This document provides information on text parameters, symbols, and designators that may be used in the device displays, screens, or drawings. Specific formatting is used to indicate parameters, inputs, outputs, and other signals. Standard graphical symbols are also used to represent logic gates and other functions.
This document provides information on text parameters, symbols, and designators that may be used in the device displays, screens, or drawings. Specific formatting is used to indicate parameters, inputs, outputs, and other signals. Standard graphical symbols are also used to represent logic gates and other functions.
This document provides information on text parameters, symbols, and designators that may be used in the device displays, screens, or drawings. Specific formatting is used to indicate parameters, inputs, outputs, and other signals. Standard graphical symbols are also used to represent logic gates and other functions.
This document provides information on text parameters, symbols, and designators that may be used in the device displays, screens, or drawings. Specific formatting is used to indicate parameters, inputs, outputs, and other signals. Standard graphical symbols are also used to represent logic gates and other functions.
Possible settings of text parameters, which may appear word-for-word in the display of the device or on the screen of a personal computer (with operation software DIGSI), are additionally written in italics. The same applies to the options of the menus. Indications Designators for information, which may be output by the relay or required from other devices or from the switch gear, are marked in a monospace type style in quotation marks. Deviations may be permitted in drawings and tables when the type of designator can be obviously derived from the illustration. The following symbols are used in drawings:
Device-internal logical input signal
Device-internal logical output signal
Internal input signal of an analog quantity
External binary input signal with number (binary input, input indication) External binary output signal with number (example of a value indication) External binary output signal with number (device indication) used as input signal
Example of a parameter switch designated FUNCTION with address
1234 and the possible settings ON and OFF
Besides these, graphical symbols are used in accordance with IEC 60617-12 and IEC 60617-13 or similar. Some of the most frequently used are listed below:
Analog input variable
AND-gate operation of input values
OR-gate operation of input values
Exclusive OR gate (antivalence): output is active, if only one of the
inputs is active
Coincidence gate: output is active, if both inputs are active or inactive
at the same time
Dynamic inputs (edge-triggered) above with positive, below with
negative edge
Formation of one analog output signal from a number of analog input
signals
Limit stage with setting address and parameter designator (name)
