Food & Beverage Stewarding Manual

Food & Beverage
STEWARDING MANUAL
CHIEFS MANUAL & SOPS
Index
F&B Manual, Kitchen Section 5 (Stewarding)
Part 1, Guidelines for Chief
Ware washing and Decoy System

Scraping and Racking
Dishwashing Machine and its operations and
chemical usage
Part 2, Equipment cleaning
Steward Machine / Equipment Cleaning

Procedures and all utensils, crockery and
cutlery cleaning
Dos and Donts
Part 3, Sops for stewards
SOPs
Part I
Guidelines for Chief Steward
WARE WASHING - GENERAL OPERATING CHARACTERISTIC

A good ware washing operation not only turns out clean china and glassware, but
does it with maximum efficiency. The operation as a whole starts with the
transporting of soiled tableware, delivery to the stewarding area, and scrapping and
racking in preparation for washing. Only if all of these procedures are properly
handled can the total ware washing function be considered efficient.
Scrapping, sorting & the Decoy system
a.
Personnel should be trained to do an initial sorting of glasses and dishes onto
the stewarding table. If the tableware is dumped everywhere and any way onto the
stewarding table, there will be breakage, and loss of space.
b.
In the so-called decoy system, dirty tableware is placed on the stewarding dish
table grouped according to size and type. This allows the machine operator to rack
the dishes and glassware speedily when he has enough of the same size and type to
fill a rack. It is called the decoy system. The waiters therefore need to follow that
system, as they are the key people to ensure a smooth operation for stewarding takes
place. Decoys are especially valuable when training new personnel. In addition to
speeding up the racking of tableware, the decoy system greatly reduces breakage,
which on average costs 19 cents out of every ware washing.
c.
A refinement of the decoy system is to have overhead racks near the dish table
is full, the machine operator puts it through the machine, In other words, the waiter
racks the cups, and glasses, also bottles and teapots, as he removes them from the
serving tray, thereby saving an operation and also allowing for more production
through the dish machine. Further, the racks can be color coded for quick
identification.
Scrapping
Removal of loose soil from dishes, such as meat scraps, vegetables, etc., is necessary
before dishes are racked. A brush by hand (with a brush) across the plate as it picked
up to be racked takes no time at all, but makes a big difference in final result as well
as economy. Without scrapping, the wash solution in the dish machine quickly gets
loaded with soil, with many bad effects: heavy detergent use, clogged overflow,
clogged scrap trays, clogged wash jets, excessive foaming, and build up of lime
deposits in the machine. Scrapping should be done directly into garbage bins bearing
in mind the separation of the garbage.
Racking
a.
For the single-rack or rack conveyor dish machine, there is a correct rack and
a wrong rack for every piece of tableware. The correct rack is one that
provides full and uniform exposure to the tableware to the washing and rinsing
sprays in the dish machine, and protects the tableware against breakage. For
example, stemware, goblets and other tall glassware require racks with tall
partitions around each item. Cups require special racks to protect handles.
Cutlery requires a completely different type of racks. Trays and large platters
need their own type of rack. This requires having an inventory of racks of
different types. The trend today is to have all-plastic racks. They are
lightweight, rust proof, resistant to chemical, quiet and most of all, offer the
best protection against breakage. The supplier of the dish machine detergents
should be knowledgeable about the wide variety of racks available and be able
to recommend the proper inventory.
b.
Certain racks are specially made for placement on angled over shelves, which
are great space savers and tie in well with the decoy system. (we do not have
them, but are planning for future development)
c.
Where the decoy system is not used, personnel should be trained to rack
dishes of similar size and type in a rack, to avoid blocking smaller
dishes by larger dishes. Dishes should always be racked at a slant facing into
the dish machine. Cutlery should always be racked in its own type of special
rack, packed loosely with the eating end up.
The dish washing machine

The steward should have a good understanding of the principles of the dishwashing
machine operation, which plays such a important role in food service sanitation. The
National Sanitation Foundation has a guide for the field evaluation of the operation,
maintenance and installation of spray-type dish washing machines which should be
obtained for use as a reference. Following is a brief summary of the basic elements of
spray-type machine dishwashers. (Also a copy of the FTO guidelines is available at
chefs office for cross reference)
a.
Description of the dish washing machine
All spray-type dishwashing machines have two basic functions: to wash and distain
the dishes with a detergent solution, and to rinse off the solution. A machine may
have additional stages - a flush, a pre-wash, a pre-rinse -- but essentially all are twostep machines, washing and rinsing.
All of the larger machines, with which we are concerned, operate on a conveyor
system for transporting the tableware through the machine. On some types, the
tableware is placed in racks which are placed on a conveyor. In others, known as the
flight type, the tableware is placed directly on the conveyor, which is constructed to
hold the tableware. (not applicable to us)
Lets follow a rack of dishes through a machine with the four stages: a pre-wash,
wash, pre-rinse and final rinse. In the pre-wash, sprays of hot water or hot detergent
solution, re-circulated by the pump, remove most of the easy soil from the dishes.
The washed off soil, mostly greasy in nature, floats to the top of the solution in the
tank and is removed through an overflow pipe.
When the rack reaches the wash stage, the process is repeated. In this stage, all of the
soil and stains should be completely removed. Then the dishes will be taken into the
pre-rinse stage, where sprays of hot water remove most if not all of the washing
solution.
In the final rinse stage any remaining wash solution is removed. The rinse water in
this stage is hot enough (180 - 190) to act as a sanitizer, killing bacteria. A rinse
additive is also injected into the final rinse water to provide a sheeting effect, for
quick drying and to prevent water spotting.
The spraying action in each stage is engineered to provide complete, uniform
coverage through the use of rotating wash arms and rinse arms containing the spray
nozzles.
b.
Operational elements affecting dishwashing machine results.

A good dishwashing machine operation is based on five elements: time,
temperature, pressure, detergent and rinse additive.
TIME : Obviously, the longer a dish is exposed to the wash and rinse sprays,
the more certain it is to come out clean. However, for maximum production, a
shorter time might be required during peek hours. It is up to the dish wash
controller to determine the best time. The recommendation of the machine
manufacturer and the detergent supplier will usually take care of this element.
Still, the steward should know that when unusual demands are made on a
machine for extra production, it may be possible to speed up the speed and
still get good results by also increasing temperatures, pressure and detergent
concentration. But this might also increase the cost of washing per dish.
TEMPERATURE: Hot water is expensive, but cold water can cost even
more if it results in poor results. With every degree of added heat the cleaning
efficiency of a detergent solution is increased. Dishwashing machines are
equipped with thermometers, which should be marked off at the desired
temperature for the particular stage. Tank heaters supplied with a machine
may not be adequate to maintain temperature at periods of peak production. If
necessary, a booster heater should be installed and hot water lines insulated.
Chief Steward to inform in such case.

Food & Beverage Stewarding Manual

Uploaded by

Copyright:

Available Formats

Food & Beverage Stewarding Manual

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Food & Beverage Stewarding Manual

Uploaded by

Copyright:

Available Formats

Food & Beverage

Ware washing and Decoy System

Part 2, Equipment cleaning

Steward Machine / Equipment Cleaning

Part 3, Sops for stewards

WARE WASHING - GENERAL OPERATING CHARACTERISTIC

The dish washing machine

Operational elements affecting dishwashing machine results.

You might also like