Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 1K views

    Structure: 1 Dimension Data Foundation Size: Qmax Qa, OK! Qmax Qa, OK! Qmax Qa, OK!

    Uploaded by

    dantevarias
    This document provides the structure, loading, and design details for a water storage tank. Key points: - The tank has a 16m diameter foundation with various wall thicknesses and embedment depths. - Design loads include empty, operating, and test water levels, as well as wind, earthquake, and internal pressures. - Stability is checked against allowable soil bearing pressure and factors of safety for overturning and sliding. - Reinforcement is designed for the anchor bolts connecting the tank to its foundation ring beam, as well as hoop and tension bars. - The footing is designed to resist bending and shear forces calculated based on a 1.4 load factor case combining dead and

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Structure: 1 Dimension Data Foundation Size: Qmax Qa, OK! Qmax Qa, OK! Qmax Qa, OK!

    Uploaded by

    dantevarias
    1K views5 pages
    This document provides the structure, loading, and design details for a water storage tank. Key points: - The tank has a 16m diameter foundation with various wall thicknesses and embedment depths. - Design loads include empty, operating, and test water levels, as well as wind, earthquake, and internal pressures. - Stability is checked against allowable soil bearing pressure and factors of safety for overturning and sliding. - Reinforcement is designed for the anchor bolts connecting the tank to its foundation ring beam, as well as hoop and tension bars. - The footing is designed to resist bending and shear forces calculated based on a 1.4 load factor case combining dead and

    Original Description:

    Example calculation for ring beam design using ASCE 7-05 and API-650.

    Original Title

    Ring Beam Design

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides the structure, loading, and design details for a water storage tank. Key points: - The tank has a 16m diameter foundation with various wall thicknesses and embedment depths. - Design loads include empty, operating, and test water levels, as well as wind, earthquake, and internal pressures. - Stability is checked against allowable soil bearing pressure and factors of safety for overturning and sliding. - Reinforcement is designed for the anchor bolts connecting the tank to its foundation ring beam, as well as hoop and tension bars. - The footing is designed to resist bending and shear forces calculated based on a 1.4 load factor case combining dead and

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    1K views5 pages

    Structure: 1 Dimension Data Foundation Size: Qmax Qa, OK! Qmax Qa, OK! Qmax Qa, OK!

    Uploaded by

    dantevarias
    This document provides the structure, loading, and design details for a water storage tank. Key points: - The tank has a 16m diameter foundation with various wall thicknesses and embedment depths. - Design loads include empty, operating, and test water levels, as well as wind, earthquake, and internal pressures. - Stability is checked against allowable soil bearing pressure and factors of safety for overturning and sliding. - Reinforcement is designed for the anchor bolts connecting the tank to its foundation ring beam, as well as hoop and tension bars. - The footing is designed to resist bending and shear forces calculated based on a 1.4 load factor case combining dead and

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 5

    STRUCTURE:

    1 DIMENSION DATA FOUNDATION SIZE


    d1 = 0.30 m Di = 16.00 m
    w1 w2 d2 = 2.50 m w1 = 0.30 m
    d3 = 0.40 m w2 = 0.20 m
    Tank Shell Di
    b1 = 0.50 m
    b2 = 1.00 m
    LOADING DATA
    d1 Qe = 877 kN (Empty)
    dgw Tank Qo = 32004 kN (Operation)
    Bottom Qt = 33957 kN (Test)
    Hw = 379 kN (Wind)
    d2 Ring Beam
    He = 1338 kN (Earthquake)
    Mw = 3755 kNm (Wind)
    M
    d3 e1 = 10541 kNm (Earthquake)
    Me2 = 13530 kNm (Earthquake)
    b1 b2 IP = kNm (Internal Pressure)
    S = kNm (Snow)
    g = 9.81 g : gravity acceleration
    2 DESIGN LOAD
    1) WEIGHT OF STRUCTURAL PROPER
    Soil (s) = 19.0 KN/m3
    Reinforced concrete (rc) = 24.0 KN/m3
    Ground water (w) = 10.0 KN/m3
    *) assumed ground water level GL-0.0m shall be considered on design
    1) DESIGN FORCE CALCULATION
    Ring Beam Weigt (Df) = /4 [(Di+2 x w1)2-(Di - 2xw2)2] x 2.8m xrc = 1699.5 kN
    Footing Weight (Wf) = /4 [(Di - 2xw2) -(Di-2xw2 -2xb2) ] x 0.40m xrc = 440.3 kN
    2 2

