Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 82 views

    SFD & BMD PDF

    Uploaded by

    Rakesh Sapkota
    This document summarizes the design of a reinforced concrete slab. It provides the material properties, dimensions, and calculations for flexural demand and reinforcement requirements. The slab has a concrete grade of 35 N/mm^2, rebar grade of 500 N/mm^2, and dimensions of 1150mm depth, 1000mm width, and 1090mm effective depth. Calculations determine a limiting bending moment of 5555.81 KN-m and neutral axis depth of 501.4mm. The required rebar area for flexure is 1363mm^2. One layer of rebar with a diameter of 12mm spaced at 200mm is provided, totaling 2094.40mm^2, which meets the

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    SFD & BMD PDF

    Uploaded by

    Rakesh Sapkota
    82 views1 page
    This document summarizes the design of a reinforced concrete slab. It provides the material properties, dimensions, and calculations for flexural demand and reinforcement requirements. The slab has a concrete grade of 35 N/mm^2, rebar grade of 500 N/mm^2, and dimensions of 1150mm depth, 1000mm width, and 1090mm effective depth. Calculations determine a limiting bending moment of 5555.81 KN-m and neutral axis depth of 501.4mm. The required rebar area for flexure is 1363mm^2. One layer of rebar with a diameter of 12mm spaced at 200mm is provided, totaling 2094.40mm^2, which meets the

    Original Title

    sfd & bmd.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the design of a reinforced concrete slab. It provides the material properties, dimensions, and calculations for flexural demand and reinforcement requirements. The slab has a concrete grade of 35 N/mm^2, rebar grade of 500 N/mm^2, and dimensions of 1150mm depth, 1000mm width, and 1090mm effective depth. Calculations determine a limiting bending moment of 5555.81 KN-m and neutral axis depth of 501.4mm. The required rebar area for flexure is 1363mm^2. One layer of rebar with a diameter of 12mm spaced at 200mm is provided, totaling 2094.40mm^2, which meets the

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    82 views1 page

    SFD & BMD PDF

    Uploaded by

    Rakesh Sapkota
    This document summarizes the design of a reinforced concrete slab. It provides the material properties, dimensions, and calculations for flexural demand and reinforcement requirements. The slab has a concrete grade of 35 N/mm^2, rebar grade of 500 N/mm^2, and dimensions of 1150mm depth, 1000mm width, and 1090mm effective depth. Calculations determine a limiting bending moment of 5555.81 KN-m and neutral axis depth of 501.4mm. The required rebar area for flexure is 1363mm^2. One layer of rebar with a diameter of 12mm spaced at 200mm is provided, totaling 2094.40mm^2, which meets the

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Description Symbol Value Unit Remarks

    Grade of Concrete fck 35 N/mm^2


    Grade of rebar fy 500 N/mm^2
    Depth D 1150 mm
    Effective depth d 1090 mm
    Width b 1000 mm
    Cover c 50 mm
    Limiting Bending Moment Mu,lim 0.36*fck*b*xu*(d-0.42*xu)
    Limiting Neutral Axis Depth xu,max 0.46*d
    501.4 mm

    5555.81 KN-m
    Mu,lim Singly Reinforced
    Axial Load P 0 KN
    (In case of Wall
    1610 KN
    Clause 32.3.2; Check with 0.04*fck*Ag 0.04*fck*Ag only)
    Slab Design

    FLEXURAL DEMAND
    Bending Moment M22 292 KN-m
    Coefficient R2 Mu/b/d^2
    0.246
    Percentage of rebar due to flexure Pt,2,flexure fck/2/fy*(1-sqrt(1-4.598*R/fck))
    0.057 %
    Minimum percentage of rebar for slab Pt, min 0.125 %
    Rebar only for thermal stress

    Used effective depth d, used 1090.0 mm


    Use percentage of rebar per layer Pt, used 0.125 %
    Used area of section Ag 1090000 mm^2 `
    Required Area of rebar for flexure Ast 1363 mm^2

    Direct Tension T 0 KN
    Area of rebar from Tension per layer Ast, tension 0 mm^2
    Total rebar required (Flexure+Tension) Ast, Total 1363 mm^2

    Layers of rebar (for both Tension and Bending)


    Diameter of rebar Ф 20 mm
    Spacing S 150 mm
    No. of layers n 1 nos.
    Provided area of rebar Ast, provided 2094.40 mm^2
    Diameter of rebar Ф 12 mm
    Spacing S 200 mm

    You might also like