Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
30 views

Application Note Ari

This document discusses induction generators and how they work. It begins with an introduction to generators in general and how they convert mechanical energy to electricity using electromagnetic induction. It then provides background on Michael Faraday's law of induction and how changing magnetic flux induces voltage in a conductor. The main components of an induction generator are described as the rotor, stator, and carbon brushes. The document discusses how induction generators can operate as motors or generators depending on whether the rotor speed is above or below the synchronous speed. Several applications of induction generators are provided such as pumping water or generating power from wind turbines.

Uploaded by

Raj Aryan
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
30 views

Application Note Ari

This document discusses induction generators and how they work. It begins with an introduction to generators in general and how they convert mechanical energy to electricity using electromagnetic induction. It then provides background on Michael Faraday's law of induction and how changing magnetic flux induces voltage in a conductor. The main components of an induction generator are described as the rotor, stator, and carbon brushes. The document discusses how induction generators can operate as motors or generators depending on whether the rotor speed is above or below the synchronous speed. Several applications of induction generators are provided such as pumping water or generating power from wind turbines.

Uploaded by

Raj Aryan
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

2015

Operation of Induction
Generators.
APPLICATION NOTE
ARIADNA D. FERNANDEZ
1. Introduction
A generator is a device that transform a type of energy into
electricity. Although it is not possible to generate or “create”
energy, it is possible to transform it. There are several types
of energy a generator could transform such as thermal,
kinetic (mechanical), chemical or potential energy.
Mechanical is the most common one. When a generator
converts mechanical energy to electricity, then it is also
called dynamo.
In today’s industry, generators are useful and well known
appliances. For example, they are used in vehicles, to Figure 1- Portable Generator
convert the energy coming from wind turbines at power
plants or just to power a house in case of a power loss.
Figure 1 shows a portable generator. This type of generator usually is a gas or diesel
powered device. It is one of the most common type of generator in today’s market.

2. Background Information
A generator is based on the principle of electromagnetic induction. This phenomenon was
discovered by Michael Faraday and it states that a current is produced in a conductor
when it is moved through a magnetic field. The voltage produced it is called
electromotive force (emf). This process could be reverse too, in other words if an
electrical charge is moving, then it will generate a magnetic field.

Faraday-Maxwell’s Law of induction.


Faraday-Maxwell’s law of induction established the relationship that the emf value versus
the number of turns (of a coil) times the rate of change of magnetic flux. The reason for
the minus sign is that the direction of the electromotive force direction opposes the change
in the flux that produces the voltage.
Electromagnetic induction has many applications. For example, in a credit cards (the
magnetic strips on the back of the card) or in order to generate voltage in motors. The last
one is very important because a generator is a “reverse” motor. Figure 2 shows a relation
of how the flux, coil and current interact in order to produce current and electromotive
force.
With the formula above (Faraday-Maxwell’s Law of Induction), it is possible to understand
how to optimize the amount of voltage produce by the generator. Some possible solutions
could be:
 Increasing the number of turns of wire in the coil. If there are more conductors
cutting through the magnetic field, then the amount of induced emf equals the
summation of all the loops.
 Increasing the speed of the
relative motion between
the coil and the magnet.
More voltage could be
induced if there is a faster
change of rate in the flux.
 Increasing the strength of
the magnetic field. If there
is a stronger magnetic field
there would be higher
voltage because
Figure 2-Components in Faraday's Law
are more lines
perpendicular to
cut.

3. How does a generator work


Electromagnetic induction it is a key factor in a generator’s operation. The main parts of a
generators are: carbon brushes, slip-rings, rotor and stator. The rotor is an electromagnet
made by coiling wires around two or more poles of metal core. The stator is a pair of plates
attached to the axle. The brushes are connected to the source of energy and work with the
commutator in order to let the induced current flow around the system.
Once the shaft and coil start spinning around the shaft, there is some current and
electromotive force produced. It is important to mention that this induced current moves in
the opposite direction of the rotation. Not all the positions during the rotation induces emf.
For example, when the flux is align with the magnetic field, then the flux is not cutting the
field. When the flux moves directly across the flux lines then, it is cutting the field at a
maximum rather therefore the emf is at its highest point. The maximum emf could be
calculated by the formula EMF= B*L*v*sin (α) where L is the length if the segment, B
corresponds to the magnetic field and v the speed. When alpha is 90 degrees then, the
voltage is at is maximum value.
If the generator induced current and it is revising direction every half turn then it is an
alternating current (AC). In other hand, if the induced current always turn in the same
direction then it is direct current (DC). Figure 3 shows the parts of a generator using
magnetic induction from a cross sectional point of view.

