Consortium: Critical State Soil Mechanics

CRISP
The
Consortium
Critical State Soil Mechanics
Original notes by Professor Mike Gunn, South Bank University, London, UK

Produced by the CRISP Consortium Ltd
SOIL MODELLING
model assumed relationship between stress and strain for a soil.
Underlying conventional design calculations in geotechnical engineering are different soil models based on
concepts of elasticity and plasticity.
Underlying most methods of calculating ground movements is the assumption of a linear elastic soil model.
E = Youngs modulus
= Poissons ratio
Drained
E,
Undrained
Eu, u
Underlying most stability calculations is a soil model which assumes rigid, perfectly plastic behaviour.
Strength parameters:
Drained
c,
Undrained
cu
2
CRITICAL STATE SOIL MECHANICS
CSSM provides soil models which include:
elastic strains and plastic yielding before failure
dilatancy (volumetric contraction or expansion on shearing)
existence of critical states
provides soil models which can be used as the basis of numerical predictions (using finite elements)
provides the basis for reviewing data from soil tests and selecting strength and stiffness parameters
for design
CRITICAL STATE PARAMETERS

3 parameters are used to describe the (changing) state of a soil sample in a triaxial test.
These are :
Effective mean stress,
Deviatoric stress
Specific volume
p, q, V
Total stresses
a, r
Effective stresses
a = a - u
r = r u
a + 2 r ' a + 2 r
p' =
3 = u
3
= p-u
q = a - r = a - r
V - the specific volume = 1 + e
3
Relationship Between Specific Volume and Other Measures of Soil Density
Ratio of volumes Ratio of weights

Volumes Weights
Water Vw e Vww w
Solid Vs 1 VsGsw 1
e is void ratio
w is moisture content
w is unit weight of water
Gs is specific gravity of solid phase
V = 1 + e = specific volume = volume containing unit volume of solid material.
Now Vw
e =
Vs
and w = Vw w e
=
Vs Gs w Gs
So e = Gs. w
and V = 1 + e = 1 + Gs w
bulk unit weight of soil,
Vw w + Vs Gs w e
= =
Vw + Vs Gs
=
(e + Gs ) w
e + 1
(often called bulk density, although units are force / volume, not mass / volume.)
4
Observed Volume - Pressure Relations
(isotropic
compression)
ZERO
V = N - ln p isotropic NCL
V = V - ln p swelling and recompression
THE CRITICAL STATE LINE (CSL)

If a soil is continually sheared then it will eventually reach a critical state in which further shear strains can
occur with no changes in effective stresses or volume.
When a soil is at the critical state:
q = Mp
V = - lnp
M and are constants for a particular soil.
5
Conventionally the CSL is shown as a pair of
lines (really it is just one line).
Summary
, , , , are soil constants
p, q, V (and V) vary during a test.
Prediction of Final States of Triaxial Tests using Critical State Theory

(a) establish starting point in (p, q) and (p, v) diagrams
(b) establish test path in one of these diagrams:
(p, q) for drained test

(p, v) for undrained test
(c) calculate intersection point of test path and critical state line
failure condition
6
(a) STARTING POINTS
An over-consolidated sample is
prepared by drained isotropic
compression to point A and then
drained unloading to point B.
Vc = N - ln pc (1)
V = Vc + ln pc (2)
V = Vo + ln po (3)
Eliminate V, Vc from (1), (2), (3):
Vo = N - ln pc + ln pc '

po '
(b) TEST PATHS

The total stress path is always controlled by the way in which the soil sample is loaded.
Initial State During Test
p = po p = po + A + 2B
3
q = 0 q = A-B
A and B have differing relative magnitudes according to type of test.
7
TEST PATHS (contd.)
Compression Tests
TEST PATH IN A DRAINED TEST
Extension Tests
8
The pore pressure is zero (i.e. atmospheric pressure) or held at a constant back pressure, say uo.
So the effective stress path (ESP) is parallel to the total stress path (TSP), or coincident with (when uo = 0).
TEST PATH IN AN UNDRAINED TEST

