SIDDHARTHA INSTITUTE OF ENGINEERING & TECHNOLOGY SELF ASSESSMENT

REPORT, Part – B

CRITERION 6 FACILITIES AND TECHNICAL SUPPORT 80

6. FACILITIES AND TECHNICAL SUPPORT (80)

6.1. ADEQUATE AND WELL EQUIPPED LABORATORIES, AND TECHNICAL MANPOWER (30)

CAY (2018-19)

Table B 6.1.A Adequate and well-equipped laboratories, and technical manpower CAY (2018-19)

Weekly
No. of Technical Manpower support
utilization
students
status (all
S. Name of the per Name of the Important
the courses
No. Laboratory setup equipment Name of the technical
for which Designation Qualification
(Batch staff
the lab is
Size)
utilized)
Single phase half
Power
controlled and full Lab
1 Electronics 3 04 sessions G Raghavendra B. Tech
controlled converters, Assistant
104-A
Jones choppers, etc….
Control Systems
Servomotors, Synchros, Lab Diploma in
2 Room No. 3 04 sessions R Raju
etc. Assistant EEE
104-B
CRO, Multimeters,
Networks Lab Diploma in
3 3 Voltmeters, Ammeters, 04 sessions R Srinivasulu Naik
Room No. 108/A Assistant EEE
Trainer kits, etc.
4 Electrical 3 Shunt motor 04 sessions V Sreenu Lab B. Tech
Machines-I ,Shunt Assistant
Room No. EL1 generator
,Compound

SIET-EEE Department
SIDDHARTHA INSTITUTE OF ENGINEERING & TECHNOLOGY SELF ASSESSMENT
REPORT, Part – B
motors,etc
Electrical
Transformers, Induction Lab Diploma In
5 Machines-II 3 04 sessions G Sathyanarayana
Motors, Aletrnators, etc.. Assistant EEE
Room No. EL2A
Bridges, LVDT Trainer,
Electrical
Strain Guage, Energy Lab
6 Measurements 3 04 sessions M Vijayakanth Sagar B. Tech
Meter, Power Factor Assistant
Room No. EL2B
Meter, etc.
Simulation MATLAB, PSPICE Soft Lab Diploma In
7 3 04 sessions V Chennakeshava
Room No. 108-B Ware, 30 computers, etc. Assistant EEE
Electrical CRO , Multimeters,
Lab
8 Technology 3 Voltmeters, Ammeters, 04 sessions K Vishwanath B. Tech
Assistant
Room No. 108 A Trainer kit,
Basic Electrical CRO , Multimeters,
& Electronics Voltmeters, Ammeters, Lab
9 3 04 sessions K Vishwanath Diploma
Engineering Trainer kit, Assistant
Room No. EL3A
Relays ,protection panel
Power Systems schemes of transformer, Lab
10 3 04 sessions K Sai Venkata Kishore B. Tech
Room No. SD7 generator and Assistant
transmission lines
Electrical Bridges, LVDT Trainer,
Measurements & Strain Guage, Energy Lab Diploma in
11 3 04 sessions M Vijayakanth Sagar
Instrumentation Meter ,Power Factor Assistant EEE
Room No. EL2B Meter

SIET-EEE Department
SIDDHARTHA INSTITUTE OF ENGINEERING & TECHNOLOGY SELF ASSESSMENT
REPORT, Part – B

CAYm1 (2017-18)
Table B 6.1.B Adequate and well-equipped laboratories, and technical manpower CAYm1 (2017-18)

Weekly
No. of Technical Manpower support
utilization
students
S. Name of the Name of the status (all the
per setup
No. Laboratory Important equipment courses for Name of the
(Batch Designation Qualification
which the Lab technical staff
Size)
is utilized)
Single phase half
Power Electronics
controlled and full Lab Diploma in
1 Lab 3 04 sessions R Rajesh
controlled converters , Assistant EEE
Room No. 104-A
Jones choppers
Control Systems
Lab Diploma in
2 Lab 3 Servomotors,Synchros 04 sessions R Raju
Assistant EEE
Room No. 104-B
CRO, Millimeters,
Electrical circuits Lab Diploma in
3 3 Voltmeters, Ammeters, 04 sessions R Srinivasulu Naik
Room No. B-108/A Assistant EEE
Trainer kit,
Electrical Shunt motor,
Lab
4 Machines-I 3 shunt generator, 04 sessions V Sreenu B. Tech
Assistant
Room No. EL1 compound motors
Electrical Transformers,
Lab Diploma In
5 Machines-Ii 3 Induction Motors, 04 sessions G Sathyanarayana
Assistant EEE
Room No. EL2A Alternators
Simulation Lab Matlab, Lab Diploma In
6 3 04 sessions V Chennakeshava
Room No. 108-B PSPICE Soft Ware Assistant EEE
Electrical CRO , Multimeters,
Lab
7 Technology 3 Voltmeters, Ammeters, 04 sessions B Renuka B. Tech
Assistant
Room No. 108 A Trainer kit,
8 Electrical 3 Bridges,LVDT 04 sessions B Kishore Lab B. Tech

