Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 38 views

    Description: Polypropylene 3281

    Uploaded by

    ChivuAlexandru
    Polypropylene 3281 is a homopolymer with low melt flow that is well-suited for sheet extrusion, strapping, and in-line thermoforming applications. It has high melt strength allowing for uniform draw down and maximum line speeds during processing. The polymer also has excellent process stability, producing consistent properties even with regrind use. Additionally, the material complies with FDA regulations and can be used for food contact applications. It is recommended where high melt strength and extrusion speeds are required.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Description: Polypropylene 3281

    Uploaded by

    ChivuAlexandru
    38 views1 page
    Polypropylene 3281 is a homopolymer with low melt flow that is well-suited for sheet extrusion, strapping, and in-line thermoforming applications. It has high melt strength allowing for uniform draw down and maximum line speeds during processing. The polymer also has excellent process stability, producing consistent properties even with regrind use. Additionally, the material complies with FDA regulations and can be used for food contact applications. It is recommended where high melt strength and extrusion speeds are required.

    Original Description:

    datasheet

    Original Title

    8

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Polypropylene 3281 is a homopolymer with low melt flow that is well-suited for sheet extrusion, strapping, and in-line thermoforming applications. It has high melt strength allowing for uniform draw down and maximum line speeds during processing. The polymer also has excellent process stability, producing consistent properties even with regrind use. Additionally, the material complies with FDA regulations and can be used for food contact applications. It is recommended where high melt strength and extrusion speeds are required.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    38 views1 page

    Description: Polypropylene 3281

    Uploaded by

    ChivuAlexandru
    Polypropylene 3281 is a homopolymer with low melt flow that is well-suited for sheet extrusion, strapping, and in-line thermoforming applications. It has high melt strength allowing for uniform draw down and maximum line speeds during processing. The polymer also has excellent process stability, producing consistent properties even with regrind use. Additionally, the material complies with FDA regulations and can be used for food contact applications. It is recommended where high melt strength and extrusion speeds are required.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Polypropylene 3281

    Technical Data Sheet


    Homopolymer Low Melt Flow for Sheet Extrusion, Strapping, and In-Line
    Thermoforming Applications
    Produced in the United States

    Description

    Polypropylene 3281: The high melt strength of TOTAL Polypropylene 3281 allows uniform draw down during
    processing, resulting in maximum line speeds and a good balance of physical properties.
    Process Stability: Excellent polymer stability of TOTAL 3281 produces consistent product properties during extrusion,
    even with the use of regrind.
    FDA: 3281 complies with all applicable FDA regulations and may be used under these provisions for food contact
    applications.
    Applications: 3281 is recommended for sheet and strapping applications where high melt strength and high extrusion
    speeds are required.

    Polypropylene
    Processing: 3281 resin processes on conventional extrusion equipment with typical melt temperatures of 390-450oF
    (200-232oC).

    Characteristics
    Method Unit Typical Value

    Rheological Properties
    D-1238
    Melt Flow g/10 min 1.25
    Condition L
    Mechanical Properties
    Tensile @ Yield D-638 psi (MPa) 4,900 (34.0)
    Elongation D-638 % 8
    Tensile Modulus D-638 psi (MPa) 220,000 (1,515)
    Flexural Modulus D-790 psi (MPa) 200,000 (1,380)
    Izod Impact @ 73oF D-256A ft.-lbs/in. (J/m)
    Notched 0.8 (42.0)
    Unnotched 30.0 (1,590)
    Hardness
    Shore D D-1706 81
    Rockwell R D-785A 90
    Thermal Properties(1)
    Melting Point DSC(2) oF (oC) 330 (165)
    oF
    @ 66 psi 220
    Heat Deflection D-648
    C @ 4.64 kg/cm2 104
    Coefficient of Linear Thermal Expansion in./in./oF x 10-5 5.6
    D-696
    cm/cm/oC x 10-5 10
    Other Physical Properties
    Density D-1505 g/cc 0.905

    (1) Data developed under laboratory conditions and are not to be used as specification, maxima or minima.
    (2) MP determined with a DSC-2 Differential Scanning Calorimeter. Test procedure available upon request. 3281 9/2014

    TOTAL PETROCHEMICALS & REFINING USA, INC.


    TECHNICAL CENTER
    POLYMERS AMERICAS
    P.O. Box 1200
    www.totalrefiningchemicals.com
    Deer Park, Texas 77536
    1201 Louisiana Street
    Phone: 281-884-7500
    1-800-344-3462
    Suite 1800
    Houston, TX 77002

    All tests were run under laboratory conditions. ASTM (where applicable) testing procedures. The data are intended as a general guide only and do not necessarily represent results that may be obtained elsewhere. The use of TOTAL products must be
    guided by the users own methods for selection of proper formulation. TOTAL PETROCHEMICALS & REFINING USA, INC. disclaims any responsibility for misuse or misapplication of its products. TOTAL MAKES NO WARRANTY OF
    MERCHANTABILITY AND THERE IS NO WARRANTY THAT GOODS SUPPLIED SHALL BE FIT FOR ANY PARTICULAR PURPOSE. TOTALS liability and customers exclusive remedy for any claims arising out of sales of its products are expressly
    limited at customer option to replacement of non-performing goods or payment not to exceed the purchase price plus transportation charges thereon in respect to any material which damage is claimed.

    You might also like