Sampling Rate
120 ms standard.
Accuracy
0.1 % of full scale for TC, RTD, mA, mV and Vdc inputs, with
acquisition via RS-232 or RS-422/485 communication.
0.2 % of full scale for analog output and maximum load of 750.
Linearization
for acquisition by RS-232 or RS-422/485.
for analog output.
Power Supply
75 to 264 Vac 50/60 Hz or 100 to 360 Vdc (any polarity)
Operating Range
Dimensions
(140 x 53 x 175 mm) HxWxD.
Weight
0.5 kg nominal.
Warranty
One year.
Dimensions
310 x 310 x 200 mm (HxWxD)
Weight
11 kg nominal
29
presys
Pressure to
Current
Converter (P/I)
TY-1110-DIN
Converts pressure signal normally 3 to 15 psi for
signal 4 to 20 mA, two-wire system using
semiconductor device (solid state).
Has no moving parts, does not require the usual

periodic maintenance on pneumatic tools using
nozzle-baffle systems, holes, diaphragms etc.
Order Code:
TY-1110-DIN
Model
Input
3/15 - 3 to 15 psig.
Other values, upon request.
Note: Values within the maximum and minimum
limits of span, for absolute pressure or gauge.
Output
4/20 - 4 to 20 mAdc.
Power Supply
24 - 24 Vdc (2-wire system).
Connection
01 - Union for " flexible hose.
Code Example
TY-1110-DIN 3/15 4/20 24 01.
Defines a converter TY-1110-DIN pressure to current of input
3-15 psig and output 4-20 mAdc with 24Vdc power supply
and pneumatic connections type union for " flexible hose.
30
Specifications
Ranges
0 to 250 mmH2O minimum.
0 to 100 psig / psia maximum.
Pressure Type
Gauge or Absolute.
Accuracy
0.25 % of span.
0.05 % / C for process temperature variation.
0.01 % / C for ambient temperature variation.
Operating Range
-5 to + 60 C.
Overpressure
Up to two times the full scale pressure.
Power Supply
14 Vdc minimum; 45 Vdc maximum (2-wire system).
Pneumatic Connection
Union for flexible hose.
Case
Extruded anodized aluminum.
Dimensions
91 x 44 x 150 mm nominal (HxWxD).
Weight
0.5 kg nominal.
Warranty
One year.
Dimensional
Dimensional Drawing (only for mounting in protected place)
presys
Electropneumatic
Converter
(I/P) Weather-proof
TY-1125-TEM
Model with weather-proof box for field mounting.
Specifications
Order Code:
TY-1125-TEM
Model
Input
4/20 - 4 to 20 mAdc.
10/50 - 10 to 50 mAdc.
Output
3/15 - 3 a 15 psi.
3/27 - 3 a 27 psi.
Accessories
Y1
Y3
Y4
Y5
Y6
Mounting device 2 inch tube.

Filter with pressure regulator and pressure gauge.
Filter.
Pressure regulator.
Pressure gauge.
Code Example
TY-1125 - TEM - 4/20 - 3/15 - Y1.
Defines a current to pressure converter for mounting in 2 inch
tube, in weather-proof box with 4-20 mA input and 3-15 psi
output.
Air Supply
1.6 scfm.
Pneumatic Supply
20 psi for 3-15 psi output, 30 psi maximum.
37 psi for 3-27 psi output, 40 psi maximum.
Air Demand
0.08 scfm.
Accuracy
0.5 % of span.
Repeatability
0.25 % of span.
Linearity
Less than or equal to 0.5%.
Hysteresis
Less than or equal to 0.2 %.
Temperature
-40 C + 80 C.
Connection
Cable gland Pg 9 (cable diameter: 4-10 mm) electrical part,
1/4 NPT pneumatic part.
Warranty
One year.
Dimensional
NOTA: The filter regulator is coalescent type, of less than

5 microns, and therefore, suitable for use with TY-1125
converters.
WARNING: Be careful with the compressed air, make sure
it is within the standards for instrumentation.
31
presys
Virtual Recorder VR-2000 - 3.3
RECORDER and DATA-LOGGER simulator software.