SIET-EEE Department
SIDDHARTHA INSTITUTE OF ENGINEERING & TECHNOLOGY SELF ASSESSMENT
REPORT, Part – B
Trainer,Strain
Measurements
Guage,Energy Meter Assistant
Room No. EL2B
,Power Factor Meter

CAYm2 (2016-17)

Weekly
No. of Technical Manpower support
utilization
students Name of the
S. Name of the status (all the
per setup Important
No. Laboratory courses for Name of the technical
(Batch equipment Designation Qualification
which the Lab staff
Size)
is utilized)
Power Single phase half
Electronics controlled and full Lab Diploma in
1 3 04 sessions R Rajesh
Lab controlled converters , Assistant EEE
104-A Jones choppers
Control
Systems Lab Lab Diploma in
2 3 Servomotors,Synchros 04 sessions R Raju
Room No. Assistant EEE
104-B
Electrical CRO , Millimeters,
circuits Voltmeters, Lab Diploma in
3 3 04 sessions M Pranesh
Room No. B- Ammeters, Assistant EEE
108/A Trainer kit,
Electrical
Shunt motor
Machines-I Lab Diploma in
4 3 shunt generator, 04 sessions K Mahesh Kumar
Room No. Assistant EEE
compound motors
EL1
5 Electrical 3 Transformers, 04 sessions G Sathyanarayana Lab Diploma In
Machines-Ii Induction Motors, Assistant EEE
Room No. Alternators

SIET-EEE Department
SIDDHARTHA INSTITUTE OF ENGINEERING & TECHNOLOGY SELF ASSESSMENT
REPORT, Part – B

EL2A
Simulation
Matlab, Lab Diploma In
6 Lab Room 3 04 sessions V Chennakeshava
PSPICE Soft Ware Assistant EEE
No. 108-B
Electrical Bridges, LVDT
Measurements Trainer, Strain Guage, Lab Diploma In
7 3 04 sessions B Kishore
Room No. Energy Meter ,Power Assistant EEE
EL2B Factor Meter

Table B 6.1.C Adequate and well-equipped laboratories, and technical manpower CAYm2 (2016-17)

CAYm2 (2015-16)

Weekly Technical Manpower support

No. of
utilization
students
S. Name of the Name of the status (all the
per setup Name of the
No. Laboratory Important equipment courses for Designation Qualification
(Batch technical staff
which the Lab
Size)
is utilized)
Single phase half
Power Electronics
controlled and full Lab Diploma in
1 Lab 3 04 sessions R Rajesh
controlled converters , Assistant EEE
Room No. 104-A
Jones choppers
Control Systems
Lab Diploma in
2 Lab 3 Servomotors,Synchros 04 sessions R Raju
Assistant EEE
Room No. 104-B
CRO , Millimeters,
Electrical circuits Lab Diploma in
3 3 Voltmeters, Ammeters, 04 sessions M Pranesh
Room No. B-108/A Assistant EEE
Trainer kit
4 Electrical 3 Shunt motor, 04 sessions K.Mahesh Lab Diploma in

SIET-EEE Department
SIDDHARTHA INSTITUTE OF ENGINEERING & TECHNOLOGY SELF ASSESSMENT
REPORT, Part – B
Machines-I shunt generator,
Kumar Assistant EEE
Room No. EL1 compound motors
Electrical Transformers
Lab Diploma In
5 Machines-II 3 ,Induction Motors , 04 sessions G Sathyanarayana
Assistant EEE
Room No. EL2A Aletrnators
Bridges, LVDT Trainer,
Electrical
Strain Guage, Energy Lab Diploma In
6 Measurements 3 04 sessions B KISHORE
Meter ,Power Factor Assistant EEE
Room No. EL2B
Meter
Simulation Lab Matlab, PSPICE Soft Lab Diploma In
7 3 04 sessions V Chennakeshava
Room No. 108-B Ware Assistant EEE
Electrical CRO , Multimeters,
Lab Diploma In
8 Technology 3 Voltmeters, Ammeters, 04 sessions K Mahesh Kumar
Assistant EEE
Room No. 108 A Trainer kit,
Basic Electrical &
CRO , Multimeters,
Electronics Lab Diploma IN
9 3 Voltmeters, Ammeters, 04 sessions B Renuka
engineering Assistant EEE
Trainer kit,
Room No. EL3A

Table B 6.1.C Adequate and well-equipped laboratories, and technical manpower CAYm2 (2015-16)

