Intel Pentium Dual-Core Mobile Processor

Intel Pentium Dual-Core Mobile
Processor
Datasheet
July 2007
Revision 003
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR
OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS
OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING
TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE,
MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS OTHERWISE AGREED IN WRITING BY INTEL, THE INTEL PRODUCTS ARE NOT DESIGNED NOR INTENDED FOR ANY APPLICATION IN WHICH THE
FAILURE OF THE INTEL PRODUCT COULD CREATE A SITUATION WHERE PERSONAL INJURY OR DEATH MAY OCCUR.
Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the absence or characteristics
of any features or instructions marked "reserved" or "undefined." Intel reserves these for future definition and shall have no responsibility whatsoever
for conflicts or incompatibilities arising from future changes to them. The information here is subject to change without notice. Do not finalize a design
with this information.
The products described in this document may contain design defects or errors known as errata which may cause the product to deviate from published
specifications. Current characterized errata are available on request.
Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.
Intel Virtualization Technology requires a computer system with a processor, chipset, BIOS, virtual machine monitor (VMM) and applications enabled
for VT. Functionality, performance or other VT benefit will vary depending on hardware and software configurations. VT-enabled BIOS and VMM
applications are currently in development.
Intel, Pentium, Intel Core, Intel SpeedStep, MMX and the Intel logo are registered trademarks or trademarks of Intel Corporation in the U.S. and other
countries.
*Other names and brands may be claimed as the property of others.
Copyright 2007, Intel Corporation. All rights reserved.
2 Datasheet
Contents
1 Introduction .............................................................................................................. 7
1.1 Terminology ....................................................................................................... 7
1.2 References ......................................................................................................... 8
2 Low Power Features .................................................................................................. 9
2.1 Clock Control and Low Power States ...................................................................... 9
2.1.1 Core Low-Power States ........................................................................... 11
2.1.2 Package Low Power States ...................................................................... 12
2.2 Enhanced Intel SpeedStep Technology .............................................................. 13
2.3 FSB Low Power Enhancements ............................................................................ 14
2.4 Processor Power Status Indicator (PSI#) Signal..................................................... 15
3 Electrical Specifications ........................................................................................... 17
3.1 Power and Ground Pins ...................................................................................... 17
3.2 FSB Clock (BCLK[1:0]) and Processor Clocking ...................................................... 17
3.3 Voltage Identification ......................................................................................... 17
3.4 Catastrophic Thermal Protection .......................................................................... 20
3.5 Signal Terminations and Unused Pins ................................................................... 21
3.6 FSB Frequency Select Signals (BSEL[2:0])............................................................ 21
3.7 FSB Signal Groups............................................................................................. 21
3.8 CMOS Signals ................................................................................................... 23
3.9 Maximum Ratings.............................................................................................. 23
3.10 Processor DC Specifications ................................................................................ 24
4 Package Mechanical Specifications and Pin Information .......................................... 29
4.1 Package Mechanical Specifications ....................................................................... 29
4.2 Processor Pinout and Pin List .............................................................................. 32
4.3 Alphabetical Signals Reference ............................................................................ 55
5 Thermal Specifications and Design Considerations .................................................. 63
5.1 Monitoring Processor Temperature....................................................................... 64
5.1.1 Thermal Diode ....................................................................................... 64
5.1.2 Thermal Diode Offset .............................................................................. 66
5.1.3 Intel Thermal Monitor........................................................................... 67
5.1.4 Digital Thermal Sensor............................................................................ 68
5.1.5 Out of Specification Detection .................................................................. 69
Figures
1 Package-Level Low Power States................................................................................ 10
2 Core Low Power States ............................................................................................. 10
3 Active VCC and ICC Loadline for the Processor ............................................................. 26
4 Micro-FCPGA Processor Package Drawing Sheet 1 of 2 .................................................. 30
5 Micro-FCPGA Processor Package Drawing Sheet 2 of 2 .................................................. 31
Datasheet 3
Tables
1 References ............................................................................................................... 8
2 Coordination of Core-Level Low Power States at the Package Level .................................. 9
3 Voltage Identification Definition ..................................................................................17
4 BSEL[2:0] Encoding for BCLK Frequency......................................................................21
5 FSB Pin Groups ........................................................................................................22
6 Processor DC Absolute Maximum Ratings.....................................................................23
7 Voltage and Current Specifications for Standard Voltage Processor ..................................24
8 FSB Differential BCLK Specifications ............................................................................27
9 AGTL+ Signal Group DC Specifications ........................................................................27
10 CMOS Signal Group DC Specifications..........................................................................28
11 Open Drain Signal Group DC Specifications ..................................................................28
12 Processor Pin Coordinates from Top of the Package (Sheet 1 of 2) ..................................32
13 Processor Pin Coordinates from Top of the Package (Sheet 2 of 2) ..................................33
14 Pin Listing by Pin Name .............................................................................................35
15 Pin Listing by Pin Number ..........................................................................................46
16 Signal Description.....................................................................................................55
17 Power Specifications .................................................................................................63
18 Thermal Diode Interface ............................................................................................64
19 Thermal Diode Parameters using Diode Mode ...............................................................65
20 Thermal Diode Parameters using Transistor Mode .........................................................65
21 Thermal Diode ntrim and Diode Correction Toffset..........................................................66
4 Datasheet
Revision History
Document
Revision Description Date
Number
316519 001 Initial release February 2007

316519 002 Added T2080 SKU March 2007
316519 003 Added T2130 SKU July 2007
Datasheet 5
6 Datasheet
Introduction
1 Introduction
The Intel Pentium dual-core mobile processor is built on Intels 65-nanometer
process technology. This document provides specifications for the Pentium dual-core
mobile processor.
Note: All instances of processor in this document refer to the Pentium dual-core mobile
processor with 1-MB L2 cache and 533-MHz Front Side Bus (FSB), unless specified
otherwise.
The following list provides some of the key features on this processor:
Dual-core processor
Supports Intel Architecture with Dynamic Execution
On-die, primary 32-KB instruction cache and 32-KB write-back data cache
On-die, 1-MB second level cache with Advanced Transfer Cache Architecture
Data prefetch logic
Streaming SIMD Extensions 2 (SSE2) and Streaming SIMD Extensions 3 (SSE3)
533-MHz FSB
Enhanced Intel SpeedStep Technology
Digital Thermal Sensor
Processor is offered in only Micro-FCPGA packages
Execute Disable Bit support for enhanced security
1.1 Terminology
Term Definition
A # symbol after a signal name refers to an active low signal, indicating a

signal is in the active state when driven to a low level. For example, when
RESET# is low, a reset has been requested. Conversely, when NMI is high,
a nonmaskable interrupt has occurred. In the case of signals where the
# name does not imply an active state but describes part of a binary
sequence (such as address or data), the # symbol implies that the signal
is inverted. For example, D[3:0] = HLHL refers to a hex A, and D[3:0]#
= LHLH also refers to a hex A (H= High logic level, L= Low logic level).
XXXX means that the specification or value is yet to be determined.
Front Side Bus Refers to the interface between the processor and system core logic (also
(FSB) known as the chipset components).
Advanced Gunning Transceiver Logic. Used to refer to Assisted GTL+
AGTL+
signaling technology on some Intel processors.
Datasheet 7
Introduction
1.2 References
Material and concepts available in the following documents may be beneficial when
reading this document.
Table 1. References
Document
Document
Number
Intel Pentium Dual-Core Processor on 65-nm Technology

316515
Specification Update
Mobile Intel 945 Express Chipset Family Datasheet 309219
Mobile Intel 945 Express Chipset Family Specification Update 309220
Intel I/O Controller Hub 7 (ICH7) Family Datasheet 307013
Intel I/O Controller Hub 7 (ICH7) Family Specification Update 307014
http://
www.intel.com/
Intel 64 and IA-32 Architectures Software Developer's Manuals
products/processor/
manuals/index.htm
Volume 1 Basic Architecture 253665
Volume 2A: Instruction Set Reference (A-M) 253666
Volume 2B: Instruction Set Reference (N-Z) 253667
Volume 3A: System Programming Guide 253668
Volume 3B: System Programming Guide 253669
AP-485, Intel Processor Identification and CPUID Instruction Application
241618
Note
8 Datasheet
Low Power Features
2 Low Power Features

2.1 Clock Control and Low Power States
The processor supports low power states at the core level and the package level. A core
may independently enter the C1/AutoHALT, C1/MWAIT, C2 and C3 low power states.
Package low power states include Normal, Stop Grant, Stop Grant Snoop, Sleep and
Deep Sleep. When both cores are in a common core, low-power state the central power
management logic ensures the entire processor enters the respective package low
power state by initiating a P_LVLx (P_LVL2 and P_LVL3) I/O read to the chipset.
The processor implements two software interfaces for requesting low power states,
MWAIT instruction extensions with sub-state hints and P_LVLx reads to the ACPI P_BLK
register block mapped in the processors I/O address space. The P_LVLx I/O reads are
converted to equivalent MWAIT C-state requests inside the processor and do not
directly result in I/O reads on the processor FSB. The monitor address does not need to
be setup before using the P_LVLx I/O read interface. The sub-state hints used for each
P_LVLx read can be configured in a software programmable MSR. If a core encounters a
chipset break event while STPCLK# is asserted, then it asserts the PBE# output signal.
Assertion of PBE# when STPCLK# is asserted indicates to system logic that individual
cores should return to the C0 state and the processor should return to the Normal
state.
Figure 1 shows the package low-power states Figure 2 shows the core low-power
states. Table 2 provides a mapping of core, low-power states to package low power
states.
Table 2. Coordination of Core-Level Low Power States at the Package Level
Dual Core: Core1 State

Resolved Single
Package State Core:
C0 C11 C2 C3
C0 Normal Normal Normal Normal Normal

Core0 / Functional
C11 Normal Normal Normal Normal Normal

Core State
C2 Stop Grant Normal Normal Stop Grant Stop Grant
C3 Deep Sleep Normal Normal Stop Grant Deep Sleep
NOTES:
1. AutoHALT or MWAIT/C1.
Datasheet 9
Low Power Features
Figure 1. Package-Level Low Power States
STPCLK# asserted SLP# asserted DPSLP# asserted

Stop Deep
Normal Sleep
Grant Sleep
STPCLK# de-asserted SLP# de-asserted DPSLP# de-asserted
Snoop Snoop
serviced occurs
Stop
Grant
Snoop
Figure 2. Core Low Power States
Stop
Grant
STPCLK# STPCLK#
asserted de-asserted
STPCLK# STPCLK#
de-asserted asserted
STPCLK#
de-asserted
C1/ STPCLK# C1/Auto
MWAIT asserted Halt
Core state
HLT instruction
break
MWAIT(C1) Halt break
C0
P_LVL2 or
MWAIT(C2)
Core state
break
Core P_LVL3 or
state MWAIT(C3) C2
break

C3
halt break = A20M# transition, INIT#, INTR, NMI, PREQ#, RESET#, SMI#, or APIC interrupt
core state break = (halt break OR Monitor event) AND STPCLK# high (not asserted)
STPCLK# assertion and de-assertion have no effect if a core is in C2 or C3.
10 Datasheet
Low Power Features
2.1.1 Core Low-Power States

2.1.1.1 C0 State
This is the normal operating state for both cores of the processor.
2.1.1.2 C1/AutoHALT Powerdown State

C1/AutoHALT is a low power state entered when the processor core executes the HALT
instruction. The processor core will transition to the C0 state upon the occurrence of
SMI#, INIT#, LINT[1:0] (NMI, INTR), or FSB interrupt message. RESET# will cause the
processor to immediately initialize itself.
A System Management Interrupt (SMI) handler will return execution to either Normal
state or the AutoHALT Powerdown state. See the Intel Architecture Software
Developer's Manual, Volume 3A/3B: System Programming Guide for more information.
The system can generate a STPCLK# while the processor is in the AutoHALT
Powerdown state. When the system deasserts the STPCLK# interrupt, the processor
will return execution to the HALT state.
While in AutoHALT Powerdown state, the Intel Pentium Dual-Core processor will
process bus snoops and snoops from the other core.The processor core will enter a
snoopable sub-state (not shown in Figure 2) to process the snoop and then return to
the AutoHALT Powerdown state.
2.1.1.3 C1/MWAIT Powerdown State

MWAIT is a low power state entered when the processor core executes the MWAIT
instruction. Processor behavior in the MWAIT state is identical to the AutoHALT state
except that there is an additional event that can cause the processor core to return to
the C0 state: the Monitor event. See the Intel Architecture Software Developer's
Manual, Volume 2A/2B: Instruction Set Reference for more information.
2.1.1.4 Core C2 State

Individual cores of the processor can enter the C2 state by initiating a P_LVL2 I/O read
to the P_BLK or an MWAIT(C2) instruction, but the processor will not issue a Stop Grant
Acknowledge special bus cycle unless the STPCLK# pin is also asserted.
While in C2 state, the processor will process bus snoops and snoops from the other
core. The processor core will enter a snoopable sub-state (not shown in Figure 2) to
process the snoop and then return to the C2 state.
2.1.1.5 Core C3 State

Core C3 state is a very low power state the processor core can enter while maintaining
context. Individual cores of the Intel Pentium Dual-Core processor can enter the C3
state by initiating a P_LVL3 I/O read to the P_BLK or an MWAIT(C3) instruction. Before
entering the C3 state, the processor core flushes the contents of its L1 caches into the
processors L2 cache. Except for the caches, the processor core maintains all its
architectural state in the C3 state. The Monitor remains armed if it is configured. All of
the clocks in the processor core are stopped in the C3 state.
Because the cores caches are flushed the processor keeps the core in the C3 state
when the processor detects a snoop on the FSB or when the other core of the processor
accesses cacheable memory. The processor core will transition to the C0 state upon the
occurrence of a Monitor event, SMI#, INIT#, LINT[1:0] (NMI, INTR), or FSB interrupt
message. RESET# will cause the processor core to immediately initialize itself.
Datasheet 11
Low Power Features
2.1.2 Package Low Power States

All package level low power states are described as follows:
2.1.2.1 Normal State

This is the normal operating state for the processor. The processor enters the Normal
state when at least one of its cores is in the C0, C1/AutoHALT, or C1/MWAIT state.
2.1.2.2 Stop-Grant State

When the STPCLK# pin is asserted each core of the Intel Pentium Dual-Core processor
enters the Stop-Grant state within 20 bus clocks after the response phase of the
processor-issued Stop Grant Acknowledge special bus cycle. Processor cores that are
already in the C2, or C3 state remain in their current low-power state. When the
STPCLK# pin is deasserted, each core returns to its previous core low power state.
Since the AGTL+ signal pins receive power from the FSB, these pins should not be
driven (allowing the level to return to VCCP) for minimum power drawn by the
termination resistors in this state. In addition, all other input pins on the FSB should be
driven to the inactive state.
RESET# will cause the processor to immediately initialize itself, but the processor will
stay in Stop-Grant state. When RESET# is asserted by the system the STPCLK#, SLP#,
and DPSLP# pins must be deasserted more than 450 s prior to RESET# deassertion.
When re-entering the Stop-Grant state from the Sleep state, STPCLK# should be
deasserted ten or more bus clocks after the deassertion of SLP#.
While in Stop-Grant state, the processor will service snoops and latch interrupts
delivered on the FSB. The processor will latch SMI#, INIT# and LINT[1:0] interrupts
and will service only one of each upon return to the Normal state.
The PBE# signal may be driven when the processor is in Stop-Grant state. PBE# will be
asserted if there is any pending interrupt or monitor event latched within the processor.
Pending interrupts that are blocked by the EFLAGS.IF bit being clear will still cause
assertion of PBE#. Assertion of PBE# indicates to system logic that the entire Intel
Pentium Dual-Core processor should return to the Normal state.
A transition to the Stop Grant Snoop state will occur when the processor detects a
snoop on the FSB (see Section 2.1.2.3). A transition to the Sleep state (see
Section 2.1.2.4) will occur with the assertion of the SLP# signal.
2.1.2.3 Stop Grant Snoop State

