FLYWHEEL HORSEPOWER

134 kW 179 HP @ 2050 rpm

OPERATING WEIGHT
26900 27810 kg 59,300 61,310 lb
BUCKET CAPACITY
1.26 m3 1.65 yd3

PC270-7
PC
270

Photo may include optional equipment.

HYDRAULIC EXCAVATOR
 PC270-7 H Y D R A U L I C E X C A V A T O R HYDRAULIC EXCAVATOR
PC270-7 0

WALK-
PC270-7 AROUND
Hydraulic Excavator Harmony with Environment
Low emission engine
A powerful turbocharged and air to air aftercooled Komatsu
FLYWHEEL HORSEPOWER
134 kW 179 HP @ 2050 rpm

OPERATING WEIGHT
SAA6D102E-2 provides 134 kW 179 HP. This engine meets EPA,
26900 27810 kg
EU and Japan Tier 2 emissions regulations, without sacrificing 59,300 61,310 lb
power or machine productivity.
Economic mode saves fuel consumption
BUCKET CAPACITY
Fuel Comsumption is reduced 16%
1.26 m3
Building on the technology and expertise (Compared with PC270-7 Active mode) Large Comfortable Cab 1.65 yd3
Komatsu has accumulated since its Low operation noise New PC270-7s cab volume
establishment in 1921, GALEO presents Easily recycled design is increased by 14%, offering
customers worldwide with a strong, an exceptionally roomy
distinctive image of technological innovation operating environment
and exceptional value. The GALEO brand will Highly pressurized cab with
be employed for Komatsus full lineup of air conditioner
advanced construction and mining Low noise design
equipment. Designed with high productivity, Low vibration with cab
safety and environmental considerations in damper mounting
mind, the machines in this line reflect FOG capable with optional
Komatsus commitment to contributing to bolt- on top guard
the creation of a better world. FOG has been renamed to OPG (Operator
Protective Guards) top guard level 2 by ISO
Genuine Answers for Land Easy Maintenance 10262.

and Environment Optimization Replacement interval is extended for engine See pages 6 and 7.
oil, engine oil filter and hydraulic filter
Remote mounted engine oil filter and
Productivity Features fuel drain valve for easy access
Water separator is standard equipment
High Production and
Low Fuel Consumption Easier radiator cleaning
Production is increased with Fuel tank capacity is increased
larger output during Active SCSH bushings on work equipment
mode while fuel efficiency extend lubricating interval from
is further improved. 100 hours to 500 hours
Maximum See page 8.
Drawbar Pull
is increased 9% offering
superb steering and slope
climbing performance.
Moreover, another 6% increase
is available with the optional
heavy duty travel motor.
(Compared with PC250-6)
Photo may include optional equipment.

Maximum Digging Bucket Breakout Force Is Higher Lifting Capacity Multi Function Color Monitor Excellent Reliability and Durability
Height is 10 m 32'10", Increased 23% PC270-7s lateral stability is Working mode selection system for High rigidity work equipment
a benefit in jobs requiring (Over the PC250-6) improved, lifting capacity also various types of work Sturdy frame structure
a longer reach. increased. Hydraulic pump oil flow adjustment system for
Arm Crowd Force Is Reliable Komatsu manufactured major components
See page 4. Increased 17% Swing Torque Is adjustment of oil flow for attachments
Highly reliable electronic devices
(Over the PC250-6) Increased 21% EMMS (Equipment Management Monitoring System)
(Over the PC250-6) See page 5.
See page 4. for ease of maintenance and management of the
See page 4. machine
2 3
See page 5.
 PC270-7 H Y D R A U L I C E X C A V A T O R HYDRAULIC EXCAVATOR
PC270-7 0
Multi-Function Color Monitor
PRODUCTIVITY FEATURES A newly developed Multi-Function Color Monitor has multiple of the attachment side discharge flow to provide smooth
functions, such as Working mode selection, hydraulic pump work equipment movement and compound operation
oil flow adjustment for matching to attachment, and with work equipment and attachment.
maintenance interval notice, etc.
Lifting Mode

