Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 295 views

    WPQ WeldCanada PDF

    Uploaded by

    Ahmad Daniel
    1) This document is a Welder Performance Qualification record that documents testing and qualification of welder Elvis Tom Jones according to ASME Boiler and Pressure Vessel Code Section IX requirements. 2) The welder was tested using gas metal arc welding and shielded metal arc welding to weld 1/2 inch thick steel plates in the 3G position with an uphill progression. 3) The welder passed visual and bend testing and is qualified to weld in all positions on plate and pipe over 2-7/8 inches in diameter using E7018 and ER70S-6 filler metals.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    WPQ WeldCanada PDF

    Uploaded by

    Ahmad Daniel
    295 views1 page
    1) This document is a Welder Performance Qualification record that documents testing and qualification of welder Elvis Tom Jones according to ASME Boiler and Pressure Vessel Code Section IX requirements. 2) The welder was tested using gas metal arc welding and shielded metal arc welding to weld 1/2 inch thick steel plates in the 3G position with an uphill progression. 3) The welder passed visual and bend testing and is qualified to weld in all positions on plate and pipe over 2-7/8 inches in diameter using E7018 and ER70S-6 filler metals.

    Original Title

    WPQ-WeldCanada.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1) This document is a Welder Performance Qualification record that documents testing and qualification of welder Elvis Tom Jones according to ASME Boiler and Pressure Vessel Code Section IX requirements. 2) The welder was tested using gas metal arc welding and shielded metal arc welding to weld 1/2 inch thick steel plates in the 3G position with an uphill progression. 3) The welder passed visual and bend testing and is qualified to weld in all positions on plate and pipe over 2-7/8 inches in diameter using E7018 and ER70S-6 filler metals.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    295 views1 page

    WPQ WeldCanada PDF

    Uploaded by

    Ahmad Daniel
    1) This document is a Welder Performance Qualification record that documents testing and qualification of welder Elvis Tom Jones according to ASME Boiler and Pressure Vessel Code Section IX requirements. 2) The welder was tested using gas metal arc welding and shielded metal arc welding to weld 1/2 inch thick steel plates in the 3G position with an uphill progression. 3) The welder passed visual and bend testing and is qualified to weld in all positions on plate and pipe over 2-7/8 inches in diameter using E7018 and ER70S-6 filler metals.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    Welder Performance Qualification (WPQ)

    ASME Boiler and Pressure Vessel Code, Section IX, QW-301

    Company Name: WeldCanada.com


    Company Address: info@WeldCanada.com, 1 (877) WPS-WELD

    Welder Performance Qualification WPQ No. DEMO-WPQ Test Date: 12,12, 2005
    Welding Procedure Specification WPS No. DEMO-WPS Rev. 0
    Welder’s Name: Elvis Tom Jones Identification No: ETJ-2005 Stamp No: ETJ-05

    BASE METALS (QW-403)


    P-No: 1 Group No: 1 Material Specification: SA-36 Type or Grade: UNS No. K02600
    Welded to
    P-No: 1 Group No: 1 Material Specification: SA-36 Type or Grade: UNS No. K02600

    Thickness in (mm): 1/2 in. (13 mm)


    Test Coupon Production Weld Plate Pipe
    Base Metals Thickness Qualified: No Limit

    Welding Variables (QW-350) Actual Values Range Qualified


    Diameter, if pipe or tube, in (mm) Plate tested 2-7/8 in. (73 mm) OD and over
    Backing Without backing With or without backing
    Base Metals P-Number to P-Number 1 to 1 P-No. 1 thru 15F, 34, 41 thru 49
    1st Process 2nd Process 1st Process 2nd Process
    Welding Process GMAW SMAW GMAW SMAW
    Process Type Semi-Automatic Manual Semi-Automatic Manual
    Testing Position 3G 3G
    Vertical Progression Uphill Uphill Uphill Uphill
    Welding Positions Qualified:
    (A) Groove, Plate and Pipe over 24 in. (610 mm) OD F, V F, V
    (B) Groove, Pipe 2-7/8 in. (73 mm)* to 24 in. (610 mm) OD, incl. [*or Min. qualified diameter, if testing small pipe] F F
    (C) Fillet, Plate and Pipe for all thicknesses, fillet sizes, and diameters [when testing Groove] OR
    (C) Fillet, Plate and Pipe 2-7/8 in. (73 mm) OD and over [when testing Plate Fillet] OR F, H, V F, H, V

    (C) Fillet, Plate and Pipe within qualified diameter range [when testing Pipe Fillet]
    Filler Metal Specification (SFA) SFA 5.18 SFA 5.1
    Filler Metal Classification ER70S-6 E7018
    Filler Metal F-Number 6 4 6 1 to 4
    Filler Metal Product Type (GTAW, PAW) n/a n/a n/a n/a
    Deposited Weld Thickness, in (mm) 1/8 in. (3 mm) 3/8 in. (10 mm) 1/4 in. (6 mm) 3/4 in. (20 mm)
    Consumable Insert (GTAW, PAW) n/a n/a
    GMAW Transfer Mode Short Circuit n/a Short Circuit n/a
    GTAW Current Type/Polarity n/a n/a n/a n/a
    Inert Gas Backing (GTAW, PAW, GMAW) none n/a with or without n/a
    Type of Fuel Gas (OFW) n/a n/a n/a n/a
    Results
    Visual Examination of Completed Weld Result (QW-302.4): Acceptable criteria as per ASME QW-194
    Guided-Bend Tests Type (QW-160): Transverse Side Bend Specimens (QW-462.2)
    Alternative Volumetric Examination Results (QW-191): n/a RT or UT :
    Result and Comments: Two side bend tests were examined as per ASME QW-462.2. Acceptable criteria as per ASME QW-163
    Fillet-Weld Tests (QW-180): Plate [QW-462.4(b)]; Pipe-to-Plate or Pipe-to-Pipe [QW-462.4(c)]
    Fracture Test (QW-182): n/a Length and Percent of Defects:
    Macro-Examination (QW-184): n/a Fillet Size in (mm): X Concavity/Convexity in (mm):
    Result and Comments: Groove weld test qualifies fillet weld test as well
    Other tests and examinations: This Demo WPQ form has been prepared by WeldCanada.com Online Welding Software
    Film or specimens evaluated by: Tom Jones Company: Testing Lab Data, Inc.
    Mechanical tests conducted by: Mechanical Group, Ltd. Laboratory Test No. 1012-MIG
    Welding supervised by: WeldCanada.com Certified Welding Inspector (CWI)
    We certify that the statements in this record are correct and that the test coupons were prepared, welded, and tested in accordance with the requirements of
    Section IX of the ASME Boiler and Pressure Vessel Code.

    Manufacturer/ Contractor
    Authorized By:
    Welding Engineer
    Name: James Bond
    Name: Joe Smith
    Title: QA Manager
    Title: Welding Engineer
    Signature: J. B.
    Signature: J. S.
    Date: 14, 12, 2005
    Date: 14, 12, 2005

    You might also like