LRMP

Site Acceptance Test (SAT)
SITE ACCEPTANCE TEST (SAT)
CUSTOMER : Chilime Jalavidhyut Company Limited

PROJECT : Chilime Hydro Electric Project, 2x11.28MW
DOCUMENT NAME : 66KV Line Relay Metering Panel
DOCUMENT NO. : NICPL-137-01
Doc Type Site Acceptance Test report NICPL Doc No NICPL-137-01

Title: 66kV Line Relay Metering Panel Project Title: Chilime Hydro Electric Project 2X11.28MW
Nelumbo Icona Controls Pvt Ltd
Noida India - 201301 Sheet: 1 of 16
Introduction
This document describes the Line Relay Metering Panel item to be tested on a SAT period. The SAT will
demonstrate the operation and integration of the LRMP system and verify the hardware being supplied.
References
The following documents will be available as references during the SAT.
Ref Document Reference Description

1 NICPL-137-06-101 Wiring drawings
Manufacturer/Model Number Serial Number Cal Cert Ref Cal Exp Date
Relay tester / ISA DRTS 33 2119/48617
Digital Multimeter / Fluke 46311178WS
Health and Safety
The tests to be conducted involve test and measurement operations with hazardous voltages present. All
tests must be performed by skilled persons taking due care and attention to avoid electrical shocks. The
tests are to be performed in the stated sequence to avoid danger. All faults during electrical testing must
be rectified or deemed by a qualified and competent person not to compromise safety before further
testing can proceed.

Line Specification
Line
Chilime – Trishuli 66KV Line
Line Lenghth 39.5KM
Chilime – Trishuli 35km (Protected Line)
Trishuli-Debighat 4.5km ( Shortest Line)
Conductor Wolf
CT Ratio 300/1
PT Ratio 66000/110
R` 0.213 ohm/kM
X` 0.412 ohm/kM
B` 0.4788 US/kM
Ro` 0.6417 ohm/kM
Xo` 1.1457 ohm/kM
Bo` 0.3894 US/kM
Zone-1 80% Of Protected Line ( Trishuli Line)
Zone-1 Time 0.05 sec
Zone-2 100% Of Protected Line ( Trishuli Line) +
20% Of Shortest Line (Debighat Line)
Zone-2 Time 0.40 sec
Zone-3 100% Of Protected Line ( Trishuli Line) +
100% Of Shortest Line (Debighat Line)
Zone-3 Time 1 sec
Line Protection Relay (P3L30)-Main Protection Relay
RELAY TEST REPORT
Nomenclature Line Protection Relay Settings:

Relay Type P3L30-CGGGG-AAFNA- CT rated primary current(HV Side) 300A
BBAAA
Sr.N. EB200320022 CT rated secondary current 1A
Make Schneider Electric
Aux. Volts 110VDC
Nominal Current 5A Rated primary voltage (L-L) 66kV
Nominal Voltage 110-250VDC Rated secondary voltage 110V
110-240VAC

Protection Functions
Over Current I-Stage:(IDMT)
S.NO. Pick Up Value Applied Current Trip Time with Status

TMS=0.200
CS TMS 2x Iset 4x Iset 2x Iset 4x Iset
1 0.87A 0.200 1.745A 3.382A 2.051Sec 1.02 Sec OK
Over Current II-Stage:(INSTANTANEOUS)
S.NO. CS Applied Current Operational Delay Trip Time Status

(DMT)
1 4A 4.1A 0.2 Sec 0.209 Sec OK
Earth Fault
S.NO. CS Applied Current Operational Trip Time Status

Delay
TMS=0.2
1 0.157A 0.315A 0.2 2.0045Sec OK

Bus Differential

Delay
1 0.10A 0.11A 0.50 0.504Sec OK
Cable Differential

Delay
1 0.10A 0.11A 0.50 Sec 0.503 Sec OK
Over Voltage – 1st Stage
S.NO. Voltage Setting Applied Voltage Operational Delay Trip Time Status
1 110% 70V 5.00 Sec 5.006 Sec OK
Over Voltage – 2nd Stage
S.NO. Voltage Setting Applied Voltage Operational Delay Trip Time Status
1 125% 78V 0.10 Sec 0.1031 OK

Sec

Zone-1
Phase Setting Applied Setting Operational Delay Trip Time Status
R-Y X=5.247(ohm) 0.05 Sec 0.0593 OK