High Production and Low Fuel Consumption Working Mode Selection

The Multi-Function Color Monitor has Active mode,
When the Lifting mode is selected,
lifting capacity is increased by
Economy mode, Lifting mode and Breaker operation mode. 7% by raising hydraulic pressure.
The increased output and fuel savings of the Komatsu Larger Digging Power Provides
SAA6D102E-2 engine result in increased production and Increased Production EMMS (Equipment
Working Mode Application Advantage
improved production per unit of fuel. Bucket digging force is increased by 23% and arm crowd Management
Maximum production/power
A Active mode Monitoring System)
force is increased by 17%(compared with PC250-6). Fast cycle times
Engine
E Economy mode Excellent fuel economy Monitor Function
The PC270-7 gets its exceptional power and work capacity Bucket Digging Force*: SAE 176 kN 17900 kgf 39,460 lb
Hydraulic pressure is Controller monitors engine oil level,
ISO 198 kN 20200 kgf 44,530 lb L Lifting mode
from a Komatsu SAA6D102E-2 engine. Output is 134 kW increased by 7% coolant temperature, battery charge
179 HP, providing increased hydraulic power and improved Arm Crowd Force*: SAE 136 kN 13900 kgf 30,640 lb Breaker Optimum engine rpm, and air clogging, etc. If controller
B
ISO 148 kN 15100 kgf 33,290 lb operation hydraulic flow
fuel efficiency. finds any abnormality, it is displayed on the LCD with code.
*Measured with Power Max function, 3045 mm 10'0" arm Hydraulic Pump Oil Flow Adjustment System Maintenance Function
Hydraulics
When installing attachments (breaker, crusher, etc.) and Monitor informs replacement time of oil and filters on LCD
Unique two-pump system ensures smooth compound Economy Mode when the replacement interval is reached.
B, A, or E mode is selected, it is possible to adjust engine and
movement of the work equipment. HydrauMind controls Economy mode is environmentally friendly. Fuel consumption hydraulic pump discharge flow to match attachment
both pumps for efficient engine power use. This system Trouble Data Memory Function
is reduced 16% (compared with PC270-7 Active mode) and characteristics. Selection is possible throughout the LCD
also reduces hydraulic loss during operation. Monitor stores abnormalities for effective troubleshooting.
production is equal to the PC250-6 Heavy-duty mode. (Liquid Crystal Display). This system also allows throttling

Larger Maximum Drawbar Pull Power Max Function

PC270-7s maximum drawbar pull is increased by 9% and
provides superb slope climbing performance.
This function temporarily increases digging force by 7% for Excellent Reliability and Durability
added power in tough situations.
The optional heavy duty travel motor gives a extra 6% increase. Undercarriage for 30-tone class
Maximum drawbar pull: 249 kN 25400 kgf 56,000 lb Automatic Travel Speed Since the undercarriage of PC300-7,
*(264 kN 26900 kgf 59,300 lb) Travel speed is automatically shifted from high to low which is one class larger, is used for
Drawbar pull/operating weight: 0.94 *(1.00) speed according to the pressure of the travel. PC270-7, it is very durable.
*with optional heavy duty travel motor High Rigidity Work Equipment
High Mid Low
(Compared with PC250-6) 5.5 km/h 4.1 km/h 3.0 km/h The arm and boom are strengthened to correspond to increasing
Travel Speed
3.4 mph 2.5 mph 1.9 mph bucket and arm digging forces. The arm and boom cross sectional
Drawbar pull
9% *with optional H/D *(4.5 km/h) *(3.3 km/h) *(2.8 km/h) strength are also increased 25% and 8% respectively. The boom and
increased travel motor *(2.8 mph) *(2.1 mph) *(1.8 mph) arm have large cross-sectional dimensions as well as continuous groove
welding, improving digging and side-contact strength.
Larger Lifting Capacity
Large Digging Height Sturdy Frame Structure
Since lateral stability is improved by use of undercarriage for
Grease Sealed Track provides excellent
PC300-7 and lifting mode is employed, lifting capacity is PC270-7s maximum digging height is 10 m 32'10", The revolving frame, center frame and undercarriage are designed
undercarriage durability
increased. facilitating jobs that require a longer reach, such as by using the most advanced three-dimensional CAD and FEM analysis
demolition and slope finishing. technology.
6.1 m 20' Reliable Components
Larger Swing Torque
All of the major machine components, such as engine, hydraulic pumps,
Swing torque is increased by 21% by increasing the swing
hydraulic motors and control valves, etc., are exclusively designed and
motor capacity. As a result, high swing performance is
manufactured by Komatsu.
obtained on slopes.
6.4 ton Highly Reliable Electronic Devices
4.6 m 15'

