Hef40106b PDF

HEF40106B
Hex inverting Schmitt trigger

Rev. 8 10 December 2015 Product data sheet
1. General description
The HEF40106B provides six inverting buffers. Each input has a Schmitt trigger circuit.
The inverting buffer switches at different points for positive-going and negative-going
signals. The difference between the positive voltage (VT+) and the negative voltage (VT)
is defined as hysteresis voltage (VH).
The HEF40106B may be used for enhanced noise immunity or to square up slowly
changing waveforms.
It operates over a recommended VDD power supply range of 3 V to 15 V referenced to VSS

(usually ground). Unused inputs must be connected to VDD, VSS, or another input.
2. Features and benefits

Schmitt trigger input discrimination
Fully static operation
5 V, 10 V, and 15 V parametric ratings
Standardized symmetrical output characteristics
Specified from 40 C to +125 C
Complies with JEDEC standard JESD 13-B
3. Applications
Wave and pulse shapers
Astable multivibrators
Monostable multivibrators
4. Ordering information
Table 1. Ordering information
All types operate from 40 C to +125 C
Type number Package
Name Description Version
HEF40106BT SO14 plastic small outline package; 14 leads; body width 3.9 mm SOT108-1
HEF40106BTT TSSOP14 plastic thin shrink small outline package; 14 leads; body width 4.4 mm SOT402-1
Nexperia HEF40106B
5. Functional diagram
$ <

$ <

$ <

$ <

$ <

$ <
$ <
PQD PQD
Fig 1. Functional diagram Fig 2. Logic diagram (one inverting buffer)
6. Pinning information
6.1 Pinning
+()%
$ 9''
< $
$ <
< $
$ <
< $
966 <
DDO
Fig 3. Pin configuration
HEF40106B All information provided in this document is subject to legal disclaimers. Nexperia B.V. 2017. All rights reserved
Product data sheet Rev. 8 10 December 2015 2 of 15

Nexperia HEF40106B
6.2 Pin description

Table 2. Pin description
Symbol Pin Description
1A to 6A 1, 3, 5, 9, 11, 13 input
1Y to 6Y 2, 4, 6, 8, 10, 12 output
VDD 14 supply voltage
VSS 7 ground (0 V)
7. Functional description
Table 3. Function table[1]
Input Output
nA nY
L H
H L
[1] H = HIGH voltage level; L = LOW voltage level.
8. Limiting values
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to VSS = 0 V (ground).
Symbol Parameter Conditions Min Max Unit
VDD supply voltage 0.5 +18 V
IIK input clamping current VI < 0.5 V or VI > VDD + 0.5 V - 10 mA
VI input voltage 0.5 VDD + 0.5 V
IOK output clamping current VO < 0.5 V or VO > VDD + 0.5 V - 10 mA
II/O input/output current - 10 mA
IDD supply current - 50 mA
Tstg storage temperature 65 +150 C
Tamb ambient temperature 40 +125 C
Ptot total power dissipation Tamb = 40 C to +125 C
SO14 [1] - 500 mW
TSSOP14 [2] - 500 mW
P power dissipation per output - 100 mW
[1] For SO14 packages: above Tamb = 70 C, Ptot derates linearly with 8 mW/K.
[2] For TSSOP14 packages: above Tamb = 60 C, Ptot derates linearly with 5.5 mW/K.

Nexperia HEF40106B
9. Recommended operating conditions

Table 5. Recommended operating conditions
Symbol Parameter Conditions Min Max Unit
VDD supply voltage 3 15 V
VI input voltage 0 VDD V
Tamb ambient temperature in free air 40 +125 C
10. Static characteristics

