Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 108 views

    Cooling Load Calculation

    Uploaded by

    Henry San Pedro
    This document contains an estimated heat load calculation for an air handling unit (AHU Tag No. SYSTEM-2) located at an unspecified customer location and room. It lists various factors that contribute to the sensible and latent heat loads, such as solar gain through glass, walls, and the roof; transmission gain through glass, partitions, ceilings, and floors; internal heat from people, lights, equipment, and appliances; and infiltration from outside air. It then calculates the total sensible heat, latent heat, and heat required to be removed by the AHU to maintain the desired temperature and humidity setpoints for the space.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Cooling Load Calculation

    Uploaded by

    Henry San Pedro
    108 views32 pages
    This document contains an estimated heat load calculation for an air handling unit (AHU Tag No. SYSTEM-2) located at an unspecified customer location and room. It lists various factors that contribute to the sensible and latent heat loads, such as solar gain through glass, walls, and the roof; transmission gain through glass, partitions, ceilings, and floors; internal heat from people, lights, equipment, and appliances; and infiltration from outside air. It then calculates the total sensible heat, latent heat, and heat required to be removed by the AHU to maintain the desired temperature and humidity setpoints for the space.

    Original Description:

    aircon sizing

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains an estimated heat load calculation for an air handling unit (AHU Tag No. SYSTEM-2) located at an unspecified customer location and room. It lists various factors that contribute to the sensible and latent heat loads, such as solar gain through glass, walls, and the roof; transmission gain through glass, partitions, ceilings, and floors; internal heat from people, lights, equipment, and appliances; and infiltration from outside air. It then calculates the total sensible heat, latent heat, and heat required to be removed by the AHU to maintain the desired temperature and humidity setpoints for the space.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    108 views32 pages

    Cooling Load Calculation

    Uploaded by

    Henry San Pedro
    This document contains an estimated heat load calculation for an air handling unit (AHU Tag No. SYSTEM-2) located at an unspecified customer location and room. It lists various factors that contribute to the sensible and latent heat loads, such as solar gain through glass, walls, and the roof; transmission gain through glass, partitions, ceilings, and floors; internal heat from people, lights, equipment, and appliances; and infiltration from outside air. It then calculates the total sensible heat, latent heat, and heat required to be removed by the AHU to maintain the desired temperature and humidity setpoints for the space.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 32

    Cooling and Dehumidifying Heat Load Est

    Estmated By
    Date
    Coustomer
    Location
    Room
    Classification
    AHU Tag No SYSTEM-2
    Item Sun gain Factor
    Solar gain glass
    North 0.0 39 0.56
    South 0.0 14 0.56
    West 0.0 158 0.56
    East 0.0 158 0.56
    NW 0.0 148 0.56
    NE 0.0 148 0.56
    SW 0.0 66 0.56
    SE 0.0 66 0.56
    Solar and trans gain-walls&roof 0.36
    North 2754.6 12.0 0.37
    South 2754.6 26.0 0.37
    West 3701.4 41.0 0.37
    East 3701.4 31.0 0.37
    NW 0.0 32.0 0.37
    NE 0.0 24.0 0.37
    SW 0.0 36.0 0.37
    SE 0.0 28.0 0.37
    Roof -Sun 14805.8 40.0 0.48
    Roof -Sun-Insulated 40.0 0.20
    Roof -Shaded 17.0 0.48
    Transmission gain-except walls & roof
    All glass 0.0 20.0 1.13
    Partition 0.0 15.0 0.36
    Ceiling 15.0 0.36
    Floor 14805.8 15.0 0.42
    Infiltration and Outside air
    Infiltration 20.0 1.08
    Outsideair 3000 20.0 1.08 0.10
    Internal Heat
    People 200 345 0
    Lights 14806 1.5 3.413
    Equipment 100.00 1 3413
    Appliances 1 3413
    Coffe Urn 0
    Food Warmer 0
    0 0
    Motor BKW 0.00 1 3413
    Room sensible heat-sub total
    2%Duct leakage& 2%R.A.Heat Regain + 4%Safety 10%
    Room Sensible Heat Total
    Room Latent Heat
    Infiltration
    outsideair 3000 73.5 0.68 0.10
    People 200 435
    Appilances 1 3413
    Coffe Urn 0
    Food Warmer 0
    0 0
    Vap.Trans 33313 0.029
    Room Latent Heat Sub-Total
    Duct leakage& R.A.Heat Regain + Safety 10%
    Room Latent Heat Total
    Room Total Heat (Sensible + Latent)
    Outside Air Heat
    air qty temp diff const 1 - bf
    Sensible 3000 20.0 1.08 0.90
    hum diff const
    Latent 3000 73.5 0.68 0.90
    Grand Total Heat SubTotal
    Heat gain% +leak gain%+ hp pump%+dehumpiplos% 10%
    Re- heat
    GRAND TOTAL HEAT
    HP & tons 167.1371545399
    Sensible heat factor
    Indicated adp 'f
    Selected adp 'F
    Dehumidifier rise (1-bf)*(rm temp -adp)
    Dehumidified air qty (Cfm) S.heat/(1.08*deh.rise)