7.05 U.S. ton

Exclusively designed electronic devices have passed severe testing.
Controller Sensors
Connectors Heat resistant wiring Track Link with Strut
PC270-7 uses track links with
Metal guard rings protect all the hydraulic cylinders and improve reliability.
strut providing superb durability
4 5
 PC270-7 H Y D R A U L I C E X C A V A T O R HYDRAULIC EXCAVATOR
PC270-7 0

WORKING ENVIRONMENT Safety Features

Cab
FOG capable with optional bolt-
PC270-7 cab interior is spacious and provides a comfortable working on top guard.
environment
Wide Visibility

Large Comfortable Cab The right side window pillar has

been removed and the rear
pillar reshaped to provide better
Comfortable Cab
visibility. Blind spots have been
New PC270-7s cab volume is increased by 14%, offering an
decreased by 34%.
exceptionally comfortable operating environment. The large
cab enables full flat reclining of the seat back with headrest. Pump/engine room partition
prevents oil from spraying on
Pressurized Cab the engine if a hydraulic hose
With optional air conditioner, air filter and a higher internal air should burst.
pressure (6.0 mm Aq 0.2" Aq) prevent external dust from
Thermal and fan guards are
entering the cab.
placed around high-temperature

Low Noise Design parts of the engine and fan

drive.
Noise level is remarkably reduced, not only engine noise but
also noise when swinging and hydraulic relief. Steps with non-skid sheet
Photo may include optional equipment.
and large handrail. Steps with
Low Vibration with Cab Damper Mounting non-skid sheet provide anti-slip
PC270-7 uses new, improved multi-layer viscous mount Automatic Air Conditioner (optional) footing for maintenance.
system that incorporates longer stroke and the addition Seat with headrest
A 6,900 kcal air conditioner
of a spring. The new cab damper mounting combined reclined full flat Photo may include optional equipment.
is utilized. The bi-level
with strengthened left and right side decks aids vibration
control function keeps the
reduction at operator seat.
operator's head and feet
Multi-Position Controls
Vibration at floor is reduced from 120 dB (VL) to 115 dB (VL). cool and warm respectively.
The multi-position, pressure proportional control
dB (VL) is index for expressing size of vibration. This improved air flow
levers allow the operator to work in comfort
function keeps the inside of
while maintaining precise control. A double-slide
the cab comfortable
mechanism allows the seat and controllers to move Large Handrail
Rubber throughout the year.
together or independently, allowing the operator
Spring
to position the controllers for maximum
productivity and comfort.
Silicon Oil

Seat Sliding Amount: 340 mm 13.4",

increased 120 mm 4.7"
Sliding Thermal Guard and Non-skid Sheet
Skylight Window
Comparison of Riding Comfort
Conditions:
Cab Damper Traveling over obstacle
one side track Washable Cab Floormat
Mounting Traveling speed forward high
The PC270-7s cab floormat
Multi-Layer is easy to keep clean. The
Viscous Mount Floor Vibration gently inclined surface has a
flanged floormat and drainage
Pitch vertical direction on graph shows size of vibration.
holes to facilitate runoff.

