PTS 3.

3 C
Three-phase, fully automatic test system with class 0.05 ref-
erence standard and integrated three-phase current and volt-
age source

The PTS 3.3 C portable test system consists of an integrated Functions

three-phase current and voltage source and a three-phase elec-
Independent generation of single or three-phase loading con-
tronic reference standard of accuracy class 0.05%. Characteristic
ditions for verification of meters
features of the PTS 3.3 C are its wide measuring range, high ac-
Active, reactive and apparent energy measurement for three
curacy and high tolerance to unwanted external influences.
phase, 3 or 4-wire, systems with integrated error calculator
The PTS 3.3 C allows the monitoring of meter installations as well and pulse output
as analysis of the local mains conditions. Vector diagram, harmonics spectrum, wave form and rotary
Advantages field display for analysis of the mains conditions
Easy verification of meters under precise load conditions, us- Burden measurement of Current Transformer (CT) and Po-
ing the built-in, compact, current and voltage source tential Transformer (PT)
Automatic operation with predefined load points without the Application
need for an external PC On site meter measurements
Exchangeable Compact Flash (CF) memory card for meas- Verification of energy registration
urement results and customer data Verification of the circuit load conditions
Display of vector diagram and phase sequence for analysis of
the supply conditions Options
User-friendly system for data input and operation of combined Software CALSOFT
source and reference meter Error compensated clip-on CTs up to100 A
The system may be used either as a stand-alone reference
standard meter, or together with the integrated power source
 Power source
setup menu
Adjustment
Harmonics with regulators
menu
Harmonics
analyses
Error
Vector measurement
diagram Burden
measurement

Portable Power Source

Portable Reference Standard

Customer
address
Other checks
Print input
preview

Energy type
test step
Sequence
Result setup menu
menu

Storage and printout

of results together with
administrative data set (ADS)