    318.15
    340.58

    U Factor
    Wall

    Partition
    Glass
    ying Heat Load Estimate for SUMMER
    CONDITION DB 'F WB 'F RH
    OUTSIDE 95.0 81.0
    ROOM 75.0 50%
    DIFFERENCE 20.0
    JULY & MAY 10DEG
    GLASS, WALL & PARTITION AREAS (ft2)
    GLASS WALLS PARTNS
    Btu/hr NORTH 2754.6
    SOUTH 2754.6
    - WEST 3701.4
    EAST 3701.4
    NW 0.0
    NE 0.0
    - SW 0.0
    - SE
    - OTHER DATA TO BE FILLED 0.0
    - AREA 14,805.76 sft The ADP Table
    ROOF HEIGHT 13 ft FOR 75.0 & 50%RH
    12,230 FALSE CEILING HT. 26 ft SHR
    26,499 NO OF F.A.CHANGES 15 PER HR. 1
    56,151 NO. OF PEOPLE 200 0.03 0.92
    42,456 Steam 0 0.84
    - Brewer 0 0.78
    - 0 0.74
    - 0 0.71
    - LIGHTING LOAD 1.5 W/S. FT 0.69
    284,271 EQUIPMENT LOAD 100.0 KW 0.66
    - DIVERSITY FACTOR 1 0.64
    - SH PER PERSON 345 Btu/hr
    LH PER PERSON 435 Btu/hr
    BPF 0.1
    - CFM/PERSON 10
    - EXHAUST 0
    94,165 FLOOR GAIN 0 (1 if fl. gain exists else 0)
    ROOF(0)/CEILING(1) 1
    - ROOF (1 if Roof provided Insulation else 0)
    6,480 PARTITIONS (1 if Mod.Partitions exists else 0)
    CEILING 14806 (1 if Mod.Ceiling Panels exists else 0)
    69,000 PRE-COOLING COIL 0 (1 if Pre-cooling/TFA exists else 0)
    75,798 ADP&SHR 0 (1 if ADP & SHR revised else 0)
    341,300 Motor bkw IF ADP & SHR REVISED,CONSIDER FOL
    - SHR 0.85 REV. ESHR
    ADP 49.00 REV. ADP
    - TR 133.71 REV. TR
    - Dehumd. CFM 42539 REV. AIR QTY CFM
    - Reheat,KW N/A RE- HEAT IN KWTO INCREASE ADP
    1,008,349
    66,705 FRESH AIR REQUIREMENT
    1,075,054 NOS CFM/PER ACH
    PEOPLE 200 15
    - EXHAUST
    14,996 NO. OF A/CHANGES
    87,000 TOTAL FRESH AIR
    - Ventilation cfm/ft2 14806 0.2
    PRE-COOLING COIL
    - DB 'F WB 'F RH
    - LEV. COND 56.0 55.9 99.5
    71,016 INSIDE 69.0 58.9 1
    173,012
    17,301 DIFF. -13.0
    190,314
    1,265,367 1. SUPPLY AIR TEMP. ( ROOM O/L AIR)
    Trm-( RSH/(1.08 x (De. CFM+CFMoa))
    * If above is too high. Determine supply CFM
    58,320 for desired diff. By supply air qty. formula
    2. ENTERING DRY BULB TEMPERATURE
    134,964 ( CFM oa x Toa)+(CFMra X Trm)/CFMsa)
    1,458,652 3. ENTERING AIR MOISTURE CONTENT
    145,865 (CFM oa*Woa+CFM ra*Wrm)/CFM da
    N/A 4. LEAVING DRY BULB TEMPERATURE
    1,604,517 ( Tadp + (BF(Tedb - T adp)))
    133.71 5. SUPPLY AIR CFM
    0.85 ( RSH/1.08 X (Trm-Tsa)
    49 From psychrometric chart T ewb =
    51 T lwb =
    23 # when bypassing a mixture of OA & RA use supply CFM, when
    42,539 bypassing RA only, use deh. CFM
    TH GR/LB
    138.4
    64.9
    0.0 73.5