    Soil Above Footing (Sw) = /4 [(Di - 2xw2)2-(Di-2xw2 -2xb2)2] x 2.40m xs = 2091.5 kN


    Inside Soil Weight (Swi) = (Di-2 x w2 -2xb2) /4 x 2.8 m x s
    2
    = 7728.2 kN
    Total, Fw = ###### kN
    3 STABILITY CHECK
    3.1 ALLOWABLE SOIL BEARING PRESSURE
    Allowable Soil Bearing(qa) = 340.0 KN/m2 For Long Term
    Allowable Soil Bearing(qa) = 340.0 KN/m2 For Short Term
    3.2 SOIL BEARING CHECK
    At = /4 (Di+2xw1)2 = 216.42 m2 , Area of tank bottom
    Ar = /4 [(Di+2xw1)2-(Di - 2xw2 - 2xb2)2] = 71.16 m2 , Area of ring beam
    4 4
    Zr = /32 [(Di+2xw1) -(DI-2xw2- 2xb2) ]/(Di+2xw1) = 246.76 m3 , Section Modulus of Ring
    qd = (Qo-Qe)/At + (Qe + Df + Wf + Sw)/Ar Beam with footing
    qm = [ Me2 + Hex(d1 + d2)]/Zr
    qmax = qd + qm
    2
    Load Case qd qm qmax (kN/m ) qa Remarks
    1.0(D + Qo) 215.6 0.0 215.6 340.0 qmax<qa, OK!
    1.0(D + Qo) + 0.70*E 215.6 49.0 264.6 340.0 qmax<qa, OK!
    0.9*(D + Qo) + 0.7*E 208.4 49.0 257.4 340.0 qmax<qa, OK!
    1.0(D + Qe) + W 75.8 19.5 95.4 340.0 qmax<qa, OK!
    0.90(D + Qe) + W 68.7 19.5 88.2 340.0 qmax<qa, OK!
    1.0(D + Qt) + W 224.6 19.5 88.2 340.0 qmax<qa, OK!
    3.3 SOIL BEARING CHECK (GLOBAL CHECK)
    e = M / (Q + Fw)
    note : Formulas of qmax and qmin are shown in Attachment-1
    Load Case M (kN-m) e (m) qmax (kN/m2)qmin (kN/m2) qa Remarks
    1.0(D + Qo) 0.0 0.00 203.1 203.1 340.0 qmax<qa, OK!
    1.0(D + Qo) + 0.70E 19472.3 0.44 251.9 154.4 340.0 qmax<qa, OK!
    0.90(D + Qo) + .70E 19472.3 0.49 226.7 138.9 340.0 qmax<qa, OK!
    1.0(D + Qo) + W 4816.3 0.11 219.4 186.9 340.0 qmax<qa, OK!
    0.90(D + Qe) + W 4816.3 0.42 66.2 40.6 340.0 qmax<qa, OK!
    1.0(D + Qt) + W 4816.3 0.10 229.1 195.2 340.0 qmax<qa, OK!

    3.4 OVERTURNING CHECK

    FOS = Mr N = Total Weight


    > 1.25
    Mo Mr = N x (Di+2xw1)/2
    Load Case N (kN) Mr (kN-m) Mo (kN-m) FOS Remarks
    1.0(D + Qo) + 0.70*E 39567 328409 19472 16.90 >1.25, OK!
    0.90(D + Qo) + 0.70*E 33957 281839 19472 14.50 >1.25, OK!
    1.0(D + Qo) + W 43964 364899 4816 75.80 >1.25, OK!
    0.90(D + Qe) + W 11553 95887 4816 19.90 >1.25, OK!
    0.90(D + Qt) + W 45916 381104 4816 79.10 >1.25, OK!

