This document calculates the volume of a stockpile that is 435m long, 50m wide, and 8m high with a 35 degree repose angle and 0.8 tonnes/m^3 density. It finds the length and width at the base to be 27.15m and 412.15m. It then calculates the volumes of the triangular, trapezoidal, and conical sections, finding the total volume to be 1,307,636.85m^3 and total weight as 1,046,111.08 tonnes.
This document calculates the volume of a stockpile that is 435m long, 50m wide, and 8m high with a 35 degree repose angle and 0.8 tonnes/m^3 density. It finds the length and width at the base to be 27.15m and 412.15m. It then calculates the volumes of the triangular, trapezoidal, and conical sections, finding the total volume to be 1,307,636.85m^3 and total weight as 1,046,111.08 tonnes.
This document calculates the volume of a stockpile that is 435m long, 50m wide, and 8m high with a 35 degree repose angle and 0.8 tonnes/m^3 density. It finds the length and width at the base to be 27.15m and 412.15m. It then calculates the volumes of the triangular, trapezoidal, and conical sections, finding the total volume to be 1,307,636.85m^3 and total weight as 1,046,111.08 tonnes.
This document calculates the volume of a stockpile that is 435m long, 50m wide, and 8m high with a 35 degree repose angle and 0.8 tonnes/m^3 density. It finds the length and width at the base to be 27.15m and 412.15m. It then calculates the volumes of the triangular, trapezoidal, and conical sections, finding the total volume to be 1,307,636.85m^3 and total weight as 1,046,111.08 tonnes.
Download as XLS, PDF, TXT or read online from Scribd
Download as xls, pdf, or txt
You are on page 1/ 5
STOCK PILE CALCULATION
Total Length of Stockpile L= 435 m
Total width of pile B= 50 m Height of Stockpile h= 8 m Repose angle of coal u = 35 deg. Density of material u = 0.8 T/m3
Calculation:
Length a= height / tan u
a= 11.43 m
Length b= Base Width - 2*a
b= 27.15 m
Length c= Length - 2*a
c= 412.15 m
1) Calculation for Vol. of Portion A
Where A= A1 + A2 + A3 + A4
Since total vol. is cone
Vol. V1 = u *a2*h / 3
V1 = 1093.57 m3 2) Calculation for Vol. of Portion B
Where B= B1 + B2
Vol. V2 = (1/2 * base * ht)*length
V2 = (1/2*a*h)*b
V2 = 1240.76
Since it is a 2 nos. of Triangular
V2 = 2481.52 m3
3) Calculation for Vol. of Portion C
Since it is a Trapazodial section
Vol. V3 = [(B + b)/2]*h*c
V3 = 127188.77 m3
So, Total Volume of Stockpile
V= V1 + V2 + V3
V= 130763.85 m3
Total Capacity (for one stockpile only)
W= Volume x density
W= 104611.08 T
BMCR = 653.3 TPH
No of Units 2 coal stock for 15 days 376300.8 Tonnes witth 80 % PLF No of stockpile 3.597 Length of stockpile (L) meter 80 Width of stockpile (B) meter 32 Angle of repose () degree 35 35-37 degree for coal / limestone Density of material () kg/m3 800
Storage quantity Ton 5802
Height of stockpile (H) meter 7 Should not be in excess of 10 m, adjust width Width of stockpile (W1) meter 435 Length of stockpile (L1) meter 50 Angle of repose () degree 35 35-37 degree for coal / limestone Density of material () kg/m3 800 Height of stockpile (H) meter 8 should not be more than 8m when dozers are u
