DSS User's Manual V6.01.000 201602

DSS Users Manual
Version 6.01.000
Table of Contents
1 OVERVIEW.............................................................................................................................1
2 CONFIGURE SYSTEM...........................................................................................................2
2.1 Initialization Setup.................................................................................................................. 2

2.1.1 Startup.................................................................................................................................. 2
2.1.2 System IP Address Config.................................................................................................... 2
2.1.3 How to get the IP of DSS...................................................................................................... 3
2.1.4 Other Basic Config............................................................................................................... 3
2.2 System Config on WEB......................................................................................................... 4

2.2.1 Login WEB............................................................................................................................ 5
2.2.2 Pure Software License Import.............................................................................................. 5
2.2.3 System Parameter Config.................................................................................................... 6
3 ADD ORGANIZATION AND LOGIN USER............................................................................9
3.1 Add Organization.................................................................................................................... 9
3.2 Add User Role....................................................................................................................... 10
3.3 Add User................................................................................................................................ 12
4 DSS CLIENT INSTALLATION AND LOGIN.........................................................................14
4.1 Requirement for PC.............................................................................................................. 14
4.2 Install..................................................................................................................................... 14
4.3 Login...................................................................................................................................... 15
4.4 Local Config.......................................................................................................................... 17
5 LIVE PREVIEW.....................................................................................................................21
5.1.1 Video Preview for General Encoding Device......................................................................21
5.2 Local Data.............................................................................................................................. 23
5.3 Fisheye.................................................................................................................................. 24
5.4 Tour Task............................................................................................................................... 26

5.4.1 Tour Task............................................................................................................................ 26
5.4.2 Tour Plan............................................................................................................................ 28
5.5 PTZ......................................................................................................................................... 31
i
5.6 POS Function........................................................................................................................ 34
6 PLAYBACK...........................................................................................................................38
6.1 Configure Storage Plan........................................................................................................ 38
6.2 Playback................................................................................................................................ 42
6.2.1 Playback............................................................................................................................. 42
6.2.2 Playback by Time Slice....................................................................................................... 43
6.2.3 Mark Record....................................................................................................................... 44
6.2.4 Record Lock....................................................................................................................... 46
6.2.5 Download Record............................................................................................................... 47
7 E-MAP...................................................................................................................................50
7.1 Raster Map............................................................................................................................ 50

7.1.1 Configure System and Select Map.....................................................................................50
7.1.2 DSS Manager Map Config.................................................................................................. 50
7.1.3 DSS Client Map Function................................................................................................... 52
7.2 Google, Google Offline Map Config....................................................................................53

7.2.1 Configure System and Select Map.....................................................................................53
7.2.2 DSS Manager Map Config.................................................................................................. 54
7.2.3 DSS Client Using Map Function......................................................................................... 55
7.2.3.1 Surveillance............................................................................................................... 55
7.2.3.2 Mobile Police.............................................................................................................. 60
8 ALARM..................................................................................................................................64
8.1 Device-end Config................................................................................................................ 64
8.2 Config DSS Manager Alarm Scheme...................................................................................65

8.2.1 Set Contacts....................................................................................................................... 66
8.2.2 Set Link Level..................................................................................................................... 66
8.2.3 Set Alarm Time Template.................................................................................................... 67
8.2.4 Set Alarm Storm................................................................................................................. 68
8.2.5 Set Alarm Video on Wall..................................................................................................... 69
8.2.6 Alarm Scheme Config......................................................................................................... 70
8.3 DSS Client Alarm Scheme Config.......................................................................................73

8.3.1 Alarm Scheme Config......................................................................................................... 73
8.4 Alarm Manager...................................................................................................................... 78
9 TV WALL...............................................................................................................................80
9.1 Add Decoder or Matrix Device.............................................................................................80
ii
9.2 Config TV Wall on DSS Manager.........................................................................................81
9.3 Config TV Wall Task on DSS Client.....................................................................................83
10 AUDIO INTERCOM...............................................................................................................87
10.1 Audio Talk.............................................................................................................................. 87
10.2 Broadcast.............................................................................................................................. 89
11 VIDEO INTERCOM...............................................................................................................91
11.1 Config Device........................................................................................................................ 91

11.1.1 VTO Setup...................................................................................................................... 91
11.1.2 VTH Setup...................................................................................................................... 92
11.2 Add Device on DSS Manager............................................................................................... 95
11.3 Video Intercom Function on DSS Client.............................................................................96

11.3.1 Video Talk....................................................................................................................... 96
11.3.2 Send Message............................................................................................................. 101
11.3.3 Event Search................................................................................................................ 101
12 PEOPLE STATISTICS........................................................................................................102
12.1 Add Smart IPC Device........................................................................................................ 102
12.2 People Statistical Report.................................................................................................... 102
13 ACCESS CONTROL...........................................................................................................104
13.1 DSS Manager Device.......................................................................................................... 104

13.1.1 Add A&C Device........................................................................................................... 104
13.1.2 Unlock Timeout Config................................................................................................. 104
13.1.3 Link Video..................................................................................................................... 105
13.2 Access Control................................................................................................................... 106
14 ALARM CONTROLLER.....................................................................................................109
14.1 Add Alarm Controller Device.............................................................................................109
14.2 Alarm Controller.................................................................................................................. 109
15 INTELLIGENT DEVICE (OPTIONAL)................................................................................112
15.1 Behavior............................................................................................................................... 112
iii
15.2 Face Recognition................................................................................................................ 112
15.3 Smart Track......................................................................................................................... 113
15.4 People Count....................................................................................................................... 115
15.5 Master/Slave Tracking........................................................................................................ 116
16 STATISTICS........................................................................................................................118
16.1 Statistics.............................................................................................................................. 118
16.2 Video Quality Analytics...................................................................................................... 120

16.2.1 Config Analytics Item.................................................................................................... 120
16.2.2 Configure Analytics Task..............................................................................................121
16.2.3 Config Analytics Scheme.............................................................................................. 121
16.2.4 View Video Diagnosis Result........................................................................................122
17 OTHER DSS MANAGER OPERATIONS...........................................................................125
17.1 Server Management............................................................................................................ 125
17.2 Cascade............................................................................................................................... 126
17.3 System Config..................................................................................................................... 127

17.3.1 Upload.......................................................................................................................... 127
17.3.2 Backup and Restore..................................................................................................... 128
17.3.2.1 System Backup........................................................................................................ 128
17.3.2.2 Restore.................................................................................................................... 128
17.3.3 Resource Re-Config..................................................................................................... 128
17.3.3.1 Video Server............................................................................................................ 129
17.3.3.2 Parameter Re-Config............................................................................................... 129
18 WEB CLIENT......................................................................................................................130
18.1 Login WEB........................................................................................................................... 130
18.2 Setup.................................................................................................................................... 131
18.3 Video Monitor...................................................................................................................... 131

18.3.1 Preview........................................................................................................................ 131
18.3.2 Playback....................................................................................................................... 131
18.3.3 TV Wall......................................................................................................................... 131
18.4 Map....................................................................................................................................... 131
iv
Welcome
Thank you for using our Digital Surveillance System (DSS)!
This users manual is designed to be a reference tool for operation of your system.
Here you can find detailed operation information about DSS.
v
Important Safeguards and Warnings
Please read the following safeguards and warnings carefully before using the product in order to
avoid damages and losses.
Note:
Do not expose the device to lampblack, steam or dust. Otherwise it may cause fire or
electric shock.
Do not install the device at position exposed to sunlight or in high temperature.
Temperature rise in device may cause fire.
Do not expose the device to humid environment. Otherwise it may cause fire.
The device must be installed on solid and flat surface in order to guarantee safety under
load and earthquake. Otherwise, it may cause device to fall off or turnover.
Do not place the device on carpet or quilt.
Do not block air vent of the device or ventilation around the device. Otherwise,
temperature in device will rise and may cause fire.
Do not place any object on the device.
Do not disassemble the device without professional instruction.
Warning:
Please use battery properly to avoid fire, explosion and other dangers.
Please replace used battery with battery of the same type.
Do not use power line other than the one specified. Please use it properly. Otherwise, it
may cause fire or electric shock.
Special Announcement
This manual is for reference only.
All the designs and software here are subject to change without prior written notice.
All trademarks and registered trademarks are the properties of their respective owners.
If there is any uncertainty or controversy, please refer to the final explanation of us.
Please visit our website for more information.
vi
1 Overview
DSS Platform is software for user to manage DSS and it has the following functions:
Multi-device, multi-channel real time monitoring and record playback
Local snapshot, record mark and etc. of playback record
E-map function allows user to position the device at any time.
Audio intercom allows client to communicate with front-end device and broadcast.
Video intercom, remote unlock and talk
Easy management and Control TV Wall display synchronously.
Customize monitoring plan and supports multi-channel/window video tour.
Alarm activation with alarm video
Mouse simulating rocker to control PTZ
Fisheye and speed dome link
Access control, alarm controller arm/disarm
Behavior analysis, people count, heat map.
DSS Client currently has four formats:

C/S Client.
B/S Client, please see Ch. 18.
Android Client
IOS Client
1
2 Configure System
2.1Initialization Setup
Before you use the platform, please follow the steps listed below to set the initialization
information.
Startup
Connect the power supply and startup.
The first time you startup, system will format the hard disk automatic, may take you about 10
minutes, please be patient.
Note: DSS Built-in one 1T corporate hard disk, if system start abnormal, need to check
whether the hard disk is loose.
System IP Address Config

Before you use the platform, please set system IP address.
DSS default IP address:
port 1:192.168.1.108
port 2:192.168.2.108
port 3:192.168.3.108
port 4:192.168.4.108
Please input http://ip/config on the IE and then click Enter button. System pops up the following
dialogue box. See Figure 2- .
Figure 2-
Step 1. Please input user name and password. System default user name is admin and
password is 123456.
Note: For security reason, please change your login password after you first
login. Password can contains number, letter, underline and other symbols.
Step 2. Select Maintenance> Network Card Config tab, modify the IP Address of different
network card, then Apply. See Figure 2-
2
Figure 2-
How to get the IP of DSS

If you forget IP address of DSS, you can get it back by Dahuas ConfigTool.
Step 1. Connect PC with DSS directly by a net cable. Open Configtool, then set as below.
See Figure 2- .
Figure 2-
Step 2. Click the button Refresh, then you can see the DSSS IP address. See Figure 2-
.
Figure 2-
Other Basic Config
3
After you set platform IP address, please access the platform via a PC to config system
basic infomation. Please refer to Ch 2.1.3
Step 1. System maintenance.
i. Select Maintenance>Manage Account tab, manage user account/password.
ii. Select Maintenance>Maintenance tab, switch master-slave mode, shutdown,
reboot and restore default.
iii. Select Maintenance> Network Card Config tab, configure network mode, net card,
IP address and etc.
iv. Select Maintenance>Time Setup tab, set time zone, date, time and NTP server.
v. Select Maintenance>Port tab, set server port for WEB.
Step 2. Storage config.

There are local disk and network disk two storage methods.
i. Select Storage Config>Local Disk interface, you can refresh, format disk and
perform other operations.
ii. Select Storage Config>Network Disk interface, you can add, format, refresh disk
and perform other operations.
Step 3. Link config.

Select Link Config>Mail Link interface. See Figure 2- . When you configure alarm scheme at
Master-end, select main link and set main receiver. If alarm occurs, an email will be sent to
that email address.
Figure 2-
i. Configure parameter, click Application. SMTP servers listening port is 25 by

default.
ii. Check Enable.
4
2.2System Config on WEB
Login WEB
You can refer to the following steps to login DSS manager. In Internet Explorer, input IP address
of DSS, press Enter. You will see Figure 2- .
Default username is system. Default password is 123456.
Figure 2-
Note: You can download DSS Client on this login page. If it is your first time login
DSS Manager, please add its IP address into the trusted site of your explorer.
License
It is just for pure software version currently, when you finished the install, the system only
provides a trial version with 30-day basic video function, if system need support much more,
include channel number, add-ons, and more long, can contact the business man to apply.
Step 1. Login DSS Manager.

Step 2. Click License at the upper-right corner.
The system provides a trial version support basic video function with 30-day and 100
channels default.
Step 3. you can apply for a 30-day value-added function trial, currently, the system
support POS, People Count, Video Talk, Trial only free 100 channel and 30-day
Step 4. you also can purchase the service. Click Buy bar, see Figure 2- .
5
Figure 2-
Step 5. Enter number of channels you want to purchase, click Export.

Step 6. Send exported License file to supplier, and after you have gotten activation file,
click Import to import it into the system.
System Parameter Config

When you first login the system, you shall configure system settings in order to make the system
run properly.
Configure the system as follows:
Step 1. Select System > Parameters, you will see Figure 2- .
Figure 2-
6
Parameter Note
CMS IP Address IP address of manager server
LAN Port LAN port of manager server, default is 9000
WAN Port WAN port of manager server.
PCS LAN IP IP address of PCS
LAN Port LAN port of PCS, default is 9001
7
Parameter Note
WAN Port WAN port of PCS.
WEB LAN IP LAN IP of WEB server.

Server
WAN IP WAN IP of WEB server.
LAN Port LAN port of WEB server, default is 80.
WAN Port WAN port of WEB server.
Log Max Save Time Set max save time of log, default is 30 days
Alarm Max Save Time Set max save time of alarm info, default is 30 days
Info
Sync Server Sync If check this parameter, then enable server sync function.
Setup
Device Sync If check this parameter, then enable device sync function.
Start Time Set start time of time sync.
Sync Interval Subject to server time sync device and server time.
Default is 2 hours as every 2 hours; system is subject to server
time and sync time with server.
Note:
Device and server sync time via SDK.
Sync Now Click it to start time sync immediately.
Alarm LAN Path FTP LAN address where to save alarm picture.
Picture
FTP
Server WAN Path FTP WAN address where to save alarm picture.
Username/Password Username and password to login FTP server
8
Parameter Note
Org/Channel SN If check Start, organization and channel will have this SN.
If you do not check Start, this SN will not be display in
organization manager and device manager.
Multicast If check Start, you can see multicast when add device.
If you do not check Start, you cannot see multicast when
add device.
Step 2. Configure parameters.

Step 3. Click Submit.
9
3 Add Organization and Login User
You can enter IP address of DSS platform in IE to login Manager.
3.1Add Organization
Before you add device, you need to add organization of current device. You can arrange,
organize and manage layer of device in Org.
The default first-level organization is root node. Newly added organization will be displayed
below the root node.
Select General>
Select General> Org, Org includes basic organization and logic organization. When you
configure user role, if you select different organizations in the right area of Device
Right>Device Tree Display Right, then in Client Live Preview interface, it shows device
under the corresponding organization.
Select General> Org.
1. Click .
System pops up Add Org box, see Figure 3- .
Figure 3-
2. Select Upper Org, input Org Name, SN.
3. Click .
Note:You can only modify root node organization info, and you cannot delete this
organization.
Select Org>Logic Org, click Create Logic Org.
System shows Create Logic Org box, see Figure 3- .
10
Figure 3-
1. Enter org name, click OK.

2. After you add new logic org in the area on the left, click and select config.
You also can click create login org in area on the left, then root node will be shown
belw.
3. In channel Config Channels area , select alternative channel and add it to selected
channel. See Figure 3- .
Figure 3-
You can adjust channel selection via , , and .
3.2Add User Role

DSS Platform supports to add user role and then add user. Existing user can login Manager as
well as Client. Different user roles lead to different operation rights.
Rights of user role includes Administrator Menu right, Operator Menu right and Device right. You
must grand these rights before you can operate.
Step 1. Click General>Account. System displays Account interface.
Step 2. Click Role tab.
Step 3. Click . System pops up Add Role box.
Step 4. Input Role Name, and select Role Level.
11
Note: If you check Copy Role next to Role Name, and select one role from the dropdown box,
then the info will be pasted to your selected role.
Step 5. Click Device Rights page, select right in Right Trees and select channel in Channel Tree
on the right. See Figure 3- .
Figure 3-
Note:
Click so you can copy setting from the selected node to current node.
If you do not check corresponding device right, then all users under this role will have no
corresponding rights.
Step 6. Click System Rights tag, select corresponding system rights. See Figure 3- .
12
Figure 3-
Step 7. Click OK to add the role.
3.3 Add User

If you have added user role, now you can add user of that role.
Step 1. Click User tab under Account.
Step 2. Click . System pops up Add User box.
Step 3. Create a username, a password and confirm password. Select Department and Role.
See Figure 3- .
13
Figure 3-
Note:
If you check Reusable box next to Username, then you allows more than one user to login
system with this Username at the same time.
If you do not select a role, then the user will have no System Rights or Device Rights.
You can select more than one role at a time.
You can click Optional in the lower-left corner to fill in extra info.
Step 4. Click OK to add user.
14
4 DSS Client Installation and Login
4.1Requirement for PC
To install DSS, your PC shall match the following requirements. See Chart 4- .
Parameter Requirement
OS Microsoft Windows XP SP3, Microsoft Windows 7

CPU Core 2 dual-core 3.0
Hard Disk At least 10GB free space
Video Card DirectX 9.0c and higher
Memory At least 2GB
Monitor 1024768 and higher
Explorer IE7, IE8
Chart 4-
4.2Install
Please follow these steps to install DSS Client:
Step 1. Download and install the Client
a) In Internet Explorer, input the IP address of DSS. System displays login interface of
DSS Manager as in Figure 4- .
15
Figure 4-
b) Click Download Client-end. System pops up a box.
c) Click Save. Download and save DSS Client to local PC.

Step 2. Install the Client, check Run DSSClient, see Figure 4- .
Figure 4-
4.3Login
16
DSS Client interface is shown in Figure 4- .
Figure 4-
Step 1. Input Username and Password.

Step 2. Click Server, and input Server IP and Port. Server IP shall be the IP address of DSS.
Default port is 9000.
Step 3. Click Login. System pops up homepage as in Figure 4- .
17
Figure 4-
Click Log Off on the right of interface to switch user.

