Solenoids

Solenoid SIN45DV-…-M40
to VDE 0580
Plug plate to ISO 4400/DIN 43650
Protection class IP65

DESCRIPTION FUNCTION APPLICATION

The SIN45DV-M40 is a switching solenoid. Its When the solenoid is energised with the Essential for hydraulic poppet valves. Because
design corresponds to VDE standard 0580. specified nominal voltage, the armature moves of the risk of overheating, the solenoid must
The steel housing has a zinc coated finish as from the starting position of its stroke (s=5,5 never be used separately. The lenght of the
standard. Static pressure-tightness is 160 bars. mm) to the end position (s=0 mm). The fixing screws depends on the base material of
All o-rings are Viton. The solenoids are fixed switching time is essentially dependent on the the body. An o-ring is used for the valve seal.
to the valve with eight screws. The solenoid application. The power-stroke characteristics Information on screws and o-rings will be found
will be supplied with a plug screw as standard, are designed to suit the requirements of in the data sheets relating to the valves
or depending on the intended use, with inte- hydraulic valves. AC versions include an concerned. Before changing the plug screw
grated manual override. The connector plate electronic rectifier integrated into the con- or the screw with integrated manual override,
corresponds to ISO 4400 and DIN 43650. nector plate. In this way maximum perform- care must be taken to ensure that the soleno-
ance is assured. id is not under pressure. Risk of injury! The
maximum operating pressure is determinded
by the valve actually used.

CONTENTS TYPE CODE

SI N 45D V - - M40 - #
DIMENSIONS .............................................. 1
Solenoid industry version
CHARACTERISTICS ................................... 2 Normaly
Double coil solenoid corr. † 45mm housing
PERFORMANCES ....................................... 2 Solenoid completly potted
Standard-nominal 12 VDC G12 110 VAC R110 ∗
ACCESSOIRES ........................................... 2 voltage UN 24 VDC G24 115 VAC R115 ∗
230 VAC R230 ∗
PARTS LIST ................................................. 2 AC = 50 to 60 Hz
∗ Rectifier integrated in the plug plate
Other nominal voltages and nominal performances on request

Additional marking for special sealing to valve

with mounted plug (data sheet 1.1-300) HB0

with mounted manual override (data sheet 1.1-300) HB6
with mounted special manual override (data sheet 1.1-310) H...

Design-Index (Subject to change)

DIMENSIONS

9 1 0
6 ,5
9 ,8
1 3 0
1 0 1 ,5
4 ,9

9 1
2 6

2 0
5 ,5

1 0

b e i a n g e z o g e m
A n k e r (s = 0 )

3 ,5 6 4 ,2 2 ,2 3 5 ,3 6
7 4 4 5

Wandfluh AG Tel. +41 33 672 72 72 E-mail: sales@wandfluh.com Illustrations not obligatory Data sheet no.
Postfach Fax +41 33 672 72 12 Internet: www.wandfluh.com Data subject to change 1.1-122E 1/2
CH-3714 Frutigen Edition 06 20
 Solenoids

CHARACTERISTICS
Static pressure tightness 160 bar (seal diameter of valve max. DC AC
26 mm) Totale stroke (mm) 5,5 5,5
Coil winding insulation class F Working stroke (mm) 2,5 2,5
Connection/Power supply Over device plug connection to ISO Nominal power (W) 60
4400/DIN 43650, (2P+E), other (VA) 70
connections on request. Armature weight (kg) 0,055 0,055
Protection class EN 60529 IP65 Solenoid weight (kg) 1,650 1,650
Relative duty factor 100% Voltage range (VDC) 10-250
Reference temperature 50°C (VAC) 80-250 ∗
Seal Viton, other on request
Fluid Mineral oil, other fluid on request ∗ For AC voltages below 80 VAC DC solenoids
Switching cycles 15'000/h plus rectifier plugs are available.
Mounting screws 8xM5 (Quality 8.8) 21 VDC to 24 VAC
Housing Zinc coated steel housing, other 32 VDC to 36 VAC
surface treatments on request. 36 VDC to 42 VAC
42 VDC to 48 VAC

12VDC 24VDC 115VAC 230VAC

Nominal resistance (Ω) 5 21,8 445 1'400
Number of windings (-) 770 1’560 7’000 13’000
Inductivity (mH) 9 36

PERFORMANCES ACCESSOIRES
F = f (s) Force-stroke characteristics
Plug HB0 ∗ Article No. 239.2033
(Valid for single coil)
F [N ]
Plug with integrated manual override HB6 ∗ Article No. 253.8001
1 6 0
K 0 0 6 3 .d s f

∗ acc. data sheet 1.1-300

Special manual override see data sheet 1.1-310

1 4 0
Plug grey Article No. 219.2001
Plug black Article No. 219.2002
1 2 0
Rectifier plug grey Article No. 219.2105
Rectifier plug black Article No. 219.2106
1 0 0

8 0

6 0

4 0

2 0

0
0 1 2 3 4 5 s [m m ]
1: U = 100 % UN Reference temperature = 20°C (30W)
2: U = 90 % UN Reference temperature = 50°C
Solenoid in operating temperature (19W)
The values refer to UN = 24 VDC.
With other nominal voltages deviations can occur.
For curve 2 the solenoids has been mounted on a body 46x92x64.

PARTS LIST

Position Article Description

10 212.0506 Washer
20 160.6188 O-ring ID 18,77x1,78 Technical explanation see data sheet 1.1-400E

Wandfluh AG Tel. +41 33 672 72 72 E-mail: sales@wandfluh.com Illustrations not obligatory Data sheet no.
Postfach Fax +41 33 672 72 12 Internet: www.wandfluh.com Data subject to change 1.1-122E 2/2
CH-3714 Frutigen Edition 06 20