SDS U2404-80

CYCLE COUNTER
MODEL C1CM/C1CF C1SM/C1SF
STAINLESS STEEL
COUNTER FOR MONITORING THE NUMBER OF PUMP CYCLES OF POWERTRAPS

Features
Enables monitoring of the number of pumping
cycles of GP series PowerTraps to help determine
the timing of maintenance, or estimate the volume
of pumped condensate.
1. Two different types are available to support various
system requirements.
2. The Counter Unit types (C1CM(-EX) / C1CF(-EX)) C1SM/C1SM-EX
include a built-in LCD display and LED that flashes C1SF/C1SF-EX
with each operation cycle to allow easy direct
observation.
3. The Terminal Box Types (C1SM(-EX) / C1SF(-EX))
combine with an external display to enable remote
observation or integration into a broader monitoring
system. C1CM/C1CM-EX
4. Can be equipped on currently installed GP series C1CF/C1CF-EX
PowerTraps.
5. OK for installation outdoors.

Specifications
Model C1CM C1CM-EX C1CF C1CF-EX C1SM C1SM-EX C1SF C1SF-EX
Type Counter Unit Terminal Box
GP10, GP10M, GP10L, GP10, GP10M, GP10L,
Installable PowerTrap Models GP14, GP14M, GP14L GP10F, GP21F GP14, GP14M, GP14L GP10F, GP21F
Intrinsically Intrinsically Intrinsically Intrinsically
Description Standard Standard Standard Standard
Safe 1) Safe 1) Safe 1) Safe 1)
Connection Screwed
Size ½”
Max Operating Pressure (barg) PMO 2) 21
Max Operating Temperature (°C) TMO 2) 220
Ambient Pressure 2) Atmospheric
Ambient Temperature 2) -10 to 55 °C -45 to 90 °C -20 to 80 °C -45 to 90 °C -20 to 80 °C
Applicable Fluids 3) Steam, Air, Nitrogen, Steam Condensate, Water
Max. Input Power (Pi): 1W
Max. Incoming Voltage (Ui): 28V
Special Built-in Lithium Battery (3.6V) Max. Incoming Current (Ii): 120 mA
Power Supply 4)
Battery Life: approx. 10 years Max. Internal Capacitance (Ci): 3nF
Max. Internal Inductance (Li): 0
Note: (Ui)V x (Ii)A ≤ 1 W (Pi)
5)
Display 8 digit LCD —
Terminal — Wiring Inlet: G ½
Protection Class IP65
Accessories Counter Resetter —
1)
ATEX/IECEx or cULus. See reverse side for details of applicable standards. 1 bar = 0.1 MPa
2)
PMO and TMO apply to the inserted portion only. Ambient Pressure/Temperature apply to the external portion.
3) 4) 5)
Do not use for toxic, flammable or otherwise hazardous fluids. Battery cannot be replaced. Counter display can be reset to zero by using the included resetter.
DESIGN CONDITIONS FOR INSERTED PORTION (NOT OPERATING CONDITIONS): Maximum Allowable Pressure (barg) PMA: 21
Maximum Allowable Temperature (°C) TMA: 260
To avoid abnormal operation, accidents or serious injury, DO NOT
CAUTION use this product outside of the specification range. Local regulations
may restrict the use of this product to below the conditions quoted.
No. Description Material DIN* ASTM/AISI*
q Sensor Body Stainless Steel SUS303 1.4305 AISI303
w Sensor Arm Stainless Steel SUS304 1.4301 AISI304
e Counter Body Polyetherimide PEI PEI —
r Cap Polysulfone PSF PSF —
t Display (LCD) — — —
y LED — — —
u Switch Unit Polyetherimide PEI PEI —
i Terminal Box Die Cast Aluminium ADC ADC —
o Hex Socket Head Bolt Stainless Steel SUS304 1.4301 AISI304
!0 Nameplate Polyester — —
!1 Magnet Booster Kit Stainless Steel SUS304 1.4301 AISI304
* Equivalent materials
Dimensions
¡C1CM(-EX) / C1CF(-EX) Screwed C1CM(-EX) / C1CF(-EX) Screwed* (mm)

W1 Size L1 L2 L3 L4 H1 φW1 Weight (g)

½” 114 82 22 150 200 41 660

* R, other standards available (R is equivalent to BSPT)

H1 C1CM/C1CM-EX shown. C1CF/C1CF-EX differs only by the travel arc
Magnet
Booster Kit of the sensor arm.

R½

L4
L3 L2
C1CM/C1CM-EX C1CF/C1CF-EX
L1
Inserted Portion

¡C1SM(-EX) / C1SF(-EX) Screwed C1SM(-EX) / C1SF(-EX) Screwed* (mm)

Magnet Size L1 L2 L3 L4 H1 φW1 Weight (g)
Booster Kit
R½ ½” 195 164 22 150 49 80 700
W1

L4 * R, other standards available (R is equivalent to BSPT)

C1SM/C1SM-EX shown. C1SF/C1SF-EX differs only by the travel arc
H1

of the sensor arm.

L3 L2
G½
L1
Inserted Portion
C1SM/C1SM-EX C1SF/C1SF-EX

Installation Intrinsic Safety Standards

¡C1CM/C1CM-EX ¡C1SM/C1SM-EX Model Standard Class
ATEX Ⅱ2G Ex ib ⅡB T3/T2 DEKRA 13 ATEX 0038
C1CM-EX IECEx Ex ib ⅡB T3/T2 Gb IECEx DEK 13.0003
C1CF-EX Class I, Zone 1, AEx ib ⅡB T3/T2
cULus Class I, Zone 1, Ex ib ⅡB T3/T2
File No. E360402
ATEX ⅡG Ex ib ⅡC T3/T2 DEKRA 13 ATEX 0039
C1SM-EX IECEx Ex ib ⅡC T3/T2 Gb IECEx DEK 13.0004
C1SF-EX Class I, Zone 1, AEx ib ⅡC T3/T2
¡C1CF/C1CF-EX (C1SF/C1SF-EX)* cULus Class I, Zone 1, Ex ib ⅡC T3/T2
File No.E360402
Safety Barrier: The intrinsic safety specifications of the terminal box type
C1SM-EX/C1SF-EX require a safety barrier to be used.

Hazardous Area Non-hazardous Area

* Not shown Terminal box type: Electronic counter

C1SM-EX with built-in
NOTE: Cycle Counter cannot be installed on GP series PowerTraps C1SF-EX Safety Barrier battery
insulated with an insulation thickness exceeding 40 mm. (as one example)

SDS U2404-80 Rev. 9/2016

Products for intended use only.
Specifications subject to change without notice.