3/23/2017

Introducing the
15th Edition
Steel Construction Manual
PDH CODE: 71841

Committee on Manuals
Mission
Update and maintain AISC manuals and accompanying design
examples in response to revisions in AISC standards and
inquiries from within the Committee and the steel construction
industry

Roster
28 Members (fabricators, connection designers, detailers,
educators, consulting engrs.)
5 Emeritus Members

1
 3/23/2017

Steel Solutions Center

solutions@aisc.org

or

866.ASK.AISC (866.275.2472)

Table of Contents

Part 1. Dimensions and Properties

Part 2. General Design Considerations
Part 3. Design of Flexural Members
Part 4. Design of Compression Members
Part 5. Design of Tension Members
Part 6. Design of Members Subject to Combined Forces

2
 3/23/2017

Table of Contents (continued)

Part 7. Design Considerations for Bolts
Part 8. Design Considerations for Welds
Part 9. Design of Connecting Elements
Part 10. Design of Simple Shear Connections
Part 11. Design of Partially Restrained Moment Connections
Part 12. Design of Fully Restrained Moment Connections
Part 13. Design of Bracing Connections and Truss Connections
Part 14. Design of Beam Bearing Plates, Column Base Plates, Anchor
Rods and Column Splices
Part 15. Design of Hanger Connections, Bracket Plates, and Crane-
Rail Connections

Table of Contents (continued)

Part 16. Standards
2016 AISC Specification for Structural Steel Buildings
2014 RCSC Specification for Structural Joints Using
High-Strength Bolts
2016 AISC Code of Standard Practice for Steel
Buildings & Bridges

Part 17. Misc. Data and Mathematical Information

3
 3/23/2017

Part 1. Dimensions and Properties

New shapes:
W-shapes (& corresponding WT-shapes)
HP-shape
Angles
HSS
Pipe

Part 1. Dimensions and Properties

W-Shapes HP-Shapes Angles

W40x655 HP12x89 L12x12x1-3/8
W36x925 L12x12x1-1/4
W36x853 L12x12x1-1/8
W36x802 L12x12x1
W36x723 L10x10x1-3/8
W21x275 L10x10x1-1/4
W21x248 L10x10x1-1/8
W21x223 L10x10x1
W14x873 L10x10x7/8
W14x808 L10x10x3/4
& corresponding WT-shapes & corresponding 2Ls

4
 3/23/2017

Part 1. Dimensions and Properties

HSS22x22x7/8, 3/4 HSS24x12x3/4, 5/8, 1/2

HSS20x20x7/8, 3/4, 5/8, 1/2 HSS20x12x3/4
HSS18x18x7/8, 3/4, 5/8, 1/2 HSS16x12x3/4
HSS16x16x7/8, 3/4
HSS14x14x7/8, 3/4
HSS16x16x7/8, 3/4
HSS14x14x7/8, 3/4
HSS12x12x3/4
HSS10x10x3/4

Pipe 26, 24, 20, 18, 16, 14 (std and x-strong)

& Pipe 12, 10 (xx-strong)

Part 1. Dimensions and Properties

New shapes
Updated fillet radii kdet, k1, T affected

5
 3/23/2017

Part 1. Dimensions and Properties

New shapes
Updated fillet radii
Check material availability: See www.aisc.org
V15.0 Database

Part 2. General Design Considerations

Table 2-4: Applicable ASTM Specifications for Various
Structural Shapes
Table 2-5: Applicable ASTM Specifications for Plate
Table 2-7: Summary of Surface Preparation Standards

6
 3/23/2017

Part 2. General Design Considerations

Part 2. General Design Considerations

7
 3/23/2017

Part 3. Design of Flexural Members

Footnote for noncompact sections:
tabulated values have been adjusted accordingly
(also in Part 4 column tables)

Part 3. Design of Flexural Members

Footnote for noncompact or slender sections:
tabulated values have been adjusted accordingly
Table 3-19, Composite beam table footnote:
Ductility (slip capacity) of shear connection at the
beam/concrete interface may control minimum Qn
value per AISC Spec. Sect. I3.2d.

