Low-Cost, Mono, 1.4W BTL Audio Power Amplifiers: General Description Features
Low-Cost, Mono, 1.4W BTL Audio Power Amplifiers: General Description Features
Low-Cost, Mono, 1.4W BTL Audio Power Amplifiers: General Description Features
KIT
ATION
EVALU BL E
AVAILA
MAX9716/MAX9717
The MAX9716/MAX9717 audio power amplifiers are ideal o 2.7V to 5.5V Single-Supply Operation
for portable audio devices with internal speakers. A o 1.4W into 4Ω at 1% THD+N
bridge-tied load (BTL) architecture minimizes external
component count, while providing high-quality audio o 10nA Low-Power Shutdown Mode
reproduction. Both devices deliver 1.4W continuous o 73dB PSRR at 1kHz
power into a 4Ω load with less than 1% Total Harmonic o No Audible Clicks or Pops at Power-Up/Down
Distortion (THD) while operating from a single +5V sup-
ply. With an 8Ω load, both devices deliver 1W continuous o Internal Fixed Gain to Reduce Component Count
power. These devices also deliver 350mW continuous (MAX9717B/C/D)
power into an 8Ω load while operating from a single o Adjustable Gain Option (MAX9716/MAX9717A)
+3.0V supply. The devices are available as adjustable
o BTL /SE Input Senses when Headphones are
gain amplifiers (MAX9716/MAX9717A) or with internally
Connected (MAX9717)
fixed gains of 6dB, 9dB, and 12dB (MAX9717B/
MAX9717C/MAX9717D), reducing component count. o Pin Compatible with LM4890 (MAX9716)
A low-power shutdown mode disables the bias generator o Pin Compatible with TPA711 (MAX9717A)
and amplifiers, reducing quiescent current consumption o Available in Compact, Thermally Enhanced µMAX
to less than 10nA. These devices feature Maxim’s and TDFN (3mm x 3mm) Packages
industry-leading, comprehensive click-and-pop sup-
pression that reduces audible clicks and pops during
startup and shutdown.
Ordering Information
The MAX9717 features a headphone sense input (BTL/SE) PART TEMP RANGE
PIN- GAIN
that senses when a headphone is connected to the PACKAGE (dB)
device, disables the BTL slave driver, muting the speaker MAX9716ETA+T -40°C to +85°C 8 TDFN-EP* Adj.
while driving the headphone as a single-ended load.
MAX9716EBL+TG45 -40°C to +85°C 3 x 3 UCSP Adj.
The MAX9716 is pin compatible with the LM4890 and is
MAX9716EUA -40°C to +85°C 8 µMAX-EP* Adj.
available in 9-bump UCSP™, 8-pin TDFN (3mm x
3mm), and 8-pin µMAX® packages. The MAX9717 is MAX9716EUA/V+ -40°C to +85°C 8 µMAX-EP* Adj.
available in 9-bump UCSP, 8-pin TDFN, and 8-pin *EP = Exposed pad.
µMAX packages. Both devices operate over the -40°C +Denotes a lead(Pb)-free/RoHS-compliant package.
to +85°C extended temperature range. G45 indicates protective die coating.
/V denotes automotive qualified part.
Applications Ordering Information continued at end of data sheet.
Mobile Phones Portable Devices
Pin Configurations and Selector Guide appear at end of data
PDAs sheet.
BIAS BIAS
MAX9716 MAX9717B/C/D
IN- IN-
BTL/SE
VCC
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim's website at www.maxim-ic.com.
