Rotaclip Planos

RCEG-12 Rotaclip Assembly Drawings
15.1 Main Assemblies

RC12-18 RC12-18 Main Assembly
GS15-300 GS15-300 Main Assembly
15.2 Installation & Spare Parts Kits

55-0254 Kit, Install Rotaclip 100T
55-0237 RC Clipper Bearing Replacement Kit
55-0250 Spare Parts Kit T1209RC Clipper
55-0251 Spare Parts Kit Z2209RC Clipper
55-0252 Spare Parts Kit GS15-300 Glue Seal Assembly
55-0253 Spare Parts Kit RC12-18 Rotary Table Assembly
55-0269 Spare Parts Kit CTC Splicer (Optional)
55-0273 Spare Parts Kit Rotaclip
15.3 Clippers
T1209RC T1209RC Clipper Assembly
00-2893 T1209RC RH Clip Pusher Assembly
00-2894 T1209RC LH Clip Pusher Assembly
00-2895 T1209RC Die Support Assembly
00-2896 T1209RC Spool Mount Assembly
00-2897 T1209RC Punch Cylinder Assembly
00-3565 T1209RC Spool Mount Assembly (TTt) (Technopack Clip Spools)
08-0165 T1209RC RH Gathering Plate Assembly
08-0167 T1209RC LH Gathering Plate Assembly
57-0785 Drive Arm Assembly (T1209RC)
Z2209RC Z2209RC Clipper Assembly

00-2880 Z2209RC RH Clip Pusher Assembly
00-2881 Z2209RC LH Clip Pusher Assembly
00-2882 Z2209RC Die Support Assembly
00-2891 Z2209RC Spool Mount Assembly
00-2892 Z2209RC Punch Cylinder Assembly
08-0159 Z2209RC RH Gathering Plate Assembly
08-0162 Z2209RC LH Gathering Plate Assembly
15.4 Pneumatic, Electrical & Controls

00-2902 GS300 Controller Rail Assembly
00-2903 GS300 VFD Assembly
00-2909 GS+FC Operator Interface Assembly
00-2910 Upper Din Rail Assembly
00-2911 Lower Din Rail Assembly
00-2946 GS3 Electrical Junction Box Assembly
00-2956 Main Air Shutoff Piping Assembly
21-0492 Gate Cylinder Manifold Assembly
73-0107 Operator Interface Assembly
73-0108 GS15-300 Electrical Box Assembly
73-0109 GS300 Electrical Panel Assembly
73-0115 Rota-Clip Pneumatic Box Assembly
15.5 RC12-18 Assemblies
00-2929 Center Column Housing Assembly
00-2930 Center Column Spindle Assembly
00-2931 Clipper Reset Cam Arm Assembly
00-2932 Clipper Fire Cam Arm Assembly
00-2933 RC12-18 Table Assembly
00-2935 Clipper Trigger Valve Assembly
00-2947 RC12-18 Column & Base Plate Assembly
00-2953 Air Motor Assembly Table Drive
00-2954 RC12-18 FRL Assembly
00-2961 1/4 Precision Regulator Assembly
07-0337 Rotary Table Frame Assembly
15.6 GS15-300 Assemblies

00-1422 Pneumatic Vacuum Generator Assembly
00-2862 Web Guide Assembly (2 sheets)
00-2864 Forming Shoulder Support Assembly
00-2875 Web Guide Adjuster Assembly
00-2876 Horn Mount Assembly
00-2904 Glue Nozzle Position Assembly
00-2905 Glue Nozzle Assembly
00-2906 Waste Pan Assembly
00-2913 GS15-300 Frame Assembly
00-2914 32MM Diameter GS3 Sizing Tooling Assembly
00-2937 Vacuum Manifold Assembly
00-2939 Vacuum Belt Drive Rear
00-2940 Vacuum Belt Drive Front
00-2941 Film Drive Assembly GS15-300
00-2950 Glue Seal Extruder Assembly
00-2955 Extruder Exit Assembly
00-2957 Transition Tray Assembly
00-3422 Seal Cooler Assembly
00-3466 Glue Seal Cooler Assembly
00-3073 Glue Seal Extruder Assembly [Alternate assembly for lower voltage applications]
15.7 Schematics
63-0173 Pneumatic Schematic
63-0174 Electrical Schematic
15.1
Main
Assemblies
7 6 5 4 3 2 1
8
ITEM PART ITEM PART NOTES:
QTY DESCRIPTION QTY DESCRIPTION
NO. NUMBER NO. NUMBER
1) GREASE BOTH BEARINGS IN THE CENTER COLUMN WITH A MULTIPURPOSE
1 1 00-2931 CLIPPER RESET CAM ARM ASM 107 1 99-0976 LETTER - 1.5 VINYL #6 HIGH-PERFORMANCE LITHIUM GREASE TIPPER TIE PART 24-0140. WHEN
2 1 00-2932 CLIPPER FIRE CAM ARM ASM 108 1 99-0977 LETTER - 1.5 VINYL #7 GREASING THE BEARINGS REMOVE THE CENTER COLUMN VENT PLUG
3 1 00-2933 RC12-18 TABLE ASSEMBLY 109 1 99-0978 LETTER - 1.5 VINYL #8 LOCATED APPROXIMATELY 4 INCHES ABOVE THE LOWER GREASE FITTING.
4 12 00-2935 CLIPPER TRIGGER VALVE ASM 110 1 99-0979 LETTER - 1.5 VINYL #9
5 1 00-2953 AIRMOTOR ASSY - TABLE DRIVE 111 1 99-0980 LETTER - 1.5 VINYL #0 2) STAMP NUMBERS 1 THRU 12 ON THE EDGE OF THE PIE PANS IN 1/4" NUMBERS.
6 1 00-2954 RC12-18 FRL ASSEMBLY 112 2 99-1183 6MM ID FLAT WASHER SST 2 PER STATION START WITH #1 TO THE LEFT AND RIGHT OF STATION #1 IN THE OUTER EDGE OF THE
7 1 00-2960 CABLE CARRIER ASSY - RC TABLE 113 38 99-1184 8MM ID FLAT WASHER SST PIE PAN AND CONTINUE TO THE LEFT INCREASING ONE NUMBER EACH TIME.
92 THE PIE PAN TO THE LEFT OF STATION #1 SHOULD BE STATION #2
8 2 01-1079 FRAME CLAMP MTG BLOCK 114 4 99-1184 8MM ID FLAT WASHER SST AND THE PIE PANS TO THE LEFT AND RIGHT WILL BE STAMPED #2. THESE PAN
9 1 01-1134 COVER SUPPORT BLOCK 115 184 99-1186 12MM ID FLAT WASHER SST IDENTIFICATION NUMBERS WILL BE USED TO ORIENT THE PANS CORRECTLY
10 1 07-0336 MOUNT WELDMENT - CHAIN GUARD 116 2 99-1245 6MM ID LOCKWASHER SST 12 WHEN REINSTALLED ON THE MACHINE AFTER SHIPMENT.
11 1 07-0348 AIR PREP MOUNT 117 32 99-1246 8MM ID LOCKWASHER SST 2 2
12 1 09-1082 GUARD TABLE DRIVE CHAIN 118 40 99-1248 12MM ID LOCKWASHER SST 3 3) USE THE STATION ALIGNMENT TOOL (99-0873) AND CLIPPER SPACING
13 4 09-1083 SPROCKET SHIELD 119 2 99-9606 1/4 FLAT WASHER SST GAUGE (99-0865) TO PROPERLY SPACE AND CENTER THE CLIPPER BARS
D 14 1 09-1088 GUARD - AIRMOTOR 120 4 99-9611 3/8 LOCK WASHER SST WHEN INSTALLING THE BARS. D
15 11 10-4595 CLIPPER MOUNT 18" PRODUCT CLIPPER 3
STATION #1 4) REQUIRED AIR HOSES FOR THIS MACHINE:
16 24 10-4596 CLIPPER LOCATOR BAR 4 A) 28-0899 1-1/2" X 53" LG (AIR PREP TO PNEUMATIC BOX)
1
17 1 10-4597 GREASE PIPE STRAP B) 28-0900 1-1/2" X 110" LG (AIR PREP TO MAIN SHUT OFF ON GS3)
18 1 10-4600 BRACKET - CHAIN GUARD END 12 C) 28-0901 1" X 29" LG (FRL TO PNEUMATIC BOX - 2 REQ.)
19 1 10-4601 BRACKET CHAIN GUARD D) 28-0902 1" X 89" LG (FRL TO CENTER COLUMN - 2 REQ.)
20 1 10-4602 ACTUATOR BRACKET
21 2 10-4604 CLIPPER CAM ARM CLAMP 4
22 1 10-4610 CLIPPER MOUNT 18" PRODUCT - REG
23 1 10-4645 BRACKET - OIL NOZZLE
24 1 10-4660 MOUNT PLATE - CABLE CARRIER 5
25 2 10-4877 FRAME CLAMP ADJ BRACKET
26 1 10-5002 BRACKET - CHAIN GUARD LH SUPPORT
27 1 10-5003 BRACKET - CHAIN GUARD RH SUPPORT
28 12 16-0844 STANDOFF-13 MM HEX 30 X M8 STUD/TAP SST
29 1 16-0861 SPACER-.38 RCT 3.50 X 2.75 SST
30 1 18-0361 SPROCKET SUPPORT DISC
31 1 24-0116 SINGLE PT PNUEMATIC LUBRICATOR
32 1 24-0118 SMC AM850-N14D OIL MIST 5
11
33 1 24-0119 SMC AF810-N14 AIR FILTER
34 1 24-0120 SMC AMG850-N14D WATER SEPARATOR
35 1 24-0143 PUNCH REG. ASM.
36 1 25-0150 MOTOR-2HP 230/460V 1800 RPM 60 HZ 3 PH 10
37 1 28-0112 1 X 5 1/2 NIPPLE SST 6
38 1 28-0115 1 X 90 DEG ELBOW SST
39 13 28-0300 PLFTG-UNION TEE 6MM 10 6
11 C
C 40 1 28-0303 PLFTG-MALE CONN 4MM-1/8BSPT
41 12 28-0467 PLFTG-MALE RUN TEE 12MM-1/4BSPT
42 1 28-0492 1/8 HEX COUPLING SST 9 7
43 12 28-0561 PLFTG-MALE CONN 12MM-1/4BSPT 9
44 12 28-0632 PLFTG-PLUG-IN RED 6MM-12MM 7
45 1 28-0652 3/4 X 90 DEG ELBOW SST
46 1 28-0679 1/8 NPT-GREASE FITTING 90 DEG SHORT 8 8 SEE NOTE #4-B
47 1 28-0884 1-1/2 NPT CLOSE NIPPLE SST
48 1 28-0885 1-1/2 NPT X 90 DEG STREET ELBOW SST ADD PIE PAN #1-12
49 1 28-0888 1-1/2 X 45 DEG ELBOW SST SEE NOTE #2 SEE NOTE #4-A
50 1 28-0890 1-1/2 NPT X 3 PIPE NIPPLE SST
52 1 28-0896 3/4 X 1 HEX NIPPLE REDUCER SST
ADD STATION #1-12
53 1 28-0897 1 X 3/4 BUSHING SST (P/N 99-0971 THRU 99-0980)
54 2 28-0915 1-1/2 NPT SWIVEL STEEL SEE NOTE #4-C
55 2 28-0916 1 NPT SWIVEL STEEL
56 12 28-0920 PLTFG-UNION BALL VALVE 5/32
57 12 28-0925 PLFTG-UNION ELBOW 4MM
58 1 28-9531 1/8 STREET ELBOW SST
59 72 29-0206 M12 ELASTIC LOCKNUT SST SEE NOTE #4-C
60 4 29-0236 M12 X 90 MM LG HH SST DIN 931
61 6 29-0506 M3 X 8 MM LG FH SST
62 2 29-0666 M6 X 8 MM LG HH SST DIN 933
63 4 29-0674 M6 X 35 MM LG HH SST DIN 933
64 2 29-0675 M6 X 40 MM LG HH SST DIN 933
65 4 29-0684 M8 X 12 MM LG HH SST DIN 933
66 40 29-0687 M8 X 16 MM LG HH SST DIN 933
67 12 29-0688 M8 X 20 MM LG HH SST DIN 933
B 68 2 29-0689 M8 X 25 HEX HEAD SST DIN 933
69 2 29-0690 M8 X 30 MM LG HH SST DIN 933 B
70 10 29-0693 M8 X 45 MM LG HH SST DIN 933
71 4 29-0705 M10 X 20 MM LG HH SST DIN 933
72 8 29-0716 M12 X 25 MM LG HH SST DIN 933
73 4 29-0718 M12 X 30 MM LG HH SST DIN 933
74 8 29-0720 M12 X 40 MM LG HH SST DIN 933
75 25 29-0721 M12 X 45 MM LG HH SST DIN 933
76 2 29-0722 M12 X 50 MM LG HH SST DIN 933
77 4 29-0724 M12 X 60 MM LG HH SST DIN 933
78 72 29-0726 M12 X 70 MM LG HH SST DIN 933
79 2 29-0876 M4 X 40 MM LG SH SST
80 12 29-1009 M6 X 20MM LG SETSCREW CUPPT SST
81 2 29-1128 M6 HEX NUT SST
82 6 29-1129 M8 HEX NUT SST
83 5 29-1135 M12 HEX NUT SST
84 6 29-1172 M8 ACORN CAP NUT SST DIN 1587
85 1 29-1338 PIPE-1/8NPT X 12 SST
86 2 29-9403 1/4-20 X 1-1/2 LG HH SST
87 4 29-9479 3/8-16 X 7/8 LG HH SST
88 1 30-1167 SENSOR-LASER DISTANCE
89 12 32-2616 CLIPPER RETAINER PLATE 3
90 2 32-2722 FRAME CLAMP PLATE
91 1 32-2842 ACTUATOR COVER SEE NOTE #4-D SEE NOTE #4-A
92 24 39-0084 DETENT PIN,CL-4-DEP-1.0-S
93 12 39-0411 PIN-12MM DOWEL 30MM - M6
94 1 57-0301 60 PITCH NICKEL PLATED CHAIN
95 1 57-0788 ROTACLIP COLUMN SPROCKET A
A 96 1 57-0790 3/4 PITCH #60 SPROCKET 40T
97 1 57-5508 WINSMITH REDUCER 935MDVS4200BK
98 1 73-0115 ROTA-CLIP PNEUMATIC BOX ASSEMBLY
99 1 75-0017 24" MANUAL LINEAR ACUATOR
SW
100 4 99-0865 CLIPPER SPACING GAUGE
101 1 99-0873 STATION ALIGNMENT TOOL 04 SEE ECN RC12-18-04 04/20/09 ST CHECKED BY DATE
102
103
5
2
99-0971
99-0972
LETTER - 1.5 VINYL #1
LETTER - 1.5 VINYL #2
03 SEE ECN RC12-18-03 03/31/09 ST TM
S. GRIGGS 11/16/07 RC12-18 ASSEMBLY
104 1 99-0973 LETTER - 1.5 VINYL #3
06 SEE ECN RC12-18-06 09/10/10 CDS 02 SEE ECN RC12-18-02 12/30/08 SDG R APPROVED BY DATE
S. GRIGGS 11/16/07
05 SEE ECN RC12-18-05 06-11-09 SDG 01 SEE ECN RC12-18-01 JEH
RC12-18-06
07/29/08 SIZE PART NO.
105 1 99-0974 LETTER - 1.5 VINYL #4 A DOVER INDUSTRIES COMPANY
106 1 99-0975 LETTER - 1.5 VINYL #5 NO. ZONE DESCRIPTION DATE APPROVED NO. ZONE DESCRIPTION DATE APPROVED DRAWN BY DATE RELEASED BY DATE
J. HITE 9/18/07 J. HITE 11/16/07 1 5

REVISIONS SCALE 1:5 D0 NOT SCALE
DRAWING SHEET of
This drawing (or print) is the property of Tipper Tie, Apex NC and shall not be traced, photographed, photocopied
or reproduced in any manner nor used for any purpose whatsoever except by written permision of Tipper Tie.
7 6 5 4 3 2 1
8
ITEM PART ITEM PART
NO. NUMBER NO. NUMBER 43
1 1 00-2931 CLIPPER RESET CAM ARM ASM 106 1 99-0975 LETTER - 1.5 VINYL #5
2 1 00-2932 CLIPPER FIRE CAM ARM ASM 41 12 PLC'S
107 1 99-0976 LETTER - 1.5 VINYL #6
3 1 00-2933 RC12-18 TABLE ASSEMBLY 108 1 99-0977 LETTER - 1.5 VINYL #7 44
5 1 00-2953 AIRMOTOR ASSY - TABLE DRIVE 110 1 99-0979 LETTER - 1.5 VINYL #9
6 1 00-2954 RC12-18 FRL ASSEMBLY 111 1 99-0980 LETTER - 1.5 VINYL #0
7 1 00-2960 CABLE CARRIER ASSY - RC TABLE 112 2 99-1183 6MM ID FLAT WASHER SST
8 2 01-1079 FRAME CLAMP MTG BLOCK 57
113 38 99-1184 8MM ID FLAT WASHER SST
9 1 01-1134 COVER SUPPORT BLOCK 114 4 99-1184 8MM ID FLAT WASHER SST 12 PLC'S
10 1 07-0336 MOUNT WELDMENT - CHAIN GUARD 115 184 99-1186 12MM ID FLAT WASHER SST
11 1 07-0348 AIR PREP MOUNT 116 2 99-1245 6MM ID LOCKWASHER SST
12 1 09-1082 GUARD TABLE DRIVE CHAIN 117 32 99-1246 8MM ID LOCKWASHER SST
13 4 09-1083 SPROCKET SHIELD 118 40 99-1248 12MM ID LOCKWASHER SST
D 14 1 09-1088 GUARD - AIRMOTOR D
119 2 99-9606 1/4 FLAT WASHER SST
15 11 10-4595 CLIPPER MOUNT 18" PRODUCT 120 4 99-9611 3/8 LOCK WASHER SST
16 24 10-4596 CLIPPER LOCATOR BAR
17 1 10-4597 GREASE PIPE STRAP
39
18 1 10-4600 BRACKET - CHAIN GUARD END
19 1 10-4601 BRACKET CHAIN GUARD 13 PLC'S
21 2 10-4604 CLIPPER CAM ARM CLAMP
24 1 10-4660 MOUNT PLATE - CABLE CARRIER
56 12 PLC'S
29 1 16-0861 SPACER-.38 RCT 3.50 X 2.75 SST
30 1 18-0361 SPROCKET SUPPORT DISC 84 6 PLC'S
32 1 24-0118 SMC AM850-N14D OIL MIST
34 1 24-0120 SMC AMG850-N14D WATER SEPARATOR 13 4 PLC'S
35 1 24-0143 PUNCH REG. ASM.
36 1 25-0150 MOTOR-2HP 230/460V 1800 RPM 60 HZ 3 PH
37 1 28-0112 1 X 5 1/2 NIPPLE SST
95
38 1 28-0115 1 X 90 DEG ELBOW SST
39 13 28-0300 PLFTG-UNION TEE 6MM
40 1 28-0303 PLFTG-MALE CONN 4MM-1/8BSPT C
C SPROCKET CONTAINS 2 HOLES ALONG
41 12 28-0467 PLFTG-MALE RUN TEE 12MM-1/4BSPT SPLIT. USE 1/2" PIN TO ALIGN HALVES
42 1 28-0492 1/8 HEX COUPLING SST DURING ASSEMBLY.
43 12 28-0561 PLFTG-MALE CONN 12MM-1/4BSPT
44 12 28-0632 PLFTG-PLUG-IN RED 6MM-12MM COUNTER SINK SIDE IS UP
45 1 28-0652 3/4 X 90 DEG ELBOW SST
46 1 28-0679 1/8 NPT-GREASE FITTING 90 DEG SHORT
47 1 28-0884 1-1/2 NPT CLOSE NIPPLE SST 28 12 PLC'S
48 1 28-0885 1-1/2 NPT X 90 DEG STREET ELBOW SST
49 1 28-0888 1-1/2 X 45 DEG ELBOW SST SPIN SPROCKET RELATIVE TO OUTER COLUMN BEFORE MOUNTING IT, SO
12 PLC'S 67 THE TRIGGER VALVES UNDERNEATH BECOME INLINE WITH A CLIPPER.
53 1 28-0897 1 X 3/4 BUSHING SST
54 2 28-0915 1-1/2 NPT SWIVEL STEEL
55 2 28-0916 1 NPT SWIVEL STEEL 8 PLC'S 74
57 12 28-0925 PLFTG-UNION ELBOW 4MM COUNTER SINK SIDE IS DOWN 30
58 1 28-9531 1/8 STREET ELBOW SST 12 PLC'S
59 72 29-0206 M12 ELASTIC LOCKNUT SST
60 4 29-0236 M12 X 90 MM LG HH SST DIN 931
61 6 29-0506 M3 X 8 MM LG FH SST
62 2 29-0666 M6 X 8 MM LG HH SST DIN 933
63 4 29-0674 M6 X 35 MM LG HH SST DIN 933
64 2 29-0675 M6 X 40 MM LG HH SST DIN 933
65 4 29-0684 M8 X 12 MM LG HH SST DIN 933
66 40 29-0687 M8 X 16 MM LG HH SST DIN 933 66
6 PLC'S 2
67 12 29-0688 M8 X 20 MM LG HH SST DIN 933
B 68 2 29-0689 M8 X 25 HEX HEAD SST DIN 933 12 PLC'S
69 2 29-0690 M8 X 30 MM LG HH SST DIN 933 4 B
70 10 29-0693 M8 X 45 MM LG HH SST DIN 933
71 4 29-0705 M10 X 20 MM LG HH SST DIN 933
72 8 29-0716 M12 X 25 MM LG HH SST DIN 933
73 4 29-0718 M12 X 30 MM LG HH SST DIN 933
74 8 29-0720 M12 X 40 MM LG HH SST DIN 933
75 25 29-0721 M12 X 45 MM LG HH SST DIN 933
76 2 29-0722 M12 X 50 MM LG HH SST DIN 933
77 4 29-0724 M12 X 60 MM LG HH SST DIN 933
78 72 29-0726 M12 X 70 MM LG HH SST DIN 933 70
79 2 29-0876 M4 X 40 MM LG SH SST
80 12 29-1009 M6 X 20MM LG SETSCREW CUPPT SST 4 PLC'S 117
81 2 29-1128 M6 HEX NUT SST
82 6 29-1129 M8 HEX NUT SST 114
83 5 29-1135 M12 HEX NUT SST
84 6 29-1172 M8 ACORN CAP NUT SST DIN 1587 21
85 1 29-1338 PIPE-1/8NPT X 12 SST 2 PLC'S
86 2 29-9403 1/4-20 X 1-1/2 LG HH SST
87 4 29-9479 3/8-16 X 7/8 LG HH SST
89 12 32-2616 CLIPPER RETAINER PLATE
91 1 32-2842 ACTUATOR COVER
93 12 39-0411 PIN-12MM DOWEL 30MM - M6
94 1 57-0301 60 PITCH NICKEL PLATED CHAIN 1
SW
CHECKED BY DATE
101 1 99-0873 STATION ALIGNMENT TOOL
102 5 99-0971 LETTER - 1.5 VINYL #1 S. GRIGGS 11/16/07 RC12-18 ASSEMBLY
103 2 99-0972 LETTER - 1.5 VINYL #2
TM
R APPROVED BY DATE
104 1 99-0973 LETTER - 1.5 VINYL #3 76 75 20 83 S. GRIGGS 11/16/07
RC12-18-06
SIZE PART NO.
DRAWN BY DATE RELEASED BY DATE
J. HITE 9/18/07 J. HITE 11/16/07 2 5

SCALE 1:5 D0 NOT SCALE
DRAWING SHEET of
7 6 5 4 3 2 1
8
ITEM PART ITEM PART
2 1 00-2932 CLIPPER FIRE CAM ARM ASM 107 1 99-0976 LETTER - 1.5 VINYL #6
3 1 00-2933 RC12-18 TABLE ASSEMBLY 108 1 99-0977 LETTER - 1.5 VINYL #7
8 2 01-1079 FRAME CLAMP MTG BLOCK 113 38 99-1184 8MM ID FLAT WASHER SST
9 1 01-1134 COVER SUPPORT BLOCK 114 4 99-1184 8MM ID FLAT WASHER SST
11 1 07-0348 AIR PREP MOUNT 116 2 99-1245 6MM ID LOCKWASHER SST 58
13 4 09-1083 SPROCKET SHIELD 118 40 99-1248 12MM ID LOCKWASHER SST 3
D 14 1 09-1088 GUARD - AIRMOTOR 119 2 99-9606 1/4 FLAT WASHER SST D
85
19 1 10-4601 BRACKET CHAIN GUARD
20 1 10-4602 ACTUATOR BRACKET 17
21 2 10-4604 CLIPPER CAM ARM CLAMP 97 96 91 66
42
27 1 10-5003 BRACKET - CHAIN GUARD RH SUPPORT 46
29 1 16-0861 SPACER-.38 RCT 3.50 X 2.75 SST
32 1 24-0118 SMC AM850-N14D OIL MIST 94
34 1 24-0120 SMC AMG850-N14D WATER SEPARATOR 63
35 1 24-0143 PUNCH REG. ASM.
37 1 28-0112 1 X 5 1/2 NIPPLE SST 9
38 1 28-0115 1 X 90 DEG ELBOW SST
40 1 28-0303 PLFTG-MALE CONN 4MM-1/8BSPT 31 C
C
42 1 28-0492 1/8 HEX COUPLING SST
44 12 28-0632 PLFTG-PLUG-IN RED 6MM-12MM
45 1 28-0652 3/4 X 90 DEG ELBOW SST
49 1 28-0888 1-1/2 X 45 DEG ELBOW SST
51 1 28-0891 1-1/2 NPT X 4 PIPE NIPPLE SST 120 87
53 1 28-0897 1 X 3/4 BUSHING SST
60 4 29-0236 M12 X 90 MM LG HH SST DIN 931
61 6 29-0506 M3 X 8 MM LG FH SST
62 2 29-0666 M6 X 8 MM LG HH SST DIN 933 40
63 4 29-0674 M6 X 35 MM LG HH SST DIN 933
64 2 29-0675 M6 X 40 MM LG HH SST DIN 933
65 4 29-0684 M8 X 12 MM LG HH SST DIN 933 63
66 40 29-0687 M8 X 16 MM LG HH SST DIN 933
67 12 29-0688 M8 X 20 MM LG HH SST DIN 933
119
69 2 29-0690 M8 X 30 MM LG HH SST DIN 933 B
70 10 29-0693 M8 X 45 MM LG HH SST DIN 933
71 4 29-0705 M10 X 20 MM LG HH SST DIN 933
72 8 29-0716 M12 X 25 MM LG HH SST DIN 933 86
73 4 29-0718 M12 X 30 MM LG HH SST DIN 933
74 8 29-0720 M12 X 40 MM LG HH SST DIN 933
75 25 29-0721 M12 X 45 MM LG HH SST DIN 933
76 2 29-0722 M12 X 50 MM LG HH SST DIN 933 29
77 4 29-0724 M12 X 60 MM LG HH SST DIN 933
78 72 29-0726 M12 X 70 MM LG HH SST DIN 933
79 2 29-0876 M4 X 40 MM LG SH SST
80 12 29-1009 M6 X 20MM LG SETSCREW CUPPT SST 88
81 2 29-1128 M6 HEX NUT SST
82 6 29-1129 M8 HEX NUT SST 83 118 115 77 61 24
83 5 29-1135 M12 HEX NUT SST 4 PLACES 3 PLC'S 79
84 6 29-1172 M8 ACORN CAP NUT SST DIN 1587 BOTH ENDS
85 1 29-1338 PIPE-1/8NPT X 12 SST 2 PLACES
86 2 29-9403 1/4-20 X 1-1/2 LG HH SST
87 4 29-9479 3/8-16 X 7/8 LG HH SST
7
91 1 32-2842 ACTUATOR COVER
93 12 39-0411 PIN-12MM DOWEL 30MM - M6 5
99
3
SW
CHECKED BY DATE
103 2 99-0972 LETTER - 1.5 VINYL #2
TM
R APPROVED BY DATE
104 1 99-0973 LETTER - 1.5 VINYL #3 S. GRIGGS 11/16/07
RC12-18-06
SIZE PART NO.

