HEF4066B

Quad single-pole single-throw analog switch

Rev. 9 — 19 April 2016 Product data sheet

1. General description
The HEF4066B provides four single-pole, single-throw analog switch functions. Each
switch has two input/output terminals (nY and nZ) and an active HIGH enable input (nE).
When nE is LOW, the analog switch is turned off.

The HEF4066B is pin compatible with the HEF4016B but exhibits a much lower ON
resistance. In addition the ON resistance is relatively constant over the full input signal
range.

2. Features and benefits

 Fully static operation
 5 V, 10 V, and 15 V parametric ratings
 Standardized symmetrical output characteristics
 Inputs and outputs are protected against electrostatic effects
 Specified from 40 C to +85 C and 40 C to +125 C
 Complies with JEDEC standard JESD 13-B

3. Applications
 Analog multiplexing and demultiplexing
 Digital multiplexing and demultiplexing
 Signal gating

4. Ordering information
Table 1. Ordering information
Type number Package
Temperature range Name Description Version
HEF4066BT 40 C to +125 C SO14 plastic small outline package; 14 leads; SOT108-1
body width 3.9 mm
Nexperia HEF4066B
Quad single-pole single-throw analog switch

5. Functional diagram

 
< =


( Q<
 
< =
 Q(
(
 
< =
9'' 9''

(

 
< =

( 966 Q=
DDJ DDJ

Fig 1. Functional diagram Fig 2. Logic diagram (one switch)

6. Pinning information

6.1 Pinning

<   9''

=   (

=   (

<  +()%  <

(   =

(   =

966   <

DDJ

Fig 3. Pin configuration

6.2 Pin description

Table 2. Pin description
Symbol Pin Description
1Y, 2Y, 3Y, 4Y 1, 4, 8, 11 independent input or output
1Z, 2Z, 3Z, 4Z 2, 3, 9, 10 independent input or output
1E, 2E, 3E, 4E 13, 5, 6, 12 enable input (active HIGH)
VSS 7 ground (0 V)
VDD 14 supply voltage

HEF4066B All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved

Product data sheet Rev. 9 — 19 April 2016 2 of 15

Nexperia HEF4066B
Quad single-pole single-throw analog switch

7. Functional description
Table 3. Function table[1]
Input nE Switch
H ON
L OFF

[1] H = HIGH voltage level; L = LOW voltage level.

8. Limiting values
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to VSS = 0 V (ground).
Symbol Parameter Conditions Min Max Unit
VDD supply voltage 0.5 +18 V
IIK input clamping current VI < 0.5 V or VI > VDD + 0.5 V - 10 mA
VI input voltage 0.5 VDD + 0.5 V
II/O input/output current [1] - 10 mA
Tstg storage temperature 65 +150 C
Tamb ambient temperature 40 +125 C
Ptot total power dissipation Tamb = 40 C to +125 C
SO14 [2] - 500 mW
P power dissipation per switch - 100 mW

[1] To avoid drawing VDD current out of terminal nZ, when switch current flows into terminals nY, the voltage drop across the bidirectional
switch must not exceed 0.4 V. If the switch current flows into terminal nZ, no VDD current will flow out of terminals nY, in this case there
is no limit for the voltage drop across the switch, but the voltages at nY and nZ may not exceed VDD or VSS.
[2] For SO14 packages: above Tamb = 70 C, Ptot derates linearly with 8 mW/K.