The processor will respond to snoop or interrupt transactions on the FSB while in Stop-
Grant state by entering the Stop-Grant Snoop state. The processor will stay in this
state until the snoop on the FSB has been serviced (whether by the processor or
another agent on the FSB) or the interrupt has been latched. The processor will return
to the Stop-Grant state once the snoop has been serviced or the interrupt has been
latched.
2.1.2.4 Sleep State

The Sleep state is a low power state in which the processor maintains its context,
maintains the phase-locked loop (PLL), and stops all internal clocks. The Sleep state is
entered through assertion of the SLP# signal while in the Stop-Grant state. The SLP#
pin should only be asserted when the processor is in the Stop-Grant state. SLP#
assertions while the processor is not in the Stop-Grant state is out of specification and
may result in unapproved operation.
12 Datasheet
Low Power Features
In the Sleep state, the processor is incapable of responding to snoop transactions or

latching interrupt signals. No transitions or assertions of signals (with the exception of
SLP#, DPSLP# or RESET#) are allowed on the FSB while the processor is in Sleep
state. Snoop events that occur while in Sleep state or during a transition into or out of
Sleep state will cause unpredictable behavior. Any transition on an input signal before
the processor has returned to the Stop-Grant state will result in unpredictable behavior.
If RESET# is driven active while the processor is in the Sleep state, and held active as
specified in the RESET# pin specification, then the processor will reset itself, ignoring
the transition through Stop-Grant State. If RESET# is driven active while the processor
is in the Sleep State, the SLP# and STPCLK# signals should be deasserted immediately
after RESET# is asserted to ensure the processor correctly executes the Reset
sequence.
While in the Sleep state, the processor is capable of entering an even lower power
state, the Deep Sleep state, by asserting the DPSLP# pin. (See Section 2.1.2.5.) While
the processor is in the Sleep state, the SLP# pin must be deasserted if another
asynchronous FSB event needs to occur.
2.1.2.5 Deep Sleep State

Deep Sleep state is a very low power state the processor can enter while maintaining
context. Deep Sleep state is entered by asserting the DPSLP# pin while in the Sleep
state. BCLK may be stopped during the Deep Sleep state for additional platform level
power savings. BCLK stop/restart timings on appropriate chipset based platforms with
the CK410M clock chip are as follows:
Deep Sleep entry: the system clock chip may stop/tristate BCLK within 2 BCLKs of
DPSLP# assertion. It is permissible to leave BCLK running during Deep Sleep.
Deep Sleep exit: the system clock chip must drive BCLK to differential DC levels
within 2-3 ns of DPSLP# deassertion and start toggling BCLK within 10 BCLK
periods.
To re-enter the Sleep state, the DPSLP# pin must be deasserted. BCLK can be re-
started after DPSLP# deassertion as described above. A period of 15 microseconds (to
allow for PLL stabilization) must occur before the processor can be considered to be in
the Sleep state. Once in the Sleep state, the SLP# pin must be deasserted to re-enter
the Stop-Grant state.
While in Deep Sleep state, the processor is incapable of responding to snoop

transactions or latching interrupt signals. No transitions of signals are allowed on the
FSB while the processor is in Deep Sleep state. When the processor is in Deep Sleep
state, it will not respond to interrupts or snoop transactions. Any transition on an input
signal before the processor has returned to Stop-Grant state will result in unpredictable
behavior.
2.2 Enhanced Intel SpeedStep Technology

The Intel Pentium Dual-Core processors feature Enhanced Intel SpeedStep Technology.
Following are the key features of Enhanced Intel SpeedStep technology:
Multiple voltage/frequency operating points provide optimal performance at the
lowest power.
Voltage/Frequency selection is software controlled by writing to processor MSRs
(Model Specific Registers).
If the target frequency is higher than the current frequency, VCC is ramped up
in steps by placing new values on the VID pins and the PLL then locks to the
new frequency.
Datasheet 13
Low Power Features
If the target frequency is lower than the current frequency, the PLL locks to the
new frequency and the VCC is changed through the VID pin mechanism.
Software transitions are accepted at any time. If a previous transition is in
progress, the new transition is deferred until the previous transition completes.
The processor controls voltage ramp rates internally to ensure glitch free
transitions.
Low transition latency and large number of transitions possible per second.
Processor core (including L2 cache) is unavailable for up to 10 s during the
frequency transition.
The bus protocol (BNR# mechanism) is used to block snooping.
Improved Intel Thermal Monitor mode.
When the on-die thermal sensor indicates that the die temperature is too high,
the processor can automatically perform a transition to a lower frequency/
voltage specified in a software programmable MSR.
The processor waits for a fixed time period. If the die temperature is down to
acceptable levels, an up transition to the previous frequency/voltage point
occurs.
An interrupt is generated for the up and down Intel Thermal Monitor transitions
enabling better system level thermal management.
Enhanced thermal management features.
Digital thermal sensor and thermal interrupts with Out of Specification
detection and interrupt generation.
TM1 in addition to TM2 in case of non successful TM2 transition.
Dual-core thermal management synchronization.
Each core in the processor implements an independent MSR for controlling Enhanced
Intel SpeedStep Technology, but both cores must operate at the same frequency and
voltage. The processor has performance state coordination logic to resolve frequency
and voltage requests from the two cores into a single frequency and voltage request for
the package as a whole. If both cores request the same frequency and voltage then the
processor will transition to the requested common frequency and voltage. If the two
cores have different frequency and voltage requests then the processor will take the
highest of the two frequencies and voltages as the resolved request and transition to
that frequency and voltage.
2.3 FSB Low Power Enhancements

The Intel Pentium Dual-Core processors incorporate FSB low power enhancements:
Dynamic FSB Power Down
BPRI# control for address and control input buffers
Dynamic Bus Parking
Dynamic On Die Termination disabling
Low VCCP (I/O termination voltage)
The processor incorporates the DPWR# signal that controls the data bus input buffers
on the processor. The DPWR# signal disables the buffers when not used and activates
them only when data bus activity occurs, resulting in significant power savings with no
performance impact. BPRI# control also allows the processor address and control input
buffers to be turned off when the BPRI# signal is inactive. Dynamic Bus Parking allows
a reciprocal power reduction in chipset address and control input buffers when the
14 Datasheet
Low Power Features
processor deasserts its BR0# pin. The On Die Termination on the processor FSB buffers
is disabled when the signals are driven low, resulting in additional power savings. The
low I/O termination voltage is on a dedicated voltage plane independent of the core
voltage, enabling low I/O switching power at all times.
2.4 Processor Power Status Indicator (PSI#) Signal

The processor incorporates the PSI# signal that is asserted when the processor is in a
reduced power consumption state. PSI# can be used to improve intermediate and light
load efficiency of the voltage regulator, resulting in platform power savings and
extended battery life. The algorithm that the processor uses for determining when to
assert PSI# is different from the algorithm used in previous Intel Pentium M
processors.
Datasheet 15
Low Power Features
16 Datasheet
Electrical Specifications
3 Electrical Specifications
3.1 Power and Ground Pins
For clean, on-chip power distribution, the processor will have a large number of VCC
(power) and VSS(ground) inputs. All power pins must be connected to VCC power planes
while all VSS pins must be connected to system ground planes. Use of multiple power
and ground planes is recommended to reduce I*R drop. Please contact your Intel
representative for more details. The processor VCC pins must be supplied the voltage
determined by the VID (Voltage ID) pins.
3.2 FSB Clock (BCLK[1:0]) and Processor Clocking

BCLK[1:0] directly controls the FSB interface speed as well as the core frequency of the
processor. As in previous generation processors, the processors core frequency is a
multiple of the BCLK[1:0] frequency. The processor uses a differential clocking
implementation.
3.3 Voltage Identification

The processor uses seven voltage identification pins, VID[6:0], to support automatic
selection of power supply voltages. The VID pins for the processor are CMOS outputs
driven by the processor VID circuitry. Table 3 specifies the voltage level corresponding
to the state of VID[6:0]. A 1 in this refers to a high-voltage level and a 0 refers to low-
voltage level.
Table 3. Voltage Identification Definition (Sheet 1 of 4)
VID6 VID5 VID4 VID3 VID2 VID1 VID0 VCC (V)
0 0 0 0 0 0 0 1.5000
0 0 0 0 0 0 1 1.4875
0 0 0 0 0 1 0 1.4750
0 0 0 0 0 1 1 1.4625
0 0 0 0 1 0 0 1.4500
0 0 0 0 1 0 1 1.4375
0 0 0 0 1 1 0 1.4250
0 0 0 0 1 1 1 1.4125
0 0 0 1 0 0 0 1.4000
0 0 0 1 0 0 1 1.3875
0 0 0 1 0 1 0 1.3750
0 0 0 1 0 1 1 1.3625
0 0 0 1 1 0 0 1.3500
0 0 0 1 1 0 1 1.3375
0 0 0 1 1 1 0 1.3250
0 0 0 1 1 1 1 1.3125
Datasheet 17
0 0 1 0 0 0 0 1.3000
0 0 1 0 0 0 1 1.2875
0 0 1 0 0 1 0 1.2750
0 0 1 0 0 1 1 1.2625
0 0 1 0 1 0 0 1.2500
0 0 1 0 1 0 1 1.2375
0 0 1 0 1 1 0 1.2250
0 0 1 0 1 1 1 1.2125
0 0 1 1 0 0 0 1.2000
0 0 1 1 0 0 1 1.1875
0 0 1 1 0 1 0 1.1750
0 0 1 1 0 1 1 1.1625
0 0 1 1 1 0 0 1.1500
0 0 1 1 1 0 1 1.1375
0 0 1 1 1 1 0 1.1250
0 0 1 1 1 1 1 1.1125
0 1 0 0 0 0 0 1.1000
0 1 0 0 0 0 1 1.0875
0 1 0 0 0 1 0 1.0750
0 1 0 0 0 1 1 1.0625
0 1 0 0 1 0 0 1.0500
0 1 0 0 1 0 1 1.0375
0 1 0 0 1 1 0 1.0250
0 1 0 0 1 1 1 1.0125
0 1 0 1 0 0 0 1.0000
0 1 0 1 0 0 1 0.9875
0 1 0 1 0 1 0 0.9750
0 1 0 1 0 1 1 0.9625
0 1 0 1 1 0 0 0.9500
0 1 0 1 1 0 1 0.9375
0 1 0 1 1 1 0 0.9250
0 1 0 1 1 1 1 0.9125
0 1 1 0 0 0 0 0.9000
0 1 1 0 0 0 1 0.8875
0 1 1 0 0 1 0 0.8750
0 1 1 0 0 1 1 0.8625
0 1 1 0 1 0 0 0.8500
0 1 1 0 1 0 1 0.8375
18 Datasheet
0 1 1 0 1 1 0 0.8250
0 1 1 0 1 1 1 0.8125
0 1 1 1 0 0 0 0.8000
0 1 1 1 0 0 1 0.7875
0 1 1 1 0 1 0 0.7750
0 1 1 1 0 1 1 0.7625
0 1 1 1 1 0 0 0.7500
0 1 1 1 1 0 1 0.7375
0 1 1 1 1 1 0 0.7250
0 1 1 1 1 1 1 0.7125
1 0 0 0 0 0 0 0.7000
1 0 0 0 0 0 1 0.6875
1 0 0 0 0 1 0 0.6750
1 0 0 0 0 1 1 0.6625
1 0 0 0 1 0 0 0.6500
1 0 0 0 1 0 1 0.6375
1 0 0 0 1 1 0 0.6250
1 0 0 0 1 1 1 0.6125
1 0 0 1 0 0 0 0.6000
1 0 0 1 0 0 1 0.5875
1 0 0 1 0 1 0 0.5750
1 0 0 1 0 1 1 0.5625
1 0 0 1 1 0 0 0.5500
1 0 0 1 1 0 1 0.5375
1 0 0 1 1 1 0 0.5250
1 0 0 1 1 1 1 0.5125
1 0 1 0 0 0 0 0.5000
1 0 1 0 0 0 1 0.4875
1 0 1 0 0 1 0 0.4750
1 0 1 0 0 1 1 0.4625
1 0 1 0 1 0 0 0.4500
1 0 1 0 1 0 1 0.4375
1 0 1 0 1 1 0 0.4250
1 0 1 0 1 1 1 0.4125
1 0 1 1 0 0 0 0.4000
1 0 1 1 0 0 1 0.3875
1 0 1 1 0 1 0 0.3750
1 0 1 1 0 1 1 0.3625
Datasheet 19
1 0 1 1 1 0 0 0.3500
1 0 1 1 1 0 1 0.3375
1 0 1 1 1 1 0 0.3250
1 0 1 1 1 1 1 0.3125
1 1 0 0 0 0 0 0.3000
1 1 0 0 0 0 1 0.2875
1 1 0 0 0 1 0 0.2750
1 1 0 0 0 1 1 0.2625
1 1 0 0 1 0 0 0.2500
1 1 0 0 1 0 1 0.2375
1 1 0 0 1 1 0 0.2250
1 1 0 0 1 1 1 0.2125
1 1 0 1 0 0 0 0.2000
1 1 0 1 0 0 1 0.1875
1 1 0 1 0 1 0 0.1750
1 1 0 1 0 1 1 0.1625
1 1 0 1 1 0 0 0.1500
1 1 0 1 1 0 1 0.1375
1 1 0 1 1 1 0 0.1250
1 1 0 1 1 1 1 0.1125
1 1 1 0 0 0 0 0.1000
1 1 1 0 0 0 1 0.0875
1 1 1 0 0 1 0 0.0750
1 1 1 0 0 1 1 0.0625
1 1 1 0 1 0 0 0.0500
1 1 1 0 1 0 1 0.0375
1 1 1 0 1 1 0 0.0250
1 1 1 0 1 1 1 0.0125
3.4 Catastrophic Thermal Protection

The processor supports the THERMTRIP# signal for catastrophic thermal protection. An
external thermal sensor should also be used to protect the processor and the system
against excessive temperatures. Even with the activation of THERMTRIP#, which halts
all processor internal clocks and activity, leakage current can be high enough such that
the processor cannot be protected in all conditions without the removal of power to the
processor. If the external thermal sensor detects a catastrophic processor temperature
of 125C (maximum), or if the THERMTRIP# signal is asserted, the VCC supply to the
processor must be turned off within 500 ms to prevent permanent silicon damage due
to thermal runaway of the processor.
20 Datasheet
3.5 Signal Terminations and Unused Pins

All RSVD (RESERVED) pins must remain unconnected. Connection of these pins to VCC,
VSS, or to any other signal (including each other) can result in component malfunction
or incompatibility with future processors. See Section 4.2 for a pin listing of the
processor and the location of all RSVD pins.
For reliable operation, always connect unused inputs or bidirectional signals to an

appropriate signal level. Unused active low AGTL+ inputs may be left as no connects if
AGTL+ termination is provided on the processor silicon. Unused active high inputs
should be connected through a resistor to ground (VSS). Unused outputs can be left
unconnected.
The TEST1 pin must have a stuffing option connection to VSS. The TEST2 pin must have
a 51- 5%, pull-down resistor to VSS.
3.6 FSB Frequency Select Signals (BSEL[2:0])

The BSEL[2:0] signals are used to select the frequency of the processor input clock
(BCLK[1:0]). These signals should be connected to the clock chip and the Mobile Intel
945 Express Chipset family on the platform. The BSEL encoding for BCLK[1:0] is shown
in Table 4.
Table 4. BSEL[2:0] Encoding for BCLK Frequency
BSEL[2] BSEL[1] BSEL[0] BCLK Frequency
L L L RESERVED
L L H 133 MHz
L H L RESERVED
L H H RESERVED
3.7 FSB Signal Groups