    3.5 SLIDING CHECK

    FOS = Nx
    > 1.25
    H = 0.5
    Load Case N x (kN) H (kN) FOS Remarks
    1.0(D + Qo) + 0.70*E 19784 937 21.10 >1.25, OK!
    0.90(D + Qo) + 0.70*E 16978 937 18.10 >1.25, OK!
    1.0(D + Qo) + W 21982 379 58.00 >1.25, OK!
    0.90(D + Qe) + W 5776 379 15.20 >1.25, OK!
    0.90(D + Qt) + W 22958 379 60.60 >1.25, OK!

    4 REINFORCEMENT DESIGN

    1) MAIN REINFORCING BAR


    MATERIALS
    Reinforced concrete fcu = 28.0 N/mm2
    Reinforcing bar fy = 390.0 N/mm2
    Anchor bolt fb = 413.0 N/mm2
    Factor for Anchor Bolt ab = 0.75
    ar
    Factor for Reinforcement = 0.75

    4.1 Check of Links for Anchor Capacity


    Dab = 30 mm, Diameter of Anchor Bolt
    Ase = 636 mm2, Diameter of Anchor Bolt
    Leb = 0.740 m , Embeddment Length of Anchor
    e = 0.225 m , Edge Distance of Anchor Bolt
    cc = 0.100 m , concrete cover
    k = 0.236 m ,Furthest Distance of Effective Link to Anchor Bolt
    Ld1 = Leb - TAN(35o) x k - cc, Effective Development Length
    = 0.525 m
    Drb = 16 mm, Diameter of Links
    S = 250 mm,Spacing of Links
    Ld = 0.570 m, Standard Development Length of links in tension
    Nrb = 4 , Effective Quantity of Links to Resist the Anchor Bolt
    = Ld1/Ld , Effective Length Factor of Reinforcing Bar
    = 0.92
    Tuab = ab*'/4 (Dab)2 x fb / 1000, Tension capacity of Anchor Bolt (kN)
    = 218.93 kN
    Turb = ar'/4 (Drb)2 x Nrb x fy x /m/1000, Tension Capacity of Anchor Reinforcement
    = 288.83 kN
    Tuab
    = 0.76 < 1.0, OK!
    Turb
    Shrinkage Reinforcement Check
    Area of Links per meter > 0.0025xb1x1000mm
    1608 > 1250 OK!

    4.2 Hoop Tension Check


    Design Forces
    Di
    quma

    Ka = 0.33 , active pressure coefficient


    h= 2.8 m , height of ring beam

    qu1 qu3

    Hoop Tension Claculation

    Load Case : 1.4 (D + Qo) + 1.0E

    e = 1.43*(Me1 + Me2) / 1.4*(Q + Fw) Mu = 1.43*(Me1 + Me2)


    note : Formulas of qumax are shown in Attachment-1
    Mu (kN-m) e (m) qumax (kN/m2)
    1.4 (D + Qo) + 1.0E 24071.4 0.39 348.6

    qu1 = Ka x qumax
    = 115.1 kN/m2
    qu3 = 1.6 x Ka x s x h + 1.6 X w x h
    = 29.3 kN/m2
    Ring Tension (Tu)
    Tu = (Di/2) x [h x qu1 + 0.50h x qu3]
    = 2906.0 kN

    Check for Tension Bar


    Dtb = 25 mm, Diameter of Tension Bar
    Ntb = 30 mm, Number of Tension Bar

    Asreq = Tu / (0.90*fy)
    = 8279 mm2
    Amin= 0.005 x b1 x h
    = 7000 mm2

    Provided As= 14726 mm2 > Asreq and Asmin, OK!


    4.3 Footing Design Forces

    Load Case : 1.4 (D + Qo) + 1.0E

    Wu = 1.4 x qmax(local) - [1.4 x (Qo - Qe)/ At]


    = 169.1 kN/m / meter strip

    Mu = Wu x b22/2
    Mu = 84.6 kN-m / meter strip

    Vu = Wu x b2
    = 169.1 kN / meter strip

    For Footing Design Strength Design, refer to next page

    You might also like