Streaming Files

Copyright 2011 Gemcom Software International Inc.
(Gemcom)
All rights reserved. Gemcom publishes this documentation for the sole use of Gemcom licensees.
Without written permission, you may not sell, reproduce, store in a retrieval system, or transmit
any part of this documentation. For such permission, or to obtain extra copies please contact your
local Gemcom office, or visit www.gemcomsoftware.com.
This software and documentation is proprietary to Gemcom and, except where expressly provided
otherwise, does not form part of any contract. Changes may be made in products or services at
any time without notice.
While every precaution has been taken in the preparation of this manual, neither the authors nor
Gemcom assumes responsibility for errors or omissions. Neither will be held liable for any damages
caused or alleged to be caused from the use of the information contained herein.
Gemcom Software International Inc., Gemcom, the Gemcom logo, combinations thereof, and
GEMS, Surpac, Minex, MineSched, Whittle, PCBC, Gemcom InSite, and Gemcom Hub are
trademarks of Gemcom Software International Inc. or its wholly-owned subsidiaries.
Product
Surpac 6.3
Table of Contents
Introduction
Overview
Requirements
Workflow
Set up for this tutorial

Setting the work directory
5
5
Task: Set the work directory (Windows XP)
Task: Set the work directory (Windows Vista and Windows 7)
Creating a streaming file
Task: Display the data set in Graphics
Task: Export a streaming file
Viewing a streaming file in HTML
Task: View the HTML file
Task: View the data
Inserting and viewing a streaming file in Word
10
Task: Insert a streaming file in Word 2003
10
12
17
Task: View a streaming file in Word
22
Task: Save a streaming file in Word
22
Inserting and viewing a streaming file in PowerPoint
23
Task: Insert a streaming file in PowerPoint 2003
23
25
28
Task: View a streaming file in Powerpoint
32
Task: Save a streaming file in PowerPoint
32
Introduction
Introduction
Overview
You can use streaming files to present three-dimensional data in various Microsoft products, such as
Word, PowerPoint, and Internet Explorer. The procedures you can use to implement streaming files
in these products vary depending on the version.
When you embed the streaming file into one of the Microsoft products, you can use visualisations
such as real-time rotation and zooming
Requirements
Prior to proceeding with this tutorial, you will need:
l
l
Surpac v6.1 or later installed

The streaming files data set
Workflow
Note: This workflow demonstrates the steps in this tutorial. There are other ways to view
streaming files.
Surpac 6.3
Page 4 of 32
Streaming Files

Setting the work directory
1. In the Surpac Navigator, right-click the streaming_files folder.
2. On the shortcut menu, select Set as work directory.
The name of the work directory is displayed in the title bar at the top of the Surpac
window.
Surpac 6.3
Page 5 of 32
Streaming Files

1. In the Surpac Navigator, right-click the streaming_files folder.
2. On the shortcut menu, select Set as work directory.
The name of the work directory is displayed in the title bar at the top of the Surpac
window.
Surpac 6.3
Page 6 of 32
Streaming Files

1. Open project.swa.
DTMs and string files are displayed.
Task: Export a streaming file

1. Choose File > Save to Stream Control.
2. Enter the information as shown, and then click Apply.
Note: Two files are created in the working directory design.hsf and design.html.
Surpac 6.3
Page 7 of 32
Streaming Files

1. In Windows Explorer, browse to the working directory, and open design.html in Internet
Explorer.
An Internet security warning will appear on the page.
2. Click on the warning bar and select Allow Blocked Content... .
The Security Warning dialog box is displayed.
3. Click Yes.
The control is displayed in the page.
Note: If you have not previously installed the Gemcom Software Stream Control, you
will be prompted to download and install the control on your machine. After you have
installed the Gemcom Software Stream Control you will see it displayed in the page.
4. Right-click on the control and select Open... .
5. Navigate to the design.hsf file.

6. Click Open.
The streaming file is displayed.
Surpac 6.3
Page 8 of 32
Streaming Files
Task: View the data
Task: View the data
1. Click and drag in the viewport to spin the data in three dimensions.
2. Right-click anywhere on the image, and a shortcut menu is displayed:
3. Select Zoom to Window, and then click and drag in the viewport to zoom the data.
Some options, such as Shadow, are toggle functions.
The Window Color option allows you to set different background colours for the upper
and lower halves of the viewport.
Tip: To zoom out, select Reset Camera.
Surpac 6.3
Page 9 of 32
Streaming Files

1. Open a new or existing Word document.
2. Position the cursor where you want to insert the file.
3. Choose Insert > Object.
The Object form is displayed.
4. Select Gemcom Software Stream Control, and click OK.

