Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 143 views

    41 CR 4

    Uploaded by

    Dewi Lanjarsari Purnama Sastri
    This document provides information on the steel grade 41Cr4, including: - It is a quenching and tempering steel recommended for lower strength components, suitable for induction hardening to a minimum hardness of 52 HRC. - The chemical composition, mechanical properties, transformation temperatures, and heat treatment recommendations. - Typical values for other properties like modulus of elasticity, thermal conductivity, and electrical resistivity. - Contact information for Ovako, the manufacturer of 41Cr4 steel.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    41 CR 4

    Uploaded by

    Dewi Lanjarsari Purnama Sastri
    143 views2 pages
    This document provides information on the steel grade 41Cr4, including: - It is a quenching and tempering steel recommended for lower strength components, suitable for induction hardening to a minimum hardness of 52 HRC. - The chemical composition, mechanical properties, transformation temperatures, and heat treatment recommendations. - Typical values for other properties like modulus of elasticity, thermal conductivity, and electrical resistivity. - Contact information for Ovako, the manufacturer of 41Cr4 steel.

    Original Description:

    Deskripsi

    Original Title

    41Cr4

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information on the steel grade 41Cr4, including: - It is a quenching and tempering steel recommended for lower strength components, suitable for induction hardening to a minimum hardness of 52 HRC. - The chemical composition, mechanical properties, transformation temperatures, and heat treatment recommendations. - Typical values for other properties like modulus of elasticity, thermal conductivity, and electrical resistivity. - Contact information for Ovako, the manufacturer of 41Cr4 steel.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    143 views2 pages

    41 CR 4

    Uploaded by

    Dewi Lanjarsari Purnama Sastri
    This document provides information on the steel grade 41Cr4, including: - It is a quenching and tempering steel recommended for lower strength components, suitable for induction hardening to a minimum hardness of 52 HRC. - The chemical composition, mechanical properties, transformation temperatures, and heat treatment recommendations. - Typical values for other properties like modulus of elasticity, thermal conductivity, and electrical resistivity. - Contact information for Ovako, the manufacturer of 41Cr4 steel.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Material data sheet 41Cr4 +HH, 5155

    Steel grade Last revised: Wed, 06 Mar 2019 14:06:55 GMT

    41Cr4 All

    General Information
    41Cr4 is a steel for quenching and tempering recommended for components with strength requirements lower than the steel 42CrMo4. It is suitable
    for induction surface hardening, min hardness 52 HRC. It through hardens in oil up to appr. 40 mm diameter.

    For additional Heat Treatment Data, please visit the Heat Treatment Guide

    Similar designations
    41CrS4, SS2245, 530M40, 530H40, EN18, SCR440, 42C4, 1.7035, 1.7039

    Chemical composition
    Variant Cast Di C% Si % Mn % P% S% Cr %
    Min 0.38 - 0.60 - 0.020 0.90
    5515 CC 4.4
    Max 0.45 0.40 0.90 0.025 0.035 1.20

    Mechanical Properties
    Dimension Yield strength min Tensile strength Elongation A5 Reduction of area Zmin Impact (ISO-V)
    Variant Condition Format Hardness
    [mm] [MPa] [MPa] [%] [%] strengthmin
    Round
    +A 20 < 160 - - - - < 241 HB -
    bar
    Round
    5515 20 < 40 660* 900-1100 12 35 - 20 °C 35 J (long)
    bar
    +QT
    Round
    40.1 < 100 560* 800-950 14 40 - 20 °C 35 J (long)
    bar
    Rp0.2 * Reh, ** Rel

    Transformation temperatures
    Temperature °C
    MS 320
    AC1 735
    AC3 790

    Heat treatment recommendations


    Treatment Condition Temperature cycle Cooling/quenching
    Soft annealing +A 670- 710oC In air

    Austenizing 830 - 860oC


    Quench & Tempering +QT Water or oil
    Tempering 540 - 680oC
    60

    55

    50
    Hardness [HRC]

    45

    40

    35

    30

    25

    10 20 30 40 50

    Distance [mm]
    41Cr(S)4 + HH max 41Cr(S)4 + HH min

    Other properties (typical values)


    Youngs module (GPa) Poisson´s ratio (-) Shear module (GPa) Density (kg/m3)
    210 0.3 80 7800
    Average CTE 20-300°C Specific heat capacity 50/100°C Thermal conductivity Ambient Electrical resistivityAmbient temperature
    (µm/m°K) (J/kg°K) temperature (W/m°K) (µΩm)
    12 460 - 480 40 - 45 0.20 - 0.25

    Contact us
    Would you like to know more about our offers? Don´t hesitate to contact us:
    Via e-mail: info@ovako.com
    Via telephone: +46 8 622 1300
    For more detailed information please visit http://www.ovako.com/en/Contact-Ovako/

    Disclaimer
    The information in this document is for illustrative purposes only. The data and examples are only general recommendations and not a warranty or a guarantee.
    The suitability of a product for a specific application can be confirmed only by Ovako once given the actual conditions.The purchaser of an Ovako product has
    the responsibility to ascertain and control the applicability of the products before using them. Continuous development may necessitate changes in technical
    data without notice. This document is only valid for Ovako material. Other material, covering the same international specifications, does not necessarily comply
    with the properties presented in this document.

    You might also like