Circular graphics printing with the same look of
traditional physical recorders. Also offers online
and historical trend graphs.
Receives signals for register of any instrument of

line 2000, mainly DMY-2015, DMY-2015-DLY,
TY-2095 and TY-2095-DLY.
It offers extensive and advanced set of functions of

DATA-LOGGER and EVENTS RECORDER.
Compatible with Windows XP or higher, 32/64 bits.
32
presys
Simple to install, easy to use.
Example of VR-2000 use with the TY-2095 measuring 12 temperature

points from thermocouple inputs. It can simulate 12 records of a pen each
or 6 records of two pens, or any desired combination.
As a Data-Logger, operating together with the DMY-2015-DLY,

it allows configuration and acquisitions in field with posterior data
recovery to export in spreadsheet and visualization graphics.
Incorporates the configurator module of the Line 2000 instruments, COMFYS-2.2.
Specifications
Process monitoring through trend charts and circular;
Allows bargraphs viewing;
View data saved in disk or database;
Allows programming, collection and acquisitions viewing together
with the DMY-2015-DLY / TY-2095-DLY;
Allows online configuration of the Line 2000 instruments,
backup and configuration recovery;
MODBUS (RS-232/TCP) Communication Protocol;
Data export to spreadsheet;
Generates and saves alarm events;
It has user access control system.
COMFYS-2.2.
Allows remote configuration of the Line 2000 Presys instruments via
MODBUS RTU / TCP (requires converter);
It also allows the reading and storage of an instrument configuration,
as well as the subsequent reloading of it.
Available as a free download for use together with
Presys Instruments in our website.
Compatible with Windows XP or higher 32/64 bits.
33
presys
Multi-Loop Data-Logger
Module
DMY-2015-DLY
Available inputs for DMY-2015-DLY and TY-2095-DLY:
- 12 thermocouple inputs.
- 8 RTD inputs.
- 12 current inputs 4-20 mA.
- 12 voltage inputs 1-5 Vdc.
- Combinations of two types of input.
Several optional are available:
TY-2095-DLY
Data Logger function for storage of up to
256 000 readings.
High level of accuracy. RTD and thermocouple
linearization; square root extraction for mA and V

inputs.
DMY-2015-DLY: 4-digit display of high

visibility and 2-digit display to indicate the
- 2 alarm modules with SPDT relay.
channel. Fully configurable from the front panel.
- Aspersion-proof front panel.
ACK button.
- RS-232 or RS-422/485 communication.
TY-2095-DLY: DIN rail or surface mounting.

Configurable via serial communication or
through configuration module.
34
presys
Order Code
Model
DMY-2015-DLY
TY-2095-DLY
Inputs
0 - 12 thermocouples
1 - 8 RTD
2 - 6 thermocouples and 4 RTD
3 - 12 current mA
4 - 12 voltage V
5 - 6 thermocouples and 6 current mA
6 - 6 thermocouples and 6 voltage V
7 - 6 current mA and 6 voltage V
8 - 6 current mA and 4 RTD
9 - 6 voltage V and 4 RTD
Output 1
0 - None
1 - SPDT Relay
Output 2
Power Supply
polarity)
2 - 24 Vac or 24 Vdc (10 %)
3 - 12 Vdc (10 %)
Communication
0 - None
1 - RS-232
2 - RS-485
3 - RS-422