In order to simplify the following discussion, the FSB signals have been combined into
groups by buffer type. AGTL+ input signals have differential input buffers, which use
GTLREF as a reference level. In this document, the term AGTL+ Input refers to the
AGTL+ input group as well as the AGTL+ I/O group when receiving. Similarly, AGTL+
Output refers to the AGTL+ output group as well as the AGTL+ I/O group when
driving.
With the implementation of a source synchronous data bus comes the need to specify
two sets of timing parameters. One set is for common clock signals which are
dependant upon the rising edge of BCLK0 (ADS#, HIT#, HITM#, etc.) and the second
set is for the source synchronous signals which are relative to their respective strobe
lines (data and address) as well as the rising edge of BCLK0. Asychronous signals are
still present (A20M#, IGNNE#, etc.) and can become active at any time during the
clock cycle. Table 5 identifies which signals are common clock, source synchronous,
and asynchronous.
Datasheet 21
Table 5. FSB Pin Groups
Signal Group Type Signals1
AGTL+ Common Clock Synchronous BPRI#, DEFER#, DPWR#, PREQ#, RESET#,

Input to BCLK[1:0] RS[2:0]#, TRDY#
Synchronous ADS#, BNR#, BPM[3:0]#3, BR0#, DBSY#,
AGTL+ Common Clock I/O
to BCLK[1:0] DRDY#, HIT#, HITM#, LOCK#, PRDY#3
Signals Associated Strobe
REQ[4:0]#,
ADSTB[0]#
A[16:3]#
Synchronous
AGTL+ Source A[31:17]# ADSTB[1]#
to assoc.
Synchronous I/O
strobe D[15:0]#, DINV0# DSTBP0#, DSTBN0#
D[31:16]#, DINV1# DSTBP1#, DSTBN1#
Synchronous
AGTL+ Strobes ADSTB[1:0]#, DSTBP[3:0]#, DSTBN[3:0]#
to BCLK[1:0]
A20M#, DPRSTP#, DPSLP#, IGNNE#, INIT#,
CMOS Input Asynchronous LINT0/INTR, LINT1/NMI, PWRGOOD, SMI#, SLP#,
STPCLK#
Open Drain Output Asynchronous FERR#, IERR#, THERMTRIP#
Open Drain I/O Asynchronous PROCHOT#4
CMOS Output Asynchronous PSI#, VID[6:0], BSEL[2:0]
Synchronous
CMOS Input TCK, TDI, TMS, TRST#
to TCK
Synchronous
Open Drain Output TDO
to TCK
FSB Clock Clock BCLK[1:0]
COMP[3:0], DBR#2, GTLREF, RSVD, TEST2,
Power/Other TEST1, THERMDA, THERMDC, VCC, VCCA, VCCP,
VCC_SENSE, VSS, VSS_SENSE
NOTES:
1. Refer to Table 16 for signal descriptions and termination requirements.
2. In processor systems where there is no debug port implemented on the system board,
these signals are used to support a debug port interposer. In systems with the debug port
implemented on the system board, these signals are no connects.
3. BPM[2:1]# and PRDY# are AGTL+ output only signals.
4. PROCHOT# signal type is open drain output and CMOS input.
22 Datasheet
3.8 CMOS Signals

CMOS input signals are shown in Table 5. Legacy output FERR#, IERR# and other non-
AGTL+ signals (THERMTRIP# and PROCHOT#) utilize Open Drain output buffers. These
signals do not have setup or hold time specifications in relation to BCLK[1:0]. However,
all of the CMOS signals are required to be asserted for at least three BCLKs in order for
the processor to recognize them. See Section 3.10 for the DC specifications for the
CMOS signal groups.
3.9 Maximum Ratings

Table 6 specifies absolute maximum and minimum ratings. Only within specified
operation limits, can functionality and long-term reliability be expected.
At condition outside functional operation condition limits, but within absolute maximum
and minimum ratings, neither functionality nor long term reliability can be expected. If
a device is returned to conditions within functional operation limits after having been
subjected to conditions outside these limits, but within the absolute maximum and
minimum ratings, the device may be functional, but with its lifetime degraded on
exposure to conditions exceeding the functional operation condition limits.
At conditions exceeding absolute maximum and minimum ratings, neither functionality

nor long term reliability can be expected. Moreover, if a device is subjected to these
conditions for any length of time then, when returned to conditions within the
functional operating condition limits, it will either not function or its reliability will be
severely degraded.
Although the processor contains protective circuitry to resist damage from electro static
discharge, precautions should always be taken to avoid high static voltages or electric
fields.
Table 6. Processor DC Absolute Maximum Ratings
Symbol Parameter Min Max Unit Notes
TSTORAGE Processor storage temperature -40 85 C 2

Any processor supply voltage with respect
VCC -0.3 1.6 V 1
to VSS
AGTL+ buffer DC input voltage with
VinAGTL+ -0.3 1.6 V 1, 2
respect to VSS
CMOS buffer DC input voltage with respect
VinAsynch_CMOS -0.3 1.6 V 1, 2
to VSS
NOTES:
1. This rating applies to any processor pin.
2. Contact Intel for storage requirements in excess of one year.
Datasheet 23
3.10 Processor DC Specifications

The processor DC specifications in this section are defined at the processor
core (pads) unless noted otherwise. See Table 5 for the pin signal definitions and
signal pin assignments. Most of the signals on the FSB are in the AGTL+ signal group.
The DC specifications for these signals are listed in Table 9. DC specifications for the
CMOS group are listed in Table 10.
Table 7 through Table 11 list the DC specifications for the processor and are valid only
while meeting specifications for junction temperature, clock frequency, and input
voltages. The Highest Frequency Mode (HFM) and Lowest Frequency Mode (LFM) refer
to the highest and lowest core operating frequencies supported on the processor. Active
mode load line specifications apply in all states. VCC,BOOT is the default voltage driven
by the voltage regulator at power up in order to set the VID values. Unless specified
otherwise, all specifications for the processor are at Tjunction = 100C. Care should be
taken to read all notes associated with each parameter.
Table 7. Voltage and Current Specifications for Standard Voltage Processor
Symbol Parameter Min Typ Max Unit Notes
VCCHFM VCC at Highest Frequency Mode (HFM) 1 1.3 V 1, 2

VCCLFM VCC at Lowest Frequency Mode (LFM) 1.025 V 2
Default VCC Voltage for Initial Power-
VCC,BOOT 1.2 V 2, 7, 9
up
VCCP AGTL+ Termination Voltage 1.102 V 2
VCCA PLL Supply Voltage 1.425 1.5 1.575 V
ICC for Intel Pentium Dual-Core
ICCDES Mobile Processor Recommended 36 A 5
Design Target
ICC for Pentium Dual-Core Mobile
Processor
Processor
Core Frequency/Voltage
Number
ICC
T2060 1.60 GHz and HFM VCC 36 A 3
T2080 1.73 GHz and HFM Vcc 36 A 3
T2130 1.86 GHz and HFM Vcc 36 A 3
ICC Auto-Halt & Stop-Grant
IAH,
LFM 12.5 A 3,4
Isgnt
HFM 23.3
ICC Sleep
ISLP LFM 12.4 A 3,4
HFM 23.2
VCC Power Supply Current Slew Rate
dICC/DT 600 A/s 6, 8
at CPU Package Pin
ICCA ICC for VCCA Supply 120 mA
ICC for VCCP Supply before VCC Stable 6.0 A 11
ICCP
ICC for VCCP Supply after VCC Stable 2.5 A 10
NOTES:
24 Datasheet
1. Each processor is programmed with a maximum valid voltage identification value (VID),
which is set at manufacturing and can not be altered. Individual maximum VID values are
calibrated during manufacturing such that two processors at the same frequency may have
different settings within the VID range. Note that this differs from the VID employed by the
processor during a power management event (Intel Thermal Monitor 2, Enhanced Intel
SpeedStep Technology, or Enhanced Halt state).
2. The voltage specifications are assumed to be measured across VCC_SENSE and VSS_SENSE
pins at socket with a 100-MHz bandwidth oscilloscope, 1.5-pF maximum probe
capacitance, and 1-M minimum impedance. The maximum length of ground wire on the
probe should be less than 5 mm. Ensure external noise from the system is not coupled in
the scope probe.
3. Specified at 100C Tj.
4. Specified at the VID voltage.
5. The ICCDES(max) specification of 36 A comprehends only processor standard voltage HFM
frequencies. Platforms should be designed to 44 A to be compatible with Intel Centrino
Duo Processor Technology.
6. Based on simulations and averaged over the duration of any change in current. Specified
by design/characterization at nominal VCC. Not 100% tested.
7. Measured at the bulk capacitors on the motherboard.
8. VCC,BOOT tolerance is shown in Figure 3.
9. This is a steady-state ICCP current specification, which is applicable when both VCCP and
VCC_CORE are high.
10. This is a power-up peak current specification, which is applicable when VCCP is high and
VCC_CORE is low.
11. Specified at the nominal VCC.
Datasheet 25
Figure 3. Active VCC and ICC Loadline for the Processor
VCC [V]
Slope = -2.1 mV/A at package
VccSense, VssSense pins.
Differential Remote Sense required.
VCC max {HFM|LFM}
VCC, DC max {HFM|LFM}

10mV= RIPPLE
VCC nom {HFM|LFM}
VCC, DC min {HFM|LFM}
VCC min {HFM|LFM}

+/-VCC nom * 1.5%
= VR St. Pt. Error 1/
ICC [A]
0 ICC max {HFM|LFM}
Note 1/ V CC Set Point Error Tolerance is per below:
Tolerance V CC Active Mode VID Code Range

--------------- --------------------------------------------------------
+/-1.5% V CC > 0.7500V (VID 0111100).
+/-11.5mV V CC < 0.7500V (VID 0111100)
NOTE: For low voltage, if PSI# is not asserted then the 13-mV ripple allowance becomes 10 mV.
26 Datasheet
Table 8. FSB Differential BCLK Specifications
VIH Input High Voltage 0.660 0.710 0.85 V 1

VIL Input Low Voltage 0 V 1
VCROSS Crossing Voltage 0.25 0.35 0.55 V 1, 2
VCROSS Range of Crossing Points 0.14 V 1, 6
VTH Threshold Region VCROSS -0.100 VCROSS+0.100 V 1, 3
ILI Input Leakage Current 100 A 1, 4
Cpad Pad Capacitance 0.95 1.2 1.45 pF 1, 5
NOTES:
1. Unless otherwise noted, all specifications in this table apply to all processor frequencies.
2. Crossing Voltage is defined as absolute voltage where rising edge of BCLK0 is equal to the falling edge of
BCLK1.
3. Threshold Region is defined as a region entered about the crossing voltage in which the differential receiver
switches. It includes input threshold hysteresis.
4. For Vin between 0 V and VIH.
5. Cpad includes die capacitance only. No package parasitics are included.
6. VCROSS is defined as the total variation of all crossing voltages as defined in note 2.
Table 9. AGTL+ Signal Group DC Specifications
VCCP I/O Voltage 0.997 1.05 1.102 V 1

GTLREF Reference Voltage 2/3 VCCP V 1, 6
VIH Input High Voltage GTLREF+0.1 VCCP+0.1 V 1, 3,6
VIL Input Low Voltage -0.1 0 GTLREF-0.1 V 1, 2,4
VOH Output High Voltage VCCP 1, 6
RTT Termination Resistance 50 55 61 1, 7,10
RON Buffer on Resistance 22.3 25.5 28.7 1, 5
NOTES:
2. VIL is defined as the maximum voltage level at a receiving agent that will be interpreted as a logical low
value.
3. VIH is defined as the minimum voltage level at a receiving agent that will be interpreted as a logical high
value.
4. VIH and VOH may experience excursions above VCCP. However, input signal drivers must comply with the
signal quality specifications.
5. This is the pull-down driver resistance. Refer to processor I/O Buffer Models for I/V characteristics.
Measured at 0.31*VCCP. RON (min) = 0.38*RTT, RON (typ) = 0.45*RTT, RON (max) = 0.52*RTT.
6. GTLREF should be generated from VCCP with a 1% tolerance resistor divider. Tolerance of resistor divider
decides the tolerance of GTLREF. The VCCP referred to in these specifications is the instantaneous VCCP.
7. RTT is the on-die termination resistance measured at VOL of the AGTL+ output driver. Measured at
0.31*VCCP. RTT is connected to VCCP on die. Refer to processor I/O buffer models for I/V characteristics.
8. Specified with on die RTT and RON are turned off.
10. This spec applies to all AGTL+ signals except for PREQ#. RTT for PREQ# is between 1.5 k to 6.0 k.
Datasheet 27
Table 10. CMOS Signal Group DC Specifications
VCCP I/O Voltage 1.0 1.05 1.10 V 1

VIH Input High Voltage 0.7 1.05 1.20 V 1, 2
VIL Input Low Voltage CMOS -0.1 0.0 0.33 V 1, 2, 3
VOH Output High Voltage 0.9 VCCP 1.20 V 1, 2
VOL Output Low Voltage -0.1 0 0.11 V 1, 2
IOH Output High Current 1.3 4.1 mA 1, 5
IOL Output Low Current 1.3 4.1 mA 1, 4
Cpad1 Pad Capacitance 1.8 2.3 2.75 pF 1, 7
Cpad2 Pad Capacitance for CMOS Input 0.95 1.2 1.45 pF 1, 8
NOTES:
2. The VCCP referred to in these specifications refers to instantaneous VCCP.
3. Refer to the processor I/O Buffer Models for I/V characteristics.
4. Measured at 0.1*VCCP.
6. For Vin between 0 V and VCCP. Measured when the driver is tristated.
7. Cpad1 includes die capacitance only for DPSLP#,PWRGOOD. No package parasitics are included.
8. Cpad2 includes die capacitance for all other CMOS input signals. No package parasitics are included.
Table 11. Open Drain Signal Group DC Specifications
VOH Output High Voltage 1.0 1.05 1.10 V 1, 3

VOL Output Low Voltage 0 0.20 V
IOL Output Low Current 11.40 50 mA 1, 2
ILO Output Leakage Current 200 A 1, 4
NOTES:
3. VOH is determined by value of the external pull-up resistor to VCCP. Please refer to platform design guide for
details.
4. For Vin between 0 V and VOH.
28 Datasheet
Package Mechanical Specifications and Pin Information
4 Package Mechanical
Specifications and Pin
Information
4.1 Package Mechanical Specifications
The processor is available in 478-pin Micro-FCPGA package. The package mechanical
dimensions are shown in Figure 4 through Figure 5.
Datasheet 29
30
Figure 4.

!

Side View Bottom View
!
Top View

1

50 0&0
2/3 2&3
50 0&0
Front View 2/3 2&3

23

% 23
-%*.$$ &5
'( )*#)% #"+#,% 2&03
50

2&3 2&3

0

203

0
203

00
2/03
Micro-FCPGA Processor Package Drawing Sheet 1 of 2
&/0 1 00

2&/3 2/03

&4&& !

2&&4&&&3 2&0&3
!
2&0&3

&00 &00

Detail A 2&&3 2&3
"#$% & /5 +#
/,

Datasheet
Datasheet
Figure 5.