Table 6. Static characteristics
VSS = 0 V; VI = VSS or VDD; unless otherwise specified.
Symbol Parameter Conditions VDD Tamb = 40 C Tamb = +25 C Tamb = +85 C Tamb = +125 C Unit
Min Max Min Max Min Max Min Max
VOH HIGH-level IO < 1 A 5V 4.95 - 4.95 - 4.95 - 4.95 - V
output voltage 10 V 9.95 - 9.95 - 9.95 - 9.95 - V
15 V 14.95 - 14.95 - 14.95 - 14.95 - V
VOL LOW-level IO < 1 A 5V - 0.05 - 0.05 - 0.05 - 0.05 V
output voltage 10 V - 0.05 - 0.05 - 0.05 - 0.05 V
15 V - 0.05 - 0.05 - 0.05 - 0.05 V
IOH HIGH-level VO = 2.5 V 5V - 1.7 - 1.4 - 1.1 - 1.1 mA
output current VO = 4.6 V 5V - 0.64 - 0.5 - 0.36 - 0.36 mA
VO = 9.5 V 10 V - 1.6 - 1.3 - 0.9 - 0.9 mA
VO = 13.5 V 15 V - 4.2 - 3.4 - 2.4 - 2.4 mA
IOL LOW-level VO = 0.4 V 5V 0.64 - 0.5 - 0.36 - 0.36 - mA
output current VO = 0.5 V 10 V 1.6 - 1.3 - 0.9 - 0.9 - mA
VO = 1.5 V 15 V 4.2 - 3.4 - 2.4 - 2.4 - mA
II input leakage 15 V - 0.1 - 0.1 - 1.0 - 1.0 A
current
IDD supply current all valid input 5 V - 0.25 - 0.25 - 7.5 - 7.5 A
combinations; 10 V - 0.5 - 0.5 - 15.0 - 15.0 A
IO = 0 A
15 V - 1.0 - 1.0 - 30.0 - 30.0 A
CI input - - - 7.5 - - - - pF
capacitance

Nexperia HEF40106B
11. Dynamic characteristics

Table 7. Dynamic characteristics
Tamb = 25 C; CL = 50 pF; tr = tf 20 ns; wave forms see Figure 4; test circuit see Figure 5; unless otherwise specified.
Symbol Parameter Conditions VDD Extrapolation formula[1] Min Typ Max Unit
tPHL HIGH to LOW nA or nB to nY 5 V 63 ns + (0.55 ns/pF)CL - 90 180 ns
propagation delay 10 V 29 ns + (0.23 ns/pF)CL - 35 70 ns
15 V 22 ns + (0.16 ns/pF)CL - 30 60 ns
tPLH LOW to HIGH nA or nB to nY 5 V 58 ns + (0.55 ns/pF)CL - 75 150 ns
propagation delay 10 V 29 ns + (0.23 ns/pF)CL - 35 70 ns
15 V 22 ns + (0.16 ns/pF)CL - 30 60 ns
tTHL HIGH to LOW output nY to LOW 5V 10 ns + (1.00 ns/pF)CL - 60 120 ns
transition time 10 V 9 ns + (0.42 ns/pF)CL - 30 60 ns
15 V 6 ns + (0.28 ns/pF)CL - 20 40 ns
tTLH LOW to HIGH output nA or nB to 5V 10 ns + (1.00 ns/pF)CL - 60 120 ns
transition time HIGH 10 V 9 ns + (0.42 ns/pF)CL - 30 60 ns
15 V 6 ns + (0.28 ns/pF)CL - 20 40 ns
[1] Typical value of the propagation delay and output transition time can be calculated with the extrapolation formula (CL in pF).
Table 8. Dynamic power dissipation

VSS = 0 V; tr = tf 20 ns; Tamb = 25 C.
Symbol Parameter VDD Typical formula where:
PD dynamic power 5V PD = 2300 fi + (fo CL) VDD (W) 2 fi = input frequency in MHz;
dissipation 10 V PD = 9000 fi + (fo CL) VDD2 (W) fo = output frequency in MHz;
15 V PD = 20000 fi + (fo CL) VDD2 (W) CL = output load capacitance in pF;
(fo CL) = sum of the outputs;
VDD = supply voltage in V.

Nexperia HEF40106B
12. Waveforms
WU WI
9,

LQSXW 90

9
W3+/ W3/+
92+

RXWSXW 90

92/
W7+/ W7/+
DDJ
Measurement points are given in Table 9.

Logic levels: VOL and VOH are typical output voltage levels that occur with the output load.
tr, tf = input rise and fall times.
Fig 4. Propagation delay and output transition time
Table 9. Measurement points

Supply voltage Input Output
VDD VM VM
5 V to 15 V 0.5VDD 0.5VDD
9''
9, 92
* '87
57 &/
DDJ
Test data given in Table 10.