Click Password to modify login password.
Click in the upper-right corner to lock account. To unlock, you need to input login
password in box pops up.
4.4Local Config
After you first login Client, you can Window Split, Connection Type, Bit Stream Type, Alarm Level
Amount, Video Buffer Time, Snapshot Save Path, Max Record Path and Record Save Path and
etc.
Step 1. Click in Setup Manager area. System enters Local Setup interface. See Figure 4-
Figure 4-
18
Parameter Note
General Default Set preview, playback and others default display modes.
Window
Split
Alarm Level Max alarms in Alarm Manager. Default is 1000 items.

Amount
Time Format Set 12 Hour or 24 Hour standard.
Enable Check to enable keyboard.

Keyboard
Serial Port Select port (COM 1~COM10)
For network keyboard use only.
Display
Alarm Display it or not
Overlay
: real time display CPU status
Pane
: Real time display net status
: Quickly enter Alarm Manager>Alarm List interface.
: Quickly enter Alarm Manager>System Event interface.
: Prompt alarm device

Respond sync time or not:
Sync Time
Check: sync server time by Client.
Not check: Do not sync server time.

Display PTZ Check it to display 8 keys of PTZ in window.
Button
General Empty If you create more than one organization on Manager, and the
Organization organizations have no device. Select this parameter, so Client
displays name of the organizations.
19
Parameter Note
Auto Login If select this parameter, then you will automatically login the client
when you open it.
Stay at the If you select this parameter, then image stops at the last frame
Last Frame during tour.
of the Tour
Self- During talk, system can auto match device sampling frequency,
adaptive sampling bit, and audio format.
Audio Talk
Parameter
Auto Reboot If you select this parameter, when PC boots up, the client boots up
automatically.
Video Connection Request video mode.

Type
Bit Stream Bit stream type used when you open video, you can select default
Type bit stream, or self-adaptive stream for window size.
Play Mode Select play mode accordingly.
There are RT priority, fluency priority and balance first. Default video
buffer time is 1500ms.
Login Task enabled after login. IncludeNone, previous tour task,

Enable previous preview record.
Double Click Double click window to switch to main stream.

on Real
Note:
Time
When window split is more than 9, double click a window to
Window to
maximize window. Video stream will be switched to main stream.
Switch to
Main
Stream
Display When system has error or user encounters operation error, it shows
Error Info a message box or not.
20
Parameter Note
POS Width Live preview interface POS display width.
Display Display real time video bit rate and etc. in monitoring window or not.
Video Info
Playback Instant Select this parameter to enable instant playback.

Playback
Enable
RT Playback Select real time playback time, default is 15s.

Time
Select this Start playback

paramet
er,
playback
enable.
Enable High Check to prevent stuck high definition video.

Definition
Adjustment
Snapshot Save Select this parameter, then you will not see a snapshot box pops up.
Snapshot
Picture
Directly
Format of Picture storage format, as BMP and JEPG.

Save
Capture
Continuous Set amount of continuous snapshot. Min is 2, and max is 10.

Amount
Continuous Set continuous snapshot interval.

Interval
21
Parameter Note
Snapshot When you snapshot at local, storage path is set here.

Save Path
Picture ftp Enter FTP server address, username and password used to save
server picture
Record Max Record Max record time of local recording.

Time
Max Size of When you record locally, you cannot record file over this max size
Single
Record
Record Record storage path of local recording.

Save Path
Version View version info of the software.
Step 2. Set General, Snapshot and Record/Download info.

Step 3. Click Save.
22
5 Live Preview
Live Preview function supports to view live video, and monitor PTZ, snapshot, record and etc. at
the same time.
5.1Video Preview for General Encoding Device

Before you can use functions of Client, you shall add organization and device on Manager.
Directly enter DSS Platform IP address in IE, to login Manager,
Step 1. Select General>Device>Device, system displays device interface.
Step 2. Click
Step 3. Click . System displays Add Encoder box, see Figure 5- .
Figure 5-
Parameter Note
Add Type You can add device via the following methods:
23
Parameter Note
IP Address: If the device has static IP address, you can add

device with its IP address.
IP Section: If there are multiple devices with continuous IP
address, such as 192.168.1.50 192.168.1.100, and their
port no., channel number and other parameters are the
same, you can add these devices as batch by entering
starting IP and end IP.
Domain Name: If you do not know IP the device, you can its
domain name.
Auto Register: When front-end device has dynamic IP
address or in LAN, you shall add device via auto register.
For example, add mobile device via auto register.
ONVIF: When device supports ONVIF protocol, you can add
device via ONVIF.
Video Server Server where the device belongs to.

Click the box and you can select corresponding organization in
prompt box.
Device Type System supports to add device types including: DVR, IPC, NVS,
MDVR, NVR, Smart NVR, MPT3000, EVS, Smart IPC, VIT.
Zero Channel Code Combine multiple windows into one channel transmission.
Device Gateway If select this parameter, then enable device input gateway.
When you select transcoding, you need transcoding server.
If not select this parameter, then not enable this function.
Enable All If select this parameter, then enable all channels of the
alarm output device.
If not select this parameter, then not enable channel of the
alarm output device and cannot preview at Client.
By default, enable all is checked and is recommended.
Step 4. Set Input Info, and click Getting Info. System will automatically get info of video channel,
alarm input channel and alarm output channel.
Note: If you add device with IP section, domain name or auto register, then you cannot get info of
video channel, alarm input channel and alarm output channel by clicking on Getting Info.
Step 5. Click OK as finishing adding encoder.
Step 6. Login DSS Client.
Step 7. Click in Basic area. System shows Live Preview interface.
24
Step 8. In device list on the right, select channel and double click or drag it to video window. If
you double click device, then all channels under this device will be open.
Video window shows live preview, see Figure 5- .
Figure 5-
You can click in video window to locally record; click to snapshot. Record and snapshot
can be set in Local Config under Setup Manager area.
5.2Local Data
Snapshot picture and record will be saved in local disk.
You can search saved local data, as saved record and snapshot in Local Data interface.
Step 1. Click on in Setup Manager area. System pops up Local Data interface.
Step 2. On the right, select device channel.

Step 3. Config start time and end time. Select data type (picture, video) or use advanced search.
Step 4. Click on Search. See Figure 5- .
25
Figure 5-
Step 1. Right click searched picture or record, you can copy, cut and delete the picture or record.
You also can open path where the picture and record stored.
Step 2. Double click picture, you can view detailed info of picture.
Step 3. Double click record, you can view detailed info of record and playback the record.
Step 4. Click Local Record in the lower left corner, you can open local record storage path.
Step 5. Click to adjust picture size.
5.3Fisheye
DSS Platform supports fisheye device installation, which includes ceiling, wall mount and
grounding.
Step 2. Select General>Device>Device.
Step 3. Click Add. System pops up Add Encoder box, see Figure 5- .
26
Figure 5-
Step 4. Configure fisheye device parameter, for function, select support fisheye.
Step 5. Click OK. Login DSS Client.
Step 6. Click .
Step 7. Double click fisheye device on the right. Ceiling installation has 8 types, see Figure 5- as
there are 1+8 types.
27
Figure 5-
The fisheye in the center splits into 8 scenes. You can drag mouse to one of these blocks, such
as: , and its corresponding box will rotate.
Wall mount includes 5 types while grounding includes 7 types.
5.4Tour Task
Tour Task
You can set tour task to achieve tour over several windows. To set tour task:
Step 1. Click in Setup Manager area. System displays Tour Task interface.
Step 2. Click . System displays add task interface.
Step 3. Input Task Name, Description and select Window No.

Step 4. Drag designated device on the right to left window for setup as in Figure 5- .
28
Figure 5-
Click , so you can viewo video in Preview in the lower right to view it.
Click , to adjust sequence, or click to delete added channel on the left.
Step 5. Click Save.

See Figure 5- .
29
Figure 5-
To enable tour task, there are two ways:
In Tour Task interface, click to turn on tour task. You can now view monitoring
status of tour channel in Preview interface.

In Preview interface, select tour task in the lower left, and click start.
Tour Plan
By configuring tour plan, you can achieve start time and end time of each tour plan.
Step 1. Click in Setup Status area, select Tour Plan tab.
Step 2. Click .
Select wither Schedule or Tour Plan.

Note:
: schedule, may specify time to execute plan.
30
: tour plan, may specify tour plan with interval period.
Select schedule
See Figure 5- .
Figure 5-
1. Input plan name, select start time and end time.
2. Click to add tour plan.
3. Check Enable Remaining Time Plan, click Save.

Note:
Enable Temaining Time Plan: It means the plan to be executed at remaining time period
other than absolute time period.
Select tour plan

1. Configure corresponding parameter.
See Figure 5- .
31
Figure 5-
2. Click Save.
See Figure 5- .
32
Figure 5-
Click to import existing plan. Click to export plan.
5.5PTZ
If device type is speed dome, then you can click PTZ tab in the interface to set PTZ as in Figure
5- .
Figure 5-
Parameter Note
Click to lock current PTZ. Lock status is .

