Setting File of 630 KW FD Fan
Setting File of 630 KW FD Fan
Relay Details
1 Model No.
2 Application
3 Make
Network Data
1 Network Frequency
2 Setting Group activated
3 CT primary
4 CT secondary
5 CBT primary
6 CBT secondary
7 Base Current (Ib)
Protection Data
P225-MICOM
Motor Protection
Schneider Electric
50 Hz
1
100 Amps
1 Amp
50 Amps
1 Amp
64.8 Amps
YES
95%
105%
38%
7 minutes
130 minutes
Average 4.5
YES
250% of Ib
9 seconds
4 seconds
10 seconds
YES
324 Amps (1.2 times of starting current)
Definite Time
100 ms
YES
YES
364 Amps (1.35 times of starting current)
Definite Time
0.00 ms
YES
YES
14 Amps (31.1 % of Ib)
IDMT (Standard Inverse Time)
0.59
YES
YES
45 Amps (100 % of Ib)
Definite Time
0.00 ms
YES
YES
Definite Time
20% of Ib
500 ms
YES
1 Hour
3
2
3
10 minutes
NO
LED CONFIGURATION OF RELAY (SEPAM, M20) OF 375 KW
PUMP MOTOR
SL No. LED No. Description of Protection Output
1 LED-1 Short Circuit Stage-1 1&3
2 LED-2 Short Circuit Stage-2 1&3
3 LED-3 Earth Fault Stage-1 1&3
4 LED-4 Earth Fault Stage-2 1&3
5 LED-5 Thermal Overload Alarm 2
6 LED-6 Thermal Overload Trip 1&3
7 LED-7 NEGATIVE SEQUENCE CURRENT / UNBALANCE 1&3
8 LED-8 EXCESSIVE STARTING TIME AND LOCKED ROTOR 1&3
9 LED-9 STARTS PER HOUR 2
RELAY TEST REPORT OF 630 KW FD FAN MOTOR (MICOM-P225)
1 Test Date:- 11/25/2017
2 Relay Model No:- MICOM-P225
3 Application Motor Protection
4 Make Schneider Electric
5 Relay Serial No:- 36045459/09/11
6 Relay Location:- Feeder-2-In 1UA Board
7 Phase CTR:- 100/1 Amps
8 CB CTR 50/1 Amps
9 Base Current 64.8 Amps
A Measurement :-
Applied Current
Phase Reference Calculated Trip Time Measured Trip Time
(Secondary Value)
Applied Current
Phase Reference Calculated Trip Time Measured Trip Time
(Secondary Value)
Applied Current
Phase Reference (I/Ib) Calculated Trip Time Measured Trip Time
(Secondary Value)
R Phase [(2*14)/75] = 0.37 2 seconds 2.038 seconds
Y Phase 2 Times [(2*14)/75] = 0.37 2 seconds 2.026 seconds
B Phase [(2*14)/75] = 0.37 2 seconds 2.060 seconds
R Phase [(3*14)/75] = 0.56 1.25 seconds 1.263 seconds
Y Phase 3 Times [(3*14)/75] = 0.56 1.25 seconds 1.264 seconds
B Phase [(3*14)/75] = 0.56 1.25 seconds 1.271 seconds
G EARTH FAULT PROTECTION STAGE-2 (PHASE TO EARTH) (50N/51N-2) :-
Applied Current
Phase Reference Calculated Trip Time Measured Trip Time
(Secondary Value)
) (50/51-2) :-
ed Trip Time
FD Fan Motor details from data sheet:-
SL. NO. Description Value
1 Rating 630 KW
2 Voltage rating 6.6 KV
3 Make Shanghai Electric
4 Rated speed / Synchronization speed (rpm) = 988 / 1000 1478 rpm
5 Full Load current 64.8 Amps
6 No load current 14.0 Amps
7 Power factor at full load 0.916
8 Frequency 50 Hz
9 Thermal time constant 15 minutes
10 Cooling time constant 40 minutes
11 Starting Current at rated voltage 567 Amps
12 Starting time at Load coupled (in sec) at 80% of rated voltage 11.2 Secs
13 Starting time at Load coupled (in sec) at 100% of rated voltage 6.5 Secs
14 Starting time at Load coupled (in sec) at 110% of rated voltage 5.2 Secs
15 Locked rotor withstand time at 80% of rated voltage at hot condition 28 Secs
16 Locked rotor withstand time at 100% of rated voltage at hot condition 23 Secs
17 Locked rotor withstand time at 110% of rated voltage at hot condition 10 Secs
18 Locked rotor withstand time at 80% of rated voltage at cold condition 35 Secs
19 Locked rotor withstand time at 100% of rated voltage at cold condition 30 Secs
20 Locked rotor withstand time at 110% of rated voltage at cold condition 18 Secs
21 Method of starting DOL
22 Vibration Level 2.3 mm/s
23 Class of insulation F
24 Temp. Rise limit to class B
25 Number of equally spread start 3
26 No. of cold starts 2
27 No. of hot starts 1