Datasheet

Panel Mount

GN Series
AC Output SSRs
Current rating 10 and 125 Amps
Output voltage 24-280 VAC and 48-660 VAC
Available with or without IP20 touch-safe cover
LED Input Status Indicator
UL Approved, CE Compliant to EN60950-1
Improved SEMS screw and washer
Redesigned housing with anti-rotation barriers
EMC Compliant to level 3

For Generation 3 datasheet click here

PRODUCT SELECTION
Control Voltage 10 A 25 A 50 A 75 A 100 A 125 A
3-32 VDC 84134000 84134010 84134020 84134030 84134040 84134080
18-36 VAC 84134002 84134012 84134022 84134032 84134042 84134082
90-280 VAC 84134001 84134011 84134021 84134031 84134041 84134081

Operating Voltage
AVAILABLE OPTIONS 0: 24-280 VAC/Zero Voltage Turn-On
1: 48-660 VAC/Zero Voltage Turn-On
2: 24-280 VAC/Instantaneous Turn-On
3: 48-660 VAC/Instantaneous Turn-On
Thermal Pad
Blank: Not included
Series H: Included

8413 4 0 1 U
0 H
Touch Safe Cover Rated Load Control Voltage
4: Not included (IP00) Current 0: 3-32 VDC
Required for valid part number 7: Included (IP20) 0: 10 Amps 1: 90-280 VAC
For options only and not required for valid part number 1: 25 Amps 2: 18-36 VAC
> Not all part number combinations are available. 2: 50 Amps
Contact Crydom Technical Support for information on 3: 75 Amps
the availability of a specific part number. 4: 100 Amps
8: 125 Amps

OUTPUT SPECIFICATIONS (1)

Description 280 VAC 660 VAC
Operating Voltage (47-440Hz) [Vrms] 24-280 48-660
Transient Voltage [Vpk] (2) 600 1200
Maximum Off-State Leakage Current @ Rated Voltage [mArms] 0.1 0.25
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/sec] 500 500

OUTPUT SPECIFICATIONS (1)

Description 10 A 25 A 50 A 75 A 100 A 125 A
Maximum Load Current [Arms] (3) 10 25 50 75 100 125
Minimum Load Current [mArms] 500 50 100 100 100 100
Maximum 1 Cycle Surge Current (50/60Hz) [Apk] 150/175 275/300 710/750 1050/1100 1120/1200 1600/1700
1 Second surge current (Apk. Ta=25C) 50/60 Hz 50 85 150 225 300 375
Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.35 1.35 1.35 1.3 1.3 1.25
Thermal Resistance Junction to Case (Rjc) [C/W] 0.4 0.4 0.25 0.16 0.16 0.11
Maximum 1/2 Cycle I t for Fusing (50/60Hz) [A sec] 110/120 380/370 2520/2320 5500/5000 6270/6000 12800/12050
Minimum Heat Sink for Rated Current @ 40C [C/W] 5 2 1 0.7 0.5 0.5

Do not forget to visit us at: www.crydom.com

Copyright 2016 Crydom Inc. Specifications subject to change without notice.
 Datasheet
Panel Mount

INPUT SPECIFICATIONS (1)

Description 8413xxx0 8413xxx2 8413xxx1
Control Voltage Range 3-32 VDC (4) 18-36 VAC 90-280 VAC (5)
Maximum Reverse Voltage -32 VDC - -
Minimum Turn-On Voltage 3 VDC (4) 18 VAC 90 VAC
Must Turn-Off Voltage 1 VDC 4 VAC 10 VAC
Minimum Input Current (for on-state) [mA] 10 13 6
Maximum Input Current [mA] 15 15 10
Nominal Input Impedance [Ohms] Current Regulated
Maximum Turn-On Time [msec] 1/2 Cycle (6) 20 20
Maximum Turn-Off Time [msec] 1/2 Cycle 30 30

GENERAL SPECIFICATIONS (1)

Description Parameters
Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms
Minimum Insulation Resistance (@ 500 VDC) 109 Ohms
Maximum Capacitance, Input/Output 8 pF
Ambient Operating Temperature Range (7) -40 to 80 C
Ambient Storage Temperature Range -40 to 125 C
Weight (typical) 2.53 oz (72 g)
Housing Material UL94 V-0
Baseplate Material Aluminum
Input Terminal Screw Torque Range (in-lb/Nm) 13-15 /1.5-1.7
Load Terminal Screw Torque Range (in-lb/Nm) 18-20 / 2-2.2
SSR Mounting Screw Torque Range (in-lb/Nm) 18-20 / 2-2.2
Humidity per IEC60068-2-78 93% non-condensing
LED Input Status Indicator Green
MTBF (Mean Time Between Failures) at 40C ambient temperature (8) 11,641,553 hours (1,328 years)
MTBF (Mean Time Between Failures) at 60C ambient temperature (8) 7,210,376 hours (823 years)