2 PLACES
J. HITE 9/18/07 J. HITE 11/16/07 3 5
DRAWING SHEET of
7 6 5 4 3 2 1
8
ITEM PART ITEM PART
11 1 07-0348 AIR PREP MOUNT 116 2 99-1245 6MM ID LOCKWASHER SST CHAIN OILER NOZZLE
12 1 09-1082 GUARD TABLE DRIVE CHAIN 117 32 99-1246 8MM ID LOCKWASHER SST ATTACHES HERE
13 4 09-1083 SPROCKET SHIELD 118 40 99-1248 12MM ID LOCKWASHER SST 12
29 1 16-0861 SPACER-.38 RCT 3.50 X 2.75 SST 62
30 1 18-0361 SPROCKET SUPPORT DISC SET SCREW HEX FACING OUT 23
31 1 24-0116 SINGLE PT PNUEMATIC LUBRICATOR RED LOCTITE SET SCREW TO PIN
32 1 24-0118 SMC AM850-N14D OIL MIST BLUE LOCTITE SET SCREW TO COLUMN
33 1 24-0119 SMC AF810-N14 AIR FILTER 4 PLC'S 12 PLC'S
34 1 24-0120 SMC AMG850-N14D WATER SEPARATOR 100 93 80
35 1 24-0143 PUNCH REG. ASM. 2 PLC'S
37 1 28-0112 1 X 5 1/2 NIPPLE SST 66
113
38 1 28-0115 1 X 90 DEG ELBOW SST
C
42 1 28-0492 1/8 HEX COUPLING SST 19
45 1 28-0652 3/4 X 90 DEG ELBOW SST
24 PLC'S
47 1 28-0884 1-1/2 NPT CLOSE NIPPLE SST 68
48 1 28-0885 1-1/2 NPT X 90 DEG STREET ELBOW SST 16
49 1 28-0888 1-1/2 X 45 DEG ELBOW SST 117 2 PLC'S
51 1 28-0891 1-1/2 NPT X 4 PIPE NIPPLE SST 113
53 1 28-0897 1 X 3/4 BUSHING SST
58 1 28-9531 1/8 STREET ELBOW SST 26
60 4 29-0236 M12 X 90 MM LG HH SST DIN 931
61 6 29-0506 M3 X 8 MM LG FH SST
62 2 29-0666 M6 X 8 MM LG HH SST DIN 933 64 10
11 PLC'S 15
63 4 29-0674 M6 X 35 MM LG HH SST DIN 933
64 2 29-0675 M6 X 40 MM LG HH SST DIN 933 35
65 4 29-0684 M8 X 12 MM LG HH SST DIN 933
66 40 29-0687 M8 X 16 MM LG HH SST DIN 933
78 115 70 117 113 82
67 12 29-0688 M8 X 20 MM LG HH SST DIN 933
B 68 2 29-0689 M8 X 25 HEX HEAD SST DIN 933 72 PLC'S
115 2 PLACES
69 2 29-0690 M8 X 30 MM LG HH SST DIN 933 118 66 113 18 B
70 10 29-0693 M8 X 45 MM LG HH SST DIN 933
71 4 29-0705 M10 X 20 MM LG HH SST DIN 933 66 2 PLC'S
72 8 29-0716 M12 X 25 MM LG HH SST DIN 933 24 PLC'S 117 75
73 4 29-0718 M12 X 30 MM LG HH SST DIN 933
74 8 29-0720 M12 X 40 MM LG HH SST DIN 933 113
75 25 29-0721 M12 X 45 MM LG HH SST DIN 933
76 2 29-0722 M12 X 50 MM LG HH SST DIN 933 52
77 4 29-0724 M12 X 60 MM LG HH SST DIN 933
78 72 29-0726 M12 X 70 MM LG HH SST DIN 933 70 113 82
79 2 29-0876 M4 X 40 MM LG SH SST 12 PLC'S 89
80 12 29-1009 M6 X 20MM LG SETSCREW CUPPT SST 22 4 PLACES
81 2 29-1128 M6 HEX NUT SST 113
82 6 29-1129 M8 HEX NUT SST 27
115 12
83 5 29-1135 M12 HEX NUT SST
72 PLC'S 55
85 1 29-1338 PIPE-1/8NPT X 12 SST 59 53 SEE NOTE #4-D 66
86 2 29-9403 1/4-20 X 1-1/2 LG HH SST
87 4 29-9479 3/8-16 X 7/8 LG HH SST 112
37 45
89 12 32-2616 CLIPPER RETAINER PLATE 116
91 1 32-2842 ACTUATOR COVER 81
92 24 39-0084 DETENT PIN,CL-4-DEP-1.0-S 38
93 12 39-0411 PIN-12MM DOWEL 30MM - M6
55
99 1 75-0017 24" MANUAL LINEAR ACUATOR SEE NOTE #4-D
SW
CHECKED BY DATE
103 2 99-0972 LETTER - 1.5 VINYL #2
TM
R APPROVED BY DATE
RC12-18-06
SIZE PART NO.
J. HITE 9/18/07 J. HITE 11/16/07 4 5

DRAWING SHEET of
7 6 5 4 3 2 1
8
ITEM PART ITEM PART
11 1 07-0348 AIR PREP MOUNT 116 2 99-1245 6MM ID LOCKWASHER SST
13 4 09-1083 SPROCKET SHIELD 118 40 99-1248 12MM ID LOCKWASHER SST
29 1 16-0861 SPACER-.38 RCT 3.50 X 2.75 SST
11
32 1 24-0118 SMC AM850-N14D OIL MIST
34 1 24-0120 SMC AMG850-N14D WATER SEPARATOR 8 PLACES
35 1 24-0143 PUNCH REG. ASM.
37 1 28-0112 1 X 5 1/2 NIPPLE SST
38 1 28-0115 1 X 90 DEG ELBOW SST 72 118 115 66 4 PLACES
C
42 1 28-0492 1/8 HEX COUPLING SST
43 12 28-0561 PLFTG-MALE CONN 12MM-1/4BSPT 6 14
45 1 28-0652 3/4 X 90 DEG ELBOW SST
46 1 28-0679 1/8 NPT-GREASE FITTING 90 DEG SHORT SEE NOTE #4-D
49 1 28-0888 1-1/2 X 45 DEG ELBOW SST
53 1 28-0897 1 X 3/4 BUSHING SST
60 4 29-0236 M12 X 90 MM LG HH SST DIN 931
61 6 29-0506 M3 X 8 MM LG FH SST
62 2 29-0666 M6 X 8 MM LG HH SST DIN 933
63 4 29-0674 M6 X 35 MM LG HH SST DIN 933
64 2 29-0675 M6 X 40 MM LG HH SST DIN 933
65 4 29-0684 M8 X 12 MM LG HH SST DIN 933
66 40 29-0687 M8 X 16 MM LG HH SST DIN 933
67 12 29-0688 M8 X 20 MM LG HH SST DIN 933
69 2 29-0690 M8 X 30 MM LG HH SST DIN 933 54 B
70 10 29-0693 M8 X 45 MM LG HH SST DIN 933
71 4 29-0705 M10 X 20 MM LG HH SST DIN 933 SEE NOTE #4-B
72 8 29-0716 M12 X 25 MM LG HH SST DIN 933 SEE NOTE #4-C 51
73 4 29-0718 M12 X 30 MM LG HH SST DIN 933
74 8 29-0720 M12 X 40 MM LG HH SST DIN 933 118 73 115 SEE NOTE #4-C
75 25 29-0721 M12 X 45 MM LG HH SST DIN 933 33
76 2 29-0722 M12 X 50 MM LG HH SST DIN 933 4 PLACES
77 4 29-0724 M12 X 60 MM LG HH SST DIN 933 25
32
78 72 29-0726 M12 X 70 MM LG HH SST DIN 933 47
79 2 29-0876 M4 X 40 MM LG SH SST 50
81 2 29-1128 M6 HEX NUT SST
82 6 29-1129 M8 HEX NUT SST
83 5 29-1135 M12 HEX NUT SST 54 49 34
65
84 6 29-1172 M8 ACORN CAP NUT SST DIN 1587 SEE NOTE #4-A
85 1 29-1338 PIPE-1/8NPT X 12 SST 4 PLC'S
86 2 29-9403 1/4-20 X 1-1/2 LG HH SST
87 4 29-9479 3/8-16 X 7/8 LG HH SST
90 2 32-2722 FRAME CLAMP PLATE 98
91 1 32-2842 ACTUATOR COVER 8
92 24 39-0084 DETENT PIN,CL-4-DEP-1.0-S 60 90
93 12 39-0411 PIN-12MM DOWEL 30MM - M6
94 1 57-0301 60 PITCH NICKEL PLATED CHAIN 4 PLC'S
A 96 1 57-0790 3/4 PITCH #60 SPROCKET 40T 71
97 1 57-5508 WINSMITH REDUCER 935MDVS4200BK 4 PLACES
SW
CHECKED BY DATE
103 2 99-0972 LETTER - 1.5 VINYL #2
TM
R APPROVED BY DATE
RC12-18-06
SIZE PART NO.
J. HITE 9/18/07 J. HITE 11/16/07 5 5

DRAWING SHEET of
4 3 2 1
ITEM QTY PART 00-2950 GLUE EXTRUDER ASSY. IS SHOWN

DESCRIPTION 00-3073 GLUE EXTRUDER ASSY. SHOULD BE USED 11
NO. NUMBER
IN ASIAN APPLICATIONS WITH LOWER VOLTAGE
1 1 00-1422 PNEUMATIC VACUUM GENERATOR ASSY
2 1 00-2862 WEB GUIDE ASSEMBLY
8
3 1 00-2864 FORMING COLLAR SUPPORT ASSY
D D
4 1 00-2875 WEB GUIDE ADJUSTER ASSY
5 1 00-2876 GLUE SEAL HORN MNT ASSY 13
14
6 1 00-2905 GLUE NOZZLE ASSEMBLY
7
7 1 00-2906 WASTE PAN ASSEMBLY
8 1 00-2909 GS3 OPERATOR INTERFACE ASSY
9 1 00-2913 GS15-300 FRAME ASSEMBLY
10 1 00-2941 FILM DRIVE ASSY - GS15-300
5
11 1 00-2946 GS3 ELEC. JUNTION BOX ASSY
10
12 1 00-2956 MAIN AIR SHUTOFF PIPING ASM.
13 1 00-2957 TRANSITION TRAY ASSEMBLY C
C 12
14 1 73-0108 GS300 ELECTRICAL BOX ASSEMBLY
6
15 1 99-0571 FILL TUBE ADAPTOR
16 1 99-3904 3" HORN NUT WRENCH
REFERENCE:
1) 00-2962 GLUE SEAL LABELS KIT
2) 55-0252 KIT SPARE PARTS-GS15-300 (OPTIONAL) 9
3) 00-3073 GLUE EXTRUDER ASSY.
4
SHIPPED LOOSE ITEMS: B
99-0937 TEFLON TAPE (2" WIDE x 15FT LONG)
B
2
3 15
16
SW CHECKED BY
T.E.W. 1/7/08
DATE
GS15-300 MAIN ASSEMBLY A

A TM
02 SEE ECN GS15-300-02 03/04/09 ST R

APPROVED BY DATE
01 SEE ECN GS15-300-01 06/11/08 TEW D.MAY 1/7/08 SIZE PART NO.
GS15-300-02+
A DOVER INDUSTRIES COMPANY
NO. ZONE DESCRIPTION DATE APPROVED DRAWN BY DATE RELEASED BY DATE
REVISIONS K.POLING 12/10/07 K.POLING 1/9/08 SCALE

1:10 D0 NOT SCALE
DRAWING SHEET 1 of 2
4 3 2 1
99-0802
99-0892 1 REQ'D
LABEL-240 VOLTS
99-0423 3 REQ'D
LABEL-HAND
SMASH
99-0426 1 REQ'D
D LABEL-ELECTRICAL D
SYMBOL
99-0622 3 REQ'D
99-0622 LABEL-CONSULT
SERVCE MANUAL C
C 99-0432
99-0509 1 REQ'D
LABEL-CAUTION 99-0802 4 REQ'D
BELTS & PULLEYS LABEL-480 VOLTS
99-0032 1 REQ'D
LABEL-DANGER
ELECTRICAL
SHOCK HAZARD
99-0432 B
B
99-0432 3 REQ'D
LABEL-ELECTRICAL
LOCKOUT
(1) 99-0802 VACUUM (ONE ON THE PANEL)
DRIVE MOTOR
(1) ROTARY TABLE MOTOR
SW CHECKED BY
T.E.W. 1/7/08
DATE
GS15-300 MAIN ASSEMBLY A

A TM
APPROVED BY DATE
R
D.MAY 1/7/08 SIZE PART NO.
GS15-300-02+

K.POLING 12/10/07 K.POLING 1/9/08 SCALE
1:10 D0 NOT SCALE
15.2
Spare Parts
Kits
REVISIONS
NO. DESCRIPTION DATE APPROVED NO. DESCRIPTION DATE APPROVED
01 SEE ECN 55-0237-01 06/20/09 SDG
A SUBSTITUTE ITEM SHALL NOT BE USED WITHOUT PRIOR TESTING AND APPROVAL BY ENGINEERING
ITEM PART
QTY DESCRIPTION
NO NUMBER
1 6 38-0494 BEARING-THRUST .500 X 1.000 X .125
2 4 38-0495 BEARING-FLGD .500 X .625 X .375 BRZ
3 2 38-0496 BEARING-SLEEVE .500 X .625 X .375 BRZ
4 1 38-0511 BEARING-SLEEVE .313 X .438 X .250
5 3 38-0571 BUSHING-.500 X .625 X .313 PLASTIC
7 2 38-1265 BEARING-THRUST .500 X 1.000 X .063 BRZ
NAME OF VENDOR VENDOR ADDRESS VENDOR PART NO.

DATE SOURCE CONTROL DRAWING
SW
CHECKED BY
S. GRIGGS 6/24/08
KIT BEARING REPLACEMENT RC CLIPPER
TM
R APPROVED BY DATE
S. GRIGGS 6/24/08 PART NO.
55-0237-01
SIZE
A

J. HITE 6/24/08 J. HITE 6/24/08 SCALE NTS DO NOT SCALE
SHEET 1 of 1
DRAWING
REVISIONS
01 SEE ECN 55-0250-01 01/16/09 CDS
02 SEE ECN 55-0250-02 04/08/09 SDG
03 SEE ECN 55-0250-03 05/19/09 SDG
ITEM PART
QTY DESCRIPTION
NO NUMBER
1 2 04-0133 CYL-.75 X .50 SE
2 1 04-0551 CYL-.563 X .500 DA
3 1 04-0553 CYL-32 X 45 DA
4 2 05-0045 DIE-100T ANGLED CHAMFERED LH
5 1 11-0050 KNIFE BLADE #M-0316
6 2 13-0124 PUNCH-T100 CONCAVE NR 9.480
7 1 17-0087 SPRING-EXTN .38 X 3.00 SST .037
8 6 17-0109 SPRING-COMP .17 X .50, SST .02
9 2 17-0197 SPRING-COMP 10MM X 15MM SST 1.1MM
10 18 19-0078 CLIP PUSHER PAWL (T1209RC)
11 1 21-0164 VALVE-5 PORT 2 POS 3/8 PORTS AIR PILOT
12 1 21-0223 VALVE-1/4 PORTED
13 1 21-0256 PUSH BUTTON FOR VALVE
14 1 21-0257 VALVE-4 WAY SPOOL SR TYPE
15 1 21-5004 SENSOR END OF STROKE 3/8 TO 3/8
16 2 29-1224 RING-RETAIN 16MM SHAFT DIA SST
17 6 39-9493 PIN-.125 DOWEL .750
18 1 55-0217 KIT-SEAL SMC 04-0549 50MM CG1
19 1 55-0218 KIT-SEAL SMC 04-0541 80MM CQ2
20 1 55-0222 KIT-SEAL BIMBA 04-0553 EF
21 3 55-0237 KIT BEARING REPLACEMENT RC CLIPPER
22 2 62-0045 2-014 O-RING .070 X .629 OD
23 1 62-2731 2-017 O-RING .070 X .816 OD
SW TM
CHECKED BY
S. GRIGGS 6/24/08
DATE
KIT-SPARE PARTS T1209RC

R APPROVED BY DATE
S. GRIGGS 6/24/08 SIZE
A
PART NO.
55-0250-03

J. HITE 6/24/08 J. HITE 6/24/08 SCALE 1:1 D0 NOT SCALE
SHEET 1 of 1
DRAWING
REVISIONS
01 SEE ECN 55-0251-01 01/16/09 CDS

02 SEE ECN 55-0251-02 04-14-09 SDG
03 SEE ECN 55-0251-03 5-20-09 SDG
ITEM PART
QTY DESCRIPTION
NO NUMBER
1 2 04-0133 CYL-.75 X .50 SE
2 1 04-0551 CYL-.563 X .500 DA
3 1 04-0553 CYL-32 X 45 DA
4 2 05-0109 DIE-Z200 ANGLED Z2200RC LH
5 1 11-0050 KNIFE BLADE #M-0316
6 6 13-0123 PUNCH-Z200 CONCAVE NR 9.480
7 1 17-0087 SPRING-EXTN .38 X 3.00 SST .037
8 6 17-0109 SPRING-COMP .17 X .50, SST .02
9 2 17-0197 SPRING-COMP 10MM X 15MM SST 1.1MM
10 18 19-0076 CLIP PUSHER PAWL (Z2209RC)
12 1 21-0223 VALVE-1/4 PORTED
15 1 21-4644 VALVE-QEXH 3/8 NPT
17 2 29-1224 RING-RETAIN 16MM SHAFT DIA SST
18 6 39-9493 PIN-.125 DOWEL .750
19 1 55-0217 KIT-SEAL SMC 04-0549 50MM CG1
20 1 55-0222 KIT-SEAL BIMBA 04-0553 EF
21 3 55-0237 KIT BEARING REPLACEMENT RC CLIPPER
22 1 55-0241 KIT-SEAL SMC CQ2B125-PS
23 2 62-0045 2-014 O-RING .070 X .629 OD
24 1 62-2731 2-017 O-RING .070 X .816 OD

SW
CHECKED BY
S. GRIGGS 6/24/08
KIT-SPARE PARTS Z2209RC
TM
R APPROVED BY DATE
55-0251-03
SIZE
A

SHEET 1 of 1
DRAWING
4 3 2 1
ITEM PART
QTY DESCRIPTION
NO NUMBER
1 1 04-0545 SMC RSDQB20-15T 25 2 38-0513 BEARING-BALL-20MM X 42MM X 12MM SST D
D 2 1 04-0546 SMC CDM2E20-25S CYL. 26 4 38-0514 BUSHING-.312x.375x.250 BRZ
3 1 04-0561 CYL-25MM X 100MM SR 27 2 38-0515 BEARING-BALL-15MM X 28MM X 7MM SST
4 1 04-0611 CYL-32 X 25 DA - 8MM PIVOT 28 1 38-0516 BEARING-BALL 20MM SST FLGD PLST
5 1 24-0138 HEATER RELEASE AGENT 29 2 38-0517 BEARING-BALL-20MM X 32MM X 7MM SST
6 2 27-5500 FILTER-REPLACEMENT, VACUUM PUMP 30 1 38-0520 PILLOW BLOCK-20MM PLAIN BRG PLST
7 1 28-0917 MALE STRAIGHT CONN. 3/16 DIA.X 1/8 NPT 31 2 38-0523 BEARING-FLANGE 20MM X 24MM X 20MM BRZ
8 2 29-1341 SMALLEY RING-42MM BORE 32 4 57-0209 ROTA-CLIP VACUUM DRIVE BELT
9 3 29-1342 SNAP RING - 20MM SHAFT 33 2 57-0803 TIMING BELT-H200-75-DBL
10 2 29-1343 E-CLIP FOR 8MM SHAFT 34 1 62-2715 2-210 O-RING .139 X 1.012 OD
11 4 29-1344 SNAP RING-15MM SHAFT 35 1 74-0051 SENSOR, EI1805I020
12 2 30-0863 SWITCH-HALL PNP NO 10/30VDC 36 2 99-0619 6MM X 25MM LONG KEY SST C
C 13 2 30-0870 CLAMP HOLDER-BLACK PLASTIC 37 1 99-0623 6MM X 55MM LONG KEY SST
14 1 30-0938 CONTACTOR-3P DC OPER 1 NO AND 4 NC 38 2 99-0885 EXTRUDER RUPTURE DISC
15 2 30-1058 CONTACTOR-SOLID STATE 600 VAC 20A 39 5 99-0936 GLUE NOZZLE - 2 HOLE
16 1 30-1089 CA-4 WIRE MALE/FEMALE STR .5M
17 2 30-1187 HEATER- 3/8 X 1, 200 WATTS
18 1 30-1188 TEMP PROBE- EXTRUDER PRESSURE TRANS.
19 2 30-1189 TEMP PROBE- GLUE NOZZLE RTD
20 2 30-1256 HEATER-BARREL 460V 650W
21 2 38-0064 WASHER-THRUST .500 X .813 X .094 PLASTIC
22 2 38-0370 BEARING-BALL .500 X 1.125 X SST
23 1 38-0499 FILM SEAL ROLLER BRG B
B 24 1 38-0510 BUSHING- 12MM X 14MM X 15MM LG
04
03
SEE ECN 55-0252-04
SEE ECN 55-0252-03
05/20/09
01/16/09
SDG
CDS
SW CHECKED BY
S. GRIGGS 6/24/08
DATE
KIT-SPARE PARTS GS15-300 A

A TM
02 SEE ECN 55-0252-02 11/20/08 CDS R

APPROVED BY DATE
01 SEE ECN 55-0252-01 09/16/08 ST S. GRIGGS 6/24/08 SIZE PART NO.
55-0252-04
REVISIONS J. HITE 6/24/08 J. HITE 6/24/08 SCALE

1:1 D0 NOT SCALE
REVISIONS
01 SEE ECN 55-0253-01 05/20/09 SDG
ITEM PART
QTY DESCRIPTION
NO NUMBER
1 1 04-0556 CYL-7/16 X 1 DA
2 2 21-0146 VALVE-DBL PUSH BUTTON 3 PORT DETENTED
3 2 21-0541 VALVE-3 PORT 4 POS DUAL NC/NC 24VDC
4 1 24-0104 SMC REGULATOR AR30K-N03-Z
5 1 24-0122 NUT - USE ON 24-0121
6 2 30-0282 SWITCH-PROX PNP 12MM 7MM RANGE
7 1 30-0312 CA-4 WIRE STRAIGHT CONNECTOR
8 1 30-1450 SWITCH-PRESSURE 35/100 PSI
9 1 31-0041 GAUGE-0-60 PSI 1.50 IN 1/8 NPT
10 2 38-0438 WASHER-THRUST-.375 X .156 X .313 PLASTIC
11 1 55-0213 KIT-REPAIR FOR 21-0511
12 1 55-0215 KIT-REPAIR FOR DM2 STATUS INDICATOR
13 1 55-0245 KIT-REPLACE PRIMARY SOLENOID FOR 21-0511
14 1 55-0246 KIT-REPLACE RESET SOLENOID FOR 21-0511
15 1 57-0301 CHAIN 60 PITCH NICKEL PLATED
16 2 62-2720 2-215 O-RING .139 X 1.324 OD
17 4 62-2733 2-330 O-RING .210 X 2.520 OD
18 4 62-2752 2-349 O-RING .210 X 4.895 OD

SW
CHECKED BY
S. GRIGGS 6/24/08
TM
KIT-SPARE PARTS RC12-18
R APPROVED BY DATE
55-0253-01
SIZE
A

SHEET 1 of 1
DRAWING
4 3 2 1
ITEM PART
QTY DESCRIPTION
NO NUMBER
1 1 15-0600 WEB GUIDE ROLLER SHAFT 26 2 74-0125 SIEMENS PROFIBUS PG SOCKET CONNECTOR
D 2 1 25-0150 MOTOR-2HP 230/460V 1800 RPM 60 HZ 3 PH 27 1 74-0126 SIEMENS IM 151 INTERFACE MODULE
D
3 1 28-0918 HEATED HOSE-1/4 X 48 190 VOLTS 28 1 74-0128 SIEMENS POWER MODULE TERMINAL-SAFETY
4 1 30-0834 LATCH-22.5MM PUSH BUTTON 29 1 74-0129 SIEMENS POWER MODULE-SAFETY
5 1 30-0835 CONTACT BLOCK-22.5MM PUSHBUTTON 30 1 74-0130 SIEMENS CONTROL UNIT TERMINAL MODULE
6 1 30-0836 CONTACT BLOCK-NO LOW VOLTAGE 31 1 74-0131 SIEMENS ICU24F CONTROL UNIT-SAFETY
7 1 30-0841 MODULE-24V PB RED INTEGRATED LED 32 1 74-0132 SIEMENS TERMINAL MODULE W/FEEDER TERMNL
8 1 30-0842 MODULE-24V PB GREEN INTEGRATED LED 33 1 74-0133 SIEMENS IPM25 CONV PWR MODULE 2.2kW
9 1 30-1199 TRANSMITTER-PRESS TPT4634, 2 WIRE 34 1 74-0134 SIEMENS TERMINAL MODULE WO/FEEDER TERMNL
10 2 38-0064 WASHER-THRUST .500 X .813 X .094 PLASTIC 35 1 74-0135 SIEMENS TERMINAL MODULE WO/FEEDER TERMNL
11 2 38-0370 BEARING-BALL .500 X 1.125 X SST 36 1 74-0136 SIEMENS IPM25 CONV PWR MODULE 0.75kW
12 1 55-0250 KIT-SPARE PARTS T1209RC 37 1 74-0137 SIEMENS M15-L123 BRIDGE BLOCK
13 1 55-0252 KIT-SPARE PARTS GS15-300 C
C 38 1 74-0138 SIEMENS 512KB MICRO MEMORY CARD-CPU
14 1 55-0253 KIT-SPARE PARTS RC12-18 39 1 74-0139 SIEMENS MICRO MEMORY CARD FOR ICU24
15 1 57-0637 FILL HORN KEY 40 1 74-0144 SIEMENS FM350-1 COUNTER MODULE
16 1 57-0780 WEB GUIDE IDLER ROLLER 41 1 99-0459 GLUE EXTRUDER AUGER
17 1 74-0114 SIEMENS DIGITAL INTPUT MODULE
18 1 74-0115 SIEMENS DIGITAL OUTTPUT MODULE
19 1 74-0116 SIEMENS ANALOG INPUT MODULE
20 1 74-0117 SIEMENS F DIGITAL INPUT MODULE-SAFETY
21 1 74-0118 SIEMENS F DIGITAL OUTPUT MODULE-SAFETY
22 1 74-0119 SIEMENS CPU315F-2PN/DP
23 1 74-0120 SIEMENS MODULE SEPARATOR-SAFETY B
B 24 1 74-0121 SIEMENS 20 PIN FRONT CONNECTOR
25 1 74-0122 SIEMENS 40 PIN FRONT CONNECTOR
SW CHECKED BY
S. GRIGGS 7/1/08
DATE
KIT-INSTALL ROTA-CLIP 100T A

A TM
02 SEE ECN 55-0254-02 05/20/09 SDG R

APPROVED BY DATE
01 SEE ECN 55-0254-01 07/29/08 JEH S. GRIGGS 7/1/08 SIZE PART NO.
55-0254-02
REVISIONS J. HITE 7/1/08 J. HITE 7/1/08 SCALE

1:1 D0 NOT SCALE
REVISIONS
ITEM PART
QTY DESCRIPTION
NO NUMBER
1 1 11-0157 KNIFE BLADE, MOVABLE. CTC SPLICER
2 1 11-0158 BLADE, STATIONARY. CTC SPLICER
3 1 30-1266 FIBER OPTIC CABLE - CTC SPLICER
4 1 55-0268 HEAT SEAL CONSUMABLES - CTC SPLICER
SW TM
CHECKED BY
SG 03-24-09
DATE
SPARE PARTS KIT - CTC SPLICER