Definitions for test circuit:
DUT = Device Under Test.
CL = load capacitance including jig and probe capacitance.
RT = termination resistance should be equal to the output impedance Zo of the pulse generator.
Fig 5. Test circuit for measuring switching times
Table 10. Test data

Supply voltage Input Load
VDD VI tr, tf CL
5 V to 15 V VSS or VDD 20 ns 50 pF

Nexperia HEF40106B
13. Transfer characteristics

Table 11. Transfer characteristics
VSS = 0 V; see Figure 6 and Figure 7.
Symbol Parameter Conditions VDD Tamb = 40 C to +85 C Tamb = 40 C to +125 C Unit
Min Typ[1] Max Min Max
VT+ positive-going 5V 2.0 3.0 3.5 2.0 3.5 V
threshold voltage 10 V 3.7 5.8 7.0 3.7 7.0 V
15 V 4.9 8.3 11.0 4.9 11.0 V
VT negative-going 5V 1.5 2.2 3.0 1.5 3.0 V
threshold voltage 10 V 3.0 4.5 6.3 3.0 6.3 V
15 V 4.0 6.5 10.1 4.0 10.1 V
VH hysteresis voltage 5V 0.5 0.8 - 0.5 - V
10 V 0.7 1.3 - 0.7 - V
15 V 0.9 1.8 - 0.9 - V
[1] All typical values are at Tamb = 25 C.
92
97
9, 9+
97
9, 92
9+
97 97 DDJ DDJ
Fig 6. Transfer characteristic Fig 7. Waveforms showing definition of VT+ and VT

(between limits at 30 % and 70 %) and VH

Nexperia HEF40106B
DDO DDO

,' ,'
$ $

9,9 9,9
a. VDD = 5 V; Tamb = 25 C b. VDD = 10 V; Tamb = 25 C
DDO

,'
$

9,9
c. VDD = 15 V; Tamb = 25 C
Fig 8. Typical drain current as a function of input

Nexperia HEF40106B
DDO

9,
9

93

91

9''9
Tamb = 25 C.
Fig 9. Typical switching levels as a function of supply voltage
14. Application information

Some examples of applications for the HEF40106B are:
Wave and pulse shapers

Astable multivibrators
Monostable multivibrators
&3
& 5
PQD &
DDO
Fig 10. Astable multivibrator Fig 11. Schmitt trigger driven via a
high-impedance input
If a Schmitt trigger is driven via a high-impedance (R > 1 k), then it is necessary to

V DD V SS
C > ------------------------
incorporate a capacitor C with a value of ------ - ; otherwise oscillation can occur
CP VH
on the edges of a pulse.
Cp is the external parasitic capacitance between inputs and output; the value depends on
the circuit board layout.

Nexperia HEF40106B
15. Package outline
62SODVWLFVPDOORXWOLQHSDFNDJHOHDGVERG\ZLGWKPP 627
' ( $
;
F
\ +( Y 0 $
=

4
$
$
$
$
SLQLQGH[

/S
/
H Z 0 GHWDLO;
ES
PP
VFDOH
',0(16,216LQFKGLPHQVLRQVDUHGHULYHGIURPWKHRULJLQDOPPGLPHQVLRQV
$
81,7 $ $ $ ES F ' ( H +( / /S 4 Y Z \ =
PD[

PP
R
R

LQFKHV

1RWH
3ODVWLFRUPHWDOSURWUXVLRQVRIPPLQFKPD[LPXPSHUVLGHDUHQRWLQFOXGHG
287/,1( 5()(5(1&(6 (8523($1

,668('$7(
9(56,21 ,(& -('(& -(,7$ 352-(&7,21

627 ( 06

Fig 12. Package outline SOT108-1 (SO14)

Nexperia HEF40106B
76623SODVWLFWKLQVKULQNVPDOORXWOLQHSDFNDJHOHDGVERG\ZLGWKPP 627
' ( $
;
F
\ +( Y 0 $
=

4
$ $

$
$
SLQLQGH[

/S
/

GHWDLO;
Z 0
H ES
PP
VFDOH
',0(16,216PPDUHWKHRULJLQDOGLPHQVLRQV
$
81,7 $ $ $ ES F ' ( H +( / /S 4 Y Z \ =
PD[
PP
R

R
1RWHV
3ODVWLFRUPHWDOSURWUXVLRQVRIPPPD[LPXPSHUVLGHDUHQRWLQFOXGHG
3ODVWLFLQWHUOHDGSURWUXVLRQVRIPPPD[LPXPSHUVLGHDUHQRWLQFOXGHG
287/,1( 5()(5(1&(6 (8523($1

,668('$7(
9(56,21 ,(& -('(& -(,7$ 352-(&7,21

627 02

Fig 13. Package outline SOT402-1 (TSSOP14)

Nexperia HEF40106B
16. Abbreviations
Table 12. Abbreviations
Acronym Description
DUT Device Under Test
17. Revision history

Table 13. Revision history
Document ID Release date Data sheet status Change notice Supersedes
HEF40106B v.8 20151210 Product data sheet - HEF40106B v.7
Modifications: Type number HEF40106BP (SOT27-1) removed.
Modifications: Legal pages updated.
Changes in General description and Features and benefits.
HEF40106B v.4 20101115 Product data sheet - HEF40106B_CNV v.3
HEF40106B_CNV v.3 19950101 Product specification - HEF40106B_CNV v.2
HEF40106B_CNV v.2 19950101 Product specification - -