Based on current user level, control over PTZ may vary.
When low-level user lock the PTZ, high-level user can click
to unlock.
When high-level user lock the PTZ, low-level user cannot
unlock it until it is automatically unlocked.
User of same level can unlock PTZ that lock by each other.
Note:
PTZ default unlock time is 30s.
Control speed dome with mouse.
33
Parameter Note
Direction key It sets rotation direction of PTZ in eight directions as up, down, left,
right, upper left, upper-right, lower-left, lower-right.
Partial zoom for zoom in/out of certain area.
Note:
This function can only be controller with mouse.
Step Length It controls rotation speed of PTZ in 1~ 8 directions with different
step lengths.
Zoom It controls zoom of speed dome.
Focus It adjusts focus.
Iris It adjusts brightness.
Preset Via setting preset, you can rotate camera toward position of the
preset.
Tour Via setting tour, you can tour camera among different presets.
Note:
This function does not require support from speed dome, but
speed dome must support preset.
Aux It adjusts light, wiper, PTZ menu, auto rotation, aux 1, aux 2 and IR
light.
Preset
By setting preset, you can rotate camera toward position of preset. To add preset:
Step 1. Click direction key on PTZ to rotate camera.
Step 2. Click Preset tab.
Step 3. Click Add. System pops up Preset Setup interface.
Step 4. Input SN and Name as in Figure 5- .
Figure 5-
Step 5. Click OK.

When you need to rotate the camera toward designated position, you just need to select
direction from the dropdown list, and click Go.
34
Tour
Via set Tour, you can make camera tour among different presets.
Note: There must be at least two presets for tour.
To add tour:
Step 1. In PTZ interface, click Tour tab.
Step 2. Click Add. System pops up a new tour box.
Step 3. Input name and SN. In All Presets area on the left, select preset, and click Add. System
adds presets on the left to list on the right as in Figure 5- .
Figure 5-
Select preset on the left, click this button, presets will be added into list on the
right.
Select preset on the right, click this button, presets will be deleted from the list on
the right.
Modify Stay Time, click Stay Time column of presets on the right to modify it. It ranges from
3s ~ 6000s.
Step 4. Click OK. System will say it is successfully saved.
Step 5. Click OK.
When you want to start tour, in Tour tab, select tour from dropdown list and click Start.
Scan
Step 1. Select Scan from the dropdown list.
35
Step 2. Click PTZ button, rotate PTZ to a specific position toward left, click , set left border.
Step 3. Continue rotating PTZ to a specific position toward right, click , set right border.
Step 4. Click , to start scan, and PTZ will rotete back and forth within two borders.
Pattern
Pattern is the path of scanning.
Step 1. In the dropdown list, click Pattern.
Step 2. In dropdown list, select pattern number, you can set 5
patterns.
Step 3. Click Setup>Start Record, operate 8 PTZ buttons, to start setup of pattern.
Step 4. Click Setup>Stop Record, setup is complete.
Step 5. Click Startup to start rotation according to setup.
5.6POS Function
Before you can see POS transaction info on Client, you must add POS resource on DSS
Manager.
Warning
Current POS info are all connected to NVR, and sent to DSS Platform for storage via NVR
later, so you just need to add NVR of POS.

Step 2. Select General>Device>Device.
System shows Device interface.
Step 3. Click .
Step 4. Click . System shows Add Encoder box, see Figure 5- .
36
Figure 5-
For device type, select NVR, then you will see POS tab.
Step 5. Configure POS device parameter, click OK.
37
Figure 5-
Step 7. In Live Preview, click tab on the right.
Step 8. Double click POS device.

If you swipe card on POS device, then it will refresh POS card record in window on the left.
In POS interface, you can search POS info list and playback related record.
Step 1. Click in More Extension area.
Step 2. Select search time and etc, click Search.

POS info list are shown on the left, and related video is shown on the right, see Figure 5- .
38
Figure 5-
39
6 Playback
The system can search and playback record from device or center storage media. You can
search for different channels, different times, and different types of record on Client, playback
and download them. If there is record found, it will show different colors in date selection area.
Device storage: Record stored in SD card on front device or in DVR, NVR. Storage plan is
configured on device.
Center storage: Record stored on NVS, or DSS hard disk. For detailed config, please refer
to Storage config in System Config. Before you playback record from center, please
configure normal plan first. Within the setup period, the system will store record file on NVS.
6.1Configure Storage Plan

Step 2. Select Business>Storage. System displays Storage interface as in Figure 6- .
Figure 6-
Step 3. Set record time.

a) Click Time Template in the upper-right corner of storage interface. System displays Time
Template interface.
b) Click . System pops a Add Time Template box. See Figure 6- .
40
Figure 6-
c) Input Template Name, select cycle period. Set single system, cycle mode and never
stop. See Figure 6- .
Figure 6-
Note:
41
If you check Copy next to Template Name, and select template in the dropdown list, then you can
copy configured template to current template.
d) Click OK.
See Figure 6- .
Figure 6-
Step 4. Set normal plan.
a) Click in the upper right corner of Storage interface. System
displays Normal Plan interface.
42
b) Click . System pops up Add Normal plan box. See Figure 6- .
Figure 6-
c) Input Plan Name, and select Template, Bit Stream. Check Normal plan. See Figure 6- .
43
Figure 6-
d) Click OK. System displays configured normal plan.
6.2Playback
Playback
Step 1. Open DSS Client. In Basic area, click . System displays playback interface.
Step 2. In the upper-right corner, select Device, Center, or Period, and check device channel.
Step 3. Select date, time, record type for search.
Step 4. Click Search. After search is finished, channels with record will be displayed in time
progress. See Figure 6- .
44
Figure 6-
Step 5. Select channel to playback, click to play record. Or, double click time progress bar
to playback record of the moment you click.
Playback by Time Slice
Warning
Time Slice function is for record store in center only, make sure record has been ready.
System Support Center recording will query the video window period by the average number of
chips, and displays the corresponding period of the video in each window.
Step 1. In the Playback screen at the top right, select time slice.
Step 2. Select one channel, period for search, click Search.
The system will playback video corresponding period in each window. See Figure 6- .
45
Figure 6-
Mark Record
Via marking record, you can create bookmark in designated record.
To mark record:
Step 1. Click in Playback interface. System pops up a Add Mark box as in Figure 6- .
Figure 6-
Step 2. Input Name and Content, click OK. System pops up box saying mark successfully. Select
Continuous Mark to continuously mark current record.
46
Step 3. Click in playback window. System pops up a Mark Manager box as in Figure 6- .
Figure 6-
Select record, click , and , you may playback, delete and edit the record. For marked
record, it displays in progress bar in playback window,as in Figure 6- . Click , you can play
marked record file.
Figure 6-
DSS Client supports search, playback, edit and delete marked record.
If you have marked record, you can quickly search record with the mark, and you also can
playback, edit and delete the record. Please refer to Ch 5.2.3.
To search marked record:
Step 1. In Extension area, click . System displays Recrd Mark interface.
Step 2. In device list, select channel, time, and input mark name.
Step 3. Click Search Mark. System shows search result, see Figure 6- .
47
Figure 6-
Step 4. Check multiple marked records, and click to delete checked records.
Click to play record.

Click to delete record.
Click to edit.
Record Lock
Note:
You can only lock record which is recorded half an hour ago.
Step 1. In time bar in Record Playback window, right click time you want to lock record start at.
See Figure 6- .
Figure 6-
Step 2. Fill in record parameter, click Lock.

Step 3. If you search again, you will see blue color in progress bar which is the locked record.
See Figure 6- .
48
Figure 6-
Note:
When disk is full, ss will not overwrite locked record. SS is responsible for record storage,
playback, download.
All of locked records can be search in Record Lock interface.
Step 1. Click in Extension area. System shows Record Lock interface.
Step 2. In device list, select Channel, Start Time, End Time and Enter Lock Reason. Click Search
to search lock record. See Figure 6- .
Figure 6-
Step 3. Select channel, click to unlock multiple records at once.
Click to play record.

Click to unlock record.
Download Record
49
The system supports the playback of video downloaded and saved to a local PC.
Step 1. Click above playback window or click . See Figure 6- .
Figure 6-
Step 2. Check the file to be downloaded, select Download grounds , enter Comments , and click
Download.
The system starts downloading the file, Download Status to downloading. You can also click
download time tab, select the time period, by time period download video.
Step 3. Click in Record Playback interface. See Figure 6- .
50
Figure 6-
You can view the download progress; you can check the video files being downloaded
pause download and delete the file being downloaded.
51
7 E-Map
Before you can use E-map function, you must configure type of map on DSS, including raster
map, Google, Google offline map, while you must drag video device, ANPR device, alarm device
onto map so that you can use E-map function on Client. E-Map supports alarm prompt, video
preview and playback.
7.1Raster Map
Configure System and Select Map
Step 1. In IE enter IP address of DSS Platform followed by /config, such as
172.7.50.50/config. Press Enter.
Step 2. Enter username and password to login. \
Note:
Default username is admin. Default password is 123456.
Step 3. Select Map Config tab. See Figure 7- .
Figure 7-
Step 4. Select map type to set. Click Apply.
DSS Manager Map Config