Low-Cost, Mono, 1.4W BTL Audio
Power Amplifiers
ABSOLUTE MAXIMUM RATINGS
MAX9716/MAX9717
Supply Voltage (VCC to GND) ..................................-0.3V to +6V Operating Temperature Range ..........................-40°C to +85°C
Any Other Pin to GND ...............................-0.3V to (VCC + 0.3V) Maximum Junction Temperature ....................................+150°C
IN_, BIAS, SHDN, BTL/SE Continuous Current...................20mA Storage Temperature Range .............................-65°C to +150°C
OUT_ Short-Circuit Duration to GND or VCC (Note 1)...Continuous Lead Temperature (soldering, 10s) .................................+300°C
Continuous Power Dissipation (TA = +70°C) Soldering Temperature (reflow)
8-Pin TDFN (derate 24.4mW/°C above +70°C) .........1951mW Lead(Pb)-Free Packages..............................................+260°C
8-Pin µMAX (derate 10.3mW/°C above +70°C) ...........825mW Packages Containing Lead(Pb)....................................+240°C
9-Bump UCSP (derate 5.2mW/°C above 70°C) ...........412mW
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
Output Offset Voltage VOS VIN- = VOUT+, VIN+ = VBIAS (Note 5) ±7 ±15 mV
2 _______________________________________________________________________________________
Low-Cost, Mono, 1.4W BTL Audio
Power Amplifiers
ELECTRICAL CHARACTERISTICS—5V Supply (continued)
MAX9716/MAX9717
(VCC = 5V, VGND = 0V, SHDN = VCC, TA = +25°C. CBIAS = 1µF, RIN = RF = 20kΩ (MAX9716/MAX9717A), IN+ = BIAS (MAX9716),
BTL/SE = GND (MAX9717_), RL = ∞ connected between OUT+ and OUT-. Typical values are at TA = +25°C.) (Note 2)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
Output Short-Circuit Current Limit ISC (Note 9) 1.1 A
Thermal Shutdown Threshold +160 °C
Thermal Shutdown Hysteresis 15 °C
Power-Up/Enable from Shutdown 250
tPU ms
Time (Note 10) CBIAS = 0.1µF 25
Shutdown Time tSHDN 5 µs
Input Resistance RIN MAX9717B/C/D 12 20 28 kΩ
Output Offset Voltage VOS VIN- = VOUT+, VIN+ = VBIAS (Note 5) ±7 ±15 mV
_______________________________________________________________________________________ 3
Low-Cost, Mono, 1.4W BTL Audio
Power Amplifiers
ELECTRICAL CHARACTERISTICS—3V Supply (continued)
MAX9716/MAX9717
(VCC = 3V, VGND = 0V, SHDN = VCC, TA = +25°C. CBIAS = 1µF, RIN = RF = 20kΩ (MAX9716/MAX9717A), IN+ = BIAS (MAX9716),
BTL/SE = GND (MAX9717_), RL = ∞ connected between OUT+ and OUT-. Typical values are at TA = +25°C.) (Note 2)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
Output Short-Circuit Current Limit ISC (Note 9) 1.1 A
Thermal Shutdown Threshold +160 °C
Thermal Shutdown Hysteresis 15 °C
Power-Up/Enable from Shutdown 250
tPU ms
Time (Note 10) CBIAS = 0.1µF 25
Shutdown Time tSHDN 5 µs
Input Resistance RIN MAX9717B/C/D 12 20 28 kΩ
Note 1: Continuous power dissipation must also be observed.
Note 2: All specifications are tested at TA = +25°C. Specifications over temperature (TA = TMIN to TMAX) are not production tested,
and guaranteed by design.
Note 3: Quiescent power-supply current is specified and tested with no load. Quiescent power-supply current depends on the off-
set voltage when a practical load is connected to the amplifier.
Note 4: Common-mode bias voltage is the voltage on BIAS and is nominally VCC/2.
Note 5: VOS = VOUT+ - VOUT-.
Note 6: The amplifier input IN- is AC-coupled to GND through CIN.
Note 7: Output power is specified by a combination of a functional output current test and characterization analysis.
Note 8: Measurement bandwidth for THD+N is 22Hz to 22kHz.
Note 9: Extended short-circuit conditions result in a pulsed output.
Note 10: Time for VOUT to rise to 50% of final DC value.
4 _______________________________________________________________________________________
Low-Cost, Mono, 1.4W BTL Audio
Power Amplifiers
Typical Operating Characteristics
MAX9716/MAX9717
(VCC = 5V, THD+N measurement bandwidth = 22Hz to 22kHz, BTL mode, TA = +25°C, unless otherwise noted.)