SIET-EEE Department
SIDDHARTHA INSTITUTE OF ENGINEERING & TECHNOLOGY SELF ASSESSMENT
REPORT, Part – B

6.2. ADDITIONAL FACILITIES CREATED FOR IMPROVING THE QUALITY OF LEARNING EXPERIENCE IN
LABORATORIES (25 MARKS)

CAY (2018-19)

Areas in which
students’ are
S. Facility Reason(s) for
Details Utilization expected to Relevance to POs/PSOs
No Name creating facility
have enhanced
learning
To educate students
Transient & with Extra
Electrical
Electrical steady state Knowledge used PO1,PO2,PO3,PO4PO7,PO9,
1 90% Circuits
Circuits RLC Circuit for Electrical and P012, PSO1,PSO2
lLAB
Kit Electronics
engineering
Compound
Motors, Students are
Shunt educated with
Electrical EM I,EM II PO1,PO2,PO3,PO4PO7,PO9,
2 Motors, Adobe suit of 95%
Machines LABS P012, PSO1,PSO2
Generators products and
Starters services
Transformers.

Table B 6.2.A Additional facilities created for improving the quality of learning experience in laboratories CAY (2018-19)

SIET-EEE Department
SIDDHARTHA INSTITUTE OF ENGINEERING & TECHNOLOGY SELF ASSESSMENT
REPORT, Part – B

CAY (2017-18)

Areas in which
students’ are
S. Facility Reason(s) for
Details Utilization expected to Relevance to Pos/PSOs
No Name creating facility
have enhanced
learning
To educate students
Transient &
with Extra
steady state Electrical
Electrical Knowledge used PO1,PO2,PO3,PO4PO7,PO9,
1 RLC Circuit 90% Circuits
Circuits for Electrical and P012,PSO1,PSO2
Kit Harmonic LAB
Electronics
analyzer kit
engineering
Compound
Motors, Students are
Shunt educated with
Electrical EM I,EM II PO1,PO2,PO3,PO4PO7,PO9,
2 Motors, Adobe suit of 95%
Machines LABS P012, PSO1,PSO2
Generators products and
Starters services
Transformers.

Table B 6.2.A Additional facilities created for improving the quality of learning experience in laboratories CAY (2017-18)

SIET-EEE Department
SIDDHARTHA INSTITUTE OF ENGINEERING & TECHNOLOGY SELF ASSESSMENT
REPORT, Part – B

CAY (2016-17)

Areas in which
students’ are
S. Facility Reason(s) for
Details Utilization expected to Relevance to POs/PSOs
No Name creating facility
have enhanced
learning
To educate students
Transient & with Extra
Electrical
Electrical steady state Knowledge used PO1,PO2,PO3,PO4PO7,PO9,
1 90% Circuits
Circuits RLC Circuit for Electrical and P012, PSO1,PSO2
LAB
Kit Electronics
engineering
Compound
Motors, Students are
Shunt educated with
Electrical EM I,EM II PO1,PO2,PO3,PO4PO7,PO9,
2 Motors, Adobe suit of 95%
Machines LAB P012, PSO1,PSO2
Generators products and
Starters services
Transformers.

Table B 6.2.A Additional facilities created for improving the quality of learning experience in laboratories CAY (2016-17)

SIET-EEE Department
SIDDHARTHA INSTITUTE OF ENGINEERING & TECHNOLOGY SELF ASSESSMENT
REPORT, Part – B

Areas in which
students’ are
S. Facility Reason(s) for
Details Utilization expected to Relevance to POs/PSOs
No Name creating facility
have enhanced
learning
To educate students
Transient & with Extra
Electrical steady state Knowledge used Electrical PO1,PO2,PO3,PO4PO7,PO9,
1 90%
Circuits RLC Circuit for Electrical and Circuits P012, PSO1,PSO2
Kit Electronics
engineering
Compound
Motors, Students are
Shunt educated with
Electrical PO1,PO2,PO3,PO4PO7,PO9,
2 Motors, Adobe suit of 95% EM I,EM II
Machines P012,PSO1,PSO2
Generators products and
Starters services
Transformers.

Table B 6.2.A Additional facilities created for improving the quality of learning experience in laboratories CAY (2015-16)

SIET-EEE Department
 SIDDHARTHA INSTITUTE OF ENGINEERING & TECHNOLOGY SELF ASSESSMENT
REPORT, Part – B

6.3. LABORATORIES: MAINTENANCE AND OVERALL AMBIANCE (10)

CAY (2017-18)

EEE Laboratory Maintenance Committee with lab In- charges as its members was formed to address issues such as maintenance and
repairs.

 Maintenance register is maintained in all laboratories.

 Earthling is provided in each laboratory.
 Calibration is done to all the equipment’s.
 As per the requirement minor repairs are carried out by the lab assistant and faculty member.
 Maintenance of computers is taken care by CSE department.