%
"

!" &
&%! &"
"
&
!" &"

%
"
&%!
"

#
# Side View
$
$

%" Bottom View
Micro-FCPGA Processor Package Drawing Sheet 2 of 2
Top View

31
4.2 Processor Pinout and Pin List

Table 12 shows the top view pinout of the processor. The pin list is arranged in two
different formats is shown in the following pages.
Table 12. Processor Pin Coordinates from Top of the Package (Sheet 1 of 2)
1 2 3 4 5 6 7 8 9 10 11 12 13
A SMI# VSS FERR# A20M# VCC VSS VCC VCC VSS VCC VCC A
B RESET# RSVD INIT# LINT1 DPSLP# VSS VCC VSS VCC VCC VSS VCC VSS B
IGNNE THERM
C RSVD VSS RSVD VSS LINT0 VSS VCC VCC VSS VCC VCC C
# TRIP#
STPCLK PWRGO
D VSS RSVD RSVD VSS SLP# VSS VCC VCC VSS VCC VSS D
# OD
DPRSTP
E DBSY# BNR# VSS HITM# VSS VCC VSS VCC VCC VSS VCC VCC E
#
F BR0# VSS RS[0]# RS[1]# VSS RSVD VCC VSS VCC VCC VSS VCC VSS F
G VSS TRDY# RS[2]# VSS BPRI# HIT# G
REQ[1]
H ADS# VSS LOCK# DEFER# VSS H
#
REQ[3]
J A[9]# VSS A[3]# VSS VCCP J
#
REQ[2] REQ[0]
K VSS VSS A[6]# VCCP K
# #
ADSTB[ REQ[4]
L A[13]# VSS A[4]# VSS L
0]# #
M A[7]# VSS A[5]# RSVD VSS VCCP M
N VSS A[8]# A[10]# VSS RSVD VCCP N
P A[15]# A[12]# VSS A[14]# A[11]# VSS P
R A[16]# VSS A[19]# A[24]# VSS VCCP R
T VSS RSVD A[26]# VSS A[25]# VCCP T
U COMP[2] A[23]# VSS A[21]# A[18]# VSS U
ADSTB
V COMP[3] VSS RSVD VSS VCCP V
[1]#
W VSS A[30]# A[27]# VSS A[28]# A[20]# W
Y A[31]# A[17]# VSS A[29]# A[22]# VSS Y
AA RSVD VSS RSVD RSVD VSS TDI VCC VSS VCC VCC VSS VCC VCC AA
AB VSS RSVD TDO VSS TMS TRST# VCC VSS VCC VCC VSS VCC VSS AB
BPM[3]
AC PREQ# PRDY# VSS TCK VSS VCC VSS VCC VCC VSS VCC VCC AC
#
BPM[1] BPM[0]
AD BPM[2]# VSS VSS VID[0] VCC VSS VCC VCC VSS VCC VSS AD
# #
VSS
AE VSS VID[6] VID[4] VSS VID[2] PSI# VSS VCC VCC VSS VCC VCC AE
SENSE
VCC
AF RSVD VID[5] VSS VID[3] VID[1] VSS VSS VCC VCC VSS VCC VSS AF
SENSE
1 2 3 4 5 6 7 8 9 10 11 12 13
32 Datasheet
Table 13. Processor Pin Coordinates from Top of the Package (Sheet 2 of 2)
14 15 16 17 18 19 20 21 22 23 24 25 26
A VSS VCC VSS VCC VCC VSS VCC BCLK[1] BCLK[0] VSS THRMDA THRMDC VSS A
B VCC VCC VSS VCC VCC VSS VCC VSS BSEL[0] BSEL[1] VSS RSVD VCCA B
C VSS VCC VSS VCC VCC VSS DBR# BSEL[2] VSS RSVD RSVD VSS TEST1 C
PROC
D VCC VCC VSS VCC VCC VSS IERR# RSVD VSS DPWR# TEST2 VSS D
HOT#
E VSS VCC VSS VCC VCC VSS VCC VSS D[0]# D[7]# VSS D[6]# D[2]# E
F VCC VCC VSS VCC VCC VSS VCC DRDY# VSS D[4]# D[1]# VSS D[13]# F
DSTBP[0]
G VCCP VSS D[9]# D[5]# VSS G
#
DSTBN[0]
H VSS D[3]# VSS D[15]# D[12]# H
#
DINV[0
J VCCP VSS D[11]# D[10]# VSS J
]#
K VCCP D[14]# VSS D[8]# D[17]# VSS K
L VSS D[21]# D[22]# VSS D[20]# D[29]# L
DSTBN[1] DINV[1
M VCCP VSS D[23]# VSS M
# ]#
DSTBP[1]
N VCCP D[16]# VSS D[31]# VSS N
#
P VSS D[25]# D[26]# VSS D[24]# D[18]# P
COMP
R VCCP VSS D[19]# D[28]# VSS R
[0]
T VCCP RSVD VSS D[27]# D[30]# VSS T
COMP
U VSS D[39]# D[37]# VSS D[38]# U
[1]
V VCCP VSS DINV[2]# D[34]# VSS D[35]# V
DSTBN[2]
W VCCP D[41]# VSS D[36]# VSS W
#
Y DSTBP[2]
VSS D[45]# D[42]# VSS D[44]# Y
#
A
AA VSS VCC VSS VCC VCC VSS VCC D[51]# VSS D[32]# D[47]# VSS D[43]# A
A
AB VCC VCC VSS VCC VCC VSS VCC D[52]# D[50]# VSS D[33]# D[40]# VSS B
DINV[3
AC VSS VCC VSS VCC VCC VSS VSS D[48]# D[49]# VSS D[53]# D[46]# AC
]#
A DSTBN[3] A
VCC VCC VSS VCC VCC VSS D[54]# D[59]# VSS D[57]# VSS GTLREF
D # D
DSTBP[3]
AE VSS VCC VSS VCC VCC VSS VCC D[58]# D[55]# VSS # D[60]# VSS AE
AF VCC VCC VSS VCC VCC VSS VCC VSS D[62]# D[56]# VSS D[61]# D[63]# AF
14 15 16 17 18 19 20 21 22 23 24 25 26
Datasheet 33
34 Datasheet
Table 14. Pin Listing by Pin Name

Table 14. Pin Listing by Pin Name (Sheet 2 of 22)
(Sheet 1 of 22)
Signal
Pin
Signal Pin Name Buffer Direction
Pin Number
Pin Name Buffer Direction Type
Number
Type
Source Input/
Source Input/ A[24]# R4
Synch Output
A[3]# J4
Synch Output
Source Input/
A[25]# T5
Source Input/ Synch Output
A[4]# L4
Synch Output
Source Input/
A[26]# T3
A[5]# M3
Synch Output
Source Input/
Source Input/ A[27]# W3
Synch Output
A[6]# K5
Synch Output
Source Input/
A[28]# W5
A[7]# M1
Synch Output
Source Input/
A[29]# Y4
A[8]# N2
Synch Output
Source Input/
A[30]# W2
A[9]# J1
Synch Output
Source Input/
Source Input/ A[31]# Y1
Synch Output
A[10]# N3
Synch Output
A20M# A6 CMOS Input
Source Input/
A[11]# P5 Common Input/
Synch Output ADS# H1
Clock Output
Source Input/
A[12]# P2 Source Input/
Synch Output ADSTB[0]# L2
Synch Output
Source Input/
A[13]# L1 Source Input/
Synch Output ADSTB[1]# V4
Synch Output
Source Input/
A[14]# P4 BCLK[0] A22 Bus Clock Input
Synch Output
BCLK[1] A21 Bus Clock Input
Source Input/
A[15]# P1
Synch Output Common Input/
BNR# E2
Source Input/ Clock Output
A[16]# R1
BPM[0]# AD4
Clock Output
Source Input/
A[17]# Y2
Synch Output Common
BPM[1]# AD3 Output
Clock
Source Input/
A[18]# U5
Synch Output Common
BPM[2]# AD1 Output
Source Input/ Clock
A[19]# R3
BPM[3]# AC4
Clock Output
Source Input/
A[20]# W6
Synch Output Common
BPRI# G5 Input
Clock
Source Input/
A[21]# U4
BR0# F1
A[22]# Y5
Synch Output BSEL[0] B22 CMOS Output
Source Input/ BSEL[1] B23 CMOS Output
A[23]# U2
Synch Output
BSEL[2] C21 CMOS Output
Datasheet 35
Table 14. Pin Listing by Pin Name Table 14. Pin Listing by Pin Name
(Sheet 3 of 22) (Sheet 4 of 22)
Signal Signal
Pin Pin
Pin Name Buffer Direction Pin Name Buffer Direction
Number Number
Type Type
Power/ Input/ Source Input/

COMP[0] R26 D[17]# K25
Other Output Synch Output
COMP[1] U26 D[18]# P26
COMP[2] U1 D[19]# R23
COMP[3] V1 D[20]# L25
Source Input/ Source Input/
D[0]# E22 D[21]# L22
Synch Output Synch Output
D[1]# F24 D[22]# L23
D[2]# E26 D[23]# M23
D[3]# H22 D[24]# P25
D[4]# F23 D[25]# P22
D[5]# G25 D[26]# P23
D[6]# E25 D[27]# T24
D[7]# E23 D[28]# R24
D[8]# K24 D[29]# L26
D[9]# G24 D[30]# T25
D[10]# J24 D[31]# N24
D[11]# J23 D[32]# AA23
D[12]# H26 D[33]# AB24
D[13]# F26 D[34]# V24
D[14]# K22 D[35]# V26
D[15]# H25 D[36]# W25
D[16]# N22 D[37]# U23
36 Datasheet
Signal Signal
Pin Pin
Number Number
Type Type

D[38]# U25 D[59]# AD21
D[39]# U22 D[60]# AE25
D[40]# AB25 D[61]# AF25
D[41]# W22 D[62]# AF22
D[42]# Y23 D[63]# AF26
Source Input/ DBR# C20 CMOS Output
D[43]# AA26
Synch Output
Common Input/
DBSY# E1
D[44]# Y26
Synch Output
Common
DEFER# H5 Input
Source Input/ Clock
D[45]# Y22
Synch Output
Source Input/
DINV[0]# J26
D[46]# AC26
Synch Output
Source Input/
DINV[1]# M26
D[47]# AA24
Synch Output
Source Input/
DINV[2]# V23
D[48]# AC22
Synch Output
Source Input/
DINV[3]# AC20
D[49]# AC23
Synch Output
DPRSTP# E5 CMOS Not used
Source Input/
D[50]# AB22 DPSLP# B5 CMOS Input
Synch Output
Common
Source Input/ DPWR# D24 Input
D[51]# AA21 Clock
Synch Output
Common Input/
Source Input/ DRDY# F21
D[52]# AB21 Clock Output
Synch Output
Source Input/
Source Input/ DSTBN[0]# H23
D[53]# AC25 Synch Output
Synch Output
Source Input/
Source Input/ DSTBN[1]# M24
D[54]# AD20 Synch Output
Synch Output
Source Input/
Source Input/ DSTBN[2]# W24
D[55]# AE22 Synch Output
Synch Output
Source Input/
Source Input/ DSTBN[3]# AD23
D[56]# AF23 Synch Output
Synch Output
Source Input/
Source Input/ DSTBP[0]# G22
D[57]# AD24 Synch Output
Synch Output
Source Input/
Source Input/ DSTBP[1]# N25
D[58]# AE21 Synch Output
Synch Output
Datasheet 37
Signal Signal
Pin Pin
Number Number
Type Type
Source Input/ Common