9. Recommended operating conditions

Table 5. Recommended operating conditions
Symbol Parameter Conditions Min Typ Max Unit
VDD supply voltage 3 - 15 V
VI input voltage 0 - VDD V
Tamb ambient temperature in free air 40 - +125 C
t/V input transition rise and fall VDD = 5 V - - 3.75 s/V
rate VDD = 10 V - - 0.5 s/V
VDD = 15 V - - 0.08 s/V

HEF4066B All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved

Product data sheet Rev. 9 — 19 April 2016 3 of 15

Nexperia HEF4066B
Quad single-pole single-throw analog switch

10. Static characteristics

Table 6. Static characteristics
VSS = 0 V; VI = VSS or VDD unless otherwise specified.
Symbol Parameter Conditions VDD Tamb = 40 C Tamb = 25 C Tamb = 85 C Tamb = 125 C Unit
Min Max Min Max Min Max Min Max
VIH HIGH-level IO < 1 A 5V 3.5 - 3.5 - 3.5 - 3.5 - V
input voltage 10 V 7.0 - 7.0 - 7.0 - 7.0 - V
15 V 11.0 - 11.0 - 11.0 - 11.0 - V
VIL LOW-level IO < 1 A 5V - 1.5 - 1.5 - 1.5 - 1.5 V
input voltage 10 V - 3.0 - 3.0 - 3.0 - 3.0 V
15 V - 4.0 - 4.0 - 4.0 - 4.0 V
II input leakage 15 V - 0.1 - 0.1 - 1.0 - 1.0 A
current
IS(OFF) OFF-state per channel; 15 V - - - 200 - - - - nA
leakage see Figure 4
current
IDD supply current all valid input 5V - 1.0 - 1.0 - 7.5 - 7.5 A
combinations 10 V - 2.0 - 2.0 - 15.0 - 15.0 A
15 V - 4.0 - 4.0 - 30.0 - 30.0 A
CI input nE input - - - - 7.5 - - - - pF
capacitance

10.1 Test circuit

9''

Q(
9,/
Q= Q<
,6

9, 966 92

DDN

Fig 4. Test circuit for measuring OFF-state leakage current

HEF4066B All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved

Product data sheet Rev. 9 — 19 April 2016 4 of 15

Nexperia HEF4066B
Quad single-pole single-throw analog switch

10.2 ON resistance
Table 7. ON resistance
Tamb = 25 C; ISW = 200 A; VSS = 0 V.
Symbol Parameter Conditions VDD Typ Max Unit
RON(peak) ON resistance (peak) VI = 0 V to VDD; see Figure 5 and 5V 350 2500 
Figure 6 10 V 80 245 
15 V 60 175 
RON(rail) ON resistance (rail) VI = 0 V; see Figure 5 and Figure 6 5V 115 340 
10 V 50 160 
15 V 40 115 
VI = VDD; see Figure 5 and Figure 6 5V 120 365 
10 V 65 200 
15 V 50 155 
RON ON resistance mismatch VI = 0 V to VDD; see Figure 5 5V 25 - 
between channels 10 V 10 - 
15 V 5 - 

10.2.1 ON resistance waveform and test circuit

DDN


521
ȍ



96:

9''

Q(
9,+

Q< Q= 

9, 966 ,6: 

   
DDN 9,9

RON = VSW / ISW. ISW = 200 A.

(1) VDD = 5 V
(2) VDD = 10 V
(3) VDD = 15 V
Fig 5. Test circuit for measuring RON Fig 6. Typical RON as a function of input voltage

HEF4066B All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved

Product data sheet Rev. 9 — 19 April 2016 5 of 15

Nexperia HEF4066B
Quad single-pole single-throw analog switch

11. Dynamic characteristics

Table 8. Dynamic characteristics
Tamb = 25 C; VSS = 0 V; for test circuit see Figure 9.
Symbol Parameter Conditions VDD Typ Max Unit
tPHL HIGH to LOW propagation delay nY, nZ to nZ, nY; see Figure 7 5V 10 20 ns
10 V 5 10 ns
15 V 5 10 ns
nY, nZ to nZ, nY; see Figure 7 5V 10 20 ns
10 V 5 10 ns
15 V 5 10 ns
tPHZ HIGH to OFF-state nE to nY, nZ; see Figure 8 5V 80 160 ns
propagation delay 10 V 65 130 ns
15 V 60 120 ns
tPZH OFF-state to HIGH nE to nY, nZ; see Figure 8 5V 40 80 ns
propagation delay 10 V 20 40 ns
15 V 15 30 ns
tPLZ LOW to OFF-state nE to nY, nZ; see Figure 8 5V 80 160 ns
propagation delay 10 V 70 140 ns
15 V 70 140 ns
tPZL OFF-state to LOW nE to nY, nZ; see Figure 8 5V 45 90 ns
propagation delay 10 V 20 40 ns
15 V 15 30 ns

