Syballus PDF
Syballus PDF
Mechanical
Engineering 3rd to 8th Semester Examination
2016-17
PANJAB UNIVERSITY
CHANDIGARH
Vision and Mission of Department of Mechanical Engineering
Vision
To contribute to global development by producing knowledgeable, innovative, smart
and ethical professionals who are technically sound in the field of mechanical
engineering.
Mission
· Enable students to develop technical skills in the field of Mechanical
Engineering.
Marks
S. Subject Code Subject Name L-T-P Contact Credits Theory
No. hrs/week Internal Assessment University Exam Practical*
1 MEC-301 Applied Thermodynamics-I 3-1-2 6 5 50 50 50
2 MEC-302 Mechanics of Materials-I 3-1-2 6 5 50 50 50
3 MEC-303 Theory of Machines-I 3-1-2 6 5 50 50 50
4 MEC-304 Machine Drawing 1-0-4 5 3 50 ----- 100
5 MEC-305 Manufacturing Processes 3-1-2 6 5 50 50 50
6 AS 301 Math-3 3-1-0 4 4 50 50 ----
Total 33 27 300 250 300
Marks
S. Subject Subject Name L-T-P Contact Credits Theory
No. Code hrs/week Internal Assessment University Exam Practical*
1 MEC-401 Applied Thermodynamics-II 3-1-2 6 5 50 50 50
2 MEC-402 Mechanics of Materials-II 3-1-2 6 5 50 50 50
3 MEC-403 Theory of Machines-II 3-1-2 6 5 50 50 50
4 MEC-404 Numerical Analysis 3-1-0 4 4 50 50 ---
5 MEC-405 Manufacturing Technology- I 3-1-2 6 5 50 50 50
6 MEC-406 Fluid Mechanics 3-1-2 6 5 50 50 50
Total 34 29 300 300 250
*There will be four weeks vocational training after 4th Semester either in the College or in the Factories approved by the Principal / Head of the
Department
* Practical marks are for continuous and end semester evaluation and vocational training marks are of mid semester evaluation
and end semester evaluation
B.E. Mechanical Engineering
Fifth Semester
Marks
S. Subject Code Subject Name L-T-P Contact Credits Theory
No. hrs/week Internal Assessment University Exam Practical*
1 MEC-501 Design of Machine Elements-I 3-0-2 5 4 50 50 50
2 CAD/CAM (Computer Aided 3-1-2 6 50 50 50
MEC-502 5
Design & Manufacturing)
3 MEC-503 Robotics 3-1-2 6 5 50 50 50
4 MEC-504 Mechanical Measurement 3-0-2 5 4 50 50 50
5 MEC-505 Manufacturing Technology- II 3-0-2 5 4 50 50 50
6 MEC-506 Fluid Machinery 3-1-2 6 5 50 50 50
7 Vocational Training-1 (After 4th 1 --- --- 50
MEC-557
Semester)
Subjects offered by Design Innovation Centre(DIC) (OPTIONAL)
CS 506 Principles of Designing. 0-0-3 3 0 --- --- ---
Total : 33 28 300 300 350
* Practical marks are for continuous and end semester evaluation and vocational training marks are of mid semester evaluation
and end semester evaluation
B.E. Mechanical Engineering
Sixth Semester
Marks
S. Subject Code Subject Name L-T-P Contact Credits Theory
No. hrs/week Internal Assessment University Exam Practical*
1 MEC-601 Design of Machine Elements -II 3-0-2 5 4 50 50 50
2 MEC-602 Finite Element Methods 3-1-2 6 5 50 50 50
3 MEC-603 Mechanical Vibrations 3-1-2 6 5 50 50 50
4 MEC-604 Heat Transfer 3-1-2 6 5 50 50 50
5 MEC-605 Materials and Heat Treatment 3-0-2 5 4 50 50 50
6 MEC-606 Non Conventional Manufacturing 3-1-2 6 5 50 50 50
Total : 34 28 300 300 300
There will be four weeks Vocational Training in the manufacturing concerns after 6th semester
* Practical marks are for continuous and end semester evaluation and vocational training marks are of mid semester evaluation
and end semester evaluation
B.E. Mechanical Engineering
Seventh Semester
Marks
S. Subject Code Subject Name L-T-P Contact Credits Theory
No. hrs/week Internal Assessment University Exam Practical*
1 MEC-701 Refrigeration and Air Conditioning 3-1-2 6 5 50 50 50
2 MEC-702 Automatic Controls 3-0-2 5 4 50 50 50
3 MEC-703 Automobile Engineering 3-0-2 5 4 50 50 50
4 MEC-704 Total Quality Management 3-0-2 5 4 50 50 50
5 MEC-705 Elective-I 3-1-2 6 5 50 50 50
6 MEC-756 Minor Project 0-0-4 4 2 --- --- 100
7 MEC-757 Vocational Training after 6th semester 1 --- --- 50
Total 31 25 250 250 400
* Practical marks are for continuous and end semester evaluation and vocational training marks are of mid semester evaluation
and end semester evaluation
Marks
S. Subject Code Subject Name L-T-P Contact Credits Theory
No. hrs/week Internal Assessment University Exam Practical*
1 MEC-801 Mechatronics 3-1-2 6 5 50 50 50
2 MEC-802 Operation Research 3-1-2 6 5 50 50 50
2 MEC-803 Computational Fluid Dynamics 3-1-2 6 5 50 50 50
3 MEC-804 Elective-II 3-1-2 6 5 50 50 50
4 MEC-855 Major Project 0-0-8 8 4 --- --- 150
Total 32 24 200 200 350
1. The project will continue for a period of two weeks after 8th semester examinations.
2. In case of elective subject where there is no lab, project work/ seminar may be given.
3. The students who want to undergo one semester industrial training will be required to follow the rules and regulations of
Industrial Training Committee.
8th Semester :- Elective-II
1. MEC -804 (a) Experimental Stress Analysis
2. MEC -854 (a) Experimental Stress Analysis
3. MEC- 804 (b) Metrology
4. MEC -854 (b) Metrology
5. MEC- 804 (c) Mechanical Handling
6. MEC- 854 (c) Mechanical Handling
7. MEC- 804 (d) Bearings and Lubrication
8. MEC- 854 (d) Bearings and Lubrication
9. MEC- 804 (e) Plastic and Rubber Technology
10. MEC- 854 (e) Plastic and Rubber Technology
11. MEC -804 (f) Advanced Fluid Machinery
12. MEC -854 (f) Advanced Fluid Machinery
13. MEC- 804 (g) Production and Operations Management
14. MEC -854 (g) Production and Operations Management
15. MEC -804 (h) Theory of elasticity & plasticity
16. MEC -854 (h) Theory of elasticity & plasticity
17. MEC- 804 (i) Advanced Mechanics of Materials -2
18. MEC -854 (i) Advanced Mechanics of Materials -2
19. MEC -804 (j) Advances in Engineering Materials
20. MEC- 854 (j) Advances in Engineering Materials
21. MEC -804(k) Mechanical Behavior of Materials-2
22. MEC -854(k) Mechanical Behavior of Materials-2
23. MEC- 804(l) Rotor Dynamics
24. MEC- 854(l) Rotor Dynamics
25. MEC-804(m) Imaging And Additive Manufacturing
26. MEC-854(m) Imaging And Additive Manufacturing
OPTION 2
MEC-856: INDUSTRIAL TRAINING FOR SIX (06) MONTHS DURATION.
(24 credits and 750 marks)
EIGHTH SEMESTER
OPTION 2
Paper External Internal
Paper Title Duration Total
Code Assessment Assessment
MEC-856 Industrial Training 6 Months 400 350 750
* Industrial training marks are for mid semester evaluation and end semester evaluation
COURSE INFORMATION SHEET
Note : There are 7 questions in total. First question is objective type covering the whole
syllabus and is compulsory. Attempt at least two questions from each PART A and PART B
Part A
1. Laws Of Thermodynamics:
First law of thermodynamics, Steady flow energy equation and its applications (nozzle,
throttling device, turbine, compressor, heat exchanger). Limitations of first law, statements of
second law by Max-Planck and Clausius, equivalence between the two
statements. Reversible and irreversible processes, Carnot’s theorem. Energy analysis
of a heat engine, refrigerator and heat pump, Classius Theorem, Classius Inequality and
concept of Entropy, Entropy change in an Irreversible Process, Application of Entropy (8 hrs)
Principle.
Part B
4. Nozzles and Diffusers :
Types and utility of nozzles. Flow of steam through nozzles. Effect of friction. Nozzle
efficiency. Critical pressure conditions for maximum discharge. Idea of total or stagnation
enthalpy and pressure , general relationship of area velocity and pressure in nozzle flow,
Supersaturated flow. Classification of diffusers, effect of friction and area change parameters (5 hrs)
affecting the performance of nozzle.
6. Reaction Turbine :
Degree of reaction, velocity diagrams, blade efficiency and its derivation, calculation of
blade height etc. Requirement of an ideal working fluid, Methods of attachment of blades to
turbine rotor, losses in steam turbine, Labyrinth packing and governing of steam turbine
turbine rotor, losses in steam turbine, Labyrinth packing and governing of steam turbine. (5 hrs)
Blade materials.
7. Condensers :
Utility of condenser. Elements of condensing plants. Brief description of different types of (4 hrs)
condensers. Requirement of modern condenser, Dalton’s law of partial pressure applied to
condenser problems, condenser and vacuum efficiencies. Cooling water calculations. Effect of
air leakage. Methods of checking and preventing air infiltration.
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Basic and Applied P.K. Nag Tata McGraw-Hill.
Thermodynamics
2 Themodynamics: An Yunus.A.Cengel and McGraw-Hill Higher Education
Engineering Approach Michael.A.Boles
3 Engineering Gordon Rogers and Yon Pearson Education India.
Thermodynamics:Work and Mayhew
Heat transfer
4 Thermodynamics and Heat R.Yadav Central Publishers
Engines
COURSE INFORMATION SHEET
List of Experiments
PART-A
2 Strain: Tension Test and Normal Strain, Stress-Strain Relationships, Hooke’s Law,
PoissonRatio, Thermal Strain and Deformation, Idealizations in Constitutive Relations,
Linearly Viscoelastic Materials, Cyclic Loading: Fatigue. (2)
PART-B
8 Shear Stresses in Beams: Shear Flow, Shear Stress in Beams, Warpage of Plane
SectionsDue to Shear, Limitations of Shear Stress Formula, Shear Stress in Beam Flanges,
Shear Center, Combined Direct and Torsional Shear Stresses, Stresses and Deflection of
Closely Coiled Helical Springs. (3)
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
Strength of Materials MacMillan India
1 G. H. Ryder
(SI Units), 3/e Ltd., 1969
Mechanics of Tata McGraw Hill
2 F. P. Beer, E.R. Johnston Jr.
Materials, 5/e Pvt. Ltd., 2009
Mechanics of Pearson Education
3 R. C. Hibbeler
Materials, 6/e India Pvt. Ltd., 2007
Strength of Cengage Learning
4 J. M. Gere, B. J. Goodno
Materials,2/e India Pvt. Ltd., 2009
Mechanics of Solids, PHI India Pvt. Ltd.,
5 E. P. Popov
2/e 2009
Strength of Materials CBS
6 S. Timoshenko
Vol. 1 & 2, 3/e Publishers,1986
Advanced Mechanics Wiley India Ltd,
7 A.P.Boresi, R.J.Schmidt
of Materials 6/e 2009
COURSE INFORMATION SHEET
SYLLABUS Lectures
There are 7 questions in total. First question is objective type covering the whole syllabus
and is compulsory. Attempt at least two questions from each PART A and PART B
1. Basic concepts
Kinematics and Dynamics of Machines, Mechanism, Pairs, Inversions of slider crank chains, (3)
Degrees of freedom, Kutzbach's equation. Grubler criterion and Numerical problems
2. Velocity and Acceleration:
Basic concepts of machines, link, Mechanism, Kinematic chain, relative motion of parts of
Mechanism, displacement, velocity, acceleration diagrams of all basic mechanisms including (5)
quick return motion mechanism. Advance problems on velocity diagrams (relative velocity
method, instantaneous center method).
Acceleration diagram. Coriollis component. Advanced problems involving their application
and torque calculation.
3: Kinematics Synthesis of Mechanism.
Movability, Number synthesis, Frudensteins’s equation. Chebyshev spacing of precision
points, Two and three position synthesis of Four-bar mechanism and slider crank (4)
mechanism, Overlay Method, Block’s method, Transmission angle, Limit position and Least
square techniques.
4: Flywheel and Turning Movement Diagrams:
Turning moment and crank effort diagrams for steam and I.C. engine, dynamics of simple
horizontal and vertical engine. Fluctuation of speed, co-efficient of fluctuation of speed and
energy.
Simple problems on turning moment diagrams and the determination of size of a flywheel (4)
taking centrifugal stresses into consideration.
5: Force Analysis:
Equations of equilibrium, Couple, equilibrium of three force and four force systems, Free
body diagrams, Forces on slider crank mechanism, quick return mechanism, four bar
mechanism and slider crank mechanism with friction at turning pairs and numerical (4)
problems.
PART-B
6: Friction
Efficiency of inclined plane, Friction in V-threads, screw-jack, pivots and collars plate and
cone-clutches, Power lost in friction, friction circle and the friction axis of a link. (4)
7: Belts, Ropes and chains.
Materials, type of drive, idle pulley, intermediate or counter shaft pulley, angle and right
angle drive, quarter turn drive, velocity ratio, crowning of pulley, loose and fast pulleys,
stepped or cone pulleys, ratio of tensions on tight and slack sides of belt. Power transmitted (4)
by belts with consideration of creep and slip, centrifugal tension and its effect on power
transmitted. Use of gravity idler, flat, V-belts and rope material, Length of belt, rope and
chain drive, types of chains.
8: Brakes and Dynamometer:
Types of brakes, principle of friction brakes, band, band and block, internal expanding shoe
brakes, simple Problems of these brakes, description of vacuum brake, types of
dynamometer, measurement of power by Prone brake and rope brake dynamometer, belt (4)
transmission dynamometer, Heenan and Froude’s Hydraulic dynamometer, Bevis- Gibson’s
flash light torsion dynamometer.
9: Governors.
Functions, types and characteristics of governors, Watt, Porter and Proell governors.