DSTBP[2]# Y25 RS[1]# F4 Input
Synch Output Clock
Source Input/ Common
DSTBP[3]# AE24 RS[2]# G3 Input
Synch Output Clock
FERR# A5 Open Drain Output RSVD D2 Reserved
Power/ RSVD F6 Reserved
GTLREF AD26 Input
Other
RSVD D3 Reserved
Common Input/
HIT# G6 RSVD C1 Reserved
Clock Output
RSVD AF1 Reserved
Common Input/
HITM# E4
Clock Output RSVD D22 Reserved
IERR# D20 Open Drain Output RSVD C23 Reserved
IGNNE# C4 CMOS Input RSVD C24 Reserved
INIT# B3 CMOS Input RSVD AA1 Reserved
LINT0 C6 CMOS Input RSVD AA4 Reserved
LINT1 B4 CMOS Input RSVD AB2 Reserved
Common Input/ RSVD AA3 Reserved
LOCK# H4
Clock Output
RSVD M4 Reserved
Common
PRDY# AC2 Output RSVD N5 Reserved
Clock
RSVD T2 Reserved
Common
PREQ# AC1 Input
Clock RSVD V3 Reserved
Input/ RSVD B2 Reserved
PROCHOT# D21 Open Drain
Output
RSVD C3 Reserved
PSI# AE6 CMOS Output
RSVD T22 Reserved
PWRGOOD D6 CMOS Input
RSVD B25 Reserved
Source Input/
REQ[0]# K3 SLP# D7 CMOS Input
Synch Output
SMI# A3 CMOS Input
Source Input/
REQ[1]# H2
Synch Output STPCLK# D5 CMOS Input
Source Input/ TCK AC5 CMOS Input
REQ[2]# K2
Synch Output
TDI AA6 CMOS Input
Source Input/
REQ[3]# J3 TDO AB3 Open Drain Output
Synch Output
TEST1 C26 Test
Source Input/
REQ[4]# L5
Synch Output TEST2 D25 Test
Common Power/
RESET# B1 Input THERMDA A24
Clock Other
Common Power/
RS[0]# F3 Input THERMDC A25
Clock Other
38 Datasheet
Signal Signal
Pin Pin
Number Number
Type Type
THERMTRIP Power/
C7 Open Drain Output VCC AD15
# Other
TMS AB5 CMOS Input Power/
VCC AC15
Other
Common
TRDY# G2 Input
Clock Power/
VCC AF15
Other
TRST# AB6 CMOS Input
Power/
Power/ VCC AE15
VCC AB20 Other
Other
Power/
Power/ VCC AB14
VCC AA20 Other
Other
Power/
Power/ VCC AA13
VCC AF20 Other
Other
Power/
Power/ VCC AD14
VCC AE20 Other
Other
Power/
Power/ VCC AC13
VCC AB18 Other
Other
Power/
Power/ VCC AF14
VCC AB17 Other
Other
Power/
Power/ VCC AE13
VCC AA18 Other
Other
Power/
Power/ VCC AB12
VCC AA17 Other
Other
Power/
Power/ VCC AA12
VCC AD18 Other
Other
Power/
Power/ VCC AD12
VCC AD17 Other
Other
Power/
Power/ VCC AC12
VCC AC18 Other
Other
Power/
Power/ VCC AF12
VCC AC17 Other
Other
Power/
Power/ VCC AE12
VCC AF18 Other
Other
Power/
Power/ VCC AB10
VCC AF17 Other
Other
Power/
Power/ VCC AB9
VCC AE18 Other
Other
Power/
Power/ VCC AA10
VCC AE17 Other
Other
Power/
Power/ VCC AA9
VCC AB15 Other
Other
Power/
Power/ VCC AD10
VCC AA15 Other
Other
Datasheet 39
Signal Signal
Pin Pin
Number Number
Type Type
Power/ Power/
VCC AD9 VCC C18
Other Other
Power/ Power/
VCC AC10 VCC C17
Other Other
Power/ Power/
VCC AC9 VCC F18
Other Other
Power/ Power/
VCC AF10 VCC F17
Other Other
Power/ Power/
VCC AF9 VCC E18
Other Other
Power/ Power/
VCC AE10 VCC E17
Other Other
Power/ Power/
VCC AE9 VCC B15
Other Other
Power/ Power/
VCC AB7 VCC A15
Other Other
Power/ Power/
VCC AA7 VCC D15
Other Other
Power/ Power/
VCC AD7 VCC C15
Other Other
Power/ Power/
VCC AC7 VCC F15
Other Other
Power/ Power/
VCC B20 VCC E15
Other Other
Power/ Power/
VCC A20 VCC B14
Other Other
Power/ Power/
VCC F20 VCC A13
Other Other
Power/ Power/
VCC E20 VCC D14
Other Other
Power/ Power/
VCC B18 VCC C13
Other Other
Power/ Power/
VCC B17 VCC F14
Other Other
Power/ Power/
VCC A18 VCC E13
Other Other
Power/ Power/
VCC A17 VCC B12
Other Other
Power/ Power/
VCC D18 VCC A12
Other Other
Power/ Power/
VCC D17 VCC D12
Other Other
40 Datasheet
Signal Signal
Pin Pin
Number Number
Type Type
Power/ Power/
VCC C12 VCCP J6
Other Other
Power/ Power/
VCC F12 VCCP M6
Other Other
Power/ Power/
VCC E12 VCCP N6
Other Other
Power/ Power/
VCC B10 VCCP T6
Other Other
Power/ Power/
VCC B9 VCCP R6
Other Other
Power/ Power/
VCC A10 VCCP K21
Other Other
Power/ Power/
VCC A9 VCCP J21
Other Other
Power/ Power/
VCC D10 VCCP M21
Other Other
Power/ Power/
VCC D9 VCCP N21
Other Other
Power/ Power/
VCC C10 VCCP T21
Other Other
Power/ Power/
VCC C9 VCCP R21
Other Other
Power/ Power/
VCC F10 VCCP V21
Other Other
Power/ Power/
VCC F9 VCCP W21
Other Other
Power/ Power/
VCC E10 VCCP V6
Other Other
Power/ Power/
VCC E9 VCCP G21
Other Other
Power/ Power/
VCC B7 VCCSENSE AF7
Other Other
Power/ VID[0] AD6 CMOS Output
VCC A7
Other
VID[1] AF5 CMOS Output
Power/
VCC F7 VID[2] AE5 CMOS Output
Other
VID[3] AF4 CMOS Output
Power/
VCC E7
Other VID[4] AE3 CMOS Output
Power/ VID[5] AF2 CMOS Output
VCCA B26
Other
VID[6] AE2 CMOS Output
Power/
VCCP K6 Power/
Other VSS AB26
Other
Datasheet 41
Signal Signal
Pin Pin
Number Number
Type Type
Power/ Power/
VSS AA25 VSS AF16
Other Other
Power/ Power/
VSS AD25 VSS AE16
Other Other
Power/ Power/
VSS AE26 VSS AB13
Other Other
Power/ Power/
VSS AB23 VSS AA14
Other Other
Power/ Power/
VSS AC24 VSS AD13
Other Other
Power/ Power/
VSS AF24 VSS AC14
Other Other
Power/ Power/
VSS AE23 VSS AF13
Other Other
Power/ Power/
VSS AA22 VSS AE14
Other Other
Power/ Power/
VSS AD22 VSS AB11
Other Other
Power/ Power/
VSS AC21 VSS AA11
Other Other
Power/ Power/
VSS AF21 VSS AD11
Other Other
Power/ Power/
VSS AB19 VSS AC11
Other Other
Power/ Power/
VSS AA19 VSS AF11
Other Other
Power/ Power/
VSS AD19 VSS AE11
Other Other
Power/ Power/
VSS AC19 VSS AB8
Other Other
Power/ Power/
VSS AF19 VSS AA8
Other Other
Power/ Power/
VSS AE19 VSS AD8
Other Other
Power/ Power/
VSS AB16 VSS AC8
Other Other
Power/ Power/
VSS AA16 VSS AF8
Other Other
Power/ Power/
VSS AD16 VSS AE8
Other Other
Power/ Power/
VSS AC16 VSS AA5
Other Other
42 Datasheet
Signal Signal
Pin Pin
Number Number
Type Type
Power/ Power/
VSS AD5 VSS V5
Other Other
Power/ Power/
VSS AC6 VSS U6
Other Other
Power/ Power/
VSS AF6 VSS Y6
Other Other
Power/ Power/
VSS AB4 VSS A4
Other Other
Power/ Power/
VSS AC3 VSS D4
Other Other
Power/ Power/
VSS AF3 VSS E3
Other Other
Power/ Power/
VSS AE4 VSS H3
Other Other
Power/ Power/
VSS AB1 VSS G4
Other Other
Power/ Power/
VSS AA2 VSS K4
Other Other
Power/ Power/
VSS AD2 VSS L3
Other Other
Power/ Power/
VSS AE1 VSS P3
Other Other
Power/ Power/
VSS B6 VSS N4
Other Other
Power/ Power/
VSS C5 VSS T4
Other Other
Power/ Power/
VSS F5 VSS U3
Other Other
Power/ Power/
VSS E6 VSS Y3
Other Other
Power/ Power/
VSS H6 VSS W4
Other Other
Power/ Power/
VSS J5 VSS D1
Other Other
Power/ Power/
VSS M5 VSS C2
Other Other
Power/ Power/
VSS L6 VSS F2
Other Other
Power/ Power/
VSS P6 VSS G1
Other Other
Power/ Power/
VSS R5 VSS K1
Other Other
Datasheet 43
Signal Signal
Pin Pin
Number Number
Type Type
Power/ Power/
VSS J2 VSS D19
Other Other
Power/ Power/
VSS M2 VSS C19
Other Other
Power/ Power/
VSS N1 VSS F19
Other Other
Power/ Power/
VSS T1 VSS E19
Other Other
Power/ Power/
VSS R2 VSS B16
Other Other
Power/ Power/
VSS V2 VSS A16
Other Other
Power/ Power/
VSS W1 VSS D16
Other Other
Power/ Power/
VSS A26 VSS C16
Other Other
Power/ Power/
VSS D26 VSS F16
Other Other
Power/ Power/
VSS C25 VSS E16
Other Other
Power/ Power/
VSS F25 VSS B13
Other Other
Power/ Power/
VSS B24 VSS A14
Other Other
Power/ Power/
VSS A23 VSS D13
Other Other
Power/ Power/
VSS D23 VSS C14
Other Other
Power/ Power/
VSS E24 VSS F13
Other Other
Power/ Power/
VSS B21 VSS E14
Other Other
Power/ Power/
VSS C22 VSS B11
Other Other
Power/ Power/
VSS F22 VSS A11
Other Other
Power/ Power/
VSS E21 VSS D11
Other Other
Power/ Power/
VSS B19 VSS C11
Other Other
Power/ Power/
VSS A19 VSS F11
Other Other
44 Datasheet
Signal Signal
Pin Pin
Number Number
Type Type
Power/ Power/
VSS E11 VSS N23
Other Other
Power/ Power/
VSS B8 VSS T23
Other Other
Power/ Power/
VSS A8 VSS U24
Other Other
Power/ Power/
VSS D8 VSS Y24
Other Other
Power/ Power/
VSS C8 VSS W23
Other Other
Power/ Power/
VSS F8 VSS H21
Other Other
Power/ Power/
VSS E8 VSS J22
Other Other
Power/ Power/
VSS G26 VSS M22
Other Other
Power/ Power/
VSS K26 VSS L21
Other Other
Power/ Power/
VSS J25 VSS P21
Other Other
Power/ Power/
VSS M25 VSS R22
Other Other
Power/ Power/
VSS N26 VSS V22
Other Other
Power/ Power/
VSS T26 VSS U21
Other Other
Power/ Power/
VSS R25 VSS Y21
Other Other
Power/ Power/
VSS V25 VSSSENSE AE7 Output
Other Other
Power/
VSS W26
Other
Power/
VSS H24
Other
Power/
VSS G23
Other
Power/
VSS K23
Other
Power/
VSS L24
Other
Power/
VSS P24
Other
Datasheet 45
Table 15. Pin Listing by Pin Number

(Sheet 2 of 16)
Table 15. Pin Listing by Pin Number
(Sheet 1 of 16) Pin Signal
Pin Name Direction
Number Buffer Type
Pin Signal AA12 VCC Power/Other
Pin Name Direction
Number Buffer Type
AA13 VCC Power/Other
A3 SMI# CMOS Input
AA14 VSS Power/Other
A4 VSS Power/Other
A5 FERR# Open Drain Output
A6 A20M# CMOS Input
A7 VCC Power/Other
A8 VSS Power/Other
A9 VCC Power/Other
A10 VCC Power/Other
Input/
AA21 D[51]# Source Synch
A11 VSS Power/Other Output
A12 VCC Power/Other AA22 VSS Power/Other
A13 VCC Power/Other Input/
Output
A14 VSS Power/Other
Input/
A15 VCC Power/Other AA24 D[47]# Source Synch
Output
A16 VSS Power/Other
A17 VCC Power/Other
Input/
A18 VCC Power/Other Output
A19 VSS Power/Other AB1 VSS Power/Other
A20 VCC Power/Other AB2 RSVD Reserved
A21 BCLK[1] Bus Clock Input AB3 TDO Open Drain Output
A22 BCLK[0] Bus Clock Input AB4 VSS Power/Other
A23 VSS Power/Other AB5 TMS CMOS Input
A24 THERMDA Power/Other AB6 TRST# CMOS Input
A25 THERMDC Power/Other AB7 VCC Power/Other
A26 VSS Power/Other AB8 VSS Power/Other
AA1 RSVD Reserved AB9 VCC Power/Other
AA2 VSS Power/Other AB10 VCC Power/Other
AA3 RSVD Reserved AB11 VSS Power/Other
AA4 RSVD Reserved AB12 VCC Power/Other
AA5 VSS Power/Other AB13 VSS Power/Other
AA6 TDI CMOS Input AB14 VCC Power/Other
AA7 VCC Power/Other AB15 VCC Power/Other
AA8 VSS Power/other AB16 VSS Power/Other
AA11 VSS Power/Other AB19 VSS Power/Other
46 Datasheet
Table 15. Pin Listing by Pin Number Table 15. Pin Listing by Pin Number
Pin Signal Pin Signal

Pin Name Direction Pin Name Direction
Number Buffer Type Number Buffer Type
AB20 VCC Power/Other AC24 VSS Power/Other

Input/ Input/
AB21 D[52]# Source Synch AC25 D[53]# Source Synch
Output Output
Input/ Input/
AB22 D[50]# Source Synch AC26 D[46]# Source Synch
Output Output
AB23 VSS Power/Other Common
AD1 BPM[2]# Output
Clock
Input/
AB24 D[33]# Source Synch
Output AD2 VSS Power/Other
Input/ Common
AB25 D[40]# Source Synch AD3 BPM[1]# Output
Output Clock
AB26 VSS Power/Other Common Input/
AD4 BPM[0]#
Clock Output
Common
AC1 PREQ# Input
Clock AD5 VSS Power/Other
Common AD6 VID[0] CMOS Output
AC2 PRDY# Output
Clock
AD7 VCC Power/Other
AC3 VSS Power/Other
AD8 VSS Power/Other
Common Input/
AC4 BPM[3]# AD9 VCC Power/Other
Clock Output
AD10 VCC Power/Other
AC5 TCK CMOS Input
AD11 VSS Power/Other
AC6 VSS Power/Other
AC7 VCC Power/Other
AC8 VSS Power/Other
AC9 VCC Power/Other
AC10 VCC Power/Other
AC11 VSS Power/Other
Input/
AC15 VCC Power/Other AD20 D[54]# Source Synch
Output
Input/
AD21 D[59]# Source Synch
AC17 VCC Power/Other Output
AC18 VCC Power/Other AD22 VSS Power/Other
AC19 VSS Power/Other DSTBN[3] Input/
AD23 Source Synch
# Output
Input/
AC20 DINV[3]# Source Synch
Output Input/
AD24 D[57]# Source Synch
Output
Input/
AC22 D[48]# Source Synch
Output AD26 GTLREF Power/Other Input
Input/ AE1 VSS Power/Other
AC23 D[49]# Source Synch
Output
Datasheet 47

AE2 VID[6] CMOS Output AF10 VCC Power/Other

AE3 VID[4] CMOS Output AF11 VSS Power/Other
AE4 VSS Power/Other AF12 VCC Power/Other
AE5 VID[2] CMOS Output AF13 VSS Power/Other
AE6 PSI# CMOS Output AF14 VCC Power/Other
AE7 VSSSENSE Power/Other Output AF15 VCC Power/Other
AE8 VSS Power/Other AF16 VSS Power/Other
AE9 VCC Power/Other AF17 VCC Power/Other
AE11 VSS Power/Other AF19 VSS Power/Other
AE13 VCC Power/Other AF21 VSS Power/Other
AE14 VSS Power/Other Input/
AF22 D[62]# Source Synch
Output
AE15 VCC Power/Other
Input/
AE16 VSS Power/Other AF23 D[56]# Source Synch
Output
AF24 VSS Power/Other
Input/
AE19 VSS Power/Other Output
AE20 VCC Power/Other Input/
Output
Input/
AE21 D[58]# Source Synch
Output Common
B1 RESET# Input
Clock
Input/
AE22 D[55]# Source Synch
Output B2 RSVD Reserved
AE23 VSS Power/Other B3 INIT# CMOS Input
Input/ B4 LINT1 CMOS Input
AE24 DSTBP[3]# Source Synch
Output
B5 DPSLP# CMOS Input
Input/
AE25 D[60]# Source Synch B6 VSS Power/Other
Output
B7 VCC Power/Other
AE26 VSS Power/Other
B8 VSS Power/Other
AF1 RSVD Reserved
B9 VCC Power/Other
AF2 VID[5] CMOS Output
B10 VCC Power/Other
AF3 VSS Power/Other
B11 VSS Power/Other
B12 VCC Power/Other
B13 VSS Power/Other
AF6 VSS Power/Other
B14 VCC Power/Other
AF7 VCCSENSE Power/Other
B15 VCC Power/Other
AF8 VSS Power/Other
B16 VSS Power/Other
AF9 VCC Power/Other
48 Datasheet

B17 VCC Power/Other D1 VSS Power/Other

B18 VCC Power/Other D2 RSVD Reserved
B19 VSS Power/Other D3 RSVD Reserved
B20 VCC Power/Other D4 VSS Power/Other
B21 VSS Power/Other D5 STPCLK# CMOS Input
B22 BSEL[0] CMOS Output D6 PWRGOOD CMOS Input
B23 BSEL[1] CMOS Output D7 SLP# CMOS Input
B24 VSS Power/Other D8 VSS Power/Other
B25 RSVD Reserved D9 VCC Power/Other
B26 VCCA Power/Other D10 VCC Power/Other
C1 RSVD Reserved D11 VSS Power/Other
C2 VSS Power/Other D12 VCC Power/Other
C3 RSVD Reserved D13 VSS Power/Other
C4 IGNNE# CMOS Input D14 VCC Power/Other
C5 VSS Power/Other D15 VCC Power/Other
C6 LINT0 CMOS Input D16 VSS Power/Other
THERMTRI D17 VCC Power/Other
C7 Open Drain Output
P#
D18 VCC Power/Other
C8 VSS Power/Other
D19 VSS Power/Other
C9 VCC Power/Other
D20 IERR# Open Drain Output
C10 VCC Power/Other
Input/
D21 PROCHOT# Open Drain
C11 VSS Power/Other Output
C12 VCC Power/Other D22 RSVD Reserved
C13 VCC Power/Other D23 VSS Power/Other
C14 VSS Power/Other Common
D24 DPWR# Input
Clock
C15 VCC Power/Other
D25 TEST2 Test
C16 VSS Power/Other
D26 VSS Power/Other
C17 VCC Power/Other
Common Input/
C18 VCC Power/Other E1 DBSY#
Clock Output
C19 VSS Power/Other
Common Input/
E2 BNR#
C20 DBR# CMOS Output Clock Output
C21 BSEL[2] CMOS Output E3 VSS Power/Other
C22 VSS Power/Other Common Input/
E4 HITM#
Clock Output
C23 RSVD Reserved
E5 DPRSTP# CMOS Not used
C24 RSVD Reserved
E6 VSS Power/Other
C25 VSS Power/Other
E7 VCC Power/Other
C26 TEST1 Test
Datasheet 49

E8 VSS Power/Other F14 VCC Power/Other

E9 VCC Power/Other F15 VCC Power/Other
E10 VCC Power/Other F16 VSS Power/Other
E12 VCC Power/Other F18 VCC Power/Other
E13 VCC Power/Other F19 VSS Power/Other
E15 VCC Power/Other Common Input/
F21 DRDY#
Clock Output
E16 VSS Power/Other
F22 VSS Power/Other
E17 VCC Power/Other
Input/
E18 VCC Power/Other F23 D[4]# Source Synch
Output
E19 VSS Power/Other
Input/
F24 D[1]# Source Synch
E20 VCC Power/Other Output
E21 VSS Power/Other F25 VSS Power/Other
Input/ Input/
E22 D[0]# Source Synch F26 D[13]# Source Synch
Output Output
Input/ G1 VSS Power/Other
E23 D[7]# Source Synch
Output
Common
G2 TRDY# Input
E24 VSS Power/Other Clock
Input/ Common
E25 D[6]# Source Synch G3 RS[2]# Input
Output Clock
Input/ G4 VSS Power/Other
E26 D[2]# Source Synch
Output
Common
G5 BPRI# Input
Common Input/ Clock
F1 BR0#
Clock Output
Common Input/
G6 HIT#
F2 VSS Power/Other Clock Output
Common G21 VCCP Power/Other
F3 RS[0]# Input
Clock
Input/
G22 DSTBP[0]# Source Synch
Common Output
F4 RS[1]# Input
Clock
G23 VSS Power/Other
F5 VSS Power/Other
Input/
G24 D[9]# Source Synch
F6 RSVD Reserved Output
F7 VCC Power/Other Input/
G25 D[5]# Source Synch
Output
F8 VSS Power/Other
G26 VSS Power/Other
F9 VCC Power/Other
Common Input/
F10 VCC Power/Other H1 ADS#
Clock Output
F11 VSS Power/Other
Input/
H2 REQ[1]# Source Synch
F12 VCC Power/Other Output
F13 VSS Power/Other H3 VSS Power/Other
50 Datasheet