DSS Manager supports to add video device, ANPR device, access control device, video intercom
device and etc.
Step 2. Select Business>E-map.
Step 3. Click Add.
Step 4. Select picture you want to add, click Submit.
See Figure 7- .
52
Figure 7-
Note:
Hot zone: To add a hot zone on map, click Add Hot Zone, then system will auto link to hot zone
map.
Step 5. Drag device under Video Input tab on the right onto map. See Figure 7- .
Figure 7-
Font color in Video Input device list:

Red: this channel has not configured on map.
Grey: this channel has been added on map.
53
Step 6. Drag device under Door Input, Alarm Input and etc. onto the map. Config of map is
complete.
DSS Client Map Function

Step 2. Click in Basic Function area. See Figure 7- .
Figure 7-
Step 3. Client device under Search tab, or directly click device on map.
Device info are shown on map, such as channel name, device no. and channel no.
Step 4. Double click device on map, or right click device, select Open Video to open live preview,
see Figure 7- .
54
Figure 7-
Step 5. Right click device, select record playback, configure playback time and storage type. You
can search playback record.
See Figure 7- .
Figure 7-
7.2Google, Google Offline Map Config

Configure System and Select Map
55
Google and Google offline map have similar configuration steps, so here we make Google offline
map as an example.
Step 1. Login DSS config system.
Step 2. Select Map config tab. See Figure 7- .
Figure 7-
Step 3. Select map type you want to set, configure map parameter, click Apply.
DSS Manager Map Config

Step 2. Select Business>E-map.
Step 3. Drag device channels under video device, ANPR device, alarm input tabs onto map, see
Figure 7- .
56
Figure 7-
Parameter Note
Move Device Click to move device on map.
Pane Select device via pane.
Clear Clear pane selection on screen.
Tool Include distance, side measuring, mark and reset.
Measure distancemeasure the actual distance
between two points.
Measure side measure the actual area of a
certain zone on map.
Markmark on map.
Resetreset map to initial position.
Full-Screen Show e-map in full screen. Under full screen mode,
click exit full screen at the upper-right corner to exit.
DSS Client Using Map Function

7.2.3.1 Surveillance
Step 2. Click in Basic Function area. As shown in Figure 7- , device dragged onto map
on Manager are shown.
57
Figure 7-
Step 3. Click on the right. The interface shows surveillance spots in a list with their
detailed locations, see Figure 7- .
58
Figure 7-
Step 4. Click spot, for example: A.

Detailed location is shown on map, such as device no., channel name and etc. See Figure
7- .
59
Figure 7-
Parameter Note
Device Open live preview of this channel.
Operation When live preview is in progress, the system supports local record, audio
intercom, snapshot and ON/OFF audio.
Playback this channels record.
Decode and output this channel to wall.
Area Search Search for video channel and ANPR e-police within surrounding of this
channel.
1. Click in Operation area, to view live preview.
See Figure 7- .
60
Figure 7-
2. Click in device operation area, to playback record on device or platform. See
Figure 7- .
Figure 7-
3. Click within operation box, to output video to wall.

See Figure 7- . Please refer to Ch 9.
61
Figure 7-
7.2.3.2 Mobile Police

If a vehicle has installed MDVR or GPS, or a policeman carries MPT300 device, then you can
view live moving pattern of vehicle or the policeman, and search pattern history of vehicle or
police man.
Note:
Before you can view pattern, you must go to DSS Manager General>Device, Encoder tab, add
MDVR and MPT300 device via active registration method, and then drag the device onto e-map.
Step 1. Client on the right in E-map interface. System shows Mobile Police interface, you
can see existing mobile device and GPS device, see Figure 7- .
Figure 7-
Step 2. Click next to device. See Figure 7- .
62
Figure 7-
Step 3. Configure Start Time, End Time and Interval.

Start time and end time cannot have interval over 2 days.
If you intend to search pattern of other police car, then you can click policeman police
car field, and select from the dropdown list.
Step 4. Click pattern history. The system shows result as in Figure 7- .
63
Figure 7-
Step 5. Click result, the system will show details in e-map, see Figure 7- .
64
Figure 7-
Click at the upper-right cornet to go back to E-Map homepage.
65
8 Alarm
DSS Platform supports alarm function, and you need to set alarm source on device first. Different
devices need different alarm type. Here makes NVR an example and introduces web config
steps.
8.1Device-end Config
Step 1. Directly login device web end, or go to DSS Manager-end Device interface>NVR device
tab, click .
Step 2. Open EVENT tab.

Step 3. Click VIDEO DETECTION.
Video detection includes Motion Detect, Video Loss, Tampering, Video Analytics. For
example, make Motion Detect as an example. See
Figure 8-
Parameter Note
Enable
Period Set monitoring period.
Anti-dither Set anti-dither time.
Region Set monitoring zone.
Record
Channel
Delay Set alarm delay time.
Alarm Out Select alarm output.
Latch
PTZ Activation PTZ activation.
Tour Select alarm video output.
Snapshot Set snapshot channel.
66
Parameter Note
Show Send Emailsend email when alarm occurs.
Message Alarm Uploadreport alarm to DSS platform. Here please check,
otherwise the platform cannot record alarm.
Buzzerbuzzer prompt alarm.
Messagesend message when alarm occurs.
Logalarm log generated when alarm occurs.
Step 4. Configure parameter info, click OK.

Step 5. According to actual need, you can click FACE DETECTION, AUDIO DETECT, ALARM
and other tabs to configure alarm parameter.
Then configure Local Alarm under Alarm tab.
Step 6. Select ALARM>Local Alarm. See Figure 8- .
Figure 8-
Parameter Note
Period Set monitoring period.
Delay Set alarm delay time.
Alarm Out Select alarm output.
PTZ Activation PTZ activation.
Tour Select alarm video output.
Snapshot Set snapshot channel.
Show Send Emailsend email when alarm occurs.
Message Alarm Uploadreport alarm to DSS platform. Here please check,
otherwise the platform cannot record alarm.
Buzzerbuzzer prompt alarm.
Messagesend message when alarm occurs.
Logalarm log generated when alarm occurs.
Step 7. Configure parameters, click OK.
8.2Config DSS Manager Alarm Scheme
67
Manager configured alarm scheme is for the entire platform, not a specific user. Thus all user
logged in the platform can receive alarm.
Contact: user you want to send alarm to.
Link level: link level of alarm.
Alarm time template: time template of alarm.
Alarm storm: batch config time interval of alarm. For the same device and same type of
alarm, when alarm is frequent, set alarm interval may make alarm report at a fixed interval.
Alarm video on wall: configure output to wall.
Alarm scheme: used to configure alarm scheme template.
Set Contacts
When you add user into contacts and if the setup of Link Level includes email or sms, then
system will send email or sms to the new contact.
Step 2. Click Business>Alarm tab. System displays Alarm interface.
Step 5. Click .
Step 6. Click . System pops up a Add Contacts box. See Figure 8- .
Figure 8-
Step 7. Input User Name, ID No., Email and Telephone.

Step 8. Click OK.
Set Link Level

You can set Link Level and its corresponding Link Mode as 1 is the highest and 5 is the lowest.
Step 1. Click . System pops up an interface as in Figure 8- .
68
Figure 8-
Step 9. Click . See Figure 8- .
Figure 8-
Step 10. Set Link Level Name and select Link Mode.
Step 11. Click OK.
Set Alarm Time Template

You can follow these steps:
Step 1. Click . System displays time template interface.
Step 12. Click Add. System pops up an Add Alarm Time Template box.
Step 13. Input Template Name, select cycle period. Set Single Period and link level. See
Figure 8- .
69
Figure 8-
Note:
If you check the Copy box next to Template Name, then you need to select template in the
dropdown box.
You shall set Link Level first before select level here. Please refer to Ch 7.2.2.
Click to set Link Level of other periods.
Step 4. Click OK.
Set Alarm Storm

You can set alarm interval and customized alarm storm as batch.
Set alarm interval as batch
Step 1. Click . System displays Alarm Storm interface.
Step 2. Select one or more alarm storm, and click . System pops up a
box as in Figure 8- .
70
Figure 8-
Step 3. Set Alarm Interval.

Note: The interval cannot be over 86400 seconds.
Step 4. Click OK.
You can click to stop alarm interval as batch.
Set Alarm Video on Wall

Note:
You shall configure TV wall before outputting alarm video to the TV wall. Please refer to font color
in 0 video input device list.
Red: the channel has not configured on map.
Grey: the channel is added on map.
Step 1. Drag ANPR input, A&C input and alarm input on the right onto map.
Step 2. Complete e-map config.
Configure Alarm Scheme as follows:
Step 1. Click .
Step 2. Click . System pops up an Add Alarm Scheme box.
Step 3. Input Scheme Name, select template and check Enable.

Step 4. Drag channel on the left to TV wall window. See Figure 8- .
71
Figure 8-
Step 5. Click Save.
Alarm Scheme Config

Configure Alarm Scheme as follows:
Step 1. Click .
Step 2. Click . System pops up an Add Alarm Scheme box as in Figure 8- .
72
Figure 8-
Step 3. Input Scheme Name, select template and check Enable.

