RANGER 700

Technical Specification
05271-1

Rock pilot
2005-04-18

APPLICATION

Ranger 700 is a hydraulic, self-propelled, self- Ranger 700 has an ergonomic cabin to increase op-
contained, crawler based surface drilling rig erator's safety and visibility. The cabin is certified for
equipped with a cabin (F.O.P.S. and R.O.P.S.) and R.O.P.S. (ISO-3471 Roll-Over Protection Structure)
rod handling system. It drills vertical, inclined or hori- and F.O.P.S. (ISO-3449 Falling Object Protection
zontal holes with a diameter of 64 - 115 mm (2 " - Structure). Windows are laminated for added safety.
4 ") utilizing 38, 45 or 51 mm (1 ", 1 " or 2") ex- The noise level in the cabin is less than 80 dB(A). To
tension rods. keep dust at a minimum, the cabin is fitted with effi-
Ranger 700 is equipped with HL 710, hydraulic top cient filters for incoming fresh air. Adjustable seat,
hammer rock drill. With high rotation torque, suffi- good visibility, adequate lighting and an optimum
cient flushing and sophisticated ergonomic drilling working temperature are among the many features
control system the rig is well suited also in very frac- ensuring a good operating environment. Drilling func-
tured rock conditions. The rock drill and articulated tions are proportionally controlled by one hydraulic
boom are mounted on the turnable superstructure joystick. Several routine functions e.g. antijamming
giving a drilling coverage of 17,6 m2 (optionally 26,4 are executed automatically. There are fewer levers
m2). to make it easy to use. Driving, rear jack and winch
control can be done outside the cabin from the op-
The powerpack of Ranger 700 consists of a Caterpil-
tional remote control box.
lar diesel engine and a gearbox, which divides the
power for hydraulic pumps and flushing air compres- Typical applications for Ranger 700 are road cutting,
sor. The powerpack is mounted crosswise at the rear pipeline drilling and foundation drilling, as well as
end of the superstructure to keep counterweight on production drilling in medium size quarries. There-
the opposite side of the boom and feed regardless of fore Ranger 700 is most often used by construction
the drilling direction. contractors, mines and quarries, and also included in
the equipment fleet of rental houses as well.

1/3
Technical Specification
05271-1 RANGER 700
2005-04-18
Rock Pilot

DRILLING DIMENSIONS

90

30

Optional 90

1m
1m

TRANSPORT DIMENSIONS

3600

7200

7300
3200

10700 2590

2/3
Technical Specification
05271-1 RANGER 700
2005-04-18
Rock Pilot
STANDARD COMPONENTS TRANSPORT DIMENSIONS
1. Rock drill HL 710, hydraulic Weight (without options) 14 800 kg
2. Chain feed CF 145H Width 2.5 m
3. Rod handler RH 714 incl. 1 set of jaws Height 3.6 m / 3.2 m
4. Boom DB 800H, articulated Total length 7.2 m / 10.7 m
5. Carrier Track mounted, turnable
superstructure
THE JAWS FOR DRILL STEELS
6. Powerpack Diesel driven, hydraulic
pumps and on-board com- Drill steel Drill steel Recommended
pressor type diameter hole diameter
7. Hydraulic system Load sensing and open Extension 38 mm 64 - 70 mm
1.
center rods 1 " 2 " - 2 "
8. Control system THC 700 Rock Pilot 38 mm 64 - 70 mm
2. MF-rod
9. Operator's cabin F.O.P.S. and R.O.P.S. 1 " 2 " - 2 "
10. Dust collection DC 800 H, hydraulic Extension 45 mm 76 - 89 mm
system 3.
rods 1 " 3" - 3 "
11. Working lights 9 pcs 45 mm
4. MF-rod 76 - 89 mm
12. Gauge set For accumulator pressure
1 " 3" - 3 "
checking
13. Reversing alarm 5. MF-rod 51 mm 89 - 115 mm
Service and spare 2" 3 " - 4 "
14. Manuals
parts manuals:
2 x paper copy Note
- not with 10' MF-rods
2 x CD-ROM (Toolman)
- with hose reel only 10' or 12' rods
15. EU-safety devices - 51 mm (2") / 14 steels only MF-type
- if several jaws selected please specify jaws assembled

SELECTION OF OPTIONS
1. Turnable superstructure 180 22. Horizontal drilling kit
2. Air conditioning 23. Hose reel (not with 14' rods)
3. Rod greasing system
4. P&Q electric vertical angle indicator ( 6 deg.) 24. Movable drill steel support

5. Electric angle indicator TIM 2302 with aiming 25. Radio with CD player
unit 26. Central lubrication system
6. Measuring system TIM 2303 with aiming unit 27. Kit for alternative steels
7. Laser based measuring system TIM 2305 28. Water injection system with tank
8. Power extractor 29. Water injection system w/o tank
9. Electric filling pump for refuelling 30. Zero Dust system
10. Remote control box; for rear ground support, 31. Biogradeable hydraulic oil, Shell naturelle HFE
driving and oscillation 46 or HFE 68 (synthetic ester)
11. Remote control box + hydraulic winch with cable 32. Extra manuals
tightness automatics (replaces previous option)
12. Hydraulic rear ground support 33. First service kit for Ranger 700

13. Three-bar grouser plates 34. Special tools for HL 710, field kit
ID 150 734 88
14. Guides for grousers 35. Special tools for HL 710, complete
15. Fuel operated heater for cabin, hydr. oil and en- ID 150 730 78
gine 36. Antifreeze for air lines
16. Flushing control automatics 37. Vacuum cleaner for cabin
17. Shut down of suction for water holes
18. Sanrock Mini H hydraulic bit grinder
19. Readyness for Power extractor www.tamrock.com
SANDVIK TAMROCK reserves the right to change this specification without further notice
20. Towing hook
21. Primary separator PE 50
SANDVIK TAMROCK OY, P.O.Box 100, FIN-33311 Tampere, FINLAND 3/3
Tel.int. +358 205 44 121, Telefax int. +358 205 44 120