This document provides instructions for an LCD manual control panel, including:
1. Details on the panel's connections, functions, display content, and button operations.
2. The panel has various display modes, control functions, and settings that can be adjusted via button combinations.
3. Contact information is provided for Changzhou Zhipu Electronics Co., Ltd, the manufacturer of the panel.
This document provides instructions for an LCD manual control panel, including:
1. Details on the panel's connections, functions, display content, and button operations.
2. The panel has various display modes, control functions, and settings that can be adjusted via button combinations.
3. Contact information is provided for Changzhou Zhipu Electronics Co., Ltd, the manufacturer of the panel.
This document provides instructions for an LCD manual control panel, including:
1. Details on the panel's connections, functions, display content, and button operations.
2. The panel has various display modes, control functions, and settings that can be adjusted via button combinations.
3. Contact information is provided for Changzhou Zhipu Electronics Co., Ltd, the manufacturer of the panel.
This document provides instructions for an LCD manual control panel, including:
1. Details on the panel's connections, functions, display content, and button operations.
2. The panel has various display modes, control functions, and settings that can be adjusted via button combinations.
3. Contact information is provided for Changzhou Zhipu Electronics Co., Ltd, the manufacturer of the panel.
Item No861-A Working VoltageDC24V 36VSetting of the meter 48VAccording to customers requires to customized
Mode of connection 1. Red LineD+:Enter of the powers plus 2. Black LineGNDPowers minus 3. Blue LineDSController electric door lock 4. Yellow LineDD+Lighting controls plus(If the controllers software and hardware support the lighting controls line,this yellow line wont conncet) 5. Green LineDAT:Received the communication 6. White LineTXSend the communication 7. Extended FunctionPWM type of voltage assistance gears control Independence circumscribed speed sensor
Function 1Function of Display Speed displayAssistance displayBattery indicatorProblems prompt Mileage Accumulative mileage Cruise constant speed Braking indicatorHeadlight display 2Function of Control and Setting Power switch controlFront light switch control6Km/h inching control Real time cruise controlWheel diameters setting5 mode assistances settingHighest speed settingAutomatic dormancy time setting Backlight brightness settingstartup mode drive mode is setpower sensitivity setting dynamical disk type voltage grade setting controller set current limiting values 3Communication ProtocolUART All The Content On The Display Screen(Opened In One Second)
Average SpeedMax Speed AVG Unit: MPH, KM/H Speed has 4 ways to come true depending on the specific way partial way could compose. 1. Hall signal attaching electric motor 2. Controller send Hall signal of motor to meter 3. slow speed Hall signal as the type run a circle. 4. Controller send signal of slow Hall signal as type run a circle to meter. (single Hall cycle, Unit 1MS ) The meter could calculate true speed according to the data of wheel diameter and the signals data (electric motors Hall need to set up the magnet steels quantities) 6. Malfunction Status Display Area
Motor stoppage throttle stoppage controller stoppage
power brake handle Under Voltage Protector
7Assistance status display area
Assistance status (1-5 gear)Cruise marks
8. Set P01Backlight lamp brightness, level 1 is the most dark, level 3 is the brightest; P02Unit mileage, 0: KM;1: the MILE; P03Level of voltage: 24 v, 36 v, 48 v, 36 v (by default); P04Sleep time: 0, means don't sleep;Other Numbers means for the sleep time, range: 1-60;Units of minutes; P05Assistance gears:0, 3Mode1lever 2V2lever 3V3lever 4V; 1, 5Mode1lever 2V2lever 2.5V3lever 3V 4lever 3.5V5lever 4V; P06Wheel diameter: unit, inch;Accuracy: 0.1; P07Speed measuring magnetic steel number: range: 1-100; P08Speed: the range 0 to 50 km/h;The default 50, 50 said not the speed limit; Notewhen the speed is greater than the set speed, shut off the PWM output;When speed down to less than the set speed, automatically open the PWM output, driving speed to the current + 1 km/h; Numerical based on km as a benchmark here, after the unit set from miles to miles, display the speed of numerical value is automatically converted to the correct miles, but miles under the interface of the menu in the values of speed limit set by the data conversion, MPH speed limit values are not consistent with the actual display, P09Zero start, non-zero start setting, 0:0 start;1: the non-zero start; P10Driving mode setting 0: power drive (decided how much output power by power gear, at this time to turn the invalid). 1: electric (by going to drive, steering gear is invalid at this time). 2: power drive and electrical drive coexist (electric zero start state is invalid). P11Power sensitivity setting range: 1-24; P12Assistance start the intensity setting range: 0-5; P13Power magnetic steel plate type 5 Sherwin grain of magnetic steel three types; P14Controller for the current limit value to set,12A(by default) range: 1 - 20 A;
. Button Introduction: Specific buttons position as bellow:
Buttons Design Introduction
Button operation includes short-time press, long-time press and combination buttons long-time press.
Short-time press used in quickly/frequently operation, such as:
1. During riding, press shortly to change
assistance/speed gear.
2. During riding, press shortly to switch the multifunctional
area to display data. Press single button for long time is mainly to switch the mode/button status. Press combination button (for long time) is mainly used for parameter setting, which could reduce maloperation due to complicated operation. (No combination buttons with short-time press, as they are too difficult to operate due to they are easy to be triggered by mistake).
.set/ release the condition of 6km/h cruisereal time cruise,on/off light
When the e-bike is stops,extended press ,you can get into the 6KM/h cruise mode. When the e-bike is running, extended press
,you can get into the real time cruise mode. If just now you are in cruise mode, the mode will be released.
Shortly press to turn on/off light.
.Turn on/off LCD screen
If current display screen is working, extended press ,the screen
will be off, otherwise, the screen will be on. .Shift to multifunctional display version,
Shortly press , you can shift the value on multifunctional display
version. .parameter setting
Press + and hold, get into the version of parameter
setting, then you can set up parameters bellow,wheel diameter (unit: inch), magnet steel number,LCD brightness, under-voltage point etc.( See Settings: P01 - P14)
Under the set interface,you could shortly press or to
add or subtract the value, after modified the parameters ,it will be shine,after you choose the assumed value, 1. Press shortly to save current value,parameters shine will be stop .
2. Press + ,save setting, if didnt press, it will be
automatically save and exit after 10 seconds to modify parameters
Note according to upgrading of our products, there may be some
differences between product introduction and products you received. The differences would not influent your daily usage.
ADD:No.188 Renmin west road,Niutang Town,Shijia Village,Wujin