MAX9716 toc02
MAX9716 toc03
MAX9716 toc01
VCC = 5V VCC = 5V VCC = 3V
RL = 8Ω RL = 8Ω RL = 8Ω
10 AV = 6dB THD+N (%) 10 AV = 12dB 10 AV = 6dB
THD+N (%)
THD+N (%)
1 1 1
0.1 OUTPUT POWER = 800mW 0.1 OUTPUT POWER = 800mW 0.1 OUTPUT POWER = 250mW
MAX9716 toc06
MAX9716 toc04
THD+N (%)
THD+N (%)
1 1 1
TOTAL HARMONIC DISTORTION TOTAL HARMONIC DISTORTION TOTAL HARMONIC DISTORTION PLUS
PLUS NOISE vs. FREQUENCY PLUS NOISE vs. FREQUENCY NOISE vs. FREQUENCY (SINGLE-ENDED)
100 100 100
MAX9716 toc07
MAX9716 toc08
MAX9716 toc09
1
THD+N (%)
THD+N (%)
THD+N (%)
1 1
0.1
OUTPUT POWER = 350mW OUTPUT POWER = 350mW OUTPUT POWER = 125mW
0.1 0.1
0.01
_______________________________________________________________________________________ 5
Low-Cost, Mono, 1.4W BTL Audio
Power Amplifiers
Typical Operating Characteristics (continued)
MAX9716/MAX9717
(VCC = 5V, THD+N measurement bandwidth = 22Hz to 22kHz, BTL mode, TA = +25°C, unless otherwise noted.)
TOTAL HARMONIC DISTORTION PLUS TOTAL HARMONIC DISTORTION PLUS TOTAL HARMONIC DISTORTION PLUS
NOISE vs. OUTPUT POWER NOISE vs. OUTPUT POWER NOISE vs. OUTPUT POWER
100 100 100
MAX9716 toc10
MAX9716 toc11
MAX9716 toc12
VCC = 5V VCC = 5V VCC = 3V
RL = 8Ω RL = 8Ω RL = 8Ω
10 AV = 6dB 10 AV = 12dB 10 AV = 6dB
THD+N (%)
THD+N (%)
THD+N (%)
1 1 1
fIN = 10kHz
fIN = 100Hz fIN = 10kHz fIN = 100Hz fIN = 10kHz
0.1 0.1 0.1
TOTAL HARMONIC DISTORTION PLUS TOTAL HARMONIC DISTORTION PLUS TOTAL HARMONIC DISTORTION PLUS
NOISE vs. OUTPUT POWER NOISE vs. OUTPUT POWER NOISE vs. OUTPUT POWER
100 100 100
MAX9716 toc13
MAX9716 toc14
MAX9716 toc15
VCC = 3V VCC = 5V VCC = 5V
RL = 8Ω RL = 4Ω RL = 4Ω
10 AV = 12dB 10 AV = 6dB 10 AV = 12dB
THD+N (%)
THD+N (%)
THD+N (%)
1 1 1
fIN = 100Hz fIN = 10kHz fIN = 10kHz
fIN = 10kHz
0.1 0.1 0.1
TOTAL HARMONIC DISTORTION PLUS TOTAL HARMONIC DISTORTION PLUS TOTAL HARMONIC DISTORTION PLUS NOISE
NOISE vs. OUTPUT POWER NOISE vs. OUTPUT POWER vs. OUTPUT POWER (SINGLE-ENDED)
100 100 100
MAX9716 toc16
MAX9716 toc18
MAX9716 toc17
fIN = 1kHz
THD+N (%)
THD+N (%)
THD+N (%)
1 1 1
fIN = 10kHz
fIN = 1kHz fIN = 1kHz fIN = 10kHz
fIN = 10kHz
0.1 0.1 0.1
6 _______________________________________________________________________________________
Low-Cost, Mono, 1.4W BTL Audio
Power Amplifiers
Typical Operating Characteristics (continued)
MAX9716/MAX9717
(VCC = 5V, THD+N measurement bandwidth = 22Hz to 22kHz, BTL mode, TA = +25°C, unless otherwise noted.)