Defroster Cab Frame Mounted Wiper Bottle Holder and

Magazine Rack
6 7
 PC270-7 H Y D R A U L I C E X C A V A T O R HYDRAULIC EXCAVATOR
PC270-7 0

MAINTENANCE FEATURES SPECIFICATIONS

Reducing Maintenance Costs
Easy Maintenance ENGINE SWING SYSTEM
Hydraulic Oil and Filter/Engine Oil and Filter
Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Komatsu SAA6D102E-2 Drive method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydrostatic
Komatsu designed the PC270-7 to have easy service access. Replacement Interval Extended Type . . . . . . . . . . . . . . . . . . . . Water-cooled, 4-cycle, direct injection Swing reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Planetary gear
We know by doing this, routine maintenance and servicing are The new high performance filters are used in the hydraulic Aspiration . . . . . . . . . . . . . . . . . . . . . . Turbocharged and aftercooled Swing circle lubrication . . . . . . . . . . . . . . . . . . . . . . . Grease-bathed
less likely to be skipped, which can mean a reduction in costly Number of cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Service brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic lock
circuit and engine. Hydraulic oil filter, engine oil, and Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 mm 4.02" Holding brake/Swing lock . . . . . . . . . . . . . . . . Mechanical disc brake
downtime later on. Here are some of the many service features engine oil filter element replacement intervals are significantly Stroke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 mm 4.72" Swing speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.5 rpm
found on the PC270-7. extended to reduce maintenance costs. Piston displacement . . . . . . . . . . . . . . . . . . . . . . . . . . 5.88 ltr 359 in3
Flywheel horce Power
SAE J1349 . . . . . . . . . . . . . . . . . . . 134 kW 179 HP @ 2050 rpm UNDERCARRIAGE
Easy Radiator Cleaning Comparison of Replacement Intervals unit: hours DIN 6270 . . . . . . . . . . . . . . . . . . . . . 134 kW 182 PS @ 2050 rpm
Clearance between radiator Governor . . . . . . . . . . . . . . . . . . . . . . . All-speed control, mechanical Center frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . X-frame
PC270-7 PC250-6
Track frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Box-section
and oil cooler is increased Meets 2001 EPA, EU, and Japan Tier 2 emission regulations.
Engine oil 500 250 Seal of track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sealed track
to facilitate radiator core Engine oil filter 500 250 Track adjuster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic
cleaning with an air nozzle. Hydraulic oil 5,000 5,000 Number of shoes (each side) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
HYDRAULICS
Hydraulic oil filter 1,000 500 Number of carrier rollers . . . . . . . . . . . . . . . . . . . . . . . . . 2 each side
Easy Radiator Cleaning
Type . . HydrauMind (Hydraulic Mechanical Intelligence New Design) Number of track rollers (each side) . . . . . . . . . . . . . . . . . . . . . . . . . 7
system, closed-center system with load sensing valves and
All Work Equipment Lubrication Intervals are pressure compensated valves COOLANT AND LUBRICANT
Water Separator is standard 500 Hours with SCSH Bushings (Excluding Bucket) Number of selectable working modes . . . . . . . . . . . . . . . . . . . . . . . 4
CAPACITY (REFILLING)
Main pump:
equipment, removing water Newly developed SCSH bushings are used on bucket and arm Type . . . . . . . . . . . . . . . . . . . . . Variable displacement piston type Fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 ltr 105.7 U.S. gal
mixed in fuel and preventing top bushing; end faces are injected with Tungsten Carbide. Pumps for . . . . . . . . Boom, arm, bucket, swing, and travel circuits Coolant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30.9 ltr 8.2 U.S. gal
