Home
Home
Home
Smart Phone
ABSTRACT
The main aim of the project is to control multiple electrical loads remotely over internet falling
under the basic principles of Internet of Things-IOT. For this real-time scenario we use an
Android app on any smart cell phone with user configurable front end (GUI).
The Internet of Things (IoT) is the network of physical objectsdevices, vehicles, buildings and
other itemsembedded with electronics, software, sensors, and network connectivity that
The data sent from the cell phone upon touch commands are sent through allotted IP fed to it, to
any nearby wireless modem which is then received by a Wi-Fi module interfaced to a
microcontroller of 8051 series, under TCP IP via networked wireless modem environment.
Relays are then driven as per the command received at the controller end to handle electrical
loads. The real time data is also seen at the sending end upon a LCD display interfaced to the
The power supply consists of a step down transformer 230/12V, which steps down the voltage to
12V AC. This is converted to DC using a Bridge rectifier and it is then regulated to +5V using a
voltage regulator 7805 which is required for the operation of the microcontroller , 3.3 volt for the