Ric-Lc

Product page >
Data Sheet
RIC-LC
Ethernet Converter for Bonded PDH Circuits
Delivery of Ethernet traffic over up to 16 bonded E1 ports using Ethernet over NG-PDH
protocols
VLAN tagging and stacking for full separation of Ethernet user traffic from management
data
Monitoring and diagnostic tools for quick fault isolation on TDM and Ethernet ports
TDM-to-Ethernet fault propagation
Extensive management capabilities including local and remote (inband and out-of-band)
options
RIC-LC is a Fast Ethernet over E1 converter

that provides simple, efficient and
cost-effective Fast Ethernet connectivity
over one, four, eight or sixteen bonded E1
circuits. The device enables service
providers to supply high-capacity Ethernet
services to remote locations and
transparently connect corporate LANs
over existing E1 links.
RIC-LC supports standard Next Generation
Ethernet over PDH protocols including GFP
ITU-T G.8040, VCAT ITU-T G.7043 and
LCAS ITU-T G.7042. These protocols allow
service providers to dynamically allocate
bandwidth to their customers by mere
changing the number of links bonded to
the virtual group, without stopping the
service.
MARKET SEGMENTS AND
APPLICATIONS
RIC-LC targets cost-sensitive applications
for carriers, mobile operators and service
providers, such as transparent inter-LAN
connectivity, Ethernet private lines, as well
as IP DSLAM, WiMAX base station and
cellular backhaul.
ETHERNET
VLAN tagging and stacking
VLAN tagging and stacking at ingress and
egress enable transporting user traffic
transparently, keeping all the user VLAN
settings intact. Management traffic and
user Ethernet traffic are sent together on
the same Ethernet flow and can be
separated by different VLANs, thus

ensuring high traffic security.
Quality of Service (QoS)
RIC-LC supports VLAN-aware and VLAN
unaware bridging, as well as VLAN stacking
(Q-in-Q). It maps Ethernet frames into
four priority queues based on user port,
VLAN priority (802.1p) or DSCP marking,
to enable differentiation between various
user applications. It uses both strict
priority and WFQ (weighted fair queuing),
as well as per port rate limitation.
Internal Bridge
The internal bridge can be configured to
filter or transparent mode. In filter mode,
the bridge learns MAC addresses and
filters local traffic accordingly. In
transparent mode it forwards the received
packets, ignoring the MAC addresses.
RESILIENCY
Fault Propagation
If a failure is detected on the E1 port, the
fault propagation mechanism deactivates
the Fast Ethernet links, enabling routers
and switches on both ends of the link to
reroute the traffic.
MANAGEMENT AND SECURITY
RIC-LC can be managed locally via an ASCII
terminal connected to RS-232.
Remote inband management is performed
via the E1 ports using Telnet, Web
browser or RADview, RADs SNMP-based
management system that ensure safe and
secure access control.
Out-of-band management is performed

via one of the user Ethernet ports.
ARCHITECTURE
RIC-LC is provided with two hardware
options:
Blue/white enclosure Internal widerange AC/DC power supply, 1-16 E1

ports
-
Extended temperature range

option
Extended temperature range

option for outdoor installation with
front-panel ground
Red enclosure External AC or DC

power supply (single E1 port only).
MONITORING AND DIAGNOSTICS

RIC-LC diagnostic capabilities include:
Ping test for checking IP connectivity
User-activated diagnostic loopback

tests on VCG or individual E1
generated using management
software or rear-panel DIP switch.
Loop Detection
E1 loops are immediately detected when
they occur, avoiding the resulting Ethernet
loops and Ethernet storms. The unit
automatically recovers when the TDM loop
clears.
RIC-LC
Applications
Figure 1. IP DSLAM and WiMAX Backhauling over PDH/SDH
Customer Premises
Central Office
PSN
4/8/16 x E1
RIC-LC
NMS
ADM
ADM
LAN
Figure 2. Extending Ethernet Services over Multiple E1 Circuits
4x10/100BaseT
4/8/16 x E1
SDH/SONET
RIC-LC
LAN
Data Sheet
Specifications
CAPACITY
Number of VCGs
1
Note: It is strongly recommended to order this

device with original RAD SFPs installed. This will
ensure that prior to shipping, RAD has performed
comprehensive functional quality tests on the
entire assembled unit, including the SFP devices.
RAD cannot guarantee full compliance to product
specifications for units using non-RAD SFPs.
E1 INTERFACE
Number of Ports
1, 4, 8 or 16
Compliance
ITU-T Rec. G.703, G.706, G.732, G.823
Data Rate
2.048 Mbps, framed
Line Code
HDB3
Line Impedance
120, balanced
75, unbalanced
System Clock
Internal or loopback timing
Connector
RJ-45, balanced
BNC, unbalanced (1-, 4- or 8-port options;
16-port units are supplied with RJ-45
to BNC adapter cable)
ETHERNET INTERFACE
Number of Ports
4
Type
10/100 Mbps, full/half duplex
Connector
RJ-45 for electrical (100BaseTx)
LC (SFP-based) for optical (100BaseFx)
Max Frame Size
2036 bytes
Compliance
Relevant sections of IEEE 802.3, 802.3u
and 802.1p&q
INTERNAL BRIDGE
Operation Mode
VLAN-aware, VLAN-unaware
MAC Table Size
1024
Filtering and Forwarding
Transparent or filtered
Port-Based VLAN
Untagged, tagged
Number of VLANs
64
VLAN Range
14094
Port Combinations
4 built-in electrical
2 built-in electrical + 2 fiber optic (SFP)
L2CP Handling
Transparent
SFPs
For full details, see the SFP Transceivers
data sheet at SFP/XFP Compatibility.
TERMINAL CONTROL PORT

