FAN DRY COIL UNIT

H i g h Q u a l i t y T e c h n i q u e

Fan Dry Coil Unit

Features and advantages of the fan dry coil unit

FFU Clean System
Comparison between the fan dry coil unit and existing method
Advantages of the fan dry coil unit system
Standard specification
Standard specification
Model name display method
Outline drawing and dimensions

ACE R & A 140

 ACE Air Conditioning System

Features and advantages of the fan dry coil unit

Air Handling Unit

FFU(Fan Filter Unit) Clean System
Structure
With a standardized unit structure that can be freely installed on the ceiling, the product is currently being applied to
super clean rooms well known worldwide

Features

Hygrostat
Thermo -
Suitable for maintenance of super clean grade.
Modification and expansion according to the change of the manufacturing line is easily done.
Wide area is not required for the air handling machine room and installation time is short.
Layout for super clean grade can be freely done.
Installation and operation cost is relatively low.

Heat Recovery
System
Comparison between the Fan Dry Coil Unit and existing method
Dry Coil + FFU System (existing method) Fan Dry Coil Unit + FFU System

- Example of installation - Example of installation

Handling Unit
Slim Type Air
Direct Expansion Type
Air Handling Unit
All the circulation air from the clean room is processed with Part of the circulation air from the clean room is processed with
sensible heat load at the Dry Coil, and then supplied into the room sensible heat load at the Dry Coil and then mixed with the air that is
through the FFU(Fan Filter Unit) by-passed and supplied into the room through the FFU (Fan Filter Unit).

Ceiling Type Air

Handling Unit
Difference between the inlet and outlet water temperature: Difference between inlet and outlet water temperature:
Approximately 2 Approximately 8
Cost of main body is high due to the size of the coil area Coil area: decreased to 1/4 of previous design
Transportation and installation cost is high due to the size of (number of coil rows is doubled)
the coil area. Cost of the main body is low due to the size of the coil area.
Large installation area is required due to the size of the coil area. Cost of the transportation and installation is low due to the size of
(Effective area of the clean room is reduced) the coil area.
Flat distribution of temperature inside the room is good Large installation area is not required by the coil area
Fan

Flat distribution of indoor temperature : worse than previous

methods (within allowable range)

Advantages of the Fan Dry Coil System

Built-Up Unit

Energy saving effect

Through increasing the coil temperature difference, coil area can be decreased and energy saving effect is high by
selection of optimal coil.
Power of the FFU(Fan Filter Unit) can be reduced by integration of the propeller fan.
Reaction on the chemicals
Fan Dry Coil Unit

Structural materials are the Off Gas alternation that has low generation of organic gas
Constructability
Improved constructability due to equipment in compact size

ACE R & A 153 www.aceind.co.kr

 Fan Dry Coil Unit

Standard specification

Standard specification Model name display method

Model
Category AFD0317H A F D - 0 3 1 7 H
/min 317
Standard air volume Type
/h 19,000
H : Horizontal Type
Standard static pressure mmAq 8
Type Propeller Fan
Process air volume(CMM)
Model AFF-600
Size 600 Fan Dry Coil Unit
Fan

Motor power kW 0.75

ACE R&A Co., Ltd.
Motor power source P x PH x Hz 6P x 3PH x 60Hz
Quantity Set 2 Note
1. For specifications other than the standard products, contact our sales department.
Type Cross Fin 2. Operating condition
Chilled coil inlet air temperature : 24.3 DB, 15.8 WB
Caloric value of cooling kcal/h 47,000 Chilled water inlet water temperature : 6 , chilled water inlet and outlet temperature difference : 8
3. Standard and specification may be modified without prior notice for improvement of the product.
Dimensions(Height(Pass)xLength) 994(26) x 1250
Coil

Face Area 2.486

Plumbing(Inlet) A 25
Plumbing(Outlet) A 25
Quantity Set 2

Outline drawing and dimensions

* patent : No. 0426769

ACE R & A 154 www.aceind.co.kr

 Psychrometric Chart

ACE R & A
155
www.aceind.co.kr
ACE Air Conditioning System
ACE Air Conditioning System

Fan Dry Coil Unit Built-Up Unit Fan Ceiling Type Air Direct Expansion Type Slim Type Air Heat Recovery Thermo - Air Handling Unit
Handling Unit Air Handling Unit Handling Unit System Hygrostat
 Technical Data

SI Unit conversion table

SI unit Metric engineering unit Ft-lb system engineering unit
Pa(N/m2) bar/cm2 kg f / cm2 mmHg dyne/cm 2 atm Ib f/in2(psi) Ib f / ft 2
1 1 x 10-5 1.0197 x 10-5 7.50 x 10-3 10 0.987 x 10-5 1.450 x 10-4 2.089 x 10-2
1 x 105 1 1.0197 750.06 1 x 106 0.9870 14.50 2.089 x 103
Pressure

9.807 x 104 0.9807 1 735.56 9.807 x 105 0.9678 14.22 2.05 x 103
133.32 1.333 x 10-3 1.3596 x 10-3 1 1.3332 x 103 1.3157 x 10-3 1.933 x 10-2 2.784
0.10 1 x 10-6 1.0197 x 10-6 7.50 x 10-4 1 0.987 x 10-6 1.450 x 10-5 2.089 x 10-3
1.01325 x 105 1.01325 1.0332 760.0 1.0133 x 106 1 14.6925 2116
6.895 x 103 6.895 x 10-2 7.031 x 10-2 51.73 6.895 x 104 6.806 x 10-2 1 144.0
47.88 4.788 x 10-4 4.88 x 10-4 0.359 478.80 4.726 x 10-4 0.6944 x 10-2 1