Automatic Test Run

Technical Data PTS 3.3 C
123
Power / Energy Voltage: 30 V 480 V (L - N) E [%]
General
Measuring Quantity / Input I Range Class 0.05
Auxiliary voltage: 88 VACmin ... 264 VACmax, 47 63 Hz
Power consumption: 400 VAmax Active (P), Apparent (S) Power / Energy
Housing: Metal, rubber protectors Direct 1A/10A or 120A 40 mA 120 A 0.05
Dimensions: W 465 x D 245 x H 365 mm 1 mA 40 mA 0.05
Weight: approx. 18 kg Clamp-on CT100A 500 mA 100 A 0.2
Operation temperature: -10 C +50 C 20 mA 500 mA 1.0
Storage temperature: -20 C +60 C
Reactive (Q) Power / Energy
Relative humidity: 85% at Ta 21C
95% at Ta 25C, 30 days / year spread Direct 1A/10A or 120A 40 mA 120 A 0.05
1 mA 40 mA 0.05
Safety CE certified Clamp-on CT 100A 500 mA 100 A 0.4
Isolation protection: IEC 61010-1:2001 20 mA 500 mA 1.0
Measurement Category: 300 V CAT III, 600 V CAT II
Degree of protection: IP-20 Influence of external magnetic 0.07 % / 0.5 mT 3
fields (45 Hz 66 Hz):
Voltage Source TC [%/C] 3
Range (phase - neutral): 30 V 480 V Temperature coefficient (TC): Range
Output power (per phase): 30 VA 0 C ... +40C 0.0025
Internal ranges (Smax / Imax): 300 V 480 (600) V (30 VA / 0.05 A) -10 C ... +50C 0.0040
150 V 300 V (30 VA / 0.10 A)
75 V 150 V (30 VA / 0.20 A)
124
30 V 75 V (30 VA / 0.40 A) CT Burden E [%]
Distortion factor: < 0.8 % I - Input / Range U (L1, L2, L3, N)
Resolution: 0.1 V
Direct 1A/10A
Accuracy: 0.3 % (45 Hz 100 Hz)
Stability: 0.03 % (30 min) / 0.1 % (1 h) 40 mA 12 A 400 mV 5V 0.55
Bandwidth: 30 2000 Hz (3 dB) 40 mA 12 A 20 mV 400 mV 0.05 + 0.5
Clamp-on CT 100A
Current Source
500 mA 100 A 400 mV 5V 0.7
Range (per phase): 1 mA 120 A
Output power (per phase): 60 VA 500 mA 100 A 20 mV 400 mV 0.2 + 0.5
Internal ranges (Smax / Umax): 10 A 120 A (60 VA / 0.5 V)
1 A 10 A (25 VA / 2.5 V) PT Burden E [%] 1 2 4
1 mA 1 A (10 VA / 10 V)
I - Input / Range U (L1, L2, L3, N)
Distortion factor: < 0.8 %
Resolution: min. 1 mA Direct 1A/10A
Accuracy: 0.5 % (45 Hz 100 Hz) 40 mA 12 A 30 V 480 V 0.1
Stability: 0.03 % (30 min) / 0.1 % (1 h) 1 mA 40 mA 30 V 480 V 0.05 + 0.05
Bandwidth: 30 1000 Hz (3 dB) Clamp-on CT 100A
Phase angle: -180.0 +180.0
20 mA 500 mA 30 V 480 V 1.05
Resolution: 0.1 (45 100 Hz) / 1 (>100 Hz)
Frequency: 45 Hz 400 Hz
Resolution: 0.1 Hz (45 100 Hz) / 1 Hz (>100 Hz) Notes
1
x.x :Related to the measuring value
Reference Standard - Measurement Range x.x :Related to the measuring range final value (full scale, FS),
E(M) = FS/M * x.x (e.g. 0.05, FS =40 mA: E(10mA) = 40/10*0.05=0.2 %)
Measuring Quantity Range Input / Sensor 2
Fundamental frequency in the range 45 66 Hz
3
Voltage (phase - neutral) 20 mV 480 V L1, L2, L3, N S: x.x; P,Q: x.x / PF (related to apparent power), 3- and 4-wire networks
U1, U2, U3, N 4
E[%]: Accuracy of operating burden Sn [VA]
Current 1 mA 12 A 1A/10A (I1, I2, I3)
Pulse Input Suitable for scanning head type SH 2003
10 mA 120 A 120A (I1, I2, I3)
20 mA 100 A Clamp-on CT 100A Input level: 4 12 VDC (24 VDC)
Input frequency: max. 200 kHz
Reference Standard - Measurement Accuracy Input supply: 12 VDC (I < 60 mA)

Voltage / Current E [%] 1 2 Pulse Output

Measuring Quantity Range Class 0.05 Output level: 5V
Voltage 30 V 480 V 0.05 Pulse length: 1s
Meter constant
5V 30 V 0.05
Active, Reactive, Apparent C = 72000000 / (In * Un) [ / Wh]
Current direct 1A/10A, 120A 40 mA 120 A 0.05 [imp/Wh(varh,VAh)] The meter constant depends on the highest
1 mA 40 mA 0.05 selected internal ranges of In, Un.
Current clamp-on CT 100A 500 mA 100 A 0.2 Internal current ranges In [A]
20 mA 500 mA 1.0 Direct 1A/10A 0.004 0.012 0.04 0.12
Burden Voltage(L1,L2,L3,N) 400 mV 5V 0.5 0.4 1.2 4 12
20 mV 400 mV 0.5 Direct 120A 0.04 0.12 0.4 1.2
4 12 40 120
Frequency / Phase Angle / Power Factor E
Clamp-on CT 100A 0.8 4 20 100
Measuring Quantity Range Internal voltage ranges Un [V]
Frequency (f) 40 Hz 70 Hz 0.01 Hz L1,L2,L3,N / U1,U2,U3,N 60 120 240 480
Phase Angle (
) 0.00 359.99 0.1 Example: In = 12A, Un = 240V
Power Factor (PF) -1.000 +1.000 0.002 C = 72000000 / (12 * 240) = 25000
Output frequency: C = C / 3600 [imp/Ws(vars, VAs)]
fo = C *P(Q, S)
fmax = 72000000 / (12 * 240 * 3600) *
3 * 12 * 240 = 60000 [imp/s]

Edition 08.2009