DMY-2015-DLY:
TY-2095-DLY:
0 - General usage, protected place, surface mounting
1 - General usage, protected place, DIN rail mounting
3 - Dust-proof
Specifications
Inputs
Thermocouple (J, K, T, E, R, S under ITS - 90).
4-20 mA, 250 input impedance.
1-5 Vdc, input impedance >10 M.
Outputs
Two SPDT relay modules rated for 3A/220 Vac.
Indication
DMY-2015-DLY: 4-digit red leds display (14 mm),
that can be configured together with the decimal point.
TY-2095-DLY: without local indication.
Configuration
DMY-2015-DLY: by front panel push buttons.
TY-2095-DLY: through the MCY-25 portable configurator.
Sampling Rate
Accuracy
0.1 % of full scale for TC, RTD, mA, and Vdc.
Linearization
Power Supply
75 to 264 Vac 50/60 Hz or 100 to 360 Vdc
Operating Range
Dimensions
DMY-2015-DLY: 1/4 DIN (96 x 96 x 187 mm) HxWxD, (92 x 92 mm) HxW
panel cutout.
TY-2095-DLY: (140 x 93 x 173 mm) HxWxD.
Weight
0.7 kg nominal.
Warranty
One year.
35
presys
Data
Acquisition
Module
TY-2095 and
TY-2095-PB
Available models:
- 12 thermocouple inputs.
- 8 RTD inputs.
- 12 current 4-20 mA inputs.
- 12 voltage 1-5 Vdc inputs.
- Combination of two input types.
Eight voltage or current inputs totalization.

Available optionals:
- Up to two SPDT relay alarm modules.
- RS-232, RS-422/485 Communication (MODBUS RTU Protocol) or PROFIBUS (DP-V0)*.
Features DIN rail or surface mounting.

High level of accuracy. RTD and thermocouple linearization; square root extraction for mA and V inputs.
Configurable via serial communication or through portable configurator.
*Available only for the model TY-2095-PB

36
presys
Order Code
Model
TY-2095
TY-2095-PB
Inputs
0 - 12 thermocouples
1 - 8 RTD
2 - 6 thermocouples and 4 RTD
3 - 12 current mA
4 - 12 voltage V
5 - 6 thermocouples and 6 current mA
6 - 6 thermocouples and 6 voltage V
7 - 6 current mA and 6 voltage V
8 - 6 current mA and 4 RTD
9 - 6 voltage V and 4 RTD
Output 1
0 - None
1 - SPDT Relay
Output 2
Power Supply
polarity)
2 - 24 Vac or 24 Vdc (10 %)
3 - 12 Vdc (10 %)
Communication
0 - None
4 - PROFIBUS DP-V0 (RS-485)**

0 - General usage, protected place, surface mounting
1 - General usage, protected place, DIN rail mounting
3 - Explosion-proof (Ex d IIB T6 Gb 66), without display***
4 - Dust-proof
Specifications
Inputs
Thermocouple (J, K, T, E, R, S under ITS - 90).
4-20 mA with input impedance of 250 .
1 to 5 Vdc with input impedance >10 M.
Outputs
Up to 2 SPDT relays rated for 3A/220 Vac.
TY-2095: RS-232 or RS-422/485. MODBUS-RTU
TY-2095-PB: PROFIBUS DP-V0: RS-485.
Indication
Without local indication. Maximum range from -999 to 9999
viewed through the MCY-25 Configuration Module.
Totalization
Totalization of eight voltage or current inputs ranging from
0 to 9999, configured with the decimal point.
Configuration
Through MCY-25 portable configurator.
Sampling Rate
Accuracy
0.1 % of full scale for TC, RTD, mA, Vdc.
Linearization
0.005 % of span / C using 25 C as the reference
temperature.
Power Supply
75 to 264 Vac 50/60 Hz or 100 to 360 Vdc
Operating Range
Dimensions
140 x 93 x 173 mm HxWxD.
Weight
0.7 kg nominal.
Warranty
One year.
* Only available for the model TY-2095

** Only available for the model TY-2095-PB
*** Explosion-proof box:
Dimensions
310 x 310 x 200 mm (HxWxD)
Weight
11 kg nominal
37
presys
Accessories
Analog Output Module MSAN-20
Generates 4-20 mA, 1-5 Vdc, 0-10 Vdc signals. For use as a control
output or retransmitter output of the process variable.
Relay Output Module MALRE-20