Common Input/ K6 VCCP Power/Other

H4 LOCK#
Clock Output
K21 VCCP Power/Other
Common
H5 DEFER# Input Input/
Clock K22 D[14]# Source Synch
Output
H6 VSS Power/Other
K23 VSS Power/Other
H21 VSS Power/Other
Input/
K24 D[8]# Source Synch
Input/ Output
H22 D[3]# Source Synch
Output
Input/
K25 D[17]# Source Synch
DSTBN[0] Input/ Output
H23 Source Synch
# Output
K26 VSS Power/Other
H24 VSS Power/Other
Input/
L1 A[13]# Source Synch
Input/ Output
Output
Input/
L2 ADSTB[0]# Source Synch
Input/ Output
Output
L3 VSS Power/Other
Input/
J1 A[9]# Source Synch Input/
Output L4 A[4]# Source Synch
Output
J2 VSS Power/Other
Input/
L5 REQ[4]# Source Synch
Input/ Output
J3 REQ[3]# Source Synch
Output
L6 VSS Power/Other
Input/
J4 A[3]# Source Synch L21 VSS Power/Other
Output
Input/
J5 VSS Power/Other L22 D[21]# Source Synch
Output
J6 VCCP Power/Other
Input/
L23 D[22]# Source Synch
J21 VCCP Power/Other Output
J22 VSS Power/Other L24 VSS Power/Other
Input/ Input/
J23 D[11]# Source Synch L25 D[20]# Source Synch
Output Output
Input/ Input/
J24 D[10]# Source Synch L26 D[29]# Source Synch
Output Output
J25 VSS Power/Other Input/
M1 A[7]# Source Synch
Output
Input/
J26 DINV[0]# Source Synch
Output M2 VSS Power/Other
K1 VSS Power/Other Input/
M3 A[5]# Source Synch
Output
Input/
K2 REQ[2]# Source Synch
Output M4 RSVD Reserved
Input/ M5 VSS Power/Other
K3 REQ[0]# Source Synch
Output
M6 VCCP Power/Other
K4 VSS Power/Other
M21 VCCP Power/Other
Input/
K5 A[6]# Source Synch M22 VSS Power/Other
Output
Datasheet 51

Input/ Input/
M23 D[23]# Source Synch P25 D[24]# Source Synch
Output Output
DSTBN[1] Input/ Input/
M24 Source Synch P26 D[18]# Source Synch
# Output Output
M25 VSS Power/Other Input/
R1 A[16]# Source Synch
Output
Input/
M26 DINV[1]# Source Synch
Output R2 VSS Power/Other
N1 VSS Power/Other Input/
Output
Input/
N2 A[8]# Source Synch
Output Input/
Output
Input/
N3 A[10]# Source Synch
Output R5 VSS Power/Other
N4 VSS Power/Other R6 VCCP Power/Other
N5 RSVD Reserved R21 VCCP Power/Other
N6 VCCP Power/Other R22 VSS Power/Other
N21 VCCP Power/Other Input/
R23 D[19]# Source Synch
Output
Input/
N22 D[16]# Source Synch
Output Input/
R24 D[28]# Source Synch
Output
N23 VSS Power/Other
R25 VSS Power/Other
Input/
N24 D[31]# Source Synch
Output Input/
R26 COMP[0] Power/Other
Output
Input/
N25 DSTBP[1]# Source Synch
Output T1 VSS Power/Other
N26 VSS Power/Other T2 RSVD Reserved
Input/ Input/
P1 A[15]# Source Synch T3 A[26]# Source Synch
Output Output
Input/ T4 VSS Power/Other
P2 A[12]# Source Synch
Output
Input/
T5 A[25]# Source Synch
P3 VSS Power/Other Output
Input/ T6 VCCP Power/Other
P4 A[14]# Source Synch
Output
T21 VCCP Power/Other
Input/
P5 A[11]# Source Synch T22 RSVD Reserved
Output
T23 VSS Power/Other
P6 VSS Power/Other
Input/
P21 VSS Power/Other T24 D[27]# Source Synch
Output
Input/
P22 D[25]# Source Synch Input/
Output T25 D[30]# Source Synch
Output
Input/
P23 D[26]# Source Synch T26 VSS Power/Other
Output
Input/
P24 VSS Power/Other U1 COMP[2] Power/Other
Output
52 Datasheet

Input/ Input/
U2 A[23]# Source Synch W5 A[28]# Source Synch
Output Output
U3 VSS Power/Other Input/
W6 A[20]# Source Synch
Output
Input/
U4 A[21]# Source Synch
Output W21 VCCP Power/Other
Input/ Input/
U5 A[18]# Source Synch W22 D[41]# Source Synch
Output Output
U6 VSS Power/Other W23 VSS Power/Other
U21 VSS Power/Other DSTBN[2] Input/
W24 Source Synch
# Output
Input/
U22 D[39]# Source Synch
Output Input/
W25 D[36]# Source Synch
Output
Input/
Output W26 VSS Power/Other
U24 VSS Power/Other Input/
Y1 A[31]# Source Synch
Output
Input/
Output Input/
Output
Input/
U26 COMP[1] Power/Other
Output Y3 VSS Power/Other
Input/ Input/
V1 COMP[3] Power/Other Y4 A[29]# Source Synch
Output Output
V2 VSS Power/Other Input/
Output
V3 RSVD Reserved
Y6 VSS Power/Other
Input/
V4 ADSTB[1]# Source Synch
Output Y21 VSS Power/Other
V5 VSS Power/Other Input/
Y22 D[45]# Source Synch
Output
V6 VCCP Power/Other
Input/
V21 VCCP Power/Other Y23 D[42]# Source Synch
Output
V22 VSS Power/Other
Y24 VSS Power/Other
Input/
V23 DINV[2]# Source Synch Input/
Output Y25 DSTBP[2]# Source Synch
Output
Input/
V24 D[34]# Source Synch Input/
Output Y26 D[44]# Source Synch
Output
V25 VSS Power/Other
Input/
V26 D[35]# Source Synch
Output
W1 VSS Power/Other
Input/
Output
Input/
Output
W4 VSS Power/Other
Datasheet 53
54 Datasheet
4.3 Alphabetical Signals Reference
Table 16. Signal Description (Sheet 1 of 8)
Name Type Description
A[31:3]# (Address) define a 232-byte physical memory address

space. In sub-phase 1 of the address phase, these pins transmit the
address of a transaction. In sub-phase 2, these pins transmit
Input/ transaction type information. These signals must connect the
A[31:3]#
Output appropriate pins of both agents on the processor FSB. A[31:3]# are
source synchronous signals and are latched into the receiving buffers
by ADSTB[1:0]#. Address signals are used as straps which are
sampled before RESET# is deasserted.
If A20M# (Address-20 Mask) is asserted, the processor masks
physical address bit 20 (A20#) before looking up a line in any
internal cache and before driving a read/write transaction on the bus.
Asserting A20M# emulates the 8086 processor's address wrap-
around at the 1-MB boundary. Assertion of A20M# is only supported
A20M# Input
in real mode.
A20M# is an asynchronous signal. However, to ensure recognition of
this signal following an Input/Output write instruction, it must be
valid along with the TRDY# assertion of the corresponding Input/
Output Write bus transaction.
ADS# (Address Strobe) is asserted to indicate the validity of the
transaction address on the A[31:3]# and REQ[4:0]# pins. All bus
Input/
ADS# agents observe the ADS# activation to begin parity checking,
Output
protocol checking, address decode, internal snoop, or deferred reply
ID match operations associated with the new transaction.
Address strobes are used to latch A[31:3]# and REQ[4:0]# on their
rising and falling edges. Strobes are associated with signals as shown
below:.
Input/ Signals Associated

ADSTB[1:0]#
Output Strobe
REQ[4:0]#, A[16:3]# ADSTB[0]#

A[31:17]# ADSTB[1]#
The differential pair BCLK (Bus Clock) determines the FSB frequency.
All FSB agents must receive these signals to drive their outputs and
BCLK[1:0] Input latch their inputs.
All external timing parameters are specified with respect to the rising
edge of BCLK0 crossing VCROSS.
BNR# (Block Next Request) is used to assert a bus stall by any bus
Input/
BNR# agent who is unable to accept new bus transactions. During a bus
Output
stall, the current bus owner cannot issue any new transactions.
BPM[3:0]# (Breakpoint Monitor) are breakpoint and performance
monitor signals. They are outputs from the processor which indicate
the status of breakpoints and programmable counters used for
Output
BPM[2:1]# monitoring processor performance. BPM[3:0]# should connect the
Input/ appropriate pins of all processor FSB agents.This includes debug or
BPM[3,0]#
Output performance monitoring tools.
For termination requirements please contact your Intel
representative.
Datasheet 55
BPRI# (Bus Priority Request) is used to arbitrate for ownership of the

FSB. It must connect the appropriate pins of both FSB agents.
Observing BPRI# active (as asserted by the priority agent) causes
BPRI# Input the other agent to stop issuing new requests, unless such requests
are part of an ongoing locked operation. The priority agent keeps
BPRI# asserted until all of its requests are completed, then releases
the bus by deasserting BPRI#.
BR0# is used by the processor to request the bus. The arbitration is
Input/
BR0# done between the processor (Symmetric Agent) and Mobile Intel
Output
945 Express Chipset family GMCH-M (High Priority Agent).
BSEL[2:0] (Bus Select) are used to select the processor input clock
frequency. Table 4 defines the possible combinations of the signals
and the frequency associated with each combination. The required
BSEL[2:0] Output frequency is determined by the processor, chipset and clock
synthesizer. All agents must operate at the same frequency. The
Intel Pentium dual-core mobile processor operates at 533-MHz
system bus frequency (133-MHz BCLK[1:0] frequency).
COMP[3:0] must be terminated on the system board using precision
COMP[3:0] Analog (1% tolerance) resistors. For termination requirements please
contact your Intel representative.
D[63:0]# (Data) are the data signals. These signals provide a 64-bit
data path between the FSB agents, and must connect the
appropriate pins on both agents. The data driver asserts DRDY# to
indicate a valid data transfer.
D[63:0]# are quad-pumped signals and will thus be driven four
times in a common clock period. D[63:0]# are latched off the falling
edge of both DSTBP[3:0]# and DSTBN[3:0]#. Each group of 16 data
signals correspond to a pair of one DSTBP# and one DSTBN#. The
following table shows the grouping of data signals to data strobes
and DINV#.
Quad-Pumped Signal Groups

Input/
D[63:0]# Data DSTBN#/
Output DINV#
Group DSTBP#
D[15:0]# 0 0
D[31:16]# 1 1
D[47:32]# 2 2
D[63:48]# 3 3
Furthermore, the DINV# pins determine the polarity of the data

signals. Each group of 16 data signals corresponds to one DINV#
signal. When the DINV# signal is active, the corresponding data
group is inverted and therefore sampled active high.
DBR# (Data Bus Reset) is used only in processor systems where no
debug port is implemented on the system board. DBR# is used by a
DBR# Output debug port interposer so that an in-target probe can drive system
reset. If a debug port is implemented in the system, DBR# is a no
connect in the system. DBR# is not a processor signal.
56 Datasheet
DBSY# (Data Bus Busy) is asserted by the agent responsible for

Input/ driving data on the FSB to indicate that the data bus is in use. The
DBSY#
Output data bus is released after DBSY# is deasserted. This signal must
connect the appropriate pins on both FSB agents.
DEFER# is asserted by an agent to indicate that a transaction cannot
be guaranteed in-order completion. Assertion of DEFER# is normally
DEFER# Input
the responsibility of the addressed memory or Input/Output agent.
This signal must connect the appropriate pins of both FSB agents.
DINV[3:0]# (Data Bus Inversion) are source synchronous and
indicate the polarity of the D[63:0]# signals. The DINV[3:0]# signals
are activated when the data on the data bus is inverted. The bus
agent will invert the data bus signals if more than half the bits, within
the covered group, would change level in the next cycle.
DINV[3:0]# Assignment to Data Bus

Input/ Bus Signal Data Bus Signals
DINV[3:0]#
Output
DINV[3]# D[63:48]#
DINV[2]# D[47:32]#
DINV[1]# D[31:16]#
DINV[0]# D[15:0]#
DPRSTP# Not used DPRSTP# is not used by Pentium dual-core mobile processor.
DPSLP# when asserted on the platform causes the processor to
transition from the Sleep State to the Deep Sleep state. In order to
DPSLP# Input
return to the Sleep State, DPSLP# must be deasserted. DPSLP# is
driven by the ICH7-M chipset.
DPWR# is a control signal from the Intel 945 Express Chipset used to
DPWR# Input
reduce power on the processor data bus input buffers.
DRDY# (Data Ready) is asserted by the data driver on each data
Input/ transfer, indicating valid data on the data bus. In a multi-common
DRDY#
Output clock data transfer, DRDY# may be deasserted to insert idle clocks.
This signal must connect the appropriate pins of both FSB agents.
Data strobe used to latch in D[63:0]#.
D[15:0]#, DINV[0]# DSTBN[0]#

Input/
DSTBN[3:0]#
Output D[31:16]#, DINV[1]# DSTBN[1]#
D[47:32]#, DINV[2]# DSTBN[2]#
D[63:48]#, DINV[3]# DSTBN[3]#
Datasheet 57
Data strobe used to latch in D[63:0]#.
D[15:0]#, DINV[0]# DSTBP[0]#