MAX9716 toc21
MAX9716 toc20
RL = 8Ω RL = 4Ω VCC = 5V
f = 1kHz f = 1kHz f = 1kHz
1.5 AV = 6dB 2.5 AV = 6dB AV = 6dB
2.0
1.2 2.0
THD+N = 10% THD+N = 10% 1.5
THD+N = 10%
0.9 1.5
1.0
0.6 1.0
THD+N = 1% THD+N = 1%
THD+N = 1%
0.5
0.3 0.5
0 0 0
2.5 3.0 3.5 4.0 4.5 5.0 5.5 2.5 3.0 3.5 4.0 4.5 5.0 5.5 1 10 100
SUPPLY VOLTAGE (V) SUPPLY VOLTAGE (V) LOAD RESISTANCE (Ω)
MAX9716 toc23
MAX9716 toc24
VCC = 3V VCC = 5V VCC = 3V
600 f = 1kHz RL = 8Ω RL = 8Ω
AV = 6dB f = 1kHz 250 f = 1kHz
0.8
POWER DISSIPATION (mW)
POWER DISSIPATION (W)
AV = 6dB AV = 6dB
OUTPUT POWER (mW)
500
200
0.6
400
THD+N = 10% 150
300
0.4
100
200 THD+N = 1%
0.2
100 50
0 0 0
1 10 100 0 0.3 0.6 0.9 1.2 1.5 0 100 200 300 400 500
LOAD RESISTANCE (Ω) OUTPUT POWER (W) OUTPUT POWER (mW)
MAX9716 toc26
AV = 6dB AV = 6dB
500
400
1.2
400
300
300
0.8
200
200
0.4
100 100
0 0 0
0 0.4 0.8 1.2 1.6 2.0 0 100 200 300 400 500 600 700 100 1k 10k 100k
OUTPUT POWER (W) OUTPUT POWER (mW) FREQUENCY (Hz)
_______________________________________________________________________________________ 7
Low-Cost, Mono, 1.4W BTL Audio
Power Amplifiers
Typical Operating Characteristics (continued)
MAX9716/MAX9717
(VCC = 5V, THD+N measurement bandwidth = 22Hz to 22kHz, BTL mode, TA = +25°C, unless otherwise noted.)
MAX9716 toc30
MAX9716 toc28
MAX9716 toc29
AV = 60dB
90 -10 5.5
60 -20 5.0
-30 4.5
30
PSRR (dB)
-40
0 4.0
-50
-30 3.5
-60
-60 3.0
-70
-90 -80 2.5
SUPPLY CURRENT
vs. TEMPERATURE COMING OUT OF SHUTDOWN GOING INTO SHUTDOWN
MAX9716 toc32 MAX9716 toc33
6
MAX9716 toc31
SHDN RL = 8Ω
RL = 8Ω
2V/div
5
VCC = 5V
SUPPLY CURRENT (mA)
OUT+ SHDN
4 1V/div 2V/div
OUT-
VCC = 3V
1V/div
OUT+
3
1V/div
OUT-
1V/div
2
OUT+ - OUT- OUT+ - OUT-
200mV/div 200mV/div
1
-40 -15 10 35 60 85 100ms/div 10µs/div
TEMPERATURE (°C)
SHUTDOWN CURRENT
SHUTDOWN CURRENT vs. VCC vs. TEMPERATURE
20 40
MAX9716 toc34
MAX9716 toc35
18
35
16
SHUTDOWN CURRENT (nA)
30
14
12 25
10 20
VCC = 5V
8
15
6
10
4 VCC = 3V
2 5
0 0
2.5 3.0 3.5 4.0 4.5 5.0 5.5 -40 -15 10 35 60 85
VCC (V) TEMPERATURE (°C)
8 _______________________________________________________________________________________
Low-Cost, Mono, 1.4W BTL Audio
Power Amplifiers
Pin/Bump Description
MAX9716/MAX9717
PIN BUMP
TDFN/µMAX UCSP NAME FUNCTION
MAX9716 MAX9717 MAX9716 MAX9717
1 1 C3 C3 SHDN Active-Low Shutdown
DC Bias Bypass Capacitor Connection. Bypass BIAS to ground with a
2 2 C1 C1 BIAS
1µF capacitor.