Electromechanical relay for use in control or alarm, current up to 3A
in 220 Vac. It has RC circuit (snubber) to eliminate the noise
caused by contacts opening / closing . Depending on the application,
this snubber must be disabled to allow the passage of a little AC current.
Solid State Relay

Output Module MALRS-20
Semiconductor relay for current up to 1A. Suitable for inductive
loads, especially solenoids and contactors. It can not be used in
direct current.
Pulsed Output Module MSD-20

Also called Logic Output or Open Collector Output.
Generates 24 V voltage signal in PWM. Used to
activate external power units such as thyristor unit.
RS-232 Communication
Module MCOM RS232
RS-232 interface for communication for connecting
one single instrument to the computer. Maximum
distance 15 meters.
38
presys
RS-485Communication
Module MCOM RS-485
RS-485 Communication Interface, to connect up to
31 instruments in a network with the computer.
Maximum distance 1200 meters.
Power Filter FLAY-02

Used when the mains power signal has
great intensity of high frequency noise.
Filter for Input

Signal FLSY-03/FLSY-06
With three or six pins, for filtering electrical noise
present in the input signal.
External Thyristor
Power Unit MTY-48D10
Used for controlling loads up to 10 Aac. It is necessary
that the instrument has the Open Collector Module MSD-20.
Other types of thyristor unit are available on request.
Configurators
MCY-20/MCY-25/MCY-55
For use with instruments TY-2090, TY-2095,
DCY-2055. It allows its configuration by
keyboard and display.
Converter Unit
RS-232/485UNICONV232/485
Used for a network connection of the
instruments to the computer serial port.
39
Explosion-proof
Panel for
Line 2000
Instruments
The Presys Explosion-proof box was especially developed for instruments used in the
Industrial Process as Indicators, Controllers and Transmitters.
Main Features:
- Applicable in area of explosive atmosphere, consisting of combustible gases,
classified as Zone 1 Group IIB.
- Fully protected against dust and water jets.
- Certificate of Conformity to Electrical Equipment for Potentially Explosive Atmospheres,
by IEE-USP and TV RHEINLAND, with the marks Ex d IIB T6 Gb IP66.
- Fully programmable by the front panel push-buttons, via serial communication or
through portable configurator as specified model.
40
presys
Explosion-proof Models with Horizontal Display
DMY-2030, DMY-2030-F, DMY-2030-TOT, DMY-2030-TOT-F, DMY-2030-Light, DMY-2030-F-Light, DMY-2030-TOT-Light,
DMY-2030-TOT-F-Light, DMY-2030-CC, DMY-2030-CV, DMY-2030-TOT-FCS, DMY-2031-FCS, DMY-2036, DMY-2036-F,
DMY-2011, DMY-2011-F, DMY-2015, DMY-2015-PB, DCY-2051, DCY-2051-F, DCY-2051-Light, DCY-2051-F-Light,
DCY-2051-LC, DCY-2059, DCY-2060, DCY-2060-F, DCY-2060-Light, DCY-2060-F-Light, DCY-2060-LC.
Explosion-proof Models with Vertical Display
DMY-2035, DMY-2035-F, DCY-2050, DCY-2050-F, DCY-2050-Light, DCY-2050-F-Light, DMY-2050-LC, DCY-2058.
200mm
140mm
15mm(x4)
Explosion-proof Models Without Display

DCY-2055, TY-2090, TY-2090-F, TY-2095.
310mm
275mm
A M
Horizontal Display
Vertical Display
Without Display
NOTE: Command buttons with mounting option for 1, 2, 3, 4 buttons or none.
Threaded Entrances Layout.
POSITION
80mm
NOMINAL
(NPT)
3/4"
1"
1.1/4"
1.1/2"
C
ORDER CODE EXAMPLE: EXPLOSION-PROOF INDICATOR
DMY-2030 - 0 - 0 - 0 - 0 - 1 - 0 - 3 (G3/4 + H1 + I3/4)
CHOSEN POSITIONS
CASE PROTECTION GRADE