In an undrained test there is no change in volume, so the test path is horizontal in the (p, V) diagram.
WORKED EXAMPLE
Two identical samples of clay are isotropically normally compressed to an all round effective pressure of 100
kPa and are then allowed to swell back to an effective isotropic pressure of 50 kPa.
The first sample is then subjected to a standard drained compression test. What is the deviator stress at
failure and what is the volumetric strain experienced by the sample at failure?
The second sample is subjected to a standard undrained compression test.
What are the deviator stress and pore pressure at failure, if there is initially a back pressure of 50 kPa?
9
Assume that the soil has the following critical state properties:
= 0.95, = 0.093, = 0.035, = 2.06 and = 2.118
(a) Sample preparation
VA = N - ln 100 (1)
V = VA + ln 700 (2)
V = VB + ln 50 (3)
VB = 2.118 -0.093 ln 100 + ln 2

(N) () (0.035)
(b) Drained test
Drained effective stress path (ESP)
is q = - 150 + 3p (4)
CSL q = 0.95 p (5)
At end of test (point F):
150
(4) - (5) pF ' = = 73.2
2.05
q F = 0.95 x 73.2 = 69.5 kPa (deviator stress)
VF = - ln 73.2
= 2.06 - 0.93 ln 73.2
= 1.661
10
Vol strain = 1.714 1661
= 3.1%
1.714
(c) Undrained test

VB = 1.714 (same as drained) at start.
Undrained
so VF = VB also VF = - ln pf
1.714 = 2.06 - 0.093 ln pF
2.06 - 1.714
ln p F =
0.093
From Britto and Gunn (1987)
11
The critical state line in (a) (p, q) plot and (b) (p, V) plot (isotropic normal compression line is shown dashed
in (b)).
q p'
= 0; = 0; =0

The critical state line in (p, V, q) space is given by the intersection of two planes: q = Mp and a curved
vertical plane V = - ln (p).
12

Consortium: Critical State Soil Mechanics

Uploaded by

Copyright:

Available Formats

Consortium: Critical State Soil Mechanics

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Consortium: Critical State Soil Mechanics

Uploaded by

Copyright:

Available Formats

CRISP

Critical State Soil Mechanics

Original notes by Professor Mike Gunn, South Bank University, London, UK

model assumed relationship between stress and strain for a soil.

elastic strains and plastic yielding before failure

dilatancy (volumetric contraction or expansion on shearing)

existence of critical states

CRITICAL STATE PARAMETERS

V - the specific volume = 1 + e

Ratio of volumes Ratio of weights

V = 1 + e = specific volume = volume containing unit volume of solid material.

bulk unit weight of soil,

V = V - ln p swelling and recompression

THE CRITICAL STATE LINE (CSL)

When a soil is at the critical state:

M and are constants for a particular soil.

, , , , are soil constants

p, q, V (and V) vary during a test.

Prediction of Final States of Triaxial Tests using Critical State Theory

(b) establish test path in one of these diagrams:

(p, q) for drained test

Eliminate V, Vc from (1), (2), (3):

(b) TEST PATHS

Initial State During Test

A and B have differing relative magnitudes according to type of test.

TEST PATH IN A DRAINED TEST

TEST PATH IN AN UNDRAINED TEST

The second sample is subjected to a standard undrained compression test.

= 0.95, = 0.093, = 0.035, = 2.06 and = 2.118

(a) Sample preparation

VB = 2.118 -0.093 ln 100 + ln 2

(b) Drained test

Drained effective stress path (ESP)

At end of test (point F):

q F = 0.95 x 73.2 = 69.5 kPa (deviator stress)

(c) Undrained test

1.714 = 2.06 - 0.093 ln pF

From Britto and Gunn (1987)

You might also like