Water
fuel system damage. All bushing lubrication intervals of work equipment are Maximum flow. . . . . . . . . . . . . . . . . . 450 ltr/min 119 U.S. gal/min Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24.0 ltr 6.3 U.S. gal
Separator Supply for control circuit . . . . . . . . . . . . . . . . . Self-reducing valve Final drive, each side . . . . . . . . . . . . . . . . . . . . . . 7.8 ltr 2.1 U.S. gal
extended from 100 hours to 500 hours (excluding the
Hydraulic motors: Swing drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.6 ltr 1.7 U.S. gal
bucket) reducing maintenance costs. Travel . . . . . . . . . . . . . . . 2 x axial piston motor with parking brake Hydraulic tank . . . . . . . . . . . . . . . . . . . . . . . . . . 143 ltr 37.8 U.S. gal
Easy Access to Engine Swing . . . . . . . . . . 1 x axial piston motor with swing holding brake
Oil Filter and Fuel Drain SCSH (Steel Copper Sinter Relief valve setting:
SCSH Bushing Implement circuits. . . . . . . . . . . . 37.3 MPa 380 kgf/cm2 5,400 psi
Valve. Engine oil filter and Hard Material) bushing is OPERATING WEIGHT (APPROXIMATE)
Remote Travel circuit . . . . . . . . . . . . . . . . 37.3 MPa 380 kgf/cm2 5,400 psi
fuel drain valve are remotely based on ferroalloy powder Operating weight including 5850 mm 19'2" one-piece boom,
Mounted Special Lubricants Swing circuit . . . . . . . . . . . . . . . . 28.4 MPa 290 kgf/cm2 4,125 psi
Engine Oil Filter mounted to improve metallurgy (carbonized Contained in Pores Pilot circuit. . . . . . . . . . . . . . . . . . . . . 3.2 MPa 33 kgf/cm2 470 psi 3045 mm 10'0" arm, SAE heaped 1.26 m3 1.65 yd3 backhoe bucket,
accessibility. Hydraulic cylinders: rated capacity of lubricants, coolant, full fuel tank, operator, and
treatment). It contains a special Cu (Copper)
standard equipment.
(Number of cylinders bore x stroke x rod diameter)
Easy Cab Filter Maintenance lubricant in pores, and the hard Boom . . . . . 2 140 mm x 1300 mm x 100 mm 5.5" x 51.2" x 3.9"
particles are diffused to Arm . . . . . . 1 150 mm x 1635 mm x 110 mm 5.9" x 64.3" x 4.3" PC270-7
Tool free removal of the internal and external cab filters. Bucket . . . . 1 140 mm x 1009 mm x 100 mm 5.5" x 39.7" x 3.9"
improve durability for wear Hard Particles Diffused Operating Ground
Shoes Weight Pressure
and scratching.
600 mm 26900 kg 55 kPa 0.56 kgf/cm2
DRIVES AND BRAKES 23.6" 59,300 lb 7.96 psi
Tungsten Carbide Injected Bushing
700 mm 27460 kg 48 kPa 0.49 kgf/cm2
Tungsten Carbide is injected into the end faces of the arm top Steering control . . . . . . . . . . . . . . . . . . . . . . . Two levers with pedals 27.6" 60,540 lb 6.97 psi
bushing to form a hard film, reducing wear of contacting Drive method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydrostatic 800 mm 27810 kg 42 kPa 0.43 kgf/cm2
surfaces and fluttering of the bucket. Maximum drawbar pull . . . . . . . . . . . . . 249 kN 25400 kgf 56,000 lb 31.5" 61,310 lb 6.15 psi
Inner Air Filter *(264 kN 26900 kgf 59,300 lb)
Outer Air Filter
Gradeability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70%, 35
Tungsten Carbide
Removal and installation of air conditioner filter element, Maximum travel speed: High 5.5 km/h 3.4 mph *(4.5 km/h 2.8 mph)
Injected
without tools, facilitates cleaning. (Auto-Shift) Mid 4.1 km/h 2.5 mph *(3.3 km/h 2.1 mph)
Low 3.0 km/h 1.9 mph *(2.8 km/h 1.8 mph)
Service brake Hydraulic lock
Fuel Tank Capacity Increased Parking brake . . . . . . . . . . . . . . . . . . . . . . . . .Mechanical disc brake
*with optional heavy duty travel motor
Fuel tank capacity is increased from 340 ltr 89.8 U.S. gal
to 400 ltr 105.7 U.S. gal to extend operating hours before
refueling. The fuel tank is treated for rust prevention and
improved corrosion resistance.