8
 3/23/2017

Part 4. Design of Compression Members

Eliminated K factor in tables/discussion Lc
Clarifies Cw = 0 is used in WT column tables
Chapter E revisions reflected in tables
- Slender members
- Double angles use more general Fcry equation
Removed Tables 4-13 to 4-20: Composite Columns
W-shape column tables: added 65 and 70 ksi for some

Part 4. Design of Compression Members

W-shape column tables: added 65 and 70 ksi for some

9
 3/23/2017

Part 6. Design of Members Subject to Combined Forces

New Tables 6-1a & 6-1b: Limiting Width-to-Thickness Ratios

Consistent
with Spec.
Tables B4.1a
and B4.1b

Part 6. Design of Members Subject to Combined Forces

New Tables 6-1a & 6-1b: Limiting Width-to-Thickness Ratios
New Table 6-2: Available Strength for Members Subject to
Axial, Shear, Flexural and Combined Forces, W-Shapes

10
 3/23/2017

The Super Table

ExampleTable 6-2
Given: W14x99, ASTM A992, pinned ends (K = 1.0),
Lcx = Lcy = Lb = 14 ft
Check shape for combined loading using LRFD, with
required strengths as follows:
LRFD

Pu = 400 kips
Mux = 250 kip-ft
Muy = 80.0 kip-ft

11
 3/23/2017

Example Table 6-2

Solution:

c Pn 1130 kips
bMnx 642 kip-ft

ExampleTable 6-2
Solution:

bMny 311 kip-ft

12
 3/23/2017

ExampleTable 6-2
Solution:
Pu 400 kips

Pc 1130 kips
0.354
P
Because u 0.2, use Spec. Eq. H1-1a:
Pc
Pr 8 Mrx Mry
1.0
Pc 9 Mcx Mcy
400 kips 8 250 kip-ft 80.0 kip-ft
0.928 1.0 o.k.
1130 kips 9 642 kip-ft 311 kip-ft

Part 6. Design of Members Subject to Combined Forces

New Tables 6-1a & 6-1b: Limiting Width-to-Thickness Ratios
New Table 6-2: Available Strength for Members Subject to Axial,
Shear, Flexural and Combined Forces, W-Shapes
Tables 6-3, 6-4 and 6-5: Cross-Section Strength Eqns &
Properties for Encased W-Shapes, Filled Rectangular HSS,
Filled Round HSS

See L.F. Geschwindner, Eng. Journal, 2010 &

M. Denavit et al., Eng. Journal, 2015

13
 3/23/2017

Part 7. Design Considerations for Bolts

Tables 7-14 includes tension-control bolts

Part 8. Design Considerations for Welds

ECCENTRICALLY LOADED WELD GROUPS
Eccentricity in the Plane of the Faying Surface
N

V M
P

1) Instantaneous Center of Rotation Method

2) Elastic Method
3) Plastic Method - new

14
 3/23/2017

Part 8. Design Considerations for Welds

ECCENTRICALLY LOADED WELD GROUPS
Eccentricity in the Plane of the Faying Surface
Plastic Method:
V
fv (8-12)
lw
N
fa (8-13)
lw
++ = 4M
fb 2 (8-14)
lw
fw fv2 fa fb
2
(8-15)

Part 9. Design of Connecting Elements

Connecting elements subject to combined loading

2010: fe fx2 fx fy fy2 3fxy

2
Fy (9-1)

2 4
Mr Pr Vr
1.0 (9-1)
2016: Mc Pc Vc

Dowswell, Engineering Journal, No. 1, 2015;

Neal, Journal of Applied Mechanics, 1961;
Astaneh, Steel Tips, 1998

15
 3/23/2017

Part 9. Design of Connecting Elements

Connecting elements subject to combined loading
Coped beam strength
No limits on cope length or cope depth
Post-yield strength explicitly accounted for

Coped flexural local buckling strength

top flange only coped (bMn, Mn/b)

When p
where ho
Mn M p Fy Znet (9-6)
tw
When p 2 p k1E
p 0.475
Fy

Mn M p (M p M y ) 1 (9-7)
k1 fk 1.61
p
When 2 p 0.903Ek1
Fcr
2
Mn Fcr Snet (9-8)

16
 3/23/2017

Part 9. Design of Connecting Elements

Coped beam strengthtop & bottom flange

Use Spec. Section F11

= ct
When cb ct :
L d
Cb 3 ln b 1 ct 1.84 (9-15)
d d
ct cb

2
When ct cb :
c L d
Cb b 3 ln b 1 ct 1.84 (9-16)
ct d d

Dowswell & Whyte, Engineering Journal, No. 1, 2014

Part 9. Design of Connecting Elements

Connecting elements subject to combined loading
Coped beam strength
Other Spec. requirements and design considerations
- Prying action
- Plate elements subjected to out-of-plane bending