Nexperia HEF40106B
18. Legal information
18.1 Data sheet status

Document status[1][2] Product status[3] Definition
Objective [short] data sheet Development This document contains data from the objective specification for product development.
Preliminary [short] data sheet Qualification This document contains data from the preliminary specification.
Product [short] data sheet Production This document contains the product specification.
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term short data sheet is explained in section Definitions.
[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nexperia.com.
18.2 Definitions Suitability for use Nexperia products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
Draft The document is a draft version only. The content is still under
malfunction of a Nexperia product can reasonably be expected
internal review and subject to formal approval, which may result in
to result in personal injury, death or severe property or environmental
modifications or additions. Nexperia does not give any
damage. Nexperia and its suppliers accept no liability for
representations or warranties as to the accuracy or completeness of
inclusion and/or use of Nexperia products in such equipment or
information included herein and shall have no liability for the consequences of
applications and therefore such inclusion and/or use is at the customers own
use of such information.
risk.
Short data sheet A short data sheet is an extract from a full data sheet
Applications Applications that are described herein for any of these
with the same product type number(s) and title. A short data sheet is intended
products are for illustrative purposes only. Nexperia makes no
for quick reference only and should not be relied upon to contain detailed and
representation or warranty that such applications will be suitable for the
full information. For detailed and full information see the relevant full data
specified use without further testing or modification.
sheet, which is available on request via the local Nexperia sales
office. In case of any inconsistency or conflict with the short data sheet, the Customers are responsible for the design and operation of their applications
full data sheet shall prevail. and products using Nexperia products, and Nexperia
accepts no liability for any assistance with applications or customer product
Product specification The information and data provided in a Product design. It is customers sole responsibility to determine whether the Nexperia
data sheet shall define the specification of the product as agreed between product is suitable and fit for the customers applications and
Nexperia and its customer, unless Nexperia and products planned, as well as for the planned application and use of
customer have explicitly agreed otherwise in writing. In no event however, customers third party customer(s). Customers should provide appropriate
shall an agreement be valid in which the Nexperia product is design and operating safeguards to minimize the risks associated with their
deemed to offer functions and qualities beyond those described in the applications and products.
Product data sheet.
Nexperia does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
18.3 Disclaimers customers applications or products, or the application or use by customers
third party customer(s). Customer is responsible for doing all necessary
testing for the customers applications and products using Nexperia
Limited warranty and liability Information in this document is believed to
products in order to avoid a default of the applications and
be accurate and reliable. However, Nexperia does not give any
the products or of the application or use by customers third party
representations or warranties, expressed or implied, as to the accuracy or
customer(s). Nexperia does not accept any liability in this respect.
completeness of such information and shall have no liability for the
consequences of use of such information. Nexperia takes no Limiting values Stress above one or more limiting values (as defined in
responsibility for the content in this document if provided by an information the Absolute Maximum Ratings System of IEC 60134) will cause permanent
source outside of Nexperia. damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
In no event shall Nexperia be liable for any indirect, incidental,
the Recommended operating conditions section (if present) or the
punitive, special or consequential damages (including - without limitation - lost
Characteristics sections of this document is not warranted. Constant or
profits, lost savings, business interruption, costs related to the removal or
repeated exposure to limiting values will permanently and irreversibly affect
replacement of any products or rework charges) whether or not such
the quality and reliability of the device.
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory. Terms and conditions of commercial sale Nexperia
Notwithstanding any damages that customer might incur for any reason products are sold subject to the general terms and conditions of commercial
whatsoever, Nexperias aggregate and cumulative liability towards sale, as published at http://www.nexperia.com/profile/terms, unless otherwise
customer for the products described herein shall be limited in accordance agreed in a valid written individual agreement. In case an individual
with the Terms and conditions of commercial sale of Nexperia. agreement is concluded only the terms and conditions of the respective
agreement shall apply. Nexperia hereby expressly objects to
Right to make changes Nexperia reserves the right to make applying the customers general terms and conditions with regard to the
changes to information published in this document, including without purchase of Nexperia products by customer.
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior No offer to sell or license Nothing in this document may be interpreted or
to the publication hereof. construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.

