Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
98 views

Wind Calc

This document summarizes the calculation of wind pressure on building louvers based on given dimensions and wind load factors. It provides the basic wind velocity, velocity pressure, turbulence factors, and peak velocity pressure at different heights according to equations in the reference material. It then calculates the external pressure coefficient and resulting load pressure on the cladding based on the floor height and total loaded area using values from Tables 7.1 and NA.1-NA.2.18. The final load pressure is approximately 0.7 kN/m^2.

Uploaded by

ikanyu79
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
98 views

Wind Calc

This document summarizes the calculation of wind pressure on building louvers based on given dimensions and wind load factors. It provides the basic wind velocity, velocity pressure, turbulence factors, and peak velocity pressure at different heights according to equations in the reference material. It then calculates the external pressure coefficient and resulting load pressure on the cladding based on the floor height and total loaded area using values from Tables 7.1 and NA.1-NA.2.18. The final load pressure is approximately 0.7 kN/m^2.

Uploaded by

ikanyu79
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Wind Pressure on the Louvers

Basic information Ref


Bulding height H= 15.5 m
Greater Horizontal Dimension L= 126.8 m
Lesser Horizontal Dimension W= 67.7 m
Heifht of the structure z= 10.3 m
Fundamental value of the basic wind velocity vb,0 = 20 m/s

Wind Load Factor


Direction factor cdir = 1
Season factor cseason = 1

Terrain category
z0 = 0.05 Table NA.1
zmin = 2
3
Air Density ρ= 1.194 kg/m NA.2.18

Wind Load Calculation


Basic wind velocity vb = 20 m/s eq (4.1)
2
Basic velocity pressure qb = 0.2388 kN/m eq(4.10)
At Height of z
Peak Pressure
0.07
Terrain factor kr = 0.19 (z0/0.05) eq(4.5)
= 0.19
cr = krIn(z/z0)
= 1.012296
co = 1
mean velocity at a heigh z vm = cr.co.vb
= 20.24593
Characteristic peak velocity pressure, qp
Turbulence factor kI = 1 NA.2.16
Standard deviation σv = kr.vb.kl eq(4.6)
= 3.8
Turbulence intensity at height z lv(z) = σv/(vm(z)) eq(4.7)
0.187692
2
Characteristic peak velocity pressure, qp qp = [1+7.lv].1/2.ρ.vm (z) eq(4.8)
2
= 0.566218 kN/m

Cpe
h/d = 0.228951
Floor height hf = 4.3 m
2
Total loaded area A= 545.24 m

2
Because the loaded area is greater than 10m , therefore use cpe,10
Zone A cpe,10 = -1.2 Table 7.1
Zone B cpe,10 = -0.8
Zone D cpe,10 = 0.8
use cpe,10 = 0.8
2
Load pressurer on the cladding P= -0.67946 kN/m
2
= 0.7 kN/m

You might also like