Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 34 views

    Eed Winter 2017 PDF

    Uploaded by

    Y D
    This document is an exam for a course on Elements of Electrical Design. It contains 5 questions covering topics like starters for DC and induction motors, insulation materials, transformer design, winding design, load assessment, and residential wiring design. Students are instructed to attempt all questions which involve calculations, derivations, explanations and designing wiring diagrams.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Eed Winter 2017 PDF

    Uploaded by

    Y D
    34 views2 pages
    This document is an exam for a course on Elements of Electrical Design. It contains 5 questions covering topics like starters for DC and induction motors, insulation materials, transformer design, winding design, load assessment, and residential wiring design. Students are instructed to attempt all questions which involve calculations, derivations, explanations and designing wiring diagrams.

    Original Title

    eed-winter-2017.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is an exam for a course on Elements of Electrical Design. It contains 5 questions covering topics like starters for DC and induction motors, insulation materials, transformer design, winding design, load assessment, and residential wiring design. Students are instructed to attempt all questions which involve calculations, derivations, explanations and designing wiring diagrams.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    34 views2 pages

    Eed Winter 2017 PDF

    Uploaded by

    Y D
    This document is an exam for a course on Elements of Electrical Design. It contains 5 questions covering topics like starters for DC and induction motors, insulation materials, transformer design, winding design, load assessment, and residential wiring design. Students are instructed to attempt all questions which involve calculations, derivations, explanations and designing wiring diagrams.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Seat No.: ________ Enrolment No.

    ___________

    GUJARAT TECHNOLOGICAL UNIVERSITY


    BE - SEMESTER–V (NEW) EXAMINATION – WINTER 2017
    Subject Code: 2150904 Date: 28/11/2017
    Subject Name: Elements of Electrical Design
    Time: 10:30 AM TO 01:00 PM Total Marks: 70
    Instructions:
    1. Attempt all questions.
    2. Make suitable assumptions wherever necessary.
    3. Figures to the right indicate full marks.

    Q.1 (a) What is the necessity of starter in DC motors and Induction motors? 03
    (b) Derive an expression for gap contraction factor in electrical machines. 04
    (c) Determine the mmf required for the air gap of a DC machine having following 07
    data:
    Core length=0.32 m including 4 ducts of 10 mm each, pole arc=0.19 m, slot
    pitch=65.4 mm, slot opening=5 mm, flux per pole=52 mWb.Given carter’s
    coefficient is 0.18 for opening/gap=1 and 0.28 for opening /gap=2.

    Q.2 (a) Give the classification of insulating materials on the basis of maximum 03
    permissible temperature rise.
    (b) Describe how we can calculate the magnetizing current in a transformer having 04
    concentrated windings.
    (c) State and explain various methods for calculating mmf required for the tapered 07
    teeth.
    OR
    (c) Explain the grading of starting resistance for DC Shunt motor starters. 07
    Q.3 (a) Define the following terms used in armature winding design: 03
    (1) back pitch (2) front pitch (3) winding pitch
    (b) Explain the working of three point starter with neat sketch for DC Shunt motor. 04
    (c) The power input to the rotor of 415 V, 3-phase slip-ring induction motor is 39 07
    KW.The total full load rotor copper losses are 1200 W.The rotor resistance per
    phase is 0.18 Ω. Assume maximum starting current is not to exceed 1.2 times
    full load current. Work out the resistance steps of a 4 section rotor resistance
    starter.
    OR
    Q.3 (a) What do you mean by short-pitched winding? Expalin its advantages. 03
    (b) Give the comparison of simplex lap and simplex wave windings. 04
    (c) Design a mush winding for 3-phase, 4-pole and 24 slots stator. Also show 07
    winding diagram for phase R only.
    Q.4 (a) Explain with neat sketch the power and control circuit of direct on line starter. 03
    (b) Explain the following terms related to AC winding: 04
    (1) Pitch factor (2) distribution factor
    (c) Give the design steps for small single phase transformer. 07

    OR
    Q.4 (a) Give the classification of electrical loads with examples. 03

    1
    (b) The domestic load in residential building is used in the following manner: 04
    Fluorescent lamps:40 W each,5Nos.,5 Hrs/day
    Fans 70W each,5 Nos,10 Hrs/day
    Refrigerator of 225 W,12 Hrs/day
    Heater of 1000 W,1Hr/day
    Television of 150 W,6 Hrs/day
    Calculate: (a) connected load (2) daily load factor.
    (c) Give the design steps for three phase variable choke coil. 07
    Q.5 (a) Discuss briefly how we can determine the number of sub circuits, rating of 03
    main switch and distribution boards?
    (b) State the rules for electrical wiring as per IS. 04
    (c) Which are the types of wiring system? Explain any three of them. 07
    OR
    Q.5 (a) Give the definition of the following terms with respect to load assessment: 03
    (1) demand factor (2) load factor (3) diversity factor
    (b) Explain the function of field regulators in DC Shunt motors and DC Shunt 04
    generators.
    (c) A small room of size 4m X 3m is required to be provided with lamp, fan, tube 07
    light and one 5A 3-pin socket outlet. Each of the points is controlled with their
    respective switches installed in one switch board. Assume PVC wiring system.
    No main switch is to be provided as the entry of the sub-circuit is from the
    nearby room. Do the following:
    (1) Mark the suitable location of the electrical points in the room and draw the
    installation plan.
    (2) Draw the wiring and schematic diagram.
    (3) Calculate the length of PVC conduit pipe required.

    *************

    You might also like