3 — A3 — IN+ Noninverting Input
4 4 A1 A1 IN- Inverting Input
5 5 A2 A2 OUT+ Bridge Amplifier Positive Output
6 6 B3 B3 VCC Power Supply. Bypass VCC with a 1µF capacitor to ground.
7 7 B1, B2 B1, B2 GND Ground
Bridge Amplifier Negative Output. OUT- becomes high-impedance
8 8 C2 C2 OUT-
when BTL/SE is driven high.
BTL/Single-Ended Mode Input. Logic low sets the device in BTL mode.
— 3 — A3 BTL/SE
Logic high sets the device in single-ended mode.
— — — — EP Exposed Pad (TDFN and µMAX Only). Connect EP to GND.
_______________________________________________________________________________________ 9
Low-Cost, Mono, 1.4W BTL Audio
Power Amplifiers
Power Dissipation and Heat Sinking
MAX9716/MAX9717
2
Fixed Gain
V The MAX9717B, MAX9717C, and MAX9717D feature
POUT = RMS
RL internally fixed gains of 6dB, 9dB, and 12dB, respec-
tively (see the Selector Guide). Fixed gain simplifies
There is no net DC voltage across the load because the designs, reduces pin count, decreases required foot-
differential outputs are each biased at midsupply. This print size, and eliminates external gain-setting resistors.
eliminates the need for DC-blocking capacitors Resistors R IN and R F shown in the MAX9717B/C/D
required for single-ended amplifiers. These capacitors Typical Operating Circuit are used to achieve each
can be large and expensive, consume board space, fixed gain.
and degrade low-frequency performance.
10 ______________________________________________________________________________________
Low-Cost, Mono, 1.4W BTL Audio
Power Amplifiers
Output-Coupling Capacitor
MAX9716/MAX9717
The MAX9717 require output-coupling capacitors to
operate in single-ended (headphone) mode. The out-
BIAS put-coupling capacitor blocks the DC component of the
OUT-
amplifier output, preventing DC current from flowing to
IN+ the load. The output capacitor and the load impedance
MAX9716
OUT+ form a highpass filter with a -3dB point determined by:
CIN RIN
AUDIO IN-
INPUT 1
f−3dB =
2πRLCOUT
RF
As with the input capacitor, choose COUT such that
f-3dB is well below the lowest frequency of interest.
Setting f-3dB too high affects the amplifier’s low-fre-
Figure 2. Setting the MAX9716/MAX9717A Gain quency response. Load impedance is a concern when
choosing COUT. Load impedance can vary, changing
Adjustable Gain the -3dB point of the output filter. A lower impedance
Gain-Setting Resistors increases the corner frequency, degrading low-fre-
External feedback resistors set the gain of the quency response. Select COUT such that the worst-
MAX9716 and MAX9717A. Resistors RF and RIN (see case load/C OUT combination yields an adequate
Figure 2) set the gain of the amplifier as follows: response. Select capacitors with low ESR to minimize
resistive losses and optimize power transfer to the load.
⎛R ⎞ Differential Input
AV = 2⎜ F ⎟
⎝ RIN ⎠ The MAX9716 can be configured for a differential input.
