Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 2K views

    Dike Wall Design

    Uploaded by

    dantevarias
    The document provides details on the design of a retaining wall including: 1) Dimensions and layout of the L-shaped retaining wall with heights of 1.1m and 1.8m. 2) Force diagram showing lateral soil pressures and other loads acting on the wall. 3) Design parameters including soil properties, material strengths, and allowable factors of safety. 4) Calculations for stability including overturning moment and soil bearing pressure. 5) Design of the wall and footing sections to resist bending and shear stresses.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Dike Wall Design

    Uploaded by

    dantevarias
    2K views4 pages
    The document provides details on the design of a retaining wall including: 1) Dimensions and layout of the L-shaped retaining wall with heights of 1.1m and 1.8m. 2) Force diagram showing lateral soil pressures and other loads acting on the wall. 3) Design parameters including soil properties, material strengths, and allowable factors of safety. 4) Calculations for stability including overturning moment and soil bearing pressure. 5) Design of the wall and footing sections to resist bending and shear stresses.

    Original Description:

    Structural Design Calculation of a Dike Wall (Retaining Wall) ACI 318-11

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides details on the design of a retaining wall including: 1) Dimensions and layout of the L-shaped retaining wall with heights of 1.1m and 1.8m. 2) Force diagram showing lateral soil pressures and other loads acting on the wall. 3) Design parameters including soil properties, material strengths, and allowable factors of safety. 4) Calculations for stability including overturning moment and soil bearing pressure. 5) Design of the wall and footing sections to resist bending and shear stresses.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    2K views4 pages

    Dike Wall Design

    Uploaded by

    dantevarias
    The document provides details on the design of a retaining wall including: 1) Dimensions and layout of the L-shaped retaining wall with heights of 1.1m and 1.8m. 2) Force diagram showing lateral soil pressures and other loads acting on the wall. 3) Design parameters including soil properties, material strengths, and allowable factors of safety. 4) Calculations for stability including overturning moment and soil bearing pressure. 5) Design of the wall and footing sections to resist bending and shear stresses.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 4
    At a glance
    Powered by AI
    The document discusses the design of an L-shaped retaining wall including calculations for stability, forces, and reinforcement.

    The retaining wall has dimensions of B1 = 400 mm, B2 = 400 mm, L1 = 1500 mm, D = 600 mm, H1 = 1100 mm, H2 = 1800 mm.

    The soil properties considered are internal friction angle of 30 degrees and dry unit weight of 9 kN/m3. The material properties include unit weight of concrete and steel reinforcement.

    3.

    1 LAYOUT OF RETAINING WALL

    3.2 OUTLINE OF RETAINING WALL AND DIMENSIONS (SECTION I)


    The retaining wall is L-shape as shown below

    B1
    B1 = 400 mm GL+ 1.500M
    B2 = 400 mm
    L1 = 1500 mm
    D= 600 mm H2
    H1 = 1100 mm GL- 0.300M
    H2 = 1800 mm
    H1

    L1 B2
    3.3 FORCE DIAGRAM
    GL+ 1.500M

    FL1
    SURCHARGE LOAD (S)
    W4
    GL- 0.300M W1
    yL1
    FL2 W3
    (Soil Weight) TOE
    yL2
    W2
    Liquid Pressure
    (L) Bouyant Force (Bf)
    3.4 DESIGN PARAMETER

    Soil Properties
    Ø= 30.0 deg., soil internal friction angle
    2
    gs = 9.0 kN/m , unit weight of soil (Dry)
    Ka = 0.33 Active Pressure Coeficient, (1-SIN Ø)/(1+SIN Ø) ]

    Material Properties

    3
    gc = 24.0 kN/m , unit weight of reinforced concrete
    2
    f'c = 24.0 N/mm , cylindrical compressive strength of concrete
    2
    Fy = 390.0 N/mm , yield strength of steel reinforcement

    Unit Weight of Loadings

    3
    gw = 10.0 kN/m , unit weight of Ground Water
    3
    gL = 9.0 kN/m , unit weight of Liquid