All laboratories are well furnished, having sufficient natural light, good ventilation with tube lights and fan arrangements.

S. No Name of the Laboratory Maintenance and overall ambiance

1 Power Electronics Laboratory The lab is cleaned regularly and maintained neatly.

The lab is cleaned regularly and maintained neatly, availability of Servo controlled
2 Control Systems Laboratory
voltage stabilizer, Equipment servicing and maintenance once in a semester.

Equipment servicing and maintenance once in a semester, The lab is cleaned regularly
3 Networks Laboratory
and maintained neatly.

SIET-EEE Department
SIDDHARTHA INSTITUTE OF ENGINEERING & TECHNOLOGY SELF ASSESSMENT
REPORT, Part – B

Equipment servicing and maintenance once in a semester, The lab is cleaned regularly
4 Electrical Machines-I Laboratory
and maintained neatly.

Equipment servicing and maintenance once in a semester, The lab is cleaned regularly
5 Electrical Machines-Ii Laboratory
and maintained neatly.

The lab is cleaned regularly and maintained neatly, availability of Servo controlled
6 Electrical Measurements Laboratory
voltage stabilizer, equipment servicing and maintenance once in a semester.

7 Basic Simulation Laboratory The lab is cleaned regularly and maintained neatly.

Equipment servicing and maintenance once in a semester, The lab is cleaned regularly
8 Electrical Technology Laboratory
and maintained neatly.

Basic Electrical & Electronics’ Equipment servicing and maintenance once in a semester, The lab is cleaned regularly
9
Laboratory and maintained neatly.

Equipment servicing and maintenance once in a semester, The lab is cleaned regularly
10 Power Systems Laboratory
and maintained neatly.

Electrical Measurements & The lab is cleaned regularly and maintained neatly, equipment servicing and
11
Instrumentation Laboratory maintenance once in a semester.

Table B 6.3.A Laboratories: Maintenance and overall ambiance (Self Explanatory) CAY (2018-19)

SIET-EEE Department
SIDDHARTHA INSTITUTE OF ENGINEERING & TECHNOLOGY SELF ASSESSMENT
REPORT, Part – B

Networks Laboratory Electrical Machines I Laboratory

Electrical Machines II Laboratory

BEE Laboratory

SIET-EEE Department
SIDDHARTHA INSTITUTE OF ENGINEERING & TECHNOLOGY SELF ASSESSMENT
REPORT, Part – B

Power Electronics Laboratory

Simulation Lab

Electrical Measurements Laboratory

Power system laboratory

SIET-EEE Department
SIDDHARTHA INSTITUTE OF ENGINEERING & TECHNOLOGY SELF ASSESSMENT
REPORT, Part – B

Control System Laboratory

CAYm1 (2018-19)

EEE Laboratory Maintenance Committee with lab In-charges as members was formed to address issues such as maintenance and repairs.

 Maintenance register is maintained in the laboratories.

 Earthling is provided in each laboratory.
 Calibration is done to all the equipment’s.
 As per the requirement minor repairs are carried out by the lab assistant and faculty member.
 Maintenance of computers is taken care by CSE department.
 All Laboratories are well furnished, having sufficient natural light, good ventilation with tube lights and fan arrangements.

SIET-EEE Department
SIDDHARTHA INSTITUTE OF ENGINEERING & TECHNOLOGY SELF ASSESSMENT
REPORT, Part – B

S. No Name of the Laboratory Maintenance and overall ambiance

1 Power Electronics Laboratory The lab is cleaned regularly and maintained neatly.

The lab is cleaned regularly and maintained neatly, availability of Servo controlled
2 Control Systems Laboratory
voltage stabilizer, equipment servicing and maintenance once in a semester.

Equipment servicing and maintenance once in a semester, The lab is cleaned

3 Networks Laboratory
regularly and maintained neatly.

Equipment servicing and maintenance once in a semester, The lab is cleaned

4 Electrical Machines-I Laboratory
regularly and maintained neatly.

Equipment servicing and maintenance once in a semester, The lab is cleaned

5 Electrical Machines-Ii Laboratory
regularly and maintained neatly..

The lab is cleaned regularly and maintained neatly, availability of Servo controlled
6 Electrical Measurements Laboratory
voltage stabilizer, equipment servicing and maintenance once in a semester.