Type
RS-232C/V.24 (DCE asynchronous)
Data Rate
115.2 kbps
Connector
Mini USB, female
DIAGNOSTICS
Loopbacks
VCG, E1
Connectivity Test
Ping
GENERAL
Indicators
PWR (green) Power status
TST (orange) - Self-test status
ALM (red) Alarm status
Note: TST and ALM LEDs are available only in the
enclosure with internal power supply
Power
Internal wide-range power supply:
AC/DC: 100 to 240 VAC or 48 to 60 VDC
External power supply:
AC: 100 to 240 VAC
DC: 48 to 60 VDC
Power Consumption
AC: 6W
DC: 5W
Physical
Enclosure with internal power supply:
Height: 43.7 mm (1.7 in)
Width: 220 mm (8.6 in)
Depth: 170 mm (6.7 in)
Weight: 0.5 kg (1.1 lb)
Enclosure with external power supply:
Height: 43.5 mm (1.71 in)
Width: 210.3 mm (8.28 in)
Depth: 136 mm (5.35 in)
Weight: 0.6 kg (1.2 lb)
Environment
Temperature: 0 to 50C (32 to 122F)
Humidity: Up to 90%, noncondensing
Data Sheet
RIC-LC
Please contact your local RAD partner for

additional configuration options
RECOMMENDED CONFIGURATIONS
RIC-LC_IND/4E1/4UTP
4E1 ports and 410/100BaseT UTP ports,
outdoor installation
RIC-LC_IND/8E1/4UTP
outdoor installation
SUPPLIED ACCESSORIES
AC power cord
OPTIONAL ACCESSORIES
DC connection kit
RIC-LC_IND/16E1/4UTP
16E1 ports and 410/100BaseT UTP
ports, outdoor installation
RM-33-2
Hardware kit for mounting one or two
units in a 19-inch rack
RIC-LC/4E1/4UTP/ETR
extended temperature range
RM-47
Hardware kit for mounting one or two
units of RIC-LC/E1 in a 19-inch rack
RIC-LC/8E1/4UTP/ETR
extended temperature range
ST-35
Stacking tray for up to three plastic RIC-LC
internal power supply units
RIC-LC/E1/4UTP
Single E1 and 410/100BaseT UTP ports
RIC-LC/4E1/4UTP
4E1 ports and 410/100BaseT UTP ports
RIC-LC/8E1/4UTP
8E1 ports and 410/100BaseT UTP ports
RIC-LC/16E1/4UTP
16E1 ports and 410/100BaseT UTP
ports
CBL-RJ45/2BNC/E1
RJ-45 to BNC adapter cable (if a 16-E1
port unit with unbalanced interfaces is
ordered)
CBL-K21-EURO
DC surge protection cable (required for
outdoor installation)
CBL-K21-OPEN
RIC-LC/ACEX/E1/1UTP
Single E1 and 110/100BaseT UTP port,
external AC power supply
RIC-LC/ACEX/E1/4UTP
external AC power supply
AC surge protection cable, 2m, open end

(required for outdoor installation)
CBL-MUSB-DB9F
Mini USB control port cable
RIC-LC/DCEX/E1/4UTP
external DC power supply
International Headquarters
24 Raoul Wallenberg Street
Tel Aviv 69719, Israel
Tel. 972-3-6458181
Fax 972-3-6498250, 6474436
E-mail market@rad.com
www.rad.com
North America Headquarters

900 Corporate Drive
Mahwah, NJ 07430, USA
Tel. 201-5291100
Toll free 1-800-4447234
Fax 201-5295777
E-mail market@radusa.com
Order this publication by Catalog No. 803912
411-100-04/16 (2.0) Specifications are subject to change without prior notice. 19882016 RAD Data Communications Ltd. RAD products/technologies are protected by registered patents. To review specifically
which product is covered by which patent, please see ipr.rad.com. The RAD name, logo, logotype, and the product names MiNID, Optimux, Airmux, and IPmux, are registered trademarks of RAD Data Communications
Ltd. All other trademarks are the property of their respective holders.
SPECIAL CONFIGURATIONS
Ordering

Ric-Lc

Uploaded by

Copyright:

Available Formats

Ric-Lc

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Ric-Lc

Uploaded by

Copyright:

Available Formats

Product page >

RIC-LC is a Fast Ethernet over E1 converter

separated by different VLANs, thus

Out-of-band management is performed

Blue/white enclosure Internal widerange AC/DC power supply, 1-16 E1

Extended temperature range

Extended temperature range

Red enclosure External AC or DC

MONITORING AND DIAGNOSTICS

Ping test for checking IP connectivity

User-activated diagnostic loopback

Figure 1. IP DSLAM and WiMAX Backhauling over PDH/SDH

Figure 2. Extending Ethernet Services over Multiple E1 Circuits

Note: It is strongly recommended to order this

TERMINAL CONTROL PORT

Please contact your local RAD partner for

AC surge protection cable, 2m, open end

North America Headquarters

Order this publication by Catalog No. 803912

You might also like