Hartnell and Wilson-Hartnell spring loaded governors. Simple numerical problems on these
governors. Sensitivity, stability,Isochronism and hunting of governors, governor effort and
power controlling force curve, effect of sleeve friction. (4)
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Theory of Machines J. Lal&Shah Metropoltian Book-seller
&Publishers,New Delhi
2 Theory of Machines P.L Ballaney KhannaPublisher,Delhi
3 Theory of Machines Shigley McGraw Hill
4 Theory of Machines V P Singh DhanpatRai and Company
COURSE INFORMATION SHEET
SYLLABUS Lectures
List of Experiments
1. (a) Find the moment of inertia of a given body with the help of Fly-wheel.
(b) Calculate the minimum possible periods of oscillation if the point of
suspension may be moved .
2. Study and draw the sketches of difference inversions of single slider chain and double
slider crank chain.
3. Find the co- efficient of friction for different belt material on a cast iron : Pulley.
4. To perform the various practical on Universal Governor Apparatus.
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Theory of Machines V P Singh DhanpatRai and Company
COURSE INFORMATION SHEET
Course 1. To enable students to be able to communicate their ideas and concepts using sketches and engineering
Objectives( drawings.
CO) : 2. To enable the students to have knowledge of various symbols and standards used in machine drawings in
industry.
3. To understand drawing and working of a number of machine elements.
4. To develop the technical skills necessary to create or modify the machine drawing using Computer
Aided Drafting system.
Course 1. Ability to interpret and communicate engineering drawings having a number of symbols, standards and
Outcome : views.
2. Ability to understand various symbols and standards of machine drawing.
3. Students understand the technical intricacies involved in drawing and working of screws, bolts, pipe
fittings, cotter joint, knuckle joint, pulleys, brackets, couplings, bearings, engine parts, tail stock, screw
jack, vices, valves etc.
4. Ability to create 3D models of engineering objects, machine drawings with different views, and an
assembly of the objects that make up engineered systems, using a CAD system (e.g. AutoCAD etc.).
SYLLABUS Lectures
Note: Students should develop the understanding of study of drawing with reference to manufacturing processes,
projections, assembly drawings and should be able to draw simple assembly drawings, projections and 3-D solid
models of simple machine parts. The syllabus given here indicates the broad outlines and the scope of subject to be
covered. Teacher concerned may take suitable examples to make the student understand the topic.
3. Form of screw threads, conventional representations of single and multi start threads, bolts, studs, screw, locking 6
devices, riveted joints and symbols, welded joints and symbols, pipe and pipe fittings and symbols.(3 Solid
Models Min.)
4. Cotter joints, knuckle joints. Pulleys and brackets. (3 Solid Models Min.) 4
5. Flange and muff coupling. Pin type flexible coupling; claw Coupling and cone friction clutch. (3 Solid Models
5
Min.)
6. Footstep bearing, Journal bearing, Ball bearing, Roller bearing, Plummer block (3 Solid Models Min.). 5
7. I.C. Engine Piston, connecting rod, Spark plug, Fuel pump, Fuel injector (2 Solid Models Min.) 4
8. Miscellaneous: Tail stock, Screw jack, Bench vice, Crane hook, Relief valve (2 Solid Models Min.) 5
RECOMMENDED BOOKS
5. Machine Drawing K L Narayana, P Kannaiah and K New Age International Publishers, New
Venkata Reddy Delhi, 2011
COURSE INFORMATION SHEET
Course 1. To develop the technical skills necessary to successfully use a computer aided drafting system
Objectives( such as Auto-CAD.
CO) : 2. To develop the technical skills necessary to produce drawing of machine elements using a
modern CAD system.
3. To develop the technical skills necessary to produce assembly drawings.
4. To develop the ability to produce 3-D Solid model of engineering products using CAD system.
Course 1. Ability to communicate the ideas and concepts using CAD software.
Outcome : 2. Ability to draw and communicate orthographic and isometric drawings using CAD system.
3. Ability to draw and communicate assembly drawings and sectional views.
4. Ability to develop 3-D solid models to best represent the real life mechanical systems.
SYLLABUS
The candidates will be required to make minimum of 16 three-dimensional solid models covering syllabus MEC-304
using the software such as AutoCAD or Pro-E or Inventor etc. as per B.I.S. SP46-2003 for General Engg. Drawing. First
angle method of Projection should be used.
RECOMMENDED BOOKS
ofmould making
SYLLABUS
Note: There are 7 questions in total. First question is objective type covering the whole syllabus
and is compulsory. Attempt at least two questions from each PART A and PART B
PART-A
1. Fundamentals of Engineering Materials: Metal (Cast Iron, Pig Iron and Steel) and
Alloys(Aluminum, Copper, Magnesium, Nickel and Steel), Non-ferrous materials (Aluminum,
Cobalt, Copper, lead, Magnesium, Nickel, Tin and Zinc) and Non-Metal, Mechanical behavior,
Physical properties, Manufacturing properties, Testing, Applications of Engineering Materials. (8)
2. Metal forming
(a) Definition and classification of metal forming, type of rolling, hot rolling, rolling mills,
forging, smith forging, drop forging, machining forging and press forging, defects in forging.
(b) pipe and tube manufacture, extrusion, hot spinning, drawing and cupping, piercing, cold rolling,
wire drawing, rod and tube drawing, metal spinning, coining, embossing and shot peening, sheet metal
working operations, piercing, blanking, bending and drawing, punch and die setup, presses (9).
PART-B
3. Foundry: Introduction to Casting Processes, Basic Steps in Casting Process, Expandable
andpermanent mould casting processes, Pattern, Types of Patterns, Pattern Allowances, Risers,
Runners, Gates, Moulding Sand and its composition, Sand Preparation, Molding Methods, Core
Sands and Core Making, Core Assembly, Mold Assembly, Melting and Pouring, Cooling and
Solidification, Elementary and brief description of various melting furnaces, Fettling, Casting
Defects and Remedies.(7)
4. Welding: (a) Definition and classification, types of welded joints, weldabillity, Gas welding:
oxy-acetylene welding, equipment, lighting up, type of flames, welding techniques, welding of
cast iron, flame cutting, advantages and limitations Electric arc welding : principle, metal transfer
in arc welding, straight & reverse polarity in AC & DC, relative merits & demerits, various electric
arc welding processes, coding & selection of welding electrodes.
(b) TIG, MIG welding processes, electric resistance welding, spot, butt, seam, upset, projection
&high frequency resistance welding, thermit welding, brazing and soldering, description of
special welding techniques, choice of process for welding, defects in welding joint, their causes
and remedies.(10)
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Workshop Technology Vol. I & II HazraChowdhry Media Promotors
2 Manufacturing materials & process Lindberg Prentice Hall
3 Manufacturing processes Begeman John Wiley
4 Workshop Technology S.K. Garg Laxmi Publications
5 Production Technology R K Jain Khanna
COURSE INFORMATION SHEET
SYLLABUS Lecture
s
Note: There are 7 questions in total. First question is objective type covering the whole
syllabus and is compulsory. Attempt at least two questions from each PART A and
PART B
PART A
Sequences and Series: Sequences, Limits of sequences, Infinite series, series of positive terms,
Integral test, Comparison test, Ratio test, Root test. Alternating series, Absolute and (8)
Conditional Convergence, Leibnitz test. Power series: radius of convergence of power series,
Taylor’s and Maclaurin’s Series, Formulae for remainder term in Taylor and Maclaurin series,
Error estimates.
Linear Algebra: Concept of linear independence and dependence, Rank of a matrix: Row – (7)
Echelon form, System of linear equations: Condition for consistency of system of linear
equations, Solution by Gauss elimination method. Inverse of a matrix: Gauss – Jordan
elimination method.
(7)
Eigen values, eigen vectors, Cayley – Hamilton theorem (statement only). Similarity of
matrices, Basis of eigenvectors, diagonalization.
PART B
(8)
Complex Functions: Definition of a Complex Function, Concept of continuity and
differentiability of a complex function, Cauchy – Riemann equations, necessary and sufficient
conditions for differentiability (Statement only). Study of complex functions: Exponential
function, Trigonometric functions, Hyperbolic functions, real and imaginary part of
trigonometric and hyperbolic functions, Logarithmic functions of a complex variable, complex
exponents. (7)
Laurent Series of function of complex variable, Singularities and Zeros, Residues at simple poles and
Residue at a pole of any order, Residue Theorem (Statement only) and its simple applications. (8)
Conformal Mappings, Linear Fractional Transformations
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Advanced Engineering E. Kreyszig John Wiley
Mathematics
2 Calculus G. B. Thomas, R. L. Finney Pearson Education
3 Advanced Engineering Michael D. Greenberg Pearson Education
Mathematics
4 Complex Variables and R. V. Churchill, J. W. Brown McGraw-Hill
Applications
COURSE INFORMATION SHEET
3. Analyze the Rankine cycle with various configurations to optimize the design of a
power plant and use the computer to synthesize and evaluate the design.
SYLLABUS Lectures
Note: There are 7 questions in total. First question is objective type covering the whole syllabus
and is compulsory. Attempt at least two questions from each PART A and PART B
Part-A
1. Thermodynamics of I.C. Engines:
1.1 Introduction: I C Engine classification; Operation of two stroke and four
strokereciprocating I.C. Engines and rotary (Wankel) engine and their comparison. Comparison
of SI and CI engines, Otto Cycle – The Ideal Cycle for SI Engines Diesel Cycle – The Ideal
for CI Engines. Deviation of actual cycles from ideal cycles.Pressure- Time diagram for I.C.
Engines Cycle ( 8 hrs)
1.2 Combustion in SI Engines: Combustion in S.I. Engines, Combustion phenomenon,
flamespeed, ignition delay, effect of engine variables on Delay Period, abnormal
combustion, preignition, detonation, effect of various engine parameters on detonation,
effect of detonation on engine performance and methods employed to reduce detonation.
Combustion chamber design for S.I. Engines
1.3 Combustion in CI Engines: Combustion in C.I. Engines, Combustion phenomenon,
Delayperiod, Diesel Knock, CI engine combustion chambers, High speed cinematography for
combustion visualization- a brief note.
1.4 Fuels: rating of SI Engines fuels; cetane ratings of CI Engine fuels, Octane and
Cetanenumbers
1.5 Performance of IC engines: Performance curves of C.I. and S.I engines. Overall IC
engine performance (engine sizing, mean effective pressure (MEP), power and torque) Effect
of compression ratio and of air fuel ratio on power and efficiency of an engine: Variation of
engine power with altitude, supercharging, its advantages and its applications, types of
superchargers (2)
2. Gas Turbines:
Introduction; Classification of Gas turbines: on the basis of system of operation and on the
basis of combustion (at constant volume, or at constant pressure).
Thermodynamics of constant 5 hrs
pressure gas turbine cycle: calculation of net output, work ratio and thermal efficiency of ideal
and actual cycles; cycle air rate, temperature ratio; effect of change in Sp. heat and
mass of fuel on power and efficiency. Operating variables and their effects on thermal
efficiency and work ratio Thermal refinements and their effects on gas turbine cycle .i.e. gas
turbine cycle with regeneration, inter cooling and reheating; multistage compression and
expansion , pressure losses in heat exchangers and combustion chambers. Comparison of gas
turbine with a steam turbine and I.C. engine. Field of application of gas turbine.
Part-B
4. Air Compressors:
Introduction: Classification of air compressors, Use of compressed air in industry,Complete
representation of compression process on p-V and T-S coordinates with detailed description of
areas representing total work done and polytropic work done.
1 hr
4.1 Reciprocating Air Compressors:
Operation of single stage reciprocating compressors, construction, operation, work input and
the best index of compression, Heat rejected to cooling medium.Isothermal, polytropic ,
mechanical and volumetric efficiency.Effect of various parameters on volumetric efficiency,
Free air delivery, Multi stage compression and its advantages. Cylinder arrangements for multi 5 hrs
stage compressors. Work input in multistage compression, Performance curves of
reciprocating compressors.
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Thermodynamics and Heat R.Yadav Central Publishers
Engines
2 Gas Turbine V Ganesan Tata McGraw-Hill
3 Gas Turbine Theory Cohan H. and Rogers and Longmans
Sarvanamuttoo
4 Fundamentals of S. M. Yahya New Age International
compressible flow with
aircraft and rocket
propulsion
5 Themodynamics: An Yunus.A.Cengel and McGraw-Hill Higher Education
Engineering Approach Michael.A.Boles
6 Applied Thermodynamics T. D. Eastop and A. Prentice Hall
for Engineering McConkey
Technologists
COURSE INFORMATION SHEET
1. Study of constructional details, cooling system, Lubrication system and Fuel Flow system of
following Engines;
4. Determination of B.H.P. at various loads (pump being given fixed setting not to be changed by
governor) for a Diesel Engine/Semi Diesel Engine. Graphical representation of B.H.P. and torque with
speed and its interpretation.
5. Trial of a Diesel Engine/Semi Diesel Engine. Determination of B.H.P., fuel consumption ,I.H.P.
and mechanical efficiency at various loads (speed parameters constant). Discussion on variation of
thermal efficiency and specific fuel consumption with B.H.P.
6. To estimate the indicated power, friction power and mechanical efficiency of a multi cylinder petrol
engine when running at constant speed under constant settings of a carburetor (Morse test).
7. To obtain a power consumption curve, thermal and mechanical efficiency curve for the four stroke
diesel engine when tested over a range of power from no load to full load. Also to draw up the heat
balance sheet for this range of output of power.
PART-B
5 Columns: Instability, Criteria for Stability of Equilibrium, Euler Load for Columns
withDifferent End Restraints, Limitations of Euler Formula, Generalized Euler Formula,
Eccentric Loads and Secant Formula, Beam Columns, Differential Equation for Beam
Columns; Design of Columns loaded Concentrically and Eccentrically, Lateral Stability of
Beams. (3)
6 Strain Energy and Virtual Work: Elastic Strain Energy and External Work,
Displacementsby Conservation of Energy; Virtual Work Principle, Virtual Forces for
Deflections, Virtual Force Equations for Elastic Systems, Indeterminate Problems, Virtual
Displacements for Equilibrium, Discrete Systems; Strain Energy and Complementary Strain
Energy, Castigliano’s Theorems, Indeterminate Systems, Buckling Loads. (4)
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
Strength of Materials
1 G. H. Ryder MacMillan India Ltd., 1969
(SI Units), 3/e
F. P. Beer,
Mechanics of Materials,
2 E.R. Johnston Tata McGraw Hill Pvt. Ltd., 2009
5/e
Jr.
