Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 298 views

    EDG Test

    Uploaded by

    yogacruise
    This document provides a test procedure for commissioning the emergency diesel generator (EDG) at the PLTU Kendari Unit 3 power plant project. The procedure includes: 1) Visual inspection and individual testing of the EDG body and local control panel to check for cleanliness, cable connections, and controller operation. 2) Local start/stop testing of the EDG by manually starting it from the local control panel, checking no-load voltage and phase sequence, and recording parameter values. 3) Risk and safety precautions for high voltage testing, including using safety gear and barricading test areas.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    EDG Test

    Uploaded by

    yogacruise
    298 views6 pages
    This document provides a test procedure for commissioning the emergency diesel generator (EDG) at the PLTU Kendari Unit 3 power plant project. The procedure includes: 1) Visual inspection and individual testing of the EDG body and local control panel to check for cleanliness, cable connections, and controller operation. 2) Local start/stop testing of the EDG by manually starting it from the local control panel, checking no-load voltage and phase sequence, and recording parameter values. 3) Risk and safety precautions for high voltage testing, including using safety gear and barricading test areas.

    Original Description:

    EDG test

    Original Title

    EDG Test

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides a test procedure for commissioning the emergency diesel generator (EDG) at the PLTU Kendari Unit 3 power plant project. The procedure includes: 1) Visual inspection and individual testing of the EDG body and local control panel to check for cleanliness, cable connections, and controller operation. 2) Local start/stop testing of the EDG by manually starting it from the local control panel, checking no-load voltage and phase sequence, and recording parameter values. 3) Risk and safety precautions for high voltage testing, including using safety gear and barricading test areas.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    298 views6 pages

    EDG Test

    Uploaded by

    yogacruise
    This document provides a test procedure for commissioning the emergency diesel generator (EDG) at the PLTU Kendari Unit 3 power plant project. The procedure includes: 1) Visual inspection and individual testing of the EDG body and local control panel to check for cleanliness, cable connections, and controller operation. 2) Local start/stop testing of the EDG by manually starting it from the local control panel, checking no-load voltage and phase sequence, and recording parameter values. 3) Risk and safety precautions for high voltage testing, including using safety gear and barricading test areas.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 6

    EDG Test Procedure

    Page 1 of 7

    HK-E-HV701

    Document Class

    PT. HUTAMA KARYA (Persero)


    EPC DIVISION
    JOB. No. HV701

    For Commissioning

    Revised as comment

    Revised as comment

    For approval

    Sep. 08,
    2015

    Ayhu

    Rev.

    Description

    Date

    Prepared Checked Reviewed Approved

    Tirda

    Tirda

    OWNER`S
    DWG.NO

    PT. PLN (PERSERO)


    JASA SERTIFIKASI

    Clients Project No.

    DWG. NO.

    E07007-PR-TM-3007

    PLTU KENDARI UNIT 3 1x10 MW

    DATE OF ISSUED

    REVISION NO.

    Sep.08, 2015

    Yoga

    PLTU Kendari Unit 3 (110 MW) Project


    EDG Test Procedure

    REV 0

    HK-E-HV701

    Page 2 of 7

    Commissioning Procedure

    Table of Contents

    1
    2
    3
    4
    5
    6
    7
    8
    9

    COVER
    SCOPE
    OBJECTIVE
    REFERENCE
    TEST INSTRUMENT
    RISK AND SAFETY PRECAUTION
    BUSBAS PROTECTION TEST ITEM
    BUSBAS PROTECTION PROCEDURE
    ATTACHEMENT

    1
    2
    3
    3
    3
    3
    3
    3
    3

    PLTU Kendari Unit 3 (110 MW) Project


    EDG Test Procedure

    REV 0

    HK-E-HV701

    Page 3 of 7

    Commissioning Procedure

    1.

    Title
    EDG Test Procedure

    2.

    Scope
    EDG body, local panel of EDG, incoming switch 0.4Kv protection.

    3.

    Objective
    This is to assure that the requirements of electrical individual test works c1re
    meets the codes requirements and contract specifications. To make sure, the
    works are carried out in acceptable workmanship and follow requirements
    in the quality manual.

    4. Reference
    a) HK/SDMIEC Quality manual
    b) Applicable manufacture manual/standard
    c) Design drawing provided by Design Institute ZT-F201115S-D0201-03
    (2/3)

    5. Test Instrument

    Fluke 17B
    Secondary Phase Sequence Tester
    DC Resistance Tester
    Insulation Resistance Tester
    Relay Tester.

    6. Risk and Precaution


    a.
    b.
    c.
    d.

    Everyone must be wear safety


    High voltage test area should be circle by rail with warning board.
    If happen anything abnormal, testing must be stop
    Clean all instrument and tools

    PLTU Kendari Unit 3 (110 MW) Project

    EDG Test Procedure

    REV 0

    HK-E-HV701

    Page 4 of 7

    Commissioning Procedure

    7.

    EDG Test Item

    Visual inspection
    Individual Test of EDG.
    Local Stop/Start EDG
    Local Protection

    8.

    EDG Test Procedure

    8.1.1

    Visual Inspection.
    Check name plate of each protection and write down.

    8.1.2

    Individual Test of EDG.

    8.1.3

    Test of EDG body


    1.Measure of EDG DC resistance value between each phase 1%
    2.Measured the insulation resistance of EDG winding to ground.
    Insulation resistance shall > 5 M.

    Test of EDG local control system


    1.Checked that inside and outside of EDG control panel are clean.
    2.Cable connection of row terminal in EDG control panel is good.
    3.Supply power normal work for EDG controller.
    4.Simulated normal current, voltage and frequency by protection tester.
    5.Checked following fault whether controller action is correct.

    Local start/stop of EDG

    Put operation, alarm, signal power switch into operation.


    Manually start EDG locally.
    Regulated voltage of EDG make it run and no load voltage of 400V
    Check whether EDG outlet phase sequence is correct.
    Checked and record following value after EDG run normally.

    PLTU Kendari Unit 3 (110 MW) Project


    BUSBAS PROTECTIONTest Procedure

    REV 0

    HK-E-HV701

    Page 5 of 7

    Commissioning Procedure

    9.

    .
    Manually stop EDG locally.
    Manually start and stop EDG local 3 times. Checked the battery capacity.

    ATTACHEMENT
    Test form
    Calibration date of equipment test
    Drawing Equipment

    You might also like