IS : 1200 ( Part 14 ) - 1984

( Rcallirmed 1994 )
hdiun Standard ( Reaffirmed 1997 )

METHOD OF MEASUREMENT OF BUILDING

AND CIVIL ENGINEERING WORKS
PART 14 GLAZING

f ThirdRevision
Second Reprint AUGUST 1997

UDC! 69.003.12:698.3

@ Copyright 1985

BUREAU OF INDIAN STANDARDS

MANAK BHAVAN, 9 BAHADUR SHAH ZAFAR MARG
NEW DELHI 110002

Gr 2 February 1985
 IS t 1200 ( Part 14 ) - 1984
(RenWmed1991)

Indian Standard
METHOD OF MEASUREMENT OF BUILDING
AND CIVIL ENGINEERING WORKS
PART 14 GLAZING

( Third Revision-)
Method of Measurement o Works of Civil Engineering
( Excluding River Val fey Projects >, BDC 44
Chairman Representing
SHRI A. C. PANCHDHARI Central Vigilance Commission, New Delhi
Members
ADHISHASI ABAYANTA ( PARSHIKSAN) Public Works Department, Lucknow
DEPUTY DIRECTOR ( GAWESHAN) ( Alrernate )
SHRI B. G. AHUJA Builders Association of India, Bombay
SHRI K. D. ARCOT Engineers India Limited, New Delhi
SHUI T. V. SJTARAM( Alternate )
SHRI N. K. AROMA Bhakra Management Board, Nangal Township,
Chadigarh
SHRI R. M. JOLLY ( Alternate )
SHRI G. B. BAJAJ Bombay Port Trust, Bombay
~HRI P. BANEHJEB Ministry of Shipping and Transport ( Roads
Wing )
SHR~ R. G. T~AWANI ( Alternate )
SHRJ G. K. DESHPANDE Publia Works Department, Bombay
DIRECTOR ( IRI ) Irrigation Department, Government of Uttar
Pradesh, Lucknow
DIRECTOR ( RATES AND COSTS ) Central Water Commission, New Delhi
DEPUTY DIRECTOR(RATES
AND COSTS) (Alternate)
SHRI P. N. GADI Institution of Surveyors, New Delhi
SHRI D. S. TAMBANKAR ( Alternate )
SHRI P. S. HARI RAO Hin2esEtay Construction Company Limited,

SHRI N. M. DA~TANE( Alternate)

SHRIG.B. JAHAGIRDAR The National Industrial Development Corpora-
tion Limited, New Delhi

( Continued on page 2 )
@ Copytight 1985
BUREAU OF INDIAN STANDARDS
This publication is protected under the Indian Copyright Acr ( XIV of 1957 ) and
reproduction in whole or in part by any means except with written permission of the
publirher shall be deemed to be an infringement of copyright under the said Act.
AS : 12QO( Part 14 ) - 1984
( Continuedfrom page 1 )
Members Representing
JOINTDIRECTORCD ) National Buildings Organization, New De!h!
SHRI A. K. LAL ( Alternate )
SHRI ASHIT RANJAN KAR Calcutta Port Trust, Calcutta
SHRIS.K. LAHA Institution of Engineers ( India ), Calcutta
SHRI K. K. MADHOK MES Builders Association of India ( Regd ),
New Delhi
6r-fti.R. K. BAHL (Alternate )
SHRI DAITA S. MALIK Indian Institute
\
of Architects, Bombay
PROF M. K. GODBOLE ( Alternare)
SHRX R. S. MURTHY Gammon India Limited, Bombay
SHRIH. D. MATANGE ( Alternate )
SHRI C. B. PATBL M. N. Dastur and Company Private Limited,
Calcutta
SHRI B. C. PATEL( AZternate )
SHRIK. A. PATNAXK Bureau of Public Enterprises, New Delhi
SHRI V. G. PATWARDHAN Ministry of Defence
SHRI C. G. KARMARKAR ( Alternate )
DR R. B. SINGH Banaras Hindu University, Banaras
SHRI R. A. SUBRAMANIAM Hindustan Steel Works Construction Limited,
Calcutta
SUPERINTENDING SURVEYOROF Central Public Works Department, New Delhi

SHRI G. RAMAN, Director General, Is1 ( Ex-officio Member )

Director ( CIV Engg )

Secretary
SHRI K. M. MATHUR
Senior Deputy Director ( Civ Engg ),

2
 ?S : 1200 (Part 14 ) - 19SJ

Indian Standard
METHOD OF MEASUREMENT OF BUILDING
AND CIVIL ENGINEERING WORKS
PART 14 GLAZING

( Third Revision )
0. F 0.1~ E W 0 R D
n
v.1* -h-t_:_
11115*_A:_._
~IIUIZIIF,__>__., f, n__&
r>~iluuaicl 1 \ I v-,. 3 l-3-z--._ \
rart 14 I \ 1 nlru nevlsnon
.~ _>- ~_ 3 I.- .,
1 was auoprea oy rnC
Indian Standards Institurio.1 on 12 December 1981, after the draft finalized
by the Method of Measurement of Works of Civil Engineering ( Excludimr
River Valley Projecis 1 Sectional Committee had been approved by the Civs
Engineering Division Council.