Mechanics of Materials, Pearson Education India Pvt. Ltd.,
3 R. C. Hibbeler
6/e 2007
Strength of J. M. Gere, B. Cengage Learning India Pvt. Ltd.,
4
Materials,2/e J. Goodno 2009
5 Mechanics of Solids, 2/e E. P. Popov PHI India Pvt. Ltd., 2009
Strength of Materials
6 S. Timoshenko CBS Publishers,1986
Vol. 1 & 2, 3/e
Advanced Mechanics of A.P.Boresi,
7 Wiley India Pvt. Ltd, 2009
Materials 6/e R.J.Schmidt
COURSE INFORMATION SHEET
SYLLABUS
8. Study of Buckling Test
9. Study time dependent deformation with Creep test.
10. Study of wood testing machine and performance of various tests on it.
11. Experiment to find shear centre for unsymmetrical sections.
12. Experiment to determine stress distribution in thin cylindrical pressure vessels.
13. Strain Gage Demonstration
14. Photo-elasticity Demonstration
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
Mechanics of Materials vol. 1&
1. E.J.Hearn Butterworth-Heinemann
2
COURSE INFORMATION SHEET
Course 1. Students will be able to design gears and understand transmission of forces
Outcome : 2. Students will be able to design different types of cam mechanism
3. Students will be able to understand the inertia forces involved during engine force
and power transmissions
4. Students can generate various mechanisms related to lower pairs and solve engine
problems related to balancing of rotating and reciprocating parts
SYLLABUS Lecture
s
Note: There are 7 questions in total. First question is objective type covering the
whole syllabus and is compulsory. Attempt at least two questions from each PART
A and PART B.
Part-A
1. Inertia Forces in Mechanism
Determination of Forces and couples for a link, inertia of reciprocating parts, dynamically
equivalent system. Analytical and graphical methods, inertia force analysis of basic engine 5
mechanism (crank, connecting rod and piston etc). Torque required to overcome inertia and
gravitational force of a four bar linkage.
Lower Pairs: -
Universal Joint: - single and double, calculation of maximum torque, Oldham’s Coupling, steering
mechanism including. AcKermann’s and Davis steering mechanism. Mechanisms with lower
pairs, pantograph, exact and approximate straight line motion, engine indicator, elliptical 4
trammel.
Gyroscope:-
Definition, axis of spin, axis of precession gyroscope, gyroscopic couple, Gyroscope effect on 5
the momentum of ships and vehicle, ship stabilization, stability of automobile and locomotive
taking a turn.
2. Cams
Types of cams and followers, definition – basic circle & least radius, angle of ascent, dwell, 7
descent & action. Displacement, velocity and acceleration diagrams for the followers with uniform
velocity motion, simple harmonic motion, uniform acceleration and retardation, determination of
maximum velocity, acceleration and retardation, analysis of follower motion for pre-specified cam
profiles (tangent cams and convex cams).
Part-B
3. Balancing
Classification , need for balancing, balancing for simple and multiple masses, static and dynamic
balancing – Primary and secondary balancing for reciprocating masses, inside and 7 outside the
cylinder locomotive balancing, swaying couple and variation of tractive effort, partial balancing of
locomotive, balancing of the coupled locomotives and its advantages multicylinder
in the line engines ( primary and secondary balancing conditions and their applications ),
balancing of V-engines balancing machines (Static balancing M/c: dynamic balancing M/c,
universal balancing M/c), introduction of balancing of the flexible rotors.
4. Gears
Toothed gears are their uses, types of toothed gears (spur gears, internal spur gears, spur &rack,
bevel gears, helical gears, double helical gears, spiral gears, worm gears) definitions, pitch circle
diameter, pitch surface, pitch point, circular pitch, diametric pitch, module pitch, addendum, 8
dedendum, clearance addendum circle, outside diameter, internal diameter, dedendum circle,
root diameter ,base.
Base circle diameter, face and flank of tooth, fillet, angle of obliquity or pressure angle, path of
contact, arc of contact, arc of approach, condition for correct gearing, forms of teeth, cycloid and
its teeth variants epicycloids and hypocycloid, involute methods of drawing in involute and
cycloidal curves, interference in involute gears and methods of its removal, comparison of
involute and cycloidal gear systems. 5
5. Gear Trains
Types of gear trains single and compound epicyclic gear trains, Problems involving their
applications, estimation of velocity ratio of worm and worm wheel, helical and spiral gears
(Determination of No. teeth, spiral angle and efficiency).
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Mechanism and Machine Ambekar A.G Prentice-Hall of India,2007
Theory
2 Theory of Machines S S Rattan Tata McGraw
3 Theory of Machines Shigley Tata McGraw Hill
COURSE INFORMATION SHEET
Course 1. Students will be able to design gears and understand transmission of forces
Outcome : 2. Students will be able to design different types of cam mechanism
3. Students will be able to understand the inertia forces involved during engine force
and power transmissions
4. Students can generate various mechanisms related to lower pairs and solve engine
problems related to balancing of rotating and reciprocating parts
SYLLABUS
1.Balance experimentally the given known force by introducing two weight (forces) parallel to the given
force in two different planes and verify the result by analytical method.
2.Study the dynamic balancing machine & balance of a given body i.e. rotor by different methods.
3.Study the working and construction of the two types of steering gears. Draw neat sketches of each type
and measure the angle in Ackerman's steering gear fined in different vehicles. Find the ratio of
intersection of two arms from the front axle to the base of the vehicle.
4.Study the different types of mechanisms for tracing out the approximate straight line.
5.Find out the pressure distribution graph analytically & practically around a simple Journal bearing
under variable load conditions on the shaft.
6.Balance as far as possible the known unbalance due to reciprocating parts by introducing two revolving
weights in two different planes. Find out experimentally the fraction of the reciprocating pans which
should be balanced so that the residual unbalance force may be least.
7.Find out experimentally the viscosity of the given fluid under varying conditions of temperature and
pressure and draw the graphs - Viscosity Vs' temp. and Viscosity Vs pressure.
8.Study the electrical dynamometer and find out the maximum torque of the given m/c.
9.Study the whirling speed apparatus and calculate the critical speed of the given System.
10.Find out the Co-efficient of friction between two given materials with the concept of vibration that is
the effect of C. & frequency on co-efficient of friction.
11.To study the model of an Epicyclical gear train and to determine the speed ratio.
12.To study the various tooth profiles and to generate the involute profile on a blank.
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Mechanism and Machine Ambekar A.G Prentice-Hall of India,2007
Theory
2 Theory of Machines S S Rattan Tata McGraw
3 Theory of Machines Shigley Tata McGraw Hill
COURSE INFORMATION SHEET
3. The students will be able to write their own MATLAB programs to implement
these numerical methods to solve engineering problems.
SYLLABUS Lectures
Note: There are 7 questions in total. First question is objective type covering the whole syllabus
and is compulsory. Attempt at least two questions from each PART A and PART B
PART A
Error analysis: Relative error, Absolute error, Round-off error, Truncation error,
significantdigits and numerical instability. (Scope as in Section 1.3, Chapter 1 of Reference
1).
(4
Lectures) Transcendental and polynomial equations: Bisection method, Iteration Method
based on firstdegree equation: Secant method, Regula-falsi method and Newton – Raphson
methods, Rate of convergence of Secant method, Regula-Falsi method and Newton-Raphson
Method. Bairestow’s method to find quadratic factor of a polynomial (Scope as in
corresponding topics in Section 2.3, 2.5, 2.9 of Chapter 2 of Reference 1)
(8 Lectures)
Interpolation: Polynomial interpolation: Finite differences, Lagrange and
Newtoninterpolation (Forward, Backward and Divided difference methods), inverse
interpolation, Hermite interpolation (Scope as in corresponding topics in Section 4.1-4.3, 4.5
of Chapter 4 of Reference 1)
(10 Lectures)
PART B
Numerical Integration: Trapezoidal Rule, Simpson’s 1/3 and 1/8 rule, Romberg
integration,Newton – Coates formulae (Scope as in corresponding topics in Section 5.7,
5.8 of Chapter 5 of Reference 1).
(5 )
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Numerical Methods for M. K. Jain, S. R. K. Iyenger, New Age International Publishers
Scientific and Engineering R. K. Jain
Computation
2 Introduction Methods of S. S. Sastry Prentice Hall.
Numerical Analysis
3 Computer Oriented V. Rajaraman Prentice Hall.
Numerical Methods
COURSE INFORMATION SHEET
SYLLABUS
Note: There are 7 questions in total. First question is objective type covering the whole syllabus and
is compulsory. Attempt at least two questions from each PART A and PART B.
PART-A
1. Metal cutting & Tool life
Basic tool geometry, single point tool nomenclature, chips-various types and their characteristics,
mechanism of chip formation, theoretical and experimental determination of shear angle,
orthogonal and oblique metal cutting, metal cutting theories, relationship of velocities, forces and
power consumption.
Effect of operating parameters life tool geometry, cutting speed, feed depth of out, coolant,
materials etc on forces temp. Tool life, surface finish etc., tool life relationship, tailor equation of
tool life, tool material and mechanism. (6)
2. Centre Lathe and Special Purpose Lathes
Centre lathe, constructional features, cutting tool geometry, various operations, taper turning
methods, thread cutting methods, special attachments, machining time and power estimation.
Capstan and turret lathes – automats– single spindle, Swiss type, automatic screw type, multi
spindle - Turret Indexing mechanism, Bar feed mechanism. (4)
3. Shaping & Planning: Principle, description & functions of lathe, specifications, work
holdingdevices, tools & operations. Working principle of shaper, planer and slotter, Specification
of shaper, planer and slotting machine Quick return mechanism, types of tools Speed and feed
used in above processes. Commonly used cutting tool materials. (5)
4. Milling & Drilling : Milling; principle, types of milling machines, specifications of milling machine,
Introduction to indexing, Multipoint cutting tool, Types of milling cutters. Principles, Classification
of drilling machine, Different operations on drilling machine, Speed and feed in drilling.(4)
PART-B
Broaching: Broach, Nomenclature, cutting action of broach, Broaching operations and applications.
(7)
SYLLABUS
1. To prepare a job on lathe machine- involves turning, grooving, drilling, boring & threading
operation.
2. To prepare a job on shaper machine.
3. To prepare a job on milling machine.
4. To prepare a job on drill machine- involves drilling, counter sunk & reaming
operation. 5. To prepare a job involves-Grinding and thread manufacturing operation.
6. Application of sheet metal fabrication techniques.
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1 Tool Design Cole, C. B American Technical Society
Pub
2 Tool Design Donaldson McGraw Hill, New York
3 A Textbook of production P.C. Sharma S. Chand Publication
Engineering
COURSE INFORMATION SHEET
· Lean the concept of potential flow, viscous flow considering viscous forces
· Evaluate basic problems of compressible flow including normal shock and basics
of wind tunnel.
SYLLABUS
Note: There are 7 questions in total. First question is objective type covering the whole syllabus and is
compulsory. Attempt at least two questions from each PART A and PART B.
Part-A
1. FLUID STATICS: Brief History of Fluid Mechanics, Fluid & Their properties, Viscosity, Pressure
measurement, Basic equation of fluid statics, absolute and gauge pressures, Pressure measuring devices:
manometers, forces on submerged surfaces, stability of floating and submerged bodies.
3. FLUID DYNAMICS: Euler’s equation, Reynolds transport theorem, momentum and energy
equation, Bernoulli’s equation and its application: venturimeter, orifice, mouth pieces, weirs and
notches, linear momentum equation and its applications, moment of momentum equation, Dimensional
homogeneity, dimensionless parameters, similitude and model studies.
Part-B
4. VISCOUS FLOW: Equation of motion for laminar flow through pipes: Hagen Poiseuille formula,
Flow between parallel flat plates, couette flow, Plane Poiseuille flow, Flow through pipes, minor and
major losses, Transition from laminar to turbulent, Reynolds experiment, Eddy viscosity, Mixing length
concept and velocity distribution in turbulent flow.
RECOMMENDED BOOKS:
5 Fluid Mechanics and Its V. K. Gupta et.al. Wiley Eastern, New Delhi
Applications
COURSE INFORMATION SHEET
Practical List
3.To calibrate an orifice meter and study the variation of the coefficient of discharge
with the Reynolds number
4.To study the flow over V‐ notch ( weir) and Rectangular notch and to find their
coefficient of discharge.
8. To determine the head loss in a pipe line due to sudden expansion/ sudden contraction/ bend.
9. To determine the velocity distribution for pipeline flow with a pitot static probe.
Course Outcomes 1. Ability to design and analyze both permanent joints (riveted,
welded, etc.) and temporary joints (Bolts, keys, cotter,
knuckle)under concentric and eccentric loading conditions.
2. Ability to analyze and design keys, power transmission shafts
(carrying various elements like pulleys, gears etc) and couplings.
3. Ability to design and analyze power screws & screw jack.
4. Ability to design and analyze machine elements like flywheel ,
levers , pipes and pipe joints.
Syllabus
Note:- There are 7 questions in total. First question is objective type covering the whole
syllabus and is compulsory. Attempt at least two questions from each PART A and PART B.
Use of design data book is not allowed.
S.No Topics Lectures
PART-A
1 Introduction: 4
Scope and meaning of design with special reference to machine
design, design process, codes and standards, economic aspects
of design, safety aspects of design. Stress and strength, Design
factors and Factors of safety, Concept of tearing, bearing,
shearing, crushing, bending ,torsion ,deflection and stiffness.
Basic criteria of selection of
material, mechanical properties of materials,Failures resulting
from static loading, stress concentration, methods of avoiding
stress concentration, Introduction to fatigue in metals,
mechanism of fatigue failure, S-N diagram, endurance limit,
Fatigue strength, Endurance limit modifying factors ,Fatigue
stress concentration factor and notch sensitivity, characterizing
fluctuating stresses, Failure Loci under variable loading.
2 Design of fasteners: 6
Riveted Joints: Types of failures of riveted joints, strength and
efficiency of a riveted joint, design of butt and lap joints of a
boiler, design of Lozenge joint, design of eccentrically loaded
riveted joints.