Input/
DSTBP[3:0]#
Output D[31:16]#, DINV[1]# DSTBP[1]#
D[47:32]#, DINV[2]# DSTBP[2]#
D[63:48]#, DINV[3]# DSTBP[3]#
FERR# (Floating-point Error)PBE#(Pending Break Event) is a

multiplexed signal and its meaning is qualified with STPCLK#. When
STPCLK# is not asserted, FERR#/PBE# indicates a floating point
when the processor detects an unmasked floating-point error. FERR#
is similar to the ERROR# signal on the Intel 387 coprocessor, and is
included for compatibility with systems using MS-DOS*-type
floating-point error reporting. When STPCLK# is asserted, an
assertion of FERR#/PBE# indicates that the processor has a pending
break event waiting for service. The assertion of FERR#/PBE#
indicates that the processor should be returned to the Normal state.
FERR#/PBE# Output When FERR#/PBE# is asserted, indicating a break event, it will
remain asserted until STPCLK# is deasserted. Assertion of PREQ#
when STPCLK# is active will also cause an FERR# break event.
For additional information on the pending break event functionality,
including identification of support of the feature and enable/disable
information, refer to Volume 3 of the Intel 64 and IA-32
Architectures Software Developer's Manuals and the Intel
Processor Identification and CPUID Instruction Application Note.
representative.
GTLREF determines the signal reference level for AGTL+ input pins.
GTLREF should be set at 2/3 VCCP. GTLREF is used by the AGTL+
GTLREF Input receivers to determine if a signal is a logical 0 or logical 1.For
termination requirements please contact your Intel representative
for details on GTLREF implementation.
Input/
HIT# Output HIT# (Snoop Hit) and HITM# (Hit Modified) convey transaction
snoop operation results. Either FSB agent may assert both HIT# and
HITM# together to indicate that it requires a snoop stall, which can
HITM# Input/ be continued by reasserting HIT# and HITM# together.
Output
IERR# (Internal Error) is asserted by a processor as the result of an
internal error. Assertion of IERR# is usually accompanied by a
SHUTDOWN transaction on the FSB. This transaction may optionally
be converted to an external error signal (e.g., NMI) by system core
IERR# Output logic. The processor will keep IERR# asserted until the assertion of
RESET#, BINIT#, or INIT#.
representative.
58 Datasheet
IGNNE# (Ignore Numeric Error) is asserted to force the processor to

ignore a numeric error and continue to execute noncontrol floating-
point instructions. If IGNNE# is deasserted, the processor generates
an exception on a noncontrol floating-point instruction if a previous
floating-point instruction caused an error. IGNNE# has no effect
IGNNE# Input when the NE bit in control register 0 (CR0) is set.
IGNNE# is an asynchronous signal. However, to ensure recognition of
this signal following an Input/Output write instruction, it must be
valid along with the TRDY# assertion of the corresponding Input/
Output Write bus transaction.
INIT# (Initialization), when asserted, resets integer registers inside
the processor without affecting its internal caches or floating-point
registers. The processor then begins execution at the power-on Reset
vector configured during power-on configuration. The processor
continues to handle snoop requests during INIT# assertion. INIT# is
an asynchronous signal. However, to ensure recognition of this signal
following an Input/Output Write instruction, it must be valid along
INIT# Input with the TRDY# assertion of the corresponding Input/Output Write
bus transaction. INIT# must connect the appropriate pins of both
FSB agents.
If INIT# is sampled active on the active to inactive transition of
RESET#, then the processor executes its Built-in Self-Test (BIST).
representative.
LINT[1:0] (Local APIC Interrupt) must connect the appropriate pins
of all APIC Bus agents. When the APIC is disabled, the LINT0 signal
becomes INTR, a maskable interrupt request signal, and LINT1
becomes NMI, a nonmaskable interrupt. INTR and NMI are backward
compatible with the signals of those names on the Pentium
LINT[1:0] Input processor. Both signals are asynchronous.
Both of these signals must be software configured via BIOS
programming of the APIC register space to be used either as NMI/
INTR or LINT[1:0]. Because the APIC is enabled by default after
Reset, operation of these pins as LINT[1:0] is the default
configuration.
LOCK# indicates to the system that a transaction must occur
atomically. This signal must connect the appropriate pins of both FSB
agents. For a locked sequence of transactions, LOCK# is asserted
from the beginning of the first transaction to the end of the last
Input/
LOCK# transaction.
Output
When the priority agent asserts BPRI# to arbitrate for ownership of
the FSB, it will wait until it observes LOCK# deasserted. This enables
symmetric agents to retain ownership of the FSB throughout the bus
locked operation and ensure the atomicity of lock.
Probe Ready signal used by debug tools to determine processor
PRDY# Output
debug readiness.
Probe Request signal used by debug tools to request debug operation
PREQ# Input
of the processor.
Datasheet 59
As an output, PROCHOT# (Processor Hot) will go active when the

processor temperature monitoring sensor detects that the processor
has reached its maximum safe operating temperature. This indicates
that the processor Thermal Control Circuit (TCC) has been activated,
if enabled. As an input, assertion of PROCHOT# by the system will
Input/ activate the TCC, if enabled. The TCC will remain active until the
PROCHOT# system deasserts PROCHOT#.
Output
By default PROCHOT# is configured as an output only. Bidirectional
PROCHOT# must be enabled via the BIOS.
This signal may require voltage translation on the motherboard.
representative.
Processor Power Status Indicator signal. This signal is asserted when
the processor is in a normal state (HFM and LFM) and lower state
PSI# Output (Deep Sleep).
representative.
PWRGOOD (Power Good) is a processor input. The processor requires
this signal to be a clean indication that the clocks and power supplies
are stable and within their specifications. Clean implies that the
signal will remain low (capable of sinking leakage current), without
glitches, from the time that the power supplies are turned on until
they come within specification. The signal must then transition
PWRGOOD Input
monotonically to a high state. The PWRGOOD signal must be
supplied to the processor; it is used to protect internal circuits
against voltage sequencing issues. It should be driven high
throughout boundary scan operation.
representative.
REQ[4:0]# (Request Command) must connect the appropriate pins
Input/ of both FSB agents. They are asserted by the current bus owner to
REQ[4:0]#
Output define the currently active transaction type. These signals are source
synchronous to ADSTB[0]#.
Asserting the RESET# signal resets the processor to a known state
and invalidates its internal caches without writing back any of their
contents. For a power-on Reset, RESET# must stay active for at least
two milliseconds after VCC and BCLK have reached their proper
specifications. On observing active RESET#, both FSB agents will
RESET# Input
deassert their outputs within two clocks. All processor straps must be
valid within the specified setup time before RESET# is deasserted.
representative.There is a 55 (nominal) on die pull-up resistor on
this signal.
RS[2:0]# (Response Status) are driven by the response agent (the
RS[2:0]# Input agent responsible for completion of the current transaction), and
must connect the appropriate pins of both FSB agents.
These pins are RESERVED and must be left unconnected on the
Reserved
board. However, it is recommended that routing channels to these
RSVD /No
pins on the board be kept open for possible future use. For
Connect
termination requirements please contact your Intel representative.
60 Datasheet
SLP# (Sleep), when asserted in Stop-Grant state, causes the

processor to enter the Sleep state. During Sleep state, the processor
stops providing internal clock signals to all units, leaving only the
Phase-Locked Loop (PLL) still operating. Processors in this state will
not recognize snoops or interrupts. The processor will recognize only
SLP# Input assertion of the RESET# signal, deassertion of SLP#, and removal of
the BCLK input while in Sleep state. If SLP# is deasserted, the
processor exits Sleep state and returns to Stop-Grant state,
restarting its internal clock signals to the bus and processor core
units. If DPSLP# is asserted while in the Sleep state, the processor
will exit the Sleep state and transition to the Deep Sleep state.
SMI# (System Management Interrupt) is asserted asynchronously by
system logic. On accepting a System Management Interrupt, the
processor saves the current state and enter System Management
SMI# Input Mode (SMM). An SMI Acknowledge transaction is issued, and the
processor begins program execution from the SMM handler.
If SMI# is asserted during the deassertion of RESET# the processor
will tristate its outputs.
STPCLK# (Stop Clock), when asserted, causes the processor to enter
a low power Stop-Grant state. The processor issues a Stop-Grant
Acknowledge transaction, and stops providing internal clock signals
to all processor core units except the FSB and APIC units. The
STPCLK# Input processor continues to snoop bus transactions and service interrupts
while in Stop-Grant state. When STPCLK# is deasserted, the
processor restarts its internal clock to all units and resumes
execution. The assertion of STPCLK# has no effect on the bus clock;
STPCLK# is an asynchronous input.
TCK (Test Clock) provides the clock input for the processor Test Bus
(also known as the Test Access Port).
TCK Input
representative.
TDI (Test Data In) transfers serial test data into the processor. TDI
provides the serial input needed for JTAG specification support.
TDI Input
representative.
TDO (Test Data Out) transfers serial test data out of the processor.
TDO provides the serial output needed for JTAG specification support.
TDO Output
representative.
TEST1 must have a stuffing option of separate pull down resistor to
TEST1 Input VSS. For termination requirements please contact your Intel
representative.
TEST2 must have a 51- 5% pull-down resistor to VSS. For
TEST2 Input
THERMDA Other Thermal Diode Anode.
THERMDC Other Thermal Diode Cathode.
Datasheet 61
The processor protects itself from catastrophic overheating by use of

an internal thermal sensor. This sensor is set well above the normal
operating temperature to ensure that there are no false trips. The
processor will stop all execution when the junction temperature
THERMTRIP# Output
exceeds approximately 125C. This is signalled to the system by the
THERMTRIP# (Thermal Trip) pin.
representative.
TMS (Test Mode Select) is a JTAG specification support signal used by
debug tools.
TMS Input
representative.
TRDY# (Target Ready) is asserted by the target to indicate that it is
ready to receive a write or implicit writeback data transfer. TRDY#
TRDY# Input must connect the appropriate pins of both FSB agents.
representative.
TRST# (Test Reset) resets the Test Access Port (TAP) logic. TRST#
must be driven low during power on Reset.
TRST# Input
representative.
VCC Input Processor core power supply.
VCCA provides isolated power for the internal processor core PLLs. For
VCCA Input
VCCP Input Processor I/O Power Supply.
VCC_SENSE together with VSS_SENSE are voltage feedback signals to
IMVP6 that control the 2.1-m loadline at the processor die. It
VCC_SENSE Output
should be used to sense voltage near the silicon with little noise. For
VID[6:0] (Voltage ID) pins are used to support automatic selection of
power supply voltages (VCC). Unlike some previous generations of
processors, these are CMOS signals that are driven by the processor.
The voltage supply for these pins must be valid before the VR can
VID[6:0] Output supply Vcc to the processor. Conversely, the VR output must be
disabled until the voltage supply for the VID pins becomes valid. The
VID pins are needed to support the processor voltage specification
variations. See Table 3.3 for definitions of these pins. The VR must
supply the voltage that is requested by the pins, or disable itself.
VSS_SENSE together with VCC_SENSE are voltage feedback signals to
Intel MVP6 that control the 2.1-m loadline at the processor die. It
VSS_SENSE Output
should be used to sense ground near the silicon with little noise. For
62 Datasheet
Thermal Specifications and Design Considerations
5 Thermal Specifications and

Design Considerations
The processor requires a thermal solution to maintain temperatures within operating
limits.
For optimal operation and long-term reliability of Intel processor-based systems, the
system/processor thermal solution should be designed so that the processor remains
within the minimum and maximum junction temperature (Tj) specifications at the
corresponding thermal design power (TDP) value listed in Table 17 to Table 21.
Warning: Any attempt to operate that processor outside these operating limits may result in
permanent damage to the processor and potentially other components in the system.
Table 17. Power Specifications
Processor Core Frequency Thermal Design

Symbol Unit Notes
Number & Voltage Power
At 100C
TDP T2060 1.60 GHz & HFM Vcc 31 W
Notes 1, 4, 5
At 100C
Notes 1, 4, 5
At 100C
Notes 1, 4, 5
Auto Halt, Stop Grant Power

PAH, 15.8 At 50C
at HFM VCC W
PSGNT 4.8 Note 2
at LFM VCC
Sleep Power
15.5 At 50C
PSLP at HFM VCC W
4.7 Note 2
at LFM VCC
Deep Sleep Power
At 35C
PDSLP at HFM VCC 10.5 W
Note 2
at LFM VCC 3.4
TJ Junction Temperature 0 100 C Notes 3, 4
NOTES:
1. The TDP specification should be used to design the processor thermal solution. The TDP is
not the maximum theoretical power the processor can generate.
2. Not 100% tested. These power specifications are determined by characterization of the
processor currents at higher temperatures and extrapolating the values for the
temperature indicated.
3. As measured by the activation of the on-die Intel Thermal Monitor. The Intel Thermal
Monitors automatic mode is used to indicate that the maximum TJ has been reached.
Refer to Section 5.1 for more details.
4. The Intel Thermal Monitor automatic mode must be enabled for the processor to operate
within specifications.
Datasheet 63
5.1 Monitoring Processor Temperature

The processor incorporates three methods of monitoring die temperature:
Digital thermal sensor
Intel Thermal Monitor
Thermal Diode
5.1.1 Thermal Diode

The processor incorporates an on-die PNP transistor whose base emitter junction is
used as a thermal diode, with its collector shorted to Ground. The thermal diode, can
be read by an off-die analog/digital converter (a thermal sensor) located on the
motherboard, or a stand-alone measurement kit. The thermal diode may be used to
monitor the die temperature of the processor for thermal management or
instrumentation purposes but is not a reliable indication that the maximum operating
temperature of the processor has been reached. When using the thermal diode, a
temperature offset value must be read from a processor Model Specific Register (MSR)
and applied. See Section 5.1.2 for more details. Please see Section 5.1.3 for thermal
diode usage recommendation when the PROCHOT# signal is not asserted.
Note: The reading of the external thermal sensor (on the motherboard) connected to the
processor thermal diode signals, will not necessarily reflect the temperature of the
hottest location on the die. This is due to inaccuracies in the external thermal sensor,
on-die temperature gradients between the location of the thermal diode and the hottest
location on the die, and time based variations in the die temperature measurement.
Time based variations can occur when the sampling rate of the thermal diode (by the
thermal sensor) is slower than the rate at which the TJ temperature can change.
Offset between the thermal diode based temperature reading and the Intel Thermal
Monitor reading may be characterized using the Intel Thermal Monitors Automatic
mode activation of thermal control circuit. This temperature offset must be taken into
account when using the processor thermal diode to implement power management
events. This offset is different than the diode Toffset value programmed into the
processor Model Specific Register (MSR).
Table 18, Table 19, Table 20, and Table 21 provide the diode interface and
specifications. Two different sets of diode parameters are listed in Table 19 and
Table 20. The Diode Model parameters (Table 19) apply to traditional thermal sensors
that use the Diode Equation to determine the processor temperature. Transistor Model
parameters (Table 20) have been added to support thermal sensors that use the
transistor equation method. The Transistor Model may provide more accurate
temperature measurements when the diode ideality factor is closer to the maximum or
minimum limits. Please contact your external thermal sensor supplier for their
recommendation. This thermal diode is separate from the Intel Thermal Monitor's
thermal sensor and cannot be used to predict the behavior of the Intel Thermal Monitor.
Table 18. Thermal Diode Interface
Signal Name Pin/Ball Number Signal Description
THERMDA A24 Thermal diode anode

THERMDC A25 Thermal diode cathode
64 Datasheet
Table 19. Thermal Diode Parameters using Diode Mode
IFW Forward Bias Current 5 - 200 A 1

n Diode Ideality Factor 1.000 1.009 1.050 - 2, 3, 4
RT Series Resistance 2.79 4.52 6.24 2, 3, 5
NOTES:
1. Intel does not support or recommend operation of the thermal diode under reverse bias.
Intel does not support or recommend operation of the thermal diode when the processor
power supplies are not within their specified tolerance range.
2. Characterized across a temperature range of 50 - 100C.
3. Not 100% tested. Specified by design characterization.
4. The ideality factor, n, represents the deviation from ideal diode behavior as exemplified by
the diode equation:
IFW = IS * (e qVD/nkT 1)
where IS = saturation current, q = electronic charge, VD = voltage across the diode, k =
Boltzmann Constant, and T = absolute temperature (Kelvin).
5. The series resistance, RT, is provided to allow for a more accurate measurement of the
junction temperature. RT, as defined, includes the lands of the processor but does not
include any socket resistance or board trace resistance between the socket and the
external remote diode thermal sensor. RT can be used by remote diode thermal sensors
with automatic series resistance cancellation to calibrate out this error term. Another
application is that a temperature offset can be manually calculated and programmed into
an offset register in the remote diode thermal sensors as exemplified by the equation:
Terror = [RT * (N-1) * IFWmin] / [nk/q * ln N]
where Terror = sensor temperature error, N = sensor current ratio, k = Boltzmann Constant,
q = electronic charge.
Table 20. Thermal Diode Parameters using Transistor Mode
IFW Forward Bias Current 5 - 200 A 1, 2

IE Emitter Current 5 200 A
nQ Transistor Ideality 0.997 1.001 1.005 - 3, 4, 5
Beta 0.3 0.760 3, 4
RT Series Resistance 2.79 4.52 6.24 3, 6
NOTES:
1. Intel does not support or recommend operation of the thermal diode under reverse bias.
2. Same as IFW in Table 18.
3. Characterized across a temperature range of 50 - 100 C.
4. Not 100% tested. Specified by design characterization.
5. The ideality factor, nQ, represents the deviation from ideal transistor model behavior as
exemplified by the equation for the collector current:
IC = IS * (e qVBE/nQkT 1)
Where IS = saturation current, q = electronic charge, VBE = voltage across the transistor
base emitter junction (same nodes as VD), k = Boltzmann Constant, and T = absolute
temperature (Kelvin).
6. The series resistance, RT, provided in the Diode Model Table (Table 19) can be used for
more accurate readings as needed.
Datasheet 65
When calculating a temperature based on thermal diode measurements, a number of

parameters must be either measured or assumed. Most devices measure the diode
ideality and assume a series resistance and ideality trim value, although some are
capable of also measuring the series resistance. Calculating the temperature is then
accomplished using the equations listed under Table 18. In most temperature sensing
devices, an expected value for the diode ideality is designed-in to the temperature
calculation equation. If the designer of the temperature sensing device assumes a
perfect diode the ideality value (also called ntrim) will be 1.000. Given that most diodes
are not perfect, the designers usually select an ntrim value that more closely matches
the behavior of the diodes in the processor. If the processors diode ideality deviates
from that of ntrim, each calculated temperature will be offset by a fixed amount. This
temperature offset can be calculated with the equation:
Terror(nf) = Tmeasured X (1 - nactual/ntrim)