SI unit Metric engineering unit Ft-lb system engineering unit Metric engineering unit Ft-lb system
SI unit

Refrigerating capacity
engineering unit
m/s Km/h m/h ft/s ft/h mile/h W usRT JRT kcal/h Btu/h
Velocity

1 3.6 3.6 x 103 3.281 1.181 x 104 2.237 1 0.2843 x 10-3 0.2590 x 10-3 0.8598 3.412
0.278 1 1 x 103 0.9114 3.281 x 103 0.6214 3.517 x 103 1 0.9108 3024 1.20 x 104
0.278 x 10-3 1 x 10-3 1 9.114 x 10-4 3.281 6.214 x 10-4 3.862 x 103 1.098 1 3320 1.317 x 104
0.3048 1.097 1.097 x 103 1 3.6 x 103 0.6818 1.163 3.307 x 10-4 3.012 x 10-4 1 3.968
8.47 x 10-5 3.048 x 10-4 0.3048 2.780 x 10-4 1 1.894 x 10-4 2.931 0.833 x 10-4 0.759 x 10-4 0.2520 1
0.4470 1.609 1.609 x 103 1.467 5.28 x 103 1 usRT = American refrigeration performance ton, JRT = Japanese refrigeration performance ton
Ft-lb system
SI unit Metric engineering unit
(caloric value energy)

Ft-lb system engineering unit

SI unit Metric engineering unit engineering unit
Heat transfer rate

J Kgf m kcal PS h W h Btu

W/m k KJ/m h k Kcal/m h Cal/cm s Btu/ft h Btu/in h
1 3.60 0.8598 2.388 x 10-3 0.5778 4.815 x 10-2 1 0.102 2.39 x 10-4 3.7767 x 10-7 2.778 x 10-4 9.478 x 10-4
Work

0.2778 1 0.2390 6.639 x 10-4 0.1605 1.338 x 10-2 9.80665 1 2.34 x 10-3 3.7037 x 10-6 2.724 x 10-3 9.293 x 10-3
4.187 x 103 426.9 1 1.581 x 10-3 1.163 3.968
1.163 4.187 1 2.778 x 10-3 0.672 5.60 x 10-2
418.70 1.506 x 103 360 1 241.9 20.16
6
2.6478 x 10 2.7 x 105
632.54 1 735.5 2.51 x 103
1.731 6.232 1.488 4.134 x 10-3 1 8.333 x 10-2 3.6 x 103 367.10 0.860 1.3596 x 10-3 1 3.412
20.77 74.8 17.86 4.96 x 10-2 12 1 1.0551 x 103 107.58 0.252 0.398 x 10-3 0.2931 1
1J = 1N mm

SI unit Metric engineering unit Ft-lb system engineering unit

(work rate, production rate)

kW Kg f m/s kcal/h PS HP Ib f ft/s Btu/h

1 101.97 860.0 1.360 1.341 735.56 3.415 x 103
Power

9.807 x 10-3 1 8.431 1.333 x 10-2 1.315 x 10-2 7.233 33.46

1.163 x 10-3 0.1186 1 158. x 10-3 1.56 x 10-3 0.8576 3.968
0.7355 75.0 632.3 1 0.9863 542.4 2.509 x 103
0.7457 76.04 641.0 1.014 1 550.0 2.544 x 103
1.356 x 10-3 0.1383 1.184 1.844 x 10-3 1.820 x 10-3 1 4.627
2.931 x 10-4 2.989 x 10-2 0.2520 3.984 x 10-4 3.93 x 10-4 0.216 1

SI unit Metric engineering unit Ft-lb system engineering unit

Volumetric flow rate

m3/s m3/h m3/min /min American gal/min English gal/min ft 3/h

1 3.6 x 10 3
60 6 x 10 4
1.585 x 104 1.320 x 104 1.271 x 105
2.778 x 10-4 1 1.667 x 10-2 16.670 4.403 3.667 35.31
1.667 x 10-2 60 1 1 x 10 3 264.2 220.0 2.119 x 103
1.667 x 10-5 6 x 10-2 1x10-3 1 0.2642 0.220 2.1186
6.308 x 10-5 0.2271 3.785 x 10-3 3.785 1 0.8326 8.0190
7.577 x 10-5 0.2730 4.546 x 10-3 4.546 1.201 1 9.630
7.867 x 10-6 2.832 x 10-2 0.472 x 10-3 0.472 0.1247 0.1038 1

SI unit Metric engineering unit Ft-lb system engineering unit

English (ton) American (ton)
1 1 x 10-3 1 x 10-3 2.205 35.27 1.543 x 10 4 0.9842 x 10-3 1.1023 x 10-3
1 x 10 -3 1 1 x 10-6 2.205 x 10 -3 3.527 x 10-2 15.43 0.9842 x 10-6 1.1023 x 10-6
Mass

1 x 10 3 1 x 10 6 1 2.205 x 10 3 3.527 x 10 4 1.543 x 10 7 0.9842 1.1023

0.45359 453.6 0.4536 x 10 -3 1 16 7 x 10 3 4.464 x 10-4 5 x 10-4
2.835 x 10 -2 28.350 2.835 x 10 -5 0.0625 1 437.5 2.79 x 10-5 3.125 x 10-5
6.480 x 10 -5 6.48 x 10 -2 6.480 x 10 -8 1.4285 x 10-4 2.286 x 10-3 1 6.378 x 10-8 7.143 x 10-8
1.016 x 10 3 1.016 x 10 6 1.0160 2240 3.584 x 10 4 1.568 x 107 1 1.12
907.2 0.9072 x 10 6 0.9072 2000 3.2x104 1.40 x 10 7 0.8929 1

ACE R & A 156 www.aceind.co.kr