    Allowable Factor of Safety

    Factor of Safety for Overturning= 1.5


    Factor of Safety for Sliding = 1.5

    Allowable Soil Pressure

    2
    Allowable Soil Pressure for Permanent Case, qa = 250.0 kN/m

    3.5 STABILITY CHECK

    Lateral Forces Calculation

    Force, FL Lever Arm,


    Item Mo (kN-m) gf Fult
    (kN) YL (m)

    FL1 14.6 2.30 33.6 1.4 20.44


    FL2 3.6 1.15 4.1 1.4 5.04
    total = 18.2 37.7 25.5

    Where : Mo = Moment about toe


    gf = Load Factor for Ultimate Loads
    Fult = Factored Lateral Load
    Weight Calculation and Resisting Moment (Mr)

    Lever Arm
    Item Force (kN) Mr (kN-m)
    (m)
    W1 27.8 0.200 5.57
    W2 27.4 1.150 31.46
    W3 31.4 0.950 29.78
    W4 24.3 0.950 23.09
    Bf -32.3 0.950 -30.69 <--- Bouyant Force
    total = 78.6 59.2

    Overturning Check

    ∑Mr
    FOS = = 1.57 > 1.50, OK!
    ∑Mo

    Soil Bearing Check


    Compute for Eccentric Moments

    Lever Arm,
    Item Force (kN) Me (kN-m)
    y (m)

    FL1 14.60 2.30 33.58


    FL2 3.60 1.15 4.14
    W1 27.84 0.75 20.88
    total = 58.60
    where : Me is eccentric moment from centroid of footing

    Compute for Eccentricity

    ∑Me 58.60
    e= =
    ∑W 110.9 (No Bouyant Force)
    = 0.529 m

    (L1+B2)/6 = 0.317 m < e, Triangular Pressure


    ∑W Where : A = 1.0m x L
    qmax= xa
    A a =(2/3) / ( 0.5 - e / L )
    L = (L1 + B2)
    = 175.4 kPa < 250.0 kPa, OK!
    qmin= 0.0 kPa (Triangular Pressure)
    3.6 DESIGN OF WALL

    3.6.1 Ultimate Design Forces


    Lever Arm,
    Item Force (kN) Mo (kN-m) gf Fult Muwall
    y (m)

    FL1 14.6 2.30 33.58 1.4 20.44 47.01


    FL2 3.6 1.15 4.14 1.4 5.04 5.80
    total = 18.2 25.5 52.81

    3.6.2 Ultimate Design Capacity

    Mucapwall = φb*B*dwall2*f'c*q(1 - 0.59q)

    φb = 0.9 , strength reduction factor for bending


    B= 1000 mm, design width
    cc = 50 mm, concrete cover
    dwall = 342 mm, effective depth
    Db = 16 mm, rebar diameter
    Spacing = 200 mm, rebar spacing
    2
    As = 1005.31 mm , area of reinforcement
    As / Bd = 0.00294 reinforcement ratio
    q= 0.047767

    Mucapwall = 117.28 kN-m > Muwall, OK!

    0.5
    Vcapwall = φs*1/6*f'c *dwall

    φs = 0.75 , strength reduction factor for shear


    Vcapwall = 209.43 kN > Fult, OK!
    3.7. DESIGN OF FOOTING
    Check for Bottom Bar B= 1000 mm, design width
    qult = 1.6 x (qmax + qmin)/2 cc = 75 mm, concrete cover
    = 140.3 kPa dwall = 515 mm, effective depth
    2
    MufBOT = qult*L1 /2 + Muwall Dbbop = 20 mm, bot rebar dia.
    = 210.6 kN-m Dbtop = 16 mm, toprebar dia.
    Mucapbot= 275.64 > MufBOT, OK! Spacing = 200 mm, rebar spacing
    2
    Asbot = 1570.796 mm ,area of bot bar
    Check for Top Bar Asbot /Bd = 0.00305 reinforcement ratio
    MufTOP = MUWALL = 52.81 kN-m q = 0.049564
    2
    Mucaptop= 178.32 > MufTOP, OK! Astop = 1005.31 mm ,area of top bar
    Astop /Bd = 0.001952 reinforcement ratio
    Check For Shear q = 0.031721
    Vufoot = qult*L1 = 210.44 kN
    Vcapfoot = 315.37 > Vufoot, OK!

    You might also like