17
 3/23/2017

Part 9. Design of Connecting Elements

- Prying action 14th Ed: max 45
15th Ed: max 60

Prying forces in tee Typical bolt location Edge bolt

- Prying action
LRFD ASD

4Tu b 4Ta b
tmin (9-19a) tmin (9-19b)
pFu 1 pFu 1

d
1
p
1
1.0 if 1 or lesser of 1 and if <1
1
1 Bc
1
Tr
b

a
Bc available tension per bolt based on
tension only or combined tension & shear rupture

18
 3/23/2017

Part 9. Design of Connecting Elements

- Plate elements subjected to out-of-plane loads
Also see Spec. Sect. J10.10.

Transverse load In-plane moment Out-of-plane moment

Yield-Line Analysis Models

Part 10. Design of Simple Shear Connections

14th Edition Manual
Bolt and Angle Limit States:

Minimum of:
Total bolt shear on bolt group
Total slip resistance for slip-
critical bolts on bolt group
Bolt bearing on the angles
Bolt tearout on the angles
Shear yielding of the angles
Shear rupture of the angles
Block shear rupture of the
angles

19
 3/23/2017

Part 10. Design of Simple Shear Connections

15th Ed. Manual
Bolt and Angle Limit States:
Minimum of:
(Effective strengths of
individual bolts)
where
Effective strength =
MIN: bolt shear, slip
resistance for slip-
critical bolts, bolt
bearing, bolt tearout
Shear yielding -- angles
Shear rupture -- angles
Block shear rupture -- angles

Part 10. Design of Simple Shear Connections

14th Edition Manual

Beam Web Limit States (kip/in.):

Bolt bearing on the web
Bolt tearout on the web
Shear yielding of the web
Shear rupture of the web
Block shear rupture of the web

20
 3/23/2017

14th Ed. 15TH Ed.

Part 10. Design of Simple Shear Connections

Table 10-1 revised
Extended single-plate connections: Removed stabilizer
plate provision

Thornton and Fortney, Engineering Journal, 2011, 2016

21
 3/23/2017

Part 14. Design of Beam Bearing Plates, Column Base

Plates, Anchor Rods and Column Splices 14th Ed:
3 1/2
4

14th Ed:
3

14th Ed:
1 13/16
2 1/16
14th Ed:
2 5/16
2 3/4

Part 14. Design of Beam Bearing Plates, Column Base

Plates, Anchor Rods and Column Splices
Notes:
1. Hole sizes provided are based on anchor rod size and
correlate with ACI 117 (ACI, 2010).

4. ASTM F844 washer are permitted instead of plate washers
when hole clearances are limited to 5/16 in. for rod diameters up
to 1 in., 1/2 in. for rod diameters over 1 in. to 2 in., and 1 in. for
rod diameters over 2 in. This exception should not be used
unless the general contractor has agreed to meet smaller
tolerances for anchor rod placement than those permitted in ACI
117.

22
 3/23/2017

In Summary
Part 1New shape sizes and detailing dimensions
Part 2ASTM A500 Grade C is preferred for HSS
Part 3New footnotes
Part 4W-Shape column tables for 65 and 70 ksi
Part 6New Super Table 6-2
Part 7Table 7-14 includes TC bolts dimensions
Part 8New plastic method for ecc. loaded bolt grps
Part 9Increased permitted tributary length for prying
Part 10Removal of stabilizer plate provisions
Part 14Updated Table 14-2 for improved anchor-rod
installation

aisc.org/manualresources

23
 3/23/2017

Design Examples V15.0

Part IV: Additional Resources

Combined Flexure and Axial Force, W-shapes (Table 6-1, 14th

Ed. Manual)
Filled HSS Column Tables, A500 Gr. C (Tables 4-13 to 4-20,
14th Ed. Manual)
New Super Table: W-Shapes, 65 and 70 ksi
HSS, ASTM A1085
HSS, A500 Gr. C
Pipe
New Znet Table for Coped W-shapes

Available Summer 2017

SEMINARS@AISC.ORG

24
 3/23/2017

Thank you!
PDH CODE: 71841

25