The control is inserted into the document.
5. Right-click on the control and select GemcomSoftware Stream Control Object > Properties.
The Gemcom Software Stream Control Properties form opens.

6. Browse to the design.hsf file, and click Open.
7. Select Embed, and click OK.
Surpac 6.3
Page 10 of 32
Streaming Files
Note: The Microsoft Visual Basic window opens automatically.

8. Choose Run > Run Sub/UserForm, or press F5.
9. Close the Visual Basic window.

The design.hsf file is displayed in the Word document.
Surpac 6.3
Page 11 of 32
Streaming Files

1. Open a new or existing Word document.
2. Position the cursor where you want to insert the file.
3.
4.
5.
6.
Surpac 6.3
Click the Office

button, and then click Word Options.
Click Trust Center.
Click Trust Center Settings, and click ActiveX Settings.
Complete the form as shown, and click OK.
Page 12 of 32
Streaming Files
7. Click OK.
8. Click the Office
button, and click Word Options.
9. In the Word Options form, click Popular.
10. Select Show Developer tab in the Ribbon, and click OK.
Surpac 6.3
Page 13 of 32
Streaming Files
11. Click the Developer tab.

12. In the Controls group, click Legacy Tools
, and click More Controls.
13. On the More Controls form, select Gemcom Software Stream Control, and click OK.
Surpac 6.3
Page 14 of 32
Streaming Files
Note: A draw box is displayed in your Word document.

14. Click on the draw box , right-click and choose Gemcom Software Stream Control Object
> Properties.
15. Browse for design.hsf, and click Open.

Surpac 6.3
Page 15 of 32
Streaming Files


Surpac 6.3
Page 16 of 32
Streaming Files

1.
2.
3.
4.
5.
6.
Surpac 6.3
Open a new or existing Word document.

Position the cursor where you want to insert the file.
ChooseFile > Options.
Click Trust Center.
Page 17 of 32
Streaming Files
7. Click Customize Ribbon.

8. In the Main Tabs list, select the Developer check box, and click OK.
9. Click the Developer tab.
Surpac 6.3
Page 18 of 32
Streaming Files
10. In the Controls group, click Legacy Tools
, and then click More Controls.
Note: A draw box is displayed in your Word document.

12. Click on the draw box , right-click and choose Gemcom Software Stream Control Object
> Properties.
13. Browse for design.hsf and click Open.

Surpac 6.3
Page 19 of 32
Streaming Files


Surpac 6.3
Page 20 of 32
Streaming Files
Surpac 6.3
Page 21 of 32
Streaming Files

1. Right-click anywhere on the image to open the shortcut menu.
3. Select Orbit , and then click and drag in the viewport to rotate the data.
Tip: To zoom out, click Reset Camera.
Task: Save a streaming file in Word

1. Select the Save As command:
l In Word 2003 and 2010 choose File > Save As.
In Word 2007 click the Office
button, and select Save As > Word Document.
2. Navigate to the directory you want to save the file in and type the filename.
3. Click Save.
Note: You must embed the .hsf file to save it correctly in the Word document. If you
do not embed the file, and you share this document with another user, the .hsf file will
not load when the Word document is opened.
l
Surpac 6.3
Page 22 of 32
Streaming Files

1. Open a new or existing PowerPoint document.
2. Choose Insert > Object.
The Object form is displayed.
3. Select Gemcom Software Stream Control, and click OK.

The control is inserted into the document.
4. Right-click on the control and select GemcomSoftware Stream Control Object > Properties.
The Gemcom Software Stream Control Properties form opens.

5. Browse to the design.hsf file, and click Open.
Surpac 6.3
Page 23 of 32
Streaming Files
7. Choose Slide Show> View Show, or press F5.

The design.hsf file is displayed in the slide.
Surpac 6.3
Page 24 of 32
Streaming Files

1. Open an existing document, or create a new PowerPoint document.
2.
3.
4.
5.
Click the Office

button, and click PowerPoint Options.
Click Trust Center.
6. Click Popular.
7. Select Show Developer tab in the Ribbon, and click OK.
Surpac 6.3
Page 25 of 32
Streaming Files
8. Click on the Developer tab.