GENERAL NOTES
(1) All parameters at 25C unless otherwise specified.
(2) Output will self trigger between 450-600 Vpk / 900-1200 Vpk for 280 VAC/660 VAC models not suitable for capacitive loads.
(3) Heat sinking required, see derating curves.
(4) 4-32 VDC for 48-660 VAC models.
(5) For ambient temperatures above 40C the maximum control voltage must not exceed 250 VAC.
(6) Turn-on time for Instantaneous turn-on versions is 0.1 msec.
(7) AC models operating range is -20 to 80C.
(8) All parameters at 50% power rating and 100% duty cycle (contact Crydom tech support for detailed report).
(9) Load can be wired to either SSR output terminal 1 or 2.
(10) For single surge pulse Tc=25C; Tj=125C. For AC Output SSRs, AC Rms value of surge current equals the peak value divided by 2 (1.414).

For additional information or specific questions, contact Crydom Technical Support.

Do not forget to visit us at: www.crydom.com

Copyright 2016 Crydom Inc. Specifications subject to change without notice.
 Datasheet
Panel Mount

WIRING DIAGRAM
AC
V

Load (9) Recommended Wire Sizes

Wire Size Wire Pull-Out
1 ( ) 2 ( ) Terminals
(Solid / Stranded) Strength (lb)[N]
24 AWG (0.2 mm2) / 0.2 [minimum] 10 [44.5]
Input
2 x 12 AWG (3.3 mm2) / 3.3 [maximum] 90 [400]
1 OUTPUT 2
S O L I D S TAT E R E L AY
20 AWG (0.5 mm2) / 0.518 [minimum] 30 [133]
Output 2 x 10 AWG (5.3 mm2) / 5.3 110 [490]
4 INPUT 3
2 x 8 AWG (8.4 mm2) / 8.4 [maximum] 90 [400]

4 ( / ) 3 (+ / )

EQUIVALENT CIRCUIT BLOCK DIAGRAMS

Input Current vs Input Voltage
Standard Regulated DC Input
GN Series DC Control 14
12
-DC 4 AC
Input Current (mA)
1
10
8
INPUT

OUTPUT

Trigger
Circuit 6
4
2
+DC 3 2 AC
Current 0
Limiter 0 5 10 15 20 25 30 35
DC Input Voltage

Input Current vs Input Voltage

GN Series AC Control Standard Regulated AC Input
7
Current 6
Input Current (mA)

Limiter
5
AC 4 1 AC
4
3
OUTPUT
INPUT

AC/DC Trigger
Converter 2
Circuit
1
0
AC 3 2 AC 0 50 100 150 200 250 300
AC Input Voltage

Input Current vs Input Voltage

Regulated AC Input Option E
16
14
Input Current (mA)

12
10
8
6
4
2
0
0 5 10 15 20 25 30 35
AC Input Voltage

Do not forget to visit us at: www.crydom.com

Copyright 2016 Crydom Inc. Specifications subject to change without notice.
 Datasheet
Panel Mount

MECHANICAL SPECIFICATIONS (1)

Tolerances: 0.02 in / 0.5 mm
All dimensions are in: inches [millimeters]

Screw Termination, IP00 Screw Termination, IP20

1.1 0.89 1.10 Mounting
[27.9] Mounting [22.6] [27.9] Hole/Slot
0.49 Hole/Slot 0.49 0.19 [4.9]
[12.4] 0.19 [4.9] [12.4] DIA.
DIA.

1.88 1.7 2.25 1.88 1.7 2.32 2.25

[47.6] [43.2] [57.3] [47.6] [43.2] [58.8] [57.3]

1.0
1.0 [25.4] 1.22
[25.4] [30.9]
1.75
1.75 [44.5]
[44.5]

THERMAL DERATE INFORMATION

10 A 25 A 50 A
3C/W 5C/W 1C/W 1.5C/W 2C/W 3C/W 0.5C/W 0.7C/W 1C/W 1.5C/W 2C/W

10 25 50
Load Current (Amps)
Load Current (Amps)
Load Current (Amps)

8 20 40

6 15 30

4 10 20

2 5 10

0 0 0
20 25 30 35 40 45 50 55 60 65 70 75 80 20 25 30 35 40 45 50 55 60 65 70 75 80 20 25 30 35 40 45 50 55 60 65 70 75 80
Ambient Temperature (C) Ambient Temperature (C) Ambient Temperature (C)