Welded Joints: Types of welded joints, strength of a welded
joint, design of welded joints for various loading conditions
in torsion, shear or direct loads, design of eccentrically loaded
welded joints
Threaded Joints: Thread standards and definitions, Basic types
of screw fastening, Bolt strength,Statically loaded tension
joints-Preload, Design of eccentrically loaded bolted joints.
Design of spigot and socket cotter joint, gib and cotter joint
and knuckle joint.
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1 Machine Design P.C.Sharma&D.K.Aggarwal S.K.Kataria and Sons, New
Delhi
2 Machine Design: An Robert L. Norton Pearson Education
integrated Approach
3 Design of Machine Elements Bhandari Tata McGraw Hill, New
Delhi,
Course Information Sheet
Course Code MEC-502
Course Title COMPUTER AIDED DESIGN &
MANUFACTURING
Type of Course Core/Optional Core
LTP and Credits 3,0,0 and 3 credits
Course Assessment Methods
End semester Assessment (University Exam) 50 marks
Continuous Assessment (Sessional) 50 marks
Course Prerequisites Manufacturing Technology
Objectives and Outcomes
Course 1. To introduce the student to the basic concepts of computer-aided
Objectives(CO) design (CAD) and computer-aided manufacturing (CAM).
2. To expose the student to contemporary computer design tools
for mechanical engineers.
3. To prepare the student to be an effective user of a CAD/CAM
system.
Course Outcomes 1. Understand the role of CAD/CAM in modern design and
manufacturing.
2. Knowledge about the concept of Geometric modeling and
understanding of various geometrical transformations.
3. Knowledge about the representations and manipulations of
various curves, surfaces and solids.
4. Understand the concepts of the NC, CNC and DNC machines
and able to select the appropriate code for performing particular
tasks in these machines.
Syllabus
Note: - There are 7 questions in total. First question is objective type covering the whole
syllabus and is compulsory. Attempt at least two questions from each PART A and PART B.
S.No Topics Lectures
PART-A
1 Introduction: 4
2 Geometric Modeling: 6
Introduction & need of geometric modeling, types: wire frame, surface and
solid model, coordinate systems, Geometric Modeling techniques. Use of
geometric modeling.
3 Transformations: 5
4 Curves: 5
PART-B
5 Surfaces: 4
6 Solids: 5
7 NC words: 5
8 NC part programming: 6
Recommended books
Course Outcomes
1. Understanding of various geometrical transformations.
2. Representations and manipulations of various curves, surfaces
and solids.
3. Knowledge about the modelling of various mechanical parts in
CAD software.
4. Understanding the basic part programming and computer aided
part programming
Syllabus
1. Write code to generate a circle, an ellipse and a tabulated cylinder.
2. Implement simple programmes for the graphics representation of
a) Various transformation, ,
b) Cubic & splines curves/Surfaces.
3. CAD Modeling
1. Simple machine parts and components construction using Inventor/ pro E/
other 3D modeling package
2. Mechanical assembly of the parts.
4. Part programming using G and M codes and NC code generations.
Recommended books
Course 1. This course focuses on the design, modeling, fabrication, and control of miniature mobile
Objective robot and micro/nano-manipulation systems for graduate and upper level undergraduate
s(CO) : students.
2. It provides an overview of the state-of-the-art micro- and nanoscale sensors, actuators,
manipulators, energy sources, robot design, and control methods.
SYLLABUS Lectures
Note: There are 7 questions in total. First question is objective type covering the whole syllabus
and is compulsory. Attempt at least two questions from each PART A and PART B.
Part-A
1. Fundamentals of Robot
Robot degrees of freedom, robot parts: base, end effectors, drives, joints, classification,
characteristics and applications of Robots. (4)
2. Spatial Descriptions and Transformations
Robot kinematics, Inverse of transformation matrices, Conventions for affixing frames to
Links.
(6)
3. Inverse Manipulator Kinematics
Solvability, Algebraic versus Geometric solutions, reduction to polynomial solution,
Pieper’s solution, Examples of inverse manipulator kinematics.
4. Jacobians: Velocities and Static forces (6)
Differential relationships, Jacobians, Differential motions of a robot and its hand frame.
(6)
Part-B
5. Manipulator Dynamics
RECOMMENDED BOOKS
SYLLABUS Lectures
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Introduction to Robotics J. J. Craig Addison Wesley Publishing Co
COURSE INFORMATION SHEET
Note: There are 7 questions in total. First question is objective type covering the
whole syllabus and is compulsory. Attempt at least two questions from each PART A
and PART B.
Part-A
1. General Concept :
Need and classification of measurements and instruments: basic and auxiliary functional
elements of a measurement system; Mechanical vs. electrical/electronics instruments, primary, 2
secondary and working standards.
5
Range and span, accuracy and precision, calibration, hysteresis and dead zone, sensitivity and
linearity, threshold and resolution: speed of response, lag, fidelity and dynamic error, dead time
and dead zone.
Zero, first and second order systems and their response to step, ramp and sinusoidal input
signals
3. Error in measurements :
Sources of errors, systematic and random errors. Statistical analysis of test data. 3
4. Functional elements :
Part-B
5. Pressure and Flow Measurement:
Electromagnetic flow meters, ultra-sonic flow meters and hot wire anemometer: Flow
visualization techniques.
6. Temperature Measurement:
RECOMMENDED BOOKS
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Measurement System: Doebelin E.O McGrawHill Publishing
Application and Design Company.
SYLLABUS
Note: There are 7 questions in total. First question is objective type covering the whole syllabus and
is compulsory. Attempt at least two questions from each PART A and PART B.
PART A
1. Powder Metallurgy
Definition and classification , of metal powder, advantages and limitation, metal powder product,
method of producing powders, briquetting and sintering, hot iso-static Processing , sizing and
finishing operation. (4)
2. Gear Cutting
Introduction, Advantages and disadvantages, Types of gear, Forms of gear teeth, Gear teeth
terminology, Methods of making gears, gear manufacturing by casting, Template methods, Gear
shaper process, rack planning process, Hobbing process, Bevel gear cutting, Cutting worm and
worm wheel, gear finishing. (5)
PART-B
5. Die Design
Components of die design, design of die blocks, punches and strippers, methods of holding punches,
sketches of stock stops. Design procedure for progressive dies, compound dies and combination dies
for press tool operation, Forging die design for drop and machine forging parts(5)
7. Metal Finishing and Coating: Purpose of super finishing, surface roughness. Introduction
ofHoning, Lapping Polishing, Buffing and super-finishing. Metal Spraying. Metal Coating;
galvanizing, electro-plating and anodizing.(3)
8. Economics of metal machining & Multi edged tools: Element of machining cost,
toolingeconomics, machines economics and optimization. Broach tools-types materials and
applications, geometry of twist drills, thrust torque and power calculation in drills, form tools-
application.(4)
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Principles of Manufacturing Cambell. Tata McGraw Hill
Materials and Process
2 Tata McGraw Hill Chapman & IBM Publications:
Chapman
3 Manufacturing Process P.C. Sharma S. Chand Publication
COURSE INFORMATION SHEET
SYLLABUS
1. To study various processes of powder metallurgy
2. To study the different processes of gear manufacturing
3. To study the power press driving mechanism
4. To study the working principle of Jig and Fixture design
5. Explain the design procedure for progressive dies, compound dies and combinations dies.
6. To prepare a job by using the different types of molding
7. To study the different types of metal finishing processes.
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1 Principles of Manufacturing Cambell. Tata McGraw Hill
Materials and Process
2 Tata McGraw Hill Chapman & IBM Publications:
Chapman
3 Manufacturing Process P.C. Sharma S. Chand Publication
COURSE INFORMATION SHEET
SYLLABUS
Note: There are 7 questions in total. First question is objective type covering the whole syllabus and is
compulsory. Attempt at least two questions from each PART A and PART B.
Part-A
2. Impulse Turbine :
Description of Pelton impulse turbine, design of Pelton turbines such as number of jets, number
of buckets, depth and width of buckets, velocity diagrams, jet ratio, power and efficiency.
3. Reaction Turbines:
Description of Francis, Kaplan Turbines, velocity diagrams, speed ratio, flow ratio, degree of
reaction as applied to Kaplan and Francis turbines, cavitation. Governing of Turbines:
Description of oil pressure governor, double regulation of impulse and reaction turbines. Draft
Tube: Description, function and simple problems.
Part-B
4. Centrifugal Pumps:
Brief description and classification of Centrifugal pump (Radial flow, Axial flow, Mixed flow,
Single Stage Multistage). Priming and priming devices, Velocity triangles, work done, pressure
rise, various efficiencies, Minimum starting speed, impeller diameter.
Derivation of equations for Reynold, Froude Euler, Mach, and Weber numbers from ratio of
forces. Buckingham Theorem and its practical applications to turbines and pumps. Derivation of
various dimensionless, specific and unit quantities for turbines and pumps by application of
Buckingham theorem. Characteristics curves of turbine and pumps.
6. Reciprocating Pumps
Slip and coefficient of discharge, Effect of acceleration on pressure in suction and delivery
pipes, Air vessels (work saved by air vessel on suction and delivery pipe) Comparison with
centrifugal pumps.
RECOMMENDED BOOKS:
Practical List
3. To study the constructional features of reciprocating pump and to perform test on it for
determination of pump performance.
6. Determine the effect of vane shape and vane angle on the performance of centrifugal fan
th
MEC-557: VOCATIONAL TRAINING after 4 Semester
th
Each student shall attend 4 weeks training after 4 semester in Mechanical Industry,
National/International level technical institute/research organization.
Title Principle of Designing Credits --
Code CS 506 Semester: -5th LTP 003
Max. Elective Optional Course
Marks
Pre- Contact 45
requisites Hours
Time 3 Hours
Objectives 1. Conceptualisation and development of innovative, commercially important and socially
sound decisions related to engineering products, processes and systems.
2. To train students to translate academic developments in electronics, computational,
materials and energy engineering to real life applications of interest to industry for
accelerated start of career.
Note for The Semester question paper of a subject will be of 50 marks having 7 questions of equal
Examiner marks. First question, covering the whole syllabus and having questions of conceptual
nature, will be compulsory. Rest of the paper will be divided into two parts having three
questions each and the candidate is required to attempt at least two questions from each
part.
SECTION-A Hrs
Introduction to designing 7
Fundamentals of engineering designs and applications; social, economic, sustainability,
environmental and aesthetic rationales in design engineering, design decisions related to
competitiveness of products, processes, services and systems. Impact of product design on
business and market, product portfolio development through continuity in designing.
Technology road mapping, market and trend analyses for design decisions, managing
technology and innovations, protecting designs by intellectual property rights, IPR gap
analysis, creative thinking, technology sharing and transfer, founding start up companies,
raising seed funding, challenges of conceiving, creating and growing a new venture.
Design process 7
Principles, tools and strategies for conceptualising the need and presenting designs -
product specifications, digital tools, analog drawings, design modeling: mathematical
modeling, simulation using computers, and creation of 2D and 3D scale models.
Engineering fundamentals related to mechanical, electrical, electronic and computational
concepts in designing; environmental, sustainability, life cycle analysis, upstream
manufacturing economics and downstream assembly, distribution, recyclability, robustness,
maintenance and safety aspects in design development; functional prototypes, iterations,
validation of product concept, product development .
SECTION-B
Materials in Engineering Designs 8
Mechanical and structural properties of materials, application related needs, stress analysis
and fracture, heat transfer, conductivity, transparency, surface properties etc.
Nanomaterials, transparent ceramics, polymers, biocompatible materials, composites for
biomechanical applications. Case studies through examples and minor projects on
designing materials for dental restorative applications, energy harvesting technologies and
transparent ceramics.
Computational Designs 6
Theory and applications of computational design and manufacturing methods, use of tools
like, computer aided design, computer aided engineering, computer aided manufacturing,
Digital image capture and reconstruction, additive and subtractive manufacturing using
CAD CAM, milling and 3D approaches. Examples by case studies and minor projects for
designing prosthetics and orthosis.
Suggested
Books 1. Michael Luchs, Scott Swan, Abbie Griffin, 2015. Design Thinking. 405 pages, John Wiley & Sons,
Inc (ISBN 978-1-118-97180-2)
2. Geoffrey Boothroyd, Peter Dewhurst and Winston A Knight, 2011. Product Design for
Manufacture and Assembly. CRC Press.
3. Nigel Cross, 2008. Engineering Design Methods: Strategies for Product Design. Wiley & Sons
(ISBN 978-0-470-51926-4)
4. Richard G Budynas and J Keith Nisbett, 2010. Mechanical Engineering Design. . Mc Graw Hill
(ISBN 978-0-07-352928-8).
Course Outcomes
1. Ability to design and analyze different types of flexible drives
(belt drive, rope drive and chain drive) and rigid drives (spur
gear, helical gear, bevel gear and worm gear drive)
2. Acquaintance with the working of sliding and rolling contact
bearings & ability to design them.
3. Familiarity with different types of springs and spring
terminology &ability to design and analyze coil springs
(compression, tension, torsion)
4. Ability to design & analyze different types of clutches and
brakes I.C engine parts like piston, cylinder and connecting rod.
Syllabus
Note:- There are 7 questions in total. First question is objective type covering the whole
syllabus and is compulsory. Attempt at least two questions from each PART A and PART
B.
Use of design data book compiled by PSG college of Engg. & Tech., Coimbatore is
only allowed in Examination.
S.No Topics Lectures
PART-A
1 Introduction: 1
Types of mechanical drives and their applications. Factors
influencing the choice of a mechanical drive.
Course Outcomes 1. Understand the basic theory behind the finite element method.
2. Develop finite element formulations for 1-D, 2-D and axi-
symmetric elements and solve them after applying various
boundary conditions.
3. Understand the use of basic finite elements for structural
applications using truss, beam, frame and plate elements.
4. Knowledge about the use of finite element methods to solve
dynamic problems.
Syllabus
Note: - There are 7 questions in total. First question is objective type covering the whole
syllabus and is compulsory. Attempt at least two questions from each PART A and PART B.
