En 47
En 47
En 47
EN47 spring steel stockholders and suppliers, delivering to the whole of the UK. West Yorkshire Steel
are suppliers of EN47 chromium vanadium type spring steel supplied in the as rolled condition. EN47 is
suitable for oil hardening and tempering. When used in the oil hardened and tempered condition EN47 spring
steel combines spring characteristics with good wear and abrasion resistance. When hardened EN47 offers
excellent toughness and shock resistance which make it a suitable alloy spring steel for parts exposed to
stress, shock and vibration.
We welcome export enquiries for spring steel. Contact our sales office and consult our shipping policy for further
details.
Related Specifications
BS970 735A50 735A51 1.8159 AISI 6150 50CrV4 50CV4 ASTM A829
CS70 | CS80 | CS95 | CS100 | EN42 | EN43 | EN45 | 735A50 | 6150 | 301
Form of Supply
Suppliers of round bar we can offer diameters in EN47 sawn to your required lengths as 1 offs or multiple cut
pieces. Ground steel bar can be supplied, providing a high quality precision ground spring steel bar to tight
tolerances.
Diameter
Applications
EN47 is used widely in the motor vehicle industry and many general engineering applications. Suitable for
applications that require high tensile strength and toughness. Typical applications include crankshafts, steering
knuckles, gears, spindles and pumps.
Analysis
Forging
Preheat the steel carefully, then raise temperature to 1050C for forging. Do not forge below 840C. After forging
EN47 spring steel cool slowly, preferably in a furnace.
Annealing
Hardening
Heat slowly to 650-700C and thoroughly soak. Continue to heat the steel to the final hardening temperature of
830-860C and allow the component to be heated through. Quench in oil.
Tempering
Temper the EN47 spring steel component immediately after quenching whilst tools are still hand warm. Re-heat to
the tempering temperature then soak for one hour per 25 millimetre of total thickness (2 hours minimum) Cool in
air. For most applications tempering of this grade will be between 400-600C.
Heat Treatment
Heat treatment temperatures, including rate of heating, cooling and soaking times etc. will vary due to factors such
as the shape and size of each component. Other considerations during the heat treatment process include the type
of furnace, quenching medium and work piece transfer facilities. Please consult your heat treatment provider for full
guidance on heat treatment of EN47.
Welding
We recommend you contact your welding consumables supplier who should provide you full assistance and
information on welding EN47 chrome vanadium spring steel.
Certification
Spring steel EN47 is a chrome vanadium grade commonly supplied as rolled and available with cast and analysis
certification, please request when placing any orders.
EN47 spring steel is supplied in accordance with our ISO 9001 : 2008 registration.