8 9
 DIMENSIONS LIFTING CAPACITY WITH LIFTING MODE ON MULTI-FUNCTION COLOR MONITOR

A A: Reach from swing center Conditions:

Arm Length 2500 mm 8'2" 3045 mm 10'0" 3500 mm 11'6"
B: Bucket hook height 5850 mm 19'2" one-piece boom
A Overall length 9940 mm 32'7" 9790 mm 32'1" 9890 mm 32'5"
C: Lifting capacity 1.26 m3 1.65 yd3 SAE heaped bucket
B Length on ground (transport) 5960 mm 19'7" 5180 mm 17'0" 4790 mm 15'9"
Cf: Rating over front Shoe width:
C Overall height (to top of boom) 3320 mm 10'11" 3210 mm 10'6" 3280 mm 10'9" Cs: Rating over side 600 mm 23.6" triple grouser
B : Rating at maximum reach
D Overall width 3190 mm 10'6"
E Overall height (to top of cab) 3100 mm 10'2" C
F Ground clearance, counterweight 1186 mm 3'11" A Arm: 3045 mm 10'0" Bucket: 1.26 m3 1.65 yd3 SAE heaped Shoe: 600 mm 23.6" triple grouser
G Ground clearance (minimum) 498 mm 1'8" P H,Q A 7.6 m 25' 6.1 m 20' 4.6 m 15' 3.0 m 10' 1.5 m 5'
MAX
H Tail swing radius 2940 mm 9'8" B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
I Track length on ground 3700 mm 12'2" 7.6 m *3250 kg *3250 kg
J Track length 4625 mm 15'2" 25' *7,200 lb *7,200 lb
E C
K Track gauge 2590 mm 8'6" 6.1 m *3100 kg *3100 kg *4250 kg *4250 kg *6250 kg *6250 kg
O
L Width of crawler 3190 mm 10'6" 20' *6,900 lb *6,900 lb *9,400 lb *9,400 lb *13,700 lb *13,700 lb
F
M Shoe width 600 mm 23.6" 4.6 m *3150 kg *3150 kg *6200 kg 4250 kg *7100 kg 6400 kg
G M I 15' *7,000 lb *7,000 lb *13,700 lb 9,400 lb *15,700 lb 14,100 lb
N Grouser height 36 mm 1.4" N
K J 3.0 m *3350 kg 3050 kg 6100 kg 4100 kg *8400 kg 6050 kg *10750 kg 9750 kg *16950 kg *16950 kg
O Machine cab height 2200 mm 7'3" 10' *7,400 lb 6,800 lb 13,500 lb 9,100 lb *18,500 lb 13,400 lb *23,700 lb 21,500 lb *37,300 lb *37,300 lb
D,L B
P Machine cab width 2710 mm 8'11" 1.5 m *3700 kg 2950 kg 5950 kg 3950 kg 8600 kg 5700 kg *13300 kg 8950 kg *8600 kg *8600 kg
Q Distance, swing center to rear end 2905 mm 9'6" 5' *8,200 lb 6,500 lb 13,100 lb 8,700 lb 18,900 lb 12,600 lb *29,300 lb 19,800 lb *19,000 lb *19,000 lb
Om *4300 kg 3000 kg 5800 kg 3800 kg 8300 kg 5450 kg 13400 kg 8500 kg *9800 kg *9800 kg
0' *9,500 lb 6,600 lb 12,700 lb 8,400 lb 18,300 lb 12,000 lb 29,500 lb 18,700 lb *21,600 lb *21,600 lb
1.5 m 5050 kg 3300 kg 5700 kg 3750 kg 8150 kg 5300 kg 13200 kg 8300 kg *13950 kg *13950 kg *8650 kg *8650 kg
5' 11,100 lb 7,300 lb 12,600 lb 8,200 lb 17,900 lb 11,700 lb 29,100 lb 18,300 lb *30,800 lb *30,800 lb *19,100 lb *19,100 lb
3.0 m 6000 kg 3950 kg 8150 kg 5300 kg 13200 kg 8350 kg *20100 kg 17150 kg *13400 kg *13400 kg
WORKING RANGE 10' 13,200 lb 8,700 lb 17,900 lb 11,700 lb 29,100 lb 18,400 lb *44,300 lb 37,800 lb *29,600 lb *29,600 lb
4.6 m 8350 kg 5500 kg *11950 kg 8600 kg *16950 kg *16950 kg
H Arm 2500 mm 8'2" 3045 mm 10'0" 3500 mm 11'6" 15' 18,400 lb 12,100 lb *26,400 lb 18,900 lb *37,400 lb *37,400 lb
11(m)
A Max. digging height 9620 mm 31'7" 10000 mm 32'10" 10130 mm 33'3"
10
B Max. dumping height 6720 mm 22'1" 7035 mm 23'1" 7200 mm 23'7" Arm: 2500 mm 8'2" Bucket: 1.26 m3 1.65 yd3 SAE heaped Shoe: 600 mm 23.6" triple grouser
9

8 C Max. digging depth 5940 mm 19'6" 6460 mm 21'2" 6940 mm 22'9" A MAX 7.6 m 25' 6.1 m 20' 4.6 m 15' 3.0 m 10' 1.5 m 5'
7 D Max. vertical wall B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
4800 mm 15'9" 5650 mm 18'6" 5930 mm 19'5"
6 digging depth 7.6 m *5250 kg *5250 kg *5350 kg *5350 kg
A 5
E Max. digging depth 25' *11,500 lb *11,500 lb *11,900 lb *11,900 lb
5750 mm 18'10" 6320 mm 20'9" 6790 mm 22'3"
B 4 of cut for 8' level 6.1 m *5050 kg 4650 kg *7000 kg 6500 kg
3
F Max. digging reach 9650 mm 31'8" 10100 mm 33'2" 10570 mm 34'8" 20' *11,100 lb 10,300 lb *15,400 lb 14,300 lb
2
G Max. digging reach 4.6 m *5100 kg 3850 kg 6200 kg 4200 kg *7800 kg 6300 kg *9200 kg *9200 kg
1 9450 mm 31'0" 9990 mm 32'9" 10390 mm 34'1"
0 G.L. at ground level 15' *11,300 lb 8,500 lb 13,700 lb 9,300 lb *17,200 lb 13,800 lb *20,300 lb *20,300 lb
-1 H Min. swing radius 3500 mm 11'6" 3430 mm 11'3" 3490 mm 11'5" 3.0 m 5200 kg 3450 kg 6050 kg 4050 kg 8850 kg 5950 kg *11800 kg 9500 kg
Bucket digging force 176 kN 176 kN 176 kN 10' 11,500 lb 7,600 lb 13,400 lb 9,000 lb 19,500 lb 13,100 lb *26,000 lb 20,900 lb
SAE rating

