4 Way Hacksaw Machine

DESIGN AND FABRICATION OF FOUR WAY
HACKSAW MACHINE
ABSTRACT
Objective of the project is to fabricate a motorized high speed 4-way

hacksaw machine and to automate and to modify the conventional power hacksaw
machine in order to achieve high productivity of work-pieces than the power
hacksaw machine using cam mechanism. The operator need not measure the length
of the work-piece that is to be cut and to load and unload the work-piece from the
vice each time after a piece has been cut. This machine is built with the 4 hacksaw
machines such that tall the machines are operated simultaneously with the help of a
motor and cam mechanism.
INTRODUCTION
In present condition many electrically operated power hacksaw machines of

different companies with different specifications are available for the use in shop
floor. These machines are so precise that they can cut metal bars with minimum
time made up of different materials but they have one and major disadvantage that
those are able to cut single piece of bar at a time. For industries to achieve the mass
production, it is necessary to cut metal bars with high rate. So it is impossible to
depend upon conventional single frame power hacksaw machines and need the
improvement in technology and design of such machines. With the help of this
multi-way power hacksaw machine the four metal bars can be cut simultaneously
to get high speed cutting rate and to achieve mass production for maximum profit
in related companies. As this machine overcomes all the limitations and drawbacks
of conventional hacksaw machines, it is also helpful for small scale industries due
to its simple working and operating conditions along with its compatibility,
efficiency and affordable price.
This project is about cutting the wood, metal, pipe, angle, channel, flat
plates, rods and such other things. This project is very much useful and easy to
install by user.
1.1 Scotch Yoke Mechanism

Scotch yoke is a mechanism for converting the linear motion of a slider into
rotational motion or vice-versa. The piston or other reciprocating part is directly
coupled to a sliding yoke with a slot that engages a pin on the rotating part. The
shape of the motion of the piston is a pure sine wave over time given a
constant rotational speed.
Fig 1.1 Sectional view of Scotch yoke mechanism
1.2 Construction
The scotch yoke mechanism is constructed with iron bars. Here the crank is
made in some length and the yoke is also made using the same material. It is noted
that the minimum length of the yoke should be double the length of the crank. The
crank and yoke is connected with a pin. Iron bars are welded to both sides of the
yoke to get the reciprocating motion. The yoke with the iron bars is fixed on the
display board with the help of c clamp. Now the crank is welded to the end of the
shaft of the motor. Now the pin on the crank is connected to the yoke. The pin used
to connect yoke and crank is a bolt.
Fig 1.2 Front view of Scotch Yoke Mechanism
1.3 Working principle
When the power is supplied to the 12v Dc motor, shaft and crank attached to
the shaft start rotating. As the crank rotates the pin slides inside the yoke and also
moves the yoke forward. When the crank rotates the forward direction. The
maximum displacement will be equal to the length of the crank. When the crank
completes the next of rotation the yoke comes back to its initial position. For the
next of rotation, yoke moves in the backward direction. When the crank completes
a full rotation the yoke moves back to the initial position. For a complete rotation
of crank the yoke moves through a length equal to double the length of the crank.
The displacement of the yoke can be controlled by varying the length of the crank.
1.4 Motivation
When we searching for our project in market we show the demand of
hacksaw blade is considerably increasing day by day with the growth of
industrialization, engineering sector, real estate, automobile sector etc.
It is used in almost every sector for cutting of materials like angle, channel,
flat plates, rods and such other things. It is also required in auto repairing shops,
general repairing workshops, fitting shops, welding shops and technical institutes.
Govt. department like Railway, Defense, PWD, Postal & Telegraph and others are
one of the main users of it.
In India large nos. of small enterprises are engaged in its manufacturing. By

considering its demand, new production unit has great prospect. So from that we
have concluded that the future base hacksaw machine is use for very costly
machinery and in locomotives.
User can use this project in small industry, which cannot afford costly machinery.
2. Working Principles of 4 Way Hacksaw Machine
4 way hacksaw machine is work on principle of SCOTCH YOKE MECHANISM in this

rotary motion of shaft is to be convert into the reciprocating motion of hacksaw frame.
Working principle of hacksaw machine is very simple. First of all the hacksaw machine
is put on ground and after that whatever metal, wood, pvc, is cut is fixed on vice at required
length, after that the electric motor is connect with electricity.
Now start the electric motor so due to that the shaft of motor and hollow disc will be
rotate and also rotate the eccentric Centre and link connect to it.
Due to rotation of links the hacksaw frame will be reciprocate on the metal and cutting of
metal is done.
4.2 Assembly of 4 Way Hacksaw Machine

For assembly of 4 way hacksaw machine first of all on base plate electric motor is mount
vertically, hollow disc having internal circle radius is same as the radius of shaft of motor is fit
on shaft and also the disc have eccentric centre, metal bar is weld at the eccentric centre.
The links one end is connect with the end of hacksaw frame and second end is connect
with the metal bar of eccentric centre.
The buckle type elements are connect at the end of hacksaw frame and link is connect in
this buckle, pipe provide support to the hacksaw frame, the pipe is connect to the base. Vice is
also fit on pipe and which also connect with the base.
2D - LINE DIAGRAM
ADVANTAGES
Weight of machine is less.

It reduce the work of labor.
Easy to make because of simple construction.
High production rate.
Cost is less.
Easy maintenance and maintenance cost is less.
It resist all atmospheric effects.
DISADVANTAGES
Time consume more.

Speed variation is required for cutting the different metal.
APPLICATIONS
In engineering industry.
In construction industry.
In Workshop.

4 Way Hacksaw Machine

Uploaded by

Copyright:

Available Formats

4 Way Hacksaw Machine

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

4 Way Hacksaw Machine

Uploaded by

Copyright:

Available Formats

What is the working principle of the 4-way hacksaw machine?

What are the main components of the 4-way hacksaw machine?

DESIGN AND FABRICATION OF FOUR WAY

Objective of the project is to fabricate a motorized high speed 4-way

In present condition many electrically operated power hacksaw machines of

1.1 Scotch Yoke Mechanism

Fig 1.1 Sectional view of Scotch yoke mechanism

In India large nos. of small enterprises are engaged in its manufacturing. By

2. Working Principles of 4 Way Hacksaw Machine

4 way hacksaw machine is work on principle of SCOTCH YOKE MECHANISM in this

4.2 Assembly of 4 Way Hacksaw Machine

Weight of machine is less.

Time consume more.

You might also like