    U' FACTORS
    WALL 0.360 11.4 34.2
    GLASS 0.560 15.96 13.68
    ALL GLASS 1.130 27.36 47.88
    PARTITION 0.360
    M.PARTN 0.150
    CEILING 0.424
    M.CLG.PANL 0.150
    FLOOR 0.424
    ROOF 0.510

    The ADP Table 32.56


    FOR 75.0 & 50%RH 9
    ADP 6.375
    55.2 0.00 47.935
    54 52.24
    52 0.00
    50 0.00
    48 0.00
    46 0.00
    44 0.00
    40 0.00
    34 0.00

    sts else 0)

    ded Insulation else 0)


    ions exists else 0)
    g Panels exists else 0)
    g/TFA exists else 0)
    R revised else 0)
    P & SHR REVISED,CONSIDER FOLWG
    0.97
    50
    0.00
    0
    TO INCREASE ADP 0.00

    NET (CFM)
    3000
    0
    0

    3000
    G COIL
    TH GR/LB
    23.8 66.7
    25.6 58.2

    -1.8 8.5

    53.14 0F
    23.40

    76.32 0F

    79.23 Gr./lb

    51.32 0F

    45539.32 0F

    F
    0

    F
    0
    Cooling and Dehumidifying Heat Load Est
    Estmated By
    Date
    Coustomer
    Location
    Room
    Classification
    AHU Tag No SYSTEM-2
    Item Sun gain Factor
    Solar gain glass April
    North 0.0 39 13 0.56
    South 0.0 14 14 0.56
    West 0.0 158 163 0.56
    East 0.0 158 163 0.56
    NW 0.0 148 130 0.56
    NE 0.0 148 130 0.56
    SW 0.0 66 94 0.56
    SE 0.0 66 94 0.56
    Solar and trans gain-walls&roof 0.36
    North 0.0 12.0 0.37
    South 0.0 26.0 0.37
    West 0.0 41.0 0.37
    East 0.0 31.0 0.37
    NW 0.0 32.0 0.37
    NE 0.0 24.0 0.37
    SW 0.0 36.0 0.37
    SE 0.0 28.0 0.37
    Roof -Sun 40.0 0.48
    Roof -Sun-Insulated 295.9 40.0 0.20
    Roof -Shaded 17.0 0.48
    Transmission gain-except walls & roof
    All glass 0.0 20.0 1.13
    Partition 677.9 15.0 0.36
    Ceiling 295.9 15.0 0.36
    Floor 295.9 15.0 0.42
    Infiltration and Outside air
    Infiltration 20.0 1.08
    Outsideair 0 20.0 1.08
    Internal Heat
    People 9 255 0
    Lights 296 1.5 3.413
    Equipment 0.25 1 3413
    Appliances 1 3413
    Coffe Urn 0
    Food Warmer 0
    0 0
    Motor BKW 0.00 1 3413
    Room sensible heat-sub total
    2%Duct leakage& 2%R.A.Heat Regain + 4%Safety
    Room Sensible Heat Total
    Room Latent Heat
    Infiltration
    outsideair 0 73.5 0.68
    People 9 255
    Appilances 1.00 1 3413
    Coffe Urn 0
    Food Warmer 0
    0 0
    Vap.Trans 592 0.029
    Room Latent Heat Sub-Total
    Duct leakage& R.A.Heat Regain + Safety
    Room Latent Heat Total
    Room Total Heat (Sensible + Latent)
    Outside Air Heat
    air qty temp diff const
    Sensible 0 20.0 1.08
    hum diff const
    Latent 0 73.5 0.68
    Grand Total Heat SubTotal
    Heat gain% +leak gain%+ hp pump%+dehumpiplos%
    Re- heat
    GRAND TOTAL HEAT
    HP & tons
    Sensible heat factor
    Indicated adp 'f
    Selected adp 'F
    Dehumidifier rise (1-bf)*(rm temp -adp)
    Dehumidified air qty (Cfm) S.heat/(1.08*deh.rise)
    midifying Heat Load Estimate for SUMMER