Nexperia HEF40106B
Export control This document as well as the item(s) described herein Nexperias specifications such use shall be solely at customers
may be subject to export control regulations. Export might require a prior own risk, and (c) customer fully indemnifies Nexperia for any
authorization from competent authorities. liability, damages or failed product claims resulting from customer design and
use of the product for automotive applications beyond Nexperias
Non-automotive qualified products Unless this data sheet expressly
standard warranty and Nexperias product specifications.
states that this specific Nexperia product is automotive qualified,
the product is not suitable for automotive use. It is neither qualified nor tested Translations A non-English (translated) version of a document is for
in accordance with automotive testing or application requirements. Nexperia reference only. The English version shall prevail in case of any discrepancy
accepts no liability for inclusion and/or use of between the translated and English versions.
non-automotive qualified products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer 18.4 Trademarks
(a) shall use the product without Nexperias warranty of the
Notice: All referenced brands, product names, service names and trademarks
product for such automotive applications, use and specifications, and (b)
are the property of their respective owners.
whenever customer uses the product for automotive applications beyond
19. Contact information

For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com

Nexperia HEF40106B
20. Contents
1 General description . . . . . . . . . . . . . . . . . . . . . . 1
2 Features and benefits . . . . . . . . . . . . . . . . . . . . 1
3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
4 Ordering information . . . . . . . . . . . . . . . . . . . . . 1
5 Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2
6 Pinning information . . . . . . . . . . . . . . . . . . . . . . 2
6.1 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
6.2 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 3
7 Functional description . . . . . . . . . . . . . . . . . . . 3
8 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3
9 Recommended operating conditions. . . . . . . . 4
10 Static characteristics. . . . . . . . . . . . . . . . . . . . . 4
11 Dynamic characteristics . . . . . . . . . . . . . . . . . . 5
12 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
13 Transfer characteristics . . . . . . . . . . . . . . . . . . 7
14 Application information. . . . . . . . . . . . . . . . . . . 9
15 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 10
16 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 12
17 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 12
18 Legal information. . . . . . . . . . . . . . . . . . . . . . . 13
18.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 13
18.2 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
18.3 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
18.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 14
19 Contact information. . . . . . . . . . . . . . . . . . . . . 14
20 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Nexperia B.V. 2017. All rights reserved

For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Date of release: 10 December 2015

Hef40106b PDF

Uploaded by

Copyright:

Available Formats

Hef40106b PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Hef40106b PDF

Uploaded by

Copyright:

Available Formats

HEF40106B

Hex inverting Schmitt trigger

It operates over a recommended VDD power supply range of 3 V to 15 V referenced to VSS

2. Features and benefits

Fig 1. Functional diagram Fig 2. Logic diagram (one inverting buffer)

Fig 3. Pin configuration

Product data sheet Rev. 8 10 December 2015 2 of 15

6.2 Pin description

[1] H = HIGH voltage level; L = LOW voltage level.

Product data sheet Rev. 8 10 December 2015 3 of 15

9. Recommended operating conditions

10. Static characteristics

Product data sheet Rev. 8 10 December 2015 4 of 15

11. Dynamic characteristics

Table 8. Dynamic power dissipation

Product data sheet Rev. 8 10 December 2015 5 of 15

Measurement points are given in Table 9.

Table 9. Measurement points

Test data given in Table 10.

Table 10. Test data

Product data sheet Rev. 8 10 December 2015 6 of 15

13. Transfer characteristics

[1] All typical values are at Tamb = 25 C.

Fig 6. Transfer characteristic Fig 7. Waveforms showing definition of VT+ and VT

Product data sheet Rev. 8 10 December 2015 7 of 15

a. VDD = 5 V; Tamb = 25 C b. VDD = 10 V; Tamb = 25 C

Product data sheet Rev. 8 10 December 2015 8 of 15

14. Application information

Wave and pulse shapers

If a Schmitt trigger is driven via a high-impedance (R > 1 k), then it is necessary to

Product data sheet Rev. 8 10 December 2015 9 of 15

15. Package outline

287/,1( 5()(5(1&(6 (8523($1

Fig 12. Package outline SOT108-1 (SO14)

Product data sheet Rev. 8 10 December 2015 10 of 15

287/,1( 5()(5(1&(6 (8523($1

Fig 13. Package outline SOT402-1 (TSSOP14)

Product data sheet Rev. 8 10 December 2015 11 of 15

17. Revision history

Product data sheet Rev. 8 10 December 2015 12 of 15

18. Legal information

18.1 Data sheet status

Product data sheet Rev. 8 10 December 2015 13 of 15

19. Contact information

Product data sheet Rev. 8 10 December 2015 14 of 15

Nexperia B.V. 2017. All rights reserved

You might also like