-2

C E D -3 at power max. 17900 kgf/39,460 lb 17900 kgf/39,460 lb 17900 kgf/39,460 lb 1.5 m 5050 kg 3350 kg 5900 kg 3900 kg 8500 kg 5650 kg 13700 kg 8800 kg
-4
Arm crowd force 165 kN 136 kN 123 kN 5' 11,100 lb 7,300 lb 13,000 lb 8,700 lb 18,700 lb 12,400 lb 30,300 lb 19,400 lb
-5 at power max. 16800 kgf/37,040 lb 13900 kgf/30,640 lb 12500 kgf/27,560 lb Om 5200 kg 3400 kg 5800 kg 3800 kg 8250 kg 5400 kg 13300 kg 8400 kg *9250 kg *9250 kg
-6
Bucket digging force 198 kN 198 kN 198 kN 0' 11,500 lb 7,500 lb 12,800 lb 8,400 lb 18,200 lb 11,900 lb 29,300 lb 18,600 lb *20,400 lb *20,400 lb
ISO rating

-7
at power max. 20200 kgf/44,530 lb 20200 kgf/44,530 lb 20200 kgf/44,530 lb 1.5 m 5750 kg 3800 kg 5750 kg 3800 kg 8150 kg 5350 kg 13200 kg 8350 kg *15650 kg *15650 kg
-8
11 10 9 8 7 6 5 4 3 2 1 0
Arm crowd force 170 kN 148 kN 126 kN 5' 12,700 lb 8,300 lb 12,700 lb 8,300 lb 18,000 lb 11,700 lb 29,100 lb 18,400 lb *34,500 lb *34,500 lb
(m)
2440 8' at power max. 17300 kgf/38,140 lb 15100 kgf/33,290 lb 12800 kgf/28,220 lb 3.0 m 7100 kg 4650 kg 8200 kg 5400 kg 13300 kg 8450 kg *19200 kg 17300 kg
G 10' 15,600 lb 10,300 lb 18,100 lb 11,900 lb 29,400 lb 18,600 lb *42,400 lb 38,200 lb
F 4.6 m *8950 kg 7150 kg *10350 kg 8500 kg
15' *19,800 lb 15,700 lb *22,800 lb 18,800 lb

Arm: 3500 mm 11'6" Bucket: 1.26 m3 1.65 yd3 SAE heaped Shoe: 600 mm 23.6" triple grouser
BACKHOE BUCKET, ARM, AND BOOM COMBINATION
A MAX 7.6 m 25' 6.1 m 20' 4.6 m 15' 3.0 m 10' 1.5 m 5'