Table 9. Dynamic power dissipation PD

PD can be calculated from the formulas shown; VSS = 0 V; tr = tf  20 ns; Tamb = 25 C.
Symbol Parameter VDD Typical formula for PD (W) where:
PD dynamic power 5V PD = 2500  fi + (fo  CL)  VDD 2 fi = input frequency in MHz;
dissipation 10 V PD = 11500  fi + (fo  CL)  VDD2 fo = output frequency in MHz;
15 V PD = 29000  fi + (fo  CL)  VDD2 CL = output load capacitance in pF;
VDD = supply voltage in V;
(CL  fo) = sum of the outputs.

HEF4066B All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved

Product data sheet Rev. 9 — 19 April 2016 6 of 15

Nexperia HEF4066B
Quad single-pole single-throw analog switch

11.1 Waveforms and test circuit

9,

LQSXWQ<RUQ= 90 90

9
W3/+ W3+/

92

RXWSXWQ=RUQ< 90 90

9
DDN

Measurement points are given in Table 10.

Fig 7. nY or nZ to nZ or nY propagation delays

9,

LQSXWQ( 90 90

9
W3/= W3=/
9''

RXWSXWQ<RUQ=

9
W3+= W3=+
9''

RXWSXWQ<RUQ=

9
VZLWFK21 VZLWFK2)) VZLWFK21
DDN

Measurement points are given in Table 10.

Fig 8. Enable and disable times

Table 10. Measurement points

Supply voltage Input Output
VDD VM VM
5 V to 15 V 0.5VDD 0.5VDD

HEF4066B All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved

Product data sheet Rev. 9 — 19 April 2016 7 of 15

Nexperia HEF4066B
Quad single-pole single-throw analog switch

W:
9,

QHJDWLYH
SXOVH 90 90

9
WI WU

WU WI
9,

SRVLWLYH
SXOVH 90 90

9
W:

9'' 9, 9''

9, 92 5/ 6
* '87 RSHQ

57 &/

966
DDN

Test data is given in Table 11.

Definitions:
DUT = Device Under Test.
RT = Termination resistance should be equal to output impedance Zo of the pulse generator.
CL = Load capacitance including test jig and probe.
RL = Load resistance.
Fig 9. Test circuit for measuring switching times

Table 11. Test data

Supply voltage Input Load S1 position
VDD VI tr, tf CL RL tPHL, tPLH tPZH, tPHZ tPZL, tPLZ
5 V to 15 V 0 V or VDD 20 ns 50 pF 10 k VSS VSS VDD

11.2 Additional dynamic parameters

Table 12. Additional dynamic characteristics
VSS = 0 V; Tamb = 25 C.
Symbol Parameter Conditions VDD Typ Max Unit
THD total harmonic distortion see Figure 10; RL = 10 k; CL = 15 pF; 5 V [1] 0.25 - %
channel ON; VI = 0.5VDD (p-p); 10 V [1] 0.04 - %
fi = 1 kHz
15 V [1] 0.04 - %
Vct crosstalk voltage nE input to switch; see Figure 11; 10 V 50 - mV
RL = 10 k; CL = 15 pF;
nE = VDD (square-wave)

