Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 281 views

    Metal Deck 2 Way

    Uploaded by

    mjfprgc
    This document describes the design of a 2-way slab with a metal deck. It provides the material properties, geometry, and loading for a slab with a span A of 2 meters and B of 3.15 meters. It then calculates the required slab thickness, rebar sizes and spacing to resist the bending and shear demands. The preliminary results show a 100mm thick slab with #12 rebar spaced at 300mm in both directions meets the design requirements.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    Metal Deck 2 Way

    Uploaded by

    mjfprgc
    281 views3 pages
    This document describes the design of a 2-way slab with a metal deck. It provides the material properties, geometry, and loading for a slab with a span A of 2 meters and B of 3.15 meters. It then calculates the required slab thickness, rebar sizes and spacing to resist the bending and shear demands. The preliminary results show a 100mm thick slab with #12 rebar spaced at 300mm in both directions meets the design requirements.

    Original Description:

    SOLVING FOR METAL DECK SLAB

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document describes the design of a 2-way slab with a metal deck. It provides the material properties, geometry, and loading for a slab with a span A of 2 meters and B of 3.15 meters. It then calculates the required slab thickness, rebar sizes and spacing to resist the bending and shear demands. The preliminary results show a 100mm thick slab with #12 rebar spaced at 300mm in both directions meets the design requirements.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    281 views3 pages

    Metal Deck 2 Way

    Uploaded by

    mjfprgc
    This document describes the design of a 2-way slab with a metal deck. It provides the material properties, geometry, and loading for a slab with a span A of 2 meters and B of 3.15 meters. It then calculates the required slab thickness, rebar sizes and spacing to resist the bending and shear demands. The preliminary results show a 100mm thick slab with #12 rebar spaced at 300mm in both directions meets the design requirements.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    You are on page 1of 3
    At a glance
    Powered by AI
    The document outlines the design process and calculations for a 2-way slab with a metal deck. It provides the input parameters, performs moment and shear calculations, and outputs the final slab design including rebar spacing and thickness.

    The slab being designed has a thickness of 100mm. The metal deck thickness is 1mm.

    The concrete compressive strength is 20.6MPa and the yield strength of the steel reinforcement is 275MPa. The slab depth and rebar diameter are also provided.

    DESIGN OF 2-WAY SLAB METAL DECK KEY User input required

    Metal Deck Design May be altered by user


    Material properties:
    concrete, fc' 20.6 MPa bar size 12 mmf
    steel, fy 275.00 MPa Ao 113.10 mm2
    rmin = 1.4/fy 0.005091 wDL 5.31 kPa
    design r = .18fc'/fy 0.013484 wLL 4.80 kPa
    w = rfy/fc' 0.18 Wu 15.59 kPa
    R = wfc'(1 - .59w) 3.31 partition 1.20
    1.7(1000fc'/fy) 127.35 slab 0.150 3.53
    finish 0.025 0.59
    wb 5.31

    wa
    A

    Slab Mark: RS3


    Data: A/B = 0.63 Load to beams: DL LL
    width A, m 2.00 short beam, wa 2.66 2.40 kN/m
    length B, m 3.15 long beam, wb 3.62 3.28 kN/m
    Slab coefficients: m = 0.63 Required depth = [(Mu/f)/R]1/2 40.39 mm
    short long Min. h = 2[A + B]x1000/180 = 57.22 mm
    c1 0.078 0.049 Adjust total depth, h 100.00 mm
    c2 0.039 0.025 d1 = 100 - (20 + f/2) 74.00 mm
    cp 0.059 0.037 d2 = d1 - f 62.00 mm
    Slab moments:
    M1
    M2
    4.87
    2.43
    3.06
    1.56
    [
    S max ≤ 3 t ,
    Ao
    . 4 ρmin d ]
    min
    300 mm oc

    Mp 3.68 2.31
    Preliminary Results: Rebar spacing, mm Short Long Direction
    S1 300 300 mm oc
    Slab thickness,mm = 100 S2 300 300 mm oc
    Slab rebars, use f = 12 Sp 300 300 mm oc

    d h

    dd
    t = thickness of metal deck
    L' = L/4. shear span of metal deck
    Material Properties for Metal Deck:
    fc' , MPa 20.6
    fy , MPa 275.00
    dd, mm 40.00
    t, mm 1.00
    h, mm 100.00 slab depth ok
    Temp. bar size, mm 10
    Es, MPa 2.05E+05
    L', mm 500.00
    Asdeck, mm2/m 1472
    Ec = .043w1.5(fc')1/2 = 4805.08(fc')1/2 = 2.181E+04 MPa
    b1 = 0.85 - 0.05(fc' - 27.5)/6.889 for fc' > 27.5 MPa, b1 = 0.85 for fc'< 27.5 MPa
    b1 = 0.85 M /f
    Ru = u 2 =
    rb =.85b1fc'(h - dd)/[(fy(600+fy))d] bd
    0.0278
    1 2w Ru  .85 f c '  2 Ru 
    r = Asdeck/(1000d) 0.0184 r = 1  1  = 1  1  =
    w  f y  f y  .85 f c ' 
    If r < rb, a = Asdeckfy/(.85fc'b), under reinforced
    If r > rb, a =b1kud, over reinforced rmax = .75(.85fc'b1/fy(600/(600+fy))) = 0.027834
    l = 705.88/(b1fc') 40.313 rmin = .5(1.4/fy, fc' /(4fy))min =
    1/2
    0.002063
    z = lr 0.74176
    a= 23.12 mm
    If r < rb, Mu = .9Asdeckfy(d-a/2)
    If r > rb, Mu =.75(.85fc'ab(d - a/2))
    Vn = .80bd[.45fc'1/2/12 + (3800/145)(rd/L')]
    Astemp =.9rmin(bd)/2 183.27 mm2/m
    Spacing, S = [1000Aot/Astemp, 5t, 600]min
    Spacing, S = 428.00 mm cc
    For neg. reinforcements: d = h - dd/2 - 20) 60 mm
    Compute spacing of main bars:
    At direction of metal deck At direction normal to metal deck
    Ru r As Ru r As
    Mn1 = 4.87 1.502 0.005717 343.032 Mn1 = 3.06 0.943 0.00353 211.684
    Mn2 = 2.43 0.751 0.002791 167.487 Mn2 = 1.56 0.481 0.00177 123.783
    Temp bars 3.68 1.136 0.004274 123.783 Mp = 2.31 0.712 0.00265 158.712
    S1 = 300 300
    S2 = 300 300
    Sp = 300 500 300
    Computed moment capacity:
    Mu = 24.93 kN-m/m moment capacity is ok
    Computed shear capacity:
    Vn = 15.83 kN/m shear capacity is ok
    Design Results:
    Slab Mark: RS3
    Slab thickness,mm = 100 Metal deck thickness, mm = 1.00
    Rebar spacing, mm, short direction Rebar spacing, mm, long direction
    S1 use f = 12 @ 300 use f = 12 @ 300
    S2 use f = 12 @ 300 use f = 12 @ 300
    Sp use f = 10 @ 500 use f = 12 @ 300
    Load to beams: DL LL
    Short beam, wa = 2.66 2.40 kN/m
    Long beam, wb = 3.62 3.28 kN/m

    You might also like