The advantage of differential inputs is that any com-
Where AV is the desired voltage gain. Hence, an RIN of mon-mode noise is attenuated and not passed through
20kΩ and an RF of 20kΩ yields a gain of 2V/V, or 6dB. the amplifier. This input improves noise rejection and
RF can be either fixed or variable, allowing the use of a provides common-mode rejection (Figure 3). External
digitally controlled potentiometer to alter the gain under components should be closely matched for high
software control. CMRR. Figure 4 shows the MAX9716 configured for a
The gain of the MAX9717 in a single-ended output differential input.
configuration is half the gain when configured as BTL
output. Choose RF between 10kΩ and 50kΩ for the
MAX9716 and MAX9717A. Gains for the MAX9717B/C/D COMMON-MODE REJECTION RATIO
are set internally. vs. FREQUENCY
0
Input Filter VRIPPLE = 200mVP-P
-10 RL = 8Ω
CIN and RIN form a highpass filter that removes the DC CBIAS = 1µF
-20
bias from an incoming signal. The AC-coupling capaci-
tor allows the amplifier to bias the signal to an optimal -30
CMRR (dB)
______________________________________________________________________________________ 11
Low-Cost, Mono, 1.4W BTL Audio
Power Amplifiers
MAX9716/MAX9717
RF
20kΩ
VCC
220pF
VCC ON
CLICKLESS/POPLESS SHDN OFF
SHUTDOWN
CONTROL
BIAS
CBIAS OUT-
20kΩ
CIN RIN
0.33µF 20kΩ
AUDIO IN+ 20kΩ
INPUT
CIN RIN OUT+
0.33µF 20kΩ
AUDIO IN-
INPUT GND
MAX9716
RF
20kΩ
220pF
12 ______________________________________________________________________________________
Low-Cost, Mono, 1.4W BTL Audio
Power Amplifiers
UCSP Applications Information Ordering Information (continued)
MAX9716/MAX9717
For the latest application details on UCSP construction, PIN- GAIN
dimensions, tape carrier information, printed circuit board PART TEMP RANGE
PACKAGE (dB)
techniques, bump-pad layout, and recommended reflow
temperature profile, as well as the latest information on MAX9717AEBL+TG45 -40°C to +85°C 3 x 3 UCSP Adj.
reliability testing results, refer to the application note, MAX9717AETA+T -40°C to +85°C 8 TDFN-EP* Adj.
“UCSP—A Wafer-Level Chip-Scale Package” available MAX9717AEUA -40°C to +85°C 8 µMAX-EP* Adj.
on Maxim’s web site at http://www.maxim-ic.com/ucsp. MAX9717BEBL+TG45 -40°C to +85°C 3 x 3 UCSP 6
MAX9717BETA+T -40°C to +85°C 8 TDFN-EP* 6
UCSP Marking Information
MAX9717BEUA -40°C to +85°C 8 µMAX-EP* 6
Pin A1 Bump Indicator
MAX9717CEBL+TG45 -40°C to +85°C 3 x 3 UCSP 9
AAA: Product ID code AAA MAX9717CETA+T -40°C to +85°C 8 TDFN-EP* 9
XXX: Lot Code XXX
MAX9717CEUA -40°C to +85°C 8 µMAX-EP* 9
MAX9717DEBL+TG45 -40°C to +85°C 3 x 3 UCSP 12
MAX9717DETA+T -40°C to +85°C 8 TDFN-EP* 12
MAX9717DEUA -40°C to +85°C 8 µMAX-EP* 12
*EP = Exposed pad.
+Denotes a lead(Pb)-free/RoHS-compliant package.
G45 indicates protective die coating.