S.No Topics Lectures
PART-A
1 Introduction: 6
PART-B
5 Static Analysis: 6
6 Dynamic Analysis: 5
Recommended books
S.NO. NAME AUTHOR(S) PUBLISHER
1 Introduction to Finite Chandrupatla and Prentice Hall of India ,2011
Elements in Engineering Belegundu
2 The Finite Element Method K. H. Huebner et al John Wiley & Sons, 2008
for Engineers
3 Finite Element Procedures Bathe Prentice Hall of India, 2006
4 Fundamentals of Finite David V Hutton McGraw-Hill, 2005
Element Analysis
Course Information Sheet
Course Code MEC-652
Course Title FINITE ELEMENT METHODS
Type of Course Core/Optional Core
LTP and Credits 0,0,2 and 1 credits
Course Assessment Methods
End semester Assessment (University Exam) Nil
Continuous Assessment (Sessional) 50 marks
Course Prerequisites Strength of Materials/Mechanics of
Materials
Objectives and Outcomes
Course The experiments aim at providing practical knowledge in finite
Objectives(CO) element methods and to solve practical engineering problem
using any FEM software.
Recommended books
Note: There are 7 questions in total. First question is objective type covering the whole syllabus
and is compulsory. Attempt at least two questions from each PART A and PART B
Part A
1. Fundamentals of Vibration 5
Free vibration, Forced vibration, Simple harmonic motion, Combination of two simple
harmonic motions, Fourier analysis, Fourier integral.
2. Single degree of freedom system-free vibration 5
Natural frequency, Equivalent systems, Energy method (average energy principle, principle of
conservation of energy, principle of virtual work, maximum energy principle), Response to an
initial disturbance, Phase plane method, Duhamel’s integral.
3. Single degree of freedom system-damped vibrations 3
Damping models (viscous damping, structural damping, and coulomb damping), Over-
damped case, critically damped case, under-damped system, Logarithmic decrement.
4. Single degree of freedom system-forced vibrations 5
Harmonic excitation, Mechanical impedance (analysis of system with structural damping,
analysis of system with elastically coupled viscous damper), System identification from
frequency response, Support motion (solution for absolute/relative motion of the
system, seismometer, accelerometer), Bending critical speeds of simple shafts,
Vibration isolation (viscous damper and elastically coupled viscous damper).
Part-B
5. Two degrees of freedom systems 4
Free vibration of spring coupled systems, Two degrees of freedom mass coupled systems,
Bending vibrations of two degrees of freedom systems, Forced vibration of an undamped two
degrees of freedom system, Undamped vibration absorbers, Vibration isolation.
6. Multi degree of freedom methods 6
Close coupled systems (eigen value problem upto four degree of freedom system using
Graeffe’s method), Far coupled systems, Orthogonality of mode shapes, Modal analysis
(Undamped analysis, damped systems), Forced vibration (modal analysis, forced vibration by
matrix inversion).
7. Numerical methods 4
Dunkerley’s lower bound approximation, Rayleigh’s upper bound approximation, Holzer
method (fixed-free systems, free-free systems, branched systems), Method of matrix iteration.
8. Continuous systems 6
Systems governed by wave equation (stretched string, axial vibrations of a bar, torsional
vibration of a circular rod), Free vibration of beams.
Books suggested:
1. Mechanical Vibrations : G K Grover, Nem Chand & Bros., Roorkee,1996.
SYLLABUS Lectures
Note : There are 7 questions in total. First question is objective type covering the whole
syllabus and is compulsory. Attempt at least two questions from each PART A and
PART–A
1 Basic Concepts
Difference between the subject of Heat Transfer and its parent subject 2 hrs
“THERMODYNAMICS”
Different methods of heat transfer – Conduction, Convection, and Radiation.
2. Conduction
Fourier’s law of heat conduction, coefficient of thermal conductivity, effect of
temperature and pressure on thermal conductivity of solids, liquids and gases and
its measurement. Definition and explanation of the term Thermal Diffusivity.
Three-dimensional most general conduction equation in rectangular, cylindrical and
spherical co-ordinates involving internal heat generation and under unsteady state
conditions. Derivation of equations for simple one dimensional steady state heat
conduction without heat generation from three-dimensional equations through walls,
cylinders and spherical shells (simple and composite).Electrical analogy of the heat
transfer phenomena in the cases discussed above. Equilent areas, shape factors.
Critical thickness of insulating layers on electric wire and pipes carrying hot fluids. 8
Influence of variable thermal conductivity on conduction through simple cases of wall,
cylinder and sphere.
System with Heat Sources: Internal generation cases along with some practical
cases of heat conduction, heat conduction through piston crown and case of nuclear
fuel rod with cladding. Introduction to unsteady heat transfer.
3. Extended Surfaces
Straight rod type of fins of uniform cross-section: (e.g. of circular and rectangular 8
cross-section). Circumferential fins of rectangular cross- section provided on the
circumference of a cylinder.
Fins effectiveness and fins efficiency for straight rod fins of rectangular and circular
cross-section. Application of fins in temperature measurement of flow through pipes
and determination of error in its measurement.
PART- B
5. Convection 3
Introduction, Processes, Newton’s law of cooling, theory of dimensional analysis as
applied to free and forced convective heat transfer. Analytical formulae of heat
transfer in laminar and turbulent flow, flow over vertical and horizontal tubes and
plates. Hydrodynamic and Thermal boundary layers over a flat plate, Blasius solution
for hydrodynamic and Thermal boundary layer (No. Derivation) 8
1. Heat Exchanger
Boiling, Boiling Regimes ,Bubble Growth and Nucleate Boiling, forced convection 3
boiling ,Theory accounting for the increased values of h.t.c. during nucleate phase of
boiling of liquids ; different phase of flow boiling (theory only).
Condensation and its classification, laminar filmwise condensation on a flat vertical
plate and its mathematical analysis, drop-wise condensation.
3. Radiation
Process of heat flow, definition of emmissivity, Absorptivity, reflectivity and
transmissivity .Concept of black and grey bodies, Plank’s law of monochromatic
radiation.Kirchoffs law and Stefan Boltzman’slaw ,Interchange factor, Lambert’s Cosine
and the geometric factor, Intensity of Radiation ,radiation density ,irradiation, 8 radiosity
and radiation shields.
Derivation formula for radiation exchange between two bodies using the definition of
radiosity and irradiation and its application to cases of radiation exchange between
three bodies, simplification of the formula for its application to simple bodies like
two parallel surfaces.
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Heat and Mass Transfer Incropera& Dewitt, John Willy & Sons.
Course I. Students will have the ability to calculate the experimental values of thermal
Outcome conductivity in case of conduction and will have a good knowledge of conduction
: related apparatus
II. Students will have the ability to calculate the experimental values of heat transfer
coefficient and overall heat transfer coefficient in case of convection and will have a
good knowledge of convection related apparatus
III. Students will have the ability to calculate the experimental values of Stefan
Boltzmann constant and emissivity of plates in case of radiation and will have a
good knowledge of radiation related apparatus
SYLLABUS Lectures
1. To study and compare temperature distribution, heat
transfer rate, overall heat
2. transfer in parallel flow and counter flow heat exchanger.
3. To study the parallel flow and counter flow heat
exchanger.
4. To find the thermal conductivity of metal rod
5. To determine heat transfer coefficient in natural
convection.
6. To determine heat transfer coefficient in forced
convection for air flowing in a tube.
7. To determine heat transfer coefficient in drop wise and
film wise condensation.
8. To determine the emissivity of a given plate at different
temperatures.
9. Evaluate the performance of a heat pipe.
10. To determine Overall Heat Transfer coefficient in Shell
and Tube heat exchanger.
11. To determine the Stefan Boltzmann’s constant in
radiation heat transfer process
COURSE INFORMATION SHEET
Note: There are 7 questions in total. First question is objective type covering the whole syllabus
and is compulsory. Attempt at least two questions from each PART A and PART B
PART-A
1. Structure of crystalline solids
Fundamental concepts of unit cell space lattice, Bravais space lattices, unit cells for
(6)
cubic structure & HCP, study of stacking of layers of atoms in cubic structure & HCP,
calculations of radius, Coordination Number and Atomic Packing Factor for different
cubic structures, Crystal directions and planes, Miller indices.
2. Crystal Imperfections
(3)
Point Imperfections, Line, Surface and volume imperfections- their types and
Significance.
3. Engineering Materials
(7)
Classification of materials; Types, properties and application of CI, Carbon Steels, Alloy
Steel, IS code for designation of steels, Stainless Steel, High Speed Steel- properties and
applications.
4. Phase Transformations (3)
Types of Phase transformation; Stages of phase transformation, Homogeneous
nucleation and heterogeneous nucleation, Crystal growth.
PART-B
5. Solid solutions, Phase diagrams:
Solid solutions, Types. Phase diagrams: Basic terms, phase rule, cooling curves,
(9)
construction of phase diagrams, interpretation of equilibriums diagrams, Types
of phase diagrams, Lever rule.
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Introduction to Material James F.Shackel ford Pearson,Prentice Hall,New
Science for Engineering Jersy,6th edition
.
nd
2 Physical Metallurgy V.Raghavan, PHI,New Delhi, 2 edition
Principles & Practices
Course 1. The students will able to apply core concepts in Materials Science to solve
Outcome engineering problems.
: 2. The students will able to design and conduct experiments and can analyze the
experimental data for research.
SYLLABUS
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Introduction to Material James F.Shackel ford Pearson, Prentice Hall, New
Science for Engineering Jersy,6th edition
.
nd
2. Physical Metallurgy V.Raghavan, PHI,New Delhi, 2 edition
Principles & Practices
Note: There are 7 questions in total. First question is objective type covering the whole syllabus
and is compulsory. Attempt at least two questions from each PART A and PART B
PART-A
1. Introduction: Classification, Advantages & limitations of non conventional machining,
HybridMachining, Ultrasonic machining (USM)-Principle of operation, process details,
applications and advantages, limitations of USM. (5)
2. Abrasive and Water Jet Machining: Basic principle, mechanism of material removal,
workingprinciple of Abrasive jet machining (AJM), water jet machining (WJM), merits & demerits,
application. (6)
3. Chemical Machining (CM): Working principle, process characteristics, procedures,
advantages& disadvantages of chemical machining. (6)
PART-B
4. Electrochemical Processes: Fundamentals, details of machining setup, materials and
selectionof tools, applications, Concept of others processes like ECG, Electrochemical deburring
etc. (7)
5. Thermal Metal Removal Processes: Working principles, Mechanism of material
removal,process parameters, advantages & limitations, applications of processes like electric
discharge machining(EDM), Electron Beam Machining (EBM), Ion beam machining (IBM), Plasma
arc machining (PAM), Laser beam machining(LBM).(9)
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Advanced Machining Processes V K Jain Allied
2 Non Convectional Machining Benedict McH
3 Non Convectional Machining M. Adhithan John Wiley
4 Non Convectional Machining,” P.K.Mishra Narosa
5 Modern machining process Shan &Pandey TMH
COURSE INFORMATION SHEET
1. 1. To study the various Non Conventional Manufacturing processes and compare with the
conventional manufacturing processes.
2. To study and perform the experiments of abrasive and water jet machining
3. To study the chemical machining
4. To study the working principle of electric discharge machine.
5. To explain the construction features of EDM.
6. To prepare a simple job on EDM
7. To study the laser beam machining and ion beam machining
8. To study the surface roughness of various materials
COURSE INFORMATION SHEET
Note: There are 7 questions in total. First question is objective type covering the whole syllabus
and is compulsory. Attempt at least two questions from each PART A and PART B.
PART – A
1. Basic Concept
Natural and Mechanical refrigeration; Application of Refrigeration; Units of refrigeration and
Coefficient of performance; Refrigeration effect, cooling capacity and COP of a refrigerator;
heating effect, heating capacity and COP as heat pump; Reversed Carnot cycle and its
limitations 4
PART-B
5. Refrigerants
Classification and nomenclature of refrigerants; Desirable thermodynamic, chemical and
physical properties of refrigerants; comparative study of commonly used refrigerants and their 4
fields of application; Azeotropes; Effect of moisture and oil miscibility; Refrigerants dying
agents and antifreeze solution; leak detection and charging of refrigerants;
environmental aspects of conventional refrigerants; Eco-friendly refrigerants and
action plan to reduce ecological hazards.
Note: There are 7 questions in total. First question is objective type covering the whole syllabus
and is compulsory. Attempt at least two questions from each PART A and PART B.
Part-A
1. Introduction
Introduction, Types of control systems, Open or closed loop systems, Analog or Digital
control systems, Regulators and servomechanism, Sequence control, typical block
diagram, Performance analysis.(4)
2. Representation of processes and control elements
Mathematical modeling, Block diagram representation, Representation of systems or
processes, Liquid, gas and thermal systems, Mechanical rotating systems, Geared
systems, Hydraulic servomotor, Electric motors, Control valve, Comparison elements,
Potentiometer-type comparator, Synchro-control transformer type error detector. (5)
3. Representation of feedback control systems
Block diagram and transfer function representation, Signal flow graphs, Mason’s
formula.(3)
4. Types of controllers
Types of control action, Proportional, Integral, Derivative, On-off, Hydraulic
controllers, Pneumatic controllers, Electronic controllers.(5)
Part-B
RECOMMENDED BOOKS
Note: There are 7 questions in total. First question is objective type covering the whole syllabus
and is compulsory. Attempt at least two questions from each PART A and PART B.
PART-A
1. Introduction
Components of automobile, basic structure, classification of automobile, body styles,
frame and frameless construction, power for propulsion, traction and tractive effort, relation 5
between engine revolution and vehicle speed, road performance curves, calculation of
equivalent weight, gear ratio for maximum acceleration.
2. Automobile Engine
Engine Types, Piston, Piston rings, valves, cooling system, lubrication system,
turbocharger, supercharger, fuel supply system for petrol and diesel engine, throttle body and 6
multi point fuel injection system , battery coil ignition system.
3. Clutches
Requirements of clutches, types of clutches, working of single plate, multiplate and 4
centrifugal clutch, clutch operation, clutch plate, fluid flywheel.
4. Transmission
Functions of transmission, necessity, types of transmission, sliding mesh,
constant mesh, synchromesh, selector mechanism, transfer box, automatic transmission, torque
converter, overdrive, propeller shaft, universal joint, final drive, differential, rear axle, 8
rear axle drive.