    CONDITION DB 'F WB 'F
    OUTSIDE 95.0 81.0
    ROOM 75.0
    DIFFERENCE 20.0
    JULY & MAY 10DEG
    GLASS, WALL & PARTITION AREAS (ft2)
    GLASS WALLS
    Btu/hr NORTH
    SOUTH
    - WEST
    - EAST
    - NW 0.0
    - NE 0.0
    - SW 0.0
    - SE
    - OTHER DATA TO BE FILLED
    - AREA 295.90 sft
    ROOF HEIGHT 13 ft
    - FALSE CEILING HT. 13 ft
    - NO OF F.A.CHANGES 15 PER HR.
    - NO. OF PEOPLE 9 0.03
    - Steam 0
    - Brewer 0
    - 0
    - 0
    - LIGHTING LOAD 1.5 W/S. FT
    - EQUIPMENT LOAD 1.0 KW
    2,367 DIVERSITY FACTOR 1
    - SH PER PERSON 255 Btu/hr
    LH PER PERSON 255 Btu/hr
    - BPF 0.1
    3,661 CFM/PERSON 10
    EXHAUST 0
    1,882 FLOOR GAIN 0 (1 if fl. gain exists else 0)
    ROOF(0)/CEILING(1) 1
    - ROOF (1 if Roof provided Insulation
    0.10 - PARTITIONS (1 if Mod.Partitions exists else
    CEILING 296 (1 if Mod.Ceiling Panels exist
    2,264 PRE-COOLING COIL 0 (1 if Pre-cooling/TFA exists el
    1,515 ADP&SHR 0 (1 if ADP & SHR revised else
    853 Motor bkw IF ADP & SHR REVIS
    - SHR 0.64 REV. ESHR
    ADP 49.00 REV. ADP
    - TR 1.96 REV. TR
    - Dehumd. CFM 543 REV. AIR QTY CFM
    - Reheat,KW N/A RE- HEAT IN KWTO INCREASE
    12,541
    10% 1,169 FRESH AIR REQUIREMENT
    13,710 NOS CFM/PER
    PEOPLE 9
    - EXHAUST
    0.10 - NO. OF A/CHANGES
    2,264 TOTAL FRESH AIR
    3,413 Ventilation cfm/ft2 296 0.2
    PRE-COOLING COIL
    - DB 'F WB 'F
    - LEV. COND 56.0 55.9
    1,262 INSIDE 69.0 58.9
    6,938
    10% 694 DIFF. -13.0
    7,632
    21,342 1. SUPPLY AIR TEMP. ( ROOM O/L AIR)
    Trm-( RSH/(1.08 x (De. CFM+CFMoa))
    1 - bf * If above is too high. Determine supply CFM
    0.90 - for desired diff. By supply air qty. formula
    2. ENTERING DRY BULB TEMPERATURE
    0.90 - ( CFM oa x Toa)+(CFMra X Trm)/CFMsa)
    21,342 3. ENTERING AIR MOISTURE CONTENT
    10% 2,134 (CFM oa*Woa+CFM ra*Wrm)/CFM da
    N/A 4. LEAVING DRY BULB TEMPERATURE
    23,477 ( Tadp + (BF(Tedb - T adp)))
    2.44547065 1.96 5. SUPPLY AIR CFM
    0.64 ( RSH/1.08 X (Trm-Tsa)
    49 From psychrometric chart
    51
    23 # when bypassing a mixture of OA & RA use supply CFM, when
    543 bypassing RA only, use deh. CFM

    277.30
    277.30
    RH TH GR/LB
    138.4
    50% 64.9
    0.0 73.5

    REAS (ft2) U' FACTORS


    PARTNS WALL 0.360 11.4 34.2
    161.4 GLASS 0.560 15.96 13.68
    161.4 ALL GLASS 1.130 27.36 47.88
    177.5 PARTITION 0.360
    177.5 M.PARTN 0.150
    CEILING 0.424
    M.CLG.PANL 0.150
    FLOOR 0.424
    ROOF 0.510
    677.9
    The ADP Table 32.56
    FOR 75.0 & 50%RH 9
    SHR ADP 6.375
    1 55.2 0.00 47.935
    0.92 54 0.00
    0.84 52 0.00
    0.78 50 0.00
    0.74 48 0.00
    0.71 46 0.00
    0.69 44 0.00
    0.66 40 34.72
    0.64 34 0.00

    fl. gain exists else 0)

    Roof provided Insulation else 0)