75 A 100 A 125 A
0.5C/W 0.7C/W 1C/W 1.5C/W 0.4C/W 0.5C/W 0.7C/W 1C/W 0.4C/W 0.5C/W 0.7C/W 1C/W
75 100 120
90
Load Current (Amps)
Load Current (Amps)

Load Current (Amps)

60 80 100
70 80
45 60
50 60
30 40
30 40
15 20 20
10
0 0 0
20 25 30 35 40 45 50 55 60 65 70 75 80 20 25 30 35 40 45 50 55 60 65 70 75 80 20 25 30 35 40 45 50 55 60 65 70 75 80
Ambient Temperature (C) Ambient Temperature (C) Ambient Temperature (C)

Do not forget to visit us at: www.crydom.com

Copyright 2016 Crydom Inc. Specifications subject to change without notice.
 Datasheet
Panel Mount

SURGE CURRENT INFORMATION

Single Pulse (10)

10 A 25 A
160 300
Surge Current (Amp) AC Peak

Surge Current (Amp) AC Peak

140
250
120
200
100
80 150
60
100
40
50
20
0 0
0.01 0.1 1 10 0.01 0.1 1 10
Surge Duration (secs) Surge Duration (secs)

50 A 75 A
700 1100
1000
Surge Current (Amp) AC Peak

Surge Current (Amp) AC Peak

600
900
500 800
700
400 600
300 500
400
200 300
200
100
100
0 0
0.01 0.1 1 10 0.01 0.1 1 10
Surge Duration (secs) Surge Duration (secs)

100 A 125 A
1200 1600
Surge Current (Amp) AC Peak

Surge Current (Amp) AC Peak

1400
1000
1200
800
1000
600 800
600
400
400
200
200
0 0
0.01 0.1 1 10 0.01 0.1 1 10
Surge Duration (secs) Surge Duration (secs)

Do not forget to visit us at: www.crydom.com

Copyright 2016 Crydom Inc. Specifications subject to change without notice.
 Datasheet
Panel Mount

AGENCY APPROVALS
EN60950-1: Meets the requirements of sections1.5: 1,7: 2.9: 2.10.5.3: 4.2: 4.5: 4.7:
Certified according to EN 62314:2006
IEC 61000-4-2 Electrostatic Discharge Level 3
IEC 61000-4-4 Electrically Fast Transients Level 3
IEC 61000-4-5 Electrical Surges Level 3

E79183 LR 38595

ACCESSORIES

Recommended Accessories

Cover Hardware Heat Sink Thermal Resistance Lug Terminal Thermal Pad
Kit Part No. [C/W]
KS101 HK1 HS501DR 5.0 TRM1 HSP-1
HK4 HS301 / HS301DR 3.0 TRM6 HSP-2
HS251 2.5
HS201 / HS201DR 2.0
HS202 / HS202DR 2.0
HS172 1.7
HS151 / HS151DR 1.5
HS122 / HS122DR 1.2
HS103 / HS103DR 1.0
HS101 1.0
HS073 0.7
HS072 0.7
HS053 0.5
HS033 0.36
HS023 0.25

Rev. 092816

Do not forget to visit us at: www.crydom.com

Copyright 2016 Crydom Inc. Specifications subject to change without notice.
 Datasheet
Panel Mount

DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO /

HAZARD OF RIESGO DE RISQUE DE GEFAHR EINES RISCHIO DI
ELECTRIC DESCARGA DESCHARGE ELEKTRISCHE SCOSSA
SHOCK, ELECTRICA O ELECTRIQUE N SCHLAGES ELETTRICA O
EXPLOSION, EXPLOSION. OU EXPLOSION ODER EINER DELLESPLOSI
OR ARC FLASH. Eteindre EXPLOSION. ONE.
Desconectar
Disconnect all todos los toutes les Stellen Sie Spenga tutta
power before suministros de sources jeglichen l'alimentazion
Strom ab, der

installing or energia a este d'nergie de e che fornisce
working with equipo antes cet appareil dieses Gert questa
this equipment. de trabajar avant de versorgt, bevor apparecchiatu
con este equipo. travailler Sie an dem ra prima del
Verify all Gert Arbeiten lavorare a questa
dessus de cet
connections Verificar todas durchfhren
appareil apparecchiatu ra
and replace all las conexiones
Vor dem
covers before y colocar todas Vrifier tous Verificare tutti
Drehen auf
turning on las tapas antes connections, et i collegamenti
Energie alle
power. de energizer remettre tous e sostituire
Anschlsse
el equipo. couverts en tutte le coperture
Failure to follow berprfen
olace avant de prima della
these und alle
El mettre sous rotazione
instructions will Abdeckungen
incumplimiento sull'alimentazi one
result in death de estas De non-suivi de ersetzen.
or serious injury. instrucciones ces instructions Unterlassung L'omissione di
puede provocar provoquera la dieser seguire queste
la muerte o mort ou des Anweisungen istruz ioni
lesiones serias. lsions srieuses knnen zum provocher la
srieuses. Tode oder zu morte o di
schweren lesioni serie
Verletzungen
fhren.

WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA /

RISK OF MATERIAL DAMAGE AND HOT RISQUE DE DOMMAGE MATERIEL ET DE GEFAHR VON MATERIALSCHDEN UND
ENCLOSURE SURCHAUFFE DU BOITIER GEHUSEERHITZUNG

The product's side panels may be hot, allow Les panneaux latraux du produit peuvent tre Die Seitenwnde knnen hei sein. Lassen Sie
the product to cool before touching. chauds. Laisser le produit refroidir avant de le das Produkt abkhlen, bevor Sie es berhren.
Follow proper mounting instructions including toucher. Beachten Sie die Montageanweisungen,
torque values. Respecter les consignes de montage, et Fhren Sie keine Flssigkeiten oder
Do not allow liquids or foreign objects to enter notamment les couples de serrage. Fremdkrper in das Produkt ein.
this product. Ne pas laisser pntrer de liquide ni de corps
trangers l'intrieur du produit.
Le non-respect de cette directive peut entraner, Die Nichtbeachtung dieser Anweisung kann
Failure to follow these instructions can result in des lsions corporelles graves ou des
serious injury, or equipment damage. Krperverletzung oder Materialschden
dommages matriels. zur Folge haben.

RIESGO DE DAOS MATERIALES Y DE

RISCHIO DI DANNI MATERIALI E D'INVOLUCRO
SOBRECALENTAMIENTO DE LA UNIDAD CALDO

Los paneles laterales del producto pueden I pannelli laterali dell'apparecchio possono
estar calientes. Esperar que el producto se scottare; lasciar quindi raffreddare il prodotto
enfre antes de tocarlo. prima di toccarlo.
Respetar las instrucciones de montaje, y en
Seguire le istruzioni di montaggio corrette.
particular los pares de apretado. Non far entrare liquidi o oggetti estranei in questo
No dejar que penetren lquidos o cuerpos apparecchio.
extraos en el producto.
La mancata osservanza di questa precauzione pu
Si no se respetan estas precauciones pueden causare gravi rischi per l'incolumit personale o
producirse graves lesiones, daos materiales. danni alle apparecchiature.

Do not forget to visit us at: www.crydom.com

Copyright 2016 Crydom Inc. Specifications subject to change without notice.
 Datasheet
Panel Mount

ANNEX - ENVIROMENTAL INFORMATION

The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with Peoples Republic of China
Electronic Industry Standard SJ/T11364 2006, Marking for Control of Pollution Caused by Electronic Information Products.

Part Toxic or hazardous Substance and Elements

Name
Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated
(Pb) (Hg) (Cd) Chromium biphenyls diphenyl ethers
(Cr (VI)) (PBB) (PBDE)

Semiconductor die
Solder

SJ/T11364 - 2006,

(Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE)

50

Do not forget to visit us at: www.crydom.com

Copyright 2016 Crydom Inc. Specifications subject to change without notice.
Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Crydom:
84134010 84134011 84134020 84134021 84134110 84134111 84134120 84134121 84137010 84137011
84137020 84137021 84137110 84137111 84137120 84137121 84134000 84134001 84134030 84134031
84134032 84134040 84134112 84134122 84134130 84134131 84134140 84134141 84134180 84134182
84134200 84134210 84134220 84134310 84134320 84134330 84134340 84134380 84137000 84137031
84137100 84137130 84137131 84137140 84137180 84137210 84137220 84137380 84134221 84137221
84137001 84137200 84134300 84134080 84137141 84137080 84137142 84137181 84134012 84137240
84137280 84134181 84134750H 84137042 84137040 84137112 84137230 84134002 84137310 84134211
84137011H 84137332 84137130H 84137010H 84137382 84137111H 84137220H 84134180H 84137210H
84137020H 84137121H 84137322 84134020H 84137302 84137180H 84137211 84137342 84134021H
84134220H 84134120H 84137312 84137300 84137102 84137122 84137101 84137330 84137132 84134102
84137002 84137320