Where Terror(nf) is the offset in degrees C, Tmeasured is in Kelvin, nactual is the measured
ideality of the diode, and ntrim is the diode ideality assumed by the temperature
sensing device.
5.1.2 Thermal Diode Offset

In order to improve the accuracy of diode based temperature measurements, a
temperature offset value (specified as Toffset) will be programmed into a processor
Model Specific Register (MSR) which will contain thermal diode characterization data.
During manufacturing each processors thermal diode will be evaluated for its behavior
relative to a theoretical diode. Using the equation above, the temperature error created
by the difference between ntrim and the actual ideality of the particular processor will
be calculated.
If the ntrim value used to calculate Toffset differs from the ntrim value used in a
temperature sensing device, the Terror(nf) may not be accurate. If desired, the Toffset
can be adjusted by calculating nactual and then recalculating the offset using the actual
ntrim as defined in the temperature sensor manufacturers' datasheet.
The ntrim used to calculate the Diode Correction Toffset are listed in Table 21.
Table 21. Thermal Diode ntrim and Diode Correction Toffset
Symbol Parameter Unit
ntrim Diode ideality used to calculate Toffset 1.01
66 Datasheet
5.1.3 Intel Thermal Monitor

The Intel Thermal Monitor helps control the processor temperature by activating the
TCC (Thermal Control Circuit) when the processor silicon reaches its maximum
operating temperature. The temperature at which the Intel Thermal Monitor activates
the TCC is not user configurable. Bus traffic is snooped in the normal manner, and
interrupt requests are latched (and serviced during the time that the clocks are on)
while the TCC is active.
With a properly designed and characterized thermal solution, it is anticipated that the
TCC would only be activated for very short periods of time when running the most
power intensive applications. The processor performance impact due to these brief
periods of TCC activation is expected to be minor and hence not detectable. An under-
designed thermal solution that is not able to prevent excessive activation of the TCC in
the anticipated ambient environment may cause a noticeable performance loss, and
may affect the long-term reliability of the processor. In addition, a thermal solution that
is significantly under designed may not be capable of cooling the processor even when
the TCC is active continuously.
The Intel Thermal Monitor controls the processor temperature by modulating (starting
and stopping) the processor core clocks or by initiating an Enhanced Intel SpeedStep
Technology transition when the processor silicon reaches its maximum operating
temperature. The Intel Thermal Monitor uses two modes to activate the TCC:
Automatic mode and on-demand mode. If both modes are activated, Automatic mode
takes precedence.
Note: The Intel Thermal Monitor automatic mode must be enabled through BIOS for the
processor to be operating within specifications.
There are two automatic modes called Intel Thermal Monitor 1 (TM1) and Intel Thermal
Monitor 2 (TM2). These modes are selected by writing values to the Model Specific
Registers (MSRs) of the processor. After Automatic mode is enabled, the TCC will
activate only when the internal die temperature reaches the maximum allowed value
for operation.
Likewise, when Intel Thermal Monitor 2 is enabled, and a high temperature situation
exists, the processor will perform an Enhanced Intel SpeedStep technology transition to
a lower operating point. When the processor temperature drops below the critical level,
the processor will make an Enhanced Intel SpeedStep technology transition to the last
requested operating point.
TM1 and TM2 can co-exist within the processor. If both TM1 and TM2 bits are enabled in
the auto-throttle MSR, TM2 will take precedence over TM1. However, if TM2 is not
sufficient to cool the processor below the maximum operating temperature then TM1
will also activate to help cool down the processor. Intel recommends Thermal Monitor 1
and Thermal Monitor 2 be enabled on the Intel Pentium Dual-Core processor.
If a processor load based Enhanced Intel SpeedStep technology transition (through

MSR write) is initiated when an Intel Thermal Monitor 2 period is active, there are two
possible results:
1. If the processor load based Enhanced Intel SpeedStep technology transition target
frequency is higher than the Intel Thermal Monitor 2 transition based target
frequency, the processor load-based transition will be deferred until the Intel
Thermal Monitor 2 event has been completed.
2. If the processor load-based Enhanced Intel SpeedStep technology transition target
frequency is lower than the Intel Thermal Monitor 2 transition based target
frequency, the processor will transition to the processor load-based Enhanced Intel
SpeedStep technology target frequency point.
Datasheet 67
When Intel Thermal Monitor 1 is enabled while a high temperature situation exists, the
clocks will be modulated by alternately turning the clocks off and on at a 50% duty
cycle. Cycle times are processor speed dependent and will decrease linearly as
processor core frequencies increase. Once the temperature has returned to a non-
critical level, modulation ceases and TCC goes inactive. A small amount of hysteresis
has been included to prevent rapid active/inactive transitions of the TCC when the
processor temperature is near the trip point. The duty cycle is factory configured and
cannot be modified. Also, automatic mode does not require any additional hardware,
software drivers, or interrupt handling routines. Processor performance will be
decreased by the same amount as the duty cycle when the TCC is active.
The TCC may also be activated via on-demand mode. If bit 4 of the ACPI Intel Thermal
Monitor control register is written to a 1, the TCC will be activated immediately,
independent of the processor temperature. When using on-demand mode to activate
the TCC, the duty cycle of the clock modulation is programmable via bits 3:1 of the
same ACPI Intel Thermal Monitor control register. In automatic mode, the duty cycle is
fixed at 50% on, 50% off, however in on-demand mode, the duty cycle can be
programmed from 12.5% on/ 87.5% off, to 87.5% on/12.5% off in 12.5% increments.
On-demand mode may be used at the same time automatic mode is enabled, however,
if the system tries to enable the TCC via on-demand mode at the same time automatic
mode is enabled and a high temperature condition exists, automatic mode will take
precedence.
An external signal, PROCHOT# (processor hot) is asserted when the processor detects
that its temperature is above the thermal trip point. Bus snooping and interrupt
latching are also active while the TCC is active.
Besides the thermal sensor and thermal control circuit, the Intel Thermal Monitor also
includes one ACPI register, one performance counter register, three Model Specific
Registers (MSR), and one I/O pin (PROCHOT#). All are available to monitor and control
the state of the Intel Thermal Monitor feature. The Intel Thermal Monitor can be
configured to generate an interrupt upon the assertion or deassertion of PROCHOT#.
Note: PROCHOT# will not be asserted when the processor is in the Stop Grant, Sleep and
Deep Sleep low power states (internal clocks stopped), hence the thermal diode
reading must be used as a safeguard to maintain the processor junction temperature
within maximum specification. If the platform thermal solution is not able to maintain
the processor junction temperature within the maximum specification, the system must
initiate an orderly shutdown to prevent damage. If the processor enters one of the
above low power states with PROCHOT# already asserted, PROCHOT# will remain
asserted until the processor exits the low power state and the processor junction
temperature drops below the thermal trip point.
If Thermal Monitor automatic mode is disabled, the processor will be operating out of
specification. Regardless of enabling the automatic or on-demand modes, in the event
of a catastrophic cooling failure, the processor will automatically shut down when the
silicon has reached a temperature of approximately 125C. At this point the
THERMTRIP# signal will go active. THERMTRIP# activation is independent of processor
activity and does not generate any bus cycles. When THERMTRIP# is asserted, the
processor core voltage must be shut down within the time specified in Chapter 3.
5.1.4 Digital Thermal Sensor

The Intel Pentium Dual-Core processor also contains an on die digital thermal sensor
that can be read via a MSR (no I/O interface). In a dual core implementation of the
processor, each core will have a unique digital thermal sensor whose temperature is
accessible via processor MSR. The digital thermal sensor is the preferred method of
reading the processor die temperature since it can be located much closer to the
hottest portions of the die and can thus more accurately track the die temperature and
68 Datasheet
potential activation of processor core clock modulation via the Thermal Monitor. The
digital thermal sensor is only valid while the processor is in the normal operating state
(C0 state).
Unlike traditional thermal devices, the Digital Thermal sensor will output a temperature
relative to the maximum supported operating temperature of the processor (TJ,MAX). It
is the responsibility of software to convert the relative temperature to an absolute
temperature. The temperature returned by the digital thermal sensor will always be at
or below TJ,MAX. Over temperature conditions are detectable via an Out Of Spec status
bit. This bit is also part of the Digital Thermal sensor MSR. When this bit is set, the
processor is operating out of specification and immediate shutdown of the system
should occur. The processor operation and code execution is not guaranteed once the
activation of the Out of Spec status bit is set.
The Digital Thermal Sensor (DTS) relative temperature readout corresponds to the
Intel Thermal Monitor (TM1/TM2) trigger point. When the DTS indicates maximum
processor core temperature has been reached the TM1 or TM2 hardware thermal
control mechanism will activate. The DTS and TM1/TM2 temperature may not
correspond to the thermal diode reading since the thermal diode is located in a
separate portion of the die and thermal gradient between the individual core DTS.
Additionally, the thermal gradient from DTS to thermal diode can vary substantially due
to changes in processor power, mechanical and thermal attach and software
application. The system designer is required to use the DTS to guarantee proper
operation of the processor within its temperature operating specifications.
Changes to the temperature can be detected via two programmable thresholds located
in the processor MSRs. These thresholds have the capability of generating interrupts
via the core's local APIC. Refer to the Intel Architecture Software Developer's Manual
for specific register and programming details
5.1.5 Out of Specification Detection

Overheat detection is performed by monitoring the processor temperature and
temperature gradient. This feature is intended for graceful shut down before the
THERMTRIP# is activated. If the processors TM1 or TM2 are triggered and the
temperature remains high, an Out Of Spec status and sticky bit are latched in the
status MSR register and generates thermal interrupt. PROCHOT# Signal Pin.
An external signal, PROCHOT# (processor hot), is asserted when the processor die
temperature has reached its maximum operating temperature. If the Intel Thermal
Monitor 1 or Intel Thermal Monitor 2 is enabled (note that the Thermal Monitor 1 or
Thermal Monitor 2 must be enabled for the processor to be operating within
specification), the TCC will be active when PROCHOT# is asserted. The processor can
be configured to generate an interrupt upon the assertion or deassertion of
PROCHOT#.
The processor implement a bi-directional PROCHOT# capability to allow system designs

to protect various components from over-temperature situations. The PROCHOT#
signal is bi-directional in that it can either signal when the processor has reached its
maximum operating temperature or be driven from an external source to activate the
TCC. The ability to activate the TCC via PROCHOT# can provide a means for thermal
protection of system components.
In a dual-core implementation, only a single PROCHOT# pin exists at a package level.

When either core's thermal sensor trips, PROCHOT# signal will be driven by the
processor package. If only TM1 is enabled, PROCHOT# will be asserted and only the
core that is above TCC temperature trip point will have its core clocks modulated. If
TM2 is enabled, then regardless of which core(s) are above TCC temperature trip point,
both cores will enter the lowest programmed TM2 performance state.
Datasheet 69
Note: Intel recommends both Intel Thermal Monitors be enabled.
When PROCHOT# is driven by an external agent, if only TM1 is enabled on both cores,
then both processor cores will have their core clocks modulated. If TM2 is enabled on
both cores, then both processor core will enter the lowest programmed TM2
performance state.
One application is the thermal protection of voltage regulators (VR). System designers
can create a circuit to monitor the VR temperature and activate the TCC when the
temperature limit of the VR is reached. By asserting PROCHOT# (pulled-low) and
activating the TCC, the VR can cool down as a result of reduced processor power
consumption. Bi-directional PROCHOT# can allow VR thermal designs to target
maximum sustained current instead of maximum current. Systems should still provide
proper cooling for the VR, and rely on bi-directional PROCHOT# only as a backup in
case of system cooling failure. The system thermal design should allow the power
delivery circuitry to operate within its temperature specification even while the
processor is operating at its TDP. With a properly designed and characterized thermal
solution, it is anticipated that bi-directional PROCHOT# would only be asserted for very
short periods of time when running the most power intensive applications. An under-
designed thermal solution that is not able to prevent excessive assertion of PROCHOT#
in the anticipated ambient environment may cause a noticeable performance loss.
70 Datasheet

Intel Pentium Dual-Core Mobile Processor

Uploaded by

Copyright:

Available Formats

Intel Pentium Dual-Core Mobile Processor

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Intel Pentium Dual-Core Mobile Processor

Uploaded by

Copyright:

Available Formats

Intel Pentium Dual-Core Mobile

316519 001 Initial release February 2007

A # symbol after a signal name refers to an active low signal, indicating a

Intel Pentium Dual-Core Processor on 65-nm Technology

2 Low Power Features

Table 2. Coordination of Core-Level Low Power States at the Package Level

Dual Core: Core1 State

C0 Normal Normal Normal Normal Normal

C11 Normal Normal Normal Normal Normal

C2 Stop Grant Normal Normal Stop Grant Stop Grant

C3 Deep Sleep Normal Normal Stop Grant Deep Sleep

Figure 1. Package-Level Low Power States

STPCLK# asserted SLP# asserted DPSLP# asserted

Figure 2. Core Low Power States

MWAIT(C1) Halt break

2.1.1 Core Low-Power States

2.1.1.2 C1/AutoHALT Powerdown State

2.1.1.3 C1/MWAIT Powerdown State

2.1.1.4 Core C2 State

2.1.1.5 Core C3 State

2.1.2 Package Low Power States

2.1.2.1 Normal State

2.1.2.2 Stop-Grant State

2.1.2.3 Stop Grant Snoop State

2.1.2.4 Sleep State

In the Sleep state, the processor is incapable of responding to snoop transactions or

2.1.2.5 Deep Sleep State

While in Deep Sleep state, the processor is incapable of responding to snoop

2.2 Enhanced Intel SpeedStep Technology

2.3 FSB Low Power Enhancements

2.4 Processor Power Status Indicator (PSI#) Signal

3.2 FSB Clock (BCLK[1:0]) and Processor Clocking

3.3 Voltage Identification

Table 3. Voltage Identification Definition (Sheet 1 of 4)

VID6 VID5 VID4 VID3 VID2 VID1 VID0 VCC (V)

Table 3. Voltage Identification Definition (Sheet 2 of 4)

VID6 VID5 VID4 VID3 VID2 VID1 VID0 VCC (V)

Table 3. Voltage Identification Definition (Sheet 3 of 4)

VID6 VID5 VID4 VID3 VID2 VID1 VID0 VCC (V)

Table 3. Voltage Identification Definition (Sheet 4 of 4)

VID6 VID5 VID4 VID3 VID2 VID1 VID0 VCC (V)

3.4 Catastrophic Thermal Protection

3.5 Signal Terminations and Unused Pins

For reliable operation, always connect unused inputs or bidirectional signals to an

3.6 FSB Frequency Select Signals (BSEL[2:0])

Table 4. BSEL[2:0] Encoding for BCLK Frequency

BSEL[2] BSEL[1] BSEL[0] BCLK Frequency

3.7 FSB Signal Groups

Table 5. FSB Pin Groups

Signal Group Type Signals1

AGTL+ Common Clock Synchronous BPRI#, DEFER#, DPWR#, PREQ#, RESET#,

Signals Associated Strobe

3.8 CMOS Signals

3.9 Maximum Ratings

At conditions exceeding absolute maximum and minimum ratings, neither functionality

Table 6. Processor DC Absolute Maximum Ratings

Symbol Parameter Min Max Unit Notes

TSTORAGE Processor storage temperature -40 85 C 2

3.10 Processor DC Specifications

Table 7. Voltage and Current Specifications for Standard Voltage Processor

&/0 1 00