R APPROVED BY DATE
SG 03-24-09 SIZE
A
PART NO.
55-0269-01

ST 03-24-09 ST 03-24-09 SCALE 1:1 D0 NOT SCALE
SHEET 1 of 1
DRAWING
4 3 2 1
ITEM PART
QTY DESCRIPTION
NO NUMBER
D 1 1 04-0545 SMC RSDQB20-15T 32 2 38-0370 BEARING-BALL .500 X 1.125 X SST D
2 1 04-0546 SMC CDM2E20-25S CYL. 33 2 38-0438 WASHER-THRUST-.375 X .156 X .313 PLASTIC
3 1 04-0556 CYL-7/16 X 1 DA 34 1 38-0499 FILM SEAL ROLLER BRG
4 1 04-0561 CYL-25MM X 100MM SR 35 1 38-0510 BUSHING- 12MM X 14MM X 15MM LG
5 1 04-0611 CYL-32 X 25 DA - 8MM PIVOT 36 2 38-0513 BEARING-BALL-20MM X 42MM X 12MM SST
6 1 17-0192 SPRING-COMP- .360 X 1.5 X .029 SST 37 4 38-0514 BUSHING-.312x.375x.250 BRZ
7 2 21-0146 VALVE-DBL PUSH BUTTON 3 PORT DETENTED 38 2 38-0515 BEARING-BALL-15MM X 28MM X 7MM SST
8 2 21-0541 VALVE-3 PORT 4 POS DUAL NC/NC 24VDC 39 1 38-0516 BEARING-BALL 20MM SST FLGD PLST
9 1 24-0104 SMC REGULATOR AR30K-N03-Z 40 2 38-0517 BEARING-BALL-20MM X 32MM X 7MM SST
10 1 24-0122 NUT - USE ON 24-0121 41 1 38-0520 PILLOW BLOCK-20MM PLAIN BRG PLST
11 1 24-0138 HEATER RELEASE AGENT 42 2 38-0523 BEARING-FLANGE 20MM X 24MM X 20MM BRZ
12 2 27-5500 FILTER-REPLACEMENT, VACUUM PUMP 43 15 40-0141 FIBERGLASS ROPE SEAL 1/4 C
C 13 1 28-0917 MALE STRAIGHT CONN. 3/16 DIA.X 1/8 NPT 44 1 55-0213 KIT-REPAIR FOR 21-0511
14 2 29-1341 SMALLEY RING-42MM BORE 45 1 55-0215 KIT-REPAIR FOR DM2 STATUS INDICATOR
15 3 29-1342 SNAP RING - 20MM SHAFT 46 1 55-0245 KIT-REPLACE PRIMARY SOLENOID FOR 21-0511
16 2 29-1343 E-CLIP FOR 8MM SHAFT 47 1 55-0246 KIT-REPLACE RESET SOLENOID FOR 21-0511
17 4 29-1344 SNAP RING-15MM SHAFT 48 4 57-0209 ROTA-CLIP VACUUM DRIVE BELT
18 2 30-0282 SWITCH-PROX PNP 12MM 7MM RANGE 49 1 57-0301 CHAIN 60 PITCH NICKEL PLATED
19 1 30-0312 CA-4 WIRE STRAIGHT CONNECTOR 50 2 57-0803 TIMING BELT-H200-75-DBL
20 2 30-0863 SWITCH-HALL PNP NO 10/30VDC 51 1 62-2715 2-210 O-RING .139 X 1.012 OD
21 2 30-0870 CLAMP HOLDER-BLACK PLASTIC 52 2 62-2720 2-215 O-RING .139 X 1.324 OD
22 1 30-0938 CONTACTOR-3P DC OPER 1 NO AND 4 NC 53 4 62-2733 2-330 O-RING .210 X 2.520 OD B
23 2 30-1058 CONTACTOR-SOLID STATE 600 VAC 20A 54 4 62-2752 2-349 O-RING .210 X 4.895 OD
B
24 1 30-1089 CA-4 WIRE MALE/FEMALE STR .5M 55 1 74-0051 SENSOR, EI1805I020
25 3 30-1187 HEATER- 3/8 X 1, 200 WATTS 56 2 99-0619 6MM X 25MM LONG KEY SST
26 1 30-1188 TEMP PROBE- EXTRUDER PRESSURE TRANS. 57 1 99-0623 6MM X 55MM LONG KEY SST
27 2 30-1189 TEMP PROBE- GLUE NOZZLE RTD 58 1 99-0885 EXTRUDER RUPTURE DISC
28 2 30-1256 HEATER-BARREL 460V 650W 59 5 99-0936 GLUE NOZZLE - 2 HOLE
30 1 31-0041 GAUGE-0-60 PSI 1.50 IN 1/8 NPT
SW CHECKED BY
LOWDER 04/14/09
DATE
KIT-SPARE PARTS ROTA-CLIP A

A TM
APPROVED BY DATE
R
GRIGGS 04/14/09 SIZE PART NO.
55-0273-00
REVISIONS S.GRIGGS 04/14/09 GRIGGS 04/14/09 SCALE

1:1 D0 NOT SCALE
15.3
Clippers
8 7 6 5 4 3 2 1
ITEM SHEET PART DESCRIPTION

NO. #1/QTY. NUMBER
1 1 00-2895 T1209RC DIE SUPPORT ASM.
2 1 00-2896 T1209RC SPOOL MOUNT ASM.
3 1 00-2897 T1209RC PUNCH CYL ASM 3
H
H
4 1 01-0957 GATE DRIVE BLOCK
5 1 04-0549 CYL-50 X 235 DA METRIC 16
6 1 08-0165 GATHERING PLATE ASM. - T1209RC RH
7 1 08-0167 GATHERING PLATE ASM. - T1209RC LH
8 1 10-4563 MOUNTING PLATE (Z2209RC)
9 1 10-4564 JACK SCREW ASSEMBLY
10 2 10-4565 CLIP TUBE MOUNT
11 2 10-4566 CLIP TUBE CLAMP
12 1 10-4567 PIN STABILIZER PLATE 5
13 1 10-4568 GATE CYL CLEVIS ASSEMBLY
G 14 1 10-4589 TUBING BRACKET 32 4 PLACES G
15 1 16-0938 SPACER-.176 RND .875 X .510 DELRIN

18 1 28-0877 PLFTG-PLUG-IN CROSS 6MM X 6MM
19 1 29-0198 M18 X 1.5 HEX JAM NUT 300 SST
20 4 29-0566 M6 X 20 MM LG FH SST
21 8 29-0651 M5 X 12 MM LG HH SST DIN 933
22 13 29-0668 M6 X 12 MM LG HH SST DIN 933 STAMP SERIAL NUMBER HERE
23 4 29-0690 M8 X 30 MM LG HH SST DIN 933
24 4 29-0911 M6 X 40 MM LG SH SST DIN 912 F
F
25 3 29-0923 M8 X 25 MM LG SH SST
28 4 29-1162 M6 HEX THIN NUT SST, JAM NUT
29 10 29-1332 6.4 ID X 18 OD X 1.6 MM THK FLT WASHER 34
30 1 29-1333 M16 X 3-3/8 LG JACK SCREW 42
31 4 29-1336 M14 HEX NUT SST
32 4 29-1337 M14 X 40 MM LG HH SST DIN 931
34 6 38-0572 BEARING-THRUST .625 X 1.188 X .094 19
E
E 35 1 39-0404 PIN-.500 PIVOT 1.362 LG TAPPED ENDS
36 2 39-0405 PIN-.500 PIVOT 2.651 LG TAPPED ENDS 13
37 1 39-0406 PIN-.500 PIVOT 1.522 LG W/FLAT
38 1 39-0407 PIN-.500 CLEVIS 1.145 TAPPED ENDS 14
39 1 39-9675 PIN-.188 DOWEL .750 22
40 2 57-0783 LINKAGE ARM
41 2 57-0791 KICK BELT 22
42 1 57-0837 DRIVE ARM ASSEMBLY (T1209RC) 29
43 2 99-0923 CLIP FEED TUBE WELDMENT
44 2 99-1246 8MM ID LOCK WASHER SST
38 D
D
23 29
22
30
23
9 44
4
39
31 4 PLACES
C
C 8
20
10
25 B
B 43
3 PLACES
11
1 24
SEE SHEET #2
FOR GATE DETAIL
41
21 A
A
04 SEE ECN T1209RC-04 04/07/09 CDS CHECKED BY DATE
03 SEE ECN T1209RC-03 01-15-09 SDG TIPPER TIE S. GRIGGS 7/30/07 T1209RC CLIPPER ASSY.
06
05
SEE ECN T1209RC-06
SEE ECN T1209RC-05
06/23/09
04/28/09
SDG
SDG
02
01
SEE ECN T1209RC-02
SEE ECN T1209RC-01
10-13-08
10/11/07
SDG
JEH
A DOVER INDUSTRIES COMPANY SW APPROVED BY
S. GRIGGS 7/30/07
DATE
SIZE PART NO.
NO. ZONE DESCRIPTION DATE APPROV. NO. ZONE DESCRIPTION DATE APPROV DRAWN BY
J. HITE 5/31/07
DATE RELEASED BY DATE T1209RC-06
J. HITE 7/30/07 1:2
D0 NOT SCALE
REVISIONS SCALE DRAWING SHEET 1 of 2
8 7 6 5 4 3 2 1
ITEM SHEET PART ITEM SHEET PART ITEM SHEET PART

DESCRIPTION DESCRIPTION DESCRIPTION
NO. #1/QTY. NUMBER NO. #1/QTY. NUMBER NO. #1/QTY. NUMBER
1 1 00-2895 T1209RC DIE SUPPORT ASM. 18 1 28-0877 PLFTG-PLUG-IN CROSS 6MM X 6MM 35 1 39-0404 PIN-.500 PIVOT 1.362 LG TAPPED ENDS
2 1 00-2896 T1209RC SPOOL MOUNT ASM. 19 1 29-0198 M18 X 1.5 HEX JAM NUT 300 SST 36 2 39-0405 PIN-.500 PIVOT 2.651 LG TAPPED ENDS
H 3 1 00-2897 T1209RC PUNCH CYL ASM 20 4 29-0566 M6 X 20 MM LG FH SST 37 1 39-0406 PIN-.500 PIVOT 1.522 LG W/FLAT H
4 1 01-0957 GATE DRIVE BLOCK 21 8 29-0651 M5 X 12 MM LG HH SST DIN 933 38 1 39-0407 PIN-.500 CLEVIS 1.145 TAPPED ENDS
5 1 04-0549 CYL-50 X 235 DA METRIC 22 13 29-0668 M6 X 12 MM LG HH SST DIN 933 39 1 39-9675 PIN-.188 DOWEL .750
6 1 08-0165 GATHERING PLATE ASM. - T1209RC RH 23 4 29-0690 M8 X 30 MM LG HH SST DIN 933 40 2 57-0783 LINKAGE ARM
7 1 08-0167 GATHERING PLATE ASM. - T1209RC LH 24 4 29-0911 M6 X 40 MM LG SH SST DIN 912 41 2 57-0791 KICK BELT
8 1 10-4563 MOUNTING PLATE (Z2209RC) 25 3 29-0923 M8 X 25 MM LG SH SST 42 1 57-0837 DRIVE ARM ASSEMBLY (T1209RC)
9 1 10-4564 JACK SCREW ASSEMBLY 26 2 29-1008 M6 X 16MM LG SETSCREW CUPPT SST 43 2 99-0923 CLIP FEED TUBE WELDMENT
10 2 10-4565 CLIP TUBE MOUNT 27 2 29-1010 M6 X 25MM LG SETSCREW CUPPT SST 44 2 99-1246 8MM ID LOCK WASHER SST
11 2 10-4566 CLIP TUBE CLAMP 28 4 29-1162 M6 HEX THIN NUT SST, JAM NUT
G 12 1 10-4567 PIN STABILIZER PLATE 29 10 29-1332 6.4 ID X 18 OD X 1.6 MM THK FLT WASHER G
13 1 10-4568 GATE CYL CLEVIS ASSEMBLY 30 1 29-1333 M16 X 3-3/8 LG JACK SCREW
14 1 10-4589 TUBING BRACKET 31 4 29-1336 M14 HEX NUT SST
15 1 16-0938 SPACER-.176 RND .875 X .510 DELRIN 32 4 29-1337 M14 X 40 MM LG HH SST DIN 931
16 1 28-0183 PLFTG-MALE CONN 8MM-1/4BSPT 33 6 38-0494 BEARING-THRUST .500 X 1.000 X .125
17 1 28-0194 PLFTG-MALE CONN 10MM-1/4BSPT 34 6 38-0572 BEARING-THRUST .625 X 1.188 X .094
F
F
29
22
33
22 29
E
E
18 34 35 34
27
12
28
29 33
D
D
27
28
22
29
33 22
40 C
C 22 28 15
26
29
36 33 29 22
34 42 34 26 28
B
B
1
DIE SUPPORTS SHOWN 7
SEPARATED FOR CLARITY
37 29 22 40 36 33 29 22
A
A
CHECKED BY DATE
6 TIPPER TIE S. GRIGGS 7/30/07

T1209RC CLIPPER ASSY.
S. GRIGGS 7/30/07
DATE
SIZE PART NO.
DRAWN BY
J. HITE 5/31/07
DATE RELEASED BY DATE T1209RC-06
J. HITE 7/30/07 1:1.25
D0 NOT SCALE
SCALE DRAWING SHEET 2 of 2
8 7 6 5 4 3 2 1
ITEM PART
QTY DESCRIPTION
NO. NUMBER
1 1 00-2893 T1209RC RH CLIP PUSHER ASM.
2 1 00-2894 T1209RC LH CLIP PUSHER ASM.
3 1 04-0419 CLEVIS-10-32 SHAFT SST
4 1 04-0551 CYL-.563 X .500 DA H
H
5 1 04-0552 BRACKET-PIVOT SST
6 1 04-0553 CYL-32 X 45 DA 37
7 2 05-0045 DIE, L.H.
8 1 06-0230 5
9 1 06-0231 46 54
10 1 10-4553 DIE SUPPORT MOUNT 4
25 35
11 1 10-4554 KNIFE BLADE CLEVIS
12 2 10-4555 EJECTOR BELT MOUNT
49
13 1 10-4556 TUBING BRACKET 10
14 1 10-4561 TRIGGER MOUNT BRACKET
15 1 10-4588 KNIFE CYLINDER MOUNT 22 ADD 4" LONG PIECE
3 OF 4MM BLACK POLY
16 1 11-0050 KNIFE BLADE #M-0316 TUBE # 28-0436 TO
17 1 16-0837 SPACER-.35 RND .750 X .421 SST G
G THIS ELBOW.
18 1 18-0350 DIE SUPPORT PRODUCT RH SUPPORT 42
19 1 18-0367 DIE SUPPORT PRODUCT LH SUPPORT
34
21 33
21 1 21-0257 VALVE-4 WAY SPOOL SR TYPE 32 14 24
22 1 28-0195 MALE ELBOW 3199-04-19
24 1 28-0199 PLFTG-MALE ELBOW 6MM-1/8BSPT
25 1 28-0215 PLFTG-MALE ELBOW 6MM-M5
26 1 28-0919 PLTFG-MALE ELB BALL VALVE 5/32-1/8NPT
27 1 28-9135 1/8 ALLEN PIPE PLUG FLUSH MT SST
28 12 29-0543 M5 X 10 MM LG FH SST 8
29 4 29-0580 M8 X 10 MM LG FH SST F
F 30 2 29-0656 M5 X 30 MM LG HH SST DIN 933
31 4 29-0668 M6 X 12 MM LG HH SST DIN 933 13
32 6 29-0670 M6 X 16 MM LG HH SST DIN 933
33 3 29-0671 M6 X 20 MM LG HH SST DIN 933 20 26
27 9 11
34 2 29-0705 M10 X 20 MM LG HH SST DIN 933
35 2 29-0707 M10 X 30 MM LG HH SST DIN 933 16
31 55 35
36 1 29-0865 M4 X 5 MM LG SH SST 41
37 2 29-0871 M4 X 16 MM LG SH SST 45 36
34
38 4 29-0900 M5 X 70 MM LG SH SST 17
52
39 1 29-0941 M10 X 40 MM LG SH SST
41 2 29-1127 M5 HEX NUT SST
39 15 E
E
42 1 29-1128 M6 HEX NUT SST 40 44
43 1 29-1133 M10 HEX NUT SST 51 52
44 2 29-1162 M6 HEX THIN NUT SST, JAM NUT 32
50 43
45 2 29-1332 6.4 ID X 18 OD X 1.6 MM THK FLT WASHER
46 2 29-4683 SCREW-DRIVE-U TYPE NO 2 X 3/16 LG RND HD
47
47 1 32-2598 DIE COVER RH (T1209RC)
48 1 32-2599 DIE COVER LH (T1209RC)
19
49 1 32-2611 TRIGGER MOUNT NUT PLATE
50 1 32-2649 AIR VOIDER (T1209RC) 12
51 1 38-0511 BEARING-SLEEVE .313 X .438 X .250
52 2 38-1265 BEARING-THRUST .500 X 1.000 X .063 BRZ 45
53 1 39-0402 PIN-.312 PIVOT 1.263 LG TAPPED ENDS
54 1 99-0604 PART NUMBER TAG 6
D
D 7 31
38
33
C
C
54
2 7
28
48
1
31
33 29 B
B
18
12
A
A
08 SEE ECN 00-2895-08 08/24/09 ST 04 SEE ECN 00-2895-04 12/17/07 JEH CHECKED BY DATE
07 SEE ECN 00-2895-07 03/04/09 ST 03 SEE ECN 00-2895-03 12/13/07 JEH TIPPER TIE S. GRIGGS 7/27/07 T1209RC DIE SUPPORT ASM.
06
05
SEE ECN 00-2895-06
SEE ECN 00-2895-05
03/02/09
1/28/09
ST
MDL
02
01
SEE ECN 00-2895-02
SEE ECN 00-2895-01
11/26/07
10/12/07
JEH
JEH
S. GRIGGS 7/27/07
DATE
SIZE PART NO.
J. HITE 7/27/07
DATE RELEASED BY DATE 00-2895-08
J. HITE 7/27/07 1:1.5
D0 NOT SCALE
4 3 2 1
ITEM PART
QTY DESCRIPTION
NO. NUMBER 11
1 1 01-0955 REAR SPOOL BLOCK
2
2 1 10-4558 SPOOL BRAKE ARM - T1209RC
3 2 10-4559 SPOOL SIDE MOUNT PLATE 9
4 1 10-4928 SPOOL ROD HOLDER D
10
5 1 10-5015 SPOOL MOUNT SUPPORT BAR 17
6 2 15-0604 ROD-SPOOL - .750 DIA X 8.875 16
D 17
7 1 17-0212 SPRING. EXTENSION .50 x 3.00 SST .037
8 1 18-0351 SPOOL SUPPORT ARM
9 2 29-0119 M6 SELF LOCK HEX NUT SST 12
20
10 1 29-0119 M6 SELF LOCK HEX NUT SST 7
11 1 29-0671 M6 X 20 MM LG HH SST DIN 933
19 17
12 4 29-0683 M8 X 10 MM LG HH SST DIN 933 16
17 13
13 6 29-0689 M8 X 25 HEX HEAD SST DIN 933
19
14 2 29-0689 M8 X 25 HEX HEAD SST DIN 933 9
15 2 29-1163 M8 HEX THIN NUT SST, JAM NUT 20 6

16 2 37-0245 BUMPER, URETHANE TTt CLIP SPOOL
8
17 4 38-0600 BEARING, FLANGED 5/16 DIA. SHAFT x 1/2 LG. C
C
18 1 39-0451 PIN-8MM SPRING ANCHOR 70MM LG 18
19 24 62-0107 O-RING, SQUARE PROFILE 13
2 PLC'S
20 8 99-1040 SPLIT SPOOL ROLLER - T1209RC 20
15
20
19 3 PLC'S
19
3 PLC'S
19 3 PLC'S
19
3 PLC'S 20
1
20
6 B
19
4 3 PLC'S
B
20
13
2 PLC'S 5
14 12
19
3 PLC'S
20
3
A A
08 SEE ECN 00-2896-08 CDS

SW
CHECKED BY DATE
07/31/09
07 SEE ECN 00-2896-07 07/29/09 CDS TM
S. GRIGGS 7/27/07 T1209RC SPOOL MOUNT ASM.
10 SEE ECN 00-2896-10 09-01-10 ST R APPROVED BY DATE
09 ST S. GRIGGS 7/27/07
SEE ECN 00-2896-09 07/28/10 SIZE PART NO.
00-2896-10
ZONE DATE DRAWN BY DATE RELEASED BY DATE

NO. DESCRIPTION APPROVED
REVISIONS J. HITE 7/27/07 J. HITE 7/27/07 SCALE 1:3 D0 NOT SCALE

DRAWING
SHEET 1 of 1
4 3 2 1
ITEM QTY PART DESCRIPTION

NO. NUMBER

15
2 1 10-4558 SPOOL BRAKE ARM - T1209RC 11
10
3 2 10-4559 SPOOL SIDE MOUNT PLATE 16
D
4 1 10-4928 SPOOL ROD HOLDER 16
5 1 10-5015 SPOOL MOUNT SUPPORT BAR
D 10
6 2 15-0714 ROD-SPOOL - .750 DIA X 10.437
7 4 16-0998 SPACER - SPOOL ROLLER (TTt)
8 1 17-0203 SPRING-EXTN .50 X 3.50 SST .037 16
9 1 18-0351 SPOOL SUPPORT ARM

16
10 3 29-0119 M6 SELF LOCK HEX NUT SST
11 1 29-0671 M6 X 20 MM LG HH SST DIN 933 12 3
12 4 29-0683 M8 X 10 MM LG HH SST DIN 933
12 19
18 3 PLC'S 15
15 2 37-0245 BUMPER, URETHANE TTt CLIP SPOOL 8
BEARING, FLANGED 5/16 DIA. SHAFT x 7 10
16 4 38-0600 1/2 LG.
C C
18 19
18 24 62-0107 O-RING, SQUARE PROFILE 6
3 PLC'S
9
19 8 99-1040 SPLIT SPOOL ROLLER - T1209RC
17 19
2 PLC'S 13 18 3 PLC'S
14
19 18 3 PLC'S
7
18 19
3 PLC'S 7
B
18
B 3
3 PLC'S 19
18
6 3 PLC'S
13
19
5
13 18
A 7 A
3 PLC'S 19
12
12
SW T1209RC SPOOL MOUNT

CHECKED BY DATE
SG 07-28-10
ASSEMBLY (TTt)
TM
R APPROVED BY DATE
SG 07-28-10
01 SEE ECN 00-3565-01 09/01/10 ST SIZE PART NO.
00-3565-01
DOVER INDUSTRIES COMPANY

NO. ZONE DESCRIPTION DATE APPROVED
ST 07-28-10 ST 07-28-10
DRAWING
SHEET 1 of 1
A
4 3 2 1
ITEM PART
QTY DESCRIPTION
NO. NUMBER
2
1 3 38-0274 BUSHING-.500 X .625 X .313 BRZ

1
D
2 1 57-0785-AA DRIVE ARM - T1209RC
C .501 C
.500
REAM BEARING HOLES
AFTER INSTALLING
.501
.500 1 B
B PRESS FIT INTO

DRIVE ARM
.501
.500
.087 TYP R
A A
SW
CHECKED BY DATE
TM
S. GRIGGS 7/30/07 DRIVE ARM ASSEMBLY (T1209RC)
R APPROVED BY DATE
S. GRIGGS 7/30/07
01 SEE ECN 57-0785-01 04/02/09 CDS SIZE PART NO.
57-0785-01

NO. ZONE DESCRIPTION DATE APPROVED
J. HITE 5/9/07 J. HITE 7/30/07
DRAWING
SHEET 1 of 2
A
4 3 2 1
.143 D
.133
57-0785-AA
MATERIAL: 400 SERIES SST
HEAT TREAT: 35-40 Rc
QTY: 1 6.262
6.258
3.255
3.245 C
C
43
41
2.005
1.985
3.391 67
3.387 65
1.385
1.365
B
B 10
8
1.803
R .265
1.783 R
.235 .752
2 PLC'S .732
.625 2.428
THRU R
.624 2.408
3 PLACES
.515 6.430
R TYP.
.485 6.426
A A
SW
CHECKED BY DATE
TM
S. GRIGGS 7/30/07 DRIVE ARM ASSEMBLY (T1209RC)
R APPROVED BY DATE
S. GRIGGS 7/30/07 SIZE PART NO.
57-0785-01
J. HITE 5/9/07 J. HITE 7/30/07 SCALE 1:1 D0 NOT SCALE

DRAWING
SHEET 2 of 2
8 7 6 5 4 3 2 1
ITEM PART
QTY DESCRIPTION
NO. NUMBER
1 1 00-2882 Z2209RC DIE SUPPORT ASM.
2 1 00-2892 Z2209RC PUNCH CYL ASM
H 4 1 01-0957 GATE DRIVE BLOCK H
5 1 04-0549 CYL-50 X 235 DA METRIC 16
6 1 08-0159 GATHERING PLATE ASM. - Z2209RC RH
7 1 08-0162 GATHERING PLATE ASM. - Z2209RC LH
8 1 10-4563 MOUNTING PLATE (Z2209RC) 2
11 2 10-4566 CLIP TUBE CLAMP 5
12 1 10-4567 PIN STABILIZER PLATE
14 1 10-4589 TUBING BRACKET
G 15 1 16-0938 SPACER-.176 RND .875 X .510 DELRIN G
17
19 1 29-0198 M18 X 1.5 HEX JAM NUT 300 SST
20 4 29-0225 M14 X 50 MM LG HH SST DIN 931
21 4 29-0566 M6 X 20 MM LG FH SST
22 8 29-0651 M5 X 12 MM LG HH SST DIN 933
23 13 29-0668 M6 X 12 MM LG HH SST DIN 933
24 4 29-0690 M8 X 30 MM LG HH SST DIN 933
25 4 29-0911 M6 X 40 MM LG SH SST DIN 912
F
26 3 29-0923 M8 X 25 MM LG SH SST F
31 1 29-1333 M16 X 3-3/8 LG JACK SCREW 33
34 1 39-0404 PIN-.500 PIVOT 1.362 LG TAPPED ENDS 19
36 1 39-0406 PIN-.500 PIVOT 1.522 LG W/FLAT
37 1 39-0407 PIN-.500 CLEVIS 1.145 TAPPED ENDS 13 E
E
38 1 39-9675 PIN-.188 DOWEL .750
33
40 1 57-0784 DRIVE ARM ASSEMBLY (Z2209RC)
41 2 57-0791 KICK BELT
42 2 99-0923 CLIP FEED TUBE WELDMENT
43 2 99-1246 8MM ID LOCKWASHER SST 23
30
14 23
37
30 D
D
24 23
31
38
9 24
43
4
C
C
20 4 PLACES
8
21
B
B 10
42
26
3 PLACES
3 22
11
25
1
SEE SHEET #2 A
A FOR GATE DETAIL 22 *
CHECKED BY DATE
TIPPER TIE S. GRIGGS 7/30/07 Z2209RC CLIPPER ASSY.