HEF4066B All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved

Product data sheet Rev. 9 — 19 April 2016 8 of 15

Nexperia HEF4066B
Quad single-pole single-throw analog switch

Table 12. Additional dynamic characteristics …continued

VSS = 0 V; Tamb = 25 C.
Symbol Parameter Conditions VDD Typ Max Unit
Xtalk crosstalk between switches; see Figure 12; 10 V [1] 50 - dB
fi = 1 MHz; RL = 1 k;
VI = 0.5VDD (p-p)
iso isolation (OFF-state) see Figure 13; fi = 1 MHz; RL = 1 k; 10 V [1] 50 - dB
CL = 5 pF; VI = 0.5VDD (p-p)
f(3dB) 3 dB frequency response see Figure 14; RL = 1 k; CL = 5 pF; 10 V [1] 90 - MHz
VI = 0.5VDD (p-p)

[1] fi is biased at 0.5VDD.

11.2.1 Test circuits

9''

Q(
9,+
Q< Q=

966
IL 5/ &/ '

DDN

Fig 10. Test circuit for measuring total harmonic distortion

9'' 9'' 9''

5/
Q( 5/

Q< Q=

* 966
&/ 9 92

DDN

a. Test circuit

ORJLF RII RQ RII

LQSXWQ(

92 9FW

DDN

b. Input and output pulse definitions

Fig 11. Test circuit for measuring crosstalk voltage between digital input and switch

HEF4066B All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved

Product data sheet Rev. 9 — 19 April 2016 9 of 15

Nexperia HEF4066B
Quad single-pole single-throw analog switch

9''

(
9,+

<RU= =RU<

&+$11(/
9, 21 5/ 9 92

Q(
9,/

Q<RUQ= Q=RUQ<

&+$11(/
5/ 2)) 5/ 9 92

966

DDN

20 log10 (VO2 / VO1) or 20 log10 (VO1 / VO2).

Fig 12. Test circuit for measuring crosstalk between switches

9'' 9''

Q( Q(
9,/ 9,+
Q< Q= Q< Q=

966 966
IL 5/ &/ G% IL 5/ &/ G%

DDN DDN

Adjust fi voltage to obtain 0 dBm level at input. Adjust fi voltage to obtain 0 dBm level at output. Increase
fi frequency until dB meter reads 3 dB.
Fig 13. Test circuit for measuring isolation (OFF-state) Fig 14. Test circuit for measuring frequency response

HEF4066B All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved

Product data sheet Rev. 9 — 19 April 2016 10 of 15

Nexperia HEF4066B
Quad single-pole single-throw analog switch

12. Package outline

62SODVWLFVPDOORXWOLQHSDFNDJHOHDGVERG\ZLGWKPP 627

' ( $
;

F

\ +( Y 0 $

=

 

4
$
$
 $
$
SLQLQGH[
ș
/S

  /

H Z 0 GHWDLO;
ES

  PP
VFDOH

',0(16,216LQFKGLPHQVLRQVDUHGHULYHGIURPWKHRULJLQDOPPGLPHQVLRQV
$
81,7 $ $ $ ES F ' ( H +( / /S 4 Y Z \ = ș
PD[
          
PP       
          R
R
          
LQFKHV       
         

1RWH
3ODVWLFRUPHWDOSURWUXVLRQVRIPPLQFKPD[LPXPSHUVLGHDUHQRWLQFOXGHG

287/,1( 5()(5(1&(6 (8523($1

,668('$7(
9(56,21 ,(& -('(& -(,7$ 352-(&7,21


627 ( 06


Fig 15. Package outline SOT108-1 (SO14)

