Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 46 views

    Repot From Robot

    Uploaded by

    GEMPF
    This document provides details on the design of a spread footing foundation, including geometry, materials, loads, analysis, and reinforcement requirements. The foundation is designed for a maximum load of 2720 kN with a bending moment of 1680 kNm. Analysis shows the shear stress is below the allowable limit. The minimum required longitudinal reinforcement is 14.41 cm2/m. Drawings specify the placement of rebar grades 420 #10 through #22 along the bottom, top, and piers. A material survey estimates a concrete volume of 11.12 m3 and steel weight of 755.77 kg for the design.

    Copyright:

    © All Rights Reserved
    Download as RTF, PDF, TXT or read online from Scribd

    Repot From Robot

    Uploaded by

    GEMPF
    46 views5 pages
    This document provides details on the design of a spread footing foundation, including geometry, materials, loads, analysis, and reinforcement requirements. The foundation is designed for a maximum load of 2720 kN with a bending moment of 1680 kNm. Analysis shows the shear stress is below the allowable limit. The minimum required longitudinal reinforcement is 14.41 cm2/m. Drawings specify the placement of rebar grades 420 #10 through #22 along the bottom, top, and piers. A material survey estimates a concrete volume of 11.12 m3 and steel weight of 755.77 kg for the design.

    Original Description:

    LOL

    Copyright

    © © All Rights Reserved

    Available Formats

    RTF, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides details on the design of a spread footing foundation, including geometry, materials, loads, analysis, and reinforcement requirements. The foundation is designed for a maximum load of 2720 kN with a bending moment of 1680 kNm. Analysis shows the shear stress is below the allowable limit. The minimum required longitudinal reinforcement is 14.41 cm2/m. Drawings specify the placement of rebar grades 420 #10 through #22 along the bottom, top, and piers. A material survey estimates a concrete volume of 11.12 m3 and steel weight of 755.77 kg for the design.

    Copyright:

    © All Rights Reserved
    Download as RTF, PDF, TXT or read online from Scribd
    Download as rtf, pdf, or txt
    46 views5 pages

    Repot From Robot

    Uploaded by

    GEMPF
    This document provides details on the design of a spread footing foundation, including geometry, materials, loads, analysis, and reinforcement requirements. The foundation is designed for a maximum load of 2720 kN with a bending moment of 1680 kNm. Analysis shows the shear stress is below the allowable limit. The minimum required longitudinal reinforcement is 14.41 cm2/m. Drawings specify the placement of rebar grades 420 #10 through #22 along the bottom, top, and piers. A material survey estimates a concrete volume of 11.12 m3 and steel weight of 755.77 kg for the design.

    Copyright:

    © All Rights Reserved
    Download as RTF, PDF, TXT or read online from Scribd
    Download as rtf, pdf, or txt
    You are on page 1of 5

    1 Spread footing: Foundation1 Number: 1

    1.1 Basic data

    1.1.1 Assumptions

    ·0 Geotechnic calculations according to : ACI


    ·1 Concrete calculations according to : ACI 318-11
    ·2 Shape selection : without limits

    1.1.2 Geometry:

    A = 7.60 (m) a1 = 0.40 (m) a2 = 0.40


    (m)
    B = 1.80 (m) b1 = 0.40 (m) b2 = 0.40
    (m)
    h1 = 0.81 (m) e2 = 6.00 (m)
    h2 = 0.00 (m) ex = 0.00 (m) ey = 0.00
    (m)
    h4 = 0.05 (m)

    a1' = 33.5 (cm) a2' = 33.5 (cm)


    b1' = 33.5 (cm) b2' = 33.5 (cm)

    c1 = 5.1 (cm)
    c2 = 5.1 (cm)

    1.1.3 Materials

    ·3 Concrete : CONCR_3.5; Characteristic strength =


    24.10 MPa
    Unit weight = 2407.31 (kG/m3)
    ·4 Longitudinal reinforcement : type Grade 420 Characteristic
    strength = 420.00 MPa
    ·5 Transversal reinforcement : type Grade 420 Characteristic
    strength = 420.00 MPa
    ·6 Additional reinforcement: : type Grade 420 Characteristic
    strength = 420.00 MPa

    1.1.4 Loads:

    Foundation loads:
    Case Nature Group Pier N Fx Fy Mx My
    (kN) (kN) (kN) (kN*m) (kN*m)
    DSGN1 design ---- 1 1080.00 0.00 0.00 0.00 0.00
    2 1640.00 0.00 0.00 0.00 0.00

    Backfill loads:
    Case Nature Q1
    (kN/m2)

    1.1.5 Combination list


    1/ ULS : DSGN1 N=2720.00 My=1680.00
    2/* ULS : DSGN1 N=2720.00 My=1680.00

    1.2 Geotechnical design

    1.2.1 Assumptions

    Foundation design for:


    • Capacity
    • Rotation
    ·7 Take account of plastic redistribution of allowable stresses

    1.2.2 Soil:

    Soil level: N1 = 0.00 (m)


    Column pier level: Na = 0.00 (m)
    Minimum reference level: Nf = -0.50 (m)

    well graded gravels


    • Soil level: 0.00 (m)
    • Unit weight:2242.58 (kG/m3)
    • Unit weight of solid: 2702.31 (kG/m3)
    • Internal friction angle: 42.0 (Deg)
    • Cohesion: 0.00 (MPa)

    1.2.3 Limit states

    1.3 RC design

    1.3.1 Assumptions
    ·8 Concrete exposed to earth and weather : no

    1.3.2 Analysis of punching and shear

    Shear

    Design combination ULS : DSGN1 N=2720.00 My=1680.00


    Load factors: 0.90 * Foundation weight
    0.90 * Soil weight
    Design load:
    Nr = 2956.25 (kN) Mx = -0.00 (kN*m) My =
    1680.00 (kN*m)
    Length of critical circumference: 1.80 (m)
    Shear force: 777.49 (kN)
    Section effective height heff = 0.75 (m)
    Shear area: A = 1.35 (m2)
    Shear stress: 0.57 (MPa)
    Admissible shear stress: 0.61 (MPa)
    Safety factor: 1.065 > 1

    1.3.3 Required reinforcement

    Spread footing:

    bottom:

    ULS : DSGN1 N=2720.00 My=1680.00


    My = 94.18 (kN*m) Asx = 14.41 (cm2/m)

    ULS : DSGN1 N=2720.00 My=1680.00


    Mx = 370.22 (kN*m) Asy = 14.41 (cm2/m)

    As min = 14.41 (cm2/m)

    top:

    ULS : DSGN1 N=2720.00 My=1680.00


    My = -1496.00 (kN*m) A'sx = 30.49 (cm2/m)
    A'sy = 0.00 (cm2/m)

    As min = 14.41 (cm2/m)

    Column pier: 1
    Longitudinal reinforcement A = 0.00 (cm2) A min. = 0.00 (cm2)
    A = 2 * (Asx1 + Asy1)
    Asx1 = 0.00 (cm2) Asy1 = 0.00 (cm2)
    Column pier: 2
    Longitudinal reinforcement A = 0.00 (cm2) A min. = 0.00 (cm2)
    A = 2 * (Asx2 + Asy2)
    Asx2 = 0.00 (cm2) Asy2 = 0.00 (cm2)

    1.3.4 Provided reinforcement


    2.3.1 Spread footing:
    Bottom:
    Along X axis:
    13 Grade 420 16 l = 7.85 (m) e = 1*-0.77 + 12*0.13
    Along Y axis:
    57 Grade 420 16 l = 2.05 (m) e = 1*-3.63 + 56*0.13
    Top:
    Along X axis:
    15 Grade 420 22 l = 7.98 (m) e = 1*-0.76 + 14*0.11
    Along Y axis:
    17 Grade 420 10 l = 1.96 (m) e = 1*-3.59 + 16*0.45

    2.3.2 Pier

    Column pier: 1
    Longitudinal reinforcement
    Along X axis:
    2 Grade 420 15.9 l = 2.04 (m) e = 1*-3.11 + 1*0.21
    Along Y axis:
    2 Grade 420 15.9 l = 2.10 (m) e = 1*-0.11 + 1*0.21
    Transversal reinforcement
    4 Grade 420 10 l = 1.31 (m) e = 1*0.26 + 1*0.20 + 2*0.12

    Column pier: 2
    Longitudinal reinforcement
    Along X axis:
    2 Grade 420 15.9 l = 2.04 (m) e = 1*2.89 + 1*0.21
    Along Y axis:
    2 Grade 420 15.9 l = 2.10 (m) e = 1*-0.11 + 1*0.21
    Transversal reinforcement
    4 Grade 420 10 l = 1.31 (m) e = 1*0.26 + 1*0.20 + 2*0.12

    2 Material survey:
    ·9 Concrete volume = 11.12 (m3)
    ·10 Formwork = 15.28 (m2)

    ·11 Steel Grade 420


    ·12 Total weight = 755.77 (kG)
    ·13 Density = 67.97 (kG/m3)
    ·14 Average diameter = 17.1 (mm)
    ·15 Survey according to diameters:

    Diameter Length Number:


    (m)
    10 1.31 8
    10 1.96 17
    #5 2.04 4
    #5 2.10 4
    16 2.05 57
    16 7.85 13
    22 7.98 15

    You might also like