02
01
SEE ECN Z2209RC-02
SEE ECN Z2209RC-01
10/1/10
08/10/10
CDS
ST
S. GRIGGS 7/30/07
DATE
SIZE PART NO.
J. HITE 5/30/07
DATE RELEASED BY DATE Z2209RC-02
J. HITE 7/30/07 1:2
D0 NOT SCALE
8 7 6 5 4 3 2 1
ITEM PART
QTY DESCRIPTION
NO. NUMBER
1 1 00-2882 Z2209RC DIE SUPPORT ASM.
2 1 00-2892 Z2209RC PUNCH CYL ASM
H 4 1 01-0957 GATE DRIVE BLOCK H
5 1 04-0549 CYL-50 X 235 DA METRIC
6 1 08-0159 GATHERING PLATE ASM. - Z2209RC RH
7 1 08-0162 GATHERING PLATE ASM. - Z2209RC LH
8 1 10-4563 MOUNTING PLATE (Z2209RC)
11 2 10-4566 CLIP TUBE CLAMP
12 1 10-4567 PIN STABILIZER PLATE
14 1 10-4589 TUBING BRACKET
G 15 1 16-0938 SPACER-.176 RND .875 X .510 DELRIN G
19 1 29-0198 M18 X 1.5 HEX JAM NUT 300 SST
20 4 29-0225 M14 X 50 MM LG HH SST DIN 931
21 4 29-0566 M6 X 20 MM LG FH SST
22 8 29-0651 M5 X 12 MM LG HH SST DIN 933
23 13 29-0668 M6 X 12 MM LG HH SST DIN 933
30 32 24 4 29-0690 M8 X 30 MM LG HH SST DIN 933
23
25 4 29-0911 M6 X 40 MM LG SH SST DIN 912
F 39 26 3 29-0923 M8 X 25 MM LG SH SST F
32 28 2 29-1010 M6 X 25MM LG SETSCREW CUPPT SST
23 30 10 29-1332 6.4 ID X 18 OD X 1.6 MM THK FLT WASHER
30 31 1 29-1333 M16 X 3-3/8 LG JACK SCREW
34 33 35 2 39-0405 PIN-.500 PIVOT 2.651 LG TAPPED ENDS
33 36 1 39-0406 PIN-.500 PIVOT 1.522 LG W/FLAT
18
37 1 39-0407 PIN-.500 CLEVIS 1.145 TAPPED ENDS E
E
38 1 39-9675 PIN-.188 DOWEL .750
40 1 57-0784 DRIVE ARM ASSEMBLY (Z2209RC)
28 29 41 2 57-0791 KICK BELT
12 42 2 99-0923 CLIP FEED TUBE WELDMENT
30 32
43 2 99-1246 8MM ID LOCKWASHER SST
15
D
D
28 29
27 23
23 30 32 29
35 32 30 23
C
C
33 33 33 40 33 27 29
1
DIE SUPPORTS SHOWN
SEPARATED FOR CLARITY 30 23
36 B
B
39 35 32 30 23
7
A
A
6
Z2209RC CLIPPER ASSY.
CHECKED BY DATE
TIPPER TIE S. GRIGGS 7/30/07

S. GRIGGS 7/30/07
DATE
SIZE PART NO.
DRAWN BY
J. HITE 5/30/07
DATE RELEASED BY DATE Z2209RC-02
J. HITE 7/30/07 1:1.25
D0 NOT SCALE
8 7 6 5 4 3 2 1
ITEM PART
QTY DESCRIPTION
NO. NUMBER
1 1 00-2880 Z2209RC RH CLIP PUSHER ASM.
2 1 00-2881 Z2209RC LH CLIP PUSHER ASM.
3 1 04-0419 CLEVIS-10-32 SHAFT SST
H
H 4 1 04-0551 CYL-.563 X .500 DA
5 1 04-0552 BRACKET-PIVOT SST 37
6 1 04-0553 CYL-32 X 45 DA
7 2 05-0109 DIE-Z200 ANGLED Z2200RC LH
4 25 46
8 1 06-0228 54
9 1 06-0229 DIE SUPPORT RH - Z2209RC
10 1 10-4553 DIE SUPPORT MOUNT 35
11 1 10-4554 KNIFE BLADE CLEVIS 10
12 2 10-4555 EJECTOR BELT MOUNT ADD 4" LONG PIECE
22 OF 4MM POLY BLACK 34
13 1 10-4556 TUBING BRACKET TUBE # 28-0436 TO
14 1 10-4561 TRIGGER MOUNT BRACKET THIS ELBOW
15 1 10-4588 KNIFE CYLINDER MOUNT G
G
49
16 1 11-0050 KNIFE BLADE #M-0316
17 1 16-0837 SPACER-.35 RND .750 X .421 SST 13
18 1 18-0350 DIE SUPPORT PRODUCT RH SUPPORT 42
19 1 18-0367 DIE SUPPORT PRODUCT LH SUPPORT
32 33
22 1 28-0195 MALE ELBOW 3199-04-19
25 1 28-0215 MALE ELBOW 3199-06-19 30
26 1 28-0919 PLTFG-MALE ELB BALL VALVE 5/32-1/8NPT 35
F
F
28 12 29-0543 M5 X 10 MM LG FH SST
29 4 29-0580 M8 X 10 MM LG FH SST
21
30 2 29-0656 M5 X 30 MM LG HH SST DIN 933 20
31 4 29-0668 M6 X 12 MM LG HH SST DIN 933 34
32 6 29-0670 M6 X 16 MM LG HH SST DIN 933
39
33 3 29-0671 M6 X 20 MM LG HH SST DIN 933 41
34 2 29-0705 M10 X 20 MM LG HH SST DIN 933 55
35 2 29-0707 M10 X 30 MM LG HH SST DIN 933 47 9
36 1 29-0865 M4 X 5 MM LG SH SST
37 2 29-0871 M4 X 16 MM LG SH SST 19 E
E 38 4 29-0900 M5 X 70 MM LG SH SST 12 31
39 1 29-0941 M10 X 40 MM LG SH SST
40
41 2 29-1127 M5 HEX NUT SST
42 1 29-1128 M6 HEX NUT SST
43 1 29-1133 M10 HEX NUT SST 36
7 44 40
SCREW-DRIVE-U TYPE NO 2 X 3/16 LG RND
46 2 29-4683 HD
47 1 32-2596 DIE COVER RH (Z2209RC)
48 1 32-2597 DIE COVER LH (Z2209RC) D
D
49 1 32-2611 TRIGGER MOUNT NUT PLATE 32
50 1 32-2649 AIR VOIDER (T1209RC) 31
51 1 38-0511 BEARING-SLEEVE .313 X .438 X .250 33
52 2 38-1265 BEARING-THRUST .500 X 1.000 X .063 BRZ
54 1 99-0604 PART NUMBER TAG 8
50 7
C
C
6
54
28
B
B 38
48
29
31
33 18
A
A
04 SEE ECN 00-2882-04 01/28/09 MDL CHECKED BY DATE
07 SEE ECN 00-2882-07 08/24/09 ST 03 SEE ECN 00-2882-03 12/17/07 JEH TIPPER TIE S. GRIGGS 7/26/07 Z2209RC DIE SUPPORT ASM.
06
05
SEE ECN 00-2882-06
SEE ECN 00-2882-05
03/04/09
03/03/09
ST
ST
02
01
SEE ECN 00-2882-02
SEE ECN 00-2882-01
12/13/07
11/26/07
JEH
JEH
S. GRIGGS 7/26/07
DATE
SIZE PART NO.
J. HITE 7/26/07
J. HITE 7/26/07 1:1.5
D0 NOT SCALE
7 6 5 4 3 2 1
8
ITEM PART
QTY DESCRIPTION
NO. NUMBER
15
19
2 2 10-4559 SPOOL SIDE MOUNT PLATE
9
3 1 10-4928 SPOOL ROD HOLDER 19
4 1 10-5015 SPOOL MOUNT SUPPORT BAR 18

14
D
5 1 10-5117 SPOOL BRAKE ARM - Z2200RC D
6 2 15-0603 ROD-SPOOL - .750 DIA X 10.875

5
7 1 17-0203 SPRING-EXTN .50 X 3.50 SST .037
10 17
8 1 18-0351 SPOOL SUPPORT ARM 7
9 2 29-0119 M6 SELF LOCK HEX NUT SST

18
10 4 29-0683 M8 X 10 MM LG HH SST DIN 933
9
6
8
14 1 39-0295 PIN-.750 CIRCLE COTTER

C C
15 1 39-0403 PIN-.250 HEADED .750 LG W/HOLE
16
11
17 4 99-0849 SPOOL ROLLER (Z2209RC)
13
18 2 99-0854 SPOOL BRAKE ROLLER

17
17
6
1
B
3 B
11
11
12
17 2 10
4
A A
ASSEMBLED VIEW
04
03
SEE ECN 00-2891-04
SEE ECN 00-2891-03
02/26/08
12/26/07
JEH
SDG
SW CHECKED BY
S. GRIGGS
DATE
7/26/07
Z2200RC SPOOL MOUNT ASSY
TM
02 SEE ECN 00-2891-02 12/10/07 JEH R APPROVED BY DATE
05 SEE ECN 00-2891-05 08/21/09 ST 01 SEE ECN 00-2891-01 1/05/07 JEH S. GRIGGS 7/26/07
00-2891-05
A DOVER INDUSTRIES COMPANY SIZE PART NO.
DESCRIPTION DATE APPROVED DESCRIPTION DATE APPROVED DRAWN BY DATE RELEASED BY DATE
NO. ZONE NO. ZONE
J. HITE 7/26/07 J. HITE 7/26/07
7 6 5 4 3 2 1
8
extend
ITEM PART
ed/QTY DESCRIPTION
NO. NUMBER
.
1 1 04-0241 BODY-CYL
2 1 10-1474 DOUBLE CLEVIS PIN

16 8
3 1 10-1475 DOUBLE CLEVIS BRACKET
4 2 13-0123 PUNCH-Z200 CONCAVE NR 9.480
5 1 18-0352 GATE CYLINDER SUPPORT BAR

D 5 D
6 1 18-0357 PUNCH SUPPORT (Z2209RC)
7 1 18-0360 GATE CYLINDER SUPPORT

4 PLACES
8 1 21-0492 GATE CYLINDER MANIFOLD ASSY. 2 19
7
9 2 21-4644 VALVE-QEXH 3/8 NPT

16
11 2 28-0098 3/8 NPT MUFFLER PLASTIC
14 4 PLACES
SNAP RINGS
13 2 28-9093 3/8 HEX NIPPLE BRASS SUPPLIED WITH PIN
14 4 29-0225 M14 X 50 MM LG HH SST DIN 931 REPLACEMENT SNAP RING
P/N 29-1224
15 4 29-0596 M10 X 25 MM LG FH SST
12 C
C 16 4 29-0667 M6 X 10 MM LG HH SST DIN 933 15 2 PLACES
9
17 2 29-0684 M8 X 12 MM LG HH SST DIN 933 2 PLACES 11
18 4 29-0688 M8 X 20 MM LG HH SST DIN 933 18
15
19 4 29-1129 M8 HEX NUT SST 4 PLACES

3
1
SHOWN EXTENDED
13
10
B
B
20
17
17
20
A
A
SW CHECKED BY
S. GRIGGS 7/26/07
DATE
Z2209RC PUNCH CYL ASM

TM
R APPROVED BY DATE
S. GRIGGS 7/26/07
01 SEE ECN 00-2892-01 CDS
00-2892-01
SIZE PART NO.
11/03/09 A DOVER INDUSTRIES COMPANY
DESCRIPTION APPROVED DESCRIPTION DATE APPROVED DRAWN BY DATE RELEASED BY DATE

NO. ZONE DATE NO. ZONE
J. HITE 7/26/07 J. HITE 7/26/07 1 1
REVISIONS SCALE 1:2.5 D0 NOT SCALE
DRAWING SHEET of
4 3 2 1
ITEM PART
QTY DESCRIPTION
NO. NUMBER
1 1 08-0158 GATE - Z2209RC
2 1 08-0163 GATHERING PLATE - LH OUTER 2

D
3 1 08-0164 GATHERING PLATE - LH INNER
4 6 29-0544 M5 X 12MM LG FH SST

D
C C
4
WHEN INSTALLED, THE
SCREW HEADS MUST BE
FLUSH OR BELOW THE SURFACE
OF THE PLATE
A A
SW
CHECKED BY DATE
TM
S. GRIGGS 7/25/07 GATHERING PLATE ASM. - Z2209RC LH
R APPROVED BY DATE
S. GRIGGS 7/25/07
01 SEE ECN 08-0162-01 04/13/09 SDG SIZE PART NO.
08-0162-01


DRAWING
SHEET 1 of 1
15.4
Pneumatic,
Electrical &
Controls
4 3 2 1

NO. NUMBER
1 1 74-0112 SIMATIC S7-300 RAIL 830 MM LONG
2 1 74-0114 SIEMENS DIGITAL INPUT MODULE
3 2 74-0115 SIEMENS DIGITAL OUTPUT MODULE
D D
4 1 74-0116 SIEMENS ANALOG INPUT MODULE
5 1 74-0117 SIEMENS F DIGITAL INPUT MODULE-SAFETY 6
6 1 74-0118 SIEMENS F DIGITAL OUTPUT MODULE-SAFETY
5
7 1 74-0119 SIEMENS CPU315F-2PN/DP 10
8
8 1 74-0120 SIEMENS MODULE SEPARATOR-SAFETY 12 10
9 4 74-0121 SIEMENS 20 PIN FRONT CONNECTOR 4
3
10 3 74-0122 SIEMENS 40 PIN FRONT CONNECTOR 3 9
11 1 74-0138 SIEMENS 512KB MICRO MEMORY CARD-CPU 2
12 1 74-0144 SIEMENS FM350-1 COUNTER MODULE 10
9
C
C 9
9
7 11
B
B
30-1193 1 REQ'D 1FT LONG ETHERNET CABLE

TO 30-0940 ETHERNET SWITCH SHOWN
ON 00-2910 UPPER DIN RAIL ASSEMBLY
SW CHECKED BY
T.E.W. 12/13/07
DATE
GS300 CONTROLLER RAIL A
A
ASSEMBLY
TM
02 SEE ECN 00-2902-02 05/26/09 KLP R

APPROVED BY DATE
01 SEE ECN 00-2902-01 07/08/08 KLP M.POTEAT 12/13/07 SIZE PART NO.
00-2902-02

1:2 D0 NOT SCALE
4 3 2 1
ITEM QTY PART ITEM QTY PART

DESCRIPTION DESCRIPTION
1 2 30-0170 WAGO 6MM SCREWLESS END BLOCK 249-116 12 3 74-0131 SIEMENS ICU24F CONTROL UNIT-SAFETY
2 1 30-0422 AB SWITCH HANDLE 13 1 74-0132 SIEMENS TERMINAL MODULE WITH FEEDER TERMINAL
3 2 30-1165 SIMATIC SS 35MM DIN RAIL 26.000 LONG 14 3 74-0132-CAP 73-0132 CAP
4 1 30-1264 N BUSBAR 10 MM X 3 MM X 12.00 IN LONG 15 2 74-0133 SIEMENS IPM25 CONVERTER POWER MODULE 2.2 kW D
D 5 1 30-1265 FEEDER TERMINAL FOR N BUSBAR-4 AWG 16 1 74-0134 SIEMENS TERMINAL MODULE WITHOUT FEEDER TERMINAL
6 1 30-1455 AB SWITCH BODY 194E-A32-1753 17 1 74-0135 SIEMENS TERMINAL MODULE WITHOUT FEEDER TERMINAL
7 1 74-0127 SIEMENS TERMINATING. MODULE 18 1 74-0136 SIEMENS IPM25 CONVERTER POWER MODULE 0.75 kW
8 1 74-0128 SIEMENS POWER MODULE TERMINAL-SAFETY 19 2 74-0137 SIEMENS M15-L123 BRIDGE BLOCK
9 1 74-0128-TC TERMINATING COVER (SUPPLIED WITH 74-0128) 20 3 74-0139 SIEMENS MICRO MEMORY CARD FOR ICU24
10 1 74-0129 SIEMENS POWER MODULE-SAFETY 21 1 74-0145 SIEMENS IM 151-3PN HF INTERFACE MODULE
11 3 74-0130 SIEMENS CONTROL UNIT TERMINAL MODULE 22 1 74-0146 SIEMENS 64KB MICRO MEMORY CARD-IM 12
30-1211 1 REQ'D 5FT LONG ETHERNET CABLE
TO 30-0940 ETHERNET SWITCH SHOWN 12 18
ON 00-2910 UPPER DIN RAIL ASSEMBLY 20 20
12 15
20 15 10 C
C 15
12 12
15 20
20 3
12 18
5
10 4
20
22 5
4
21 21 B
14
B SUPPLIED WITH
74-0132 8
9 11
13
SUPPLIED WITH
19 17 74-0128
21 16 2 16 11
19
6
8 11
13
7 17 11
1
3 SUPPLIED WITH
2 PLC'S 74-0145
SW CHECKED BY DATE
A TM
T.E.W. 12/13/07
GS300 VFD ASSEMBLY A
02 SEE ECN 00-2903-02 05/26/09 KLP R
APPROVED BY DATE
00-2903-02

1:3.25 D0 NOT SCALE
4 3 2 1

NO. NUMBER
1 1 25-0145 AB 3 PHASE, 480 VAC, 24VDC, 10A POWER SUPPLY
2 1 30-0169 DIN RAIL
3 9 30-0170 WAGO 6MM SCREWLESS END BLOCK 249-116
D D
4 2 30-0928 AB INTER/ISOL RELAY 700-HLT1Z24
9
5 1 30-0940 ETHERNET SWITCH 5 PORT GROUND
6
6 31 30-1114 TERMINAL BLOCK-4 POLE GREY
WIRE #603 6
7 9 30-1115 TERMINAL BLOCK-4 POLE BLUE 6
8 22 30-1116 TERMINAL BLOCK COVER-4 POLE GREY SPARE
6 WIRE #101
9 6 30-1117 TERMINAL BLOCK-GROUND 4 POLE WIRE #604 2 REQ'D 6
SPARE
10 7 30-1118 TERMINAL BLOCK-JUMPER 2 POLE 6
13 6 6
11 3 30-1120 JUMPER-TERMINAL BLOCK-5 POLE SUPPLIED WIRE #102
WIRE #605 2 REQ'D SPARE
12 1 30-1166 SIEMENS SITOP POWER-STANDARD 24 V WITH 30-1166
13 4 30-1185 FUSE-15A BLADE TYPE 9 6 6 C
C 4 GROUND WIRE #103
2 PLC'S 4 REQ'D 5 REQ'D SPARE
6 1
WIRE #14 9 7 8
6
GROUND WIRE #100 19 REQ'D
9 REQ'D WIRE #104
6 2 REQ'D
WIRE #12 3
A 6 REQ'D
B
C
2 B
B
3
3 10
10 6
8 3 12 11 11 10 10 11 10 10 SPARE
6 10 6
WIRE #831 WIRE #834 6
5 2 REQ'D
2 REQ'D SPARE
A- CABLE 30-1052 FROM 73-0107 OPERATOR INTERFACE ASSY (74-0111 HMI CONNECTION)
B- CABLE 30-1193 FROM 00-2902 CONTROLLER RAIL ASSY (74-0119 PLC CONNECTION) 6 6
C- CABLE 30-1211 FROM 00-2903 VFD ASSEMBLY (74-0145 INTERFACE MODULE) WIRE #832 WIRE #833 6
EACH CABLE CAN BE PLUGGED INTO ANY OF THE FIVE PORTS 2 REQ'D 2 REQ'D SPARE
SW CHECKED BY
T.E.W. 12/13/07
DATE
UPPER DIN RAIL ASSEMBLY A

A TM
APPROVED BY DATE
R
00-2910-01

1:2 D0 NOT SCALE
4 3 2 1
NO. NUMBER
1 1 30-0169 DIN RAIL 18.000 LONG
2 8 30-0170 ANCHOR-END SCREWLESS DIN RAIL
3 2 30-0921 CIRCUIT BREAKER-480V 2P
4 2 30-0936 CONTACTOR-MINI DC 9A D
D
5 1 30-0938 CONTACTOR-3P DC OPER 1 NO AND 4 NC
6 4 30-1058 SIEMENS SOLID STATE CONTACTOR 3RF2
7 15 30-1114 TERMINAL BLOCK-4 POLE GRAY
8 11 30-1116 COVER-TERMINAL BLOCK-4 POLE GRAY
9 1 30-1117 TERMINAL BLOCK-GROUND 4 POLE
10 5 30-1118 JUMPER-TERMINAL BLOCK-2 POLE 9 7
GROUND WIRE #7
2 REQ'D
7
7 7
WIRE #31
WIRE #32 WIRE #8
2 REQ'D C
C 7 2 REQ'D
7 7
SPARE
WIRE #34 WIRE #30 7
2 REQ'D 6 6 6
2 6 WIRE #9
7 2 REQ'D
7 3 2 2
SPARE 2 4
WIRE #33 2 4 5
2
2
B
B
2
10 10 8 8 8 10
8
8
10
SW CHECKED BY
T.E.W. 12/13/07
DATE
LOWER DIN RAIL ASSEMBLY A

A TM
02 SEE ECN 00-2911-02 08/19/10 CDS R

APPROVED BY DATE
00-2911-02

1:1.5 D0 NOT SCALE
4 3 2 1
ITEM PART
QTY DESCRIPTION
NO. NUMBER
1 1 21-0514 VALVE-LOX 1-1/2 THD PORTS
2 1 28-0881 1-1/2 NPT FULL COUPLING SST
3 1 28-0883 1-1/2 NPT MUFFLER ALUM
4 1 28-0885 1-1/2 NPT X 90 DEG STREET ELBOW SST D
5 1 28-0889 1-1/2 x 1 NPT REDUCING BUSHING SST
6 1 28-0892 1-1/2 X 90 DEG ELBOW SST
D 7 2 28-0913 1-1/2 X 18 PIPE SST
8 1 28-0914 1-1/2 X 24 PIPE SST
5
10 2 29-0236 M12 X 90 MM LG HH SST DIN 931
11
12
10
C P/N 32-2641 FROM C

GS15-300 FRAME, 07-0334
SHOWN FOR REFERENCE ONLY
6 3
A A
SW
CHECKED BY DATE
03 SEE ECN 00-2956-03 04/20/09 ST TM

S. GRIGGS 11/26/07 MAIN AIR SHUTOFF PIPING ASM.
02 SEE ECN 00-2956-02 03/17/09 ST R APPROVED BY DATE
S. GRIGGS 11/26/07
01 SEE ECN 00-2956-01 01/07/08 JEH SIZE PART NO.
00-2956-03


DRAWING
SHEET 1 of 1
4 3 2 1
ITEM PART
QTY DESCRIPTION
NO. NUMBER
1 2 10-4569 MANIFOLD BRACKET
3 2 21-0223 VALVE-1/4 PORTED
4 1 21-0491 GATE CYLINDER MANIFOLD BLOCK D
D 7 1 28-0186 PLFTG-MALE ELBOW 12MM-3/8BSPT
11 1 28-0480 PLFTG-MALE RUN TEE 8MM-1/4BSPT 18
3
13 4 28-0870 1/4 SILENCER SST
1
14 1 28-0873 PLFTG-MALE ELBOW 45 DEG 12MM-3/8BSPT
15 4 29-0668 M6 X 12 MM LG HH SST DIN 933
16 4 29-0875 M4 X 35 MM LG SH SST
17 2 29-0878 M4 X 50 MM LG SH SST
18 2 62-0045 2-014 O-RING .070 X .629 OD
19 1 62-2731 2-017 O-RING .070 X .816 OD
C C
8
10
2 PLACES
11 9
16 15
4 PLACES 4 PLACES
B
12 2
B 13
4 PLACES
9
6
4
19
14
17 9
A A
04 SEE ECN 21-0492-03 01-23-09 ST

SW
CHECKED BY DATE
04 SEE ECN 21-0492-03 01-23-09 ST TM

S. GRIGGS 8/14/07 GATE CYLINDER MANIFOLD ASSY.
02 SEE ECN 21-0492-02 10/31/07 JEH R APPROVED BY DATE
S. GRIGGS 8/14/07
05 SEE ECN 21-0492-05 03/17/09 ST SIZE PART NO.
21-0492-05

REVISIONS J. HITE 4/30/07 J. HITE 8/14/07 SCALE 1:1.5 D0 NOT SCALE

DRAWING
SHEET 1 of 1
4 3 2 1
ITEM PART
19 QTY DESCRIPTION
NO. NUMBER
22 1 28-0677 1 1/2 NPT HEX HEAD PIPE PLUG SST
2
BOX PURGE 2 28-0716 2 3/8 SQUARE HEAD PLUG SST
PORTS
3 30-0833 1 PUSHBUTTON-ESTOP 2 POS TWIST TO REL
D D
4 30-0833-NUT 1 30-0833 NUT
5 30-0834 3 LATCH-22.5MM PUSH BUTTON
19 6 30-0835 1 CONTACT BLOCK-22.5MM PUSHBUTTON
7
7 30-0836 3 CONTACT BLOCK-NO LOW VOLTAGE
5
16 6 8 30-0840 1 PUSHBUTTON-FLUSH MOMENTARY CLEAR
7 10
9 30-0840-NUT 1 30-0840 NUT
10 30-0841 1 MODULE-24V PB RED INTEGRATED LED
12 11 30-0845 1 MODULE-24V PB BLUE INTEGRATED LED
12 30-0889 1 CONTACT BLOCK-DUAL CKT 1NO/1NC
18 13 30-1169 1 FLEX CONDUIT FITTING - 3/4 STR C
C 11
4 5 14 30-1170 1 FLEX CONDUIT-3/4 PLST COVER
7
5 15 30-1179 1 PUSHBUTTON-DOUBLE RED(EXT) & GREEN(FL)
9 16 30-1179-NUT 1 30-1179-NUT
17 53-0223 1 OPERATOR INTERFACE ENCLOSURE WELDMENT
20 18 74-0111 1 SIEMENS TOUCH SCREEN
21 19 74-0111A 6 SIEMENS TOUCH SCREEN FASTENER
20 74-0152 1 USB MEMORY 2 GB
21 99-0163 1 A-B EMERG. STOP LEG.
B
22 99-1017 1 CORROSION FOAM INHIBITOR
B
1 17 NOTES: 1) PLACE CORROSION INHIBITOR 99-1017 IN UPPER RIGHT CORNER
SPARE OF BOX, ON THE SIDE WALL. IT SHOULD BE REPLACED ONCE A YEAR.
15 13 2) PLACE DESICCANT BAG 99-1020 IN THE BOTTOM OF THE BOX.
IT SHOULD BE REPLACED EVERY 6 MONTHS OR IF THERE IS EVIDENCE
3 OF MOISTURE IN THE BOX.
14
3 FEET 3) PART NUMBER 99-1019 IS A NON-FLAMMABLE CLEANER AND
8 LONG PROTECTANT. IT SHOULD BE SPRAYED INTO THE BOX JUST PRIOR
TO SHIPMENT.
CABLE 30-0517 4 FEET REQ'D (PUSH BUTTONS)
CABLE 30-1052 1 REQ'D (ETHERNET CABLE)
03 SEE ECN 73-0107-03 CDS

SW CHECKED BY
T.E.W. 11/26/07
DATE
GS+RC OPERATOR A
INTERFACE ASEMBLY
02/18/10
A TM
02 SEE ECN 73-0107-02 03/27/09 KLP R

APPROVED BY DATE
73-0107-03

1:5 D0 NOT SCALE
7 6 5 4 3 2 1
8
ITEM PART ITEM PART NOTES: 1) PLACE CORROSION INHIBITOR EMITTER CUP 99-1018
NO. NUMBER NO. NUMBER IN UPPER RIGHT CORNER OF BOX,ON THE SIDE WALL.
1 1 28-0651 3/4 X 1/2 REDUCER BUSHING SST 12 1 30-0490 CORD-ELECTRICAL 10-4 IT SHOULD BE REPLACED ONCE A YEAR.
2 1 28-0659 1/4 SQUARE HEAD PLUG SST 13 1 30-0720 GRIP-CORD .75 NPT .51/.71 DIA 2) PLACE SILICA GEL DESICCANT BAG 99-1021 IN THE BOTTOM
3 1 28-0677 1/2 NPT HEX HEAD PIPE PLUG SST 14 1 30-0885-HANDLE AB ROTARY DOOR MOUNT HANDLE OF THE BOX. IT SHOULD BE REPLACED EVERY 6 MONTHS
OR IF THERE IS EVIDENCE OF MOISTURE IN THE BOX.
4 2 28-0716 3/8 SQUARE HEAD PLUG SST 15 1 30-0963 CONN-BULKHEAD 8 COND MALE/FEMALE SST 3) PART NUMBER 99-1019 IS A NON-FLAMMABLE CLEANER
5 3 28-0739 3/4 NPT HEX HEAD PIPE PLUG SST 16 1 30-0990 CAP-MALE EUROFAST CLOSURE SST AND PROTECTANT. IT SHOULD BE SPRAYED INTO THE
6 4 29-0705 M10 X 20 MM LG HH SST DIN 933 17 2 30-1169 FLEX CONDUIT FITTING - 3/4 STR BOX JUST PROR TO SHIPMENT.
7 1 29-1126 M4 HEX NUT SST 17 7 30-1177 FLEX CONDUIT FITTING-1/2 90 DEG ELBOW
8 1 29-1169 M4 ACORN CAP NUT SST DIN 1587 19 3 30-1190 FLEX CONDUIT FITTING-3/4 45 DEG ELBOW
9 8 29-9424 3/8-16 HEX NUT SST 20 1 53-0302 GS300 ELECTRICAL CONTROL BOX WELDMENT
D 21 1 73-0109 GS300 ELECTRICAL PANEL ASSEMBLY D
10 2 30-0234 CONN-CORD .38 LIQ TIGHT
11 4 30-0286 RECEPTACLE-PROX WIRE 22 12 99-1185 10MM ID FLAT WASHER SST
ADD PANEL COMPONENT

20 IDENTIFICATION LABEL 99-0963
TO THE INSIDE FACE OF ENCLOSURE
22 20 DOOR AT THIS LOCATION. 6 22
6 4 PLC'S 20
16 8 7 19 30-1170 3/4 FLEX CONDUIT

8 4 FEET REQUIRED
16 30-1196 CABLE-34 COND
15 11 20 AWG 8 FEET REQUIRED
PLUG THIS PORT WHICH RUNS TO THE 19
WHEN NOT IN UES PNEUMATIC CONTROL BOX
19 11
TRANSITION TRAY
SENSOR RECEPTACLE C
C 15
PROGRAMMING
PORT
19
5
30-1170 3/4 FLEX CONDUIT
3 FEET REQUIRED WHICH
RUNS TO THE OPERATOR 13 13
? INTERFACE ENCLOSURE
NOT SUPPLIED WITH MACHINE.
30-1010 PLUG TO BE USED FOR
5 TESTING THE MACHINE AND
SPARE REMOVED BEFORE SHIPPING
PORT
14
17 14
17
B SPLICER
COMUNICATION B
30-1195 1/2 FLEX CONDUIT
10 FEET REQUIRED 12
RUNS TO THE SPLICER 6 FEET
LONG
14
HANDLE SUPPLIED
WITH 30-0885 SHOWN
ON 73-0109 ELECTRICAL
PANEL ASSEMBLY
4
6 BOX PURGE 3
22 3 PORTS A
SPARE
A PORT
03 SEE ECN 73-0108-03 10/28/09 ST