HEF4066B All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved

Product data sheet Rev. 9 — 19 April 2016 11 of 15

Nexperia HEF4066B
Quad single-pole single-throw analog switch

13. Abbreviations
Table 13. Abbreviations
Acronym Description
DUT Device Under Test

14. Revision history

Table 14. Revision history
Document ID Release date Data sheet status Change notice Supersedes
HEF4066B v.10 20160419 Product data sheet - HEF4066B v.9
Modifications: • Table 4: Condition for total power dissipation changed (errata)
• Table 4: Maximum ambient temperature changed (errata)
HEF4066B v.9 20151216 Product data sheet - HEF4066B v.8
Modifications: • Type number HEF4066BP (SOT27-1) removed.
HEF4066B v.8 20140911 Product data sheet - HEF4066B v.7
Modifications: • Figure 11: Test circuit modified
HEF4066B v.7 20111116 Product data sheet - HEF4066B v.6
Modifications: • Legal pages updated.
• Changes in “General description”, “Features and benefits” and “Applications”.
HEF4066B v.6 20100325 Product data sheet - HEF4066B v.5
HEF4066B v.5 20100225 Product data sheet - HEF4066B v.4
HEF4066B v.4 20091013 Product data sheet - HEF4066B_CNV v.3
HEF4066B_CNV v.3 19950101 Product specification - HEF4066B_CNV v.2
HEF4066B_CNV v.2 19950101 Product specification - -

HEF4066B All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved

Product data sheet Rev. 9 — 19 April 2016 12 of 15

Nexperia HEF4066B
Quad single-pole single-throw analog switch

15. Legal information

15.1 Data sheet status

Document status[1][2] Product status[3] Definition
Objective [short] data sheet Development This document contains data from the objective specification for product development.
Preliminary [short] data sheet Qualification This document contains data from the preliminary specification.
Product [short] data sheet Production This document contains the product specification.

[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nexperia.com.

15.2 Definitions Suitability for use — Nexperia products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
Draft — The document is a draft version only. The content is still under
malfunction of a Nexperia product can reasonably be expected
internal review and subject to formal approval, which may result in
to result in personal injury, death or severe property or environmental
modifications or additions. Nexperia does not give any
damage. Nexperia and its suppliers accept no liability for
representations or warranties as to the accuracy or completeness of
inclusion and/or use of Nexperia products in such equipment or
information included herein and shall have no liability for the consequences of
applications and therefore such inclusion and/or use is at the customer’s own
use of such information.
risk.
Short data sheet — A short data sheet is an extract from a full data sheet
Applications — Applications that are described herein for any of these
with the same product type number(s) and title. A short data sheet is intended
products are for illustrative purposes only. Nexperia makes no
for quick reference only and should not be relied upon to contain detailed and
representation or warranty that such applications will be suitable for the
full information. For detailed and full information see the relevant full data
specified use without further testing or modification.
sheet, which is available on request via the local Nexperia sales
office. In case of any inconsistency or conflict with the short data sheet, the Customers are responsible for the design and operation of their applications
full data sheet shall prevail. and products using Nexperia products, and Nexperia
accepts no liability for any assistance with applications or customer product
Product specification — The information and data provided in a Product design. It is customer’s sole responsibility to determine whether the Nexperia
data sheet shall define the specification of the product as agreed between product is suitable and fit for the customer’s applications and
Nexperia and its customer, unless Nexperia and products planned, as well as for the planned application and use of
customer have explicitly agreed otherwise in writing. In no event however, customer’s third party customer(s). Customers should provide appropriate
shall an agreement be valid in which the Nexperia product is design and operating safeguards to minimize the risks associated with their
deemed to offer functions and qualities beyond those described in the applications and products.
Product data sheet.
Nexperia does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
15.3 Disclaimers customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using Nexperia
Limited warranty and liability — Information in this document is believed to
products in order to avoid a default of the applications and
be accurate and reliable. However, Nexperia does not give any
the products or of the application or use by customer’s third party
representations or warranties, expressed or implied, as to the accuracy or
customer(s). Nexperia does not accept any liability in this respect.
completeness of such information and shall have no liability for the
consequences of use of such information. Nexperia takes no Limiting values — Stress above one or more limiting values (as defined in
responsibility for the content in this document if provided by an information the Absolute Maximum Ratings System of IEC 60134) will cause permanent
source outside of Nexperia. damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
In no event shall Nexperia be liable for any indirect, incidental,
the Recommended operating conditions section (if present) or the
punitive, special or consequential damages (including - without limitation - lost
Characteristics sections of this document is not warranted. Constant or
profits, lost savings, business interruption, costs related to the removal or
repeated exposure to limiting values will permanently and irreversibly affect
replacement of any products or rework charges) whether or not such
the quality and reliability of the device.
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory. Terms and conditions of commercial sale — Nexperia
Notwithstanding any damages that customer might incur for any reason products are sold subject to the general terms and conditions of commercial
whatsoever, Nexperia’s aggregate and cumulative liability towards sale, as published at http://www.nexperia.com/profile/terms, unless otherwise
customer for the products described herein shall be limited in accordance agreed in a valid written individual agreement. In case an individual
with the Terms and conditions of commercial sale of Nexperia. agreement is concluded only the terms and conditions of the respective
agreement shall apply. Nexperia hereby expressly objects to
Right to make changes — Nexperia reserves the right to make applying the customer’s general terms and conditions with regard to the
changes to information published in this document, including without purchase of Nexperia products by customer.
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior No offer to sell or license — Nothing in this document may be interpreted or
to the publication hereof. construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.