9. In the Controls group, click More Controls
.
11. Click and drag the pointer to draw a shape in your presentation.
Note: You can resize the display area by clicking on the draw box and resizing using the
drag arrows.
Surpac 6.3
Page 26 of 32
Streaming Files
12. Right-click and choose Gemcom Software Stream Control Object > Properties.
13. Browse to design.hsf file, and click Open.

15. Press F5.

Surpac 6.3
Page 27 of 32
Streaming Files

1.
2.
3.
4.
Surpac 6.3
Open an existing document, or create a new PowerPoint document.

Click Trust Center.
Page 28 of 32
Streaming Files
5. Click Customize Ribbon.

6. In the Main Tabs list, select the Developer check box, and click OK.
7. Click on the Developer tab.

8. In the Controls group, click More Controls
.
9. On the More Controls form, click Gemcom Software Stream Control, and then click OK.
Surpac 6.3
Page 29 of 32
Streaming Files
10. Click and drag the pointer to draw a shape in your presentation.
Note: You can resize the display area by clicking on the draw box and resizing using the
drag arrows.
11. Right-click and then choose Gemcom Software Stream Control Object > Properties.
12. Browse to design.hsf, and click Open.

Surpac 6.3
Page 30 of 32
Streaming Files
14. Press F5.

Surpac 6.3
Page 31 of 32
Streaming Files

1. Press F5.
2. Right-click anywhere on the image to open the shortcut menu.
4. Select Orbit , and then click and drag in the viewport to rotate the data.
Task: Save a streaming file in PowerPoint

1. Select the Save As command:
l In PowerPoint 2003 and 2010 choose File > Save As.
In PowerPoint 2007 click the Office
button, and select Save As > PowerPoint Presentation.
2. Navigate to the directory you want to save the file and type the filename.
3. Click Save.
Note: You must embed the .hsf file to save it correctly in the PowerPoint presentation.
If you do not embed the file, and you share this presentation with another user, the .hsf
file will not load when the PowerPoint presentation is opened.
l
Surpac 6.3
Page 32 of 32
Streaming Files

Streaming Files

Uploaded by

Copyright:

Available Formats

Streaming Files

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Streaming Files

Uploaded by

Copyright:

Available Formats

Copyright 2011 Gemcom Software International Inc.

Set up for this tutorial

Task: Set the work directory (Windows XP)

Task: Set the work directory (Windows Vista and Windows 7)

Creating a streaming file

Task: Display the data set in Graphics

Task: Export a streaming file

Viewing a streaming file in HTML

Task: View the HTML file

Task: View the data

Inserting and viewing a streaming file in Word

Task: Insert a streaming file in Word 2003

Task: Insert a streaming file in Word 2007

Task: Insert a streaming file in Word 2010

Task: View a streaming file in Word

Task: Save a streaming file in Word

Inserting and viewing a streaming file in PowerPoint

Task: Insert a streaming file in PowerPoint 2003

Task: Insert a streaming file in PowerPoint 2007

Task: Insert a streaming file in PowerPoint 2010

Task: View a streaming file in Powerpoint

Task: Save a streaming file in PowerPoint

Surpac v6.1 or later installed

Set up for this tutorial

Task: Set the work directory (Windows XP)

Set up for this tutorial

Set up for this tutorial

Task: Set the work directory (Windows Vista and Windows 7)

Task: Set the work directory (Windows Vista and Windows 7)

Creating a streaming file

Task: Display the data set in Graphics

Creating a streaming file

Task: Export a streaming file

Viewing a streaming file in HTML

Task: View the HTML file

Viewing a streaming file in HTML

The Security Warning dialog box is displayed.

5. Navigate to the design.hsf file.

Viewing a streaming file in HTML

Task: View the data

Task: View the data

Inserting and viewing a streaming file in Word

Task: Insert a streaming file in Word 2003

Inserting and viewing a streaming file in Word

4. Select Gemcom Software Stream Control, and click OK.

The Gemcom Software Stream Control Properties form opens.

Inserting and viewing a streaming file in Word

Task: Insert a streaming file in Word 2003

Note: The Microsoft Visual Basic window opens automatically.

9. Close the Visual Basic window.

Inserting and viewing a streaming file in Word

Task: Insert a streaming file in Word 2007

Task: Insert a streaming file in Word 2007

Click the Office

Inserting and viewing a streaming file in Word

Task: Insert a streaming file in Word 2007

Inserting and viewing a streaming file in Word

Task: Insert a streaming file in Word 2007

11. Click the Developer tab.

, and click More Controls.