SW CHECKED BY DATE
T.E.W. 12/13/07 GS15-300 ELECTRICAL BOX

ASSEMBLY
TM
02 SEE ECN 73-0108-02 06/23/09 SDG R APPROVED BY DATE

M.POTEAT 12/13/07
01 SEE ECN 73-0108-01 07/09/08 KLP
73-0108-03

K.POLING 12/13/07 K.POLING 12/14/07 1 2
DRAWING SHEET of
7 6 5 4 3 2 1
8
ITEM PART ITEM PART
1 1 28-0651 3/4 X 1/2 REDUCER BUSHING SST 12 1 30-0490 CORD-ELECTRICAL 10-4
2 1 28-0659 1/4 SQUARE HEAD PLUG SST 13 1 30-0720 GRIP-CORD .75 NPT .51/.71 DIA
3 1 28-0677 1/2 NPT HEX HEAD PIPE PLUG SST 14 1 30-0885-HANDLE AB ROTARY DOOR MOUNT HANDLE
4 2 28-0716 3/8 SQUARE HEAD PLUG SST 15 1 30-0963 CONN-BULKHEAD 8 COND MALE/FEMALE SST
5 3 28-0739 3/4 NPT HEX HEAD PIPE PLUG SST 16 1 30-0990 CAP-MALE EUROFAST CLOSURE SST
6 4 29-0705 M10 X 20 MM LG HH SST DIN 933 17 2 30-1169 FLEX CONDUIT FITTING - 3/4 STR
7 1 29-1126 M4 HEX NUT SST 18 7 30-1177 FLEX CONDUIT FITTING-1/2 90 DEG ELBOW
8 1 29-1169 M4 ACORN CAP NUT SST DIN 1587 19 3 30-1190 FLEX CONDUIT FITTING-3/4 45 DEG ELBOW
9 8 29-9424 3/8-16 HEX NUT SST 20 1 53-0302 GS300 ELECTRICAL CONTROL BOX WELDMENT 30-1195 1/2 FLEX CONDUIT 3 FEET
D 17 REQUIRED WHICH RUNS TO D
10 2 30-0234 CONN-CORD .38 LIQ TIGHT 21 1 73-0109 GS300 ELECTRICAL PANEL ASSEMBLY
THE BARREL HEATER
11 4 30-0286 RECEPTACLE-PROX WIRE 22 12 99-1185 10MM ID FLAT WASHER SST
20
20
21
30-1195 1/2 FLEX CONDUIT 3 FEET

17 REQUIRED WHICH RUNS RTD WIRES
FROM THE ELECTRICAL JUNCTION BOX
11
10 GLUE TRAY
EXTRUDER PROX
TEMPERATURE RECEPTACLE
PROBE CABLE
11
NOZZLE DOWN
SENSOR
RECEPTACLE
C
C
10 2 11
EXTRUDER SPARE NOZZLE UP
TRANSMITTER PORT SENSOR
CABLE RECEPTACLE
17
REQUIRED WHICH RUNS TO
THE NOZZLE BLOCK HEATER
17
REQUIRED WHICH RUNS TO
THE EXIT BLOCK HEATER
B 17
30-1195 1/2 FLEX CONDUIT 3 FEET REQUIRED B
WHICH RUNS NOZZLE HOSE HEATER WIRES
FROM THE ELECTRICAL JUNCTION BOX
5 5
SPARE SPARE
PORT PORT 19
9 17 REQUIRED WHICH RUNS TO THE
4 PLC'S 30-1170 3/4 FLEX CONDUIT 6 FEET 17 GLUE EXTRUDER DRIVE MOTOR
REQUIRED WHICH RUNS TO THE 30-1170 3/4 FLEX CONDUIT 2 FEET
TABLE DRIVE MOTOR REQUIRED WHICH RUNS TO THE A
A VACUUM BELT DRIVE MOTOR
NOTE: 30-1250 14 AWG VFD CABLE
APPROXIMATELY 20 FEET USED TO
WIRE THE THREE MOTORS
SW CHECKED BY DATE
T.E.W. 12/13/07 GS15-300 ELECTRICAL BOX

TM
R APPROVED BY DATE ASSEMBLY

M.POTEAT 12/13/07
73-0108-03
K.POLING 12/13/07 K.POLING 12/14/07 2 2

DRAWING SHEET of
7 6 5 4 3 2 1
8
ITEM QTY PART DESCRIPTION 1
NO. NUMBER
1 1 00-2902 GS300 CONTROLLER RAIL ASSEMBLY
2 1 00-2903 GS300 VFD ASSEMBLY
3 1 00-2910 UPPER DIN RAIL ASSEMBLY

19 6
4 PLC'S 11
4 1 00-2911 LOWER DIN RAIL ASSEMBLY
D D
5 1 00-2958 480/240 TRANSFORMER ASSEMBLY
6 4 29-0667 M6 X 10 MM LG HH SST DIN 933 15

8 PLC'S
7 57 29-1060 M5 X 10 MM LG BH SST 3
8 2 30-0638 PANDUIT DUCT 1.5W X 2H X 32.000 LG

14
9 1 30-0884 CIRCUIT BREAKER-15A MOLDED CASE
14
10 1 30-0885 MOUNTING KIT-ROTARY THRU THE DOOR 8
11 1 30-1092 PANDUIT DUCT 2W X 2H X 32.000 LG
12 1 30-1092 PANDUIT DUCT 2W X 2H X 27.000 LG
9 C
C 13 2 30-1092 PANDUIT DUCT 2W X 2H X 24.000 LG
4 8
14 2 30-1092 PANDUIT DUCT 2W X 2H X 5.500 LG CUT SHAFT 5.625
5 LONG OAL
15 8 30-1182 BUSHING-1.109 KNOCKOUT
16 3 30-1183 BUSHING-1.375 KNOCKOUT

17
17 1 30-1184 HANDLE-INTERNAL ROTARY NFPA
18 1 53-0304 GS300 ELECTRICAL BOX PANEL
10
13
12
B
B
16 7
3 PLC'S 57 PLC'S
13
18
A
A
03 SEE ECN 73-0109-03 07/15/10 CDS

SW CHECKED BY DATE
T.E.W. 12/13/07 GS300 ELECTRICAL PANEL

ASSEMBLY
TM
02 SEE ECN 73-0109-02 05/26/09 KLP R APPROVED BY DATE

M.POTEAT 12/13/07
01 SEE ECN 73-0109-01 07/09/08 KLP
73-0109-03

K.POLING 11/30/07 K.POLING 12/14/07 1 1
REVISIONS SCALE 1:2.5 D0 NOT SCALE
DRAWING SHEET of
7 6 5 4 3 2 1
8
Explod Explod
ITEM e PART ITEM e PART
DESCRIPTION DESCRIPTION
NO. #1/QTY NUMBER NO. #1/QTY NUMBER
. .
1
2
1
1
01-0977
01-0978
VALVE NUT PLATE
MANIFOLD BACK PLATE
23
24
1
1
28-0886
28-0893
1-1/2 NPT X 3.5LG PIPE NIPPLE SST
TUBING-1-1/2 ID X 2 OD WHITE EVA
SEE PAGE #3 FOR SOME ASSEMBLY INSTRUCTIONS
3 1 21-0509 PANEL MOUNT MANIFOLD ASSEMBLY- 8 STATION 25 1 28-0894 1-1/2 BARB X 1-1/2 NPT NYLON MALE
4 1 21-0511 VALVE-MAIN POWER AIR 1 PLUS MANIFOLD 26 1 28-0895 1-1/2 BARB X 1-1/2 NPT NYLON MALE ELB
5 1 21-0543 BLOWGUN - 12 IN 27 2 28-0903 1 X 12 LG HOSE TYP. UNLESS
6 2 28-0031 1/4 NPT MUFFLER PLASTIC 28 1 28-0915 1-1/2 NPT SWIVEL STEEL 10 OTHERWISE
7 3 28-0179 PLFTG-MALE ELBOW 10MM-1/4BSPT 29 2 28-0916 1 NPT SWIVEL STEEL SHOWN 9 11
D 8 8 28-0194 PLFTG-MALE CONN 10MM-1/4BSPT 30 1 28-0941 POWER AIR MANIFOLD D
9 3 28-0198 PLFTG-MALE CONN 6MM-1/8BSPT 31 6 29-0653 M5 X 16 MM LG HH SST DIN 933
10 13 28-0303 PLFTG-MALE CONN 4MM-1/8BSPT 32 4 29-0815 M10 X 25 MM LG HH SST DIN 931
11 1 28-0321 PLFTG-PLUG 4MM 33 15 29-1060 M5 X 10 MM LG BH SST
12 1 28-0335 PLFTG-MALE ELBOW 10MM-1/2BSPT 34 2 29-1297 CLAMP-HOSE WORM DRIVE 2 INCH DIA
13 1 28-0392 1/4 STREET TEE SST 35 1 30-0169 DIN RAIL 7.500 LONG
14 1 28-0570 1/4 SELF RETRACTING HOSE 36 3 30-0170 ANCHOR-END SCREWLESS DIN RAIL
15 1 28-0646 1/2 NPT MALE BRANCH TEE SST 37 2 30-0242 CONN-CORD 90 DEG .50 LIQ TIGHT .25/.40
16 2 28-0655 1/4 PIPE COUPLING SST 38 1 30-0291 25 POLE JUNCTION MODULE #289-457
17 1 28-0658 1/2 X 1/4 REDUCER BUSHING SST 39 4 30-0961 DUCT-WIRE 1.5W X 2H X 78.00 W/COVER
18 3 28-0659 1/4 SQUARE HEAD PLUG SST 40 11 30-1114 TERMINAL BLOCK-4 POLE GRAY
19 2 28-0716 3/8 SQUARE HEAD PLUG SST 41 2 30-1115 TERMINAL BLOCK-4 POLE BLUE 9
20 1 28-0883 1-1/2 NPT MUFFLER ALUM 42 1 30-1117 TERMINAL BLOCK-GROUND 4 POLE
21 1 28-0884 1-1/2 NPT CLOSE NIPPLE SST 43 3 30-1122 TERMINAL BLOCK-4 POLE GRAY DIODE
22 1 28-0885 1-1/2 NPT X 90 DEG STREET ELBOW SST 44 3 30-1161 ROSS DM2 ELECTRICAL CONN W/2M CABLE 9
45 1 30-1190 FLEX CONDUIT FITTING-3/4 45 DEG ELBOW
46 1 30-1450 SWITCH-PRESSURE 35/100 PSI VIEW SHOWING AIRLINE
47 1 53-0229 RC PNEUMATIC BOX WELDMENT BULKHEAD FITTING LOCATIONS
48 1 53-0230 PNEUMATIC PANEL
C
C CONDUIT CONNECTION
FROM MAIN CONTROL BOX
23 45 7 47
AIR OUT TO
REGULATOR/LUBRICATOR
UNITS
2
30
31
6 PLACES
B
B
AIR IN FROM AIR

PREP UNITS CABLE FROM TABLE
POSITION SENSOR
37
15 CABLE FROM CLIPPER SENSING PROX
17
19 19 12
5 BACK RIGHT ISOMETRIC VIEW

8
28
20 21 A
A 22 16
6
14 04
03
SEE ECN 73-0115-04
SEE ECN 73-0115-03
08/20/09
04/20/09
ST
ST
SW CHECKED BY DATE
J.HITE 11-16-07 ROTA-CLIP PNEUMATIC BOX ASSY

TM
02 SEE ECN 73-0115-02 03/18/09 ST APPROVED BY DATE
FRONT LEFT ISOMETRIC VIEW

R
S.GRIGGS 11-16-07
01 SEE ECN 73-0115-01 03/03/09 ST
73-0115-04

S.GRIGGS 11-16-07 S.GRIGGS 11-16-07 1 3
DRAWING SHEET of
7 6 5 4 3 2 1
8
ITEM PART
QTY DESCRIPTION
NO. NUMBER
1 1 01-0977 VALVE NUT PLATE 1
2 1 01-0978 MANIFOLD BACK PLATE
3 1 21-0509 PANEL MOUNT MANIFOLD ASSEMBLY- 8 STATION
4 1 21-0511 VALVE-MAIN POWER AIR 1 PLUS MANIFOLD 35
5 1 21-0543 BLOWGUN - 12 IN
6 2 28-0031 1/4 NPT MUFFLER PLASTIC 36
D D
11 1 28-0321 PLFTG-PLUG 4MM
13 1 28-0392 1/4 STREET TEE SST
14 1 28-0570 1/4 SELF RETRACTING HOSE
15 1 28-0646 1/2 NPT MALE BRANCH TEE SST
36 7.5
16 2 28-0655 1/4 PIPE COUPLING SST
17 1 28-0658 1/2 X 1/4 REDUCER BUSHING SST 42
18 3 28-0659 1/4 SQUARE HEAD PLUG SST
19 2 28-0716 3/8 SQUARE HEAD PLUG SST 41
22 1 28-0885 1-1/2 NPT X 90 DEG STREET ELBOW SST 40
23 1 28-0886 1-1/2 NPT X 3.5LG PIPE NIPPLE SST
24 1 28-0893 TUBING-1-1/2 ID X 2 OD WHITE EVA
25 1 28-0894 1-1/2 BARB X 1-1/2 NPT NYLON MALE 43
26 1 28-0895 1-1/2 BARB X 1-1/2 NPT NYLON MALE ELB
40
27 2 28-0903 1 X 12 LG HOSE 43 44 4 44
40 4 PLACES
C 29 2 28-0916 1 NPT SWIVEL STEEL 43 32 C
30 1 28-0941 POWER AIR MANIFOLD 40
31 6 29-0653 M5 X 16 MM LG HH SST DIN 933 36
32 4 29-0815 M10 X 25 MM LG HH SST DIN 931 01-0997 IS A NUT PLATE
33 15 29-1060 M5 X 10 MM LG BH SST ON THE BACK OF THE PANEL
34 2 29-1297 CLAMP-HOSE WORM DRIVE 2 INCH DIA DETAIL A USED TO MOUNT THE VAVLE
35 1 30-0169 DIN RAIL 7.500 LONG SCALE 1 : 1
1
37 2 30-0242 CONN-CORD 90 DEG .50 LIQ TIGHT .25/.40
48
38 1 30-0291 25 POLE JUNCTION MODULE #289-457 33
39 4 30-0961 DUCT-WIRE 1.5W X 2H X 78.00 W/COVER 15 PLACES
40 11 30-1114 TERMINAL BLOCK-4 POLE GRAY
41 2 30-1115 TERMINAL BLOCK-4 POLE BLUE
43 3 30-1122 TERMINAL BLOCK-4 POLE GRAY DIODE
44 3 30-1161 ROSS DM2 ELECTRICAL CONN W/2M CABLE
47 1 53-0229 RC PNEUMATIC BOX WELDMENT 39
B
B
8.0
8.0
A 8.0 39
A
A 39 44
39
SW CHECKED BY DATE

TM
R APPROVED BY DATE
S.GRIGGS 11-16-07
73-0115-04

S.GRIGGS 11-16-07 S.GRIGGS 11-16-07 2 3
DRAWING SHEET of
7 6 5 4 3 2 1
8
ITEM PART
QTY DESCRIPTION
NO. NUMBER
** THE BOX DOOR HAS BEEN HIDDEN AND THE BOX HAS BEEN
1 1 01-0977 VALVE NUT PLATE
2 1 01-0978 MANIFOLD BACK PLATE
SECTIONED TO PROVIDE A BETTER VIEW OF INTERNAL PARTS **

3 1 21-0509 PANEL MOUNT MANIFOLD ASSEMBLY- 8 STATION
4 1 21-0511 VALVE-MAIN POWER AIR 1 PLUS MANIFOLD
5 1 21-0543 BLOWGUN - 12 IN
D
10 13 28-0303 PLFTG-MALE CONN 4MM-1/8BSPT 18 D
11 1 28-0321 PLFTG-PLUG 4MM
12 1 28-0335 PLFTG-MALE ELBOW 10MM-1/2BSPT SEE NOTE #6 3
13 1 28-0392 1/4 STREET TEE SST 8 13
14 1 28-0570 1/4 SELF RETRACTING HOSE 8
15 1 28-0646 1/2 NPT MALE BRANCH TEE SST 27
16 2 28-0655 1/4 PIPE COUPLING SST 29
17 1 28-0658 1/2 X 1/4 REDUCER BUSHING SST 8 8
23 1 28-0886 1-1/2 NPT X 3.5LG PIPE NIPPLE SST
24 1 28-0893 TUBING-1-1/2 ID X 2 OD WHITE EVA
25 1 28-0894 1-1/2 BARB X 1-1/2 NPT NYLON MALE
26 1 28-0895 1-1/2 BARB X 1-1/2 NPT NYLON MALE ELB
27 2 28-0903 1 X 12 LG HOSE
29 2 28-0916 1 NPT SWIVEL STEEL C
C
30 1 28-0941 POWER AIR MANIFOLD
31 6 29-0653 M5 X 16 MM LG HH SST DIN 933
32 4 29-0815 M10 X 25 MM LG HH SST DIN 931
33 15 29-1060 M5 X 10 MM LG BH SST 46
34 2 29-1297 CLAMP-HOSE WORM DRIVE 2 INCH DIA
35 1 30-0169 DIN RAIL 7.500 LONG
37 2 30-0242 CONN-CORD 90 DEG .50 LIQ TIGHT .25/.40
38 1 30-0291 25 POLE JUNCTION MODULE #289-457
39 4 30-0961 DUCT-WIRE 1.5W X 2H X 78.00 W/COVER
40 11 30-1114 TERMINAL BLOCK-4 POLE GRAY 25
41 2 30-1115 TERMINAL BLOCK-4 POLE BLUE
43 3 30-1122 TERMINAL BLOCK-4 POLE GRAY DIODE
44 3 30-1161 ROSS DM2 ELECTRICAL CONN W/2M CABLE
34
47 1 53-0229 RC PNEUMATIC BOX WELDMENT
B
24 B
34
Assembly Instructions:
1. Mount panel with nuts supplied with box 26
2. Mount the main power valve, 21-0511, loosely to
the panel before placing the panel into the box.
3. Leave the main power valve, 21-0511, loose until
hoses are connected and then tighten valve
bolts. A
A 4. Remove valve exhuast block and connect
exhuast tube on barbs and then reconnect
exhaust block to the valve.
5. Ensure oring is in place when mounting 21-0509 SW CHECKED BY DATE

6. 30-1194 cable needed to connect panel
TM
R APPROVED BY DATE
S.GRIGGS 11-16-07
manifold to din rail junction module. 73-0115-04

S.GRIGGS 11-16-07 S.GRIGGS 11-16-07 3 3
DRAWING SHEET of
15.5
RC12-18
Assemblies
4 3 2 1
ITEM PART
QTY DESCRIPTION
NO. NUMBER
1 1 00-2929 CENTER COLUMN HOUSING ASM
2 1 00-2930 CENTER COLUMN SPINDLE ASM
3 1 21-0493 ROTARY MANIFOLD OUTER HOUSING
4 1 28-0536 ROTARY MANIFOLD INNER HOUSING DUAL SUPPLY 4
5 1 28-0921 GREASE FTG STRAIGHT-1/8 NPT-SST
6 1 28-9135 1/8 ALLEN PIPE PLUG FLUSH MT SST 7 2 PLC'S
7 8 29-0459 M10 X 110 MM LG HH SST DIN 931 4 PLC'S
8 1 32-2617 1/4 SST WASHER DISC 11 8
D 9
10
2
2
39-9000
62-2720
USE 39-9500 1/4 DIAX1/2HDN SST
2-215 O-RING .139 X 1.324 OD
9 2 PLC'S D
11 4 62-2752 2-349 O-RING .210 X 4.895 OD 6 PLC'S 7
2 PLC'S 10
C
C
B
B
SW CHECKED BY
GRIGGS 10/23/07
DATE
RC12-18 COLUMN ASSY A

A TM
02 SEE ECN 00-2947-02 03/18/09 ST R

APPROVED BY DATE
01 SEE ECN 00-2947-01 01/27/09 ST GRIGGS 10/23/07 SIZE PART NO.
00-2947-02
REVISIONS LOWDER 10/23/07 LOWDER 10/23/07 SCALE

1:12 D0 NOT SCALE
4 3 2 1
ITEM PART
QTY DESCRIPTION
NO. NUMBER
1 1 10-3621 MT BRACKET FOR SMC NAL3000
2 2 10-4644 FRL T-BRACKET
3 1 21-0364 VALVE-3 PORT 3/8 PORTS AIR PILOTED
4 1 24-0036 SMC NAL3000-N03-38 LUBRICATOR 17 D
5 2 24-0059 SMC AL60-10-38 LUBRICATOR
6 2 24-0064 SMC AR6000-10 REGULATOR 6
D 7 1 28-0186 PLFTG-MALE ELBOW 12MM-3/8BSPT
23
14 11
10 2 28-0334 PLFTG-MALE ELBOW 6MM-3/8BSPT 18-0366 FROM 07-0338 TABLE WELDMENT
SHOWN FOR REFERENCE ONLY
7
13 1 28-0650 1/2 X 3/8 HEX REDUCING NIPPLE SST
14 2 28-0653 1/4 NPT 90 DEG STREET ELBOW SST
15 1 28-0856 3/8 NPT SILENCER SST 22
16 2 28-0879 1 X 90 DEG STREET ELBOW SST
24 3
18 1 28-0952 3/8 STREET TEE SST 5
17
15
C 20 2 29-0723 M12 X 55 MM LG HH SST DIN 933 C
21 2 29-0868 M4 X 10 MM LG SH SST
23 2 31-1159 GAUGE-0-160 PSI 2.00 IN 1/4 NPT 9
24 2 99-1248 12MM ID LOCK WASHER SST 13
18
21 20
2
16
1 B
6
B 17 19
14
10
2 23
4 10 16
A 17 A
04 SEE ECN 00-2954-04 SDG

SW
CHECKED BY DATE
04/08/09
03 SEE ECN 00-2954-03 03/17/09 ST TM
S. GRIGGS 11/13/07 RC12-18 FRL ASSEMBLY
05 SEE ECN 00-2954-05 3/3/10 TEW S. GRIGGS 11/13/07 SIZE PART NO.
00-2954-05


DRAWING
SHEET 1 of 1
15.6
GS15-300
Assemblies
7 6 5 4 3 2 1
8
ITEM PART DESCRIPTION QTY.
NO. NUMBER USE 28-0521 3 FEET
1 21-0323 PNEUMATIC VACUUM GENERATOR 1 3/4 VACUUM HOSE.
2 27-0006 CANISTER-FILTER 2 CONNECT TO 00-1419
REAR VACUUM DRIVE 3
3 28-0186 PLFTG-MALE ELBOW 12MM-3/8BSPT 1 ASSEMBLY
4 28-0346 3/4BARB X 3/4NPT NYLON 90 DEG EL 2
5 28-0491 3/4 HEX NIPPLE SST 2 6
D
6 28-0684 CLAMP-1.125 IN HOSE SST 2
7 D
7 29-0688 M8 X 20 MM LG HH SST DIN 933 2 2
5
7
4
C
5 C
5
2
REPLACEMENT
FILTER ELEMENT
P/N 27-5500
USE 28-0521 3 FEET
3/4 VACUUM HOSE.
CONNECT TO 00-1418
FRONT VACUUM DRIVE ASSEMBLY
A A
04
03
SEE ECN 00-1422-04
SEE ECN 00-1422-03
03/26/10
05/06/04
CDS
ST
SW CHECKED BY DATE
K.POLING 6/10/02 PNEUMATIC VACUUM GENERATOR ASSY

TM
02 SEE ECN 00-1422-02 5-06-04 ST R APPROVED BY DATE
05 ST E.BRINSON 6/11/02
SEE ECN 00-1422-05 07/26/10 01 SEE ECN 00-1422-01 9/9/02 KLP
00-1422-05
DESCRIPTION DATE APPROVED DESCRIPTION DATE APPROVED DRAWN BY DATE RELEASED BY DATE
NO. ZONE NO. ZONE
REVISIONS I.TOMS 1/21/02 K.POLING 6/11/02 SCALE 1:1 D0 NOT SCALE

4 3 2 1
ITEM PART QTY 26

DESCRIPTION 15
NO. NUMBER 4
1 01-1019 4 JACK SCREW BLOCK
9 4
2 10-2672 2 JACK SCREW BLOCK
3 10-4542 2 IDLER ROLLER MOUNT 26
D 4 10-4575 2 FORMING COLLAR CLAMP BLOCK D
5 10-4576 2 FORMING COLLAR LOCATOR 26
9
6 15-0601 2 FORMING SHOULDER IDLER SHAFT
7 18-0347 1 FORMING SHOULDER MOUNT STIFFENER
26
8 18-0348 1 IDLER STIFFENER BAR 15
9 20-0148 2 M8 X 30MM LG ADJ HANDLE #KHF-680 15 19
10 29-0587 6 M8 X 35 MM LG FH SST
11 29-0672 8 M6 X 25 MM LG HH SST DIN 933
12 29-0691 8 M8 X 35 MM LG HH SST DIN 933
13 29-0708 2 M10 X 35 MM LG HH SST DIN 933 26
14 29-0718 2 M12 X 30 MM LG HH SST DIN 933
15 29-0802 14 M8 X 30 MM LG HH SST DIN 931 C
C 20
16 29-1006 4 M6 X 12MM LG SETSCREW CUPPT SST
17 29-1129 4 M8 HEX NUT SST 15
18 29-1373 4 M8 X 100 MM LG HH SST DIN 933
19 32-2589 1 FORMING SHOULDER MOUNTING PLT
20 32-2592 1 FORMING SHLDR SPRT MTG PLT 5
21 32-2594 1 FORMING SHLDR SPRT MTG PLT
22 37-0177 2 FORMING COLLAR STOP BLOCK 26
23 38-0064 4 WASHER-THRUST .500 X .813 X .094 PLASTIC 26 15
24 38-0370 4 BEARING-BALL .500 X 1.125 X SST
25 57-0780 2 WEB GUIDE IDLER ROLLER 5 B
B 26 99-1184 16 8MM ID FLAT WASHER SST 26
15
27 99-1185 2 10MM ID FLAT WASHER SST
28
14
21
27
13
SW CHECKED BY
TEW 8-13-07
DATE
FORMING SHOULDER A
A
02 SEE ECN 00-2864-02 03/29/10 CDS
TM
R
APPROVED BY DATE SUPPORT ASSEMBLY
01 SEE ECN 00-2864-01 06/10/09 SDG TEW 8-13-07 SIZE PART NO.
00-2864-02
REVISIONS ST 8-07-07 ST 8-13-07 SCALE

1:4 D0 NOT SCALE
4 3 2 1
18 ITEM QTY PART

18 DESCRIPTION
1 NO. NUMBER
1 1 4 01-1019 JACK SCREW BLOCK
12 2 2 10-2672 JACK SCREW BLOCK
3 2 10-4542 IDLER ROLLER MOUNT
D 17 D
17 4 2 10-4575 FORMING COLLAR CLAMP BLOCK
5 2 10-4576 FORMING COLLAR LOCATOR
22 22 6 2 15-0601 FORMING SHOULDER IDLER SHAFT
20 15 12
7 1 18-0347 FORMING SHOULDER MOUNT STIFFENER
26 8 1 18-0348 IDLER STIFFENER BAR
18 19
10 9 2 20-0148 M8 X 30MM LG ADJ HANDLE #KHF-680
10 6 29-0587 M8 X 35 MM LG FH SST
11 8 29-0672 M6 X 25 MM LG HH SST DIN 933
11
12 8 29-0691 M8 X 35 MM LG HH SST DIN 933 C
C 13 2 29-0708 M10 X 35 MM LG HH SST DIN 933
14 2 29-0718 M12 X 30 MM LG HH SST DIN 933
18 15 14 29-0802 M8 X 30 MM LG HH SST DIN 931
3 1
15
12 17 1
26 17 4 29-1129 M8 HEX NUT SST
16
11 2 18 4 29-1373 M8 X 100 MM LG HH SST DIN 933
23
24 19 1 32-2589 FORMING SHOULDER MOUNTING PLT
7
21
20 1 32-2592 FORMING SHLDR SPRT MTG PLT
12 17
21 1 32-2594 FORMING SHLDR SPRT MTG PLT B
16
B 25 22 2 37-0177 FORMING COLLAR STOP BLOCK
2
23 24 4 38-0370 BEARING-BALL .500 X 1.125 X SST
6
24 25 2 57-0780 WEB GUIDE IDLER ROLLER
24
23
11 28 2 99-1186 12MM ID FLAT WASHER SST
25 16
SW
3
8
FORMING SHOULDER
CHECKED BY DATE
6 16 TEW 8-13-07 A
A TM
APPROVED BY DATE SUPPORT ASSEMBLY

R
TEW 8-13-07 SIZE PART NO.