0.2 Measurement occupies a very important place in the planning and

execution of any civil engineering work from the time of first estimates io
the final completion and settlement of payments of the projtct. The
methods followed for the measureme:lt are not uniform, and considerable
.._
dtnerences exist between the practices foiiowcd by one construction agency
and another and also between various Central and State Government
departments. While it is recognized that each system of measurement has
to be specifically related to the administrative and financial organizations
within the department responsible for the work, a unification of the
various systems at the technical level has been accepted as very desirable,
specially as it permits a wider circle of operation for civil engineering
contractors and eliminate ambiguities and misunderstandings arising out
of inadequate understanding of the various systems followed.

0.3 Among the various civil engineering items, measurement of building

had been the first to be taken up for standardization and a consolidated
standard ( IS : 1200 j, having provisions relating to building works, was firat
published in 1958 and subsequently revised in 1964 and 1970.

0.4 In the course of usage of this standard by various constructiocr

agencies in the country, several clarifications and suggestions for modifica-
r:,.,,
L,,,s ._.,...^
wc;,I; ,--,.:...1
,c;Lc,c;u and as a iesult of st.tdy, AL..Lilt; P~~c:~-irl
3ecLllal 0-&-:*L-
LIIIIIILLLCL
responsible for the preparation of this standard decided that its scope
besides being applicable to building, should be expanded so as also to
cover the method of measurement applicable to civil engineering works,
such as industrial and river va!ley project works.

3
IS : 1200 (Fart 14 I- 1981

0.5 Since measurement of one type of trade is not related to that of

another one, and aiso to facilitate the second revision of IS : 1200 - 1964*,
the Sectional Committee decided that each type of trade as given in IS:
1200-I 964* be issued separately as diflcrent parts. This will also be helpful
to the specific users in various trades in using the standard.

0.5.1 This part 14 covering glazing was, therefore, issued as a separate

standard for the first time in 1970 and has now been revised in order
to keep the provisions in line with the latest practice.

0.6 For the purpose of decid;ng whether a particular requirement of this

standard is complied with the tinal value, observed or calculated, express-
ing the result of a measLI<ement, shall be rounded ofT in accordance with
1s : 2-1960t 7he number of significant places retained in the rounded off
va!ue should be the same as that of the specified value in this standard.

1. SCOPE

1.1 This standard ( Part 14 1 covers the method of measurement of glazing

n buildings and civil engineering works.

2. GENERAL RULES
2.1 Clubbing of Items - Ttems may be clubbed together provided these are
on the basis of the detailed dcsc tion of items stated in this standard.

2.2 Booking of Dimensions - In booking dimensions, the order shall be

consistent and generally in the sequence of length, breadth or width and
eight or depth of thickness.

2.3 Description of Items - 7 he description of each item shall, unless

stated otherwise, be held to include, where neecessary, conveyance and
elivery, handling, loading, unloading, storing and waste.
1

2.4 Measurements - All works shall be measured net in decimal system, as

fixed in its place as given in 2.4.1 and 2.4.2.

2.4.1 Dimensions shall be measured to the nearest 001 m.

2.4.2 Areas shall be worked out to the nearest 001 m.

2.5 Bills of Quantities - The bills of quantities shall fully describe the

*Method of measurement ofbuilding and civil engineering works (revised).

tRules for rounding off numerical values ( revised ).

4
L _---_...
.- __.- I_--_I--~

IS : 1200 ( Part 14 ) - 1984

materials and workmanship, and accurately represent the work to be

executed.
2.6 The various kinds of sheets for glazing like glass and other materials
shall be described and shall be measured separately. In the case of wired
glass design or pattern of reinforcement shall be described and in case of
frosted glass it shall be stated whether it is on one or both sides.

2.7 Work in wood, metal concrete and the like shall be measured
separately.

2.8 The method of glazing shall be described and measured separately

under the following classification. The type and putty shall also be
described:

a) Front and back putty and sprigged or fixed with glazing pins,
b) Bedded in putty and fixed with beads, and
c) Bedded in rubber or velvet and fixed with beads (wherever
required).

3. METHOD OF MEASUREMENT

3.1 Work shall be measured in square metres stating the thickness.

3.1.1 The dimensions of each pane shall be clear dimensions of opening

plus width of rebates of structural member of window/door. The pane
other than rectanguiar or square shaii be measured as the smaliest rectan-
gular area from which pane can be cut. Straight cutting shall be deemed
to be included in the item.