Sec
R=2.058(ohm)
Y-B X=5.479(ohm) 0.0625 OK
X=5.78(ohm) R=2.145(ohm)
B-R R=2.95(ohm) X=4.551(ohm) 0.0645 OK
R=1.681(ohm)
RYB X=5.16(ohm) 0.0573 OK
R=2.609(ohm)

Zone-2
R-Y X=7.16(ohm) 0.40 Sec 0.4109 OK

Sec
R=2.725(ohm)
Y-B X=7.131(ohm) 0.4087 OK
X=7.41(ohm) R=2.725(ohm)
B-R R=3.78(ohm) X=7.247(ohm) 0.4107 OK
R=2.754(ohm)
RYB X=7.102(ohm) 0.4107 OK
R=3.275(ohm)

Zone-3
R-Y X=7.943(ohm) 1 Sec 1.0149 OK

Sec
R=3.044(ohm)
Y-B X=7.943(ohm) 1.0149 OK
X=8.16(ohm) R=3.073(ohm)
B-R R=4.16(ohm) X=7.943(ohm) 1.0157 OK
R=3.102(ohm)
RYB X=7.885(ohm) 1.0151 OK
R=3.71(ohm)

Line Protection Relay (REL 670)-Main 2 Protection Relay
RELAY TEST REPORT
Nomenclature Line Protection Relay Settings:

Relay Type REL 670 CT rated primary current(HV Side) 300A
Sr.N. IO915003 CT rated secondary current 1A
Make ABB
Aux. Volts 110VDC
Nominal Current 5A Rated primary voltage (L-L) 66kV
Nominal Voltage 110-250VDC Rated secondary voltage 110V
110-240VAC
Protection Functions
Over Current I-Stage:(IDMT)
S.NO. Pick Up Value Applied Current Trip Time with Status

TMS=0.200
CS TMS 2x Iset 4x Iset 2x Iset 4x Iset
1 0.87A 0.200 1.745A 3.382A 2.048Sec 1.09 Sec OK
Over Current II-Stage:(INSTANTANEOUS)
S.NO. CS Applied Current Operational Delay Trip Time Status

(DMT)
1 4A 4.1A 0.2 Sec 0.204 Sec OK

Earth Fault

Delay
TMS=0.2
1 0.157A 0.315A 0.2 2.0039Sec OK
Zone-1
R-Y X=10.544(ohm) 0.05 Sec 0.0594 OK

Sec
R=5.684(ohm)
Y-B X=6.85(ohm) 0.0563 OK

X=11.54(ohm)
R=5.97(ohm)
R=3.979(ohm)
B-R X=4.86(ohm) 0.0591 OK
R=2.842(ohm)

Zone-2
R-Y X=13.955(ohm) 0.40 Sec 0.4104 OK

Sec
R=7.106(ohm)
Y-B X=13.102(ohm) 0.4107 OK

X=14.78(ohm)
R=7.65(ohm)
R=7.106(ohm)
B-R X=13.387(ohm) 0.4106 OK
R=7.39(ohm)

Zone-3
R-Y X=15.66(ohm) 1 Sec 1.0142 OK

Sec
R=8.242(ohm)
Y-B X=15.66(ohm) 1.0148 OK

X=16.27(ohm)
R=8.41(ohm)
R=8.242(ohm)
B-R X=15.66(ohm) 1.0147 OK
R=8.527(ohm)

Multi function Meter
Specification
Nomenclature Multi function Meter

Make Secure Elite 440-446
Aux. Volts 110VDC
Nominal Current 1/5A
Nominal Voltage 110-250VDC
110-240VAC
S.NO. CT Ratio Applied Current Applied Current Injected Status

with
0.5A 1A secondary
injection
kit
1 0.499A 0.99A ISA DRTS OK

33
SL .No MFT Serial Number Remarks
1 X1285294 Found Ok

Energy Meter
Specification
Nomenclature Energy Meter

Make Secure Premier 300
Aux. Volts 110VAC
Nominal Current 1/5A
SL .No EM Serial Number Remarks
1 X1296009 Found Ok
Master Trip Relay
Specification
Nomenclature Master Trip Relay

Make Alstom
Aux. Volts 110 –125 V DC
Nominal Current 25A
Nominal Voltage VX 110-125 VDC
SL .No MT Serial Number Remarks
1 34972229/01/20 (MTR-1) Functional Checked Found Ok
2 34390424/01/20 (MTR-2) Functional Checked Found Ok

Trip Circuit Supervision Relay
Specification
Nomenclature Trip Circuit Supervision Relay