24
00-2864-02
23 DRAWN BY DATE RELEASED BY DATE

11 ST 8-07-07 ST 8-13-07 SCALE
1:4 D0 NOT SCALE
8 7 6 5 4 3 2 1
ITEM PART Default/QTY. DESCRIPTION

NO. NUMBER
1 00-2904 1 GLUE NOZZLE POSITION ASSY 40
2 01-0960 1 PIVOT BLOCK 14
43
3 01-0988 1 UPPER MTNG BLK- PRESSURE ROLL 69
H
H 4 01-0989 1 LOWER MNTG BLK- PRESSURE ROLL
5 04-0542 1 SMC CDG1UA32-125 15
6 04-0543 1 SMC CG-032-24A
7 04-0545 1 SMC RSDQB20-15T 40
8 04-0546 1 CLY-20MM X 25MM SR ALUM
9 04-0547 1 CYLINDER CLEVIS
10 04-0548 1 SMC DBL KNUCKLE JNT Y-020B
11 04-0550 1 DOUBLE KNUCKLE JOINT 43
12 04-0578 1 BIMBA ES-20-13-Q CYLINDER
13 04-0579 1 BIMBA NUT: MN-3 55
14 09-1091 1 GLUE NOZZLE GUARD WELDMENT A
15 09-1092 1 GLUE NOZZLE GUARD WLDMT B G
G
16 10-4579 1 GLUE NOZZLE BLOCK
17 10-4580 1 CYLINDER CLEVIS ATTACHMENT 55
48
18 10-4581 1 UPPER GLUE NOZZLE GUIDE
19 10-4583 1 LOWER GLUE NOZZLE GUIDE
20 10-4584 1 ROLLER CYLINDER MOUNT 48
21 10-4585 1 HOOK CYLINDER MOUNT
22 15-0605 1 FRONT NOZZLE GUIDE SHAFT 23
23 15-0606 1 REAR NOZZLE GUIDE SHAFT
24 16-0867 2 SPACER-.25 RND .75 X .344 SST
18
25 17-0192 1 SPRING-COMP .36 X 1.50 X .029 SST
26 18-0354 1 NOZZLE AND ROLLER SUPPORT
27 22 F
F 27 18-0355 1 STOP CYLINDER SUPPORT
30 7
28 21-0158 2 METER OUT FLOW CONTROL 7665-04-10 40 3 PLC'S
29 28-0216 2 PLFTG-MALE ELBOW 4MM-1/8BSPT 19 24
30 28-0303 1 PLFTG-MALE CONN 4MM-1/8BSPT
26
31 28-0898 1 1/4 FLARE FITTING-PARKER 4-4 FTX-B
32 28-0917 1 MALE STRAIGHT CONN. 3/16 DIA X 18 NPT
33 28-9827 1 1/2 X 3 NIPPLE SST
34 29-0566 1 M6 X 20 MM LG FH SST
35 29-0567 4 M6 X 25 MM LG FH SST
WRAP AROUND THE CONNECTION
36 29-0589 2 M8 X 45 MM LG FH SST (10 FEET) WHEN THE HEATED HOSE
37 29-0634 1 M4 X 14 MM LG HH SST DIN 933 IS ATTACHED.
38 29-0647 1 M5 X 5 MM LG HH SST DIN 933 70 E
E 39 29-0666 2 M6 X 8 MM LG HH SST DIN 933
40 29-0667 7 M6 X 10 MM LG HH SST DIN 933 67 ATTACH ARMOR FLEX TO THE HEATED
41 29-0670 6 M6 X 16 MM LG HH SST DIN 933 11 HOSE WITH CABLE TIES.
42 29-0671 2 M6 X 20 MM LG HH SST DIN 933 51 2 PLC'S
17 78
43 29-0672 4 M6 X 25 MM LG HH SST DIN 933
44 29-0673 4 M6 X 30 MM LG HH SST DIN 933
45 29-0688 2 M8 X 20 MM LG HH SST DIN 933 USE ANTI SEIZE COMPOUND
46 29-0690 4 M8 X 30 MM LG HH SST DIN 933 24-0142 ON FACES SHOWN.
USE 30-1195 FLEXIBLE CONDUIT
47 29-0693 2 M8 X 45 MM LG HH SST DIN 933 31 USE 30-1171 ELECTRIC CABLE
48 29-0706 3 M10 X 25 MM LG HH SST DIN 933
49 29-0707 2 M10 X 30 MM LG HH SST DIN 933 38
65 D
D 50 29-0709 2 M10 X 40 MM LG HH SST DIN 933
51 29-0899 2 M5 X 65 MM LG SH SST 44
80
52 29-0916 1 M6 X 65 MM LG SH SST
4 PLC'S
54 29-0992 2 M5 X 8MM LG SETSCREW CUPPT SST 49 32
56 29-1128 2 M6 HEX NUT SST 35 4 PLC'S 2 PLC'S USE ANTI SEIZE COMPOUND
57 29-1129 1 M8 HEX NUT SST 24-0142 ON FACES SHOWN.
58 29-1295 2 CLAMP-HOSE 1-3/16 TO 1-3/4 DIA
59 29-1331 1 12MM OD X 16MM LG SHLDRSCREW SST
60 30-0784 1 COVER-1/2 CONDUIT BODY
61 30-0790 1 BODY-1/2 CONDUIT TYPE LB ALUM C
C
62 30-0863 2 SWITCH-HALL PNP NO 10/30VDC
63 30-0870 2 CLAMP HOLDER-BLACK PLASTIC 16 66
64 30-1089 2 CA-4 WIRE MALE/FEMALE STR .5M
65 30-1176 1 FLEX CONDUIT FITTING-1/2 STRAIGHT 33
66 30-1187 1 HEATER- 3/8 X 1, 200 WATTS 37
68
67 30-1189 1 TEMP. PROBE-GLUE NOZZLE RTD
68 32-2603 1 NOZZLE GUIDE LOWER PLT 61
69 32-2604 1 NOZZLE GUIDE UPPER PLATE
70 32-2606 1 NOZZLE ADJUSTER LINK PLT 45 48
34 77
71 32-2739 1 FILM DRIVE LABEL PLT 64 60
72 38-0317 1 WASHER-THRUST .564 X 1.000 X .094 BRZ B
B 73 38-0499 1 FILM SEAL ROLLER BRG 50 COAT HEATER WITH WATLUBE
74 38-0510 1 BUSHING- 12MM X 14MM X 15MM LG PRODUCT. FOLLOW THE INSTRUCTIONS
75 39-0409 1 PIN- 6MM X 41MM W/FLATS ON THE BOTTLE. 24-0138
USE TWO 30-1186 WIRE NUTS
76 39-9491 1 PIN-.125 DOWEL 1.500 TO CONNECT HEATER WIRES.
77 40-0140 1 GASKET FOR LB CONDUIT BODY 64
78 40-0141 10 FT FIBERGLASS ROPE SEAL 1/4"
79 99-0859 1 FILM OVERLAP HOOK
1
80 99-0936 1 GLUE NOZZLE - 2 HOLE
A
A
08 SEE ECN 00-2905-08 04/30/09 SDG 04 SEE ECN 00-2905-04 01/16/09 CDS CHECKED BY DATE
07 SEE ECN 00-2905-07 04/21/09 ST 11 SEE ECN 00-2905-03 07/20/10 SDG TIPPER TIE TEW 08-10-07 GLUE NOZZLE ASSEMBLY
06
05
SEE ECN 00-2905-06
SEE ECN 00-2905-05
04/06/09
03/18/09
TEW
ST
10
09
SEE ECN 00-2905-10
SEE ECN 00-2905-09
03/30/10
08/24/09
SMK
ST
TEW
DATE
08-10-07 SIZE PART NO.
ST
DATE
08-10-07
RELEASED BY DATE 00-2905-11
ST 08-10-07 1:1
D0 NOT SCALE
8 7 6 5 4 3 2 1
SEE SHEET 1 FOR NOTES 12
29
ITEM PART SHEET2/QTY. DESCRIPTION
NO. NUMBER 52 H
H
1 00-2904 1 GLUE NOZZLE POSITION ASSY
2 01-0960 1 PIVOT BLOCK
3 01-0988 1 UPPER MTNG BLK- PRESSURE ROLL 56
20
4 01-0989 1 LOWER MNTG BLK- PRESSURE ROLL
5 04-0542 1 SMC CDG1UA32-125
81
6 04-0543 1 SMC CG-032-24A
7 04-0545 1 SMC RSDQB20-15T
8 04-0546 1 CLY-20MM X 25MM SR ALUM 13
9 04-0547 1 CYLINDER CLEVIS
10 04-0548 1 SMC DBL KNUCKLE JNT Y-020B
54
11 04-0550 1 DOUBLE KNUCKLE JOINT 3
54 G
G 12 04-0578 1 BIMBA ES-20-13-Q CYLINDER
13 04-0579 1 BIMBA NUT: MN-3 81 57
14 09-1091 1 GLUE NOZZLE GUARD WELDMENT A
15 09-1092 1 GLUE NOZZLE GUARD WLDMT B 56
16 10-4579 1 GLUE NOZZLE BLOCK
25 REPLACEMENT
17 10-4580 1 CYLINDER CLEVIS ATTACHMENT MUFFLER
18 10-4581 1 UPPER GLUE NOZZLE GUIDE 53 28-0504
19 10-4583 1 LOWER GLUE NOZZLE GUIDE 26
20 10-4584 1 ROLLER CYLINDER MOUNT 81 73
21 10-4585 1 HOOK CYLINDER MOUNT 81
22 15-0605 1 FRONT NOZZLE GUIDE SHAFT 36
4 76
23 15-0606 1 REAR NOZZLE GUIDE SHAFT 10 FT 78 F
F 39
24 16-0867 2 SPACER-.25 RND .75 X .344 SST
25 17-0192 1 SPRING-COMP .36 X 1.50 X .029 SST 75 29 9
67
26 18-0354 1 NOZZLE AND ROLLER SUPPORT
81
27 18-0355 1 STOP CYLINDER SUPPORT
28 21-0158 2 METER OUT FLOW CONTROL 7665-04-10 42
2
29 28-0216 2 PLFTG-MALE ELBOW 4MM-1/8BSPT
30 28-0303 1 PLFTG-MALE CONN 4MM-1/8BSPT 41
31 28-0898 1 1/4 FLARE FITTING-PARKER 4-4 FTX-B
21
32 28-0917 1 MALE STRAIGHT CONN. 3/16 DIA X 18 NPT
33 28-9827 1 1/2 X 3 NIPPLE SST 24
34 29-0566 1 M6 X 20 MM LG FH SST
E
35 29-0567 4 M6 X 25 MM LG FH SST
E
36 29-0589 2 M8 X 45 MM LG FH SST
37 29-0633 1 M4 X 12 MM LG HH SST DIN 933 72
82
38 29-0648 1 M5 X 6 MM LG HH SST DIN 933
79
39 29-0666 2 M6 X 8 MM LG HH SST DIN 933
40 29-0667 7 M6 X 10 MM LG HH SST DIN 933
41 29-0670 6 M6 X 16 MM LG HH SST DIN 933
42 29-0671 2 M6 X 20 MM LG HH SST DIN 933 6
43 29-0672 4 M6 X 25 MM LG HH SST DIN 933
44 29-0673 4 M6 X 30 MM LG HH SST DIN 933
45 29-0688 2 M8 X 20 MM LG HH SST DIN 933
46 29-0690 4 M8 X 30 MM LG HH SST DIN 933 D
D
47 29-0693 2 M8 X 45 MM LG HH SST DIN 933
48 29-0706 3 M10 X 25 MM LG HH SST DIN 933 8
49 29-0707 2 M10 X 30 MM LG HH SST DIN 933 10 82 47
50 29-0709 2 M10 X 40 MM LG HH SST DIN 933
51 29-0899 2 M5 X 65 MM LG SH SST
46
52 29-0916 1 M6 X 65 MM LG SH SST
53 29-0979 3 M4 X 8MM LG SETSCREW CUPPT SST 74 59
4 PLC'S 41
54 29-0992 2 M5 X 8MM LG SETSCREW CUPPT SST PRESS FIT
55 29-1017 2 M8 X 16MM LG SETSCREW CUPPT SST INTO ITEM 81
82
56 29-1128 2 M6 HEX NUT SST
57 29-1129 1 M8 HEX NUT SST 46
C
C 58 29-1295 2 CLAMP-HOSE 1-3/16 TO 1-3/4 DIA
5
59 29-1331 1 12MM OD X 16MM LG SHLDRSCREW SST
61 30-0790 1 BODY-1/2 CONDUIT TYPE LB ALUM
62 30-0863 2 SWITCH-HALL PNP NO 10/30VDC
58 2 PLC'S
63 30-0870 2 CLAMP HOLDER-BLACK PLASTIC 28
64 30-1089 2 CA-4 WIRE MALE/FEMALE STR .5M
2 PLC'S
65 30-1176 1 FLEX CONDUIT FITTING-1/2 STRAIGHT
1
66 30-1187 1 HEATER- 3/8 X 1, 200 WATTS 63 2 PLC'S
67 30-1189 1 TEMP. PROBE-GLUE NOZZLE RTD
68 32-2603 1 NOZZLE GUIDE LOWER PLT
64
69 32-2604 1 NOZZLE GUIDE UPPER PLATE 62 2 PLC'S B
B
70 32-2606 1 NOZZLE ADJUSTER LINK PLT
71 32-2739 1 FILM DRIVE LABEL PLT
72 38-0317 1 WASHER-THRUST .564 X 1.000 X .094 BRZ
73 38-0499 1 FILM SEAL ROLLER BRG 71
74 38-0510 1 BUSHING- 12MM X 14MM X 15MM LG
75 39-0409 1 PIN- 6MM X 41MM W/FLATS
76 39-9491 1 PIN-.125 DOWEL 1.500
77 40-0140 1 GASKET FOR LB CONDUIT BODY
78 40-0141 1 FIBERGLASS ROPE SEAL 1/4"
79 99-0859 1 FILM OVERLAP HOOK
80 99-0936 1 GLUE NOZZLE - 2 HOLE A
A 81 99-1183 8 6MM ID FLAT WASHER SST
GLUE NOZZLE ASSEMBLY
CHECKED BY DATE
64 TIPPER TIE TEW 08-10-07

A DOVER INDUSTRIES COMPANY SW TEW
APPROVED BY DATE
08-10-07 SIZE PART NO.
DRAWN BY
ST
DATE
08-10-07
RELEASED BY DATE 00-2905-11
ST 08-10-07 1:1.5
D0 NOT SCALE
4 3 2 1
ITEM QTY PART DESCRIPTION 3

NO. NUMBER
1 1 10-4578 PROX MOUNTING PLATE
2 1 18-0353 WASTE PAN SUPPORT 17
3 1 20-0148 M8 X 30MM LG ADJ HANDLE #KHF-680 2
D D
4 2 21-0158 METER OUT FLOW CONTROL 7665-04-10
5 2 29-0651 M5 X 12 MM LG HH SST DIN 933
6 6 29-0671 M6 X 20 MM LG HH SST DIN 933
7 2 29-0706 M10 X 25 MM LG HH SST DIN 933 9
8 2 29-0904 M6 X 12 MM LG SH SST 14
9 3 29-0980 M4 X 10MM LG SETSCREW CUP PT SST
10 1 30-0282 12MM OD PNP PROXIMITY SWITCH
11 2 30-0282NUT 30-0282NUT
5
12 1 30-0310 CA-PROX FEMALE/MALE STRAIGHT 8
13 1 32-2602 WASTE PAN ASSY MOUNT 11 C
C
14 1 32-2643 WASTE TRAY PROX PLATE
10 1
15 1 38-0113 WASHER-THRUST 1.000 X .507 X .090 DELRIN
16 1 75-0023 ROTARY ACTUATOR
17 1 99-0858 WASTE PAN WELDMENT
11 15
12
7
4
B
B
16
13
6 PLC'S 6
SW CHECKED BY
TEW
DATE
08-08-07 WASTE PAN ASSEMBLY A

A TM
02 SEE ECN 00-2906-02 09/28/10 CDS R

APPROVED BY DATE
01 SEE ECN 00-2906-01 12/04/07 ST TEW 08-08-07 SIZE PART NO.
00-2906-02

1:1 D0 NOT SCALE
4 3 2 1

NO. NUMBER
1 4 01-0952 LEVELER FOOT -1 INCH X 10 LG STUD
2 1 07-0334 GS3 GLUE SEAL FRAME
3 16 29-0702 M10 X 12 MM LG HH SST DIN 933
D D
4 4 29-9001 1-8UNC HEX JAM NUT SST
5 4 99-0482 4 NYLON SWIVEL CASTER
C
C
B
B 5
4 PLC'S 4
1 } 4 PLC'S
6
4 PLC'S
3
4 PLC'S
SW CHECKED BY
T.E.W. 12/10/07
DATE
GS15-300 FRAME ASSEMBLY A

A TM
02 SEE ECN 00-2913-02 05/05/09 SDG R

APPROVED BY DATE
01 SEE ECN 00-2913-01 12/29/08 ST D.MAY 12/11/07 SIZE PART NO.
00-2913-02

1:10 D0 NOT SCALE
8 7 6 5 4 3 2 1
ITEM PART DESCRIPTION QTY

NO. NUMBER
1 00-2937 VACUUM MANIFOLD ASSEMBLY 1
2 01-0257 SKIN BRAKE SHUTTLE BEARING BLOCK 2
3 01-0970 VACUUM SLIDE BLOCK REAR 1
4 01-0972 VACUUM BELT IDLER BLOCK 1 35 42
H
5 01-0973 VACUUM BASE - ALUM 1 H
6 01-0974 BLOCK - SCREW GUIDE 1
7 04-0611 CYL-32 X 25 DA - 8MM PIVOT 1 27
8 10-4625 PIVOT MOUNT - SCREW SIDE 1
9 10-4626 NUT PLATE LH 1
10 10-4627 CLEVIS - DOUBLE SIDED 1
11 15-0609 SHAFT-CANTILEVER-20MM 1 39 49
12 15-0610 SHAFT-20MM X 178MM KEYWAY 1 27
13 16-0439 SPACER-.46 RND 1.55 X 1.09 ACETRON 1
14 16-0845 SPACER-1.06 RND 1.62 X 1.25 DELRIN 1
15 16-0846 SPACER-.30 RND 1.62 X 1.25 SST 1
49
16 16-0847 SPACER-.29 RND 1.00 X .82 DELRIN 1 43
17 16-0848 SPACER-1.08 RND 1.00 X .82 DELRIN 1
18 16-0931 SPACER 1 G
G
19 28-0199 MALE ELBOW 3109-06-10 2 29 29
20 28-0583 3/4 BARB X 1/2 NPT NYLON 90DEG EL 1
21 28-0684 1-1/8" OETIKER HOSE CLAMP 1 47
22 28-9137 1/2 ALLEN PIPE PLUG SST 1
23 29-0656 M5 X 30 MM LG HH SST DIN 933 8
24 29-0670 M6 X 16 MM LG HH SST DIN 933 4 1
25 29-0690 M8 X 30 MM LG HH SST DIN 933 2
26 29-0691 M8 X 35 MM LG HH SST DIN 933 2
27 29-0695 M8 X 55 MM LG HH SST DIN 933 2
28 29-0931 M8 X 65 MM LG SH SST 4 44
29 29-1005 M6 X 10MM LG SETSCREW CUPPT SST 5 15
30 29-1009 M6 X 20MM LG SETSCREW CUPPT SST 3
31 29-1018 M8 X 20MM LG SETSCREW CUPPT SST 1 F
F 32 29-1060 M5 X 10 MM LG BH SST 2 30
33 29-1129 M8 HEX NUT SST 1
34 29-1341 SMALLEY RING-42MM BORE 2 39
35 29-1342 SNAP RING - 20MM SHAFT 1
36 29-1343 E-CLIP FOR 8MM SHAFT 3
37 32-2623 LINKAGE PLATE 2
38 38-0284 FL16 SIMPLICITY LINEAR BEARING 2 11
39 38-0513 BEARING-BALL-20MM X 42MM X 12MM SST 4
40 39-0413 PIN-8MM HEADED 20MM USABLE LG GROOVED 3 30
12
41 39-0414 PIN-8MM HEADED 32MM FLAT 2
42 57-0209 ROTA-CLIP VACUUM DRIVE BELT 1
43 57-0793 TIMING PULLEY-L100-28 TEETH-42MM-SETSCR 1
44 57-0794 TIMING PULLEY-L100-28 TEETH-20MM KEYED 1 E
31 4
E 45 57-0795 TIMING PULLEY-H200-16 TEETH-20MM KEYED 1
46 62-0069 2-126 O-RING .103 X 1.562 OD 4 28
47 99-0619 6MM X 25MM LONG KEY SST 1
49 99-1184 8MM ID FLAT WASHER SST 3
50 99-1246 8MM ID LOCK WASHER SST 1
51 99-9602 #10 FLAT WASHER SST 2 16
33
22
D
D
49 34
50
26 39
*USE LOCTITE RC/680 (GREEN) 5

RETAINING COMPOUND TIPPER TIE C
C
# 24-0139 ON ALL THE O.D.'S OF
THE BALL BEARINGS.
14
21 39
20 34
25 B
B 17
45
29
48
A
A
CHECKED BY DATE
03 SEE ECN 00-2939-03 03/17/09 ST TIPPER TIE GRIGGS 09/28/07 VACUUM BELT DRIVE - REAR
02
01
SEE ECN 00-2939-02
SEE ECN 00-2939-01
01/30/09
07/29/08
MDL
JEH
GRIGGS 09/28/07
DATE
SIZE PART NO.
LOWDER 09/28/07
LOWDER 09/28/07 1:1
D0 NOT SCALE
8 7 6 5 4 3 2 1
SEE SHEET 1 FOR NOTES
2 23
38 51
ITEM PART 46
DESCRIPTION QTY
H NO. NUMBER H
1 00-2937 VACUUM MANIFOLD ASSEMBLY 1 13
3 01-0970 VACUUM SLIDE BLOCK REAR 1
4 01-0972 VACUUM BELT IDLER BLOCK 1
5 01-0973 VACUUM BASE - ALUM 1
7 04-0611 CYL-32 X 25 DA - 8MM PIVOT 1
9 10-4626 NUT PLATE LH 1
11 15-0609 SHAFT-CANTILEVER-20MM 1
12 15-0610 SHAFT-20MM X 178MM KEYWAY 1
G
13 16-0439 SPACER-.46 RND 1.55 X 1.09 ACETRON 1 G
15 16-0846 SPACER-.30 RND 1.62 X 1.25 SST 1
16 16-0847 SPACER-.29 RND 1.00 X .82 DELRIN 1 29 3
2
18 16-0931 SPACER 1
19 28-0199 MALE ELBOW 3109-06-10 2 7
20 28-0583 3/4 BARB X 1/2 NPT NYLON 90DEG EL 1
21 28-0684 1-1/8" OETIKER HOSE CLAMP 1
23 29-0656 M5 X 30 MM LG HH SST DIN 933 8
24 29-0670 M6 X 16 MM LG HH SST DIN 933 4
25 29-0690 M8 X 30 MM LG HH SST DIN 933 2 41
26 29-0691 M8 X 35 MM LG HH SST DIN 933 2 23
F
F
27 29-0695 M8 X 55 MM LG HH SST DIN 933 2
28 29-0931 M8 X 65 MM LG SH SST 4
32 29-1060 M5 X 10 MM LG BH SST 2
33 29-1129 M8 HEX NUT SST 1
34 29-1341 SMALLEY RING-42MM BORE 2
46
38 38-0284 FL16 SIMPLICITY LINEAR BEARING 2
39 38-0513 BEARING-BALL-20MM X 42MM X 12MM SST 4 E
E 40 39-0413 PIN-8MM HEADED 20MM USABLE LG GROOVED 3
41 39-0414 PIN-8MM HEADED 32MM FLAT 2 30
43 57-0793 TIMING PULLEY-L100-28 TEETH-42MM-SETSCR 1 36
44 57-0794 TIMING PULLEY-L100-28 TEETH-20MM KEYED 1 36
45 57-0795 TIMING PULLEY-H200-16 TEETH-20MM KEYED 1
46 62-0069 2-126 O-RING .103 X 1.562 OD 4 19
47 99-0619 6MM X 25MM LONG KEY SST 1 USES BUSHINGS 38-0514
48 99-0623 6MM X 55MM LONG KEY SST 1 41
49 99-1184 8MM ID FLAT WASHER SST 3 36
51 99-9602 #10 FLAT WASHER SST 2 37
D
D
10
18
41
32
51
38 24
C
C
26
6 37
40
9
8 40 40
B
B
A
A
BOTTOM VIEW VACUUM BELT DRIVE - REAR

CHECKED BY DATE
TIPPER TIE GRIGGS 09/28/07

GRIGGS 09/28/07
DATE
SIZE PART NO.
DRAWN BY
LOWDER 09/28/07
LOWDER 09/28/07 1:1
D0 NOT SCALE
8 7 6 5 4 3 2 1

NO. NUMBER
1 00-2937 VACUUM MANIFOLD ASSEMBLY 1
3 01-0971 VACUUM SLIDE BLOCK FRONT 1
H
5 01-0973 VACUUM BASE - ALUM 1 H
7 04-0611 CYL-32 X 25 DA - 8MM PIVOT 1
10 10-4629 NUT PLATE RH 1
12 15-0610 SHAFT-20MM X 178MM KEYWAY 1 50
13 15-0611 SHAFT - 15MM - SMALL PULLEY 4 30
14 16-0439 SPACER-.46 RND 1.55 X 1.09 ACETRON 1
15 16-0845 SPACER-1.06 RND 1.62 X 1.25 DELRIN 1 58
16 16-0846 SPACER-.30 RND 1.62 X 1.25 SST 1
17 16-0847 SPACER-.29 RND 1.00 X .82 DELRIN 1
18 16-0848 SPACER-1.08 RND 1.00 X .82 DELRIN 1 G
G
19 16-0849 SPACER-1.75 RND 1.07 X .81 SST 4
20 16-0931 SPACER 1 56
39
21 28-0199 MALE ELBOW 3109-06-10 2
22 28-0583 3/4 BARB X 1/2 NPT NYLON 90DEG EL 1 33
24 28-9137 1/2 ALLEN PIPE PLUG SST 1 46
1
25 29-0656 M5 X 30 MM LG HH SST DIN 933 8
52
26 29-0670 M6 X 16 MM LG HH SST DIN 933 4
27 29-0687 M8 X 16 MM LG HH SST DIN 933 4
28 29-0690 M8 X 30 MM LG HH SST DIN 933 1 16
29 29-0691 M8 X 35 MM LG HH SST DIN 933 3
30 29-0695 M8 X 55 MM LG HH SST DIN 933 2 33
31 29-0931 M8 X 65 MM LG SH SST 8 F
F 32 29-1005 M6 X 10MM LG SETSCREW CUPPT SST 13 46
34 29-1015 M8 X 12MM LG SETSCREW 4
12
36 29-1060 M5 X 10 MM LG BH SST 2
37 29-1129 M8 HEX NUT SST 1
38 29-1341 SMALLEY RING-42MM BORE 2 32
40 29-1343 E-CLIP FOR 8MM SHAFT 3 31
41 29-1344 SNAP RING-15MM SHAFT 8
42 32-2623 LINKAGE PLATE 2 32 11
43 32-2624 PLATE - BOTTOM IDLER 1
44 32-2625 PLATE - TOP IDLER 1 17 E
E 45 38-0284 FL16 SIMPLICITY LINEAR BEARING 2
31
50 57-0209 ROTA-CLIP VACUUM DRIVE BELT 1 24
51 57-0793 TIMING PULLEY-L100-28 TEETH-42MM-SETSCR 1 46
52 57-0794 TIMING PULLEY-L100-28 TEETH-20MM KEYED 1
53 57-0795 TIMING PULLEY-H200-16 TEETH-20MM KEYED 1
54 57-0796 TIMING PULLEY-H200-14 TEETH-28MM SETSCR 4
55 62-0069 2-126 O-RING .103 X 1.562 OD 4
5
57 99-0623 6MM X 55MM LONG KEY SST 1 D
D 58 99-1184 8MM ID FLAT WASHER SST 3
60 99-9602 #10 FLAT WASHER SST 2 4
15
46
37
28
38
35
22
*USE LOCTITE RC/680 (GREEN) 23 C
RETAINING COMPOUND TIPPER TIE