HEF4066B All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved

Product data sheet Rev. 9 — 19 April 2016 13 of 15

Nexperia HEF4066B
Quad single-pole single-throw analog switch

Export control — This document as well as the item(s) described herein Nexperia’s specifications such use shall be solely at customer’s
may be subject to export control regulations. Export might require a prior own risk, and (c) customer fully indemnifies Nexperia for any
authorization from competent authorities. liability, damages or failed product claims resulting from customer design and
use of the product for automotive applications beyond Nexperia’s
Non-automotive qualified products — Unless this data sheet expressly
standard warranty and Nexperia’s product specifications.
states that this specific Nexperia product is automotive qualified,
the product is not suitable for automotive use. It is neither qualified nor tested Translations — A non-English (translated) version of a document is for
in accordance with automotive testing or application requirements. Nexperia reference only. The English version shall prevail in case of any discrepancy
accepts no liability for inclusion and/or use of between the translated and English versions.
non-automotive qualified products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer 15.4 Trademarks
(a) shall use the product without Nexperia’s warranty of the
Notice: All referenced brands, product names, service names and trademarks
product for such automotive applications, use and specifications, and (b)
are the property of their respective owners.
whenever customer uses the product for automotive applications beyond

16. Contact information

For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com

HEF4066B All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved

Product data sheet Rev. 9 — 19 April 2016 14 of 15

Nexperia HEF4066B
Quad single-pole single-throw analog switch

17. Contents
1 General description . . . . . . . . . . . . . . . . . . . . . . 1
2 Features and benefits . . . . . . . . . . . . . . . . . . . . 1
3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
4 Ordering information . . . . . . . . . . . . . . . . . . . . . 1
5 Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2
6 Pinning information . . . . . . . . . . . . . . . . . . . . . . 2
6.1 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
6.2 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 2
7 Functional description . . . . . . . . . . . . . . . . . . . 3
8 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3
9 Recommended operating conditions. . . . . . . . 3
10 Static characteristics. . . . . . . . . . . . . . . . . . . . . 4
10.1 Test circuit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
10.2 ON resistance . . . . . . . . . . . . . . . . . . . . . . . . . . 5
10.2.1 ON resistance waveform and test circuit . . . . . 5
11 Dynamic characteristics . . . . . . . . . . . . . . . . . . 6
11.1 Waveforms and test circuit . . . . . . . . . . . . . . . . 7
11.2 Additional dynamic parameters . . . . . . . . . . . . 8
11.2.1 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
12 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 11
13 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 12
14 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 12
15 Legal information. . . . . . . . . . . . . . . . . . . . . . . 13
15.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 13
15.2 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
15.3 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
15.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 14
16 Contact information. . . . . . . . . . . . . . . . . . . . . 14
17 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

© Nexperia B.V. 2017. All rights reserved

For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Date of release: 19 April 2016