PART-B
5. Suspension 5
Basic classifications, types of suspension systems, leaf springs, shock absorbers,
independent suspension, types of front wheel, independent suspension system, air suspension.
8. Emission control
Automotive air pollution, emission control, crank case emission, evaporative 3
emission control, exhaust emission control, catalytic converter.
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Automotive Mechanics W.H.Crouse, D. L. Anglin Tata McGraw Hill
2 Automotive Engines. Dempsey, P.
3 Automotive Mechanics J. Heitner East West Press
4 Problems in Automobile N.K.Giri Khanna Publishers, Delhi
Mechanics
5 Automobile Engineering, Kripal Singh Standard Publication, Delhi
Vol. I & II.
COURSE INFORMATION SHEET
Note: There are 7 questions in total. First question is objective type covering the whole syllabus
and is compulsory. Attempt at least two questions from each PART A and PART B.
Part A
INTRODUCTION : Definition of Quality, Dimensions of Quality, Quality Planning, Quality costs-
Analysis Techniques for Quality Costs, Basic concepts of Total Quality Management, Historical
Review, Principles of TQM, Leadership – Concepts, Role of Senior Management, Quality Council,
Quality Statements, Strategic Planning, Deming Philosophy, Barriers to TQM Implementation.(6)
3. James R.Evans& William M.Lidsay, “The Management and Control of Quality”, (5th
Edition), South-Western (Thomson Learning), 2002
4. .Narayana V. and Sreenivasan, N.S. “Quality Management – Concepts and Tasks”, NewAge
International 1996.
COURSE INFORMATION SHEET
Books Suggested:
1. Dale H.Besterfiled, et al., “Total Quality Management”, Pearson Education, Inc. 2003.
Note: There are 7 questions in total. First question is objective type covering the whole syllabus
and is compulsory. Attempt at least two questions from each PART A and PART B.
PART-A
1. Steam Power Plant: - (a) Introductory: - Generation of electricity and sources of
energy, thermodynamic cycles, and selection of power plants on thermodynamic economical
and operating considerations. Future trends in power industry. Power sources of the future. 4
(b) Stem Generators: - Principle construction and operation of high pressure boilers.
Design trend in water tube boilers. Supercritical pressure systems. Steam generation for special
applications. Generator selection, maintenance and operation. Boiler furnaces. 4
(c) Feed Water heating and Steam Turbines: - Cycles with finite number of heaters,
analysis of optimum rise in ideal cycle efficiency. Types of heater arrangements, Equations for 3
single heater arrangement and series of heaters. Losses in various types of heater arrangements.
(d) Fuels and Firings: - How fuel burns? Types of fuel and their characteristics. Coal
handling and coal storage, methods of coal firing, stoker fired and pulverized fuel feeding
systems, pulverized and different types of stokers. Ash handling and ash disposal. Burning and 3
feeding of oil and gas. Selecting fuel for new plants. Combustion control.
(e) Water Treatment: - Quality of water needed by the plant. Types of impurities.
PH value, Clarification of water and filter designs. Water Treatment. DE aerators and aerators.
Handling and feeding chemicals. Feed water regulation. Condenser cooling water systems. 3
(f) Miscellaneous: -Construction and operation of economizers, air pre-heaters,
steam separators. Schematic layout of a modern coil oil fed steam power station. Heat balance
of steam power station. Steam station cost. Load curves. Site selection. 3
PART-B
3. Gas Turbine Power Plants: - Elements of gas turbine plants, principle and
performance of simple gas turbine plant, thermal refinement of gas turbine cycle. Combination
gas turbine cycles. Gas turbine cycle calculations. Economics of gas turbine plant compared
with steam power plant. 4
4. Nuclear Power Plants: - Atomic structure, energy levels, binding energy. Radio-activity,
decay laws, half-lives, nuclear reaction. The fission chain reaction (Controlled and
Uncontrolled). Maintenance of chain reaction, heat removal, reactor fuels and materials. Some
common types of power reactors. Pressurized water reactor, boiling water reactor and gas 4
cooled reactor. Reactor system safety provisions. Fusion reaction, site selection. Economics of
nuclear power plants. Air pollution. Power Plant and the air pollution. Units of radiation dose.
Control of internal and external hazards
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Power Plant Engineering T. Morse Van Nostrand Reinhold Inc.,U.S
2 Power Station Engineering Skrotzkiand. McGraw-Hill; 2nd edition
& Economy
SYLLABUS
1. Heat Balance of a boiler.
2. Heat Balance of a Steam Engine.
3. Heat Balance of a Steam Turbine.
4. Testing of a Steam Power Plant.
5. Heat balance of a Diesel Engine.
6. Testing of a Diesel Power Plant.
COURSE INFORMATION SHEET
Note: There are 7 questions in total. First question is objective type covering the
whole syllabus and is compulsory. Attempt at least two questions from each PART A
and PART B.
PART – A
3. Isentropic Flow:-
Introduction, Acoustic velocity. Mach number, Mach line and mach angle. 4
Classification of flows, Kerman’s rules of supersonic flow, flow parameter, critical condition
stagnation values
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Thermodynamics of Com. Shapiro John Wiley & Sons
Fluid flow
COURSE INFORMATION SHEET
1. To Study the different methods of measuring the flow in case of Compressible flows.
(i) Pressure
(ii) Velocity
(iii) Temperature
(iv) Density
(v) Flow direction
2. To study different methods of dynamic flow measurement techniques.
3. Study of low speed wind tunnel.
4. To study to make tunnel and visualize flow around different bodies shapes.
5. To determine the pressure and velocity variation along the length of a diffuser.
6. To study the formation of a wave phenomenon with the help of a water table.
7. Study of shock tube.
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Thermodynamics of Com. Shapiro John Wiley & Sons
Fluid flow
COURSE INFORMATION SHEET
Note: There are 7 questions in total. First question is objective type covering the whole syllabus and is
compulsory. Attempt at least two questions from each PART A and PART B.
Part A
Measurement and Prediction of Solar Radiation; Instruments for solar radiation; Characteristics of
solar spectra including Wave length Distribution; Radiation Properties and spectral Characteristics
Materials; Selective Surfaces & Basis of solar Collectors.
3. Solar Thermal system: - (5)
Solar Collection Devices; their analysis; Solar Collector Characteristics; solar Pond; application of
solar energy to space heating etc.
4. Biomass: (2)
5. Biogas: (4)
Principles of Bioconversion; Types of Bioreactors – Batch, Continuous, Plug-flow, Stirred Sewage,
Industrial Wastes, Agriculture Wastes, Animal and Human Wastes; Landfill Refuse, Properties and
Uses of Biogas.
Part B
6. Biofuels (4)
Bioconversion Techniques- Direct Combustion, Pyrolysis, Flash Pyrolysis Fermentation and
gasification; Utilization of Industrial Wastes such as Bagasse; Combustion systems; Gasification;
Sizing: Beneficiation of Fuels, Thermodynamics & Kinematics of gasification; Types of Gasifiers-
Downdraft, Updraft, Cross flow, fluidized. Combustion Characteristics of Biofuels; Utilization in
Conventional Engines and Power Generation including Cogeneration.
8. Tides :- Origin & Nature of Tides, Tidal Heads & Duration; Principles of Tidal Energy, Conversion,
Site Selection – Single & Multiple Bay System; Cycles & Load Factors; Regulation and Control of Tidal
Power Generations. (2)
Temperature & Tropical oceans: Principles of OTEC Systems; Site Selection; Power Cycles; Selection
of Working Fluids; Pumps & Turbines; Heat Exchanger Criteria; Biofueling; Secondary Applications
such as Fresh Water Production; Maniculture, etc; Power Transmission & System Efficiency.
Nature of Geothermal Resources; Location & Potential Assessment; Classification & Characteristics of
Geothermal Resources- Hot Rock, Hot Water& Steam, Chemical& Physical Properties of Geothermal
Brines: Control of scale Deposition, Drilling, Logging& Cycles; Refrigeration, Operation for
Geothermal Wells; principles of power production System & Cycles; Refrigeration, Two-phase Flow
Turbines; Thermal Phase Flow Turbines; Thermal Utilization & Mineral Recovery; Ecological & Safety
Consideration.
RECOMMENDED BOOKS
Storage
2 Solar energy : Fundamentals H.P. Garg and Jai Parkash Tata McGraw Hill, New Delhi
and application
Course Prerequisites :
Practical List
4. Study of Solar Collectors, Solar Cookers, Solar Stills, Solar Concentrators, and Solar
Converter/ Gasifier.
COURSE INFORMATION SHEET
Note: There are 7 questions in total. First question is objective type covering the whole syllabus
and is compulsory. Attempt at least two questions from each PART A and PART B
Part A
1. Introduction – Review of Elementary Mechanics of Materials, Methods of Analysis,
Stress-Strain Relationships, Failure and Limit on Design. (3)
Part B
5. Applications of Energy Methods – Principle of Stationary Potential
Energy,Castigliano's Theorem on Deflections, Castigliano's Theorem on Deflections
for Linear Load-Deflection Relationships, Deflections of Statically Determinate
Structures, Statically Indeterminate Structures. (4)
(5)
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
Course
Objective
Course
Outcome
:
SYLLABUS Lectures
Note: There are 7 questions in total. First question is objective type covering the whole syllabus
and is compulsory. Attempt at least two questions from each PART A and PART B.
PART – A
1. Methods Engineering: - Introduction to methods engineering, history in general definition,
objects. (2)
General procedure for method study, formulation of the problem, analysis of problem and use
of aids like flow diagram, procedure diagram, operation process chart, multiple activity chart, (10)
trip frequency chart and diagram, left hand and right hand charge, principles of motion
economy.
Search for alternatives including principles of motion economy and other aids to be used in
search phase. Evaluation of alternatives. (3)
Implementation, follow up and feedback, resistance to charge and acceptance of new Solution.
Special problem-complete investigation of the problem from motion study point of view. (3)
PART -B
2. Work Measurement: - Introduction to work measurement, work measurement equipment
and procedure. Various methods of reading stop watches, operator’s performance, various (4)
rating methods.
Relation between observed time, normal time and standard time. Calculation of Standard time (4)
for various problems.
work sampling plan. Pre-determined time systems: work factor, M.T.M System. Synthesis of (5)
elemental time application.
4. Wage and Wage Incentives: - Wages and wage incentives, types of incentives, (5)
requirements of good incentive schemes, wage-incentives schemes, group incentives.
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Methods Engineering Barns Mc-Graw Hills, N. York
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Methods Engineering Barns Mc-Graw Hills, N. York
SYLLABUS Lectures
Note: There are 7 questions in total. First question is objective type covering the whole syllabus
and is compulsory. Attempt at least two questions from each PART A and PART B.
Part-A
1 Introduction: Type of Material Failure, Design and Material Selection, Technological
Challenge, Economic Importance of Fracture.
(2)
(3)
3 Survey of Engineering Materials: Alloying and Processing of Metals, Irons and Steels,
Nonferrous Metals, Polymers, Ceramics and Glasses, Composite Materials, Material
Selection for Engineering Components.
(4)
Part-B (3)
5. Stress Strain Relationships and Behavior: Models for Deformation Behavior, Elastic
Deformation, Anisotropic Materials.
6. Review of Complex and Principal States of Stress and Strain: Plane Stress, Principal (4)
Stresses, Max. Shear Stress, 3D State of Stress, Stresses on Octahedral Planes, Complex State
of Strain.
(4)
7. Yielding and Fracture under Combined Stresses: General Form of Failure Criteria,
Max. Normal Stress Criteria Max. Shear Stress Criteria, Octahedral Shear Stress Criteria,
Coulomb-Mohr Criteria.
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Mechanical Behavior of Norman Dowling Pearson Publishers
Materials (3E)
2 Mechanical Behavior of Andre Meyers Cambridge University Press
Materials (2e)
3 Mechanical Behavior of Bowman John Wiley & Sons
Materials
4 Mechanical Behavior of Courtney Waveland Publishers
Materials
COURSE INFORMATION SHEET
SYLLABUS
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Mechanical Behavior of Norman Dowling Pearson Publishers
Materials (3E)
2 Mechanical Behavior of Andre Meyers Cambridge University Press
Materials (2e)
3 Mechanical Behavior of Bowman John Wiley & Sons
Materials
4 Mechanical Behavior of Courtney Waveland Publishers
Materials
Course code MEC705(g)
Course title Vehicle Dynamics
Type of course Elective
LTP and credits 3-1-0 and 4
End sem exam 50 marks
Continous assessment 50 marks
Pre-requisite Theory of machines I & II
Course Objective · Provide an introduction to multi-body dynamics.
· Enable students to model and analyse the stability and
dynamics of ground vehicles.
Course Outcome At the end of the course the student would be able to
1. Create a analytical model of a ground vehicle.
2. Solve the mathematical model of the vehicle and find
time response of the vehicle.
3. Perform vehicle dynamics simulation so as to determine
stability of a vehicle.
Syllabus:
1. Introduction:
Overview, What is Vehicle Dynamics? , Classical methods, Analytical process, Computational
methods, Computer based tools, Commercial computer packages, Benchmarking exercises.
2. Kinematics and Dynamics of Rigid Bodies:
Introduction, Theory of Vectors, Geometry analysis, Velocity analysis, Acceleration analysis, Static
force and moment definition, Dynamics of a particle, Linear momentum of a rigid body, Angular
momentum, Moments of inertia, Parallel axes theorem, Principal axes, Equations of motion.
3. One-Dimensional Vehicle Dynamics:
Forward Vehicle Dynamics, Parked Car on a level Road, Parked Car on an Inclined Road,
Accelerating Car on a Level Road , Accelerating Car on an Inclined Road, Parked Car on a Banked
Road, Optimal Drive and Brake Force Distribution, Vehicles on a Crest and Dip.
4. Driveline Dynamics:
Engine Dynamics, Driveline and Efficiency, Gearbox and clutch Dynamics, Gearbox Design,
Geometric Ratio Gearbox Design, Progressive Ratio Gearbox Design.