    Mod.Partitions exists else 0)
    Mod.Ceiling Panels exists else 0)
    Pre-cooling/TFA exists else 0)
    ADP & SHR revised else 0)
    IF ADP & SHR REVISED,CONSIDER FOLWG
    0.97
    50
    0.00
    AIR QTY CFM 0
    HEAT IN KWTO INCREASE ADP 0.00

    UIREMENT
    ACH NET (CFM)
    0
    0
    0

    0
    E-COOLING COIL
    RH TH GR/LB
    99.5 23.8 66.7
    1 25.6 58.2

    -1.8 8.5

    51.60 0F
    23.40

    75.00 0F

    64.89 Gr./lb

    51.34 0F

    542.51 0F

    T ewb = F
    0

    T lwb = F
    0

    pply CFM, when


    Cooling and Dehumidifying Heat Load Est
    Estmated By
    Date
    Coustomer
    Location
    Room
    Classification
    AHU Tag No SYSTEM-2
    Item Sun gain Factor
    Solar gain glass
    North 0.0 39 0.56
    South 0.0 14 0.56
    West 0.0 158 0.56
    East 0.0 158 0.56
    NW 0.0 148 0.56
    NE 0.0 148 0.56
    SW 0.0 66 0.56
    SE 0.0 66 0.56
    Solar and trans gain-walls&roof 0.36
    North 0.0 12.0 0.37
    South 0.0 26.0 0.37
    West 0.0 41.0 0.37
    East 0.0 31.0 0.37
    NW 0.0 32.0 0.37
    NE 0.0 24.0 0.37
    SW 0.0 36.0 0.37
    SE 0.0 28.0 0.37
    Roof -Sun 40.0 0.48
    Roof -Sun-Insulated 40.0 0.20
    Roof -Shaded 17.0 0.48
    Transmission gain-except walls & roof
    All glass 0.0 20.0 1.13
    Partition 581.0 15.0 0.36
    Ceiling 215.2 15.0 0.36
    Floor 215.2 15.0 0.42
    Infiltration and Outside air
    Infiltration 20.0 1.08
    Outsideair 32 20.0 1.08 0.10
    Internal Heat
    People 6 255 0
    Lights 215 1.5 3.413
    Equipment 0.88 1 3413
    Appliances 2.00 1 3413
    Coffe Urn 0
    Food Warmer 0
    0 0
    Motor BKW 0.00 1 3413
    Room sensible heat-sub total
    2%Duct leakage& 2%R.A.Heat Regain + 4%Safety 10%
    Room Sensible Heat Total
    Room Latent Heat
    Infiltration
    outsideair 32 73.5 0.68 0.10
    People 6 255
    Appilances 1 3413
    Coffe Urn 0
    Food Warmer 0
    0 0
    Vap.Trans 430 0.029
    Room Latent Heat Sub-Total
    Duct leakage& R.A.Heat Regain + Safety 10%
    Room Latent Heat Total
    Room Total Heat (Sensible + Latent)
    Outside Air Heat
    air qty temp diff const 1 - bf
    Sensible 32 20.0 1.08 0.90
    hum diff const
    Latent 32 73.5 0.68 0.90
    Grand Total Heat SubTotal
    Heat gain% +leak gain%+ hp pump%+dehumpiplos% 10%
    Re- heat
    GRAND TOTAL HEAT
    HP & tons 2.8558926024
    Sensible heat factor
    Indicated adp 'f
    Selected adp 'F
    Dehumidifier rise (1-bf)*(rm temp -adp)
    Dehumidified air qty (Cfm) S.heat/(1.08*deh.rise)