Step 4. Click Next. System displays Alarm Source and Operation interface.
Step 5. Click . System displays Add Alarm Source and Link Operation 1 box, see
Figure 8- .
73
Figure 8-
Step 6. In Alarm Source area, select alarm source and its link operation. Alarm source includes
device, video channel, alarm input channel, intelligent channel, A&C channel and system.
Different alarm source corresponds to different alarm type.
Step 7. In Corresponding Link Operation area, select link operation. Link operation includes
Record, and TV Wall.
For link operation, if you select record, you shall select video channel under Record tab, and
set record time.
Note:
If you need pre-record, then select device record needed.
For link operation, if you select email and sms, you shall select contacts for both. You can
click to all alarm contacts.
When link level is video wall, you shall add alarm video wall task first, before selecting
corresponding video wall in link level. Please refer to Ch 8.2.5.
Step 8. Click Save. System prompts a message Successfully save scheme rule!.
Step 9. Click OK.
Step 10. Click Next. System displays Alarm Preview interface as in Figure 8- .
74
Figure 8-
Step 11. Click Finish.

When alarm occurs, system performs link operation according to Alarm Scheme settings, and
shows alarm info in Statistics>Device>Device Alarm Info.
8.3DSS Client Alarm Scheme Config

Alarm scheme configured on Client is for user of this Client.
Alarm Scheme Config

You can refer to the following steps to set alarm scheme.
Step 2. Click in Setup Manager area. System displays Alarm Scheme interface as in
Figure 8- .
75
Figure 8-
Step 3. Set scheme info.
a) Click . System displays Global interface.
b) Input Scheme Name, Description, Time, Audio and Others as in Figure 8- .
76
Figure 8-
Parameter Note
Time Set period of arming, and select level. You can select:
All-Day: All day is arming period.
Periods: Certain periods in a day are arming period. You can
add period via and delete period via .
Note:
Remaining Time Level represents periods not covered by
arming.
Audio Set audio of alarm. You can set:
Alarm Type: Select alarm type to set sound.
Audio Path: Select path of audio file by click Browse.
Loop: By selecting this cycle, alarm sound will be looped.
Listen: You can listen to the selected sound.
Resume: System can restore default setting of non-
customizable alarm type.
Others If check Map flashed when an alarm occurred, then when alarm
occurs, it will flash on E-map.
Step 4. Set Alarm Source.
a) Click or Next. System displays Alarm Source interface.
b) Select channel on the left, and in Alarm Type area, select alarm type to be armed.
77
c) Click . System will add alarm source to list on the right as in Figure 8- .
Figure 8-
Note:
If you want to delete alarm source, you shall select alarm source on the right, and click
to remove.
For alarm scheme, link video is not required, you can click OK to finish setup.
Step 5. Set Link Video
a) Click or Next. System displays Link Video interface.
b) Select alarm source on the left.

c) Select video channel under Link Video tab.
d) Click to add selected link video to area on the right as in Figure 8- .
78
Figure 8-
Note:
Double click Stay Time of added link video to edit its value.
If you want to delete added link video, you can select it and click .
e) Select alarm output device under Alarm Output tab.

f) Select whether Auto Enable Output Device or not, input stay time. In device channel list,
select channel and click to add alarm output.
You also can check Auto Enable Output Device and edit stay time for added output items.
g) Click OK. System displays added alarm scheme as in Figure 8- .
79
Figure 8-
Click in Operation column to enable alarm scheme.
When you enable scheme, you need to click in Enable Time column, select alarm time
template, and if alarm occurs within this period, it will alarm. Alarm time template shall be set
on DSS Manager Business>Alarm Config, see Ch 8.2.3.
8.4Alarm Manager
If alarm scheme is configured, when alarm occurs, Alarm Manager displays corresponding alarm.
Step 1. In homepage, Click in Basic area. System displays Alarm Manager interface as
in Figure 8- .
80
Figure 8-
Step 2. Select alarm info, double click alarm details.

Step 3. Select process, input Results and click OK.
You can click in to quickly enter Alarm
Manager interface.
Click Alarm List tab, systems displays all alarms by level.
Click Search List tab, select corresponding channel in list on the right, and select Alarm
Type, Start Time and End Time. Click Search to search alarm records meeting above
criteria.
Click System Event tab, system shows all system alarms.
81
9 TV Wall
DSS Platform supports video wall, and you must add decoder or matrix device on Manager and
then configure TV wall before you can configure TV wall task and output to video wall on Client.
9.1Add Decoder or Matrix Device

Step 2. Select General>Device>Decoder.
Step 3. Click Add. System pops up Add Decoder box, see Figure 9- .
Figure 9-
Parameter Note
Device Type Include NVD, SVDS, UDS.
Device decoding mode, include pull stream, direct and push stream.
Decode Mode
Pulldecoder gets stream via DSS series server.
Directdecoder gets stream directly from device.
PushDSS series platform push stream to decoder.
It is pull by default.
82
Parameter Note
Warning
If you want to output Hikvision device to wall, then you shall add
decoder as NVD or add matrix as M60, select pull for decoding
mode.
Combine If decoding supports to combine, check Support to Combine.
9.2Config TV Wall on DSS Manager

Step 1. Select Business>TV Wall. System shows TV wall config interface.
Step 2. Click . System pops up Add TV wall interface, see Figure 9- .
Figure 9-
Step 3. Enter TV wall scheme name, and click , select layout to be 1*1, 2*2,
3*3, or 4*4. See Figure 9- .
You also can click to customize TV wall layout.
83
Figure 9-
Note:
Press Ctrl and now you can select more than one screen. Click on the right to
combine selected screens. You can cancel combination by clicking on . Before you
combine screens, you must add video wall equipment.

Double click the screen or right-click and select Properties. In the pop-up box, you can set
exact position, size and name of screen.
Select a screen, and right click to delete or rename the screen.
Step 4. Click Next. System displays Select decode channel interface.

Step 5. In Device Tree, select decoder and drag it to corresponding TV wall. See Figure 9- .
84
Figure 9-
Note: Right-click can cancel current binding and rename screen.
Step 6. Click Next. System displays Enable interface.

Step 7. Check Apply Now.
Note: If you do not check Apply Now, then you cannot select this TV wall on Client.
Step 8. Click Finish.
9.3Config TV Wall Task on DSS Client

Via selecting TV wall schemes and bind video with TV wall to output video to wall.
Step 1. Click in Basic area.
System displays TV Wall interface.
Step 2. Click at the upper-left corner, select TV wall scheme.
Step 3. Drag channel on the right to corresponding screen of TV wall to bind.

See Figure 9- .
85
Figure 9-
No. Interface Note
1 TV Wall Scheme
click to search all TV wall schemes added
on Manager-end.
click to search all added TV wall tasks.
Save task.
2 TV Wall Plan
add schedule plan.
add tour plan.
3 Tour, clear enable/disable the window tour.
clear.
86
Video Window You can create independent video window on free
4
Operation Buttons drawing box as freely open window.
audio. Multiple audio is ON, one audio will not

replace its previous audio, it support mixed audio.
paste.
Click physical is pasted to related windows.

When paste physical screen, support to open
window by rule.
: start/stop tour.
oen four windows on the video window.
maximize windoe.
close video window.

Video Window
5
6 Output to wall, Tour

instant output to wall, when complete this
task, system auto output to wall.
click to output to wall.
enable/disable tour plan.
7 Split
screen
split, may split 1~64 screens.
customize screen split.
clear.
screen ON/OFF.
87
8 Operation
one-key switch. Window video bit stream
type switch, as main stream, sub scream and

preview stream. Window video source tour time
interval setup.
Preview stream is non-compression signal on

wall,as raw data output to wall.
multi-selection buttons.
Click multiple window or pane multiple windows,
click may select multiple video windows at
the same time.
9 Operation Screen, window, channel binding info
Click , you can view if it is the channel you want

at the lower-right preview.
Click , to adjust order.
Click to delete added window signal source.
10 Channel List
11 Video Preview Double click video channel, auto add to window. In
Window channel binding info bat, click , to preview video.
Step 4. Click .
Step 5. Input Task Name, click OK.
Step 6. Click to complete.
You also can customize TV wall plan to output video to wall. Please refer to Ch 4.3.2.
88
10 Audio Intercom
Via audio talk, you can talk to front-end device and broadcast.
10.1 Audio Talk

Audio talk allows Client to talk to a single front-end device.
Step 1. Click in Basic area. System displays broadcast interface, see Figure 10- .
Figure 10-
Step 2. Click Audio Talk tab in the upper-right. System shows Audio Talk interface.
Step 3. Select a device to talk.
Note:
Audio talk is valid to device only, not to channel.
Step 4. Click . System shows interface as in Figure 10- .
89
Figure 10-
Step 5. Set Sampling Rate, Sampling Digit, and Audio Format, click OK. If config match device,
system will inform you that audio talk is successfully enabled, see Figure 10- .
Figure 10-
Note:
If config do not match device, system will inform you that failed to enable audio talk, and
show recommended parameter. You can config based on the recommended parameter.
During audio talk, click to end audio talk.
90
10.2 Broadcast
Broadcast allows the Client to broadcast with multiple front-end devices.

Step 1. Click Broadcast tab in Audio Talk interface. System shows Broadcast interface.
Step 2. Select multiple devices on the right. The selected devices will be displayed in broadcast
list.
Step 3. Click . System displays Broadcast setup interface, see Figure 10- .
Figure 10-
Step 4. Set Sampling Rate, Sampling Digit and Audio Format.

