Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 113 views

    One Way Slab Deflection Check

    Uploaded by

    Talha Bin Tahir
    Depth check for Deflection of One way check by ACI318-14

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    One Way Slab Deflection Check

    Uploaded by

    Talha Bin Tahir
    113 views1 page
    Depth check for Deflection of One way check by ACI318-14

    Original Title

    One Way Slab Deflection check

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Depth check for Deflection of One way check by ACI318-14

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    113 views1 page

    One Way Slab Deflection Check

    Uploaded by

    Talha Bin Tahir
    Depth check for Deflection of One way check by ACI318-14

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    84 BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE (ACI 318-14) AND COMMENTARY (ACI 318R-14)

    CODE COMMENTARY
    Table 7.3.1.1—Minimum thickness of solid nonpre-
    stressed one-way slabs
    Support condition Minimum h[1]
    Simply supported ℓ/20
    One end continuous ℓ/24
    Both ends continuous ℓ/28
    Cantilever ℓ/10
    [1]
    Expression applicable for normalweight concrete and fy = 60,000 psi. For other
    cases, minimum h shall be modified in accordance with 7.3.1.1.1 through 7.3.1.1.3,
    as appropriate.

    7.3.1.1.1 For fy other than 60,000 psi, the expressions in


    Table 7.3.1.1 shall be multiplied by (0.4 + fy/100,000).

    7.3.1.1.2 For nonprestressed slabs made of lightweight


    concrete having wc in the range of 90 to 115 lb/ft3, the expres-
    sions in Table 7.3.1.1 shall be multiplied by the greater of (a)
    and (b):

    (a) 1.65 – 0.005wc


    (b) 1.09

    7.3.1.1.3 For nonprestressed composite slabs made of a


    combination of lightweight and normalweight concrete,
    shored during construction, and where the lightweight
    concrete is in compression, the modifier of 7.3.1.1.2 shall
    apply.

    7.3.1.2 The thickness of a concrete floor finish shall be


    permitted to be included in h if it is placed monolithically
    with the floor slab or if the floor finish is designed to be
    composite with the floor slab in accordance with 16.4.

    7.3.2 Calculated deflection limits R7.3.2 Calculated deflection limits—The basis for calcu-
    lated deflections for one-way slabs is the same as that for
    7.3.2.1 For nonprestressed slabs not satisfying 7.3.1 and beams. Refer to R9.3.2 for additional information.
    for prestressed slabs, immediate and time-dependent deflec-
    tions shall be calculated in accordance with 24.2 and shall
    not exceed the limits in 24.2.2.

    7.3.2.2 For nonprestressed composite concrete slabs satis-


    --`,`,,`,,```,`,,``,`,`,,``,`,``-`-`,,`,,`,`,,`---

    fying 7.3.1, deflections occurring after the member becomes


    composite need not be calculated. Deflections occurring
    before the member becomes composite shall be investigated,
    unless the precomposite thickness also satisfies 7.3.1.

    7.3.3 Reinforcement strain limit in nonprestressed slabs

    7.3.3.1 For nonprestressed slabs, εt shall be at least 0.004.

    7.3.4 Stress limits in prestressed slabs

    7.3.4.1 Prestressed slabs shall be classified as Class U, T,


    or C in accordance with 24.5.2.

    Provided by IHS American Concrete Institute – Copyrighted © Materialof–Texas


    Licensee=University www.concrete.org
    Revised Sub Account/5620001114
    No reproduction or networking permitted without license from IHS Not for Resale, 10/30/2014 11:51:26 MDT

    You might also like