Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
377 views

Instrumentation and Control

This document outlines the syllabus for the Instrumentation and Control subject for the Mechatronics Engineering program. The subject is worth 4 credits and involves 1 lecture period per week. It introduces fundamental process control concepts, including elements of a process control loop. The syllabus covers transmitters, actuators, controllers, tuning controllers, and programmable logic controllers. The objectives are to teach process controller design, transmitter selection, and enhancing knowledge of different controllers. On completing the subject, learners will be able to select transmitters and actuators, design controllers for various processes, and write ladder logic programs for industrial applications.

Uploaded by

Krista Jackson
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
377 views

Instrumentation and Control

This document outlines the syllabus for the Instrumentation and Control subject for the Mechatronics Engineering program. The subject is worth 4 credits and involves 1 lecture period per week. It introduces fundamental process control concepts, including elements of a process control loop. The syllabus covers transmitters, actuators, controllers, tuning controllers, and programmable logic controllers. The objectives are to teach process controller design, transmitter selection, and enhancing knowledge of different controllers. On completing the subject, learners will be able to select transmitters and actuators, design controllers for various processes, and write ladder logic programs for industrial applications.

Uploaded by

Krista Jackson
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

CLASS: TE (Mechatronics) Subject Code: MTC605 Semester:-VI

SUBJECT: Instrumentation and Control Credit-4


Periods per week: 1Period of Lecture 4
60 min. Tutorial --
Hours Marks
Evaluation System Theory Examination 3 80
Internal Assessment 20
TOTAL 100
Pre-requisite:
1. MTC504 Control Systems
2. MTC503 Sensors and Actuators

Objectives:
1. To teach fundamental Process controller and its design
2. To educate students the criteria for selection of suitable transmitters (Sensor/Actuators)
3. To help students in enhancing their knowledge about different controllers

Outcomes: Learner will be able to...


1. Select proper transmitter for different parameters
2. Use suitable actuators for different situations
3. Design controller for different processes and applications
4. Write the ladder diagram programs for in industrial application.

Module Topics Hrs.


1. 0 Fundamentals of process and control 08
1.1 Elements of process control loop, Concept of Process variables, set point,
controlled variable, manipulated variable, load variable. Representation of
Process loop components using standard symbols (basics with reference to
control loop), and Examples of process loops like temperature, flow, level,
pressure etc. Current to pneumatic converter & Pressure to Current converter.
1.2 Process Characteristics: Process load, Process lag, Self Regulation,
Distance/velocity lag (dead time), Capacity.
Control System Parameters Error, Variable Range, Control Lag, Cycling,
Direct/Reverse Action.
2.0 Transmitters: 08
2.1 Need of transmitter (concept of field area & control room area), Need for
standardization of signals, Current, voltage, and pneumatic signal standards,
Concept of live & dead zero
2.2 Types of transmitters: Two and four wire transmitters, Electronic and
Pneumatic transmitters Electronic Differential Pressure Transmitter
3.0 Actuators 10
3.1 Control valve :Necessity, comparison with other final control elements,
Control valve Characteristics (Inherent & Installed) Control valve terminology:
Range ability, Turndown, valve capacity, viscosity index, AO, AC (Fail Safe
Action) etc. Classification of control valve based on: valve body. Construction,
type of actuation, application etc. Construction, Advantages, Disadvantages &
applications of Globe: Single, double, 3way, angle, Gate, Needle, Diaphragm,
Rotary valves, Ball, Butterfly.
3.2 Types of actuators: Construction, Advantages, Disadvantages & applications:
Spring Diaphragm & Smart actuators. Control valve accessories: Positioners:

University of Mumbai, Mechatronics Engineering (Second, Third and Final Year) New Course (N-2015)
Applications/Need, Types, Effect on performance of Control valves. Volume
boosters, Pressure boosters, Reversing relay, Solenoid valves, Air lock, Position
indicating switches, Electro pneumatic converter, Hand wheel, Motors.
4.0 Controller 08
4.1 Discontinuous: ON/OFF, Multi-position Control, Floating Control.
4.2 Continuous: Proportional (offset), Integral (Reset windup), Derivative,
Proportional- Integral, Proportional- Derivative, Proportional- Integral-
derivative, Anti-reset windup, Rate before Reset, Concept of Bump less
transfers in PID controller, Effect of process characteristics on PID
combination, Selection & application of controller actions.
5.0 Tuning of controller: 08
5.1 Different Criteria: Quarter Amplitude Decay Ratio, Loop disturbance,
Optimum Control, Measure of Quality, Stability Criteria Tuning Methods:
Process Reaction Curve (open loop), Ziegler Nichols (closed loop),&
Frequency Response Method.
5.2 Digital PID controllers : : Velocity & Position algorithm, Block Schematic,
Faceplate of Digital controller, Direct Digital Control. Continuous versus
Discrete Process Control, Relay based ladder diagram using standard symbols,
Limitations of relay based system.
6.0 Programmable Logic Controller (PLC) 10
6.1 Architecture of PLC, Types of Input & Output modules (AI, DI, DO, AO),
Wiring diagram,
6.2 PLC Basic instructions, Timers & Counters, PLC ladder diagram, PLC
programming for process applications,
6.3 Interfacing pneumatic & Hydraulic systems to PLC, Fixed & Modular PLC
(Rack, slot, grouping), PLC specifications, PLC manufacturers,
52
Internal Assessment:
Assessment consists of two tests out of which; one should be compulsory class test (on minimum 40%
of curriculum) and the other is either a class test (on minimum 70% of curriculum) or assignment on
live problems or course project.
Theory examinations:
1. Question paper will comprise of 6 questions, each carrying 20 marks.
2. Question number 1 will be compulsory and based on maximum contents of the syllabus
3. Remaining questions will be mixed in nature (for example, if Q.2 has part (a) from module 3
then part (b) will be from other than module 3)
4. Total four questions need to be solved.
In question paper weightage of each module will be proportional to number of respective
lecture hours as mention in the syllabus.
References:
1. Process control and Instrument technology, C.D.Johnson, TMH
2. Instrumentation for Process measurement and control , N.A. Anderson, CRC Press
3. Introduction to Programmable Logic Controller, Gary Dunning, DELMAR Cengage
Learning.
4. Programmable Logic Controller, Webb, PHI Reference Books
5. Tuning of Industrial control systems, ISA
6. Control valve Handbook, ISA
7. Process Instruments and Controls Handbook, Douglas M. Considine, McGraw-Hill.
8. Process Control, Instrument Engineering Hand book, B.G. Liptak, Butterworth-Heinemann
Ltd
9. Programmable Logic Controller, NIIT
10. Fundamentals of Process Control Theory, Paul Murrill, ISA
11. Lessons in Industrial Instrumentation, By Tony R. Kuphaldt, Version 0.4 Released Jan
11, 2009.

University of Mumbai, Mechatronics Engineering (Second, Third and Final Year) New Course (N-2015)

You might also like