SERIAL COMMUNICATION
POWER SUPPLY
OUTPUT 4
OUTPUT 3
OUTPUT 2
OUTPUT 1
MODEL
41
presys
Dimensional
Drawings
Models: TY-2090 and DCY-2055

DIN rail adapter
GND Terminal
26.5 mm
148.5 mm
140 mm
91 mm
130.5 m m
Terminal block
4.5 mm
175 mm
53 mm
Side View
Front View
Models: TY-2095/ TY-2095-PB/ TY-2095-DLY

DIN rail adapter
26.5 mm
146.5 mm
173 mm
Side View
42
93 mm
Front View
140 mm
91 mm
GND Terminal
4.5 mm
130.5 mm
Terminal block
presys
1/4 DIN Models
DMY-2011, DMY-2015, DMY-2015-PB, DMY-2015-DLY, DMY-2017,
DMY-2017-Light, DCY-2057, DCY-2060, DCY-2060-LC and DCY-2060-Light
91 m m
96 mm
12 mm
26,5
mm
148.5 mm
Front View
GND Terminal
187 mm
92 mm - 0.0
+0.8
Side View
Panel Cutout(*)
1/8 DIN Models with Vertical Orientation

DMY-2035, DCY-2050, DCY-2050-LC, DCY-2050-Light and DCY-2058
148.5 mm
187 mm
26.5
mm
GND Terminal
Side View
Front View
+0.6
92 m m - 0.0
+0.8
45 mm - 0.0
44 mm
12 mm
96 mm
91 mm
48 mm
Vista Superior
(*)Maximum panel thickness: 10 mm
Panel Cutout (*)

43
presys
1/8 DIN Models with Horizontal Orientation
DMY-2030, DMY-2030-Light, DMY-2030-TOT, DMY-2030-TOT-Light, DMY-2030-CC,
DMY-2030-CV, DMY-2031-FCS, DMY-2030-TOT-FCS, DCY-2051, DCY-2051-LC,
DCY-2051-Light, DCY-2059 and DMY-2036
48 mm
44 mm
96 mm
Side View
Front View
+0.8
- 0.0
45 mm
+0.6
- 0.0
91 mm
92 mm
Panel Cutout(*)
26.5
mm
148.5 mm
12 mm
GND Terminal
187 mm
Upper View
Model: DMY-2032
20 mm
140 mm
26.5
mm
GND Terminal
130 mm
91 mm
235 mm
Front View
186.5 mm
92 mm - 0.0
+0.8
Side View
(*)Maximum panel thickness: 10 mm
44
Panel Cutout(*)
presys
Weather-proof Models - IP 66
180 mm
INSTRUMENT FIXING
SUPPORT
TRANSPARENT
COVER
155 mm
DISPLAY
(1/8 or 1/4 DIN)
PR E SYS
LD2
245 mm
270 mm
LD1
INSTRUMENT
(1/8 OR 1/4 DIN)
SIDE VIEW
FRONTAL
VIEW
2 PG9 CABLE GLAND

ELECTRICAL INPUTS
DRILLING FOR WALL FIXING
45 mm
171 mm
126 mm
USE SCREW DIAMETER = 6.0 mm

SCREW HEAD MAXIMUM DIAMETER = 10.0 mm
MINIMUM LENGTH = 30.0 mm
BOX FOR WALL FIXING
UPPER VIEW
CLAMP
2 TUBE
CLAMP
2 TUBE
223.5 mm
SUPPORT
223.5 mm
SUPPORT
ASSEMBLY WITH 2 " TUBE SUPPORT
HORIZONTAL AND VERTICAL
45
presys
HART Field
Communicator
FCY-15
Hart Configurator, with DD library, configures device specific parameters.