    343.73
    357.86
    ying Heat Load Estimate for SUMMER
    CONDITION DB 'F WB 'F RH
    OUTSIDE 95.0 81.0
    ROOM 75.0 50%
    DIFFERENCE 20.0
    JULY & MAY 10DEG
    GLASS, WALL & PARTITION AREAS (ft2)
    GLASS WALLS PARTNS
    Btu/hr NORTH 161.4
    SOUTH 161.4
    - WEST 129.1
    EAST 129.1
    NW 0.0
    NE 0.0
    - SW 0.0
    - SE
    - OTHER DATA TO BE FILLED 581.0
    - AREA 215.20 sft The ADP Table
    ROOF HEIGHT 13 ft FOR 75.0 & 50%RH
    - FALSE CEILING HT. 13 ft SHR
    - NO OF F.A.CHANGES 15 PER HR. 1
    - NO. OF PEOPLE 6 0.03 0.92
    - Steam 0 0.84
    - Brewer 0 0.78
    - 0 0.74
    - 0 0.71
    - LIGHTING LOAD 1.5 W/S. FT 0.69
    - EQUIPMENT LOAD 1.0 KW 0.66
    - DIVERSITY FACTOR 1 0.64
    - SH PER PERSON 255 Btu/hr
    LH PER PERSON 255 Btu/hr
    BPF 0.1
    3,138 CFM/PERSON 10
    1,162 EXHAUST 0
    1,369 FLOOR GAIN 0 (1 if fl. gain exists else 0)
    ROOF(0)/CEILING(1) 1
    - ROOF (1 if Roof provided Insulation else 0)
    70 PARTITIONS (1 if Mod.Partitions exists else 0)
    CEILING 215 (1 if Mod.Ceiling Panels exists else 0)
    1,646 PRE-COOLING COIL 0 (1 if Pre-cooling/TFA exists else 0)
    1,102 ADP&SHR 0 (1 if ADP & SHR revised else 0)
    3,003 Motor bkw IF ADP & SHR REVISED,CONSIDER FOL
    6,826 SHR 0.87 REV. ESHR
    ADP 49.00 REV. ADP
    - TR 2.28 REV. TR
    - Dehumd. CFM 785 REV. AIR QTY CFM
    - Reheat,KW N/A RE- HEAT IN KWTO INCREASE ADP
    18,316
    1,531 FRESH AIR REQUIREMENT
    19,847 NOS CFM/PER ACH
    PEOPLE 6 5
    - EXHAUST
    161 NO. OF A/CHANGES
    1,646 TOTAL FRESH AIR
    - Ventilation cfm/ft2 215 0.2
    PRE-COOLING COIL
    - DB 'F WB 'F RH
    - LEV. COND 56.0 55.9 99.5
    918 INSIDE 69.0 58.9 1
    2,725
    273 DIFF. -13.0
    2,998
    22,844 1. SUPPLY AIR TEMP. ( ROOM O/L AIR)
    Trm-( RSH/(1.08 x (De. CFM+CFMoa))
    * If above is too high. Determine supply CFM
    628 for desired diff. By supply air qty. formula
    2. ENTERING DRY BULB TEMPERATURE
    1,452 ( CFM oa x Toa)+(CFMra X Trm)/CFMsa)
    24,924 3. ENTERING AIR MOISTURE CONTENT
    2,492 (CFM oa*Woa+CFM ra*Wrm)/CFM da
    N/A 4. LEAVING DRY BULB TEMPERATURE
    27,417 ( Tadp + (BF(Tedb - T adp)))
    2.28 5. SUPPLY AIR CFM
    0.87 ( RSH/1.08 X (Trm-Tsa)
    49 From psychrometric chart T ewb =
    51 T lwb =
    23 # when bypassing a mixture of OA & RA use supply CFM, when
    785 bypassing RA only, use deh. CFM
    TH GR/LB
    138.4
    64.9
    0.0 73.5

    U' FACTORS
    WALL 0.360 11.4 34.2
    GLASS 0.560 15.96 13.68
    ALL GLASS 1.130 27.36 47.88
    PARTITION 0.360
    M.PARTN 0.150
    CEILING 0.424
    M.CLG.PANL 0.150
    FLOOR 0.424
    ROOF 0.510

    The ADP Table 32.56


    FOR 75.0 & 50%RH 9
    ADP 6.375
    55.2 0.00 47.935
    54 52.72
    52 0.00
    50 0.00
    48 0.00
    46 0.00
    44 0.00
    40 0.00
    34 0.00

    sts else 0)

    ded Insulation else 0)


    ions exists else 0)
    g Panels exists else 0)
    g/TFA exists else 0)
    R revised else 0)
    P & SHR REVISED,CONSIDER FOLWG
    0.97
    50
    0.00
    0
    TO INCREASE ADP 0.00

    NET (CFM)
    32
    0
    0

    32
    G COIL
    TH GR/LB
    23.8 66.7
    25.6 58.2

    -1.8 8.5

    52.52 0F
    23.40

    75.79 0F

    73.25 Gr./lb

    51.33 0F

    817.61 0F

    F
    0

    F
    0
    EU5Q
    GS6E
    A4HA
    6F55
    DJHR
    CVSL
    XPFD
    ZZGL
    1ZPV
    UZLX
    Y0ES
    YWWH
    QNZ3
    E6WV
    Z

    You might also like