Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 13 views

    EED 2018 - PJSec (2ndsem) Test2

    Uploaded by

    All_reg
    This document contains an exam for a course on engineering drawing. It provides 3 questions to answer with drawings. Question 1 describes a hexagonal prism and asks to draw its top and front views. Question 2 describes a right circular cone and asks to draw its projections. Question 3 describes a tetrahedron and asks to draw its projections. Students must answer any 2 of the 3 questions. The exam is worth a maximum of 30 marks and has a duration of 75 minutes.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    EED 2018 - PJSec (2ndsem) Test2

    Uploaded by

    All_reg
    13 views1 page
    This document contains an exam for a course on engineering drawing. It provides 3 questions to answer with drawings. Question 1 describes a hexagonal prism and asks to draw its top and front views. Question 2 describes a right circular cone and asks to draw its projections. Question 3 describes a tetrahedron and asks to draw its projections. Students must answer any 2 of the 3 questions. The exam is worth a maximum of 30 marks and has a duration of 75 minutes.

    Original Description:

    Elements of Engineering Drawing - Test Paper

    Original Title

    EED-2018_PJSec(2ndSem)-Test2

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains an exam for a course on engineering drawing. It provides 3 questions to answer with drawings. Question 1 describes a hexagonal prism and asks to draw its top and front views. Question 2 describes a right circular cone and asks to draw its projections. Question 3 describes a tetrahedron and asks to draw its projections. Students must answer any 2 of the 3 questions. The exam is worth a maximum of 30 marks and has a duration of 75 minutes.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    13 views1 page

    EED 2018 - PJSec (2ndsem) Test2

    Uploaded by

    All_reg
    This document contains an exam for a course on engineering drawing. It provides 3 questions to answer with drawings. Question 1 describes a hexagonal prism and asks to draw its top and front views. Question 2 describes a right circular cone and asks to draw its projections. Question 3 describes a tetrahedron and asks to draw its projections. Students must answer any 2 of the 3 questions. The exam is worth a maximum of 30 marks and has a duration of 75 minutes.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    B.M.

    S COLLEGE OF ENGINEERING, BANGALORE- 560 019


    DEPARTMENT OF MECHANICAL ENGINEERING
    CIE- II Sem: 2nd Section: PJ Sub: Elements of Engineering Drawing[14ME2ICEED]
    Duration: 75 mins Max Marks:30 Date:05/04/2018
    Note: Answer any two questions.

    Q1) A hexagonal prism of 20 mm side of base and height 50 mm is suspended freely from a corner. The axis
    of the prism is inclined at 45° to VP such that the lower end of the axis of the prism is farther away from the
    observer. Draw its top and front views. 15 Marks
    Q2) Draw the projections of a right circular cone of 60 mm base diameter and 80 mm height, when the
    generator lies in VP and the axis makes an angle of 300 with the HP. The apex is nearer to the observer than
    the base. 15 Marks
    Q3) A tetrahedron of 75 mm long edges has one edge on HP and inclined at 45° to VP, while a face
    containing that edge is vertical. Draw its projections. 15 Marks

    B.M.S COLLEGE OF ENGINEERING, BANGALORE- 560 019


    DEPARTMENT OF MECHANICAL ENGINEERING
    CIE- II Sem: 2nd Section: PJ Sub: Elements of Engineering Drawing[14ME2ICEED]
    Duration: 75 mins Max Marks:30 Date:05/04/2018
    Note: Answer any two questions.

    Q1) A hexagonal prism of 20 mm side of base and height 50 mm is suspended freely from a corner. The axis
    of the prism is inclined at 45° to VP such that the lower end of the axis of the prism is farther away from the
    observer. Draw its top and front views. 15 Marks
    Q2) Draw the projections of a right circular cone of 60 mm base diameter and 80 mm height, when the
    generator lies in VP and the axis makes an angle of 300 with the HP. The apex is nearer to the observer than
    the base. 15 Marks
    Q3) A tetrahedron of 75 mm long edges has one edge on HP and inclined at 45° to VP, while a face
    containing that edge is vertical. Draw its projections. 15 Marks

    B.M.S COLLEGE OF ENGINEERING, BANGALORE- 560 019


    DEPARTMENT OF MECHANICAL ENGINEERING
    CIE- II Sem: 2nd Section: PJ Sub: Elements of Engineering Drawing[14ME2ICEED]
    Duration: 75 mins Max Marks:30 Date:05/04/2018
    Note: Answer any two questions.

    Q1) A hexagonal prism of 20 mm side of base and height 50 mm is suspended freely from a corner. The axis
    of the prism is inclined at 45° to VP such that the lower end of the axis of the prism is farther away from the
    observer. Draw its top and front views. 15 Marks
    Q2) Draw the projections of a right circular cone of 60 mm base diameter and 80 mm height, when the
    generator lies in VP and the axis makes an angle of 300 with the HP. The apex is nearer to the observer than
    the base. 15 Marks
    Q3) A tetrahedron of 75 mm long edges has one edge on HP and inclined at 45° to VP, while a face
    containing that edge is vertical. Draw its projections. 15 Marks

    You might also like