5. Applied Vehicle Kinematics:
Rotation About Global Cartesian Axes, Successive Rotation About Global Cartesian Axes, Rotation
About Local Cartesian Axes, Successive Rotation About Local Cartesian Axes, Euler Angles, General
Transformation, Angular Velocity, Time Derivative and Coordinate Frames, Rigid Body Velocity,
Angular Acceleration, Rigid Body Acceleration, Axis-angle Rotation, Screw Motion
6. Applied Vehicle Dynamics
Force and Moment, Rigid Body Translational Dynamics, Rigid Body Rotational Dynamics, Mass
Moment of Inertia Matrix, Lagrange’s Form of Newton’s Equations of Motion, Lagrangian
Mechanics.
7. Vehicle Planar Dynamics
Vehicle Coordinate Frame, Rigid Vehicle Newton-Euler Dynamics, Force System Acting on a Rigid
Vehicle, Tire Force and Body Force Systems, Tire Lateral Force, Two-wheel Model and Body Force
Components, Two-wheel Rigid Vehicle Dynamics, Steady-State Turning, Linearized Model for a
Two-Wheel Vehicle, Time Response.
8. Vehicle Roll Dynamics
Vehicle Coordinate and DOF, Equations of Motion, Vehicle Force System, Tire and Body Force
Systems, Tire Lateral Force, Body Force Components on a Two-wheel Model, Two-wheel Rigid
Vehicle Dynamics, Steady-State Motion, Time Response.
Suggested Books:
1. Vehicle Dynamics, Theory and Application by Reza N Jazar, Springer, 2008.
2. Fundamentals of Vehicle Dynamics, Thomson D. Gillespie, Society of Automotive Engineers,
1992.
3. Vehicle Dynamics and Control, Rajesh Rajamani, Second Edition, Springer, 2012.
Course code MEC755(g)
Course title Vehicle Dynamics Practical
Type of course Elective
LTP and credits 0-0-2 and 1
End sem exam NA
Continous assessment 50 marks
Pre-requisite Theory of machines I & II
Course Objective · Provide an hands-on experience to students in simulating
dynamics of ground vehicles.
Course Outcome At the end of the course the student would be able to
1. Create a analytical model of a ground vehicle in MATLAB.
2. Solve the mathematical model of the vehicle and find
time response of the vehicle using MATLAB.
3. Perform vehicle dynamics simulation so as to determine
stability of a vehicle using MATLAB.
List of Experiments:
1. Perform numerical simulation in MATLAB, of forward vehicle dynamics.
2. Perform numerical simulation in MATLAB, of lateral vehicle dynamics.
3. Numerical simulation of high-speed turning of vehicle in MATLAB.
4. Stability analysis of a Vehicle while maneuvering in MATLAB.
5. Steering dynamic force analysis in MATLAB for a front wheel drive vehicle.
Course Information Sheet
Course Code MEC- 705(h)
Course Title MATERIALS DESIGN
Type of Course Optional
Core/Optional
LTP and Credits 3,0,0 and 3 credits
Course Assessment Methods
Continuous Assessment 50 marks
Course Prerequisites Mechanics of Materials, Materials and Heat Treatment
Objectives and Outcomes
Course 4. To introduce applications of composite materials
Objectives(CO) 5. To educate students about various material characterization
techniques
6. To familiarize students on the effects of using nano-materials in
composites
7. To educate students about the uses of modelling in micro and nano
scale characterization
Course 1. Evaluate the uses and applications of different types of materials
Outcomes and composites
2. Analyze and characterize variety of materials for different types of
applications
3. Model structures comprising of different types of materials
4. Learn various techniques for composite fabrication
Syllabus
Norman Pearson
1 Mechanical Behavior of Materials(3E) Dowling Publishers
John Wiley &
2 Mechanical Behavior of Materials Bowman Sons
Roesler,
Mechanical Behavior of Engineering Harders,
3 Materials Baeker Springer
MEC-756: MINOR PROJECT
LTP
004
TH
MEC-757: VOCATIONAL TRAINING AFTER 6 SEMESTER
COURSE INFORMATION SHEET
Note: There are 7 questions in total. First question is objective type covering the whole syllabus
and is compulsory. Attempt at least two questions from each PART A and PART B.
PART-A
1. Mechanical Actuation Systems: Introduction to mechatronics, Measurement
system, Control systems (open & closed), elements of closed loop system,
(3)
Mechanical systems, types of motion, kinematic chains, cams, gear trains, ratchet
and pawl, belt and chain drives, and bearings.
2. Pneumatic and Hydraulic Systems: Introduction to pneumatic and hydraulic
actuation systems, directional control valves, pressure control valves, cylinders, (5)
process control valves, rotary actuators.
3. Types of controllers: Proportional, integral, derivative, PID, Hydraulic and
Pneumatic controllers. (3)
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Mechatronics W Bolton Pearson Education
2 Microprocessors and Douglas V Hall Tata McGraw Hill
Interfacing
COURSE INFORMATION SHEET
Course 1. The students will be able to integrate mechanical, electronics, control and computer
Outcome engineering in the design of Mechatronics systems.
: 2. The students will be able to apply knowledge of basic mechatronics to construct
a simple mechatronic system and incorporate it in a mechanical device
SYLLABUS
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Mechatronics W Bolton Pearson Education
2 Microprocessors and Douglas V Hall Tata McGraw Hill
Interfacing
COURSE INFORMATION SHEET
Course Upon successful completion of this course, the student will be able to:
Outcome : (a) Understand scope, objectives, phases, models & limitations of operations
research.
(b) Understand the theoretical working of linear programming techniques like
graphical, simplex algorithm and dual simplex technique.
(c) Solve specialized linear programming problems like transportation and
assignment models & model a dynamic system as queuing model and
computation of its important performance measures.
(d) Solve network models using PERT and CPM techniques.
SYLLABUS
Note : There are 7 questions in total. First question is objective type covering the whole syllabus
and is compulsory. Attempt at least two questions from each PART A and PART B.
Part–A
2. Definition of Models
Classification of models, Construction of models, Approximation in O.R. models 2
3. Allocation Models
Analysis of industrial situations to find characteristics like key decision, objective possible alternatives
& restrictions – Three categories of allocations type situations to be considered. General
mathematical formulation for linear programming, feasible and optimal solutions. 4
4. Graphical and simplex techniques to solve linear models, Modification of minimization situations so
as to be solvable by simplex method. Duality and degeneracy in simplex method, application and
limitations of linear optimization models. 10
Part-B
5. Network Models
Transportation models, method of finding starting solution, Vogel’s approximation method to find
feasible models, Hungarian method to find optimal solution in assignment models. 5
6. Cyclic shortest route models, traveling salesman‘s problem and Branch and Bound method to
solve it. A cyclic short route models and their solutions. 4
RECOMMENDED BOOKS
Course At the end of the course, students will have the skills
Outcome :
1. To formulate a real-world problem as a mathematical model.
2. Solve case studies using various allocation and network models.
Practical List
Note: There are 7 questions in total. First question is objective type covering the whole syllabus
and is compulsory. Attempt at least two questions from each PART A and PART B.
PART-A
1. Introduction 5
History of CFD; Comparison of the three basic approaches in engineering problem
solving – Analytical History of CFD; Comparison of the three basic approaches in
engineering problem solving – Analytical History of CFD; Comparison of the three basic
approaches in engineering problem solving – Analytical
2. Conservation Laws and Equations:
Models of flow, Conservations laws of fluid motions: Mass conservation, 8
Momentum Equation, energy equations Navier-Stokes Equations; Difference between
conservative forms and non-conservative forms;
3. Partial Differential Equations PDE
Classifications of quasi linear PDE, impact on physical and computational fluid dynamics,
Physical Boundary Condition and well posed problems 5
PART-B
4. Discretization of PDE I:
Finite Difference Method: Representation of PDE by Forward, Rear and Central Difference
, Truncations Error, Difference Equations; Explicit and Implicit Approach:, Error and
Analysis of stability 10
5. Discretization of PDE II:
Finite volume Method: finite volume method for 1D, 2D,and 3D steady state diffusions
problems, Properties of Discretization schemes; Central Difference scheme, the upwind
Differencing Scheme Quadratic upwind differencing scheme (Quick). (8)
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Numerical Heat Transfer Suhas V. Patankar Taylor & Francis
and Fluid Flow
2 Computational Fluid J. Anderson Publisher McGraw Hill
Dynamics
3 Computational Fluid T. K., Wiley New York
Dynamics by Bose
4 Computational Fluid flow K. Muralidhar& T. Narosa Publications
and Heat Transfer Sundaranjan
COURSE INFORMATION SHEET
SYLLABUS Lectures
Note: There are 7 questions in total. First question is objective type covering the whole syllabus
and is compulsory. Attempt at least two questions from each PART A and PART B.
PART - A
1. Basic Elasticity: Laws of stress transformation, principle stress and principle and
principle planes, Cauchy’s stress quards.
2. Two Dimensional Photo elasticity: Stress optic law, optics of Polaris cope, plane and
circular Polaris copes, dark and light field arrangement, fringe multiplication, fringe sharp
ending, compensation techniques, commonly employed photo elastic materials. (3)
6. Brittle Coatings: introduction, coatings stresses and failure theories, different types
of crack patterns, crack detection. Composition of brittle coatings, coating cure, influence of
atmospheric condition, effect of biaxial stress field.
COURSE INFORMATION SHEET
SYLLABUS
SYLLABUS Lectures
Note: There are 7 questions in total. First question is objective type covering the whole syllabus
and is compulsory. Attempt at least two questions from each PART A and PART B.
PART - A
PART-B
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Engineering Metrology K.J. Hume Macdonald, 1963
RECOMMENDED BOOKS
SYLLABUS Lectures
Note: There are 7 questions in total. First question is objective type covering the whole syllabus
and is compulsory. Attempt at least two questions from each PART A and PART B.
PART-A
1. Importance of Material Handling:- Principles of material handling, analysis of
material handling problem, operation chart and flow process chart, flow diagrams. (3)
3. Factory Planning and Material Handling:- Plant location, factory handling, the
layout as key material, handling problems. (4)
5. Conveyors:- Belt carrier, chain and cable, roller, screw vibrating and reciprocating
pneumatic tubes, load transferring machines, air operated & Hydraulic devices(4)
PART-B
6. Cranes, Elevators and Hosits:-Fixed cranes and derricks, traveling cranes,
portablecrane elevators, hoist, winches cable ways. (3)
7. Industrial trucks, railways, cars, dump trucks, over head track age system. (3)
8. Pollets and Containers:- Enclosed tight, open top and platform coil
supports,strapping, industrial packing etc. (4)
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Construction equipment and Mahesh Verma Metropolitan Book Co., 1975
its planning and application
2 Big Machines Karen Wallace DK Pub., 2000
COURSE INFORMATION SHEET
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Construction equipment and Mahesh Verma Metropolitan Book Co., 1975
its planning and application
COURSE INFORMATION SHEET
SYLLABUS Lectures
Note: There are 7 questions in total. First question is objective type covering the whole syllabus
and is compulsory. Attempt at least two questions from each PART A and PART B.
PART-A
Friction and Lubrication: - Laws of dry sliding friction, characteristics of hydro
dynamicallylubricated surface Boundary region of lubrication, lubrication oil Vs grease oil
lubrication, selection and its application. Sealing devices. Greases, oils in greases including the
study of consistency, mechanical stability, bleeding and evaporation properties, synthetic grease,
grease selection, specification and application. 6
Sliding Bearings:- Types of journal bearings, wick- oiled bearings, pressure fed
bearings,externally pressurized bearings, types of thrust bearings, pivoted shoe bearings, spring 5
supported flexible plate thrust bearings, step thrust bearing, externally pressurized bearings,
pocket thrust bearings.
PART-B
Viscosity, effect of temp. and pressure on viscosity. The Hagen-poiseuillie Law, Petroff’s
equation, hydrodynamic bearings theory. Reynolds’s equation in two dimensions and limitation 9
of the theory. The plane slider bearings, load capacity, slider bearings, load capacity, slider
bearings friction, pivot-equation. The full journal bearings, load capacity, journal bearings
friction, non-dimensional charts and simple numerical.
Reynolds’s equation in three dimensions, effect of end flow on load factor, Kingsbury’s
electrical-analogy, leakage factor. Design aspects of simple journal bearings, multiple journal
Barings, pressure bearings and non-pressure bearings.
Rolling Bearing:- Elementary study of deep groove bearings, filling notch bearings, angular-
contact ball bearings, magneto bearings, self-aligning ball bearings, miniature ball bearings 6
double row ball bearings, duplex bearings, ball thrust bearings, tapered thrust bearings, needle
bearings, principle of operation, stribeck’s equation for load capacity.
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Bearings Design & D.F. Wilcock, and E.R. McGraw Hill Book Co., N. York.
Applications Booser,
2 Analysis and Lubrication of M.C. Shaw and Fred Mecks McGraw Hill Book Co., N. York.
Bearings
COURSE INFORMATION SHEET
Course The student will able to perform these experiments and can use for there for their
Outcome project work and for research work and in industry in future.
:
SYLLABUS
1. To find pressure distribution around a simple journal bearings under varying loads on
driven shaft.
2. Projects and case studies concerning the topics in theory.
RECOMMENDED BOOKS
Note: There are 7 questions in total. First question is objective type covering the whole syllabus
and is compulsory. Attempt at least two questions from each PART A and PART B
PART–A
PART-B
6. Common failures and defects in plastic materials:
Defects arising during moulding and extension. Mechanical, Chemical, Electrical
and thermal failures in plastic. (3)
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Plastic in Engineering J. Delmonta Plantar Publishing Co.
2 Plastic Moulding Locies F. Rahm McGraw Hill
3 Plastic MouldEngg. VoI I Laszlo Sons Pergaman press.
4 Plastics tooling and - American Society – Tool & Mfg.
machining handbook Engrs. 1965
5 Fundamental Tools of Hennery M. Rikardorn McGrawHill Book Co.
Plastics
6 Properties and Testing of A.E. lever and J. Rhys Temple PressLondon
Plastic Materials
COURSE INFORMATION SHEET
1. To perform the shear test on plastics and draw stress- strain curve.
2. To perform compression test on plastics.
3. To perform shear test on plastics.
4. To perform Bending test on plastics.
5. To perform Impact test on plastics.
6. To perform creep test at room temp on plastics.
7. To perform hardness test on plastics.
8. To perform torsion test on plastics.
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Plastic in Engineering J. Delmonta Plantar Publishing Co.