Make Alstom
Aux. Volts 110 –125 V DC
Nominal Voltage VX 110-125 VDC
SL .No TCSR Serial Number Remarks
1 34982117/01/20 Found Ok
2 34982121/01/20 Found Ok
Annunciator
Specification
Nomenclature 24W Annunciator

Make SECO
Aux. Volts 75 –275 V AC/DC
SL .No ANN Serial Number Remarks
1 20-01-4951 Found Ok

Nelumbo Chilime Electrical Engineer Chilime Project Manager
Chilime Consultant


LRMP

Uploaded by

Copyright:

Available Formats

LRMP

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

LRMP

Uploaded by

Copyright:

Available Formats

Site Acceptance Test (SAT)

SITE ACCEPTANCE TEST (SAT)

CUSTOMER : Chilime Jalavidhyut Company Limited

Doc Type Site Acceptance Test report NICPL Doc No NICPL-137-01

Ref Document Reference Description

Digital Multimeter / Fluke 46311178WS

Health and Safety

Doc Type Site Acceptance Test report NICPL Doc No NICPL-137-01

Line Protection Relay (P3L30)-Main Protection Relay

RELAY TEST REPORT

Nomenclature Line Protection Relay Settings:

Doc Type Site Acceptance Test report NICPL Doc No NICPL-137-01

Over Current I-Stage:(IDMT)

S.NO. Pick Up Value Applied Current Trip Time with Status

CS TMS 2x Iset 4x Iset 2x Iset 4x Iset

1 0.87A 0.200 1.745A 3.382A 2.051Sec 1.02 Sec OK

Over Current II-Stage:(INSTANTANEOUS)

S.NO. CS Applied Current Operational Delay Trip Time Status

1 4A 4.1A 0.2 Sec 0.209 Sec OK

S.NO. CS Applied Current Operational Trip Time Status

1 0.157A 0.315A 0.2 2.0045Sec OK

Doc Type Site Acceptance Test report NICPL Doc No NICPL-137-01

S.NO. CS Applied Current Operational Trip Time Status

1 0.10A 0.11A 0.50 0.504Sec OK

S.NO. CS Applied Current Operational Trip Time Status

1 0.10A 0.11A 0.50 Sec 0.503 Sec OK

Over Voltage – 1st Stage

1 110% 70V 5.00 Sec 5.006 Sec OK

Over Voltage – 2nd Stage

1 125% 78V 0.10 Sec 0.1031 OK

Doc Type Site Acceptance Test report NICPL Doc No NICPL-137-01

Phase Setting Applied Setting Operational Delay Trip Time Status

R-Y X=5.247(ohm) 0.05 Sec 0.0593 OK

Y-B X=5.479(ohm) 0.0625 OK

B-R R=2.95(ohm) X=4.551(ohm) 0.0645 OK

RYB X=5.16(ohm) 0.0573 OK

Doc Type Site Acceptance Test report NICPL Doc No NICPL-137-01

Phase Setting Applied Setting Operational Delay Trip Time Status

R-Y X=7.16(ohm) 0.40 Sec 0.4109 OK

Y-B X=7.131(ohm) 0.4087 OK

B-R R=3.78(ohm) X=7.247(ohm) 0.4107 OK

RYB X=7.102(ohm) 0.4107 OK

Doc Type Site Acceptance Test report NICPL Doc No NICPL-137-01

Phase Setting Applied Setting Operational Delay Trip Time Status

R-Y X=7.943(ohm) 1 Sec 1.0149 OK

Y-B X=7.943(ohm) 1.0149 OK

B-R R=4.16(ohm) X=7.943(ohm) 1.0157 OK

RYB X=7.885(ohm) 1.0151 OK

Doc Type Site Acceptance Test report NICPL Doc No NICPL-137-01

Line Protection Relay (REL 670)-Main 2 Protection Relay

RELAY TEST REPORT

Nomenclature Line Protection Relay Settings:

Over Current I-Stage:(IDMT)

S.NO. Pick Up Value Applied Current Trip Time with Status

CS TMS 2x Iset 4x Iset 2x Iset 4x Iset

1 0.87A 0.200 1.745A 3.382A 2.048Sec 1.09 Sec OK

Over Current II-Stage:(INSTANTANEOUS)

S.NO. CS Applied Current Operational Delay Trip Time Status

1 4A 4.1A 0.2 Sec 0.204 Sec OK

Doc Type Site Acceptance Test report NICPL Doc No NICPL-137-01