Step 5. Click OK.
If config match device, then you enable broadcast successfully and device in list will show
enable status, see Figure 10- .
91
Figure 10-
During broadcast stats, click to end broadcast.
92
11 Video Intercom
Video intercom supports call, remotely unlock, send message, alarm search and etc.
11.1 Config Device

VTO Setup
Step 1. Login VTO web.
Step 2. Select Network>SIP Server.
Step 3. Configure platform address, port is 5080, see Figure 11- .
Figure 11-
Step 4. Select Network Config.

Step 5. Set building/unit no. and call number, see Figure 11- .
93
Figure 11-
Step 6. Select Local Config>A&C Manager.

Step 7. Set unlock password and duress password, check to enable button.
Step 8. Set auto snapshot, select Turn On, and when you swipe card at VTO, client will receive
the snapshot picture, see Figure 11- .
Figure 11-
If you complete this operation on DSS, you can see device platform connection status on VTH
devices homepage as online/offline. (Just enter VTO IP, config VTO name)
94
VTH Setup
Step 1. Login VTH and go to Settings>Project Settings.
Step 2. In Local Config, config VTH room no. and network address, see Figure 11- .
Figure 11-
Step 3. In SIP server config platform address and port (50800, and enable. You cannot modify
other info, see Figure 11- .
Figure 11-
Step 4. In Network, configure corresponding VTO address, and enable, see Figure 11- .
95
Figure 11-
Step 5. Set status check. When you complete basic config info, in VTO homepage, view device
config stauts. If there is no X shown, the config is normal. See Figure 11- .
Figure 11-
Note:
The first picture represents VTH connection status, and the second picture represents VTH
registration status on VTO. X means that registration failed. (After you configure VTH, reboot
the device, and it will be linked to platform according to VTO.)
a) VTH zone setup
96
On VTH, click Security>Zone Status, configure zone info of each channel (zone config login
password is 123456.), and you can switch NO/NC status to trigger alarm; in alarm record,
you can view alarm record of each zone.
b) VTH DND mode
On VTH, click User Settings>DND configure DND time, see Figure 11- .
Figure 11-
11.2 Add Device on DSS Manager

Step 2. Select General>Device>Video Talk.
Step 3. Click Add. System pops up Add Video Talk Device box, see Figure 11- .
97
Figure 11-
Step 4. Configure VTO info parameter, click Add. You only need to add VTO since VTH will be
auto linked to platform via VTO.
11.3 Video Intercom Function on DSS Client

Video Talk
After you have added VTO and VTH, on DSS Client, go to Video Talk, and see the device tree on
the left in the interface. Building no., unit no. reported by each device will auto generate device
organization tree.
Step 2. Select in Basic area. System shows Video Talk interface, see Figure 11- .
98
Figure 11-
According to building no., unit no., and other VTHs reported by the device, it will auto generate
contacts.
If a user wants to call a unit VTO via client.
Click on VTO.
Call is one-way from clien to VTO only.

System pops up a box, see Figure 11- .
99
Figure 11-
1). Click .
2). System pops up confirmatio box, click OK.

You can unlock remotely.
3). Click to stop call.
Call box will not be closed.

If a user wants to call a specific VTH from client.
1). Click on VTH.
Call is bidirectional between client and VTH.

System pops up a calling box, see Figure 11- .
100
Figure 11-
2). When VTH accepts call, the user can start a bidirectional talk.
See Figure 11- .
Figure 11-
VTH does not accept call in 60s, then client will prompt user and ask if he/she wants to
redial. The user may click again to redial.
101
If the VTH being called is busy, client will prompt user to call again later.
If the VTO is calling the client.
Client pops up VTO calling box, see Figure 11- .
Figure 11-
You can click , to accept VTO call, and start a bidirectional talk.
Also you can click to unlock.
If the VTH is calling the Client.

Client pops up VTH call box, see Figure 11- .
102
Figure 11-
You can click to talk with VTH.
If there is missing call, you can click missing call shown in red Call Record at the lower-right
corner in Talk interface, see Figure 11- .
Figure 11-
Click , you can call back.
You also can view ALL of call records.
On the right, there are , here enter call number to fuzzy search.
In on the right, you also can directly dial VTO to call VTH either one-way or
bidirectionally.
Send Message
In Message Publish interface, you can add announcement or notice, which can be sent to each
VTH and users can view them on VTH.
Event Search
In Event Search interface, you can search for alarm event and unlock type. You also can learn
about time of alarm, device location when alarm occurs, plus alarm status.
103
12 People Statistics
The system currently supports to add people statistical information by day, week, month and
year.
12.1 Add Smart IPC Device

Before using this statistical function, you must add SmartIPC device on DSS Manager.
Step 2. Select General>Device>Encoder.
Step 3. Click Add. System pops up Add Encoder box.
Step 4. Configure parameter info, select Smart IPC for device type, check People Count box.
See Figure 12- .
Figure 12-
Step 5. Click OK.
12.2 People Statistical Report

104
Step 2. Click in Extension area.
Step 3. On the left, select device channel, configute alarm type, statistical time, click Search.
See Figure 12- .
Figure 12-
Step 4. Click HeatMap. See Figure 12- .
105
Figure 12-
106
13 Access Control
Access control function supports to unlock door, process alarm information and bind video.
13.1 DSS Manager Device

Add A&C Device
Step 2. Select General>Device>Access Control.
Step 3. Click Add. System pops up Add A&C box, see Figure 13- .
Figure 13-
Step 4. Configure access control parameter, click OK.
Unlock Timeout Config

The system supports to configure timeout unlock. If a user unlocks door over this time threshold,
then it will link to alarm.
The higher the level, the higher the threshold value will be.
Step 1. Select Business>Unlock Overtime.
107
Step 2. Enter alarm level name and threshold value, see Figure 13- .
Figure 13-
Step 3. Click Submit.
Link Video
DSS Manager supports to bind video resource to A&C. When A&C has alarm, it will play bound
video resource.
Step 1. Select Business>Link Video>A&C.
Step 2. Click . See Figure 13- .
108
Figure 13-
Step 3. Select A&C source and linked video channel.

Step 4. Click OK.
13.2 Access Control

Step 2. Click in Extension area.
Step 3. In device list on the right, select different A&C devices, so it will show different A&C
unlock information, door sensor and overtime alarm.
See Figure 13- .
109
Fig
Figure 13-
You can view lock/unlock, door sensor, overtime alarm information in each of the following tab.
Step 4. Double click alarm record below, you can view alarm details.
110
14 Alarm Controller
DSS platform supports to manage alarm controller, and to arm, disarm, bypass alarm controller.
14.1 Add Alarm Controller Device

Step 2. Select General>Device>Alarm Controller.
Step 3. Click Add.
System pops Add Alarm controller box. See Figure 14- .
Figure 14-
Step 4. Configure parameter info, click OK.

Step 5. Refer to Ch 13.1.1 to configure linked video of alarm controller device.
14.2 Alarm Controller

Step 2. Click , system shows Alarm controller interface.
111
Alarm controller interface shows all added alarm controller device and zone, the shown device
status includes online, offline, alarm, bypass, arm and disarm. You can filter device by status.
On the right, select different alarm controllers which lead to different zones. Select root, to show
all zones. See Figure 14- .
Figure 14-
You can batch select device and zone to arm and disarm. Double click zone, to view zone details
and monitoring video. Double click alarm info, system pops up alarm details page.
You can view current live preview and record video, and process current alarm. Processing
status includes processed, pending, in progress, miss-alarmed and ignored. Processes status
will be shown in status in alarm info list.
112
15 Statistics
15.1 Statistics
DSS Manager supports search of server statistics, device statistics, management statistics,
operation statistics and user statistics. The detailed steps are skipped here.
Overview
DSS Manager supports real-time statistics of server and device online status, and supports
search for alarm history and channel real-time analytics of server and device.
Step 1. Open Statistics>Overview interface. See Figure 16- .
Figure 16-
Step 2. Click Details next to Device Real Time Online Statistics or graph below to enter
corresponding Statistics>Device>Device Online Statistics tab to view device real time online
alarm info.
See Figure 16- .
113
Figure 16-
Step 3. Click Statistics Type on the bottom in Overview interface. You will see Figure 16- .
114
Figure 16-
Step 4. Check designated type and click OK.

