Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 124 views

    Mir d245s & d45ks Rev.2

    Uploaded by

    open hartig
    This document provides information about a control valve feed system including: 1. Key components of the system including a feed pump capable of 9.6 GPM at 7.25 cubic inches and 3500 PSI, as well as a lower pressure regulator. 2. A diagram of the system showing the flow of material from the feed pump through the control valve and various sensors before reaching the load. 3. Safety devices are in place to prevent the cylinder jack from moving if the rod is not in the proper position at the end of the stroke.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Mir d245s & d45ks Rev.2

    Uploaded by

    open hartig
    124 views1 page
    This document provides information about a control valve feed system including: 1. Key components of the system including a feed pump capable of 9.6 GPM at 7.25 cubic inches and 3500 PSI, as well as a lower pressure regulator. 2. A diagram of the system showing the flow of material from the feed pump through the control valve and various sensors before reaching the load. 3. Safety devices are in place to prevent the cylinder jack from moving if the rod is not in the proper position at the end of the stroke.

    Original Description:

    D245S

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information about a control valve feed system including: 1. Key components of the system including a feed pump capable of 9.6 GPM at 7.25 cubic inches and 3500 PSI, as well as a lower pressure regulator. 2. A diagram of the system showing the flow of material from the feed pump through the control valve and various sensors before reaching the load. 3. Safety devices are in place to prevent the cylinder jack from moving if the rod is not in the proper position at the end of the stroke.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    124 views1 page

    Mir d245s & d45ks Rev.2

    Uploaded by

    open hartig
    This document provides information about a control valve feed system including: 1. Key components of the system including a feed pump capable of 9.6 GPM at 7.25 cubic inches and 3500 PSI, as well as a lower pressure regulator. 2. A diagram of the system showing the flow of material from the feed pump through the control valve and various sensors before reaching the load. 3. Safety devices are in place to prevent the cylinder jack from moving if the rod is not in the proper position at the end of the stroke.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    To Control valve Feed

    A
    FA

    DG

    FEED PUMP
    2076
    RPM 9.6 GPM 7.25 CU.IN, 65GPM
    3500 PSI 5 PSI

    C KG

    z D
    B

    HPS

    LPR

    A P
    A P

    MIR T
    T
    FEED
    FEED LOAD PRESS

    Optional
    CONTROL
    OVERIDE
    SENSING
    SOLENOID
    (FOS)
    A

    FVS
    FAST FEED CIRCUIT LPR

    RHU R1
    Proximity switch
    MAST INTERLOCK RELAY (MIR) 85
    CR
    86 Solenoid

    FUCNTION: 30 87a
    20 - 40Ω
    Savety device saat posisi rod cyl 5_AMP
    NC MIR
    Mast Interlock Relay
    tidak pada di atas (end stroke) PN : 0020006 - 003
    Maka cylinder jack tidak dapat B7

    digerakan. 24V

    R2
    85
    Pressure switch CR
    86
    APPLICATION
    Lower C/V
    D245S & D45KS 30 87

    N0

    You might also like