7 Basic Simulation Laboratory The lab is cleaned regularly and maintained neatly.

Equipment servicing and maintenance once in a semester, The lab is cleaned

8 Electrical Technology Laboratory
regularly and maintained neatly.

Table B 6.3.B Laboratories: Maintenance and overall ambiance (Self Explanatory) CAYm1 (2017-18)

SIET-EEE Department
SIDDHARTHA INSTITUTE OF ENGINEERING & TECHNOLOGY SELF ASSESSMENT
REPORT, Part – B

Electrical Circuit Laboratory Electrical Machines I Laboratory

BEE Laboratory Electrical Machines II Laboratory

SIET-EEE Department
SIDDHARTHA INSTITUTE OF ENGINEERING & TECHNOLOGY SELF ASSESSMENT
REPORT, Part – B

Power Electronics Laboratory Simulation Lab Laboratory

Electrical Measurements Laboratory Control System Laboratory

SIET-EEE Department
SIDDHARTHA INSTITUTE OF ENGINEERING & TECHNOLOGY SELF ASSESSMENT
REPORT, Part – B
CAYm2 (2017-18)

EEE Laboratory Maintenance Committee with lab in- charges as members was formed to address issues such as maintenance and repairs.

 Maintenance register is maintained in the laboratories.

 Earthling is provided in each laboratory.
 Calibration is done to all the equipments.
 As per the requirement minor repairs are carried out by the lab assistant and faculty member.
 Maintenance of computers is taken care by CSE department.
 All laboratories are well furnished, having sufficient natural light, good ventilation with tube lights and fan arrangements.

S. No Name of the Laboratory Maintenance and overall ambiance

1 Power Electronics Laboratory The lab is cleaned regularly and maintained neatly,.

The lab is cleaned regularly and maintained neatly, availability of Servo controlled
2 Control Systems Laboratory
voltage stabilizer, equipment servicing and maintenance once in a semester.
Equipment servicing and maintenance once in a semester, The lab is cleaned
3 Electrical Circuits Laboratory
regularly and maintained neatly.
Equipment servicing and maintenance once in a semester, The lab is cleaned
4 Electrical Machines-I Laboratory
regularly and maintained neatly.
Equipment servicing and maintenance once in a semester, The lab is cleaned
5 Electrical Machines-Ii Laboratory
regularly and maintained neatly.
The lab is cleaned regularly and maintained neatly, availability of Servo controlled
6 Electrical Measurements Laboratory
voltage stabilizer, equipment servicing and maintenance once in a semester.

SIET-EEE Department
SIDDHARTHA INSTITUTE OF ENGINEERING & TECHNOLOGY SELF ASSESSMENT
REPORT, Part – B

7 Basic Simulation Laboratory The lab is cleaned regularly and maintained neatly.

Equipment servicing and maintenance once in a semester, The lab is cleaned

8 Power Systems Laboratory
regularly and maintained neatly

Table B 6.3.C Laboratories: Maintenance and overall ambiance (Self Explanatory) CAYm2 (2016-17)

Electrical Circuit Laboratory Electrical Machines Laboratory

SIET-EEE Department
SIDDHARTHA INSTITUTE OF ENGINEERING & TECHNOLOGY SELF ASSESSMENT
REPORT, Part – B

BEE Laboratory Control System Laboratory

Power Electronics Laboratory Simulation Lab Laboratory

SIET-EEE Department
SIDDHARTHA INSTITUTE OF ENGINEERING & TECHNOLOGY SELF ASSESSMENT
REPORT, Part – B

Electrical Machines II Laboratory

CAY (2015-16)

EEE Laboratory Maintenance Committee with lab In- charges as its members was formed to address issues such as maintenance and
repairs.

 Maintenance register is maintained in all laboratories.

 Earthling is provided in each laboratory.

 Calibration is done to all the equipments.

 As per the requirement minor repairs are carried out by the lab assistant and faculty member.

 Maintenance of computers is taken care by CSE department.

 All laboratories are well furnished, having sufficient natural light, good ventilation with tube lights and fan arrangements.

SIET-EEE Department
SIDDHARTHA INSTITUTE OF ENGINEERING & TECHNOLOGY SELF ASSESSMENT
REPORT, Part – B

S. No Name of the Laboratory Maintenance and overall ambiance

1 Power Electronics Laboratory The lab is cleaned regularly and maintained neatly,.

The lab is cleaned regularly and maintained neatly, availability of Servo

2 Control Systems Laboratory controlled voltage stabilizer, Equipment servicing and maintenance once in a
semester.
Equipment servicing and maintenance once in a semester, The lab is cleaned
3 Electrical Circuits Laboratory
regularly and maintained neatly.
Equipment servicing and maintenance once in a semester, The lab is cleaned
4 Electrical Machines-I Laboratory
regularly and maintained neatly.
Equipment servicing and maintenance once in a semester, The lab is cleaned
5 Electrical Machines-Ii Laboratory
regularly and maintained neatly.
The lab is cleaned regularly and maintained neatly, availability of Servo
6 Electrical Measurements Laboratory controlled voltage stabilizer, equipment servicing and maintenance once in a
semester.