Step 5. Enter start time and end time. Click Search to search corresponding type info.
15.2 Video Quality Analytics

DSS platform supports video quality analytics, first please set video analytics, analytics task,
analytics scheme on Manager, and then you can view result of analytics on Client.
Step 2. Select Business>Video Analytics.
Analytics item config: used to config video analytics.
Task config: used to config video analytics task.
Scheme config: used to config video analytics scheme template.
Config Analytics Item

Step 1. Select Video Analytics>Video Analytics.
115
Step 2. Click . System pops up Add Analytics Item Config box.
Step 3. Configure name and select analytics item, see Figure 16- .
Figure 16-
Step 4. Click OK. The added analytics item is shown in Analytics Config interface. You can
modify and delete existing analytics item.
Configure Analytics Task
Step 1. Select Video Analytics Config>Task Config.
Step 2. Click . System pops up Add Task Config box, see Figure 16- .
116
Figure 16-
Step 3. Configure task name, single channel analytics overtime, analytics item config and etc.
Note:
Single channel analytics overtime: analytics of each channel required time.
Step 4. Check alternate channel, and click Add to add channel below selected channel.
Step 5. Click OK.
Configured task is shown in task config list. You can view, modify and delete added task.
Config Analytics Scheme

Step 1. Select Video Analytics Config>Scheme Config.
Step 2. Click . System pops up Add Scheme Config box.
Step 3. Configure scheme name and check Enable.
Step 4. Under alternate task box, select alternate task, and click to add task to selected
task.
Note:
The system supports multiple task.
117
Step 5. Configure tasks start time, see Figure 16- .
Figure 16-
Step 6. Click OK. Configured scheme will be shown under scheme config list, you can modify
and delete added scheme.
View Video Diagnosis Result

Step 2. Click in Extension area. System shows Video Analytics>Abnormal Analytics
interface, see Figure 16- .
118
Figure 16-
Step 3. Click Diagnosis Result tab, you can view all video analytics content.
See
119
Figure 16-
Click : view channel analytics history.
Click : view channel live preview.
Click : palyback channel record.
120
16 Other DSS Manager Operations
16.1 Server Management
DSS Manager provides server management. Server management has center unit and
distribution unit.
Center
Dual hot spare not added
Step 1. Open General>Server>Center Unit. You can see operation status of center unit host. See
Figure 17- .
Figure 17-
Step 2. Click , you can view name, server type, IP and status of center unit, video unit and
picture unit in main server center unit. See Figure 17- .
Figure 17-
Dual hot spare added

Click open General>Server Config>Center Unit interface, you can view center unit and
spare operation status of center unit. See Figure 17- .
121
Figure 17-
Distribution unit
Step 1. Open General>Server>Distribution Unit interface, you can view operation status
of master/slave mode server. See Figure 17- .
Figure 17-
Step 2. Click or , you can edit or delete distribution unit.
Click , you can enter initalization interface.
Step 3. Click , you can view video server name, server type and IP status. See
Figure 17-
16.2 Cascade
DSS Manager supports cascading configuration. You can set Domain, Domain Service of other
zones. After cascading, you can manager lower organization and device.
Before configuring cascading, you must obtain the IP address and port where lower-level CMS
server is installed, and IP address and port where WEB server is installed.
Step 1. Select Cascade>Domain. System displays Domain interface.
Step 2. Click . System pops up Add Domain box, see Figure 17- .
122
Figure 17-
Step 3. Input Name, CMS IP address, CMS port, CMS username, CMS password, WEB IP
address, WEB port.
Step 4. Click OK. After configuration, select General>Org. Here you can view added domain or
device info. You can select Cascade>Domain Service to view online status of domain.
16.3 System Config

Upload
DSS supports uploading file to CMS.
Step 1.Select System>Upload. System displays Upload interface.
Step 2.Click . System pops up Upload File box, see Figure 17- .
Figure 17-
123
Step 3.Click Browse to select file to upload.
Step 4.Click Import to upload selected file.
Backup and Restore

DSS supports config info backup to local PC, and restoration of the backup file.
Note:
Only system user can backup and restore.
16.3.2.1 System Backup
System backup detailed step:
Step 1. Select System>Backup Restore, see Figure 17- .
Figure 17-
Step 2. Check info to backup. For example, Org, Account.

Step 3. Click on Backup.
Step 4. Click on Save, system pops up Save as box.
Step 5. Select storage path and click on Save. System prompt when downloading is complete.
Step 6. Click on Close.
16.3.2.2 Restore
You can select backup file to restore system.
Step 1. Select System>Backup Restore.
Step 2. Click on Browse in Restore area.
Step 3. Select backup file.
Step 4. Click on Restore.
Step 5. Input password user system.
Step 6. Click on OK.
Step 7. System will restore, and system need to be rebooted.
Resource Re-Config
You can re-configure DSS server resource and parameter.
124
16.3.3.1 Video Server
Step 1.Select System>Resource Re-Config.
Step 2.Click Video Server.
Step 3.Drag device on the left into server. See Figure 17- .
Figure 17-
: You can select one device, and click Auto Allocation so system will
automatically allocate device to one server.
: You can restore previous operation.
:Enter device name, click Search to search device.
16.3.3.2 Parameter Re-Config

You can modify device username, password and organization together.
Step 1. Select System Config>Resource Re-Config.
Step 2. Click Parameter Re-Config.
Step 3. In device list on the left, check device.
You can select more than one device at the same time, and all of checked device will be
shown in the area at device to be batch modified.
Step 4. Check Modify username password, to batch modify device username and password.
Step 5. Check Re-config organization to batch modify device organization.
Step 6. Click Save.
125
17 WEB Client
DSS supports B/S format client. Via login WEB Manager, you can set local config, preview,
playback, TV wall and E-map.
17.1 Login WEB

To log in WEB:
Step 1. In Internet Explorer, input IP address of DSS, and press Enter. System shows login
interface as in Figure 18- .
Figure 18-
Step 2. Click , system prompts to download Plugin.exe.
Step 3. Download and install Plugin.exe.

Step 4. In Internet Explorer, input IP address of DSS, and press Enter.
Step 5. In login interface, input username and password. Select user type as Operator.
Step 6. Click Login. See Figure 18- .
126
Figure 18-
17.2 Setup
Please refer to Ch 2.2.3.
17.3 Video Monitor

Preview
Please refer to Ch 5.
Playback
TV Wall
17.4 Map
127
Note:
This manual is for reference only. Slight difference may be found in the user interface.
All the designs and software here are subject to change without prior written notice.
All trademarks and registered trademarks are the properties of their respective
owners.
If there is any uncertainty or controversy, please refer to the final explanation of us.
Please visit our website or contact your local service engineer for more information.
128

DSS User's Manual V6.01.000 201602

Uploaded by

Copyright:

Available Formats

DSS User's Manual V6.01.000 201602

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

DSS User's Manual V6.01.000 201602

Uploaded by

Copyright:

Available Formats

DSS Users Manual

2.1 Initialization Setup.................................................................................................................. 2

2.2 System Config on WEB......................................................................................................... 4

3 ADD ORGANIZATION AND LOGIN USER............................................................................9

3.1 Add Organization.................................................................................................................... 9

3.2 Add User Role....................................................................................................................... 10

3.3 Add User................................................................................................................................ 12

4 DSS CLIENT INSTALLATION AND LOGIN.........................................................................14

4.1 Requirement for PC.............................................................................................................. 14

4.4 Local Config.......................................................................................................................... 17

5.2 Local Data.............................................................................................................................. 23

5.4 Tour Task............................................................................................................................... 26

6.1 Configure Storage Plan........................................................................................................ 38

7.1 Raster Map............................................................................................................................ 50

7.2 Google, Google Offline Map Config....................................................................................53

8.1 Device-end Config................................................................................................................ 64

8.2 Config DSS Manager Alarm Scheme...................................................................................65

8.3 DSS Client Alarm Scheme Config.......................................................................................73

8.4 Alarm Manager...................................................................................................................... 78

9.1 Add Decoder or Matrix Device.............................................................................................80

9.3 Config TV Wall Task on DSS Client.....................................................................................83

10.1 Audio Talk.............................................................................................................................. 87

11.1 Config Device........................................................................................................................ 91

11.2 Add Device on DSS Manager............................................................................................... 95

11.3 Video Intercom Function on DSS Client.............................................................................96

12.1 Add Smart IPC Device........................................................................................................ 102

12.2 People Statistical Report.................................................................................................... 102

13.1 DSS Manager Device.......................................................................................................... 104

13.2 Access Control................................................................................................................... 106

14.1 Add Alarm Controller Device.............................................................................................109

14.2 Alarm Controller.................................................................................................................. 109

15 INTELLIGENT DEVICE (OPTIONAL)................................................................................112

15.1 Behavior............................................................................................................................... 112

15.3 Smart Track......................................................................................................................... 113

15.4 People Count....................................................................................................................... 115

15.5 Master/Slave Tracking........................................................................................................ 116

16.1 Statistics.............................................................................................................................. 118

16.2 Video Quality Analytics...................................................................................................... 120

17 OTHER DSS MANAGER OPERATIONS...........................................................................125

17.1 Server Management............................................................................................................ 125

17.2 Cascade............................................................................................................................... 126

17.3 System Config..................................................................................................................... 127

18.1 Login WEB........................................................................................................................... 130

18.2 Setup.................................................................................................................................... 131

18.3 Video Monitor...................................................................................................................... 131

18.4 Map....................................................................................................................................... 131

DSS Client currently has four formats:

System IP Address Config

How to get the IP of DSS

Other Basic Config

Step 2. Storage config.

Step 3. Link config.

i. Configure parameter, click Application. SMTP servers listening port is 25 by

Default username is system. Default password is 123456.

Step 1. Login DSS Manager.

Step 5. Enter number of channels you want to purchase, click Export.

System Parameter Config

CMS IP Address IP address of manager server

LAN Port LAN port of manager server, default is 9000