Bucket Capacity B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
(heaped) Width Weight Number Arm Length 7.6 m *2450 kg *2450 kg
of Teeth 25' *5,500 lb *5,500 lb
SAE, PCSA CECE Without Side Cutters With Side Cutters With Side Cutters 2.5 m 8'2" 3.0 m 10'0" 3.5 m 11'6"
6.1 m *2400 kg *2400 kg *4000 kg *4000 kg
1.26 m3 1.65 yd3 1.10 m3 1.44 yd3 1400 mm 55.1" 1505 mm 59.3" 845 kg 1,860 lb 5    20' *5,300 lb *5,300 lb *8,800 lb *8,800 lb
4.6 m *2450 kg *2450 kg *5450 kg 4300 kg *6500 kg 6450 kg
: General purpose use, density up to 1.8 ton/m3 1.52 U.S. ton/yd3
15' *5,400 lb *5,400 lb *12,000 lb 9,500 lb *14,300 lb 14,200 lb
3.0 m *2650 kg *2650 kg 6150 kg 4100 kg *7800 kg 6100 kg *9800 kg *9800 kg *14400 kg *14400 kg
10' *5,800 lb *5,800 lb 13,500 lb 9,100 lb *17,200 lb 13,500 lb *21,600 lb *21,600 lb *31,800 lb *31,800 lb
1.5 m *2950 kg 2750 kg 5950 kg 3950 kg 8600 kg 5750 kg *12500 kg 9100 kg *13350 kg *13350 kg
5' *6,500 lb 6,100 lb 13,100 lb 8,700 lb 19,000 lb 12,600 lb *27,600 lb 20,000 lb *29,400 lb *29,400 lb
Om *3450 kg 2800 kg 5750 kg 3750 kg 8250 kg 5400 kg 13400 kg 8500 kg *11400 kg *11400 kg *5050 kg *5050 kg
0' *7,600 lb 6,200 lb 12,700 lb 8,300 lb 18,200 lb 11,900 lb 29,600 lb 18,800 lb *25,200 lb *25,200 lb *11,200 lb *11,200 lb
1.5 m *4300 kg 3000 kg 5650 kg 3650 kg 8050 kg 5250 kg 13100 kg 8250 kg *14100 kg *14100 kg *8600 kg *8600 kg
5' *9,500 lb 6,700 lb 12,400 lb 8,100 lb 17,800 lb 11,500 lb 28,900 lb 18,200 lb *31,100 lb *31,100 lb *19,000 lb *19,000 lb
3.0 m 5500 kg 3550 kg 5650 kg 3650 kg 8000 kg 5200 kg 13050 kg 8200 kg *18700 kg 16850 kg *12450 kg *12450 kg
10' 12,100 lb 7,900 lb 12,400 lb 8,100 lb 17,700 lb 11,500 lb 28,800 lb 18,100 lb *41,200 lb 37,200 lb *27,400 lb *27,400 lb
4.6 m 7350 kg 4800 kg 8150 kg 5300 kg *12750 kg 8400 kg *18400 kg 17300 kg
15' 16,200 lb 10,600 lb 18,000 lb 11,700 lb *28,200 lb 18,500 lb *40,600 lb 38,100 lb

* Load is limited by hydraulic capacity rather than tipping. Ratings are based on SAE Standard No. J/ISO 10567. Rated loads do not exceed 87% of hydraulic lift
capacity or 75% of tipping load.
10 11
 STANDARD EQUIPMENT

Air conditioner with defroster Counterweight Power supply, 12-V

Alternator, 60 Ampere, 24 V Dry type air cleaner, double element PPC hydraulic control system
Arm Electric horn Poor fuel arrangement
3045 mm 10'0" HD arm assembly Engine, Komatsu SAA6D102E-2 Radiator and oil cooler dustproof net
Auto-Decel Engine overheat prevention system Rearview mirror, RH, LH
Automatic deaeration system for fuel line Fan guard structure Seat belt, retractable
Automatic engine warm-up system FM/AM radio Seat, suspension
Batteries, large capacity Half deck guard Shoes, triple grouser: 600 mm 23.6"
Boom, 5850 mm 19'2" Hard water area arrangement Starting motor, 5.5 kW/24 V x 1
Boom and arm holding valve Hydraulic track adjusters (each side) Track frame undercover
Cab, capable FOG with optional bolt-on In-line filter Track guiding guard, center section
top guard Multi-function color monitor Travel alarm
Cab, front half height guard One service valve Working light, 2 (boom and RH)
Cab, vandalism protection Power maximizing system Working mode selection system

OPTIONAL EQUIPMENT

Air conditioner with large blower Boom, 5850 mm 19'2" with attachment Shoes, triple grouser
Arms piping 700 mm 27.6", 800 mm 31.5"
2500 mm 8'2" HD arm assembly Cab front guard Track roller guards (full length)
3500 mm 11'6" HD arm assembly Full height guard
Bolt-on top guard, [Operator Protective Deck guard
Guards level 2 (FOG)] Heavy duty travel motor

SPECIAL PURPOSE BUCKET

Bucket
Play adjustment mechanism

For a complete line up of available

attachments,please contact your local
Komatsu distributor

www.Komatsu.com Printed in Japan 200404 IP.As(05)

HESS359201 Materials and specifications are subject to change without notice.

is a trademark of Komatsu Ltd. Japan.