2 Plastic Moulding Locies F. Rahm McGraw Hill
3 Plastic MouldEngg. VoI I Laszlo Sons Pergaman press.
4 Plastics tooling and machining - American Society – Tool &
handbook Mfg. Engrs. 1965
5 Fundamental Tools of Plastics Hennery M. McGrawHill Book Co.
Rikardorn
6 Properties and Testing of Plastic A.E. lever and J. Temple PressLondon
Materials Rhys
COURSE INFORMATION SHEET
SYLLABUS Lectures
Note: There are 7 questions in total. First question is objective type covering the whole
syllabus and is compulsory. Attempt at least two questions from each PART A and PART
B
PART –A
PART- B (8)
3. Three dimensional problems in turbo machinery and its two dimensional solutions.
(8)
4. Influence of fluid friction in turbo machinery and limitations of present theory of turbo
machinery.
5. Hydrodynamic theory of cavitations in turbo machinery.
RECOMMENDED BOOKS
SYLLABUS
More detailed experiments of hydraulic machines (Pelton, Francis, Kaplan and Centrifugal
Pumps) – Drawing Mushhel curves in above cases.
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Fluid Mechanics of turbo G.F. Wisloconus. McGraw-Hill
machineryVoI. 1
COURSE INFORMATION SHEET
Note: There are 7 questions in total. First question is objective type covering the whole syllabus
and is compulsory. Attempt at least two questions from each PART A and PART B.
PART-A
1. Introduction
Production and Operations functions, scope and objectives, role of operation management
in productive systems, Manufacturing Vs Service operations, meeting global challenges. (4)
2. Product and process Design
Need, characteristics of phases of product life cycle, Product Development process, product
designvs process design, classification of a production process. Methodology for process (4)
design.
3. Capacity planning
Definition and basic concepts, Long term and short term capacity strategies, Aggregate
planning - strategies and guidelines, capacity planning models and linear programming (4)
PART-B
5. Demand forecasting
Introduction, forecasting methods, time series components, forecasting errors and
economics of forecasting. (4)
6. Operation scheduling
Scheduling concept and its need, factors effecting scheduling, Job Shop scheduling,
sequencing, batch scheduling, (4)
7. Inventory control
Introduction and need of the inventory control, various inventory costs, basic EOQ model,
selective inventory controls-ABC, FSN, VED. Fixed order quantity and fixed order interval (6)
system. Material requirement planning.
8. Quality Management
Concept of Quality, quality cost, inspection, type of inspection, statistical quality control, (5)
control charts, concept of TQM & ISO Certification.
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Production and operation Adam EE, RJ Ebert Prentice Hall
management
2 Production and operation James Dilworth McGraw Hill
management
3 Production and operation SN Chary Tata McGraw Hill
management
COURSE INFORMATION SHEET
Course 1. The students will be able to communicate effectively with each other and become
Outcome capable to work in a team.
: 2. The students will be able to share their views, innovative ideas etc.
3. To improve the group discussion skills among the students.
SYLLABUS
The students are required to presents seminars on various advance topics relating to the subject.
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Production and operation Adam EE, RJ Ebert Prentice Hall
management
2 Production and operation James Dilworth McGraw Hill
management
3 Production and operation SN Chary Tata McGraw Hill
management
COURSE INFORMATION SHEET
Note: There are 7 questions in total. First question is objective type covering the whole syllabus
and is compulsory. Attempt at least two questions from each PART A and PART B.
PART – A
. Basic Elasticity: Three dimensional stress and strain systems. Principal stresses,
rincipal strains and principal planes. Mohr’s circle for 3 – dimensional stress and strain systems. 3
2. Two dimensional Elasticity: - Stress functions, plane stress and plane strain methods.
4
3. Torsion: - Torsion of circular and elliptical bars – elastic analysis.
4
4. Introduction to Plasticity : - Idealized stress-strain systems, approximate equation for stress
strain curves (Ramberg-Osgood, Ludwig,s and karunes equation), Bauschinger effect-yield locus, yield 5
surface.
PART - B
5. Yield Criteria and Flow Rules: - Tresca theory & Von-Mises yield criterion, their
geometrical representation, experimental evidence for the criteria. 6
6. Slip Line Yield Theory: - Two Dimensional plasticity, slip lines, basic equations, Hencky’s
first theorem, Geiringer’s Velocity equation. Applications of slip line field theory to plane strain 6
problems.
7. Load Bounding: - The lower bound theorem, the upper bound theorem and their
corollaries. Applications of load bounding to plane strain problems. 6
COURSE INFORMATION SHEET
2 Plasticity for Engineers: Johnson & Mellor Ellis Horwood Limited, 1983
3 Fundamentals of Theory of L.M. Kachanov Courier Dover Publications, 2003
Plasticity:
4 Elasticity in Engineering: Ernest E. Sechler, Dover Publications Inc., 1968
RECOMMENDED BOOKS
2 Plasticity for Engineers: Johnson & Mellor Ellis Horwood Limited, 1983
3 Fundamentals of Theory of L.M. Kachanov Courier Dover Publications, 2003
Plasticity:
4 Elasticity in Engineering: Ernest E. Sechler, Dover Publications Inc., 1968
SYLLABUS Lectures
Note: There are 7 questions in total. First question is objective type covering the whole syllabus
and is compulsory. Attempt at least two questions from each PART A and PART B.
Part A
1. Bending of Straight Beams – Fundamentals of Beam Bending, Bending Stresses in
Beams subjected to Non-Symmetrical Bending, Deflection of Straight Beams
4
Subjected to Non-Symmetrical Bending, Effect of Inclined Loads, Fully Plastic Load for Non-
Symmetrical Bending.
2. Shear Center for Thin-Wall Beam Cross Sections – Approximations for Shear in
Thin-Wall Beam Cross Sections, Shear Flow in Thin-Wall Beam Cross Sections, Shear 3
Center for a Channel Section, Shear Center of Composite Beams Formed from Stringers
and Thin Webs, Shear Center of Box Beams.
Part B
6. Stress Concentrations – Nature of a Stress Concentration Problem and Stress
Concentration Factor, Stress Concentration Factors: Theory of Elasticity, Stress
Concentration Factors: Combined Loads, Stress Concentration Factors: Experimental
Techniques, Effective Stress Concentration Factors, Effective Stress Concentration
Factors: Inelastic Strains. 4
7. Fracture Mechanics – Failure Criteria and Fracture, Stationary Crack, Crack
Propagation and Stress Intensity Factor, Fracture: Other Factors. 3
9. Creep: Time Dependent Deformation – Definition of Creep and Creep Curve, The
Tension Creep Test for Metals, One-Dimensional Creep Formulas for Metals Subjected 4
to Contact Stress and Elevated Temperature, One-Dimensional Creep of Metals Subjected
to Variable Stress and Temperature, Creep under Multiaxial States of Stress, Flow Rule
for Creep of Metals Subjected to Multiaxial State of Stress, Creep in Nonmetals.
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
SYLLABUS
1. Deformation of Straight Beams
2. Deformation of Curved Beams
3. Unsymmetrical Bending
4. Stress and Strain in Thick Cylinder (Strain Gauge)
5. Photoelasticity Demonstration
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Advanced Strength and Ansel C. Ugural and McGraw Hill
Applied Stress Analysis, 2/e Saul K. Fenster,
SYLLABUS Lectures
Note: There are 7 questions in total. First question is objective type covering the whole syllabus
and is compulsory. Attempt at least two questions from each PART A and PART B.
PART-A
Selection of materials: Service requirement, Structure-Property correlations and reappraisal of
the role of crystal structure and structural defects on properties. (4)
Material Characterization:- Stereographic Projections, X-ray diffraction, crystal structure and
phase identification, residual stress measurement and other applications. (3)
Thermal Analysis Techniques: Outline of thermal analysis, technique, description of
(5)
DTA/DSC/TGA techniques and instrumentation, applications, and case studies
Optical microscopy: light optics, microscope components, possibilities, and limitations.
(2)
Scanning Electron Microscopy : Optics and performance of a SEM, Image interpretation,
(2)
crystallographic information in a SEM, analytical microscopy
Scanning Tunneling Microscopy: Construction and operation, Image interpretation
(2)
Transmission Electron Microscopy: Construction and operation of a TEM,
ElectronDiffraction and image interpretation. (2)
PART-B
Synthetic materials: Classifications and structure of polymers, class transition
temperature,mechanical properties of polymers. Artificial and synthetic materials. (5)
Nano materials: Classification, the structure, methods of their production, their properties and
their sphere of applications.
(3)
Smart materials: Shape Memory Alloys, Varistors and Intelligent materials for bio-
medicaluses including poly-acrylates, ABS plastics, polvmatha acrylates, nylon and teflon.
(6)
Applications and development of these materials.
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Callister’s Materials William D. Callister, Jr., Wiley India Pvt. Ltd.
Science and Engineering
2 Engineering Material James A. Jacobs & Thomas Prentice Hall.
Technology F. Kilduff.
3 Foundations of Materials William F. Smith. McGraw Hill.
Science and Engineering
4 Materials characterization Sam Zhang; L Li; Ashok Boca Raton, CRC Press
techniques Kumar,
COURSE INFORMATION SHEET
Course The student will able to use these equipments for there for their project work and for
Outcome research work and in industry in future.
:
SYLLABUS
Study of experiments related to SEM/TEM/XRD/IR Lab facilities
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Callister’s Materials William D. Callister, Jr., Wiley India Pvt. Ltd.
Science and Engineering
2. Materials characterization Sam Zhang; L Li; Ashok Boca Raton, CRC Press
techniques Kumar,
COURSE INFORMATION SHEET
SYLLABUS Lectures
Note: There are 7 questions in total. First question is objective type covering the whole syllabus
and is compulsory. Attempt at least two questions from each PART A and PART B.
Part-A
1 Fracture of Cracked Members: Application of K to Design and Analysis, Fracture
Toughness, Plastic Zone Size, Fracture Toughness Testing, Fracture Mechanics Beyond (3)
Linear Elasticity.
2 Fatigue of Materials (Stress Based Approach): Cyclic Loading, Fatigue Testing, Physical
Nature of Fatigue Damage, S-N Curves, Mean Stresses, Multi-axial Stresses, Variable (3)
Amplitude Loading.
3 Fatigue of Materials of Notched Members (Stress Based Approach): Notch Effects, (3)
Notch Sensitivity, Notch Effects for - Long, Intermediate, and Short Lives, Combined
Effects of Notches and Mean Stress, Designing to Avoid Fatigue Failure.
(3)
4 Fatigue Crack Growth: Testing of Fatigue Crack Growth, Effect of Smin/Smaxon Crack
Growth, Life Estimates for Constant and Variable Amplitude Loading, Design
Considerations, Plasticity Aspects, Environmental Crack Growth.
Part-B
5. Plastic Deformation and Models for Materials: Stress-Strain Curves, 3D Stress- (3)
Strain Relationships, Unloading and Cyclic Loading Behavior from Rheological Models,
Cyclic Stress-Strain Behavior for Real Materials.
(3)
6. Stress-Strain Analysis of Plastically Deforming Members: Plasticity in Bending,
Residual Stresses and Strains for Bending, Plasticity of Circular Shafts in Torsion, Notched
Members, Cyclic Loding. (3)
7. Fatigue of Materials (Strain Based Approach): Strain-N Curves, Mean and Multi-
axial Stress Effects, Life Estimates for Structural Components
8. Creep and Damping: Creep Testing, Physical Mechanism for Creep, Time- (3)
Temperature Parameters and Life Estimates, Creep Failure under Varying Stress, Stress-Strain-
Time Relationships, Creep Deformation under Varying Stress, Creep under Multi-axial Stress,
Component Stress-Strain Analysis, Energy Dissipation.
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Mechanical Behavior of Norman Dowling Pearson Publishers
Materials (3E)
2 Mechanical Behavior of Andre Meyers Cambridge University Press
Materials (2e)
3 Mechanical Behavior of Bowman John Wiley & Sons
Materials
4 Mechanical Behavior of Courtney Waveland Publishers
Materials
COURSE INFORMATION SHEET
SYLLABUS
RECOMMENDED BOOKS
NAME AUTHOR(S) PUBLISHER
1. Mechanical Behavior of Norman Dowling Pearson Publishers
Materials (3E)
2 Mechanical Behavior of Andre Meyers Cambridge University Press
Materials (2e)
3 Mechanical Behavior of Bowman John Wiley & Sons
Materials
4 Mechanical Behavior of Courtney Waveland Publishers
Materials
Course code MEC804(I)
Course title Rotor Dynamics
Type of course Elective
LTP and credits 3-1-0 and 0
End sem exam 50 marks
Continous assessment 50 marks
Pre-requisite Theory of machines I & II
Course Objective · Provide an introduction to dynamics of rotating
machinery.
· Enable students to model and analyze the stability and
dynamics of rotors.
Course Outcome At the end of the course the student would be able to
6. Create an analytical model of a rotor.
7. Solve the mathematical model of the lateral dynamics of a
rotor and find modes, modal shapes and time response.
8. Perform complete rotor dynamics simulation so as to
determine stability of a rotor bearing system.
Syllabus:
1. Introduction
Linear rotor-dynamics, Equation of motion, Rotating systems, Complex coordinates, Free
vibration, Forced response, Nonlinear rotor-dynamics, Non-stationary rotor-dynamics, Time
domain versus frequency domain.
2. Jeffcott rotor
Undamped Jeffcott rotor, Complex coordinates in rotordynamics, Jeffcott rotor with shaft bow,
Jeffcott rotor with viscous damping, Jeffcott rotor with structural damping, Jeffcott rotor with
non-synchronous damping, Effect of the compliance of the bearings, Rotating coordinates,
Stability in the supercritical field, Drag torque at constant speed.
Books:
2. Rotor Dynamics: Modeling and Analysis, M.I. Friswell, J.E.T. Penny, S.D. Garvey and A.W.
Lees, Cambridge University Press, Cambridge, 2010
List of Experiments:
1. Plot of Campbell diagram for a Jeffcott rotor using MATLAB.
2. Eigen value analysis of rotor with gyroscopic effects using MATLAB.
3. Evaluating time response of rotor subjected to unbalance using MATLAB.
4. FFT plot of the time series data using MATLAB.
5. Response of asymmetric rotors using MATLAB.
Course Information Sheet
Course Code MEC 804(m)
Course Outcomes After the successful completion of this course students will be able to