7 Basic Simulation Laboratory The lab is cleaned regularly and maintained neatly,

Equipment servicing and maintenance once in a semester, The lab is cleaned

8 Electrical Technology Laboratory
regularly and maintained neatly.
Equipment servicing and maintenance once in a semester, The lab is cleaned
9 Basic Electrical & Electronics’ Laboratory
regularly and maintained neatly.

Table B 6.3.A Laboratories: Maintenance and overall ambiance (Self Explanatory) CAY (2015-16)

SIET-EEE Department
SIDDHARTHA INSTITUTE OF ENGINEERING & TECHNOLOGY SELF ASSESSMENT
REPORT, Part – B

Electrical Circuit Laboratory Electrical Machines I Laboratory

BEE Laboratory Electrical Machines II Laboratory

SIET-EEE Department
SIDDHARTHA INSTITUTE OF ENGINEERING & TECHNOLOGY SELF ASSESSMENT
REPORT, Part – B

Power Electronics Laboratory Simulation Lab

SIET-EEE Department
SIDDHARTHA INSTITUTE OF ENGINEERING & TECHNOLOGY SELF ASSESSMENT
REPORT, Part – B
6.4. PROJECT LABORATORY (5 MARKS)

(Mention facilities and Utilization)

CAY (2017-18)

A dedicated Project Lab with internet (100mbps) facility is provided to students to work on their projects. Computers are setup with all
the necessary software like MAT Lab, PSPICE, SCI LAB which can be used in project development.

Weekly utilization Technical Manpower support

S. Name of the Name of the Important status(all the courses
No. Laboratory Equipments for which the Lab is
utilized) Name of the
Designation Qualification
technical staff

1) MAT Lab software

Project Lab Diploma In
1 2) PSPICE 100% V Chennakehava
Laboratory Assistant EEE
3) SCILAB

Table B 6.4.A Project Laboratory CAY (2017-18)

SIET-EEE Department
SIDDHARTHA INSTITUTE OF ENGINEERING & TECHNOLOGY SELF ASSESSMENT
REPORT, Part – B
Best projects for CAY (2017-18)

A dedicated project lab with internet (100mbps) facility is provided to students to work on their projects. The computers are setup with
all the necessary software’s like MAT Lab, PSPICE, SCI LAB which can be used in project development

S. No. Project title Roll No. Name of the student Guide name Relevance to POs& PSOs

Modular cascaded H- 14TP1A0219 RAVURI SANDEEP

Bridge multilevel 14TP1A0226 BOGI JAGADISH
with distributed PO1,PO2,PO3,PO4,PO5,P
1 GUNDALA G SATHISH GOUD
MPPT for grid 14TP1A0231 O7,PO9,P012, PSO1,PSO2
RAJENDER
connected
GOLLABHAVANOLL
applications 15TP5A0216
A SOWJANYA
New modular GAUTAM
14TP1A0229
structure DC-DC PRAYDARSHEE
converter without K V KRISHNA
15TP5A0220 PO1,PO2,PO3,PO4,PO5,P
2 electrolytic SAGAR M SHANKAR
O7,PO9,P012, PSO1,PSO2
capacitors for 15TP5A0213 DEGLUR PANDARI
renewable energy
applications 15TP5A0238 AMDAD SARKAR
14TP1A0220 SARANGI SRIKALA Grid connected PV wind
BLDC motor driven
battery based multi input
solar PV array fed 14TP1A0227 BOJJA DIVYA transformer coupled
3 water pumping G RUPA
15TP5A0203 B PARVATHAMMA bidirectional DC-DC
system employing
converter for household
ZETA converter 15TP5A0225 MOUNIKA KOTAGIRI applications

Table B 6.4.Aa Best three projects of the CAY 2017-18

Best projects for CAYm1 (2016-17)

SIET-EEE Department
SIDDHARTHA INSTITUTE OF ENGINEERING & TECHNOLOGY SELF ASSESSMENT
REPORT, Part – B

Technical Manpower support

Weekly utilization
S. Name of the Name of the Important status(all the courses
No. Laboratory Equipments for which the Lab is
utilized)
Name of the
Designation Qualification
technical staff

Project 1) MATLab software Lab Diploma IN

1 100% V Chennakehava
Laboratory 2) PSPICE Assistant EEE

Table B 6.4.B Project Laboratory CAYm1 (2016-17)

Best projects for CAYm1 (2016-17)

