Dynamic Test Report of DECR-S Excitation Devices: Experimenter
Dynamic Test Report of DECR-S Excitation Devices: Experimenter
Dynamic Test Report of DECR-S Excitation Devices: Experimenter
Experimenter: *f-W ~
Audit
Sanction
Date: 2012.8.24
_--===[:::D=E=C=R=-=S=M=I=C=R=O=C=O=M==PU=T=E=R==E=X=C=I=TA==T=IO=N==D=E=V=IC=E=S=,]===--
Parameter Settings
1 insulation test
Project Insulating resistance Test gear test result
Terminal connection cabinet enclosures 200MQ 500V Passed
DC positive and negative between 200MQ 1000V Passed
4 Testing device:
1, Oscilloscopes
2, Digital Multimeter
1.1, We can set stator current (It Base Value) and excitation current (If Base Value)
1.2, We can set stator voltage (Ut Base Value) base value in the generator No-load
Characteristics test.
1) Auto steady-state.
3) Manual steady-state.
5) Test of de-excite.
1) Auto steady-state.
3) Manual steady-state.
ONLINE
- Under-excitation limits.
- Over-excitation limits.
_
[DECR-S MICROCOMPUTER EXCITATION DEVICES]
~~~~~~~~~~~
[SYSTEM DATA]
Ie Nominal=7.5A
Potential Transformer=Three_Phase
UM Nominal=11.00kV
UM Primary=11.00kV
UM Secondary=100.00V
UNet Nominal=11.00kV
UNet Primary=11.00kV
UNet Secondary=100.00V
1M2 Nominal=984.00A
1M2 Primary=1200.00A
IM2Secondary=5.00A
Ie No Load=30.00%
Kceiling=30.00V IV
Xq=0.80
f Nominal=50.00Hz
[FIELD FLASHING]
Off Level=O.OO%
[SOFTSTART]
Starting Level=O.OO%
Hold Time=O.OOs
Ramp Time=10.00s
lV/Hz LIMITER]
fKnee=48.00Hz
Slope=100.00%
[leMin LIMITER]
Minimum=O.OO%
Active=FALSE
[leMax LIMITER]
Maximum=150.00%
Delayed=110.00%
Continuous=105.00%
Active=TRUE
[PQ LIMITER]
Minimum Q (P @ 0%)=-40.00%
Minimum Q (P @ 25%)=-35.00%
Minimum Q (P @ 50%)=-30.00%
Minimum Q (P @ 75%)=-25.00%
Minimum Q (P @ 100%)=-20.00%
Voltage Dependency=TRUE
Active=TRUE
rUM LIMITER]
Minimum=90.00%
Maximum=110.00%
Minimum Active=TRUE
Maximum Active=TRUE
[BOOST]
Treshold=40.00%
Hold Time=3.00s
Hysteresis=lS.00%
[AUTO SETPOINT]
Initial=100.00%
Minimum=90.00%
Maximum=110.00%
Ramp Rate=O.30%js
Disable CB Check=FALSE
[PF SETPOINT]
Minimum=-O.8S00
Maximum=O.8S00
Ramp Rate=O.OOSOjs
[Var SETPOINT]
Minimum=O.OO%
Maximum=100.00%
Ramp Rate=l.OO%js
[MANUAL SETPOINT]
Initial=O.OO%
Minimum=O.OO%
Maximum=150.00%
Ramp Rate=1.67%js
Initial=O.OO%
Minimum=O.OO%
Maximum=100.00%
Ramp Rate=1.00%js
[DIGITAL I/O 1]
Input=None
PolaritLIN=Normal
Output=SW _Alarm
PolaritvOtrl=tnverted
Direction=Out
[DIGITAL I/O 2]
Input=None
PolaritLIN=Normal
Output=Diode_Alarm
PolaritLOUT=Normal
Direction=Out
[DIGITAL I/O 3]
Input=None
PolaritLIN=Normal
Output=Limit Active
PolaritLOUT=Normal
Direction=Out
[DIGITAL I/O 4]
Input=Remote_Setpoint
PolaritLIN=Normal
Output=None
PolaritLOUT=Normal
Direction=ln
[DIGITAL INPUT 5]
Input=Open_Loop_Enable
PolaritLIN=Normal
[DIGITAL INPUT 6]
Input=Gen_CB_Closed
PolaritLIN=Normal
[DIGITAL INPUT 7]
Input=ParalieLWith_Grid
PolaritLIN=Normal
[DIGITAL INPUT 8]
Input=Excitation_ON
PolaritLIN=Normal
[DIGITAL INPUT 9 from +AI]
Input=None
PolaritLIN=Normal
Input=None
PolaritLIN=Normal
lnput=ManualEnable
PolaritLIN=Normal
Input=Var_Enable
PolaritLIN=Normal
Input=lncrease
PolaritLIN=Normal
Input=Decrease
PolaritLIN=Normal
[ANALOG INPUT 1]
Input=Open_Loop_Setpoint
Uin O%=O.OOV
Uin 100%=1O.00V
[ANALOG INPUT 2]
Input=Dinll&12
Uin 0%=2.00V
Uin 100%=5.00V
[ANALOG INPUT 3]
Input=Din13&14
Uin 0%=2.00V
Uin 100%=5.00V
[ANALOG OUTPUT]
Outputl=PWM
Output2=None
Uoutl O%=O.OOV
Uoutl100%=10.00V
Uout2 O%=O.OOV
Uout2 100%=10.00V
Ie 0%=0.00%
Ie 100%=300.00%
Active Power=200.0%
[TUNE AUTO]
Droop (Kq)=-4.00%
[COMMUNICATION]
AVR ID=2
Channel Identification=Main
[DIODE MONITORING]
f Exc Nominal=SO.OOHz
Tconst Exc=3S0.00ms
Active=TRUE
Alarm Level=S.OO%
Alarm Delay=10.00s
Trip Level=20.00%
Trip Delay=O.30s
[1M Limiter]
IMlim_Active=FALSE
IMlim_K=l.OO
IMlim_lm_th=100.00%
[TEMP INFLUENCE]
IMlim_T1=SO.OOC
IMlim_lm_th2=7S.00%
IMlim_ T2=60.00C
IMlim_lm_th3=SO.OO%
IMlim_T3=70.000(
IMlim_T4=80.000(
IElim_T1=SO.OOO(
IElim_le_th2=7S.00%
IElim_ T2=60.000(
IElim_le_th3=SO.00%
1Elim_ T3=70.000(
IElim_T4=80.000(
[MODBUS]
MB Slave ID=247
M B_ Protoco 1=0
MB_Bitrate=7
MB_(hrFrame=O
MB_KeepAliveTime=Os
MB_KeepAliveAction=O
MB_Enable=TRUE
MB_Delay=10.00ms