Selector Guide
PART BTL/SE INPUT GAIN (dB)
MAX9716 — Adjustable
MAX9717A √ Adjustable
MAX9717B √ 6
MAX9717C √ 9
MAX9717D √ 12
Chip Information
PROCESS: BiCMOS
______________________________________________________________________________________ 13
Low-Cost, Mono, 1.4W BTL Audio
Power Amplifiers
Pin/Bump Configurations
MAX9716/MAX9717
TOP VIEW
µMAX µMAX
MAX9716 MAX9717
TOP VIEW 1 2 3 1 2 3
(BUMPS ON BOTTOM)
A IN- OUT+ IN+ A IN- OUT+ BTL/SE
UCSP UCSP
(1.5mm x 1.5mm) (1.5mm x 1.5mm)
IN+ 3
MAX9716 6 VCC BTL/SE 3
MAX9717 6 VCC
TDFN TDFN
(3mm x 3mm x 0.8mm) (3mm x 3mm x 0.8mm)
14 ______________________________________________________________________________________
Low-Cost, Mono, 1.4W BTL Audio
Power Amplifiers
Functional Diagrams/Typical Operating Circuits
MAX9716/MAX9717
VCC
1µF
VCC ON
CLICKLESS/POPLESS SHDN OFF
SHUTDOWN
CONTROL
BIAS
CBIAS
1µF OUT-
20kΩ
IN+ 20kΩ
RF
40kΩ
VALUES SHOWN FOR 12dB GAIN.
VCC
1µF
VCC ON
CLICKLESS/POPLESS SHDN OFF
SHUTDOWN
CONTROL
BIAS
CBIAS
1µF OUT-
20kΩ 1kΩ
COUT
20kΩ 100µF
VCC
VALUES SHOWN FOR BTL 12dB GAIN, RF
HEADPHONE 6dB GAIN. 40kΩ
______________________________________________________________________________________ 15
Low-Cost, Mono, 1.4W BTL Audio
Power Amplifiers
Functional Diagrams/Typical Operating Circuits (continued)
MAX9716/MAX9717
VCC
1µF
VCC ON
CLICKLESS/POPLESS SHDN OFF
SHUTDOWN
CONTROL
BIAS
CBIAS
1µF OUT-
20kΩ 1kΩ
COUT
IN+ 20kΩ 100µF
VCC
MAX9717B
MAX9717C
MAX9717D
16 ______________________________________________________________________________________
Low-Cost, Mono, 1.4W BTL Audio
Power Amplifiers
Package Information
MAX9716/MAX9717
For the latest package outline information and land patterns (footprints), go to www.maxim-ic.com/packages. Note that a “+”, “#”, or
“-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing per-
tains to the package regardless of RoHS status.
LAND
PACKAGE TYPE PACKAGE CODE OUTLINE NO.
PATTERN NO.
8 µMAX U8E+2 21-0107 90-0145
8 TDFN-EP T833+1 21-0137 90-0059
9 UCSP B9+1 21-0093 —
______________________________________________________________________________________ 17
Low-Cost, Mono, 1.4W BTL Audio
Power Amplifiers
Package Information (continued)
MAX9716/MAX9717
For the latest package outline information and land patterns (footprints), go to www.maxim-ic.com/packages. Note that a "+", "#", or
"-" in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing per-
tains to the package regardless of RoHS status.
18 ______________________________________________________________________________________
Low-Cost, Mono, 1.4W BTL Audio
Power Amplifiers
Package Information (continued)
MAX9716/MAX9717
For the latest package outline information and land patterns (footprints), go to www.maxim-ic.com/packages. Note that a "+", "#", or
"-" in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing per-
tains to the package regardless of RoHS status.
______________________________________________________________________________________ 19
Low-Cost, Mono, 1.4W BTL Audio
Power Amplifiers
Package Information (continued)
MAX9716/MAX9717
For the latest package outline information and land patterns (footprints), go to www.maxim-ic.com/packages. Note that a "+", "#", or
"-" in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing per-
tains to the package regardless of RoHS status.
20 ______________________________________________________________________________________
Low-Cost, Mono, 1.4W BTL Audio
Power Amplifiers
Revision History
MAX9716/MAX9717
REVISION REVISION PAGES
DESCRIPTION
NUMBER DATE CHANGED
2 3/09 Added lead-free and G45 options to Ordering Information 1, 13
3 3/12 Add automotive qualified part 1
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. The parametric values (min and max limits) shown in
the Electrical Characteristics table are guaranteed. Other parametric values quoted in this data sheet are provided for guidance.
21 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2012 Maxim Integrated Products Maxim is a registered trademark of Maxim Integrated Products, Inc.