C
PART NUMBER 24-0139 ON ALL THE

O.D.'S OF THE BALL BEARINGS.
58
59
B
B
29
A
A
CHECKED BY DATE
TIPPER TIE GRIGGS 10/01/07 VACUUM BELT DRIVE - FRONT

02
01
SEE ECN 00-2940-02
SEE ECN 00-2940-01
03/17/09
01/30/09
ST
MDL
GRIGGS 10/01/07
DATE
SIZE PART NO.
LOWDER 10/01/07
LOWDER 10/01/07 1:1
D0 NOT SCALE
8 7 6 5 4 3 2 1

NO. NUMBER H
H 1 00-2937 VACUUM MANIFOLD ASSEMBLY 1
7 04-0611 CYL-32 X 25 DA - 8MM PIVOT 1
34 4 PLACES
13 15-0611 SHAFT - 15MM - SMALL PULLEY 4 G
G 14 16-0439 SPACER-.46 RND 1.55 X 1.09 ACETRON 1
16 16-0846 SPACER-.30 RND 1.62 X 1.25 SST 1
18 16-0848 SPACER-1.08 RND 1.00 X .82 DELRIN 1 44
19 16-0849 SPACER-1.75 RND 1.07 X .81 SST 4
20 16-0931 SPACER 1
21 28-0199 MALE ELBOW 3109-06-10 2
25 29-0656 M5 X 30 MM LG HH SST DIN 933 8 33
26 29-0670 M6 X 16 MM LG HH SST DIN 933 4
27 29-0687 M8 X 16 MM LG HH SST DIN 933 4 57 F
F
28 29-0690 M8 X 30 MM LG HH SST DIN 933 1
29 29-0691 M8 X 35 MM LG HH SST DIN 933 3
30 29-0695 M8 X 55 MM LG HH SST DIN 933 2
31 29-0931 M8 X 65 MM LG SH SST 8 53
36 29-1060 M5 X 10 MM LG BH SST 2
37 29-1129 M8 HEX NUT SST 1 54 4 PLACES
38 29-1341 SMALLEY RING-42MM BORE 2
E
E
41 29-1344 SNAP RING-15MM SHAFT 8 41 4 PLACES
43 32-2624 PLATE - BOTTOM IDLER 1
44 32-2625 PLATE - TOP IDLER 1
45 38-0284 FL16 SIMPLICITY LINEAR BEARING 2 *USE LOCTITE RC/680 (GREEN) 47 4 PLACES
RETAINING COMPOUND TIPPER TIE
48
49
39-0413
39-0414
PIN-8MM HEADED 20MM USABLE LG GROOVED
PIN-8MM HEADED 32MM FLAT
3
2
PART NUMBER 24-0139 ON ALL THE
50 57-0209 ROTA-CLIP VACUUM DRIVE BELT 1 O.D.'S OF THE BALL BEARINGS.
51 57-0793 TIMING PULLEY-L100-28 TEETH-42MM-SETSCR 1 19 4 PLACES
52 57-0794 TIMING PULLEY-L100-28 TEETH-20MM KEYED 1
D
D 53 57-0795 TIMING PULLEY-H200-16 TEETH-20MM KEYED 1
55 62-0069 2-126 O-RING .103 X 1.562 OD 4
58 99-1184 8MM ID FLAT WASHER SST 3 47 4 PLACES
60 99-9602 #10 FLAT WASHER SST 2
13 4 PLACES C
C
41 4 PLACES
B
B
43
A
A 27 4 PLACES
VACUUM BELT DRIVE - FRONT

CHECKED BY DATE

GRIGGS 10/01/07
DATE
SIZE PART NO.
DRAWN BY
LOWDER 10/01/07
LOWDER 10/01/07 1:3
D0 NOT SCALE
8 7 6 5 4 3 2 1

45
ITEM PART 55
DESCRIPTION SHEET3/QTY. 55
NO. NUMBER 14
H
H 1 00-2937 VACUUM MANIFOLD ASSEMBLY 1
4 01-0972 VACUUM BELT IDLER BLOCK 1 36
7 04-0611 CYL-32 X 25 DA - 8MM PIVOT 1
8 10-4625 PIVOT MOUNT - SCREW SIDE 1 60
13 15-0611 SHAFT - 15MM - SMALL PULLEY 4
G
G 14 16-0439 SPACER-.46 RND 1.55 X 1.09 ACETRON 1
16 16-0846 SPACER-.30 RND 1.62 X 1.25 SST 1 25
19 16-0849 SPACER-1.75 RND 1.07 X .81 SST 4
20 16-0931 SPACER 1
21 28-0199 MALE ELBOW 3109-06-10 2
24 28-9137 1/2 ALLEN PIPE PLUG SST 1 55
25 29-0656 M5 X 30 MM LG HH SST DIN 933 8
26 29-0670 M6 X 16 MM LG HH SST DIN 933 4
27 29-0687 M8 X 16 MM LG HH SST DIN 933 4 F
F
28 29-0690 M8 X 30 MM LG HH SST DIN 933 1 45 2
29 29-0691 M8 X 35 MM LG HH SST DIN 933 3
30 29-0695 M8 X 55 MM LG HH SST DIN 933 2
31 29-0931 M8 X 65 MM LG SH SST 8
2
36 29-1060 M5 X 10 MM LG BH SST 2
37 29-1129 M8 HEX NUT SST 1
38 29-1341 SMALLEY RING-42MM BORE 2 USES BUSHINGS 32-2623
40 29-1343 E-CLIP FOR 8MM SHAFT 3 E
E 41 29-1344 SNAP RING-15MM SHAFT 8 9
60
42 32-2623 LINKAGE PLATE 2 36 25 32 42
43 32-2624 PLATE - BOTTOM IDLER 1 40
44 32-2625 PLATE - TOP IDLER 1
45 38-0284 FL16 SIMPLICITY LINEAR BEARING 2 9
46 38-0513 BEARING-BALL-20MM X 42MM X 12MM SST 4 7
51 57-0793 TIMING PULLEY-L100-28 TEETH-42MM-SETSCR 1
52 57-0794 TIMING PULLEY-L100-28 TEETH-20MM KEYED 1 26
53 57-0795 TIMING PULLEY-H200-16 TEETH-20MM KEYED 1 D
D
55 62-0069 2-126 O-RING .103 X 1.562 OD 4
56 99-0619 6MM X 25MM LONG KEY SST 1 8
58 99-1184 8MM ID FLAT WASHER SST 3
60 99-9602 #10 FLAT WASHER SST 2 20
C
C
21
49
48
48 29
48
49 B
B 10
6
A
BOTTOM VIEW A
VACUUM BELT DRIVE - FRONT

CHECKED BY DATE

GRIGGS 10/01/07
DATE
SIZE PART NO.
DRAWN BY
LOWDER 10/01/07
LOWDER 10/01/07 1:1.25
D0 NOT SCALE
8 7 6 5 4 3 2 1
ITEM PART
QTY DESCRIPTION
NO. NUMBER 2 PLC'S
1 1 00-2939 VACUUM BELT DRIVE - REAR 5
2 1 00-2940 VACUUM BELT DRIVE - FRONT 23
3 1 09-1098 GUARD - FRONT BELT 5
4 1 09-1099 GUARD - REAR BELT
5 2 09-1100 GUARD - VACUUM BELT 2 PLC'S H
H
6 1 10-4631 GUIDE TENSIONER SHAFT 23
7 1 10-4632 MOUNT BELT TENSIONER
8 2 10-4633 MOUNT DRIVE SHAFT BEARING
9 1 15-0612 SHAFT - SQ BAR - 0.62 X 21.50
10 1 15-0613 SHAFTTAPPED-1.00 X 21.50
11 1 15-0614 SHAFTTAPPED-0.75 X 21.50
12 1 15-0615 SHAFT-20MM X 305MM KEYWAY
13 1 15-0616 SHAFT-CANTILEVER-20MM X 61MM
14 1 16-0399 ADJUSTER-CENTERING SST
15 1 16-0850 SPACER-1.75 RND 1.23 X 1.00 SST
16 1 20-0147 M5 X 20MM LG ADJ.HANDLE #KHF-615 X X
17 1 20-0222 HANDWHEEL-125MM OD - 7/16-20 - ALUM
G 18 1 25-0150 MOTOR-2HP 230/460V 1800 RPM 60 HZ 3 PH G
19 1 29-0364 NUT-7/16-20 THREADED COUPLING
20 1 29-0384 7/16-20 LEFT-HAND HEX NUT SST DIMENSION 'X' MUST BE SET THE
SAME IN BOTH LOCATIONS.
21 3 29-0610 M12 X 40 MM LG FH SST
2 PLC'S
22 1 29-0673 M6 X 30 MM LG HH SST DIN 933
23 9 29-0684 M8 X 12 MM LG HH SST DIN 933
4
24 4 29-0690 M8 X 30 MM LG HH SST DIN 933
25 2 29-0690 M8 X 30 MM LG HH SST DIN 933
26 1 29-0693 M8 X 45 MM LG HH SST DIN 933
27 1 29-0697 M8 X 65 MM LG HH SST DIN 933 BOTTOM VIEW
28 14 29-0708 M10 X 35 MM LG HH SST DIN 933
23
29 4 29-0722 M12 X 50 MM LG HH SST DIN 933
31 2 29-1014 M8 X 10MM LG SETSCREW CUPPT SST F
F
34 1 29-1129 M8 HEX NUT SST
35 1 29-1342 SNAP RING - 20MM SHAFT
36 1 29-1345 THREADED ROD7/16-20 L.H. X 9.75
37 1 29-1346 THREADED ROD7/16-20 RH X 9.75
38 4 29-9319 3/8-16 X 1-1/4 LG HH SST
39 4 29-9320 3/8-16 X 1-1/2 LG HH SST 47
40 6 29-9439 7/16-20 HEX JAM NUT SST
41 1 29-9481 5/16-18 X 5/16 LG CUPPNT SET SCR
42 1 30-1169 FLEX CONDUIT FITTING - 3/4 STR
43 1 30-1170 FLEX CONDUIT-3/4 PLST COVER 23 46
44 1 32-2613 VACUUM DRIVE REAR PLATE 3 E
E 45 1 32-2626 VACUUM DRIVE FRONT PLATE 3 PLC'S
46 2 38-0285 BUSHING-FLGD .438 X .561 X 1.535 SST 40
47 2 38-0316 BUSHING-.565 X .688 X .750 ACETRON
48 1 38-0317 WASHER-THRUST .564 X 1.000 X .094 BRZ
50 2 38-0516 BEARING-BALL 20MM SST FLGD PLST 19 36
51 2 38-0517 BEARING-BALL-20MM X 32MM X 7MM SST
52 1 39-0310 PIN-.155 DOWEL .875 ACETRON GP 40
53 1 57-0541 LOVEJOY COUPLING SPIDER #11499
54 1 57-0795 TIMING PULLEY-H200-16 TEETH-20MM KEYED
55 1 57-0797 TIMING PULLEY-H200-16 TEETH-32MM-SETSCR
56 1 57-0799 GEARBOX 5-1 WORM 140TC
57 1 57-0801 COUPLING LOVEJOY HUB 1 ID ALUM D
D
58 1 57-0802 COUPLING LOVEJOY HUB 20MM ID ALUM
59 1 57-0803 TIMING BELT-H200-75-DBL 10
60 1 99-0619 6MM X 25MM LONG KEY SST
62 5 99-1184 8MM ID FLAT WASHER SST 40 37
63 18 99-1185 10MM ID FLAT WASHER SST 46
65 1 99-1246 8MM ID LOCK WASHER SST 4 PLACES 52
67 4 99-1248 12MM ID LOCK WASHER SST 47
62
C
C
4 PLACES
24
40
40
B
B
40
9
17
48 11
45
USES 20-0220 CENTERING ADJUSTER HANDLE
14 WHICH WILL SHIP LOOSE WITH THE MACHINE. A
A
CHECKED BY DATE
49 03 SEE ECN 00-2941-03 03/18/09 ST TIPPER TIE GRIGGS 10/02/07 FILM DRIVE ASSY - GS15-300
USE RED LOCTITE ON CENTER THREADS
02
01
SEE ECN 00-2941-02
SEE ECN 00-2941-01
05/02/08
11/27/07
ST
MDL
GRIGGS 10/02/07
DATE
SIZE PART NO.
AND HANDLE GRIP THREADS NO. ZONE DESCRIPTION DATE APPROV. NO. ZONE DESCRIPTION DATE APPROV DRAWN BY
LOWDER 10/02/07
LOWDER 10/02/07 1:1
D0 NOT SCALE
8 7 6 5 4 3 2 1
ITEM PART
QTY DESCRIPTION
NO. NUMBER
1 1 00-2939 VACUUM BELT DRIVE - REAR 28
2 1 00-2940 VACUUM BELT DRIVE - FRONT
3 1 09-1098 GUARD - FRONT BELT
H
4 1 09-1099 GUARD - REAR BELT H
5 2 09-1100 GUARD - VACUUM BELT
*USE LOCTITE RC/680 (GREEN)

6 1 10-4631 GUIDE TENSIONER SHAFT
7 1 10-4632 MOUNT BELT TENSIONER
66
8
9
2
1
10-4633
15-0612
MOUNT DRIVE SHAFT BEARING
SHAFT - SQ BAR - 0.62 X 21.50
RETAINING COMPOUND ON ALL
10 1 15-0613 SHAFTTAPPED-1.00 X 21.50 THE O.D.'S OF THE BALL BEARINGS. 63
11 1 15-0614 SHAFTTAPPED-0.75 X 21.50 2 50
12 1 15-0615 SHAFT-20MM X 305MM KEYWAY
13 1 15-0616 SHAFT-CANTILEVER-20MM X 61MM
14 1 16-0399 ADJUSTER-CENTERING SST 1
15 1 16-0850 SPACER-1.75 RND 1.23 X 1.00 SST
16 1 20-0147 M5 X 20MM LG ADJ.HANDLE #KHF-615
17 1 20-0222 HANDWHEEL-125MM OD - 7/16-20 - ALUM G
G
19 1 29-0364 NUT-7/16-20 THREADED COUPLING
20 1 29-0384 7/16-20 LEFT-HAND HEX NUT SST
21 3 29-0610 M12 X 40 MM LG FH SST
22 1 29-0673 M6 X 30 MM LG HH SST DIN 933
23 9 29-0684 M8 X 12 MM LG HH SST DIN 933
24 4 29-0690 M8 X 30 MM LG HH SST DIN 933
25 2 29-0690 M8 X 30 MM LG HH SST DIN 933 44
28
26 1 29-0693 M8 X 45 MM LG HH SST DIN 933
35
27 1 29-0697 M8 X 65 MM LG HH SST DIN 933
28 14 29-0708 M10 X 35 MM LG HH SST DIN 933
29 4 29-0722 M12 X 50 MM LG HH SST DIN 933
30 2 29-1005 M6 X 10MM LG SETSCREW CUPPT SST F
F 31 2 29-1014 M8 X 10MM LG SETSCREW CUPPT SST
51
34 1 29-1129 M8 HEX NUT SST
35 1 29-1342 SNAP RING - 20MM SHAFT 15
36 1 29-1345 THREADED ROD7/16-20 L.H. X 9.75
8
37 1 29-1346 THREADED ROD7/16-20 RH X 9.75
38 4 29-9319 3/8-16 X 1-1/4 LG HH SST 25 51
39 4 29-9320 3/8-16 X 1-1/2 LG HH SST 30
40 6 29-9439 7/16-20 HEX JAM NUT SST 61
41 1 29-9481 5/16-18 X 5/16 LG CUPPNT SET SCR 13
42 1 30-1169 FLEX CONDUIT FITTING - 3/4 STR
43 1 30-1170 FLEX CONDUIT-3/4 PLST COVER 22 31 27 E
E 44 1 32-2613 VACUUM DRIVE REAR PLATE 54
45 1 32-2626 VACUUM DRIVE FRONT PLATE 55 34
46 2 38-0285 BUSHING-FLGD .438 X .561 X 1.535 SST 25 7
47 2 38-0316 BUSHING-.565 X .688 X .750 ACETRON
48 1 38-0317 WASHER-THRUST .564 X 1.000 X .094 BRZ 6
28
50 2 38-0516 BEARING-BALL 20MM SST FLGD PLST
51 2 38-0517 BEARING-BALL-20MM X 32MM X 7MM SST 33
52 1 39-0310 PIN-.155 DOWEL .875 ACETRON GP
53 1 57-0541 LOVEJOY COUPLING SPIDER #11499
54 1 57-0795 TIMING PULLEY-H200-16 TEETH-20MM KEYED 21 62
55 1 57-0797 TIMING PULLEY-H200-16 TEETH-32MM-SETSCR
56 1 57-0799 GEARBOX 5-1 WORM 140TC D
65
D 57 1 57-0801 COUPLING LOVEJOY HUB 1 ID ALUM
58 1 57-0802 COUPLING LOVEJOY HUB 20MM ID ALUM
59 1 57-0803 TIMING BELT-H200-75-DBL 66 26
39 66 63
67 C
C
50
59
18 32 12 64
60
58 B
B
63
53
38
41
42
43
57
A
A
56
FILM DRIVE ASSY - GS15-300
CHECKED BY DATE
BELT INSTALLATION A DOVER INDUSTRIES COMPANY SW APPROVED BY

GRIGGS 10/02/07
DATE
SIZE PART NO.
00-2941-03
BOTTOM VIEW DRAWN BY
LOWDER 10/02/07
DATE RELEASED BY
LOWDER 10/02/07
DATE
SCALE 1:2.5
D0 NOT SCALE
4 3 2 1
ITEM PART REFERENCE: MOTOR ROTATION

QTY DESCRIPTION
NO. NUMBER CLOCKWISE ROTATION
3 4 PLC'S
1 1 00-2955 EXTRUDER EXIT ASSEMBLY IS THE CORRECT ROTATION
2 1 10-4634 PRESSURE TRANSDUCER MOUNT 4 PLC'S 16
10 4 PLC'S
3 4 16-0838 SPACER- RND1 X .66 X 1.13 19 23 11
4 1 25-0151 MOTOR-1HP 230/460V 1800 RPM 3 PH
D 4 D
6 2 28-0300 PLFTG-UNION TEE 6MM 15
7 1 28-0875 1/4 X 48 HEATED HOSE- GS3
9 2 29-0651 M5 X 12 MM LG HH SST DIN 933
10 4 29-0709 M10 X 40 MM LG HH SST DIN 933
22 4 PLC'S
11 4 29-0736 M16 X 65 MM LG HH SST DIN 933
2
12 4 29-9319 3/8-16 X 1-1/4 LG HH SST 12 4 PLC'S
17
13 1 30-0432 TRANSDUCER 6 COND SHIELDED CA
15 1 30-1188 TEMP PROBE- PRESSURE TRANSDUCER
C
C 16 1 30-1190 FLEX CONDUIT FITTING-3/4 45 DEG ELBOW
17 1 30-1199 TRANSMITTER- PRESS TPT4634 5
USE 6 21
18 1 30-1199-A 30-1199 PART A THIS PART COMES NEVER
19 1 32-2612 GS3 EXTRUDER MOUNT WITH THE 30-1199 SEEZ
20 20 FT 40-0141 FIBERGLASS ROPE SEAL 1/4" TRANSMITTER 7 5 BOTH SIDES
9
21 1 99-0813 GLUE EXTRUDER
23 4 99-1187 16MM ID FLAT WASHER SST 13 8
20
WRAP AROUND THE THIS HEATED HOSE B
B CONNECTION (10 FEET) RUNS ON 240 VOLTS.
WHEN THE HEATED HOSE
IS ATTACHED. 6 USE NEVER SEEZ
2 PLC'S
5
REFERENCE: BARREL HEATER
REPLACEMENT P/N 30-1256.
TWO USED ON EACH EXTRUDER
WRAP THE END OF THE REFERENCE: RUPTURE DISC
BARREL WITH ROPE (10FT) REPLACEMENT P/N 99-0885
1 USE NEVER SEEZ
04
03
SEE ECN 00-2950-04
SEE ECN 00-2950-03
4/29/09
01/16/09
SDG
CDS
SW CHECKED BY
K.POLING 12-11-07
DATE
GLUE SEAL EXTRUDER ASSY A

A TM
06 SEE ECN 00-2950-06 10/28/09 ST R

APPROVED BY DATE
05 SEE ECN 00-2950-05 08/24/09 ST D.MAY 12-11-07 SIZE PART NO.
00-2950-06
REVISIONS TEW 12-11-07 TEW 12-14-07 SCALE

1:6 D0 NOT SCALE
4 3 2 1
ITEM PART
QTY DESCRIPTION
NO. NUMBER
1 1 00-2955 EXTRUDER EXIT ASSEMBLY

2 1 10-4634 PRESSURE TRANSDUCER MOUNT
7 WRAP AROUND THE CONNECTION
3 4 16-0838 SPACER- RND1 X .66 X 1.13 WHEN THE HEATED HOSE
D 20 IS ATTACHED. D
4 1 25-0151 MOTOR-1HP 230/460V 1800 RPM 3 PH
4
7 1 28-0875 1/4 X 48 HEATED HOSE- GS3
9 2 29-0651 M5 X 12 MM LG HH SST DIN 933
10 4 29-0709 M10 X 40 MM LG HH SST DIN 933
11 4 29-0736 M16 X 65 MM LG HH SST DIN 933
12 4 29-9319 3/8-16 X 1-1/4 LG HH SST 17
16 C
C 13 1 30-0432 TRANSDUCER 6 COND SHIELDED CA
THIS PART COMES WITH
14 1 30-1177 FLEX CONDUIT FITTING-1/2 90 DEG ELBOW THE 30-1199 TRANSMITTER
15 1 30-1188 TEMP PROBE- PRESSURE TRANSDUCER 22
16 1 30-1190 FLEX CONDUIT FITTING-3/4 45 DEG ELBOW 4 PLC'S 5
17 1 30-1199 TRANSMITTER- PRESS TPT4634 6 2
18 1 30-1199-A 30-1199 PART A 12
19 1 32-2612 GS3 EXTRUDER MOUNT 4 PLC'S 14
20 20 FT 40-0141 FIBERGLASS ROPE SEAL 1/4"
9
21 1 99-0813 GLUE EXTRUDER 21

B
B
4 PLC'S 11
23
4 PLC'S
19 3 4 PLC'S
4 PLC'S 10
SW CHECKED BY
K.POLING 12-11-07
DATE

A TM
APPROVED BY DATE
R
D.MAY 12-11-07 SIZE PART NO.
00-2950-06

TEW 12-11-07 TEW 12-14-07 SCALE
1:7 D0 NOT SCALE
4 3 2 1
ITEM PART USE TWO 30-1186 WIRE NUTS TO

QTY DESCRIPTION CONNECT HEATER WIRES.
NO. NUMBER
1 09-1095 1 EXTRUDER EXIT INNER SHIELD 19 COAT HEATER WITH WATLUBE PRODUCT.
FOLLOW THE INSTRUCTIONS ON THE
2 09-1097 1 EXTRUDER EXIT SHIELD WLDMT BOTTLE. 24-0138
7
3 10-4646 1 EXTRUDER EXIT SHIELD MOUNT 6 D
D USE ANTI SEIZE COMPOUND
4 10-4647 1 EXTRUDER EXIT HEATER BLK 24-0142 ON FACES SHOWN.
5 16-0925 2 SPACER- 1.728 RND.5 X M6 SST CONNECTS TO THE
16 OUTLET OF THE
4
6 28-0898 1 1/4 FLARE FITTING-PARKER 4-4 FTX-B EXTRUDER.
7 28-9125 1 1/2 X 2 NIPPLE SST 22 9
8 28-9136 1 1/4 ALLEN PIPE PLUG FLUSH MT SST 17
9 28-9527 1 1/4 HEX NIPPLE SST
10 29-0633 1 M4 X 12 MM LG HH SST DIN 933 USE ANTI SEIZE COMPOUND
18 24-0142 ON FACES SHOWN.
11 29-0648 1 M5 X 6 MM LG HH SST DIN 933
10
12 29-0650 4 M5 X 10 MM LG HH SST DIN 933 3 FEET 21
USE 30-1171 WIRE
8 11 C
C 13 29-0666 6 M6 X 8 MM LG HH SST DIN 933
14 29-0670 2 M6 X 16 MM LG HH SST DIN 933
1
15 29-1009 2 M6 X 20MM LG SETSCREW CUPPT SST 2
17 30-0790 1 BODY-1/2 CONDUIT TYPE LB ALUM 13 3
18 30-1176 1 FLEX CONDUIT FITTING-1/2 STRAIGHT
19 30-1187 1 HEATER- 3/8 X 1, 200 WATTS
20 30-1191 1 TEMP. PROBE-OUTBOARD BLK. RTD
21 30-1195 1 FLEX CONDUIT-1/2" PLST COVER 12 4 PLC'S
B
22 40-0140 1 GASKET FOR LB CONDUIT BODY
B
13
13
20
14
13 5
15
03 SEE ECN 00-2955-03 04/20/09 ST

SW CHECKED BY
K.POLING 11-29-07
DATE
EXTRUDER EXIT ASSEMBLY A

A TM
02 SEE ECN 00-2955-02 12/1/08 TEW R

APPROVED BY DATE
01 SEE ECN 00-2955-01 11/19/08 TEW D.MAY 11-29-07 SIZE PART NO.
00-2955-03

1:3.5 D0 NOT SCALE
4 3 2 1
ITEM PART
QTY DESCRIPTION
NO. NUMBER
1 1 00-3462 TRANSITION TRAY ROLLER ASSEMBLY
2 1 00-3466 GLUE SEAL COOLER ASSEMBLY
3 1 01-0979 BLOCK-VERTICAL END ROLLER
4 1 04-0561 CYL-25MM X 100MM SR
5 1 04-0562 CLEVIS BRACKET-8MM PIN SST
6 1 10-4648 SENSOR BRACKET D
7 1 10-4649 TRAY SIDE - FRONT
D 8 1 10-4650 TRAY SIDE - REAR

9 1 10-4652 DANCER ARM WELDMENT
10 1 10-4655 CLEVIS-6MM - M10 HOLE
11 1 10-4656 CLEVIS-16MM M16 LH
12 1 10-4657 CLEVIS-16MM M16 RH
13 1 10-4658 MOUNT- DANCER CYL REAR
14 4 15-0630 SHAFT-16MM X 184.1MM TAPPED M10
15 1 15-0631 SHAFT-20MM X 270MM FLAT
16 1 15-0632 TIE ROD-HEX-M16 LH - M16 RH
17 1 15-0633 SHAFT-20MM X 200MM FLAT
18 4 16-0864 SHAFT COLLAR-20MM ID
19 1 20-0223 HANDLE WHEEL - 80MM DIA - 10MM HOLE
20 1 24-0104 SMC REGULATOR AR30K-N03-Z
C 23 1 28-9105 1/8 X 3-1/2 NIPPLE SST C
24 1 28-9534 1/8 UNION ELBOW SST
25 1 29-0607 M12 X 25 MM LG FH SST
26 3 29-0651 M5 X 12 MM LG HH SST DIN 933
27 6 29-0667 M6 X 10 MM LG HH SST DIN 933
28 6 29-0687 M8 X 16 MM LG HH SST DIN 933
29 4 29-0688 M8 X 20 MM LG HH SST DIN 933
30 4 29-0689 M8 X 25 HEX HEAD SST DIN 933 FRONT VIEW
31 8 29-0704 M10 X 16 MM LG HH SST DIN 933
32 4 29-0705 M10 X 20 MM LG HH SST DIN 933
33 1 29-0913 M6 X 50 MM LG SH SST
B
37 2 29-1128 M6 HEX NUT SST
38 1 29-1348 SCREW ADJ - M16 THREAD
B 39 1 31-0041 GAUGE-0-60 PSI 1.50 IN 1/8 NPT
40 1 32-2644 PLATE - TRAY MOUNT
41 2 38-0520 PILLOW BLOCK-20MM PLAIN BRG PLST
42 2 38-0521 BEARING-FLANGE 16MM X 18MM X 17MM PLST
43 2 38-0522 BEARING-FLANGE 10MM X 12MM X 8MM PLST
44 3 39-0297 PIN-1.125 CIRCLE COTTER
45 3 39-0417 PIN-12MM CLEVIS 200MM USABLE LG HOLE
46 1 39-0423 PIN-20MM HEADED 85MM WITH M12 TAP
47 1 39-0424 PIN-16MM HEAD 50MM USABLE LG HOLE
49 5 57-0805 TRANSITION ROLLER
50 1 57-0806 ROLLER-4IN PRODUCT
51 1 57-0808 DANCER ROLLER-3.25 IN
52 1 57-0809 CAM-DANCER SENSOR
REAR VIEW
53 1 74-0051 SENSOR
A 54 3 99-0876 TY-RAP #10 MOUNTING HOLE
A
SW
55 2 99-0896 WASHER FENDER 8MM X 24MM X 2MM SST
04 SEE ECN 00-2957-04 12/21/09 TEW CHECKED BY DATE
TRANSITION TRAY ASSEMBLY