SIET-EEE Department
 SIDDHARTHA INSTITUTE OF ENGINEERING & TECHNOLOGY SELF ASSESSMENT
REPORT, Part – B

S. Name of the
Project title Roll no Guide name Relevance to POs& PSOs
No. student

13TP1A0216 R DIVYA
A fast-converging MPPT technique
13TP1A0217 E BALU
using photovoltaic system under G SATHISH PO1,PO2,PO3,PO4,PO5,PO7,PO9,P012,
1 M KARTHIK
fast varying Solar irradiation and 13TP1A0235 GOUD , PSO1,PSO2
load resistance REDDY
14TP5A0227 P RAMESH
ARAVINDRA
Power factor corrected zeta 13TP1A0204
BARMAN
converter based improved power PO1,PO2,PO3,PO4,PO5,PO7,PO9,P012,
2 13TP1A0226 K MANOJ S NARESH
Quality switched mode power PSO1,PSO2
supply A SHRAVAN
14TP5A0201
KUMAR
14TP5A0214 G SAI KUMAR
A transformer less DC-DC
M PO1,PO2,PO3,PO4,PO5,PO7,PO9,P012,
3 converter with large voltage ratio 14TP5A0220 K MOHAN
NAGARAJU PSO1,PSO2
for MV DC grids
14TP5A0232 S RAJENDER

Table B 6.4.Bb Best three projects of the CAYm1 2016-2017

CAYm2 (2015-16)

SIET-EEE Department
SIDDHARTHA INSTITUTE OF ENGINEERING & TECHNOLOGY SELF ASSESSMENT
REPORT, Part – B

A dedicated project lab with internet(100mbps) facility is provided to students to work for their projects. Computers are setup with all the
necessary softwares like MATLab, PSPICE, SCILAB which can be used in project development.

Best projects for CAYm1 2015-16

Technical Manpower support

Weekly utilization
S. Name of the status(all the
Name of the Important Equipments
No. Laboratory courses for which
the lab is utilized) Name of the
Designation Qualification
technical staff

1) MATLab software
Project Lab Diploma In
1 2) PSPICE 100% V Chennakehava
Laboratory Assistant EEE
3) SCI lab

Table B 6.4.C Best three projects of the CAYm1 2015-16

Best projects for CAYm1 (2015-16)

SIET-EEE Department
 SIDDHARTHA INSTITUTE OF ENGINEERING & TECHNOLOGY SELF ASSESSMENT
REPORT, Part – B

S. Project title Roll no Name of the student Guide name Relevance to POs& PSOs
No.
12TP1A0228 K RAKESH
Control structure for
single phase stand -alone 12TP1A0202 A SHIRISHA N PO1,PO2,PO3,PO4,PO5,PO7,PO9,
1
wind based energy 12TP1A0225 J NANDINI NIREEKSHAN P012,PSO1,PSO2
sources
12TP1A0274 V AVINASH BABU

Control of improved 12TP1A0257 P KOTESWAR

full-bridge three level 12TP1A0254 P CHARAN KUMAR PO1,PO2,PO3,PO4,PO5,PO7,PO9,
2 DC/DC converter for S RAJESH
12TP1A0252 N SUGUNAIAH P012, PSO1,PSO2
wind turbines in a DC
Grid 12TP1A0230 K SATHYANARAYANA
13TP5A0229 L ARUNA
Advanced control of
series voltage 13TP5A0231 M SRI LATHA PO1,PO2,PO3,PO4,PO5,PO7,PO9,
3 M SHANKAR
compensation to enhance 13TP5A0222 K MAHESH P012, PSO1,PSO2
wind turbine ride
13TP5A0238 R.NARSIMHA REDDY

Table B 6.4.Bb Best three projects of the CAYm1 2015-2016

6.5. SAFETY MEASURES IN LABORATORIES (10)

SIET-EEE Department
SIDDHARTHA INSTITUTE OF ENGINEERING & TECHNOLOGY SELF ASSESSMENT
REPORT, Part – B

S. No. Name of the Laboratory SAFETY MEASURES

1 Power Electronics Laboratory 1.General safety guidelines :

2 Control Systems Laboratory  Rubber mats are available in all laboratories.

3 Networks Laboratory  Wear aprons in the laboratories.
 Earthing is provided in each laboratory.
Electrical Machines-I
4  System log book maintained. The students are prevented to install or download any
Laboratory
software or modify or delete any system files on any lab computers.
Electrical Machines-Ii
5
Laboratory  General rules of conduct in laboratories are displayed. Specific safety rules for
students displayed. First aid box, Fire extinguishers are kept in the laboratory.
Electrical Measurements
6 Maintain a clean and organized laboratory, avoiding the use of cell phones.
Laboratory
 The students are not allowed to connect or disconnect any plug or cable without
7 Basic Simulation Laboratory lecturer/laboratory technician’s permission.
Electrical Technology • All users of the laboratory are to follow the directions of Academic assistant /
8
Laboratory Laboratory technician / Staff member.
Basic Electrical & Electronics • Students should not attempt to repair, open, tamper or interfere with any of the
9
Laboratory computer, printing, cabling, air conditioning or other equipment in the laboratory.
10 Power Systems Laboratory

SIET-EEE Department
SIDDHARTHA INSTITUTE OF ENGINEERING & TECHNOLOGY SELF ASSESSMENT
REPORT, Part – B

Electrical Measurements &

11
Instrumentation Laboratory • Students should be aware of office ergonomic guidelines for correct posture when
using hardware equipment.
• Please treat fellow users of the laboratory, and all equipment within the laboratory,
with the appropriate level of care and respect.
• Turn off the machine once you are not using it.
• Do not plug in external devices without scanning them for computer viruses.