Figure 3. Induction Generator.

If an induction generator is
asynchronous, then at
synchronous speed no power is
delivered. The reason why there is
not power is because the
difference between the
synchronous speed and the
operating speed is zero. But if a
motor is driven at a higher speed
than the synchronous speed, the
torque will be negative and start
acting as a generator rather than a
motor. The generator could
deliver the desired power if the
slip is controlled according to the
load requirements. The graph presented in figure 4 shows the relation generator torque (rotational
force) vs speed. Torque it is a very important concept to keep on mind at the process of operating
a motor as a generator because it is necessary an external torque to be applied in order to turn the
rotor faster than the synchronous speed.
4. Connection/ Implementation Process and Benefits.

Motors can be also used as


generators. Both devices shares the
main parts (brushes, magnets, split
ring) the only difference is that in
the generator the coil is being turned
and generating emf. Also, the ends
of the coil are connected to a split
ring that is in contact with the
brushes. The last ones are the ones
in charge of rectify the induced
Figure 5 – Induction Generator by Prime Mover.
voltage In other words, if a prime
mover drives the rotor above
synchronous sped then the stator flux induces current in the rotor, then a motor could also
work as a generator. Now, it is important to mention that an induction generator is not a
self-excited machine so it will need from another source or device in order to start
rotating so it will required magnetizing current and reactive power. Example of other
sources are: a motor, water (turbines), wind (windmills) or combustion (like gasoline or
diesel in portable generators). An example of a generator rotating due a prime mover
could be observed in figure 5.
Some of the benefits of an induction generator technology are:
 Relative low cost. Most of the cost will relay in the price of the magnet used to
induce the electromotive force.
 Generator Power Quality. If the generator produces an unregulated voltage, it is
possible to make some changes in the speed or load in order to get a desired
voltage.
 In induction generators, the cage rotor helps to operate at a wider speed range by
changing the amplitude of the main winding.
 Simple and robust construction.

As every other devices, induction generators also have some disadvantages. The main
problem of this type of generator is that they usually take a large amount of reactive
power.
5. Applications

Generators are very important in today’s industry. They let to convert some type of energy intro
electricity. This is a great advantage because in some cases could let to use and operates
renewable energy and contribute to the environment. Some typical applications of Induction
Generators in today’s industry are:

1. “A Water Company finds that it can buy electrical power at low rates at night and sell
power at high rates during the daytime peak load period. It builds low and high storage
basins and installs several pumps. At night it pumps water from the low basin to the high
basin, buying power from the utility. At peak periods, the water flows back down through
the pumps, driving the motors as generators. The power is sold to the utilities. The
arrangement is so simple that it can be remotely operated.
2. The wind blows constantly between the desert and mountains of California. An
enterprising individual set up some towers with windmills driving Induction Generators
through gearboxes. Power is generated proportional to the wind velocity and sold to the
local utility. The operation of the "Wind Farm" is virtually automatic with the proper
equipment.” 1

6. Key concepts:
Electromagnetic induction: to induces current by moving a conductor across a magnetic
field.
Electromotive force (emf): Energy that is converter into electrical energy when unit
charge passes through it.
Torque: Rotational Force
Rotor: the rotating part of a motor.

References:

Meadows, Matt: Electromagnetic Induction, Chapter 25.

http://www.cttech.org/GOODWIN/academics/science-textbook/chap25.pdf

Vaidya, Jay: Advanced Electric Generator & Control for high speed Micro/mini Turbine based power
Systems.

http://www.electrodynamics.net/documents/electrodynamics_power_gen2002.pdf
1
NIDEC MOTOR CORPORATION: Induction Generator

http://www.usmotors.com/TechDocs/ProFacts/Induction-Generator.aspx

You might also like