03 SEE ECN 00-2957-03 06/25/09 SDG TM
M. LOWDER 12/27/07
M. LOWDER 12/27/07
05 SEE ECN 00-2957-05 01/05/10 TEW SIZE PART NO.
00-2957-06

REVISIONS K.POLING 12/7/07 M. LOWDER 12/27/07 SCALE 1:4 D0 NOT SCALE

DRAWING
SHEET 1 of 5
4 3 2 1
ITEM PART ITEM PART ITEM PART ITEM PART

QTY DESCRIPTION QTY DESCRIPTION QTY DESCRIPTION QTY DESCRIPTION
NO. NUMBER NO. NUMBER NO. NUMBER NO. NUMBER
15 1 15-0631 SHAFT-20MM X 270MM FLAT 29 4 29-0688 M8 X 20 MM LG HH SST DIN 933 BEARING-FLANGE 10MM X 12MM X 8MM
1 1 00-3462 TRANSITION TRAY ROLLER ASSEMBLY 43 2 38-0522 PLST
2 1 00-3466 GLUE SEAL COOLER ASSEMBLY 16 1 15-0632 TIE ROD-HEX-M16 LH - M16 RH 30 4 29-0689 M8 X 25 HEX HEAD SST DIN 933 44 3 39-0297 PIN-1.125 CIRCLE COTTER
17 1 15-0633 SHAFT-20MM X 200MM FLAT 31 8 29-0704 M10 X 16 MM LG HH SST DIN 933 PIN-12MM CLEVIS 200MM USABLE LG
3 1 01-0979 BLOCK-VERTICAL END ROLLER 45 3 39-0417 HOLE
4 1 04-0561 CYL-25MM X 100MM SR 18 4 16-0864 SHAFT COLLAR-20MM ID 32 4 29-0705 M10 X 20 MM LG HH SST DIN 933 46 1 39-0423 PIN-20MM HEADED 85MM WITH M12 TAP
D
HANDLE WHEEL - 80MM DIA - 10MM
5 1 04-0562 CLEVIS BRACKET-8MM PIN SST 19 1 20-0223 33 1 29-0913 M6 X 50 MM LG SH SST 47 1 39-0424 PIN-16MM HEAD 50MM USABLE LG HOLE
HOLE
6 1 10-4648 SENSOR BRACKET 20 1 24-0104 SMC REGULATOR AR30K-N03-Z 34 3 29-0992 M5 X 8MM LG SETSCREW CUPPT SST 48 1 39-0425 PIN-6MM HEAD 22MM USABLE LG HOLE
D 7 1 10-4649 TRAY SIDE - FRONT 21 1 28-0199 PLFTG-MALE ELBOW 6MM-1/8BSPT 35 1 29-1003 M6 X 6MM LG SETSCREW CUPPT SST 49 3 57-0805 TRANSITION ROLLER
8 1 10-4650 TRAY SIDE - REAR 22 2 28-0334 PLFTG-MALE ELBOW 6MM-3/8BSPT 36 1 29-1014 M8 X 10MM LG SETSCREW CUPPT SST 50 1 57-0806 ROLLER-4IN PRODUCT
9 1 10-4652 DANCER ARM WELDMENT 23 1 28-9105 1/8 X 3-1/2 NIPPLE SST 37 2 29-1128 M6 HEX NUT SST 51 1 57-0808 DANCER ROLLER-3.25 IN
10 1 10-4655 CLEVIS-6MM - M10 HOLE 24 1 28-9534 1/8 UNION ELBOW SST 38 1 29-1348 SCREW ADJ - M16 THREAD 52 1 57-0809 CAM-DANCER SENSOR
11 1 10-4656 CLEVIS-16MM M16 LH 25 1 29-0607 M12 X 25 MM LG FH SST 39 1 31-0041 GAUGE-0-60 PSI 1.50 IN 1/8 NPT 53 1 74-0051 SENSOR
12 1 10-4657 CLEVIS-16MM M16 RH 26 3 29-0651 M5 X 12 MM LG HH SST DIN 933 40 1 32-2644 PLATE - TRAY MOUNT 54 3 99-0876 TY-RAP #10 MOUNTING HOLE
27 6 29-0667 M6 X 10 MM LG HH SST DIN 933 41 2 38-0520 PILLOW BLOCK-20MM PLAIN BRG PLST WASHER FENDER 8MM X 24MM X 2MM
13 1 10-4658 MOUNT- DANCER CYL REAR 55 2 99-0896 SST
28 6 29-0687 M8 X 16 MM LG HH SST DIN 933 BEARING-FLANGE 16MM X 18MM X
14 4 15-0630 SHAFT-16MM X 184.1MM TAPPED M10 42 2 38-0521 56 14 99-1184 8MM ID FLAT WASHER SST
17MM PLST
REPLACEMENT MUFFLER
TT # 28-0504 27
4 21 5
COTTER PIN
INCLUDED 48
WITH THIS PART
C 25 9 C
13
27
18 50 26 54 32
35
57
10 28 56 40
29 57 56
15
REFERENCE
BEARING 38-0523 18
PRESSED INTO EACH 41
END OF THIS PART
52 B
18
B
34
30 17
57
56 32
41
4 PLC'S
18
51
29
46 56
33 37 37
A 57 A
SW
CHECKED BY DATE
TM
M. LOWDER 12/27/07
APPROVED BY DATE
R
M. LOWDER 12/27/07 SIZE PART NO.
00-2957-06
K.POLING 12/7/07 M. LOWDER 12/27/07 SCALE 1:3 D0 NOT SCALE

DRAWING
SHEET 2 of 5
4 3 2 1
ITEM PART
QTY DESCRIPTION
NO. NUMBER
1 1 00-3462 TRANSITION TRAY ROLLER ASSEMBLY
2 1 00-3466 GLUE SEAL COOLER ASSEMBLY
3 1 01-0979 BLOCK-VERTICAL END ROLLER
4 2 04-0561 CYL-25MM X 100MM SR
5 1 04-0562 CLEVIS BRACKET-8MM PIN SST
D
6 1 10-4648 SENSOR BRACKET
7 1 10-4649 TRAY SIDE - FRONT
D 8 1 10-4650 TRAY SIDE - REAR 28 8
9 1 10-4652 DANCER ARM WELDMENT
56 31
10 1 10-4655 CLEVIS-6MM - M10 HOLE
11 1 10-4656 CLEVIS-16MM M16 LH 26
12 1 10-4657 CLEVIS-16MM M16 RH
13 1 10-4658 MOUNT- DANCER CYL REAR 28
14 4 15-0630 SHAFT-16MM X 184.1MM TAPPED M10
56 1
15 1 15-0631 SHAFT-20MM X 270MM FLAT 27 55 31
16 1 15-0632 TIE ROD-HEX-M16 LH - M16 RH 54
17 1 15-0633 SHAFT-20MM X 200MM FLAT
26
18 4 16-0864 SHAFT COLLAR-20MM ID
19 1 20-0223 HANDLE WHEEL - 80MM DIA - 10MM HOLE 54 22
20 1 24-0104 SMC REGULATOR AR30K-N03-Z 53
20
21 1 28-0199 PLFTG-MALE ELBOW 6MM-1/8BSPT 6 14
C 22 2 28-0334 PLFTG-MALE ELBOW 6MM-3/8BSPT C
23 1 28-0504 1/8 BSPT MUFFLER 31 14 7
24 1 28-9105 1/8 X 3-1/2 NIPPLE SST
25 1 28-9534 1/8 UNION ELBOW SST
26 1 29-0607 M12 X 25 MM LG FH SST 44 3 PLC'S 22
27 3 29-0651 M5 X 12 MM LG HH SST DIN 933
23 24
28 6 29-0667 M6 X 10 MM LG HH SST DIN 933
16
29 6 29-0687 M8 X 16 MM LG HH SST DIN 933
39
30 4 29-0688 M8 X 20 MM LG HH SST DIN 933
32 8 29-0704 M10 X 16 MM LG HH SST DIN 933 49 3 PLC'S
16 16 12 47
33 4 29-0705 M10 X 20 MM LG HH SST DIN 933 56
36
34 1 29-0913 M6 X 50 MM LG SH SST
17
11
28
35 3 29-0992 M5 X 8MM LG SETSCREW CUPPT SST B
14
B 37 1 29-1014 M8 X 10MM LG SETSCREW CUPPT SST PRESS FIT
55
31
38 2 29-1128 M6 HEX NUT SST INT0 10-4650 56
39 1 29-1348 SCREW ADJ - M16 THREAD
3 28
40 1 31-0041 GAUGE-0-60 PSI 1.50 IN 1/8 NPT
41 1 32-2644 PLATE - TRAY MOUNT
42 2 38-0520 PILLOW BLOCK-20MM PLAIN BRG PLST
43 2 38-0521 BEARING-FLANGE 16MM X 18MM X 17MM PLST 19
14 31
44 2 38-0522 BEARING-FLANGE 10MM X 12MM X 8MM PLST 38
42
45 3 39-0297 PIN-1.125 CIRCLE COTTER
PRESS FIT
46 3 39-0417 PIN-12MM CLEVIS 200MM USABLE LG HOLE INTO 01-0979
47 1 39-0423 PIN-20MM HEADED 85MM WITH M12 TAP
43 45
PRESS FIT
49 1 39-0425 PIN-6MM HEAD 22MM USABLE LG HOLE INTO 10-4649
50 5 57-0805 TRANSITION ROLLER
51 1 57-0806 ROLLER-4IN PRODUCT
A A
52 1 57-0808 DANCER ROLLER-3.25 IN
SW
53 1 57-0809 CAM-DANCER SENSOR CHECKED BY DATE
54
55
1
3
74-0051
99-0876
SENSOR
TY-RAP #10 MOUNTING HOLE
TM
M. LOWDER 12/27/07
APPROVED BY DATE
R
56 2 99-0896 WASHER FENDER 8MM X 24MM X 2MM SST M. LOWDER 12/27/07 SIZE PART NO.
00-2957-06
57 14 99-1184 8MM ID FLAT WASHER SST DRAWN BY DATE RELEASED BY DATE
58 10 99-1246 8MM ID LOCK WASHER SST K.POLING 12/7/07 M. LOWDER 12/27/07 SCALE 1:3.75 D0 NOT SCALE
DRAWING
SHEET 3 of 5
4 3 2 1
04-0561 CYLINDER SHOWN IN

FULLY RETRACTED POSITION.
A A C
C
57-0809 CAM-DANCER SENSOR

74-0051 SENSOR
REAR VIEW
74-0051 SENSOR 90
A GAP 1.6MM (.063)
A
SW
INITIAL SETTING CHECKED BY DATE
NOTE:
TM
M. LOWDER 12/27/07 TRANSITION TRAY ASSEMBLY
APPROVED BY DATE
ADJUSTMENTS MADE WITH THE 04-0561 R
CYLINDER FULLY RETRACTED. 57-0809 CAM-DANCER SENSOR M. LOWDER 12/27/07 SIZE PART NO.
00-2957-06
SECTION A-A K.POLING 12/7/07 M. LOWDER 12/27/07 SCALE 1:2 D0 NOT SCALE
DRAWING
SHEET 4 of 5
4 3 2 1
ITEM PART SHEET DESCRIPTION
NO. NUMBER 5/QTY.
1 00-3462 1 TRANSITION TRAY ROLLER ASSEMBLY
2 00-3466 1 GLUE SEAL COOLER ASSEMBLY
3 01-0979 1 BLOCK-VERTICAL END ROLLER
4 04-0561 2 CYL-25MM X 100MM SR
5 04-0562 1 CLEVIS BRACKET-8MM PIN SST
D
6 10-4648 1 SENSOR BRACKET
7 10-4649 1 TRAY SIDE - FRONT
D 8 10-4650 1 TRAY SIDE - REAR
9 10-4652 1 DANCER ARM WELDMENT
10 10-4655 1 CLEVIS-6MM - M10 HOLE
2
11 10-4656 1 CLEVIS-16MM M16 LH
12 10-4657 1 CLEVIS-16MM M16 RH
13 10-4658 1 MOUNT- DANCER CYL REAR
14 15-0630 4 SHAFT-16MM X 184.1MM TAPPED M10
15 15-0631 1 SHAFT-20MM X 270MM FLAT
16 15-0632 1 TIE ROD-HEX-M16 LH - M16 RH
17 15-0633 1 SHAFT-20MM X 200MM FLAT
18 16-0864 4 SHAFT COLLAR-20MM ID
19 20-0223 1 HANDLE WHEEL - 80MM DIA - 10MM HOLE 32-2918
20 24-0104 1 SMC REGULATOR AR30K-N03-Z PART OF THE
00-3466 ASSEMBLY
21 28-0199 1 PLFTG-MALE ELBOW 6MM-1/8BSPT
C 22 28-0334 2 PLFTG-MALE ELBOW 6MM-3/8BSPT C
23 28-0504 1 1/8 BSPT MUFFLER
24 28-9105 1 1/8 X 3-1/2 NIPPLE SST
25 28-9534 1 1/8 UNION ELBOW SST
26 29-0607 1 M12 X 25 MM LG FH SST
27 29-0651 3 M5 X 12 MM LG HH SST DIN 933
28 29-0667 6 M6 X 10 MM LG HH SST DIN 933
29 29-0687 6 M8 X 16 MM LG HH SST DIN 933
30 29-0688 4 M8 X 20 MM LG HH SST DIN 933
31 29-0689 4 M8 X 25 HEX HEAD SST DIN 933
32 29-0704 8 M10 X 16 MM LG HH SST DIN 933
33 29-0705 4 M10 X 20 MM LG HH SST DIN 933
34 29-0913 1 M6 X 50 MM LG SH SST
35 29-0992 3 M5 X 8MM LG SETSCREW CUPPT SST B
B 37 29-1014 1 M8 X 10MM LG SETSCREW CUPPT SST
38 29-1128 2 M6 HEX NUT SST
39 29-1348 1 SCREW ADJ - M16 THREAD
99-1184 QTY 2
40 31-0041 1 GAUGE-0-60 PSI 1.50 IN 1/8 NPT PART OF THE
41 32-2644 1 PLATE - TRAY MOUNT 00-3466 ASSEMBLY
42 38-0520 2 PILLOW BLOCK-20MM PLAIN BRG PLST
43 38-0521 2 BEARING-FLANGE 16MM X 18MM X 17MM PLST
20-0000 QTY 2
44 38-0522 2 BEARING-FLANGE 10MM X 12MM X 8MM PLST PART OF THE
45 39-0297 3 PIN-1.125 CIRCLE COTTER
00-3466 ASSEMBLY
46 39-0417 3 PIN-12MM CLEVIS 200MM USABLE LG HOLE
47 39-0423 1 PIN-20MM HEADED 85MM WITH M12 TAP
48 39-0424 1 PIN-16MM HEAD 50MM USABLE LG HOLE
49 39-0425 1 PIN-6MM HEAD 22MM USABLE LG HOLE
50 57-0805 5 TRANSITION ROLLER
51 57-0806 1 ROLLER-4IN PRODUCT
A A
52 57-0808 1 DANCER ROLLER-3.25 IN
53 57-0809 1 CAM-DANCER SENSOR
54 74-0051 1 SENSOR
55 99-0876 3 TY-RAP #10 MOUNTING HOLE
56 99-0896 2 WASHER FENDER 8MM X 24MM X 2MM SST
SW
CHECKED BY DATE
58 99-1246 10 8MM ID LOCK WASHER SST
TM
M. LOWDER 12/27/07
R APPROVED BY DATE
M. LOWDER 12/27/07 SIZE PART NO.
00-2957-06
K.POLING 12/7/07 M. LOWDER 12/27/07 SCALE 1:2 D0 NOT SCALE

DRAWING
SHEET 5 of 5
A
4 3 2 1
ITEM PART
QTY DESCRIPTION
NO. NUMBER
1 1 21-0223 VALVE-1/4 PORTED
D D
4 2 28-0328 1/8 BSPT PIPE PLUG SST
5 1 28-0329 1/4 BSPT PIPE PLUG SST 1 4
6 1 28-0758 1/4 X 1/8 BUSHING SST
7 1 28-0946 VORTEX TUBE COOLER 5
C
C 6
2
4
B
B
SW CHECKED BY
SG
DATE
08-31-09 SEAL COOLER ASSEMBLY A

A TM
APPROVED BY DATE
R
01 SEE ECN 00-3422-01 01/05/10 TEW SG 08-31-09 SIZE PART NO.
00-3422-01

1:1 D0 NOT SCALE
4 3 2 1
ITEM PART NUMBER QTY. DESCRIPTION
NO.
1 00-3422 1 SEAL COOLER ASSEMBLY
2 10-5181 1 COOLER MOUNTING PLATE
3 10-5182 1 COOLER ADJUSTMENT BLOCK
4 20-0098 3 M8 X 20 MM LG KIPP ADJ HANDLE
D 5 28-0176 1 PLFTG-PLUG-IN Y 12MM 4 16 D
6 28-0523 1 PLFTG-UNION Y 4MM 5
7 28-0949 2 FLAT COOLER NOZZLE 8
8 28-0951 3 PLFTG-FEM ELBOW 12MM-1/4 BSPT 8
9 28-9048 1 1/4 X 1/8 BUSHING BRASS
10 29-0639 2 M4 X 35 MM LG HH SST DIN 933
11 29-0688 2 M8 X 20 MM LG HH SST DIN 933 9
12 29-0888 4 M5 X 20 MM LG SH SST
13 32-2917 1 COOLER ADJUSTMENT PLATE 15
3
14 32-2918 1 M8 NUT PLATE 1 15
15 32-2919 2 M5 NUT PLATE
C
C
10
6 16
2 B
11 7
B 7 12 4 PLC'S
16
14
13
REFERENCE PART NUMBER 32-2920 DRILL GUIDE PLATE 4
USED FOR FIELD INSTALLATION OF THIS ASSEMBLY. 16
SW CHECKED BY
K.POLING 12-29-09
DATE
GLUE SEAL COOLER ASSEMBLY A

A TM
APPROVED BY DATE
R
01 SEE ECN 00-3466-01 03/03/10 TEW D.MAY 12-29-09 SIZE PART NO.
00-3466-01

1:3 D0 NOT SCALE
4 3 2 1
ITEM PART REFERENCE: MOTOR ROTATION

QTY DESCRIPTION
NO. NUMBER
3 4 PLC'S CLOCKWISE ROTATION
1 1 00-2955 EXTRUDER EXIT ASSEMBLY IS THE CORRECT ROTATION
3 4 16-0838 SPACER- RND1 X .66 X 1.13 10 4 PLC'S 16
4 1 25-0151 MOTOR-1HP 230/460V 1800 RPM 3 PH 19
D 4 D
6 2 28-0300 PLFTG-UNION TEE 6MM 15
7 1 28-0918 HEATED HOSE- 1/4 X 48 190V
9 2 29-0651 M5 X 12 MM LG HH SST DIN 933
10 4 29-0709 M10 X 40 MM LG HH SST DIN 933
22 4 PLC'S
11 4 29-0736 M16 X 65 MM LG HH SST DIN 933
2
12 4 29-9319 3/8-16 X 1-1/4 LG HH SST 12 4 PLC'S
17
13 1 30-0432 TRANSDUCER 6 COND SHIELDED CA
15 1 30-1188 TEMP PROBE- PRESSURE TRANSDUCER
C
C 16 1 30-1190 FLEX CONDUIT FITTING-3/4 45 DEG ELBOW
17 1 30-1199 TRANSMITTER- PRESS TPT4634
USE 21
18 1 30-1199-A 30-1199 PART A THIS PART COMES NEVER
19 1 32-2612 GS3 EXTRUDER MOUNT WITH THE 30-1199 SEEZE
20 20 FT 40-0141 FIBERGLASS ROPE SEAL 1/4" TRANSMITTER 7
9
21 1 99-0813 GLUE EXTRUDER
13
20
WRAP AROUND THE B
CONNECTION (10 FEET) THIS HEATED HOSE
B WHEN THE HEATED HOSE RUNS ON 190 VOLTS.
IS ATTACHED.
USE NEVER SEEZE
2 PLC'S
REFERENCE: BARREL HEATERS
REPLACEMENT P/N 30-1256.
TWO USED ON EACH EXTRUDER
WRAP THE END OF THE REFERENCE: RUPTURE DISC

1 BARREL WITH ROPE (10FT) REPLACEMENT P/N 99-0885
USE NEVER SEEZ
04
03
SEE ECN 00-3073-04
SEE ECN 00-3073-03
10/28/09
08/24/09
ST
ST
SW CHECKED BY
K.POLING 6/11/08
DATE

A TM
02 SEE ECN 00-3073-02 04-29-09 SDG R

APPROVED BY DATE
01 SEE ECN 00-3073-01 01/27/09 CDS D.MAY 6/11/08 SIZE PART NO.
00-3073-04
REVISIONS TEW 6/11/08 TEW 6/11/08 SCALE

1:6 D0 NOT SCALE
4 3 2 1
ITEM PART
QTY DESCRIPTION
NO. NUMBER
1 1 00-2955 EXTRUDER EXIT ASSEMBLY

7 WRAP AROUND THE CONNECTION
3 4 16-0838 SPACER- RND1 X .66 X 1.13 WHEN THE HEATED HOSE
D 20 IS ATTACHED. D
4 1 25-0151 MOTOR-1HP 230/460V 1800 RPM 3 PH
4
7 1 28-0918 HEATED HOSE- 1/4 X 48 190V
9 2 29-0651 M5 X 12 MM LG HH SST DIN 933
10 4 29-0709 M10 X 40 MM LG HH SST DIN 933
11 4 29-0736 M16 X 65 MM LG HH SST DIN 933
12 4 29-9319 3/8-16 X 1-1/4 LG HH SST 17
16 C
C 13 1 30-0432 TRANSDUCER 6 COND SHIELDED CA
THIS PART COMES WITH
14 1 30-1177 FLEX CONDUIT FITTING-1/2 90 DEG ELBOW THE 30-1199 TRANSMITTER
15 1 30-1188 TEMP PROBE- PRESSURE TRANSDUCER 22
16 1 30-1190 FLEX CONDUIT FITTING-3/4 45 DEG ELBOW 4 PLC'S
17 1 30-1199 TRANSMITTER- PRESS TPT4634 14 2
18 1 30-1199-A 30-1199 PART A 12
19 1 32-2612 GS3 EXTRUDER MOUNT 4 PLC'S
20 20 FT 40-0141 FIBERGLASS ROPE SEAL 1/4" 9
21 1 99-0813 GLUE EXTRUDER 21
B
13
B
4 PLC'S 11
4 PLC'S 23
19 3 4 PLC'S
4 PLC'S 10
SW CHECKED BY
K.POLING 6/11/08
DATE

A TM
APPROVED BY DATE
R
D.MAY 6/11/08 SIZE PART NO.
00-3073-04

TEW 6/11/08 TEW 6/11/08 SCALE
1:7 D0 NOT SCALE
15.7
Schematics
7 6 5 4 3 2 1
8
D D
C
C
B
B
A
A
SW CHECKED BY
LOWDER 06/02/08
DATE
PNEUMATIC SCHEMATIC ROTA-CLIP

TM
R APPROVED BY DATE
GRIGGS 06/02/08
01 SEE ECN 63-0173-01 04-27-09 SDG
63-0173-01

GRIGGS 06/02/08 GRIGGS 06/02/08 1 3
DRAWING SHEET of
7 6 5 4 3 2 1
8
D D
C
C
B
B
A
A
SW CHECKED BY
LOWDER 06/02/08
DATE

TM
R APPROVED BY DATE
GRIGGS 06/02/08
63-0173-01
GRIGGS 06/02/08 GRIGGS 06/02/08 2 3

DRAWING SHEET of
7 6 5 4 3 2 1
8
D D
C
C
B
B
A
A
SW CHECKED BY
LOWDER 06/02/08
DATE

TM
R APPROVED BY DATE
GRIGGS 06/02/08
63-0173-01
GRIGGS 06/02/08 GRIGGS 06/02/08 3 3

DRAWING SHEET of

Rotaclip Planos

Uploaded by

Copyright:

Available Formats

Rotaclip Planos

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Rotaclip Planos

Uploaded by

Copyright:

Available Formats

RCEG-12 Rotaclip Assembly Drawings

15.1 Main Assemblies

15.2 Installation & Spare Parts Kits

Z2209RC Z2209RC Clipper Assembly

15.4 Pneumatic, Electrical & Controls

15.6 GS15-300 Assemblies

J. HITE 9/18/07 J. HITE 11/16/07 1 5

DRAWN BY DATE RELEASED BY DATE

J. HITE 9/18/07 J. HITE 11/16/07 2 5

DRAWN BY DATE RELEASED BY DATE

DRAWN BY DATE RELEASED BY DATE

J. HITE 9/18/07 J. HITE 11/16/07 4 5

DRAWN BY DATE RELEASED BY DATE

J. HITE 9/18/07 J. HITE 11/16/07 5 5

ITEM QTY PART 00-2950 GLUE EXTRUDER ASSY. IS SHOWN

GS15-300 MAIN ASSEMBLY A

02 SEE ECN GS15-300-02 03/04/09 ST R

NO. ZONE DESCRIPTION DATE APPROVED DRAWN BY DATE RELEASED BY DATE

REVISIONS K.POLING 12/10/07 K.POLING 1/9/08 SCALE

GS15-300 MAIN ASSEMBLY A

D.MAY 1/7/08 SIZE PART NO.

DRAWN BY DATE RELEASED BY DATE

01 SEE ECN 55-0237-01 06/20/09 SDG

NAME OF VENDOR VENDOR ADDRESS VENDOR PART NO.

S. GRIGGS 6/24/08 PART NO.

DRAWN BY DATE RELEASED BY DATE

KIT-SPARE PARTS T1209RC

S. GRIGGS 6/24/08 SIZE

DRAWN BY DATE RELEASED BY DATE

01 SEE ECN 55-0251-01 01/16/09 CDS

NAME OF VENDOR VENDOR ADDRESS VENDOR PART NO.

S. GRIGGS 6/24/08 PART NO.

DRAWN BY DATE RELEASED BY DATE

KIT-SPARE PARTS GS15-300 A

02 SEE ECN 55-0252-02 11/20/08 CDS R

01 SEE ECN 55-0252-01 09/16/08 ST S. GRIGGS 6/24/08 SIZE PART NO.

NO. ZONE DESCRIPTION DATE APPROVED DRAWN BY DATE RELEASED BY DATE

REVISIONS J. HITE 6/24/08 J. HITE 6/24/08 SCALE

01 SEE ECN 55-0253-01 05/20/09 SDG

NAME OF VENDOR VENDOR ADDRESS VENDOR PART NO.

S. GRIGGS 6/24/08 PART NO.

DRAWN BY DATE RELEASED BY DATE

KIT-INSTALL ROTA-CLIP 100T A

02 SEE ECN 55-0254-02 05/20/09 SDG R

NO. ZONE DESCRIPTION DATE APPROVED DRAWN BY DATE RELEASED BY DATE

REVISIONS J. HITE 7/1/08 J. HITE 7/1/08 SCALE

SPARE PARTS KIT - CTC SPLICER

DRAWN BY DATE RELEASED BY DATE

KIT-SPARE PARTS ROTA-CLIP A

GRIGGS 04/14/09 SIZE PART NO.

NO. ZONE DESCRIPTION DATE APPROVED DRAWN BY DATE RELEASED BY DATE

REVISIONS S.GRIGGS 04/14/09 GRIGGS 04/14/09 SCALE

ITEM SHEET PART DESCRIPTION

15 1 16-0938 SPACER-.176 RND .875 X .510 DELRIN

04 SEE ECN T1209RC-04 04/07/09 CDS CHECKED BY DATE

SIZE PART NO.

ITEM SHEET PART ITEM SHEET PART ITEM SHEET PART

6 TIPPER TIE S. GRIGGS 7/30/07

SIZE PART NO.