25 Vdc Power supply for 2-wire transmitters.
Configurable 250 internal resistor.
5.7'' high visibility touch screen display.
Portable, powered by rechargeable batteries for field use.
Configurador Hart Full.
USB software update.
46
Instrumentos e Sistemas
EMENT SYS
AG
Calibrao
NBR ISO/IEC
17025
QUA ITY
L
CAL 0193
M
TE
PRESYS
Rua Luiz da Costa Ramos, 260

So Paulo - SP - 04157-020
Tel: (11) 3056.1900
Fax: (11) 5073.3366
http://www.presyscorp.com
E-mail: vendas@presys.com.br
MA
N
Instrumentation and
Process Control
OCP 0004
EF-0241-01

Process Control Presys

Uploaded by

Copyright:

Available Formats

Process Control Presys

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Process Control Presys

Uploaded by

Copyright:

Available Formats

R

Rua Luiz da Costa Ramos, 260

Universal Digital Indicator - Single - DMY-2030-Light

Frequency Digital Indicator - Single - DMY-2030-F-Light

Universal Process Indicator - Dual - DMY-2030 / DMY-2030-F / DMY-2011 / DMY-2011-F / DMY-2035 /

Process Indicator and Totalizer - Single - DMY-2030-TOT-Light / DMY-2030-TOT-F-Light

Process Indicator and Totalizer - Dual - DMY-2030-TOT / DMY-2030-TOT-F

Process Counter - Dual - DMY-2030-TOT-FCS / DMY-2031-FCS

Universal Process Indicator (Large Digits) - DMY-2032 / DMY-2032-F

Digital Indicator for Load Cell - DMY-2030-CC

Flow Calculator - DMY-2030-CV

Pressure Indicator - Single or Dual - DMY-2017-Light / DMY-2017

Universal Process Controllers - Dual Loop - DCY-2050 / DCY-2050-F / DCY-2051 / DCY-2051-F /

3 Elements Digital Controller for Boiler Level - DCY-2050-LC / DCY-2051-LC / DCY-2060-LC

Auto/Manual Station - DCY-2058 / DCY-2059

Pressure Controller - DCY-2057

Pressure to Current Converter (P/I) - TY-1110-DIN

Eletropneumatic Converter (I/P) Weather-proof - TY-1125-TEM

VIRTUAL RECORDER / DATA LOGGER

Multi-Loop Data-Logger Module - DMY-2015-DLY / TY-2095-DLY

Models available for:

- 12 VOLTAGE INPUTS 1-5 Vdc.

*Only available for DMY-2015-PB model.

Case Protection Grade

* Available only for DMY-2015 model

Case Protection Grade

Input frequency up to 30 kHz, from 300 mVpp to 30 Vpp.

Case Protection Grade

DMY-2030 / 2011 / 2035 / 2036:

Two universal inputs for RTD, TC, mV, 4-20 mA,

DMY-2030F / 2011F / 2035F / 2036F:

Two frequency inputs up to 30 kHz, from 300 mVpp

High visibility displays.

Configuration stored in non-volatile memory.

Many optional modules are available:

Simultaneous display of channels on models

2030 - Universal Inputs

Same code as Output 1

Same code as Output 3

1 - 75 to 264 Vac 50/60 Hz or 100 to 360 Vdc (any

Case Protection Grade

310 x 310 x 200 mm (HxWxD)

1 - 75 to 264 Vac 50/60 Hz or 100 to 360 Vdc (any

Case Protection Grade

General Usage, protected place

8-digit configurable display.

2030-TOT: mA, Vdc and mV inputs

75 to 264 Vac 50/60 Hz or 100 to 360 Vdc (any polarity)

Case Protection Grade

General usage, protected place

310 x 310 x 200 mm (HxWxD)

Process Counter DUAL

Aspersion-proof Front-panel (optional).

Same code as Output 1

Same code as Output 3

Case Protection Grade

Universal Process Indicator

10V / 100mA power supply for load cell.

Same code as Output 2