2. DO’S:

• Know the location of the first aid box and the fire extinguisher and how to use them
in case of an emergency.
• Read and understand how to carry out an experiment thoroughly before coming to the
Table B 6.5.A Safety measures in laboratories CAY (2018-19)

S. No. Name of the Laboratory SAFETY MEASURES

1 Power Electronics Laboratory 1.General safety guidelines :

2 Control Systems Laboratory
 Rubber mats are available in all laboratories.

SIET-EEE Department
SIDDHARTHA INSTITUTE OF ENGINEERING & TECHNOLOGY SELF ASSESSMENT
REPORT, Part – B

3 Networks Laboratory
4 Electrical Machines-I Laboratory
5 Electrical Machines-Ii Laboratory
6 Electrical Measurements Laboratory
7 Basic Simulation Laboratory

 Wear aprons in the laboratories.

 Earthing is provided in each laboratory.
 System log book maintained The students are prevented to install or download
8 Electrical Technology Laboratory any software or modify or delete any system files on any lab computers.
 General rules of conduct in laboratories are displayed. Specific safety rules for
students displayed. First aid box, Fire extinguishers are kept in the laboratory.
Maintain a clean and organized laboratory, avoiding the use of cell phones.
 The students are not allowed to connect or disconnect any plug or cable without
lecturer/laboratory technician’s permission.
• All users of the laboratory are to follow the directions of Academic assistant /
Laboratory technician / Staff member.
Table B 6.5.B Safety measures in laboratories CAYm1 (2017-18)

S. No. Name of the Laboratory SAFETY MEASURES

1 Power Electronics Laboratory 1.General safety guidelines :

 Rubber mats are available in all laboratories.
2 Control Systems Laboratory  Wear aprons in the laboratories.
3 Electrical Circuits Laboratory  Earthling is provided in each laboratory.

SIET-EEE Department
SIDDHARTHA INSTITUTE OF ENGINEERING & TECHNOLOGY SELF ASSESSMENT
REPORT, Part – B

4 Electrical Machines-I Laboratory

5 Electrical Machines-Ii Laboratory
6 Electrical Measurements Laboratory

 System log book maintained The students are prevented to install or download
any software or modify or delete any system files on any lab computers.
7 Basic Simulation Laboratory  General rules of conduct in laboratories are displayed. Specific safety rules for
students displayed. First aid box, Fire extinguishers are kept in the laboratory.
Maintain a clean and organized laboratory, avoiding the use of cell phones.
 The students are not allowed to connect or disconnect any plug or cable without
lecturer/laboratory technician’s permission.
• All users of the laboratory are to follow the directions of Academic assistant /
Laboratory technician / Staff member.
• Students should not attempt to repair, open, tamper or interfere with any of the
computer, printing, cabling, air conditioning or other equipment in the laboratory.
• Students should be aware of office ergonomic guidelines for correct posture when
Table B 6.5.C Safety measures in laboratories CAYm2 (2016-17)

S. No. Name of the Laboratory Safety measures

1 Power Electronics Laboratory 1.General safety guidelines :

2 Control Systems Laboratory
 Rubber mats are available in all laboratories.

SIET-EEE Department
SIDDHARTHA INSTITUTE OF ENGINEERING & TECHNOLOGY SELF ASSESSMENT
REPORT, Part – B

3 Electrical Circuits Laboratory

4 Electrical Machines-I Laboratory

5 Electrical Machines-Ii Laboratory

6 Electrical Measurements Laboratory

7 Basic Simulation Laboratory

8 Electrical Technology Laboratory

Basic Electrical & Electronics
Laboratory
 Wear aprons in the laboratories.
 Earthing is provided in each laboratory.
 System log book maintained The students are prevented to install or download
any software or modify or delete any system files on any lab computers.
9  General rules of conduct in laboratories are displayed. Specific safety rules for
students displayed. First aid box, Fire extinguishers are kept in the laboratory.
Maintain a clean and organized laboratory, avoiding the use of cell phones.
 The students are not allowed to connect or disconnect any plug or cable without
lecturer/laboratory technician’s permission.
• All users of the laboratory are to follow the directions of Academic assistant /
Laboratory technician / Staff member.

Table B 6.5.B Safety measures in laboratories CAYm1 (2015-16)

SIET-EEE Department