3.2 Circular cutting shall be measured as extra in running metres. The

term circular shall be deemed to include any form of curve.

3.3 Glass and sheet louvres shall be described and enumerated.

3.4 Hacking-out old broken glass and preparing for new glass shall be
measured in square metres.

3.5 Holes drilled in work shall be enumerated stating diameter of the hole,
type and thickness of the glass/sheet and size of the pane.

3.6 Grinding, polishing and rounding off edges of glass or glazing sheet
shall be described and measured in running metres.

.
BUREAU OF INDIAN STANDARDS
Headquarters:
Manak Bhavan, 9 Bahadur Shah Zafar Marg, NEW DELHI 110002
Telephones: 323 0131,323 3375,323 9402
Fax : 91 11 3234062,91 11 3239399, 91 11 3239382
Telegrams : Manaksanstha
(Common to all Officesj
Central Laboratory : Telephone
Plot No. 20/9, Site IV, Sahibabad industrial Area, Sahibabad 201010 8-77 00 32
Regional Offices:
Central : Manak Bhavan, 9 Bahadur Shah Zafar Marg, NEW DELHI 110002 3237617
*Eastern : l/l 4 CIT Scheme VII M, V.I.P. Road, Maniktola, CALCUTTA 700054 337 86 62
Northern : SC0 335-336, Sector 34-A, CHANDIGARH 160022 60 38 43
Southern : C.I.T. Campus, IV Cross Road, CHENNAI 600113 235 23 15
twestern : Manakalaya, E9, Behind Maroi Telephone Exchange, Andheri (East), 832 92 95
MUMBAI 400093
Branch Offices::
Pushpak, Nurmohamed Shaikh Marg, Khanpur, AHMEDABAD 380001 550 13 48
$Peenya Industrial Area, 1 st Stage, Bangalore-Tumkur Road, 839 49 55
BANGALORE 560058
Gangotri Complex, 5th Floor, Bhadbhada Road, T.T. Nagar, BHOPAL 462003 55 40 21
Plot No. 62-63, Unit VI, Ganga Nagar, BHUBANESHWAR 751001 40 36 27
Kalaikathir Bu,ildings, 670 Avinashi Road, COIMBATORE 641037 21 01 41
Plot No. 43, Sector 16 A, Mathura Road, FARIDABAD 121001 8-28 88 01
cI_..:*..: ~_-_I_._ ..,.,-.T
3av,tr, ~lI,p,ax, I ID u. I. n___l
ouao, *lln_)l~~rh~rr.rrr\.
nnLl~r>nv C I I 8-ii is96

5315 Ward No.29, R.G. Barua Road, 5th By-lane, GUWAHATI 781003 5411 37
5-8-56C, L.N. Gupta Marg, Nampally Station Road, HYDERABAD 500001 201083
E-52, Chitaranjan Marg, C-Scheme, JAIPUR 302001 37 29 25
1171418 B, Sarvodaya Nagar, KANPUR 208005 21 68 76
Seth Bhawan, 2nd Floor, Behind Leela Cinema, Naval Kishore Road, 23 89 23
LUCKNOW 226001
NIT Building, Second Floor, Gokulpat Market, NAGPUR 440010 52 51 71
Patliputra Industrial Estate, PATNA 800013 26 23 05
Institution of Engineers (India) Building 1332 Shivaji Nagar, PUNE 411005 32 36 35
T.C. No. 14/l 421, University P. 0. Palayam, THIRUVANANTHAPURAM 695034 621 17

*Sales Office is at 5 Chowringhee Approach, P.O. Princep Street, 27 10 85

CALCUll-A 700072
$Sales Office is at Novelty Chambers, Grant Road, MUMBAI 400007 309 65 28
SSales Office is at F Block, Unity Building, Narashimaraja Square, 222 39 71
BANGALORE 560002

Printed at Dee Kay Printers, New Delhi, India

 ~.

AMENDMENT NO. 1 MAY 2002 ~~

TO r

IS 1200( Part 14 ) :1984 METHOD OF MEASUREMENT

OF BUILDING AND CIVIL ENGINEERING WORKS
PART 14 GLAZING

(Third Reviswn )

( Page 5, clause 3.1.1,last sentence ] Substitute the following for the

existing sentence:
Cutting to make a circumscribing rectangle shall be deemed to be included in
the item.
( Page 5, clause 3.2) Substitute the following for the existing clause:
3.2 Cutting required for panes other than rectangular or square shall also be
deemed to be included in the item. The shape required shall be detailed in the
drawings or otherwise desired.

( CED 44 )

Reprography UniQ BIS, New Delhi, India